Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
  drm/i915/vlv: use per-pipe backlight controls v2
  drm/i915: make backlight functions take a connector
  drm/i915: move opregion asle request handling to a work queue
  drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
  drm/i915: Make intel_dp_is_edp() less specific
  drm/i915: Give names to the VBT child device type bits
  drm/i915/vlv: enable HDA display audio for Valleyview2
  drm/i915/dvo: call ->mode_set callback only when the port is running
  drm/i915: avoid unclaimed registers when capturing the error state
  drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
  drm/i915: scramble reset support for DP port CRC on vlv
  drm/i915: scramble reset support for DP port CRC on g4x
  drm/i916: add "auto" pipe CRC source
  ...

Conflicts:
	MAINTAINERS
	drivers/gpu/drm/i915/intel_panel.c
	drivers/gpu/drm/nouveau/core/subdev/mc/base.c
	drivers/gpu/drm/radeon/atombios_encoders.c
	drivers/gpu/drm/radeon/radeon_connectors.c

1 files changed, 28 insertions, 10 deletions

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index c4eaade..9fbe4dd 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -88,6 +88,7 @@
 
 #include <asm/io.h>
 #include <asm/reg.h>
+#include <asm/mpc85xx.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 #include <linux/module.h>
@@ -939,9 +940,8 @@ static void gfar_init_filer_table(struct gfar_private *priv)
 	}
 }
 
-static void gfar_detect_errata(struct gfar_private *priv)
+static void __gfar_detect_errata_83xx(struct gfar_private *priv)
 {
-	struct device *dev = &priv->ofdev->dev;
 	unsigned int pvr = mfspr(SPRN_PVR);
 	unsigned int svr = mfspr(SPRN_SVR);
 	unsigned int mod = (svr >> 16) & 0xfff6; /* w/o E suffix */
@@ -957,15 +957,33 @@ static void gfar_detect_errata(struct gfar_private *priv)
 	    (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0))
 		priv->errata |= GFAR_ERRATA_76;
 
-	/* MPC8313 and MPC837x all rev */
-	if ((pvr == 0x80850010 && mod == 0x80b0) ||
-	    (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0))
-		priv->errata |= GFAR_ERRATA_A002;
+	/* MPC8313 Rev < 2.0 */
+	if (pvr == 0x80850010 && mod == 0x80b0 && rev < 0x0020)
+		priv->errata |= GFAR_ERRATA_12;
+}
 
-	/* MPC8313 Rev < 2.0, MPC8548 rev 2.0 */
-	if ((pvr == 0x80850010 && mod == 0x80b0 && rev < 0x0020) ||
-	    (pvr == 0x80210020 && mod == 0x8030 && rev == 0x0020))
+static void __gfar_detect_errata_85xx(struct gfar_private *priv)
+{
+	unsigned int svr = mfspr(SPRN_SVR);
+
+	if ((SVR_SOC_VER(svr) == SVR_8548) && (SVR_REV(svr) == 0x20))
 		priv->errata |= GFAR_ERRATA_12;
+	if (((SVR_SOC_VER(svr) == SVR_P2020) && (SVR_REV(svr) < 0x20)) ||
+	    ((SVR_SOC_VER(svr) == SVR_P2010) && (SVR_REV(svr) < 0x20)))
+		priv->errata |= GFAR_ERRATA_76; /* aka eTSEC 20 */
+}
+
+static void gfar_detect_errata(struct gfar_private *priv)
+{
+	struct device *dev = &priv->ofdev->dev;
+
+	/* no plans to fix */
+	priv->errata |= GFAR_ERRATA_A002;
+
+	if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2))
+		__gfar_detect_errata_85xx(priv);
+	else /* non-mpc85xx parts, i.e. e300 core based */
+		__gfar_detect_errata_83xx(priv);
 
 	if (priv->errata)
 		dev_info(dev, "enabled errata workarounds, flags: 0x%x\n",
@@ -1599,7 +1617,7 @@ static int __gfar_is_rx_idle(struct gfar_private *priv)
 	/* Normaly TSEC should not hang on GRS commands, so we should
 	 * actually wait for IEVENT_GRSC flag.
 	 */
-	if (likely(!gfar_has_errata(priv, GFAR_ERRATA_A002)))
+	if (!gfar_has_errata(priv, GFAR_ERRATA_A002))
 		return 0;
 
 	/* Read the eTSEC register at offset 0xD1C. If bits 7-14 are