summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e/netdev.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-09-03 15:08:17 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2015-09-03 15:08:17 (GMT)
commitdd5cdb48edfd34401799056a9acf61078d773f90 (patch)
tree8e251fb4a4c196540fe9b6a6d8b13275f93a057c /drivers/net/ethernet/intel/e1000e/netdev.c
parent1e1a4e8f439113b7820bc7150569f685e1cc2b43 (diff)
parent62da98656b62a5ca57f22263705175af8ded5aa1 (diff)
downloadlinux-dd5cdb48edfd34401799056a9acf61078d773f90.tar.xz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Another merge window, another set of networking changes. I've heard rumblings that the lightweight tunnels infrastructure has been voted networking change of the year. But what do I know? 1) Add conntrack support to openvswitch, from Joe Stringer. 2) Initial support for VRF (Virtual Routing and Forwarding), which allows the segmentation of routing paths without using multiple devices. There are some semantic kinks to work out still, but this is a reasonably strong foundation. From David Ahern. 3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov. 4) Ignore route nexthops with a link down state in ipv6, just like ipv4. From Andy Gospodarek. 5) Remove spinlock from fast path of act_gact and act_mirred, from Eric Dumazet. 6) Document the DSA layer, from Florian Fainelli. 7) Add netconsole support to bcmgenet, systemport, and DSA. Also from Florian Fainelli. 8) Add Mellanox Switch Driver and core infrastructure, from Jiri Pirko. 9) Add support for "light weight tunnels", which allow for encapsulation and decapsulation without bearing the overhead of a full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of others. 10) Add Identifier Locator Addressing support for ipv6, from Tom Herbert. 11) Support fragmented SKBs in iwlwifi, from Johannes Berg. 12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia. 13) Add BQL support to 3c59x driver, from Loganaden Velvindron. 14) Stop using a zero TX queue length to mean that a device shouldn't have a qdisc attached, use an explicit flag instead. From Phil Sutter. 15) Use generic geneve netdevice infrastructure in openvswitch, from Pravin B Shelar. 16) Add infrastructure to avoid re-forwarding a packet in software that was already forwarded by a hardware switch. From Scott Feldman. 17) Allow AF_PACKET fanout function to be implemented in a bpf program, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits) netfilter: nf_conntrack: make nf_ct_zone_dflt built-in netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled net: fec: clear receive interrupts before processing a packet ipv6: fix exthdrs offload registration in out_rt path xen-netback: add support for multicast control bgmac: Update fixed_phy_register() sock, diag: fix panic in sock_diag_put_filterinfo flow_dissector: Use 'const' where possible. flow_dissector: Fix function argument ordering dependency ixgbe: Resolve "initialized field overwritten" warnings ixgbe: Remove bimodal SR-IOV disabling ixgbe: Add support for reporting 2.5G link speed ixgbe: fix bounds checking in ixgbe_setup_tc for 82598 ixgbe: support for ethtool set_rxfh ixgbe: Avoid needless PHY access on copper phys ixgbe: cleanup to use cached mask value ixgbe: Remove second instance of lan_id variable ixgbe: use kzalloc for allocating one thing flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c ixgbe: Remove unused PCI bus types ...
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c')
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c89
1 files changed, 64 insertions, 25 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 89d788d..faf4b3f 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -48,7 +48,7 @@
#define DRV_EXTRAVERSION "-k"
-#define DRV_VERSION "3.2.5" DRV_EXTRAVERSION
+#define DRV_VERSION "3.2.6" DRV_EXTRAVERSION
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
@@ -1737,12 +1737,6 @@ static void e1000_clean_rx_ring(struct e1000_ring *rx_ring)
rx_ring->next_to_clean = 0;
rx_ring->next_to_use = 0;
adapter->flags2 &= ~FLAG2_IS_DISCARDING;
-
- writel(0, rx_ring->head);
- if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
- e1000e_update_rdt_wa(rx_ring, 0);
- else
- writel(0, rx_ring->tail);
}
static void e1000e_downshift_workaround(struct work_struct *work)
@@ -2447,12 +2441,6 @@ static void e1000_clean_tx_ring(struct e1000_ring *tx_ring)
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
-
- writel(0, tx_ring->head);
- if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
- e1000e_update_tdt_wa(tx_ring, 0);
- else
- writel(0, tx_ring->tail);
}
/**
@@ -2954,6 +2942,12 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
tx_ring->head = adapter->hw.hw_addr + E1000_TDH(0);
tx_ring->tail = adapter->hw.hw_addr + E1000_TDT(0);
+ writel(0, tx_ring->head);
+ if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_tdt_wa(tx_ring, 0);
+ else
+ writel(0, tx_ring->tail);
+
/* Set the Tx Interrupt Delay register */
ew32(TIDV, adapter->tx_int_delay);
/* Tx irq moderation */
@@ -3275,6 +3269,12 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
rx_ring->head = adapter->hw.hw_addr + E1000_RDH(0);
rx_ring->tail = adapter->hw.hw_addr + E1000_RDT(0);
+ writel(0, rx_ring->head);
+ if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_rdt_wa(rx_ring, 0);
+ else
+ writel(0, rx_ring->tail);
+
/* Enable Receive Checksum Offload for TCP and UDP */
rxcsum = er32(RXCSUM);
if (adapter->netdev->features & NETIF_F_RXCSUM)
@@ -4280,18 +4280,29 @@ static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc)
struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter,
cc);
struct e1000_hw *hw = &adapter->hw;
+ u32 systimel_1, systimel_2, systimeh;
cycle_t systim, systim_next;
- /* SYSTIMH latching upon SYSTIML read does not work well. To fix that
- * we don't want to allow overflow of SYSTIML and a change to SYSTIMH
- * to occur between reads, so if we read a vale close to overflow, we
- * wait for overflow to occur and read both registers when its safe.
+ /* SYSTIMH latching upon SYSTIML read does not work well.
+ * This means that if SYSTIML overflows after we read it but before
+ * we read SYSTIMH, the value of SYSTIMH has been incremented and we
+ * will experience a huge non linear increment in the systime value
+ * to fix that we test for overflow and if true, we re-read systime.
*/
- u32 systim_overflow_latch_fix = 0x3FFFFFFF;
-
- do {
- systim = (cycle_t)er32(SYSTIML);
- } while (systim > systim_overflow_latch_fix);
- systim |= (cycle_t)er32(SYSTIMH) << 32;
+ systimel_1 = er32(SYSTIML);
+ systimeh = er32(SYSTIMH);
+ systimel_2 = er32(SYSTIML);
+ /* Check for overflow. If there was no overflow, use the values */
+ if (systimel_1 < systimel_2) {
+ systim = (cycle_t)systimel_1;
+ systim |= (cycle_t)systimeh << 32;
+ } else {
+ /* There was an overflow, read again SYSTIMH, and use
+ * systimel_2
+ */
+ systimeh = er32(SYSTIMH);
+ systim = (cycle_t)systimel_2;
+ systim |= (cycle_t)systimeh << 32;
+ }
if ((hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82583)) {
u64 incvalue, time_delta, rem, temp;
@@ -4588,6 +4599,7 @@ static int e1000_open(struct net_device *netdev)
return 0;
err_req_irq:
+ pm_qos_remove_request(&adapter->pm_qos_req);
e1000e_release_hw_control(adapter);
e1000_power_down_phy(adapter);
e1000e_free_rx_resources(adapter->rx_ring);
@@ -6316,6 +6328,33 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
return retval;
}
+ /* Ensure that the appropriate bits are set in LPI_CTRL
+ * for EEE in Sx
+ */
+ if ((hw->phy.type >= e1000_phy_i217) &&
+ adapter->eee_advert && hw->dev_spec.ich8lan.eee_lp_ability) {
+ u16 lpi_ctrl = 0;
+
+ retval = hw->phy.ops.acquire(hw);
+ if (!retval) {
+ retval = e1e_rphy_locked(hw, I82579_LPI_CTRL,
+ &lpi_ctrl);
+ if (!retval) {
+ if (adapter->eee_advert &
+ hw->dev_spec.ich8lan.eee_lp_ability &
+ I82579_EEE_100_SUPPORTED)
+ lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE;
+ if (adapter->eee_advert &
+ hw->dev_spec.ich8lan.eee_lp_ability &
+ I82579_EEE_1000_SUPPORTED)
+ lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE;
+
+ retval = e1e_wphy_locked(hw, I82579_LPI_CTRL,
+ lpi_ctrl);
+ }
+ }
+ hw->phy.ops.release(hw);
+ }
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant.
@@ -6465,7 +6504,7 @@ static int __e1000_resume(struct pci_dev *pdev)
if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
aspm_disable_flag |= PCIE_LINK_STATE_L1;
if (aspm_disable_flag)
- e1000e_disable_aspm_locked(pdev, aspm_disable_flag);
+ e1000e_disable_aspm(pdev, aspm_disable_flag);
pci_set_master(pdev);
@@ -6743,7 +6782,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
aspm_disable_flag |= PCIE_LINK_STATE_L1;
if (aspm_disable_flag)
- e1000e_disable_aspm(pdev, aspm_disable_flag);
+ e1000e_disable_aspm_locked(pdev, aspm_disable_flag);
err = pci_enable_device_mem(pdev);
if (err) {