Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

1 files changed, 54 insertions, 19 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index b6f424f..6368919 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2014 Intel Corporation.
+  Copyright(c) 1999 - 2015 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -848,6 +848,7 @@ struct ixgbe_thermal_sensor_data {
 #define IXGBE_MDIO_AUTO_NEG_LINK_STATUS	0x4 /* Indicates if link is up */
 
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK	0x7 /* Speed/Duplex Mask */
+#define IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK	0x6 /* Speed Mask */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10M_HALF 0x0 /* 10Mb/s Half Duplex */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10M_FULL 0x1 /* 10Mb/s Full Duplex */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_100M_HALF 0x2 /* 100Mb/s H Duplex */
@@ -856,6 +857,24 @@ struct ixgbe_thermal_sensor_data {
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL 0x5 /* 1Gb/s Full Duplex */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_HALF 0x6 /* 10Gb/s Half Duplex */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL 0x7 /* 10Gb/s Full Duplex */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB	0x4 /* 1Gb/s */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB	0x6 /* 10Gb/s */
+
+#define IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG	0x20	/* 10G Control Reg */
+#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400	/* 1G Provisioning 1 */
+#define IXGBE_MII_AUTONEG_XNP_TX_REG		0x17	/* 1G XNP Transmit */
+#define IXGBE_MII_AUTONEG_ADVERTISE_REG		0x10	/* 100M Advertisement */
+#define IXGBE_MII_10GBASE_T_ADVERTISE		0x1000	/* full duplex, bit:12*/
+#define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX	0x4000	/* full duplex, bit:14*/
+#define IXGBE_MII_1GBASE_T_ADVERTISE		0x8000	/* full duplex, bit:15*/
+#define IXGBE_MII_2_5GBASE_T_ADVERTISE		0x0400
+#define IXGBE_MII_5GBASE_T_ADVERTISE		0x0800
+#define IXGBE_MII_100BASE_T_ADVERTISE		0x0100	/* full duplex, bit:8 */
+#define IXGBE_MII_100BASE_T_ADVERTISE_HALF	0x0080	/* half duplex, bit:7 */
+#define IXGBE_MII_RESTART			0x200
+#define IXGBE_MII_AUTONEG_COMPLETE		0x20
+#define IXGBE_MII_AUTONEG_LINK_UP		0x04
+#define IXGBE_MII_AUTONEG_REG			0x0
 
 /* Management */
 #define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */
@@ -1305,6 +1324,7 @@ struct ixgbe_thermal_sensor_data {
 #define IXGBE_MDIO_AUTO_NEG_CONTROL	0x0 /* AUTO_NEG Control Reg */
 #define IXGBE_MDIO_AUTO_NEG_STATUS	0x1 /* AUTO_NEG Status Reg */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_STAT	0xC800 /* AUTO_NEG Vendor Status Reg */
+#define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM  0xCC00 /* AUTO_NEG Vendor TX Reg */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2 0xCC01 /* AUTO_NEG Vendor Tx Reg */
 #define IXGBE_MDIO_AUTO_NEG_VEN_LSC	0x1 /* AUTO_NEG Vendor Tx LSC */
 #define IXGBE_MDIO_AUTO_NEG_ADVT	0x10 /* AUTO_NEG Advt Reg */
@@ -1312,7 +1332,8 @@ struct ixgbe_thermal_sensor_data {
 #define IXGBE_MDIO_AUTO_NEG_EEE_ADVT	0x3C /* AUTO_NEG EEE Advt Reg */
 
 #define IXGBE_MDIO_PHY_SET_LOW_POWER_MODE	 0x0800 /* Set low power mode */
-
+#define IXGBE_AUTO_NEG_LP_STATUS	0xE820 /* AUTO NEG Rx LP Status Reg */
+#define IXGBE_AUTO_NEG_LP_1000BASE_CAP	0x8000 /* AUTO NEG Rx LP 1000BaseT */
 #define IXGBE_MDIO_TX_VENDOR_ALARMS_3	0xCC02 /* Vendor Alarms 3 Reg */
 #define IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK 0x3 /* PHY Reset Complete Mask */
 #define IXGBE_MDIO_GLOBAL_RES_PR_10 0xC479 /* Global Resv Provisioning 10 Reg */
@@ -2041,6 +2062,11 @@ enum {
 #define IXGBE_NVM_POLL_WRITE       1  /* Flag for polling for write complete */
 #define IXGBE_NVM_POLL_READ        0  /* Flag for polling for read complete */
 
+#define NVM_INIT_CTRL_3			0x38
+#define NVM_INIT_CTRL_3_LPLU		0x8
+#define NVM_INIT_CTRL_3_D10GMP_PORT0	0x40
+#define NVM_INIT_CTRL_3_D10GMP_PORT1	0x100
+
 #define IXGBE_EEPROM_PAGE_SIZE_MAX       128
 #define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* EEPROM words # read in burst */
 #define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* EEPROM words # wr in burst */
@@ -2540,9 +2566,11 @@ enum ixgbe_fdir_pballoc_type {
 #define IXGBE_FDIRCMD_QUEUE_EN                  0x00008000
 #define IXGBE_FDIRCMD_FLOW_TYPE_SHIFT           5
 #define IXGBE_FDIRCMD_RX_QUEUE_SHIFT            16
+#define IXGBE_FDIRCMD_RX_TUNNEL_FILTER_SHIFT	23
 #define IXGBE_FDIRCMD_VT_POOL_SHIFT             24
 #define IXGBE_FDIR_INIT_DONE_POLL               10
 #define IXGBE_FDIRCMD_CMD_POLL                  10
+#define IXGBE_FDIRCMD_TUNNEL_FILTER		0x00800000
 
 #define IXGBE_FDIR_DROP_QUEUE                   127
 
@@ -2833,12 +2861,13 @@ typedef u32 ixgbe_link_speed;
 #define IXGBE_ATR_SIGNATURE_HASH_KEY 0x174D3614
 
 /* Software ATR input stream values and masks */
-#define IXGBE_ATR_HASH_MASK     0x7fff
-#define IXGBE_ATR_L4TYPE_MASK      0x3
-#define IXGBE_ATR_L4TYPE_UDP       0x1
-#define IXGBE_ATR_L4TYPE_TCP       0x2
-#define IXGBE_ATR_L4TYPE_SCTP      0x3
-#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4
+#define IXGBE_ATR_HASH_MASK		0x7fff
+#define IXGBE_ATR_L4TYPE_MASK		0x3
+#define IXGBE_ATR_L4TYPE_UDP		0x1
+#define IXGBE_ATR_L4TYPE_TCP		0x2
+#define IXGBE_ATR_L4TYPE_SCTP		0x3
+#define IXGBE_ATR_L4TYPE_IPV6_MASK	0x4
+#define IXGBE_ATR_L4TYPE_TUNNEL_MASK	0x10
 enum ixgbe_atr_flow_type {
 	IXGBE_ATR_FLOW_TYPE_IPV4   = 0x0,
 	IXGBE_ATR_FLOW_TYPE_UDPV4  = 0x1,
@@ -3035,9 +3064,8 @@ enum ixgbe_smart_speed {
 /* PCI bus types */
 enum ixgbe_bus_type {
 	ixgbe_bus_type_unknown = 0,
-	ixgbe_bus_type_pci,
-	ixgbe_bus_type_pcix,
 	ixgbe_bus_type_pci_express,
+	ixgbe_bus_type_internal,
 	ixgbe_bus_type_reserved
 };
 
@@ -3298,6 +3326,7 @@ struct ixgbe_phy_operations {
 	s32 (*write_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val);
 	s32 (*check_overtemp)(struct ixgbe_hw *);
 	s32 (*set_phy_power)(struct ixgbe_hw *, bool on);
+	s32 (*enter_lplu)(struct ixgbe_hw *);
 	s32 (*handle_lasi)(struct ixgbe_hw *hw);
 };
 
@@ -3308,6 +3337,7 @@ struct ixgbe_eeprom_info {
 	u16                             word_size;
 	u16                             address_bits;
 	u16                             word_page_size;
+	u16				ctrl_word_3;
 };
 
 #define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED	0x01
@@ -3351,10 +3381,10 @@ struct ixgbe_phy_info {
 	bool                            sfp_setup_needed;
 	u32                             revision;
 	enum ixgbe_media_type           media_type;
-	u8				lan_id;
 	u32				phy_semaphore_mask;
 	bool                            reset_disable;
 	ixgbe_autoneg_advertised        autoneg_advertised;
+	ixgbe_link_speed		speeds_supported;
 	enum ixgbe_smart_speed          smart_speed;
 	bool                            smart_speed_active;
 	bool                            multispeed_fiber;
@@ -3460,16 +3490,21 @@ struct ixgbe_info {
 #define IXGBE_ERR_PBA_SECTION                   -31
 #define IXGBE_ERR_INVALID_ARGUMENT              -32
 #define IXGBE_ERR_HOST_INTERFACE_COMMAND        -33
+#define IXGBE_ERR_FDIR_CMD_INCOMPLETE		-38
 #define IXGBE_NOT_IMPLEMENTED                   0x7FFFFFFF
 
-#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P)	((P == 0) ? (0x4010) : (0x8010))
-#define IXGBE_KRM_LINK_CTRL_1(P)	((P == 0) ? (0x420C) : (0x820C))
-#define IXGBE_KRM_DSP_TXFFE_STATE_4(P)	((P == 0) ? (0x4634) : (0x8634))
-#define IXGBE_KRM_DSP_TXFFE_STATE_5(P)	((P == 0) ? (0x4638) : (0x8638))
-#define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P)	((P == 0) ? (0x4B00) : (0x8B00))
-#define IXGBE_KRM_PMD_DFX_BURNIN(P)	((P == 0) ? (0x4E00) : (0x8E00))
-#define IXGBE_KRM_TX_COEFF_CTRL_1(P)	((P == 0) ? (0x5520) : (0x9520))
-#define IXGBE_KRM_RX_ANA_CTL(P)		((P == 0) ? (0x5A00) : (0x9A00))
+#define IXGBE_FUSES0_GROUP(_i)		(0x11158 + ((_i) * 4))
+#define IXGBE_FUSES0_300MHZ		BIT(5)
+#define IXGBE_FUSES0_REV1		BIT(6)
+
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P)	((P) ? 0x8010 : 0x4010)
+#define IXGBE_KRM_LINK_CTRL_1(P)	((P) ? 0x820C : 0x420C)
+#define IXGBE_KRM_DSP_TXFFE_STATE_4(P)	((P) ? 0x8634 : 0x4634)
+#define IXGBE_KRM_DSP_TXFFE_STATE_5(P)	((P) ? 0x8638 : 0x4638)
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P)	((P) ? 0x8B00 : 0x4B00)
+#define IXGBE_KRM_PMD_DFX_BURNIN(P)	((P) ? 0x8E00 : 0x4E00)
+#define IXGBE_KRM_TX_COEFF_CTRL_1(P)	((P) ? 0x9520 : 0x5520)
+#define IXGBE_KRM_RX_ANA_CTL(P)		((P) ? 0x9A00 : 0x5A00)
 
 #define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B		(1 << 9)
 #define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS		(1 << 11)