diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-12-11 22:27:06 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-12-11 22:27:06 (GMT) |
commit | 70e71ca0af244f48a5dcf56dc435243792e3a495 (patch) | |
tree | f7d9c4c4d9a857a00043e9bf6aa2d6f533a34778 /drivers/net/ethernet/marvell/pxa168_eth.c | |
parent | bae41e45b7400496b9bf0c70c6004419d9987819 (diff) | |
parent | 00c83b01d58068dfeb2e1351cca6fccf2a83fa8f (diff) | |
download | linux-70e71ca0af244f48a5dcf56dc435243792e3a495.tar.xz |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
1) New offloading infrastructure and example 'rocker' driver for
offloading of switching and routing to hardware.
This work was done by a large group of dedicated individuals, not
limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend,
Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu
2) Start making the networking operate on IOV iterators instead of
modifying iov objects in-situ during transfers. Thanks to Al Viro
and Herbert Xu.
3) A set of new netlink interfaces for the TIPC stack, from Richard
Alpe.
4) Remove unnecessary looping during ipv6 routing lookups, from Martin
KaFai Lau.
5) Add PAUSE frame generation support to gianfar driver, from Matei
Pavaluca.
6) Allow for larger reordering levels in TCP, which are easily
achievable in the real world right now, from Eric Dumazet.
7) Add a variable of napi_schedule that doesn't need to disable cpu
interrupts, from Eric Dumazet.
8) Use a doubly linked list to optimize neigh_parms_release(), from
Nicolas Dichtel.
9) Various enhancements to the kernel BPF verifier, and allow eBPF
programs to actually be attached to sockets. From Alexei
Starovoitov.
10) Support TSO/LSO in sunvnet driver, from David L Stevens.
11) Allow controlling ECN usage via routing metrics, from Florian
Westphal.
12) Remote checksum offload, from Tom Herbert.
13) Add split-header receive, BQL, and xmit_more support to amd-xgbe
driver, from Thomas Lendacky.
14) Add MPLS support to openvswitch, from Simon Horman.
15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen
Klassert.
16) Do gro flushes on a per-device basis using a timer, from Eric
Dumazet. This tries to resolve the conflicting goals between the
desired handling of bulk vs. RPC-like traffic.
17) Allow userspace to ask for the CPU upon what a packet was
received/steered, via SO_INCOMING_CPU. From Eric Dumazet.
18) Limit GSO packets to half the current congestion window, from Eric
Dumazet.
19) Add a generic helper so that all drivers set their RSS keys in a
consistent way, from Eric Dumazet.
20) Add xmit_more support to enic driver, from Govindarajulu
Varadarajan.
21) Add VLAN packet scheduler action, from Jiri Pirko.
22) Support configurable RSS hash functions via ethtool, from Eyal
Perry.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits)
Fix race condition between vxlan_sock_add and vxlan_sock_release
net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
net/mlx4: Add support for A0 steering
net/mlx4: Refactor QUERY_PORT
net/mlx4_core: Add explicit error message when rule doesn't meet configuration
net/mlx4: Add A0 hybrid steering
net/mlx4: Add mlx4_bitmap zone allocator
net/mlx4: Add a check if there are too many reserved QPs
net/mlx4: Change QP allocation scheme
net/mlx4_core: Use tasklet for user-space CQ completion events
net/mlx4_core: Mask out host side virtualization features for guests
net/mlx4_en: Set csum level for encapsulated packets
be2net: Export tunnel offloads only when a VxLAN tunnel is created
gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
net: fec: only enable mdio interrupt before phy device link up
net: fec: clear all interrupt events to support i.MX6SX
net: fec: reset fep link status in suspend function
net: sock: fix access via invalid file descriptor
net: introduce helper macro for_each_cmsghdr
...
Diffstat (limited to 'drivers/net/ethernet/marvell/pxa168_eth.c')
-rw-r--r-- | drivers/net/ethernet/marvell/pxa168_eth.c | 258 |
1 files changed, 104 insertions, 154 deletions
diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index c3b209c..af829c5 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -106,6 +106,7 @@ #define SDMA_CMD_ERD (1 << 7) /* Bit definitions of the Port Config Reg */ +#define PCR_DUPLEX_FULL (1 << 15) #define PCR_HS (1 << 12) #define PCR_EN (1 << 7) #define PCR_PM (1 << 0) @@ -113,11 +114,17 @@ /* Bit definitions of the Port Config Extend Reg */ #define PCXR_2BSM (1 << 28) #define PCXR_DSCP_EN (1 << 21) +#define PCXR_RMII_EN (1 << 20) +#define PCXR_AN_SPEED_DIS (1 << 19) +#define PCXR_SPEED_100 (1 << 18) #define PCXR_MFL_1518 (0 << 14) #define PCXR_MFL_1536 (1 << 14) #define PCXR_MFL_2048 (2 << 14) #define PCXR_MFL_64K (3 << 14) +#define PCXR_FLOWCTL_DIS (1 << 12) #define PCXR_FLP (1 << 11) +#define PCXR_AN_FLOWCTL_DIS (1 << 10) +#define PCXR_AN_DUPLEX_DIS (1 << 9) #define PCXR_PRIO_TX_OFF 3 #define PCXR_TX_HIGH_PRI (7 << PCXR_PRIO_TX_OFF) @@ -170,7 +177,6 @@ #define LINK_UP (1 << 3) /* Bit definitions for work to be done */ -#define WORK_LINK (1 << 0) #define WORK_TX_DONE (1 << 1) /* @@ -197,6 +203,9 @@ struct tx_desc { struct pxa168_eth_private { int port_num; /* User Ethernet port number */ int phy_addr; + int phy_speed; + int phy_duplex; + phy_interface_t phy_intf; int rx_resource_err; /* Rx ring resource error flag */ @@ -269,11 +278,11 @@ enum hash_table_entry { static int pxa168_get_settings(struct net_device *dev, struct ethtool_cmd *cmd); static int pxa168_set_settings(struct net_device *dev, struct ethtool_cmd *cmd); static int pxa168_init_hw(struct pxa168_eth_private *pep); +static int pxa168_init_phy(struct net_device *dev); static void eth_port_reset(struct net_device *dev); static void eth_port_start(struct net_device *dev); static int pxa168_eth_open(struct net_device *dev); static int pxa168_eth_stop(struct net_device *dev); -static int ethernet_phy_setup(struct net_device *dev); static inline u32 rdl(struct pxa168_eth_private *pep, int offset) { @@ -305,26 +314,6 @@ static void abort_dma(struct pxa168_eth_private *pep) netdev_err(pep->dev, "%s : DMA Stuck\n", __func__); } -static int ethernet_phy_get(struct pxa168_eth_private *pep) -{ - unsigned int reg_data; - - reg_data = rdl(pep, PHY_ADDRESS); - - return (reg_data >> (5 * pep->port_num)) & 0x1f; -} - -static void ethernet_phy_set_addr(struct pxa168_eth_private *pep, int phy_addr) -{ - u32 reg_data; - int addr_shift = 5 * pep->port_num; - - reg_data = rdl(pep, PHY_ADDRESS); - reg_data &= ~(0x1f << addr_shift); - reg_data |= (phy_addr & 0x1f) << addr_shift; - wrl(pep, PHY_ADDRESS, reg_data); -} - static void rxq_refill(struct net_device *dev) { struct pxa168_eth_private *pep = netdev_priv(dev); @@ -655,14 +644,7 @@ static void eth_port_start(struct net_device *dev) struct pxa168_eth_private *pep = netdev_priv(dev); int tx_curr_desc, rx_curr_desc; - /* Perform PHY reset, if there is a PHY. */ - if (pep->phy != NULL) { - struct ethtool_cmd cmd; - - pxa168_get_settings(pep->dev, &cmd); - phy_init_hw(pep->phy); - pxa168_set_settings(pep->dev, &cmd); - } + phy_start(pep->phy); /* Assignment of Tx CTRP of given queue */ tx_curr_desc = pep->tx_curr_desc_q; @@ -717,6 +699,8 @@ static void eth_port_reset(struct net_device *dev) val = rdl(pep, PORT_CONFIG); val &= ~PCR_EN; wrl(pep, PORT_CONFIG, val); + + phy_stop(pep->phy); } /* @@ -884,43 +868,9 @@ static int pxa168_eth_collect_events(struct pxa168_eth_private *pep, } if (icr & ICR_RXBUF) ret = 1; - if (icr & ICR_MII_CH) { - pep->work_todo |= WORK_LINK; - ret = 1; - } return ret; } -static void handle_link_event(struct pxa168_eth_private *pep) -{ - struct net_device *dev = pep->dev; - u32 port_status; - int speed; - int duplex; - int fc; - - port_status = rdl(pep, PORT_STATUS); - if (!(port_status & LINK_UP)) { - if (netif_carrier_ok(dev)) { - netdev_info(dev, "link down\n"); - netif_carrier_off(dev); - txq_reclaim(dev, 1); - } - return; - } - if (port_status & PORT_SPEED_100) - speed = 100; - else - speed = 10; - - duplex = (port_status & FULL_DUPLEX) ? 1 : 0; - fc = (port_status & FLOW_CONTROL_DISABLED) ? 0 : 1; - netdev_info(dev, "link up, %d Mb/s, %s duplex, flow control %sabled\n", - speed, duplex ? "full" : "half", fc ? "en" : "dis"); - if (!netif_carrier_ok(dev)) - netif_carrier_on(dev); -} - static irqreturn_t pxa168_eth_int_handler(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; @@ -978,8 +928,11 @@ static int set_port_config_ext(struct pxa168_eth_private *pep) skb_size = PCXR_MFL_64K; /* Extended Port Configuration */ - wrl(pep, - PORT_CONFIG_EXT, PCXR_2BSM | /* Two byte prefix aligns IP hdr */ + wrl(pep, PORT_CONFIG_EXT, + PCXR_AN_SPEED_DIS | /* Disable HW AN */ + PCXR_AN_DUPLEX_DIS | + PCXR_AN_FLOWCTL_DIS | + PCXR_2BSM | /* Two byte prefix aligns IP hdr */ PCXR_DSCP_EN | /* Enable DSCP in IP */ skb_size | PCXR_FLP | /* do not force link pass */ PCXR_TX_HIGH_PRI); /* Transmit - high priority queue */ @@ -987,6 +940,69 @@ static int set_port_config_ext(struct pxa168_eth_private *pep) return 0; } +static void pxa168_eth_adjust_link(struct net_device *dev) +{ + struct pxa168_eth_private *pep = netdev_priv(dev); + struct phy_device *phy = pep->phy; + u32 cfg, cfg_o = rdl(pep, PORT_CONFIG); + u32 cfgext, cfgext_o = rdl(pep, PORT_CONFIG_EXT); + + cfg = cfg_o & ~PCR_DUPLEX_FULL; + cfgext = cfgext_o & ~(PCXR_SPEED_100 | PCXR_FLOWCTL_DIS | PCXR_RMII_EN); + + if (phy->interface == PHY_INTERFACE_MODE_RMII) + cfgext |= PCXR_RMII_EN; + if (phy->speed == SPEED_100) + cfgext |= PCXR_SPEED_100; + if (phy->duplex) + cfg |= PCR_DUPLEX_FULL; + if (!phy->pause) + cfgext |= PCXR_FLOWCTL_DIS; + + /* Bail out if there has nothing changed */ + if (cfg == cfg_o && cfgext == cfgext_o) + return; + + wrl(pep, PORT_CONFIG, cfg); + wrl(pep, PORT_CONFIG_EXT, cfgext); + + phy_print_status(phy); +} + +static int pxa168_init_phy(struct net_device *dev) +{ + struct pxa168_eth_private *pep = netdev_priv(dev); + struct ethtool_cmd cmd; + int err; + + if (pep->phy) + return 0; + + pep->phy = mdiobus_scan(pep->smi_bus, pep->phy_addr); + if (!pep->phy) + return -ENODEV; + + err = phy_connect_direct(dev, pep->phy, pxa168_eth_adjust_link, + pep->phy_intf); + if (err) + return err; + + err = pxa168_get_settings(dev, &cmd); + if (err) + return err; + + cmd.phy_address = pep->phy_addr; + cmd.speed = pep->phy_speed; + cmd.duplex = pep->phy_duplex; + cmd.advertising = PHY_BASIC_FEATURES; + cmd.autoneg = AUTONEG_ENABLE; + + if (cmd.speed != 0) + cmd.autoneg = AUTONEG_DISABLE; + + return pxa168_set_settings(dev, &cmd); +} + static int pxa168_init_hw(struct pxa168_eth_private *pep) { int err = 0; @@ -1133,6 +1149,10 @@ static int pxa168_eth_open(struct net_device *dev) struct pxa168_eth_private *pep = netdev_priv(dev); int err; + err = pxa168_init_phy(dev); + if (err) + return err; + err = request_irq(dev->irq, pxa168_eth_int_handler, 0, dev->name, dev); if (err) { dev_err(&dev->dev, "can't assign irq\n"); @@ -1153,8 +1173,8 @@ static int pxa168_eth_open(struct net_device *dev) pep->rx_used_desc_q = 0; pep->rx_curr_desc_q = 0; netif_carrier_off(dev); - eth_port_start(dev); napi_enable(&pep->napi); + eth_port_start(dev); return 0; out_free_rx_skb: rxq_deinit(dev); @@ -1231,10 +1251,6 @@ static int pxa168_rx_poll(struct napi_struct *napi, int budget) struct net_device *dev = pep->dev; int work_done = 0; - if (unlikely(pep->work_todo & WORK_LINK)) { - pep->work_todo &= ~(WORK_LINK); - handle_link_event(pep); - } /* * We call txq_reclaim every time since in NAPI interupts are disabled * and due to this we miss the TX_DONE interrupt,which is not updated in @@ -1357,77 +1373,6 @@ static int pxa168_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, return -EOPNOTSUPP; } -static struct phy_device *phy_scan(struct pxa168_eth_private *pep, int phy_addr) -{ - struct mii_bus *bus = pep->smi_bus; - struct phy_device *phydev; - int start; - int num; - int i; - - if (phy_addr == PXA168_ETH_PHY_ADDR_DEFAULT) { - /* Scan entire range */ - start = ethernet_phy_get(pep); - num = 32; - } else { - /* Use phy addr specific to platform */ - start = phy_addr & 0x1f; - num = 1; - } - phydev = NULL; - for (i = 0; i < num; i++) { - int addr = (start + i) & 0x1f; - if (bus->phy_map[addr] == NULL) - mdiobus_scan(bus, addr); - - if (phydev == NULL) { - phydev = bus->phy_map[addr]; - if (phydev != NULL) - ethernet_phy_set_addr(pep, addr); - } - } - - return phydev; -} - -static void phy_init(struct pxa168_eth_private *pep) -{ - struct phy_device *phy = pep->phy; - - phy_attach(pep->dev, dev_name(&phy->dev), PHY_INTERFACE_MODE_MII); - - if (pep->pd && pep->pd->speed != 0) { - phy->autoneg = AUTONEG_DISABLE; - phy->advertising = 0; - phy->speed = pep->pd->speed; - phy->duplex = pep->pd->duplex; - } else { - phy->autoneg = AUTONEG_ENABLE; - phy->speed = 0; - phy->duplex = 0; - phy->supported &= PHY_BASIC_FEATURES; - phy->advertising = phy->supported | ADVERTISED_Autoneg; - } - - phy_start_aneg(phy); -} - -static int ethernet_phy_setup(struct net_device *dev) -{ - struct pxa168_eth_private *pep = netdev_priv(dev); - - if (pep->pd && pep->pd->init) - pep->pd->init(); - - pep->phy = phy_scan(pep, pep->phy_addr & 0x1f); - if (pep->phy != NULL) - phy_init(pep); - - update_hash_table_mac_address(pep, NULL, dev->dev_addr); - - return 0; -} - static int pxa168_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct pxa168_eth_private *pep = netdev_priv(dev); @@ -1505,16 +1450,14 @@ static int pxa168_eth_probe(struct platform_device *pdev) pep = netdev_priv(dev); pep->dev = dev; pep->clk = clk; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - err = -ENODEV; - goto err_netdev; - } pep->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(pep->base)) { err = -ENOMEM; goto err_netdev; } + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); BUG_ON(!res); dev->irq = res->start; @@ -1552,13 +1495,23 @@ static int pxa168_eth_probe(struct platform_device *pdev) pep->port_num = pep->pd->port_number; pep->phy_addr = pep->pd->phy_addr; + pep->phy_speed = pep->pd->speed; + pep->phy_duplex = pep->pd->duplex; + pep->phy_intf = pep->pd->intf; + + if (pep->pd->init) + pep->pd->init(); } else if (pdev->dev.of_node) { of_property_read_u32(pdev->dev.of_node, "port-id", &pep->port_num); np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); - if (np) - of_property_read_u32(np, "reg", &pep->phy_addr); + if (!np) { + dev_err(&pdev->dev, "missing phy-handle\n"); + return -EINVAL; + } + of_property_read_u32(np, "reg", &pep->phy_addr); + pep->phy_intf = of_get_phy_mode(pdev->dev.of_node); } /* Hardware supports only 3 ports */ @@ -1587,11 +1540,8 @@ static int pxa168_eth_probe(struct platform_device *pdev) if (err) goto err_free_mdio; - pxa168_init_hw(pep); - err = ethernet_phy_setup(dev); - if (err) - goto err_mdiobus; SET_NETDEV_DEV(dev, &pdev->dev); + pxa168_init_hw(pep); err = register_netdev(dev); if (err) goto err_mdiobus; @@ -1621,13 +1571,13 @@ static int pxa168_eth_remove(struct platform_device *pdev) pep->htpr, pep->htpr_dma); pep->htpr = NULL; } + if (pep->phy) + phy_disconnect(pep->phy); if (pep->clk) { clk_disable(pep->clk); clk_put(pep->clk); pep->clk = NULL; } - if (pep->phy != NULL) - phy_detach(pep->phy); iounmap(pep->base); pep->base = NULL; |