net/mlx4: Add support for A0 steering

Add the required firmware commands for A0 steering and a way to enable
that. The firmware support focuses on INIT_HCA, QUERY_HCA, QUERY_PORT,
QUERY_DEV_CAP and QUERY_FUNC_CAP commands. Those commands are used
to configure and query the device.

The different A0 DMFS (steering) modes are:

Static - optimized performance, but flow steering rules are
limited. This mode should be choosed explicitly by the user
in order to be used.

Dynamic - this mode should be explicitly choosed by the user.
In this mode, the FW works in optimized steering mode as long as
it can and afterwards automatically drops to classic (full) DMFS.

Disable - this mode should be explicitly choosed by the user.
The user instructs the system not to use optimized steering, even if
the FW supports Dynamic A0 DMFS (and thus will be able to use optimized
steering in Default A0 DMFS mode).

Default - this mode is implicitly choosed. In this mode, if the FW
supports Dynamic A0 DMFS, it'll work in this mode. Otherwise, it'll
work at Disable A0 DMFS mode.

Under SRIOV configuration, when the A0 steering mode is enabled,
older guest VF drivers who aren't using the RX QP allocation flag
(MLX4_RESERVE_A0_QP) will get a QP from the general range and
fail when attempting to register a steering rule. To avoid that,
the PF context behaviour is changed once on A0 static mode, to
require support for the allocation flag in VF drivers too.

In order to enable A0 steering, we use log_num_mgm_entry_size param.
If the value of the parameter is not positive, we treat the absolute
value of log_num_mgm_entry_size as a bit field. Setting bit 2 of this
bit field enables static A0 steering.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 45 insertions, 3 deletions

diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 073b3d1..ef3b95b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -144,7 +144,8 @@ static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags)
 		[15] = "Ethernet Backplane autoneg support",
 		[16] = "CONFIG DEV support",
 		[17] = "Asymmetric EQs support",
-		[18] = "More than 80 VFs support"
+		[18] = "More than 80 VFs support",
+		[19] = "Performance optimized for limited rule configuration flow steering support"
 	};
 	int i;
 
@@ -680,6 +681,8 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 #define QUERY_DEV_CAP_FW_REASSIGN_MAC		0x9d
 #define QUERY_DEV_CAP_VXLAN			0x9e
 #define QUERY_DEV_CAP_MAD_DEMUX_OFFSET		0xb0
+#define QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_BASE_OFFSET	0xa8
+#define QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_RANGE_OFFSET	0xac
 
 	dev_cap->flags2 = 0;
 	mailbox = mlx4_alloc_cmd_mailbox(dev);
@@ -876,6 +879,13 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 	if (field32 & (1 << 0))
 		dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_MAD_DEMUX;
 
+	MLX4_GET(dev_cap->dmfs_high_rate_qpn_base, outbox,
+		 QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_BASE_OFFSET);
+	dev_cap->dmfs_high_rate_qpn_base &= MGM_QPN_MASK;
+	MLX4_GET(dev_cap->dmfs_high_rate_qpn_range, outbox,
+		 QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_RANGE_OFFSET);
+	dev_cap->dmfs_high_rate_qpn_range &= MGM_QPN_MASK;
+
 	MLX4_GET(field32, outbox, QUERY_DEV_CAP_EXT_2_FLAGS_OFFSET);
 	if (field32 & (1 << 16))
 		dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_UPDATE_QP;
@@ -935,6 +945,10 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 	mlx4_dbg(dev, "Max GSO size: %d\n", dev_cap->max_gso_sz);
 	mlx4_dbg(dev, "Max counters: %d\n", dev_cap->max_counters);
 	mlx4_dbg(dev, "Max RSS Table size: %d\n", dev_cap->max_rss_tbl_sz);
+	mlx4_dbg(dev, "DMFS high rate steer QPn base: %d\n",
+		 dev_cap->dmfs_high_rate_qpn_base);
+	mlx4_dbg(dev, "DMFS high rate steer QPn range: %d\n",
+		 dev_cap->dmfs_high_rate_qpn_range);
 
 	dump_dev_cap_flags(dev, dev_cap->flags);
 	dump_dev_cap_flags2(dev, dev_cap->flags2);
@@ -996,6 +1010,7 @@ int mlx4_QUERY_PORT(struct mlx4_dev *dev, int port, struct mlx4_port_cap *port_c
 		port_cap->supported_port_types = field & 3;
 		port_cap->suggested_type = (field >> 3) & 1;
 		port_cap->default_sense = (field >> 4) & 1;
+		port_cap->dmfs_optimized_state = (field >> 5) & 1;
 		MLX4_GET(field, outbox, QUERY_PORT_MTU_OFFSET);
 		port_cap->ib_mtu	   = field & 0xf;
 		MLX4_GET(field, outbox, QUERY_PORT_WIDTH_OFFSET);
@@ -1530,6 +1545,12 @@ int mlx4_INIT_HCA(struct mlx4_dev *dev, struct mlx4_init_hca_param *param)
 	struct mlx4_cmd_mailbox *mailbox;
 	__be32 *inbox;
 	int err;
+	static const u8 a0_dmfs_hw_steering[] =  {
+		[MLX4_STEERING_DMFS_A0_DEFAULT]		= 0,
+		[MLX4_STEERING_DMFS_A0_DYNAMIC]		= 1,
+		[MLX4_STEERING_DMFS_A0_STATIC]		= 2,
+		[MLX4_STEERING_DMFS_A0_DISABLE]		= 3
+	};
 
 #define INIT_HCA_IN_SIZE		 0x200
 #define INIT_HCA_VERSION_OFFSET		 0x000
@@ -1563,6 +1584,7 @@ int mlx4_INIT_HCA(struct mlx4_dev *dev, struct mlx4_init_hca_param *param)
 #define  INIT_HCA_FS_PARAM_OFFSET         0x1d0
 #define  INIT_HCA_FS_BASE_OFFSET          (INIT_HCA_FS_PARAM_OFFSET + 0x00)
 #define  INIT_HCA_FS_LOG_ENTRY_SZ_OFFSET  (INIT_HCA_FS_PARAM_OFFSET + 0x12)
+#define  INIT_HCA_FS_A0_OFFSET		  (INIT_HCA_FS_PARAM_OFFSET + 0x18)
 #define  INIT_HCA_FS_LOG_TABLE_SZ_OFFSET  (INIT_HCA_FS_PARAM_OFFSET + 0x1b)
 #define  INIT_HCA_FS_ETH_BITS_OFFSET      (INIT_HCA_FS_PARAM_OFFSET + 0x21)
 #define  INIT_HCA_FS_ETH_NUM_ADDRS_OFFSET (INIT_HCA_FS_PARAM_OFFSET + 0x22)
@@ -1673,8 +1695,11 @@ int mlx4_INIT_HCA(struct mlx4_dev *dev, struct mlx4_init_hca_param *param)
 		/* Enable Ethernet flow steering
 		 * with udp unicast and tcp unicast
 		 */
-		MLX4_PUT(inbox, (u8) (MLX4_FS_UDP_UC_EN | MLX4_FS_TCP_UC_EN),
-			 INIT_HCA_FS_ETH_BITS_OFFSET);
+		if (dev->caps.dmfs_high_steer_mode !=
+		    MLX4_STEERING_DMFS_A0_STATIC)
+			MLX4_PUT(inbox,
+				 (u8)(MLX4_FS_UDP_UC_EN | MLX4_FS_TCP_UC_EN),
+				 INIT_HCA_FS_ETH_BITS_OFFSET);
 		MLX4_PUT(inbox, (u16) MLX4_FS_NUM_OF_L2_ADDR,
 			 INIT_HCA_FS_ETH_NUM_ADDRS_OFFSET);
 		/* Enable IPoIB flow steering
@@ -1684,6 +1709,13 @@ int mlx4_INIT_HCA(struct mlx4_dev *dev, struct mlx4_init_hca_param *param)
 			 INIT_HCA_FS_IB_BITS_OFFSET);
 		MLX4_PUT(inbox, (u16) MLX4_FS_NUM_OF_L2_ADDR,
 			 INIT_HCA_FS_IB_NUM_ADDRS_OFFSET);
+
+		if (dev->caps.dmfs_high_steer_mode !=
+		    MLX4_STEERING_DMFS_A0_NOT_SUPPORTED)
+			MLX4_PUT(inbox,
+				 ((u8)(a0_dmfs_hw_steering[dev->caps.dmfs_high_steer_mode]
+				       << 6)),
+				 INIT_HCA_FS_A0_OFFSET);
 	} else {
 		MLX4_PUT(inbox, param->mc_base,	INIT_HCA_MC_BASE_OFFSET);
 		MLX4_PUT(inbox, param->log_mc_entry_sz,
@@ -1734,6 +1766,12 @@ int mlx4_QUERY_HCA(struct mlx4_dev *dev,
 	u32 dword_field;
 	int err;
 	u8 byte_field;
+	static const u8 a0_dmfs_query_hw_steering[] =  {
+		[0] = MLX4_STEERING_DMFS_A0_DEFAULT,
+		[1] = MLX4_STEERING_DMFS_A0_DYNAMIC,
+		[2] = MLX4_STEERING_DMFS_A0_STATIC,
+		[3] = MLX4_STEERING_DMFS_A0_DISABLE
+	};
 
 #define QUERY_HCA_GLOBAL_CAPS_OFFSET	0x04
 #define QUERY_HCA_CORE_CLOCK_OFFSET	0x0c
@@ -1786,6 +1824,10 @@ int mlx4_QUERY_HCA(struct mlx4_dev *dev,
 			 INIT_HCA_FS_LOG_ENTRY_SZ_OFFSET);
 		MLX4_GET(param->log_mc_table_sz, outbox,
 			 INIT_HCA_FS_LOG_TABLE_SZ_OFFSET);
+		MLX4_GET(byte_field, outbox,
+			 INIT_HCA_FS_A0_OFFSET);
+		param->dmfs_high_steer_mode =
+			a0_dmfs_query_hw_steering[(byte_field >> 6) & 3];
 	} else {
 		MLX4_GET(param->mc_base, outbox, INIT_HCA_MC_BASE_OFFSET);
 		MLX4_GET(param->log_mc_entry_sz, outbox,