summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox/mlx4/main.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-09-03 15:08:17 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2015-09-03 15:08:17 (GMT)
commitdd5cdb48edfd34401799056a9acf61078d773f90 (patch)
tree8e251fb4a4c196540fe9b6a6d8b13275f93a057c /drivers/net/ethernet/mellanox/mlx4/main.c
parent1e1a4e8f439113b7820bc7150569f685e1cc2b43 (diff)
parent62da98656b62a5ca57f22263705175af8ded5aa1 (diff)
downloadlinux-dd5cdb48edfd34401799056a9acf61078d773f90.tar.xz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Another merge window, another set of networking changes. I've heard rumblings that the lightweight tunnels infrastructure has been voted networking change of the year. But what do I know? 1) Add conntrack support to openvswitch, from Joe Stringer. 2) Initial support for VRF (Virtual Routing and Forwarding), which allows the segmentation of routing paths without using multiple devices. There are some semantic kinks to work out still, but this is a reasonably strong foundation. From David Ahern. 3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov. 4) Ignore route nexthops with a link down state in ipv6, just like ipv4. From Andy Gospodarek. 5) Remove spinlock from fast path of act_gact and act_mirred, from Eric Dumazet. 6) Document the DSA layer, from Florian Fainelli. 7) Add netconsole support to bcmgenet, systemport, and DSA. Also from Florian Fainelli. 8) Add Mellanox Switch Driver and core infrastructure, from Jiri Pirko. 9) Add support for "light weight tunnels", which allow for encapsulation and decapsulation without bearing the overhead of a full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of others. 10) Add Identifier Locator Addressing support for ipv6, from Tom Herbert. 11) Support fragmented SKBs in iwlwifi, from Johannes Berg. 12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia. 13) Add BQL support to 3c59x driver, from Loganaden Velvindron. 14) Stop using a zero TX queue length to mean that a device shouldn't have a qdisc attached, use an explicit flag instead. From Phil Sutter. 15) Use generic geneve netdevice infrastructure in openvswitch, from Pravin B Shelar. 16) Add infrastructure to avoid re-forwarding a packet in software that was already forwarded by a hardware switch. From Scott Feldman. 17) Allow AF_PACKET fanout function to be implemented in a bpf program, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits) netfilter: nf_conntrack: make nf_ct_zone_dflt built-in netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled net: fec: clear receive interrupts before processing a packet ipv6: fix exthdrs offload registration in out_rt path xen-netback: add support for multicast control bgmac: Update fixed_phy_register() sock, diag: fix panic in sock_diag_put_filterinfo flow_dissector: Use 'const' where possible. flow_dissector: Fix function argument ordering dependency ixgbe: Resolve "initialized field overwritten" warnings ixgbe: Remove bimodal SR-IOV disabling ixgbe: Add support for reporting 2.5G link speed ixgbe: fix bounds checking in ixgbe_setup_tc for 82598 ixgbe: support for ethtool set_rxfh ixgbe: Avoid needless PHY access on copper phys ixgbe: cleanup to use cached mask value ixgbe: Remove second instance of lan_id variable ixgbe: use kzalloc for allocating one thing flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c ixgbe: Remove unused PCI bus types ...
Diffstat (limited to 'drivers/net/ethernet/mellanox/mlx4/main.c')
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/main.c45
1 files changed, 38 insertions, 7 deletions
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 29c2a01..006757f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -405,6 +405,21 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
dev->caps.max_gso_sz = dev_cap->max_gso_sz;
dev->caps.max_rss_tbl_sz = dev_cap->max_rss_tbl_sz;
+ if (dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_PHV_EN) {
+ struct mlx4_init_hca_param hca_param;
+
+ memset(&hca_param, 0, sizeof(hca_param));
+ err = mlx4_QUERY_HCA(dev, &hca_param);
+ /* Turn off PHV_EN flag in case phv_check_en is set.
+ * phv_check_en is a HW check that parse the packet and verify
+ * phv bit was reported correctly in the wqe. To allow QinQ
+ * PHV_EN flag should be set and phv_check_en must be cleared
+ * otherwise QinQ packets will be drop by the HW.
+ */
+ if (err || hca_param.phv_check_en)
+ dev->caps.flags2 &= ~MLX4_DEV_CAP_FLAG2_PHV_EN;
+ }
+
/* Sense port always allowed on supported devices for ConnectX-1 and -2 */
if (mlx4_priv(dev)->pci_dev_data & MLX4_PCI_DEV_FORCE_SENSE_PORT)
dev->caps.flags |= MLX4_DEV_CAP_FLAG_SENSE_SUPPORT;
@@ -2654,9 +2669,14 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev)
if (msi_x) {
int nreq = dev->caps.num_ports * num_online_cpus() + 1;
+ bool shared_ports = false;
nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs,
nreq);
+ if (nreq > MAX_MSIX) {
+ nreq = MAX_MSIX;
+ shared_ports = true;
+ }
entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL);
if (!entries)
@@ -2679,6 +2699,9 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev)
bitmap_zero(priv->eq_table.eq[MLX4_EQ_ASYNC].actv_ports.ports,
dev->caps.num_ports);
+ if (MLX4_IS_LEGACY_EQ_MODE(dev->caps))
+ shared_ports = true;
+
for (i = 0; i < dev->caps.num_comp_vectors + 1; i++) {
if (i == MLX4_EQ_ASYNC)
continue;
@@ -2686,7 +2709,7 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev)
priv->eq_table.eq[i].irq =
entries[i + 1 - !!(i > MLX4_EQ_ASYNC)].vector;
- if (MLX4_IS_LEGACY_EQ_MODE(dev->caps)) {
+ if (shared_ports) {
bitmap_fill(priv->eq_table.eq[i].actv_ports.ports,
dev->caps.num_ports);
/* We don't set affinity hint when there
@@ -2912,6 +2935,8 @@ static u64 mlx4_enable_sriov(struct mlx4_dev *dev, struct pci_dev *pdev,
{
u64 dev_flags = dev->flags;
int err = 0;
+ int fw_enabled_sriov_vfs = min(pci_sriov_get_totalvfs(pdev),
+ MLX4_MAX_NUM_VF);
if (reset_flow) {
dev->dev_vfs = kcalloc(total_vfs, sizeof(*dev->dev_vfs),
@@ -2937,6 +2962,12 @@ static u64 mlx4_enable_sriov(struct mlx4_dev *dev, struct pci_dev *pdev,
}
if (!(dev->flags & MLX4_FLAG_SRIOV)) {
+ if (total_vfs > fw_enabled_sriov_vfs) {
+ mlx4_err(dev, "requested vfs (%d) > available vfs (%d). Continuing without SR_IOV\n",
+ total_vfs, fw_enabled_sriov_vfs);
+ err = -ENOMEM;
+ goto disable_sriov;
+ }
mlx4_warn(dev, "Enabling SR-IOV with %d VFs\n", total_vfs);
err = pci_enable_sriov(pdev, total_vfs);
}
@@ -3418,20 +3449,20 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data,
goto err_disable_pdev;
}
}
- if (total_vfs >= MLX4_MAX_NUM_VF) {
+ if (total_vfs > MLX4_MAX_NUM_VF) {
dev_err(&pdev->dev,
- "Requested more VF's (%d) than allowed (%d)\n",
- total_vfs, MLX4_MAX_NUM_VF - 1);
+ "Requested more VF's (%d) than allowed by hw (%d)\n",
+ total_vfs, MLX4_MAX_NUM_VF);
err = -EINVAL;
goto err_disable_pdev;
}
for (i = 0; i < MLX4_MAX_PORTS; i++) {
- if (nvfs[i] + nvfs[2] >= MLX4_MAX_NUM_VF_P_PORT) {
+ if (nvfs[i] + nvfs[2] > MLX4_MAX_NUM_VF_P_PORT) {
dev_err(&pdev->dev,
- "Requested more VF's (%d) for port (%d) than allowed (%d)\n",
+ "Requested more VF's (%d) for port (%d) than allowed by driver (%d)\n",
nvfs[i] + nvfs[2], i + 1,
- MLX4_MAX_NUM_VF_P_PORT - 1);
+ MLX4_MAX_NUM_VF_P_PORT);
err = -EINVAL;
goto err_disable_pdev;
}