Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

1 files changed, 227 insertions, 0 deletions

diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.h b/drivers/net/ethernet/mellanox/mlxsw/pci.h
new file mode 100644
index 0000000..1ef9664
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.h
@@ -0,0 +1,227 @@
+/*
+ * drivers/net/ethernet/mellanox/mlxsw/pci.h
+ * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MLXSW_PCI_H
+#define _MLXSW_PCI_H
+
+#include <linux/bitops.h>
+
+#include "item.h"
+
+#define PCI_DEVICE_ID_MELLANOX_SWITCHX2	0xc738
+#define MLXSW_PCI_BAR0_SIZE		(1024 * 1024) /* 1MB */
+#define MLXSW_PCI_PAGE_SIZE		4096
+
+#define MLXSW_PCI_CIR_BASE			0x71000
+#define MLXSW_PCI_CIR_IN_PARAM_HI		MLXSW_PCI_CIR_BASE
+#define MLXSW_PCI_CIR_IN_PARAM_LO		(MLXSW_PCI_CIR_BASE + 0x04)
+#define MLXSW_PCI_CIR_IN_MODIFIER		(MLXSW_PCI_CIR_BASE + 0x08)
+#define MLXSW_PCI_CIR_OUT_PARAM_HI		(MLXSW_PCI_CIR_BASE + 0x0C)
+#define MLXSW_PCI_CIR_OUT_PARAM_LO		(MLXSW_PCI_CIR_BASE + 0x10)
+#define MLXSW_PCI_CIR_TOKEN			(MLXSW_PCI_CIR_BASE + 0x14)
+#define MLXSW_PCI_CIR_CTRL			(MLXSW_PCI_CIR_BASE + 0x18)
+#define MLXSW_PCI_CIR_CTRL_GO_BIT		BIT(23)
+#define MLXSW_PCI_CIR_CTRL_EVREQ_BIT		BIT(22)
+#define MLXSW_PCI_CIR_CTRL_OPCODE_MOD_SHIFT	12
+#define MLXSW_PCI_CIR_CTRL_STATUS_SHIFT		24
+#define MLXSW_PCI_CIR_TIMEOUT_MSECS		1000
+
+#define MLXSW_PCI_SW_RESET			0xF0010
+#define MLXSW_PCI_SW_RESET_RST_BIT		BIT(0)
+#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS	5000
+
+#define MLXSW_PCI_DOORBELL_SDQ_OFFSET		0x000
+#define MLXSW_PCI_DOORBELL_RDQ_OFFSET		0x200
+#define MLXSW_PCI_DOORBELL_CQ_OFFSET		0x400
+#define MLXSW_PCI_DOORBELL_EQ_OFFSET		0x600
+#define MLXSW_PCI_DOORBELL_ARM_CQ_OFFSET	0x800
+#define MLXSW_PCI_DOORBELL_ARM_EQ_OFFSET	0xA00
+
+#define MLXSW_PCI_DOORBELL(offset, type_offset, num)	\
+	((offset) + (type_offset) + (num) * 4)
+
+#define MLXSW_PCI_RDQS_COUNT	24
+#define MLXSW_PCI_SDQS_COUNT	24
+#define MLXSW_PCI_CQS_COUNT	(MLXSW_PCI_RDQS_COUNT + MLXSW_PCI_SDQS_COUNT)
+#define MLXSW_PCI_EQS_COUNT	2
+#define MLXSW_PCI_EQ_ASYNC_NUM	0
+#define MLXSW_PCI_EQ_COMP_NUM	1
+
+#define MLXSW_PCI_AQ_PAGES	8
+#define MLXSW_PCI_AQ_SIZE	(MLXSW_PCI_PAGE_SIZE * MLXSW_PCI_AQ_PAGES)
+#define MLXSW_PCI_WQE_SIZE	32 /* 32 bytes per element */
+#define MLXSW_PCI_CQE_SIZE	16 /* 16 bytes per element */
+#define MLXSW_PCI_EQE_SIZE	16 /* 16 bytes per element */
+#define MLXSW_PCI_WQE_COUNT	(MLXSW_PCI_AQ_SIZE / MLXSW_PCI_WQE_SIZE)
+#define MLXSW_PCI_CQE_COUNT	(MLXSW_PCI_AQ_SIZE / MLXSW_PCI_CQE_SIZE)
+#define MLXSW_PCI_EQE_COUNT	(MLXSW_PCI_AQ_SIZE / MLXSW_PCI_EQE_SIZE)
+#define MLXSW_PCI_EQE_UPDATE_COUNT	0x80
+
+#define MLXSW_PCI_WQE_SG_ENTRIES	3
+#define MLXSW_PCI_WQE_TYPE_ETHERNET	0xA
+
+/* pci_wqe_c
+ * If set it indicates that a completion should be reported upon
+ * execution of this descriptor.
+ */
+MLXSW_ITEM32(pci, wqe, c, 0x00, 31, 1);
+
+/* pci_wqe_lp
+ * Local Processing, set if packet should be processed by the local
+ * switch hardware:
+ * For Ethernet EMAD (Direct Route and non Direct Route) -
+ * must be set if packet destination is local device
+ * For InfiniBand CTL - must be set if packet destination is local device
+ * Otherwise it must be clear
+ * Local Process packets must not exceed the size of 2K (including payload
+ * and headers).
+ */
+MLXSW_ITEM32(pci, wqe, lp, 0x00, 30, 1);
+
+/* pci_wqe_type
+ * Packet type.
+ */
+MLXSW_ITEM32(pci, wqe, type, 0x00, 23, 4);
+
+/* pci_wqe_byte_count
+ * Size of i-th scatter/gather entry, 0 if entry is unused.
+ */
+MLXSW_ITEM16_INDEXED(pci, wqe, byte_count, 0x02, 0, 14, 0x02, 0x00, false);
+
+/* pci_wqe_address
+ * Physical address of i-th scatter/gather entry.
+ * Gather Entries must be 2Byte aligned.
+ */
+MLXSW_ITEM64_INDEXED(pci, wqe, address, 0x08, 0, 64, 0x8, 0x0, false);
+
+/* pci_cqe_lag
+ * Packet arrives from a port which is a LAG
+ */
+MLXSW_ITEM32(pci, cqe, lag, 0x00, 23, 1);
+
+/* pci_cqe_system_port
+ * When lag=0: System port on which the packet was received
+ * When lag=1:
+ * bits [15:4] LAG ID on which the packet was received
+ * bits [3:0] sub_port on which the packet was received
+ */
+MLXSW_ITEM32(pci, cqe, system_port, 0x00, 0, 16);
+
+/* pci_cqe_wqe_counter
+ * WQE count of the WQEs completed on the associated dqn
+ */
+MLXSW_ITEM32(pci, cqe, wqe_counter, 0x04, 16, 16);
+
+/* pci_cqe_byte_count
+ * Byte count of received packets including additional two
+ * Reserved Bytes that are append to the end of the frame.
+ * Reserved for Send CQE.
+ */
+MLXSW_ITEM32(pci, cqe, byte_count, 0x04, 0, 14);
+
+/* pci_cqe_trap_id
+ * Trap ID that captured the packet.
+ */
+MLXSW_ITEM32(pci, cqe, trap_id, 0x08, 0, 8);
+
+/* pci_cqe_crc
+ * Length include CRC. Indicates the length field includes
+ * the packet's CRC.
+ */
+MLXSW_ITEM32(pci, cqe, crc, 0x0C, 8, 1);
+
+/* pci_cqe_e
+ * CQE with Error.
+ */
+MLXSW_ITEM32(pci, cqe, e, 0x0C, 7, 1);
+
+/* pci_cqe_sr
+ * 1 - Send Queue
+ * 0 - Receive Queue
+ */
+MLXSW_ITEM32(pci, cqe, sr, 0x0C, 6, 1);
+
+/* pci_cqe_dqn
+ * Descriptor Queue (DQ) Number.
+ */
+MLXSW_ITEM32(pci, cqe, dqn, 0x0C, 1, 5);
+
+/* pci_cqe_owner
+ * Ownership bit.
+ */
+MLXSW_ITEM32(pci, cqe, owner, 0x0C, 0, 1);
+
+/* pci_eqe_event_type
+ * Event type.
+ */
+MLXSW_ITEM32(pci, eqe, event_type, 0x0C, 24, 8);
+#define MLXSW_PCI_EQE_EVENT_TYPE_COMP	0x00
+#define MLXSW_PCI_EQE_EVENT_TYPE_CMD	0x0A
+
+/* pci_eqe_event_sub_type
+ * Event type.
+ */
+MLXSW_ITEM32(pci, eqe, event_sub_type, 0x0C, 16, 8);
+
+/* pci_eqe_cqn
+ * Completion Queue that triggeret this EQE.
+ */
+MLXSW_ITEM32(pci, eqe, cqn, 0x0C, 8, 7);
+
+/* pci_eqe_owner
+ * Ownership bit.
+ */
+MLXSW_ITEM32(pci, eqe, owner, 0x0C, 0, 1);
+
+/* pci_eqe_cmd_token
+ * Command completion event - token
+ */
+MLXSW_ITEM32(pci, eqe, cmd_token, 0x08, 16, 16);
+
+/* pci_eqe_cmd_status
+ * Command completion event - status
+ */
+MLXSW_ITEM32(pci, eqe, cmd_status, 0x08, 0, 8);
+
+/* pci_eqe_cmd_out_param_h
+ * Command completion event - output parameter - higher part
+ */
+MLXSW_ITEM32(pci, eqe, cmd_out_param_h, 0x0C, 0, 32);
+
+/* pci_eqe_cmd_out_param_l
+ * Command completion event - output parameter - lower part
+ */
+MLXSW_ITEM32(pci, eqe, cmd_out_param_l, 0x10, 0, 32);
+
+#endif