qed: Align TLVs

As the VF infrastructure is supposed to offer backward/forward
compatibility, the various types associated with VF<->PF communication
should be aligned across all various platforms that support IOV
on our family of adapters.

This adds a couple of currently missing values, specifically aligning
the enum for the various TLVs possible in the communication between them.

It then adds the PF implementation for some of those missing VF requests.
This support isn't really necessary for the Linux VF as those VFs aren't
requiring it [at least today], but are required by VFs running on other
OSes. LRO is an example of one such configuration.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 52 insertions, 0 deletions

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.h b/drivers/net/ethernet/qlogic/qed/qed_l2.h
index 3b65a45..f9e677a 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.h
@@ -16,6 +16,25 @@
 #include "qed_hw.h"
 #include "qed_sp.h"
 
+struct qed_sge_tpa_params {
+	u8 max_buffers_per_cqe;
+
+	u8 update_tpa_en_flg;
+	u8 tpa_ipv4_en_flg;
+	u8 tpa_ipv6_en_flg;
+	u8 tpa_ipv4_tunn_en_flg;
+	u8 tpa_ipv6_tunn_en_flg;
+
+	u8 update_tpa_param_flg;
+	u8 tpa_pkt_split_flg;
+	u8 tpa_hdr_data_split_flg;
+	u8 tpa_gro_consistent_flg;
+	u8 tpa_max_aggs_num;
+	u16 tpa_max_size;
+	u16 tpa_min_size_to_start;
+	u16 tpa_min_size_to_cont;
+};
+
 enum qed_filter_opcode {
 	QED_FILTER_ADD,
 	QED_FILTER_REMOVE,
@@ -119,12 +138,17 @@ struct qed_sp_vport_update_params {
 	u8				vport_active_rx_flg;
 	u8				update_vport_active_tx_flg;
 	u8				vport_active_tx_flg;
+	u8				update_inner_vlan_removal_flg;
+	u8				inner_vlan_removal_flg;
+	u8				update_tx_switching_flg;
+	u8				tx_switching_flg;
 	u8				update_approx_mcast_flg;
 	u8				update_accept_any_vlan_flg;
 	u8				accept_any_vlan;
 	unsigned long			bins[8];
 	struct qed_rss_params		*rss_params;
 	struct qed_filter_accept_flags	accept_flags;
+	struct qed_sge_tpa_params	*sge_tpa_params;
 };
 
 int qed_sp_vport_update(struct qed_hwfn *p_hwfn,
@@ -152,6 +176,34 @@ int qed_sp_eth_filter_ucast(struct qed_hwfn *p_hwfn,
 			    enum spq_mode comp_mode,
 			    struct qed_spq_comp_cb *p_comp_data);
 
+/**
+ * @brief qed_sp_rx_eth_queues_update -
+ *
+ * This ramrod updates an RX queue. It is used for setting the active state
+ * of the queue and updating the TPA and SGE parameters.
+ *
+ * @note At the moment - only used by non-linux VFs.
+ *
+ * @param p_hwfn
+ * @param rx_queue_id		RX Queue ID
+ * @param num_rxqs		Allow to update multiple rx
+ *				queues, from rx_queue_id to
+ *				(rx_queue_id + num_rxqs)
+ * @param complete_cqe_flg	Post completion to the CQE Ring if set
+ * @param complete_event_flg	Post completion to the Event Ring if set
+ *
+ * @return int
+ */
+
+int
+qed_sp_eth_rx_queues_update(struct qed_hwfn *p_hwfn,
+			    u16 rx_queue_id,
+			    u8 num_rxqs,
+			    u8 complete_cqe_flg,
+			    u8 complete_event_flg,
+			    enum spq_mode comp_mode,
+			    struct qed_spq_comp_cb *p_comp_data);
+
 int qed_sp_eth_vport_start(struct qed_hwfn *p_hwfn,
 			   struct qed_sp_vport_start_params *p_params);