summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/smsc/smsc911x.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-09-03 15:08:17 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2015-09-03 15:08:17 (GMT)
commitdd5cdb48edfd34401799056a9acf61078d773f90 (patch)
tree8e251fb4a4c196540fe9b6a6d8b13275f93a057c /drivers/net/ethernet/smsc/smsc911x.c
parent1e1a4e8f439113b7820bc7150569f685e1cc2b43 (diff)
parent62da98656b62a5ca57f22263705175af8ded5aa1 (diff)
downloadlinux-dd5cdb48edfd34401799056a9acf61078d773f90.tar.xz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Another merge window, another set of networking changes. I've heard rumblings that the lightweight tunnels infrastructure has been voted networking change of the year. But what do I know? 1) Add conntrack support to openvswitch, from Joe Stringer. 2) Initial support for VRF (Virtual Routing and Forwarding), which allows the segmentation of routing paths without using multiple devices. There are some semantic kinks to work out still, but this is a reasonably strong foundation. From David Ahern. 3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov. 4) Ignore route nexthops with a link down state in ipv6, just like ipv4. From Andy Gospodarek. 5) Remove spinlock from fast path of act_gact and act_mirred, from Eric Dumazet. 6) Document the DSA layer, from Florian Fainelli. 7) Add netconsole support to bcmgenet, systemport, and DSA. Also from Florian Fainelli. 8) Add Mellanox Switch Driver and core infrastructure, from Jiri Pirko. 9) Add support for "light weight tunnels", which allow for encapsulation and decapsulation without bearing the overhead of a full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of others. 10) Add Identifier Locator Addressing support for ipv6, from Tom Herbert. 11) Support fragmented SKBs in iwlwifi, from Johannes Berg. 12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia. 13) Add BQL support to 3c59x driver, from Loganaden Velvindron. 14) Stop using a zero TX queue length to mean that a device shouldn't have a qdisc attached, use an explicit flag instead. From Phil Sutter. 15) Use generic geneve netdevice infrastructure in openvswitch, from Pravin B Shelar. 16) Add infrastructure to avoid re-forwarding a packet in software that was already forwarded by a hardware switch. From Scott Feldman. 17) Allow AF_PACKET fanout function to be implemented in a bpf program, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits) netfilter: nf_conntrack: make nf_ct_zone_dflt built-in netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled net: fec: clear receive interrupts before processing a packet ipv6: fix exthdrs offload registration in out_rt path xen-netback: add support for multicast control bgmac: Update fixed_phy_register() sock, diag: fix panic in sock_diag_put_filterinfo flow_dissector: Use 'const' where possible. flow_dissector: Fix function argument ordering dependency ixgbe: Resolve "initialized field overwritten" warnings ixgbe: Remove bimodal SR-IOV disabling ixgbe: Add support for reporting 2.5G link speed ixgbe: fix bounds checking in ixgbe_setup_tc for 82598 ixgbe: support for ethtool set_rxfh ixgbe: Avoid needless PHY access on copper phys ixgbe: cleanup to use cached mask value ixgbe: Remove second instance of lan_id variable ixgbe: use kzalloc for allocating one thing flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c ixgbe: Remove unused PCI bus types ...
Diffstat (limited to 'drivers/net/ethernet/smsc/smsc911x.c')
-rw-r--r--drivers/net/ethernet/smsc/smsc911x.c65
1 files changed, 34 insertions, 31 deletions
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 959aeea..3b4cd8a 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -59,7 +59,9 @@
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/of_net.h>
+#include <linux/acpi.h>
#include <linux/pm_runtime.h>
+#include <linux/property.h>
#include "smsc911x.h"
@@ -2362,59 +2364,50 @@ static const struct smsc911x_ops shifted_smsc911x_ops = {
.tx_writefifo = smsc911x_tx_writefifo_shift,
};
-#ifdef CONFIG_OF
-static int smsc911x_probe_config_dt(struct smsc911x_platform_config *config,
- struct device_node *np)
+static int smsc911x_probe_config(struct smsc911x_platform_config *config,
+ struct device *dev)
{
- const char *mac;
+ int phy_interface;
u32 width = 0;
+ int err;
- if (!np)
- return -ENODEV;
-
- config->phy_interface = of_get_phy_mode(np);
+ phy_interface = device_get_phy_mode(dev);
+ if (phy_interface < 0)
+ phy_interface = PHY_INTERFACE_MODE_NA;
+ config->phy_interface = phy_interface;
- mac = of_get_mac_address(np);
- if (mac)
- memcpy(config->mac, mac, ETH_ALEN);
+ device_get_mac_address(dev, config->mac, ETH_ALEN);
- of_property_read_u32(np, "reg-shift", &config->shift);
-
- of_property_read_u32(np, "reg-io-width", &width);
- if (width == 4)
+ err = device_property_read_u32(dev, "reg-io-width", &width);
+ if (err == -ENXIO)
+ return err;
+ if (!err && width == 4)
config->flags |= SMSC911X_USE_32BIT;
else
config->flags |= SMSC911X_USE_16BIT;
- if (of_get_property(np, "smsc,irq-active-high", NULL))
+ device_property_read_u32(dev, "reg-shift", &config->shift);
+
+ if (device_property_present(dev, "smsc,irq-active-high"))
config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
- if (of_get_property(np, "smsc,irq-push-pull", NULL))
+ if (device_property_present(dev, "smsc,irq-push-pull"))
config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL;
- if (of_get_property(np, "smsc,force-internal-phy", NULL))
+ if (device_property_present(dev, "smsc,force-internal-phy"))
config->flags |= SMSC911X_FORCE_INTERNAL_PHY;
- if (of_get_property(np, "smsc,force-external-phy", NULL))
+ if (device_property_present(dev, "smsc,force-external-phy"))
config->flags |= SMSC911X_FORCE_EXTERNAL_PHY;
- if (of_get_property(np, "smsc,save-mac-address", NULL))
+ if (device_property_present(dev, "smsc,save-mac-address"))
config->flags |= SMSC911X_SAVE_MAC_ADDRESS;
return 0;
}
-#else
-static inline int smsc911x_probe_config_dt(
- struct smsc911x_platform_config *config,
- struct device_node *np)
-{
- return -ENODEV;
-}
-#endif /* CONFIG_OF */
static int smsc911x_drv_probe(struct platform_device *pdev)
{
- struct device_node *np = pdev->dev.of_node;
struct net_device *dev;
struct smsc911x_data *pdata;
struct smsc911x_platform_config *config = dev_get_platdata(&pdev->dev);
@@ -2435,7 +2428,10 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
res_size = resource_size(res);
irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
+ if (irq == -EPROBE_DEFER) {
+ retval = -EPROBE_DEFER;
+ goto out_0;
+ } else if (irq <= 0) {
pr_warn("Could not allocate irq resource\n");
retval = -ENODEV;
goto out_0;
@@ -2478,7 +2474,7 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
goto out_disable_resources;
}
- retval = smsc911x_probe_config_dt(&pdata->config, np);
+ retval = smsc911x_probe_config(&pdata->config, &pdev->dev);
if (retval && config) {
/* copy config parameters across to pdata */
memcpy(&pdata->config, config, sizeof(pdata->config));
@@ -2654,6 +2650,12 @@ static const struct of_device_id smsc911x_dt_ids[] = {
MODULE_DEVICE_TABLE(of, smsc911x_dt_ids);
#endif
+static const struct acpi_device_id smsc911x_acpi_match[] = {
+ { "ARMH9118", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, smsc911x_acpi_match);
+
static struct platform_driver smsc911x_driver = {
.probe = smsc911x_drv_probe,
.remove = smsc911x_drv_remove,
@@ -2661,6 +2663,7 @@ static struct platform_driver smsc911x_driver = {
.name = SMSC_CHIPNAME,
.pm = SMSC911X_PM_OPS,
.of_match_table = of_match_ptr(smsc911x_dt_ids),
+ .acpi_match_table = ACPI_PTR(smsc911x_acpi_match),
},
};