diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/ewrk3.c | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/ewrk3.c')
-rw-r--r-- | drivers/net/ewrk3.c | 2007 |
1 files changed, 2007 insertions, 0 deletions
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c new file mode 100644 index 0000000..dcf969b --- /dev/null +++ b/drivers/net/ewrk3.c @@ -0,0 +1,2007 @@ +/* ewrk3.c: A DIGITAL EtherWORKS 3 ethernet driver for Linux. + + Written 1994 by David C. Davies. + + Copyright 1994 Digital Equipment Corporation. + + This software may be used and distributed according to the terms of + the GNU General Public License, incorporated herein by reference. + + This driver is written for the Digital Equipment Corporation series + of EtherWORKS ethernet cards: + + DE203 Turbo (BNC) + DE204 Turbo (TP) + DE205 Turbo (TP BNC) + + The driver has been tested on a relatively busy network using the DE205 + card and benchmarked with 'ttcp': it transferred 16M of data at 975kB/s + (7.8Mb/s) to a DECstation 5000/200. + + The author may be reached at davies@maniac.ultranet.com. + + ========================================================================= + This driver has been written substantially from scratch, although its + inheritance of style and stack interface from 'depca.c' and in turn from + Donald Becker's 'lance.c' should be obvious. + + The DE203/4/5 boards all use a new proprietary chip in place of the + LANCE chip used in prior cards (DEPCA, DE100, DE200/1/2, DE210, DE422). + Use the depca.c driver in the standard distribution for the LANCE based + cards from DIGITAL; this driver will not work with them. + + The DE203/4/5 cards have 2 main modes: shared memory and I/O only. I/O + only makes all the card accesses through I/O transactions and no high + (shared) memory is used. This mode provides a >48% performance penalty + and is deprecated in this driver, although allowed to provide initial + setup when hardstrapped. + + The shared memory mode comes in 3 flavours: 2kB, 32kB and 64kB. There is + no point in using any mode other than the 2kB mode - their performances + are virtually identical, although the driver has been tested in the 2kB + and 32kB modes. I would suggest you uncomment the line: + + FORCE_2K_MODE; + + to allow the driver to configure the card as a 2kB card at your current + base address, thus leaving more room to clutter your system box with + other memory hungry boards. + + As many ISA and EISA cards can be supported under this driver as you + wish, limited primarily by the available IRQ lines, rather than by the + available I/O addresses (24 ISA, 16 EISA). I have checked different + configurations of multiple depca cards and ewrk3 cards and have not + found a problem yet (provided you have at least depca.c v0.38) ... + + The board IRQ setting must be at an unused IRQ which is auto-probed + using Donald Becker's autoprobe routines. All these cards are at + {5,10,11,15}. + + No 16MB memory limitation should exist with this driver as DMA is not + used and the common memory area is in low memory on the network card (my + current system has 20MB and I've not had problems yet). + + The ability to load this driver as a loadable module has been included + and used extensively during the driver development (to save those long + reboot sequences). To utilise this ability, you have to do 8 things: + + 0) have a copy of the loadable modules code installed on your system. + 1) copy ewrk3.c from the /linux/drivers/net directory to your favourite + temporary directory. + 2) edit the source code near line 1898 to reflect the I/O address and + IRQ you're using. + 3) compile ewrk3.c, but include -DMODULE in the command line to ensure + that the correct bits are compiled (see end of source code). + 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a + kernel with the ewrk3 configuration turned off and reboot. + 5) insmod ewrk3.o + [Alan Cox: Changed this so you can insmod ewrk3.o irq=x io=y] + [Adam Kropelin: now accepts irq=x1,x2 io=y1,y2 for multiple cards] + 6) run the net startup bits for your new eth?? interface manually + (usually /etc/rc.inet[12] at boot time). + 7) enjoy! + + Note that autoprobing is not allowed in loadable modules - the system is + already up and running and you're messing with interrupts. + + To unload a module, turn off the associated interface + 'ifconfig eth?? down' then 'rmmod ewrk3'. + + Promiscuous mode has been turned off in this driver, but all the + multicast address bits have been turned on. This improved the send + performance on a busy network by about 13%. + + Ioctl's have now been provided (primarily because I wanted to grab some + packet size statistics). They are patterned after 'plipconfig.c' from a + suggestion by Alan Cox. Using these ioctls, you can enable promiscuous + mode, add/delete multicast addresses, change the hardware address, get + packet size distribution statistics and muck around with the control and + status register. I'll add others if and when the need arises. + + TO DO: + ------ + + + Revision History + ---------------- + + Version Date Description + + 0.1 26-aug-94 Initial writing. ALPHA code release. + 0.11 31-aug-94 Fixed: 2k mode memory base calc., + LeMAC version calc., + IRQ vector assignments during autoprobe. + 0.12 31-aug-94 Tested working on LeMAC2 (DE20[345]-AC) card. + Fixed up MCA hash table algorithm. + 0.20 4-sep-94 Added IOCTL functionality. + 0.21 14-sep-94 Added I/O mode. + 0.21axp 15-sep-94 Special version for ALPHA AXP Linux V1.0. + 0.22 16-sep-94 Added more IOCTLs & tidied up. + 0.23 21-sep-94 Added transmit cut through. + 0.24 31-oct-94 Added uid checks in some ioctls. + 0.30 1-nov-94 BETA code release. + 0.31 5-dec-94 Added check/allocate region code. + 0.32 16-jan-95 Broadcast packet fix. + 0.33 10-Feb-95 Fix recognition bug reported by <bkm@star.rl.ac.uk>. + 0.40 27-Dec-95 Rationalise MODULE and autoprobe code. + Rewrite for portability & updated. + ALPHA support from <jestabro@amt.tay1.dec.com> + Added verify_area() calls in ewrk3_ioctl() from + suggestion by <heiko@colossus.escape.de>. + Add new multicasting code. + 0.41 20-Jan-96 Fix IRQ set up problem reported by + <kenneth@bbs.sas.ntu.ac.sg>. + 0.42 22-Apr-96 Fix alloc_device() bug <jari@markkus2.fimr.fi> + 0.43 16-Aug-96 Update alloc_device() to conform to de4x5.c + 0.44 08-Nov-01 use library crc32 functions <Matt_Domsch@dell.com> + 0.45 19-Jul-02 fix unaligned access on alpha <martin@bruli.net> + 0.46 10-Oct-02 Multiple NIC support when module <akropel1@rochester.rr.com> + 0.47 18-Oct-02 ethtool support <akropel1@rochester.rr.com> + 0.48 18-Oct-02 cli/sti removal for 2.5 <vda@port.imtp.ilyichevsk.odessa.ua> + ioctl locking, signature search cleanup <akropel1@rochester.rr.com> + + ========================================================================= + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/crc32.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/ethtool.h> +#include <linux/time.h> +#include <linux/types.h> +#include <linux/unistd.h> +#include <linux/ctype.h> +#include <linux/bitops.h> + +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/uaccess.h> + +#include "ewrk3.h" + +#define DRV_NAME "ewrk3" +#define DRV_VERSION "0.48" + +static char version[] __initdata = +DRV_NAME ":v" DRV_VERSION " 2002/10/18 davies@maniac.ultranet.com\n"; + +#ifdef EWRK3_DEBUG +static int ewrk3_debug = EWRK3_DEBUG; +#else +static int ewrk3_debug = 1; +#endif + +#define EWRK3_NDA 0xffe0 /* No Device Address */ + +#define PROBE_LENGTH 32 +#define ETH_PROM_SIG 0xAA5500FFUL + +#ifndef EWRK3_SIGNATURE +#define EWRK3_SIGNATURE {"DE203","DE204","DE205",""} +#define EWRK3_STRLEN 8 +#endif + +#ifndef EWRK3_RAM_BASE_ADDRESSES +#define EWRK3_RAM_BASE_ADDRESSES {0xc0000,0xd0000,0x00000} +#endif + +/* + ** Sets up the I/O area for the autoprobe. + */ +#define EWRK3_IO_BASE 0x100 /* Start address for probe search */ +#define EWRK3_IOP_INC 0x20 /* I/O address increment */ +#define EWRK3_TOTAL_SIZE 0x20 /* required I/O address length */ + +#ifndef MAX_NUM_EWRK3S +#define MAX_NUM_EWRK3S 21 +#endif + +#ifndef EWRK3_EISA_IO_PORTS +#define EWRK3_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */ +#endif + +#ifndef MAX_EISA_SLOTS +#define MAX_EISA_SLOTS 16 +#define EISA_SLOT_INC 0x1000 +#endif + +#define QUEUE_PKT_TIMEOUT (1*HZ) /* Jiffies */ + +/* + ** EtherWORKS 3 shared memory window sizes + */ +#define IO_ONLY 0x00 +#define SHMEM_2K 0x800 +#define SHMEM_32K 0x8000 +#define SHMEM_64K 0x10000 + +/* + ** EtherWORKS 3 IRQ ENABLE/DISABLE + */ +#define ENABLE_IRQs { \ + icr |= lp->irq_mask;\ + outb(icr, EWRK3_ICR); /* Enable the IRQs */\ +} + +#define DISABLE_IRQs { \ + icr = inb(EWRK3_ICR);\ + icr &= ~lp->irq_mask;\ + outb(icr, EWRK3_ICR); /* Disable the IRQs */\ +} + +/* + ** EtherWORKS 3 START/STOP + */ +#define START_EWRK3 { \ + csr = inb(EWRK3_CSR);\ + csr &= ~(CSR_TXD|CSR_RXD);\ + outb(csr, EWRK3_CSR); /* Enable the TX and/or RX */\ +} + +#define STOP_EWRK3 { \ + csr = (CSR_TXD|CSR_RXD);\ + outb(csr, EWRK3_CSR); /* Disable the TX and/or RX */\ +} + +/* + ** The EtherWORKS 3 private structure + */ +#define EWRK3_PKT_STAT_SZ 16 +#define EWRK3_PKT_BIN_SZ 128 /* Should be >=100 unless you + increase EWRK3_PKT_STAT_SZ */ + +struct ewrk3_stats { + u32 bins[EWRK3_PKT_STAT_SZ]; + u32 unicast; + u32 multicast; + u32 broadcast; + u32 excessive_collisions; + u32 tx_underruns; + u32 excessive_underruns; +}; + +struct ewrk3_private { + char adapter_name[80]; /* Name exported to /proc/ioports */ + u_long shmem_base; /* Shared memory start address */ + void __iomem *shmem; + u_long shmem_length; /* Shared memory window length */ + struct net_device_stats stats; /* Public stats */ + struct ewrk3_stats pktStats; /* Private stats counters */ + u_char irq_mask; /* Adapter IRQ mask bits */ + u_char mPage; /* Maximum 2kB Page number */ + u_char lemac; /* Chip rev. level */ + u_char hard_strapped; /* Don't allow a full open */ + u_char txc; /* Transmit cut through */ + void __iomem *mctbl; /* Pointer to the multicast table */ + u_char led_mask; /* Used to reserve LED access for ethtool */ + spinlock_t hw_lock; +}; + +/* + ** Force the EtherWORKS 3 card to be in 2kB MODE + */ +#define FORCE_2K_MODE { \ + shmem_length = SHMEM_2K;\ + outb(((mem_start - 0x80000) >> 11), EWRK3_MBR);\ +} + +/* + ** Public Functions + */ +static int ewrk3_open(struct net_device *dev); +static int ewrk3_queue_pkt(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t ewrk3_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static int ewrk3_close(struct net_device *dev); +static struct net_device_stats *ewrk3_get_stats(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); +static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static struct ethtool_ops ethtool_ops_203; +static struct ethtool_ops ethtool_ops; + +/* + ** Private functions + */ +static int ewrk3_hw_init(struct net_device *dev, u_long iobase); +static void ewrk3_init(struct net_device *dev); +static int ewrk3_rx(struct net_device *dev); +static int ewrk3_tx(struct net_device *dev); +static void ewrk3_timeout(struct net_device *dev); + +static void EthwrkSignature(char *name, char *eeprom_image); +static int DevicePresent(u_long iobase); +static void SetMulticastFilter(struct net_device *dev); +static int EISA_signature(char *name, s32 eisa_id); + +static int Read_EEPROM(u_long iobase, u_char eaddr); +static int Write_EEPROM(short data, u_long iobase, u_char eaddr); +static u_char get_hw_addr(struct net_device *dev, u_char * eeprom_image, char chipType); + +static int ewrk3_probe1(struct net_device *dev, u_long iobase, int irq); +static int isa_probe(struct net_device *dev, u_long iobase); +static int eisa_probe(struct net_device *dev, u_long iobase); + +static u_char irq[MAX_NUM_EWRK3S+1] = {5, 0, 10, 3, 11, 9, 15, 12}; + +static char name[EWRK3_STRLEN + 1]; +static int num_ewrks3s; + +/* + ** Miscellaneous defines... + */ +#define INIT_EWRK3 {\ + outb(EEPROM_INIT, EWRK3_IOPR);\ + mdelay(1);\ +} + +#ifndef MODULE +struct net_device * __init ewrk3_probe(int unit) +{ + struct net_device *dev = alloc_etherdev(sizeof(struct ewrk3_private)); + int err; + + if (!dev) + return ERR_PTR(-ENOMEM); + + if (unit >= 0) { + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + } + SET_MODULE_OWNER(dev); + + err = ewrk3_probe1(dev, dev->base_addr, dev->irq); + if (err) + goto out; + return dev; +out: + free_netdev(dev); + return ERR_PTR(err); + +} +#endif + +static int __init ewrk3_probe1(struct net_device *dev, u_long iobase, int irq) +{ + int err; + + dev->base_addr = iobase; + dev->irq = irq; + + /* Address PROM pattern */ + err = isa_probe(dev, iobase); + if (err != 0) + err = eisa_probe(dev, iobase); + + if (err) + return err; + + err = register_netdev(dev); + if (err) + release_region(dev->base_addr, EWRK3_TOTAL_SIZE); + + return err; +} + +static int __init +ewrk3_hw_init(struct net_device *dev, u_long iobase) +{ + struct ewrk3_private *lp; + int i, status = 0; + u_long mem_start, shmem_length; + u_char cr, cmr, icr, nicsr, lemac, hard_strapped = 0; + u_char eeprom_image[EEPROM_MAX], chksum, eisa_cr = 0; + + /* + ** Stop the EWRK3. Enable the DBR ROM. Disable interrupts and remote boot. + ** This also disables the EISA_ENABLE bit in the EISA Control Register. + */ + if (iobase > 0x400) + eisa_cr = inb(EISA_CR); + INIT_EWRK3; + + nicsr = inb(EWRK3_CSR); + + icr = inb(EWRK3_ICR); + icr &= 0x70; + outb(icr, EWRK3_ICR); /* Disable all the IRQs */ + + if (nicsr == (CSR_TXD | CSR_RXD)) + return -ENXIO; + + + /* Check that the EEPROM is alive and well and not living on Pluto... */ + for (chksum = 0, i = 0; i < EEPROM_MAX; i += 2) { + union { + short val; + char c[2]; + } tmp; + + tmp.val = (short) Read_EEPROM(iobase, (i >> 1)); + eeprom_image[i] = tmp.c[0]; + eeprom_image[i + 1] = tmp.c[1]; + chksum += eeprom_image[i] + eeprom_image[i + 1]; + } + + if (chksum != 0) { /* Bad EEPROM Data! */ + printk("%s: Device has a bad on-board EEPROM.\n", dev->name); + return -ENXIO; + } + + EthwrkSignature(name, eeprom_image); + if (*name == '\0') + return -ENXIO; + + dev->base_addr = iobase; + + if (iobase > 0x400) { + outb(eisa_cr, EISA_CR); /* Rewrite the EISA CR */ + } + lemac = eeprom_image[EEPROM_CHIPVER]; + cmr = inb(EWRK3_CMR); + + if (((lemac == LeMAC) && ((cmr & CMR_NO_EEPROM) != CMR_NO_EEPROM)) || + ((lemac == LeMAC2) && !(cmr & CMR_HS))) { + printk("%s: %s at %#4lx", dev->name, name, iobase); + hard_strapped = 1; + } else if ((iobase & 0x0fff) == EWRK3_EISA_IO_PORTS) { + /* EISA slot address */ + printk("%s: %s at %#4lx (EISA slot %ld)", + dev->name, name, iobase, ((iobase >> 12) & 0x0f)); + } else { /* ISA port address */ + printk("%s: %s at %#4lx", dev->name, name, iobase); + } + + printk(", h/w address "); + if (lemac != LeMAC2) + DevicePresent(iobase); /* need after EWRK3_INIT */ + status = get_hw_addr(dev, eeprom_image, lemac); + for (i = 0; i < ETH_ALEN - 1; i++) { /* get the ethernet addr. */ + printk("%2.2x:", dev->dev_addr[i]); + } + printk("%2.2x,\n", dev->dev_addr[i]); + + if (status) { + printk(" which has an EEPROM CRC error.\n"); + return -ENXIO; + } + + if (lemac == LeMAC2) { /* Special LeMAC2 CMR things */ + cmr &= ~(CMR_RA | CMR_WB | CMR_LINK | CMR_POLARITY | CMR_0WS); + if (eeprom_image[EEPROM_MISC0] & READ_AHEAD) + cmr |= CMR_RA; + if (eeprom_image[EEPROM_MISC0] & WRITE_BEHIND) + cmr |= CMR_WB; + if (eeprom_image[EEPROM_NETMAN0] & NETMAN_POL) + cmr |= CMR_POLARITY; + if (eeprom_image[EEPROM_NETMAN0] & NETMAN_LINK) + cmr |= CMR_LINK; + if (eeprom_image[EEPROM_MISC0] & _0WS_ENA) + cmr |= CMR_0WS; + } + if (eeprom_image[EEPROM_SETUP] & SETUP_DRAM) + cmr |= CMR_DRAM; + outb(cmr, EWRK3_CMR); + + cr = inb(EWRK3_CR); /* Set up the Control Register */ + cr |= eeprom_image[EEPROM_SETUP] & SETUP_APD; + if (cr & SETUP_APD) + cr |= eeprom_image[EEPROM_SETUP] & SETUP_PS; + cr |= eeprom_image[EEPROM_MISC0] & FAST_BUS; + cr |= eeprom_image[EEPROM_MISC0] & ENA_16; + outb(cr, EWRK3_CR); + + /* + ** Determine the base address and window length for the EWRK3 + ** RAM from the memory base register. + */ + mem_start = inb(EWRK3_MBR); + shmem_length = 0; + if (mem_start != 0) { + if ((mem_start >= 0x0a) && (mem_start <= 0x0f)) { + mem_start *= SHMEM_64K; + shmem_length = SHMEM_64K; + } else if ((mem_start >= 0x14) && (mem_start <= 0x1f)) { + mem_start *= SHMEM_32K; + shmem_length = SHMEM_32K; + } else if ((mem_start >= 0x40) && (mem_start <= 0xff)) { + mem_start = mem_start * SHMEM_2K + 0x80000; + shmem_length = SHMEM_2K; + } else { + return -ENXIO; + } + } + /* + ** See the top of this source code for comments about + ** uncommenting this line. + */ +/* FORCE_2K_MODE; */ + + if (hard_strapped) { + printk(" is hard strapped.\n"); + } else if (mem_start) { + printk(" has a %dk RAM window", (int) (shmem_length >> 10)); + printk(" at 0x%.5lx", mem_start); + } else { + printk(" is in I/O only mode"); + } + + lp = netdev_priv(dev); + lp->shmem_base = mem_start; + lp->shmem = ioremap(mem_start, shmem_length); + if (!lp->shmem) + return -ENOMEM; + lp->shmem_length = shmem_length; + lp->lemac = lemac; + lp->hard_strapped = hard_strapped; + lp->led_mask = CR_LED; + spin_lock_init(&lp->hw_lock); + + lp->mPage = 64; + if (cmr & CMR_DRAM) + lp->mPage <<= 1; /* 2 DRAMS on module */ + + sprintf(lp->adapter_name, "%s (%s)", name, dev->name); + + lp->irq_mask = ICR_TNEM | ICR_TXDM | ICR_RNEM | ICR_RXDM; + + if (!hard_strapped) { + /* + ** Enable EWRK3 board interrupts for autoprobing + */ + icr |= ICR_IE; /* Enable interrupts */ + outb(icr, EWRK3_ICR); + + /* The DMA channel may be passed in on this parameter. */ + dev->dma = 0; + + /* To auto-IRQ we enable the initialization-done and DMA err, + interrupts. For now we will always get a DMA error. */ + if (dev->irq < 2) { +#ifndef MODULE + u_char irqnum; + unsigned long irq_mask; + + + irq_mask = probe_irq_on(); + + /* + ** Trigger a TNE interrupt. + */ + icr |= ICR_TNEM; + outb(1, EWRK3_TDQ); /* Write to the TX done queue */ + outb(icr, EWRK3_ICR); /* Unmask the TXD interrupt */ + + irqnum = irq[((icr & IRQ_SEL) >> 4)]; + + mdelay(20); + dev->irq = probe_irq_off(irq_mask); + if ((dev->irq) && (irqnum == dev->irq)) { + printk(" and uses IRQ%d.\n", dev->irq); + } else { + if (!dev->irq) { + printk(" and failed to detect IRQ line.\n"); + } else if ((irqnum == 1) && (lemac == LeMAC2)) { + printk(" and an illegal IRQ line detected.\n"); + } else { + printk(", but incorrect IRQ line detected.\n"); + } + iounmap(lp->shmem); + return -ENXIO; + } + + DISABLE_IRQs; /* Mask all interrupts */ + +#endif /* MODULE */ + } else { + printk(" and requires IRQ%d.\n", dev->irq); + } + } + + if (ewrk3_debug > 1) { + printk(version); + } + /* The EWRK3-specific entries in the device structure. */ + dev->open = ewrk3_open; + dev->hard_start_xmit = ewrk3_queue_pkt; + dev->stop = ewrk3_close; + dev->get_stats = ewrk3_get_stats; + dev->set_multicast_list = set_multicast_list; + dev->do_ioctl = ewrk3_ioctl; + if (lp->adapter_name[4] == '3') + SET_ETHTOOL_OPS(dev, ðtool_ops_203); + else + SET_ETHTOOL_OPS(dev, ðtool_ops); + dev->tx_timeout = ewrk3_timeout; + dev->watchdog_timeo = QUEUE_PKT_TIMEOUT; + + dev->mem_start = 0; + + return 0; +} + + +static int ewrk3_open(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int i, status = 0; + u_char icr, csr; + + /* + ** Stop the TX and RX... + */ + STOP_EWRK3; + + if (!lp->hard_strapped) { + if (request_irq(dev->irq, (void *) ewrk3_interrupt, 0, "ewrk3", dev)) { + printk("ewrk3_open(): Requested IRQ%d is busy\n", dev->irq); + status = -EAGAIN; + } else { + + /* + ** Re-initialize the EWRK3... + */ + ewrk3_init(dev); + + if (ewrk3_debug > 1) { + printk("%s: ewrk3 open with irq %d\n", dev->name, dev->irq); + printk(" physical address: "); + for (i = 0; i < 5; i++) { + printk("%2.2x:", (u_char) dev->dev_addr[i]); + } + printk("%2.2x\n", (u_char) dev->dev_addr[i]); + if (lp->shmem_length == 0) { + printk(" no shared memory, I/O only mode\n"); + } else { + printk(" start of shared memory: 0x%08lx\n", lp->shmem_base); + printk(" window length: 0x%04lx\n", lp->shmem_length); + } + printk(" # of DRAMS: %d\n", ((inb(EWRK3_CMR) & 0x02) ? 2 : 1)); + printk(" csr: 0x%02x\n", inb(EWRK3_CSR)); + printk(" cr: 0x%02x\n", inb(EWRK3_CR)); + printk(" icr: 0x%02x\n", inb(EWRK3_ICR)); + printk(" cmr: 0x%02x\n", inb(EWRK3_CMR)); + printk(" fmqc: 0x%02x\n", inb(EWRK3_FMQC)); + } + netif_start_queue(dev); + /* + ** Unmask EWRK3 board interrupts + */ + icr = inb(EWRK3_ICR); + ENABLE_IRQs; + + } + } else { + printk(KERN_ERR "%s: ewrk3 available for hard strapped set up only.\n", dev->name); + printk(KERN_ERR " Run the 'ewrk3setup' utility or remove the hard straps.\n"); + return -EINVAL; + } + + return status; +} + +/* + ** Initialize the EtherWORKS 3 operating conditions + */ +static void ewrk3_init(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_char csr, page; + u_long iobase = dev->base_addr; + int i; + + /* + ** Enable any multicasts + */ + set_multicast_list(dev); + + /* + ** Set hardware MAC address. Address is initialized from the EEPROM + ** during startup but may have since been changed by the user. + */ + for (i=0; i<ETH_ALEN; i++) + outb(dev->dev_addr[i], EWRK3_PAR0 + i); + + /* + ** Clean out any remaining entries in all the queues here + */ + while (inb(EWRK3_TQ)); + while (inb(EWRK3_TDQ)); + while (inb(EWRK3_RQ)); + while (inb(EWRK3_FMQ)); + + /* + ** Write a clean free memory queue + */ + for (page = 1; page < lp->mPage; page++) { /* Write the free page numbers */ + outb(page, EWRK3_FMQ); /* to the Free Memory Queue */ + } + + START_EWRK3; /* Enable the TX and/or RX */ +} + +/* + * Transmit timeout + */ + +static void ewrk3_timeout(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_char icr, csr; + u_long iobase = dev->base_addr; + + if (!lp->hard_strapped) + { + printk(KERN_WARNING"%s: transmit timed/locked out, status %04x, resetting.\n", + dev->name, inb(EWRK3_CSR)); + + /* + ** Mask all board interrupts + */ + DISABLE_IRQs; + + /* + ** Stop the TX and RX... + */ + STOP_EWRK3; + + ewrk3_init(dev); + + /* + ** Unmask EWRK3 board interrupts + */ + ENABLE_IRQs; + + dev->trans_start = jiffies; + netif_wake_queue(dev); + } +} + +/* + ** Writes a socket buffer to the free page queue + */ +static int ewrk3_queue_pkt (struct sk_buff *skb, struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + void __iomem *buf = NULL; + u_char icr; + u_char page; + + spin_lock_irq (&lp->hw_lock); + DISABLE_IRQs; + + /* if no resources available, exit, request packet be queued */ + if (inb (EWRK3_FMQC) == 0) { + printk (KERN_WARNING "%s: ewrk3_queue_pkt(): No free resources...\n", + dev->name); + printk (KERN_WARNING "%s: ewrk3_queue_pkt(): CSR: %02x ICR: %02x FMQC: %02x\n", + dev->name, inb (EWRK3_CSR), inb (EWRK3_ICR), + inb (EWRK3_FMQC)); + goto err_out; + } + + /* + ** Get a free page from the FMQ + */ + if ((page = inb (EWRK3_FMQ)) >= lp->mPage) { + printk ("ewrk3_queue_pkt(): Invalid free memory page (%d).\n", + (u_char) page); + goto err_out; + } + + + /* + ** Set up shared memory window and pointer into the window + */ + if (lp->shmem_length == IO_ONLY) { + outb (page, EWRK3_IOPR); + } else if (lp->shmem_length == SHMEM_2K) { + buf = lp->shmem; + outb (page, EWRK3_MPR); + } else if (lp->shmem_length == SHMEM_32K) { + buf = (((short) page << 11) & 0x7800) + lp->shmem; + outb ((page >> 4), EWRK3_MPR); + } else if (lp->shmem_length == SHMEM_64K) { + buf = (((short) page << 11) & 0xf800) + lp->shmem; + outb ((page >> 5), EWRK3_MPR); + } else { + printk (KERN_ERR "%s: Oops - your private data area is hosed!\n", + dev->name); + BUG (); + } + + /* + ** Set up the buffer control structures and copy the data from + ** the socket buffer to the shared memory . + */ + if (lp->shmem_length == IO_ONLY) { + int i; + u_char *p = skb->data; + outb ((char) (TCR_QMODE | TCR_PAD | TCR_IFC), EWRK3_DATA); + outb ((char) (skb->len & 0xff), EWRK3_DATA); + outb ((char) ((skb->len >> 8) & 0xff), EWRK3_DATA); + outb ((char) 0x04, EWRK3_DATA); + for (i = 0; i < skb->len; i++) { + outb (*p++, EWRK3_DATA); + } + outb (page, EWRK3_TQ); /* Start sending pkt */ + } else { + writeb ((char) (TCR_QMODE | TCR_PAD | TCR_IFC), buf); /* ctrl byte */ + buf += 1; + writeb ((char) (skb->len & 0xff), buf); /* length (16 bit xfer) */ + buf += 1; + if (lp->txc) { + writeb(((skb->len >> 8) & 0xff) | XCT, buf); + buf += 1; + writeb (0x04, buf); /* index byte */ + buf += 1; + writeb (0x00, (buf + skb->len)); /* Write the XCT flag */ + memcpy_toio (buf, skb->data, PRELOAD); /* Write PRELOAD bytes */ + outb (page, EWRK3_TQ); /* Start sending pkt */ + memcpy_toio (buf + PRELOAD, + skb->data + PRELOAD, + skb->len - PRELOAD); + writeb (0xff, (buf + skb->len)); /* Write the XCT flag */ + } else { + writeb ((skb->len >> 8) & 0xff, buf); + buf += 1; + writeb (0x04, buf); /* index byte */ + buf += 1; + memcpy_toio (buf, skb->data, skb->len); /* Write data bytes */ + outb (page, EWRK3_TQ); /* Start sending pkt */ + } + } + + ENABLE_IRQs; + spin_unlock_irq (&lp->hw_lock); + + lp->stats.tx_bytes += skb->len; + dev->trans_start = jiffies; + dev_kfree_skb (skb); + + /* Check for free resources: stop Tx queue if there are none */ + if (inb (EWRK3_FMQC) == 0) + netif_stop_queue (dev); + + return 0; + +err_out: + ENABLE_IRQs; + spin_unlock_irq (&lp->hw_lock); + return 1; +} + +/* + ** The EWRK3 interrupt handler. + */ +static irqreturn_t ewrk3_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct ewrk3_private *lp; + u_long iobase; + u_char icr, cr, csr; + + lp = netdev_priv(dev); + iobase = dev->base_addr; + + /* get the interrupt information */ + csr = inb(EWRK3_CSR); + + /* + ** Mask the EWRK3 board interrupts and turn on the LED + */ + spin_lock(&lp->hw_lock); + DISABLE_IRQs; + + cr = inb(EWRK3_CR); + cr |= lp->led_mask; + outb(cr, EWRK3_CR); + + if (csr & CSR_RNE) /* Rx interrupt (packet[s] arrived) */ + ewrk3_rx(dev); + + if (csr & CSR_TNE) /* Tx interrupt (packet sent) */ + ewrk3_tx(dev); + + /* + ** Now deal with the TX/RX disable flags. These are set when there + ** are no more resources. If resources free up then enable these + ** interrupts, otherwise mask them - failure to do this will result + ** in the system hanging in an interrupt loop. + */ + if (inb(EWRK3_FMQC)) { /* any resources available? */ + lp->irq_mask |= ICR_TXDM | ICR_RXDM; /* enable the interrupt source */ + csr &= ~(CSR_TXD | CSR_RXD); /* ensure restart of a stalled TX or RX */ + outb(csr, EWRK3_CSR); + netif_wake_queue(dev); + } else { + lp->irq_mask &= ~(ICR_TXDM | ICR_RXDM); /* disable the interrupt source */ + } + + /* Unmask the EWRK3 board interrupts and turn off the LED */ + cr &= ~(lp->led_mask); + outb(cr, EWRK3_CR); + ENABLE_IRQs; + spin_unlock(&lp->hw_lock); + return IRQ_HANDLED; +} + +/* Called with lp->hw_lock held */ +static int ewrk3_rx(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int i, status = 0; + u_char page; + void __iomem *buf = NULL; + + while (inb(EWRK3_RQC) && !status) { /* Whilst there's incoming data */ + if ((page = inb(EWRK3_RQ)) < lp->mPage) { /* Get next entry's buffer page */ + /* + ** Set up shared memory window and pointer into the window + */ + if (lp->shmem_length == IO_ONLY) { + outb(page, EWRK3_IOPR); + } else if (lp->shmem_length == SHMEM_2K) { + buf = lp->shmem; + outb(page, EWRK3_MPR); + } else if (lp->shmem_length == SHMEM_32K) { + buf = (((short) page << 11) & 0x7800) + lp->shmem; + outb((page >> 4), EWRK3_MPR); + } else if (lp->shmem_length == SHMEM_64K) { + buf = (((short) page << 11) & 0xf800) + lp->shmem; + outb((page >> 5), EWRK3_MPR); + } else { + status = -1; + printk("%s: Oops - your private data area is hosed!\n", dev->name); + } + + if (!status) { + char rx_status; + int pkt_len; + + if (lp->shmem_length == IO_ONLY) { + rx_status = inb(EWRK3_DATA); + pkt_len = inb(EWRK3_DATA); + pkt_len |= ((u_short) inb(EWRK3_DATA) << 8); + } else { + rx_status = readb(buf); + buf += 1; + pkt_len = readw(buf); + buf += 3; + } + + if (!(rx_status & R_ROK)) { /* There was an error. */ + lp->stats.rx_errors++; /* Update the error stats. */ + if (rx_status & R_DBE) + lp->stats.rx_frame_errors++; + if (rx_status & R_CRC) + lp->stats.rx_crc_errors++; + if (rx_status & R_PLL) + lp->stats.rx_fifo_errors++; + } else { + struct sk_buff *skb; + + if ((skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + unsigned char *p; + skb->dev = dev; + skb_reserve(skb, 2); /* Align to 16 bytes */ + p = skb_put(skb, pkt_len); + + if (lp->shmem_length == IO_ONLY) { + *p = inb(EWRK3_DATA); /* dummy read */ + for (i = 0; i < pkt_len; i++) { + *p++ = inb(EWRK3_DATA); + } + } else { + memcpy_fromio(p, buf, pkt_len); + } + + for (i = 1; i < EWRK3_PKT_STAT_SZ - 1; i++) { + if (pkt_len < i * EWRK3_PKT_BIN_SZ) { + lp->pktStats.bins[i]++; + i = EWRK3_PKT_STAT_SZ; + } + } + p = skb->data; /* Look at the dest addr */ + if (p[0] & 0x01) { /* Multicast/Broadcast */ + if ((*(s16 *) & p[0] == -1) && (*(s16 *) & p[2] == -1) && (*(s16 *) & p[4] == -1)) { + lp->pktStats.broadcast++; + } else { + lp->pktStats.multicast++; + } + } else if ((*(s16 *) & p[0] == *(s16 *) & dev->dev_addr[0]) && + (*(s16 *) & p[2] == *(s16 *) & dev->dev_addr[2]) && + (*(s16 *) & p[4] == *(s16 *) & dev->dev_addr[4])) { + lp->pktStats.unicast++; + } + lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */ + if (lp->pktStats.bins[0] == 0) { /* Reset counters */ + memset(&lp->pktStats, 0, sizeof(lp->pktStats)); + } + /* + ** Notify the upper protocol layers that there is another + ** packet to handle + */ + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + + /* + ** Update stats + */ + dev->last_rx = jiffies; + lp->stats.rx_packets++; + lp->stats.rx_bytes += pkt_len; + } else { + printk("%s: Insufficient memory; nuking packet.\n", dev->name); + lp->stats.rx_dropped++; /* Really, deferred. */ + break; + } + } + } + /* + ** Return the received buffer to the free memory queue + */ + outb(page, EWRK3_FMQ); + } else { + printk("ewrk3_rx(): Illegal page number, page %d\n", page); + printk("ewrk3_rx(): CSR: %02x ICR: %02x FMQC: %02x\n", inb(EWRK3_CSR), inb(EWRK3_ICR), inb(EWRK3_FMQC)); + } + } + return status; +} + +/* +** Buffer sent - check for TX buffer errors. +** Called with lp->hw_lock held +*/ +static int ewrk3_tx(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + u_char tx_status; + + while ((tx_status = inb(EWRK3_TDQ)) > 0) { /* Whilst there's old buffers */ + if (tx_status & T_VSTS) { /* The status is valid */ + if (tx_status & T_TXE) { + lp->stats.tx_errors++; + if (tx_status & T_NCL) + lp->stats.tx_carrier_errors++; + if (tx_status & T_LCL) + lp->stats.tx_window_errors++; + if (tx_status & T_CTU) { + if ((tx_status & T_COLL) ^ T_XUR) { + lp->pktStats.tx_underruns++; + } else { + lp->pktStats.excessive_underruns++; + } + } else if (tx_status & T_COLL) { + if ((tx_status & T_COLL) ^ T_XCOLL) { + lp->stats.collisions++; + } else { + lp->pktStats.excessive_collisions++; + } + } + } else { + lp->stats.tx_packets++; + } + } + } + + return 0; +} + +static int ewrk3_close(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + u_char icr, csr; + + netif_stop_queue(dev); + + if (ewrk3_debug > 1) { + printk("%s: Shutting down ethercard, status was %2.2x.\n", + dev->name, inb(EWRK3_CSR)); + } + /* + ** We stop the EWRK3 here... mask interrupts and stop TX & RX + */ + DISABLE_IRQs; + + STOP_EWRK3; + + /* + ** Clean out the TX and RX queues here (note that one entry + ** may get added to either the TXD or RX queues if the TX or RX + ** just starts processing a packet before the STOP_EWRK3 command + ** is received. This will be flushed in the ewrk3_open() call). + */ + while (inb(EWRK3_TQ)); + while (inb(EWRK3_TDQ)); + while (inb(EWRK3_RQ)); + + if (!lp->hard_strapped) { + free_irq(dev->irq, dev); + } + return 0; +} + +static struct net_device_stats *ewrk3_get_stats(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + + /* Null body since there is no framing error counter */ + return &lp->stats; +} + +/* + ** Set or clear the multicast filter for this adapter. + */ +static void set_multicast_list(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + u_char csr; + + csr = inb(EWRK3_CSR); + + if (lp->shmem_length == IO_ONLY) { + lp->mctbl = NULL; + } else { + lp->mctbl = lp->shmem + PAGE0_HTE; + } + + csr &= ~(CSR_PME | CSR_MCE); + if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ + csr |= CSR_PME; + outb(csr, EWRK3_CSR); + } else { + SetMulticastFilter(dev); + csr |= CSR_MCE; + outb(csr, EWRK3_CSR); + } +} + +/* + ** Calculate the hash code and update the logical address filter + ** from a list of ethernet multicast addresses. + ** Little endian crc one liner from Matt Thomas, DEC. + ** + ** Note that when clearing the table, the broadcast bit must remain asserted + ** to receive broadcast messages. + */ +static void SetMulticastFilter(struct net_device *dev) +{ + struct ewrk3_private *lp = netdev_priv(dev); + struct dev_mc_list *dmi = dev->mc_list; + u_long iobase = dev->base_addr; + int i; + char *addrs, bit, byte; + short __iomem *p = lp->mctbl; + u16 hashcode; + u32 crc; + + spin_lock_irq(&lp->hw_lock); + + if (lp->shmem_length == IO_ONLY) { + outb(0, EWRK3_IOPR); + outw(PAGE0_HTE, EWRK3_PIR1); + } else { + outb(0, EWRK3_MPR); + } + + if (dev->flags & IFF_ALLMULTI) { + for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) { + if (lp->shmem_length == IO_ONLY) { + outb(0xff, EWRK3_DATA); + } else { /* memset didn't work here */ + writew(0xffff, p); + p++; + i++; + } + } + } else { + /* Clear table except for broadcast bit */ + if (lp->shmem_length == IO_ONLY) { + for (i = 0; i < (HASH_TABLE_LEN >> 4) - 1; i++) { + outb(0x00, EWRK3_DATA); + } + outb(0x80, EWRK3_DATA); + i++; /* insert the broadcast bit */ + for (; i < (HASH_TABLE_LEN >> 3); i++) { + outb(0x00, EWRK3_DATA); + } + } else { + memset_io(lp->mctbl, 0, HASH_TABLE_LEN >> 3); + writeb(0x80, lp->mctbl + (HASH_TABLE_LEN >> 4) - 1); + } + + /* Update table */ + for (i = 0; i < dev->mc_count; i++) { /* for each address in the list */ + addrs = dmi->dmi_addr; + dmi = dmi->next; + if ((*addrs & 0x01) == 1) { /* multicast address? */ + crc = ether_crc_le(ETH_ALEN, addrs); + hashcode = crc & ((1 << 9) - 1); /* hashcode is 9 LSb of CRC */ + + byte = hashcode >> 3; /* bit[3-8] -> byte in filter */ + bit = 1 << (hashcode & 0x07); /* bit[0-2] -> bit in byte */ + + if (lp->shmem_length == IO_ONLY) { + u_char tmp; + + outw(PAGE0_HTE + byte, EWRK3_PIR1); + tmp = inb(EWRK3_DATA); + tmp |= bit; + outw(PAGE0_HTE + byte, EWRK3_PIR1); + outb(tmp, EWRK3_DATA); + } else { + writeb(readb(lp->mctbl + byte) | bit, lp->mctbl + byte); + } + } + } + } + + spin_unlock_irq(&lp->hw_lock); +} + +/* + ** ISA bus I/O device probe + */ +static int __init isa_probe(struct net_device *dev, u_long ioaddr) +{ + int i = num_ewrks3s, maxSlots; + int ret = -ENODEV; + + u_long iobase; + + if (ioaddr >= 0x400) + goto out; + + if (ioaddr == 0) { /* Autoprobing */ + iobase = EWRK3_IO_BASE; /* Get the first slot address */ + maxSlots = 24; + } else { /* Probe a specific location */ + iobase = ioaddr; + maxSlots = i + 1; + } + + for (; (i < maxSlots) && (dev != NULL); + iobase += EWRK3_IOP_INC, i++) + { + if (request_region(iobase, EWRK3_TOTAL_SIZE, DRV_NAME)) { + if (DevicePresent(iobase) == 0) { + int irq = dev->irq; + ret = ewrk3_hw_init(dev, iobase); + if (!ret) + break; + dev->irq = irq; + } + release_region(iobase, EWRK3_TOTAL_SIZE); + } + } + out: + + return ret; +} + +/* + ** EISA bus I/O device probe. Probe from slot 1 since slot 0 is usually + ** the motherboard. + */ +static int __init eisa_probe(struct net_device *dev, u_long ioaddr) +{ + int i, maxSlots; + u_long iobase; + int ret = -ENODEV; + + if (ioaddr < 0x1000) + goto out; + + if (ioaddr == 0) { /* Autoprobing */ + iobase = EISA_SLOT_INC; /* Get the first slot address */ + i = 1; + maxSlots = MAX_EISA_SLOTS; + } else { /* Probe a specific location */ + iobase = ioaddr; + i = (ioaddr >> 12); + maxSlots = i + 1; + } + + for (i = 1; (i < maxSlots) && (dev != NULL); i++, iobase += EISA_SLOT_INC) { + if (EISA_signature(name, EISA_ID) == 0) { + if (request_region(iobase, EWRK3_TOTAL_SIZE, DRV_NAME) && + DevicePresent(iobase) == 0) { + int irq = dev->irq; + ret = ewrk3_hw_init(dev, iobase); + if (!ret) + break; + dev->irq = irq; + } + release_region(iobase, EWRK3_TOTAL_SIZE); + } + } + + out: + return ret; +} + + +/* + ** Read the EWRK3 EEPROM using this routine + */ +static int Read_EEPROM(u_long iobase, u_char eaddr) +{ + int i; + + outb((eaddr & 0x3f), EWRK3_PIR1); /* set up 6 bits of address info */ + outb(EEPROM_RD, EWRK3_IOPR); /* issue read command */ + for (i = 0; i < 5000; i++) + inb(EWRK3_CSR); /* wait 1msec */ + + return inw(EWRK3_EPROM1); /* 16 bits data return */ +} + +/* + ** Write the EWRK3 EEPROM using this routine + */ +static int Write_EEPROM(short data, u_long iobase, u_char eaddr) +{ + int i; + + outb(EEPROM_WR_EN, EWRK3_IOPR); /* issue write enable command */ + for (i = 0; i < 5000; i++) + inb(EWRK3_CSR); /* wait 1msec */ + outw(data, EWRK3_EPROM1); /* write data to register */ + outb((eaddr & 0x3f), EWRK3_PIR1); /* set up 6 bits of address info */ + outb(EEPROM_WR, EWRK3_IOPR); /* issue write command */ + for (i = 0; i < 75000; i++) + inb(EWRK3_CSR); /* wait 15msec */ + outb(EEPROM_WR_DIS, EWRK3_IOPR); /* issue write disable command */ + for (i = 0; i < 5000; i++) + inb(EWRK3_CSR); /* wait 1msec */ + + return 0; +} + +/* + ** Look for a particular board name in the on-board EEPROM. + */ +static void __init EthwrkSignature(char *name, char *eeprom_image) +{ + int i; + char *signatures[] = EWRK3_SIGNATURE; + + for (i=0; *signatures[i] != '\0'; i++) + if( !strncmp(eeprom_image+EEPROM_PNAME7, signatures[i], strlen(signatures[i])) ) + break; + + if (*signatures[i] != '\0') { + memcpy(name, eeprom_image+EEPROM_PNAME7, EWRK3_STRLEN); + name[EWRK3_STRLEN] = '\0'; + } else + name[0] = '\0'; + + return; +} + +/* + ** Look for a special sequence in the Ethernet station address PROM that + ** is common across all EWRK3 products. + ** + ** Search the Ethernet address ROM for the signature. Since the ROM address + ** counter can start at an arbitrary point, the search must include the entire + ** probe sequence length plus the (length_of_the_signature - 1). + ** Stop the search IMMEDIATELY after the signature is found so that the + ** PROM address counter is correctly positioned at the start of the + ** ethernet address for later read out. + */ + +static int __init DevicePresent(u_long iobase) +{ + union { + struct { + u32 a; + u32 b; + } llsig; + char Sig[sizeof(u32) << 1]; + } + dev; + short sigLength; + char data; + int i, j, status = 0; + + dev.llsig.a = ETH_PROM_SIG; + dev.llsig.b = ETH_PROM_SIG; + sigLength = sizeof(u32) << 1; + + for (i = 0, j = 0; j < sigLength && i < PROBE_LENGTH + sigLength - 1; i++) { + data = inb(EWRK3_APROM); + if (dev.Sig[j] == data) { /* track signature */ + j++; + } else { /* lost signature; begin search again */ + if (data == dev.Sig[0]) { + j = 1; + } else { + j = 0; + } + } + } + + if (j != sigLength) { + status = -ENODEV; /* search failed */ + } + return status; +} + +static u_char __init get_hw_addr(struct net_device *dev, u_char * eeprom_image, char chipType) +{ + int i, j, k; + u_short chksum; + u_char crc, lfsr, sd, status = 0; + u_long iobase = dev->base_addr; + u16 tmp; + + if (chipType == LeMAC2) { + for (crc = 0x6a, j = 0; j < ETH_ALEN; j++) { + sd = dev->dev_addr[j] = eeprom_image[EEPROM_PADDR0 + j]; + outb(dev->dev_addr[j], EWRK3_PAR0 + j); + for (k = 0; k < 8; k++, sd >>= 1) { + lfsr = ((((crc & 0x02) >> 1) ^ (crc & 0x01)) ^ (sd & 0x01)) << 7; + crc = (crc >> 1) + lfsr; + } + } + if (crc != eeprom_image[EEPROM_PA_CRC]) + status = -1; + } else { + for (i = 0, k = 0; i < ETH_ALEN;) { + k <<= 1; + if (k > 0xffff) + k -= 0xffff; + + k += (u_char) (tmp = inb(EWRK3_APROM)); + dev->dev_addr[i] = (u_char) tmp; + outb(dev->dev_addr[i], EWRK3_PAR0 + i); + i++; + k += (u_short) ((tmp = inb(EWRK3_APROM)) << 8); + dev->dev_addr[i] = (u_char) tmp; + outb(dev->dev_addr[i], EWRK3_PAR0 + i); + i++; + + if (k > 0xffff) + k -= 0xffff; + } + if (k == 0xffff) + k = 0; + chksum = inb(EWRK3_APROM); + chksum |= (inb(EWRK3_APROM) << 8); + if (k != chksum) + status = -1; + } + + return status; +} + +/* + ** Look for a particular board name in the EISA configuration space + */ +static int __init EISA_signature(char *name, s32 eisa_id) +{ + u_long i; + char *signatures[] = EWRK3_SIGNATURE; + char ManCode[EWRK3_STRLEN]; + union { + s32 ID; + char Id[4]; + } Eisa; + int status = 0; + + *name = '\0'; + for (i = 0; i < 4; i++) { + Eisa.Id[i] = inb(eisa_id + i); + } + + ManCode[0] = (((Eisa.Id[0] >> 2) & 0x1f) + 0x40); + ManCode[1] = (((Eisa.Id[1] & 0xe0) >> 5) + ((Eisa.Id[0] & 0x03) << 3) + 0x40); + ManCode[2] = (((Eisa.Id[2] >> 4) & 0x0f) + 0x30); + ManCode[3] = ((Eisa.Id[2] & 0x0f) + 0x30); + ManCode[4] = (((Eisa.Id[3] >> 4) & 0x0f) + 0x30); + ManCode[5] = '\0'; + + for (i = 0; (*signatures[i] != '\0') && (*name == '\0'); i++) { + if (strstr(ManCode, signatures[i]) != NULL) { + strcpy(name, ManCode); + status = 1; + } + } + + return status; /* return the device name string */ +} + +static void ewrk3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + int fwrev = Read_EEPROM(dev->base_addr, EEPROM_REVLVL); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + sprintf(info->fw_version, "%d", fwrev); + strcpy(info->bus_info, "N/A"); + info->eedump_len = EEPROM_MAX; +} + +static int ewrk3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct ewrk3_private *lp = netdev_priv(dev); + unsigned long iobase = dev->base_addr; + u8 cr = inb(EWRK3_CR); + + switch (lp->adapter_name[4]) { + case '3': /* DE203 */ + ecmd->supported = SUPPORTED_BNC; + ecmd->port = PORT_BNC; + break; + + case '4': /* DE204 */ + ecmd->supported = SUPPORTED_TP; + ecmd->port = PORT_TP; + break; + + case '5': /* DE205 */ + ecmd->supported = SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_AUI; + ecmd->autoneg = !(cr & CR_APD); + /* + ** Port is only valid if autoneg is disabled + ** and even then we don't know if AUI is jumpered. + */ + if (!ecmd->autoneg) + ecmd->port = (cr & CR_PSEL) ? PORT_BNC : PORT_TP; + break; + } + + ecmd->supported |= SUPPORTED_10baseT_Half; + ecmd->speed = SPEED_10; + ecmd->duplex = DUPLEX_HALF; + return 0; +} + +static int ewrk3_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct ewrk3_private *lp = netdev_priv(dev); + unsigned long iobase = dev->base_addr; + unsigned long flags; + u8 cr; + + /* DE205 is the only card with anything to set */ + if (lp->adapter_name[4] != '5') + return -EOPNOTSUPP; + + /* Sanity-check parameters */ + if (ecmd->speed != SPEED_10) + return -EINVAL; + if (ecmd->port != PORT_TP && ecmd->port != PORT_BNC) + return -EINVAL; /* AUI is not software-selectable */ + if (ecmd->transceiver != XCVR_INTERNAL) + return -EINVAL; + if (ecmd->duplex != DUPLEX_HALF) + return -EINVAL; + if (ecmd->phy_address != 0) + return -EINVAL; + + spin_lock_irqsave(&lp->hw_lock, flags); + cr = inb(EWRK3_CR); + + /* If Autoneg is set, change to Auto Port mode */ + /* Otherwise, disable Auto Port and set port explicitly */ + if (ecmd->autoneg) { + cr &= ~CR_APD; + } else { + cr |= CR_APD; + if (ecmd->port == PORT_TP) + cr &= ~CR_PSEL; /* Force TP */ + else + cr |= CR_PSEL; /* Force BNC */ + } + + /* Commit the changes */ + outb(cr, EWRK3_CR); + spin_unlock_irqrestore(&lp->hw_lock, flags); + return 0; +} + +static u32 ewrk3_get_link(struct net_device *dev) +{ + unsigned long iobase = dev->base_addr; + u8 cmr = inb(EWRK3_CMR); + /* DE203 has BNC only and link status does not apply */ + /* On DE204 this is always valid since TP is the only port. */ + /* On DE205 this reflects TP status even if BNC or AUI is selected. */ + return !(cmr & CMR_LINK); +} + +static int ewrk3_phys_id(struct net_device *dev, u32 data) +{ + struct ewrk3_private *lp = netdev_priv(dev); + unsigned long iobase = dev->base_addr; + unsigned long flags; + u8 cr; + int count; + + /* Toggle LED 4x per second */ + count = data << 2; + + spin_lock_irqsave(&lp->hw_lock, flags); + + /* Bail if a PHYS_ID is already in progress */ + if (lp->led_mask == 0) { + spin_unlock_irqrestore(&lp->hw_lock, flags); + return -EBUSY; + } + + /* Prevent ISR from twiddling the LED */ + lp->led_mask = 0; + + while (count--) { + /* Toggle the LED */ + cr = inb(EWRK3_CR); + outb(cr ^ CR_LED, EWRK3_CR); + + /* Wait a little while */ + spin_unlock_irqrestore(&lp->hw_lock, flags); + msleep(250); + spin_lock_irqsave(&lp->hw_lock, flags); + + /* Exit if we got a signal */ + if (signal_pending(current)) + break; + } + + lp->led_mask = CR_LED; + cr = inb(EWRK3_CR); + outb(cr & ~CR_LED, EWRK3_CR); + spin_unlock_irqrestore(&lp->hw_lock, flags); + return signal_pending(current) ? -ERESTARTSYS : 0; +} + +static struct ethtool_ops ethtool_ops_203 = { + .get_drvinfo = ewrk3_get_drvinfo, + .get_settings = ewrk3_get_settings, + .set_settings = ewrk3_set_settings, + .phys_id = ewrk3_phys_id, +}; + +static struct ethtool_ops ethtool_ops = { + .get_drvinfo = ewrk3_get_drvinfo, + .get_settings = ewrk3_get_settings, + .set_settings = ewrk3_set_settings, + .get_link = ewrk3_get_link, + .phys_id = ewrk3_phys_id, +}; + +/* + ** Perform IOCTL call functions here. Some are privileged operations and the + ** effective uid is checked in those cases. + */ +static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct ewrk3_private *lp = netdev_priv(dev); + struct ewrk3_ioctl *ioc = (struct ewrk3_ioctl *) &rq->ifr_ifru; + u_long iobase = dev->base_addr; + int i, j, status = 0; + u_char csr; + unsigned long flags; + union ewrk3_addr { + u_char addr[HASH_TABLE_LEN * ETH_ALEN]; + u_short val[(HASH_TABLE_LEN * ETH_ALEN) >> 1]; + }; + + union ewrk3_addr *tmp; + + /* All we handle are private IOCTLs */ + if (cmd != EWRK3IOCTL) + return -EOPNOTSUPP; + + tmp = kmalloc(sizeof(union ewrk3_addr), GFP_KERNEL); + if(tmp==NULL) + return -ENOMEM; + + switch (ioc->cmd) { + case EWRK3_GET_HWADDR: /* Get the hardware address */ + for (i = 0; i < ETH_ALEN; i++) { + tmp->addr[i] = dev->dev_addr[i]; + } + ioc->len = ETH_ALEN; + if (copy_to_user(ioc->data, tmp->addr, ioc->len)) + status = -EFAULT; + break; + + case EWRK3_SET_HWADDR: /* Set the hardware address */ + if (capable(CAP_NET_ADMIN)) { + spin_lock_irqsave(&lp->hw_lock, flags); + csr = inb(EWRK3_CSR); + csr |= (CSR_TXD | CSR_RXD); + outb(csr, EWRK3_CSR); /* Disable the TX and RX */ + spin_unlock_irqrestore(&lp->hw_lock, flags); + + if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN)) { + status = -EFAULT; + break; + } + spin_lock_irqsave(&lp->hw_lock, flags); + for (i = 0; i < ETH_ALEN; i++) { + dev->dev_addr[i] = tmp->addr[i]; + outb(tmp->addr[i], EWRK3_PAR0 + i); + } + + csr = inb(EWRK3_CSR); + csr &= ~(CSR_TXD | CSR_RXD); /* Enable the TX and RX */ + outb(csr, EWRK3_CSR); + spin_unlock_irqrestore(&lp->hw_lock, flags); + } else { + status = -EPERM; + } + + break; + case EWRK3_SET_PROM: /* Set Promiscuous Mode */ + if (capable(CAP_NET_ADMIN)) { + spin_lock_irqsave(&lp->hw_lock, flags); + csr = inb(EWRK3_CSR); + csr |= CSR_PME; + csr &= ~CSR_MCE; + outb(csr, EWRK3_CSR); + spin_unlock_irqrestore(&lp->hw_lock, flags); + } else { + status = -EPERM; + } + + break; + case EWRK3_CLR_PROM: /* Clear Promiscuous Mode */ + if (capable(CAP_NET_ADMIN)) { + spin_lock_irqsave(&lp->hw_lock, flags); + csr = inb(EWRK3_CSR); + csr &= ~CSR_PME; + outb(csr, EWRK3_CSR); + spin_unlock_irqrestore(&lp->hw_lock, flags); + } else { + status = -EPERM; + } + + break; + case EWRK3_GET_MCA: /* Get the multicast address table */ + spin_lock_irqsave(&lp->hw_lock, flags); + if (lp->shmem_length == IO_ONLY) { + outb(0, EWRK3_IOPR); + outw(PAGE0_HTE, EWRK3_PIR1); + for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) { + tmp->addr[i] = inb(EWRK3_DATA); + } + } else { + outb(0, EWRK3_MPR); + memcpy_fromio(tmp->addr, lp->shmem + PAGE0_HTE, (HASH_TABLE_LEN >> 3)); + } + spin_unlock_irqrestore(&lp->hw_lock, flags); + + ioc->len = (HASH_TABLE_LEN >> 3); + if (copy_to_user(ioc->data, tmp->addr, ioc->len)) + status = -EFAULT; + + break; + case EWRK3_SET_MCA: /* Set a multicast address */ + if (capable(CAP_NET_ADMIN)) { + if (ioc->len > 1024) + { + status = -EINVAL; + break; + } + if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN * ioc->len)) { + status = -EFAULT; + break; + } + set_multicast_list(dev); + } else { + status = -EPERM; + } + + break; + case EWRK3_CLR_MCA: /* Clear all multicast addresses */ + if (capable(CAP_NET_ADMIN)) { + set_multicast_list(dev); + } else { + status = -EPERM; + } + + break; + case EWRK3_MCA_EN: /* Enable multicast addressing */ + if (capable(CAP_NET_ADMIN)) { + spin_lock_irqsave(&lp->hw_lock, flags); + csr = inb(EWRK3_CSR); + csr |= CSR_MCE; + csr &= ~CSR_PME; + outb(csr, EWRK3_CSR); + spin_unlock_irqrestore(&lp->hw_lock, flags); + } else { + status = -EPERM; + } + + break; + case EWRK3_GET_STATS: { /* Get the driver statistics */ + struct ewrk3_stats *tmp_stats = + kmalloc(sizeof(lp->pktStats), GFP_KERNEL); + if (!tmp_stats) { + status = -ENOMEM; + break; + } + + spin_lock_irqsave(&lp->hw_lock, flags); + memcpy(tmp_stats, &lp->pktStats, sizeof(lp->pktStats)); + spin_unlock_irqrestore(&lp->hw_lock, flags); + + ioc->len = sizeof(lp->pktStats); + if (copy_to_user(ioc->data, tmp_stats, sizeof(lp->pktStats))) + status = -EFAULT; + kfree(tmp_stats); + break; + } + case EWRK3_CLR_STATS: /* Zero out the driver statistics */ + if (capable(CAP_NET_ADMIN)) { + spin_lock_irqsave(&lp->hw_lock, flags); + memset(&lp->pktStats, 0, sizeof(lp->pktStats)); + spin_unlock_irqrestore(&lp->hw_lock,flags); + } else { + status = -EPERM; + } + + break; + case EWRK3_GET_CSR: /* Get the CSR Register contents */ + tmp->addr[0] = inb(EWRK3_CSR); + ioc->len = 1; + if (copy_to_user(ioc->data, tmp->addr, ioc->len)) + status = -EFAULT; + break; + case EWRK3_SET_CSR: /* Set the CSR Register contents */ + if (capable(CAP_NET_ADMIN)) { + if (copy_from_user(tmp->addr, ioc->data, 1)) { + status = -EFAULT; + break; + } + outb(tmp->addr[0], EWRK3_CSR); + } else { + status = -EPERM; + } + + break; + case EWRK3_GET_EEPROM: /* Get the EEPROM contents */ + if (capable(CAP_NET_ADMIN)) { + for (i = 0; i < (EEPROM_MAX >> 1); i++) { + tmp->val[i] = (short) Read_EEPROM(iobase, i); + } + i = EEPROM_MAX; + tmp->addr[i++] = inb(EWRK3_CMR); /* Config/Management Reg. */ + for (j = 0; j < ETH_ALEN; j++) { + tmp->addr[i++] = inb(EWRK3_PAR0 + j); + } + ioc->len = EEPROM_MAX + 1 + ETH_ALEN; + if (copy_to_user(ioc->data, tmp->addr, ioc->len)) + status = -EFAULT; + } else { + status = -EPERM; + } + + break; + case EWRK3_SET_EEPROM: /* Set the EEPROM contents */ + if (capable(CAP_NET_ADMIN)) { + if (copy_from_user(tmp->addr, ioc->data, EEPROM_MAX)) { + status = -EFAULT; + break; + } + for (i = 0; i < (EEPROM_MAX >> 1); i++) { + Write_EEPROM(tmp->val[i], iobase, i); + } + } else { + status = -EPERM; + } + + break; + case EWRK3_GET_CMR: /* Get the CMR Register contents */ + tmp->addr[0] = inb(EWRK3_CMR); + ioc->len = 1; + if (copy_to_user(ioc->data, tmp->addr, ioc->len)) + status = -EFAULT; + break; + case EWRK3_SET_TX_CUT_THRU: /* Set TX cut through mode */ + if (capable(CAP_NET_ADMIN)) { + lp->txc = 1; + } else { + status = -EPERM; + } + + break; + case EWRK3_CLR_TX_CUT_THRU: /* Clear TX cut through mode */ + if (capable(CAP_NET_ADMIN)) { + lp->txc = 0; + } else { + status = -EPERM; + } + + break; + default: + status = -EOPNOTSUPP; + } + kfree(tmp); + return status; +} + +#ifdef MODULE +static struct net_device *ewrk3_devs[MAX_NUM_EWRK3S]; +static int ndevs; +static int io[MAX_NUM_EWRK3S+1] = { 0x300, 0, }; + +/* '21' below should really be 'MAX_NUM_EWRK3S' */ +module_param_array(io, int, NULL, 0); +module_param_array(irq, int, NULL, 0); +MODULE_PARM_DESC(io, "EtherWORKS 3 I/O base address(es)"); +MODULE_PARM_DESC(irq, "EtherWORKS 3 IRQ number(s)"); + +static __exit void ewrk3_exit_module(void) +{ + int i; + + for( i=0; i<ndevs; i++ ) { + struct net_device *dev = ewrk3_devs[i]; + struct ewrk3_private *lp = netdev_priv(dev); + ewrk3_devs[i] = NULL; + unregister_netdev(dev); + release_region(dev->base_addr, EWRK3_TOTAL_SIZE); + iounmap(lp->shmem); + free_netdev(dev); + } +} + +static __init int ewrk3_init_module(void) +{ + int i=0; + + while( io[i] && irq[i] ) { + struct net_device *dev + = alloc_etherdev(sizeof(struct ewrk3_private)); + + if (!dev) + break; + + if (ewrk3_probe1(dev, io[i], irq[i]) != 0) { + free_netdev(dev); + break; + } + + ewrk3_devs[ndevs++] = dev; + i++; + } + + return ndevs ? 0 : -EIO; +} + + +/* Hack for breakage in new module stuff */ +module_exit(ewrk3_exit_module); +module_init(ewrk3_init_module); +#endif /* MODULE */ +MODULE_LICENSE("GPL"); + + + +/* + * Local variables: + * compile-command: "gcc -D__KERNEL__ -I/linux/include -Wall -Wstrict-prototypes -fomit-frame-pointer -fno-strength-reduce -malign-loops=2 -malign-jumps=2 -malign-functions=2 -O2 -m486 -c ewrk3.c" + * + * compile-command: "gcc -D__KERNEL__ -DMODULE -I/linux/include -Wall -Wstrict-prototypes -fomit-frame-pointer -fno-strength-reduce -malign-loops=2 -malign-jumps=2 -malign-functions=2 -O2 -m486 -c ewrk3.c" + * End: + */ |