summaryrefslogtreecommitdiff
path: root/drivers/net/fddi/Kconfig
diff options
context:
space:
mode:
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-07-31 07:06:29 (GMT)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-08-27 07:58:13 (GMT)
commit33f810b2036f13f1b123062a9e5c1794d400ce81 (patch)
tree370b55026f4bd856e96842f86af631ca2bab3da2 /drivers/net/fddi/Kconfig
parent3cd0999d134235d64b175edd2eb1d46ebc97b377 (diff)
downloadlinux-33f810b2036f13f1b123062a9e5c1794d400ce81.tar.xz
fddi: Move the FDDI drivers
Move the FDDI drivers into drivers/net/fddi/ and make the necessary Kconfig and Makefile changes. CC: "Maciej W. Rozycki" <macro@linux-mips.org> CC: Christoph Goos <cgoos@syskonnect.de> CC: <linux@syskonnect.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/fddi/Kconfig')
-rw-r--r--drivers/net/fddi/Kconfig77
1 files changed, 77 insertions, 0 deletions
diff --git a/drivers/net/fddi/Kconfig b/drivers/net/fddi/Kconfig
new file mode 100644
index 0000000..3a424c8
--- /dev/null
+++ b/drivers/net/fddi/Kconfig
@@ -0,0 +1,77 @@
+#
+# FDDI network device configuration
+#
+
+config FDDI
+ tristate "FDDI driver support"
+ depends on PCI || EISA || TC
+ ---help---
+ Fiber Distributed Data Interface is a high speed local area network
+ design; essentially a replacement for high speed Ethernet. FDDI can
+ run over copper or fiber. If you are connected to such a network and
+ want a driver for the FDDI card in your computer, say Y here (and
+ then also Y to the driver for your FDDI card, below). Most people
+ will say N.
+
+if FDDI
+
+config DEFXX
+ tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
+ depends on FDDI && (PCI || EISA || TC)
+ ---help---
+ This is support for the DIGITAL series of TURBOchannel (DEFTA),
+ EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
+ to a local FDDI network.
+
+ To compile this driver as a module, choose M here: the module
+ will be called defxx. If unsure, say N.
+
+config DEFXX_MMIO
+ bool
+ prompt "Use MMIO instead of PIO" if PCI || EISA
+ depends on DEFXX
+ default n if PCI || EISA
+ default y
+ ---help---
+ This instructs the driver to use EISA or PCI memory-mapped I/O
+ (MMIO) as appropriate instead of programmed I/O ports (PIO).
+ Enabling this gives an improvement in processing time in parts
+ of the driver, but it may cause problems with EISA (DEFEA)
+ adapters. TURBOchannel does not have the concept of I/O ports,
+ so MMIO is always used for these (DEFTA) adapters.
+
+ If unsure, say N.
+
+config SKFP
+ tristate "SysKonnect FDDI PCI support"
+ depends on FDDI && PCI
+ select BITREVERSE
+ ---help---
+ Say Y here if you have a SysKonnect FDDI PCI adapter.
+ The following adapters are supported by this driver:
+ - SK-5521 (SK-NET FDDI-UP)
+ - SK-5522 (SK-NET FDDI-UP DAS)
+ - SK-5541 (SK-NET FDDI-FP)
+ - SK-5543 (SK-NET FDDI-LP)
+ - SK-5544 (SK-NET FDDI-LP DAS)
+ - SK-5821 (SK-NET FDDI-UP64)
+ - SK-5822 (SK-NET FDDI-UP64 DAS)
+ - SK-5841 (SK-NET FDDI-FP64)
+ - SK-5843 (SK-NET FDDI-LP64)
+ - SK-5844 (SK-NET FDDI-LP64 DAS)
+ - Netelligent 100 FDDI DAS Fibre SC
+ - Netelligent 100 FDDI SAS Fibre SC
+ - Netelligent 100 FDDI DAS UTP
+ - Netelligent 100 FDDI SAS UTP
+ - Netelligent 100 FDDI SAS Fibre MIC
+
+ Read <file:Documentation/networking/skfp.txt> for information about
+ the driver.
+
+ Questions concerning this driver can be addressed to:
+ <linux@syskonnect.de>
+
+ To compile this driver as a module, choose M here: the module
+ will be called skfp. This is recommended.
+
+endif # FDDI