igbvf: add new driver to support 82576 virtual functions

This adds an igbvf driver to handle virtual functions provided by the
igb driver when SR-IOV has been enabled.  A virtual function is a
lightweight pci-e function that supports a single queue and shares
resources with the 82576 physical function contained within the igb
driver.

To spawn virtual functions from the igb driver all that is needed is to
enable CONFIG_PCI_IOV and have an 82576 Ethernet adapter on a system that
supports SR-IOV in the BIOS.  The virtual functions will appear after the
interface is loaded.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 350 insertions, 0 deletions

diff --git a/drivers/net/igbvf/mbx.c b/drivers/net/igbvf/mbx.c
new file mode 100644
index 0000000..819a8ec
--- /dev/null
+++ b/drivers/net/igbvf/mbx.c
@@ -0,0 +1,350 @@
+/*******************************************************************************
+
+  Intel(R) 82576 Virtual Function Linux driver
+  Copyright(c) 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "mbx.h"
+
+/**
+ *  e1000_poll_for_msg - Wait for message notification
+ *  @hw: pointer to the HW structure
+ *
+ *  returns SUCCESS if it successfully received a message notification
+ **/
+static s32 e1000_poll_for_msg(struct e1000_hw *hw)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	if (!mbx->ops.check_for_msg)
+		goto out;
+
+	while (countdown && mbx->ops.check_for_msg(hw)) {
+		countdown--;
+		udelay(mbx->usec_delay);
+	}
+
+	/* if we failed, all future posted messages fail until reset */
+	if (!countdown)
+		mbx->timeout = 0;
+out:
+	return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
+}
+
+/**
+ *  e1000_poll_for_ack - Wait for message acknowledgement
+ *  @hw: pointer to the HW structure
+ *
+ *  returns SUCCESS if it successfully received a message acknowledgement
+ **/
+static s32 e1000_poll_for_ack(struct e1000_hw *hw)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	int countdown = mbx->timeout;
+
+	if (!mbx->ops.check_for_ack)
+		goto out;
+
+	while (countdown && mbx->ops.check_for_ack(hw)) {
+		countdown--;
+		udelay(mbx->usec_delay);
+	}
+
+	/* if we failed, all future posted messages fail until reset */
+	if (!countdown)
+		mbx->timeout = 0;
+out:
+	return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
+}
+
+/**
+ *  e1000_read_posted_mbx - Wait for message notification and receive message
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *
+ *  returns SUCCESS if it successfully received a message notification and
+ *  copied it into the receive buffer.
+ **/
+static s32 e1000_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = -E1000_ERR_MBX;
+
+	if (!mbx->ops.read)
+		goto out;
+
+	ret_val = e1000_poll_for_msg(hw);
+
+	/* if ack received read message, otherwise we timed out */
+	if (!ret_val)
+		ret_val = mbx->ops.read(hw, msg, size);
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_write_posted_mbx - Write a message to the mailbox, wait for ack
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer and
+ *  received an ack to that message within delay * timeout period
+ **/
+static s32 e1000_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+	s32 ret_val = -E1000_ERR_MBX;
+
+	/* exit if we either can't write or there isn't a defined timeout */
+	if (!mbx->ops.write || !mbx->timeout)
+		goto out;
+
+	/* send msg*/
+	ret_val = mbx->ops.write(hw, msg, size);
+
+	/* if msg sent wait until we receive an ack */
+	if (!ret_val)
+		ret_val = e1000_poll_for_ack(hw);
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_read_v2p_mailbox - read v2p mailbox
+ *  @hw: pointer to the HW structure
+ *
+ *  This function is used to read the v2p mailbox without losing the read to
+ *  clear status bits.
+ **/
+static u32 e1000_read_v2p_mailbox(struct e1000_hw *hw)
+{
+	u32 v2p_mailbox = er32(V2PMAILBOX(0));
+
+	v2p_mailbox |= hw->dev_spec.vf.v2p_mailbox;
+	hw->dev_spec.vf.v2p_mailbox |= v2p_mailbox & E1000_V2PMAILBOX_R2C_BITS;
+
+	return v2p_mailbox;
+}
+
+/**
+ *  e1000_check_for_bit_vf - Determine if a status bit was set
+ *  @hw: pointer to the HW structure
+ *  @mask: bitmask for bits to be tested and cleared
+ *
+ *  This function is used to check for the read to clear bits within
+ *  the V2P mailbox.
+ **/
+static s32 e1000_check_for_bit_vf(struct e1000_hw *hw, u32 mask)
+{
+	u32 v2p_mailbox = e1000_read_v2p_mailbox(hw);
+	s32 ret_val = -E1000_ERR_MBX;
+
+	if (v2p_mailbox & mask)
+		ret_val = E1000_SUCCESS;
+
+	hw->dev_spec.vf.v2p_mailbox &= ~mask;
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_for_msg_vf - checks to see if the PF has sent mail
+ *  @hw: pointer to the HW structure
+ *
+ *  returns SUCCESS if the PF has set the Status bit or else ERR_MBX
+ **/
+static s32 e1000_check_for_msg_vf(struct e1000_hw *hw)
+{
+	s32 ret_val = -E1000_ERR_MBX;
+
+	if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFSTS)) {
+		ret_val = E1000_SUCCESS;
+		hw->mbx.stats.reqs++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_for_ack_vf - checks to see if the PF has ACK'd
+ *  @hw: pointer to the HW structure
+ *
+ *  returns SUCCESS if the PF has set the ACK bit or else ERR_MBX
+ **/
+static s32 e1000_check_for_ack_vf(struct e1000_hw *hw)
+{
+	s32 ret_val = -E1000_ERR_MBX;
+
+	if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFACK)) {
+		ret_val = E1000_SUCCESS;
+		hw->mbx.stats.acks++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_check_for_rst_vf - checks to see if the PF has reset
+ *  @hw: pointer to the HW structure
+ *
+ *  returns true if the PF has set the reset done bit or else false
+ **/
+static s32 e1000_check_for_rst_vf(struct e1000_hw *hw)
+{
+	s32 ret_val = -E1000_ERR_MBX;
+
+	if (!e1000_check_for_bit_vf(hw, (E1000_V2PMAILBOX_RSTD |
+	                                 E1000_V2PMAILBOX_RSTI))) {
+		ret_val = E1000_SUCCESS;
+		hw->mbx.stats.rsts++;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  e1000_obtain_mbx_lock_vf - obtain mailbox lock
+ *  @hw: pointer to the HW structure
+ *
+ *  return SUCCESS if we obtained the mailbox lock
+ **/
+static s32 e1000_obtain_mbx_lock_vf(struct e1000_hw *hw)
+{
+	s32 ret_val = -E1000_ERR_MBX;
+
+	/* Take ownership of the buffer */
+	ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_VFU);
+
+	/* reserve mailbox for vf use */
+	if (e1000_read_v2p_mailbox(hw) & E1000_V2PMAILBOX_VFU)
+		ret_val = E1000_SUCCESS;
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_mbx_vf - Write a message to the mailbox
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *
+ *  returns SUCCESS if it successfully copied message into the buffer
+ **/
+static s32 e1000_write_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
+{
+	s32 err;
+	u16 i;
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	err = e1000_obtain_mbx_lock_vf(hw);
+	if (err)
+		goto out_no_write;
+
+	/* flush any ack or msg as we are going to overwrite mailbox */
+	e1000_check_for_ack_vf(hw);
+	e1000_check_for_msg_vf(hw);
+
+	/* copy the caller specified message to the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		array_ew32(VMBMEM(0), i, msg[i]);
+
+	/* update stats */
+	hw->mbx.stats.msgs_tx++;
+
+	/* Drop VFU and interrupt the PF to tell it a message has been sent */
+	ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_REQ);
+
+out_no_write:
+	return err;
+}
+
+/**
+ *  e1000_read_mbx_vf - Reads a message from the inbox intended for vf
+ *  @hw: pointer to the HW structure
+ *  @msg: The message buffer
+ *  @size: Length of buffer
+ *
+ *  returns SUCCESS if it successfuly read message from buffer
+ **/
+static s32 e1000_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
+{
+	s32 err;
+	u16 i;
+
+	/* lock the mailbox to prevent pf/vf race condition */
+	err = e1000_obtain_mbx_lock_vf(hw);
+	if (err)
+		goto out_no_read;
+
+	/* copy the message from the mailbox memory buffer */
+	for (i = 0; i < size; i++)
+		msg[i] = array_er32(VMBMEM(0), i);
+
+	/* Acknowledge receipt and release mailbox, then we're done */
+	ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_ACK);
+
+	/* update stats */
+	hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+	return err;
+}
+
+/**
+ *  e1000_init_mbx_params_vf - set initial values for vf mailbox
+ *  @hw: pointer to the HW structure
+ *
+ *  Initializes the hw->mbx struct to correct values for vf mailbox
+ */
+s32 e1000_init_mbx_params_vf(struct e1000_hw *hw)
+{
+	struct e1000_mbx_info *mbx = &hw->mbx;
+
+	/* start mailbox as timed out and let the reset_hw call set the timeout
+	 * value to being communications */
+	mbx->timeout = 0;
+	mbx->usec_delay = E1000_VF_MBX_INIT_DELAY;
+
+	mbx->size = E1000_VFMAILBOX_SIZE;
+
+	mbx->ops.read = e1000_read_mbx_vf;
+	mbx->ops.write = e1000_write_mbx_vf;
+	mbx->ops.read_posted = e1000_read_posted_mbx;
+	mbx->ops.write_posted = e1000_write_posted_mbx;
+	mbx->ops.check_for_msg = e1000_check_for_msg_vf;
+	mbx->ops.check_for_ack = e1000_check_for_ack_vf;
+	mbx->ops.check_for_rst = e1000_check_for_rst_vf;
+
+	mbx->stats.msgs_tx = 0;
+	mbx->stats.msgs_rx = 0;
+	mbx->stats.reqs = 0;
+	mbx->stats.acks = 0;
+	mbx->stats.rsts = 0;
+
+	return E1000_SUCCESS;
+}
+