diff options
author | Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> | 2010-05-21 06:07:06 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-05-21 06:07:06 (GMT) |
commit | 119fc60a2d20b63439fdae99f0c7022d3dd99def (patch) | |
tree | 7c6ef480b6beba966db8ff4046f4b8d26586495e /drivers/net/ixgbe | |
parent | 7a9b149212f3716c598afe973b6261fd58453b7a (diff) | |
download | linux-119fc60a2d20b63439fdae99f0c7022d3dd99def.tar.xz |
ixgbe:add support for a new 82599 10G Base-T device
This adds support for a new copper device for 82599, device id 0x151c.
This 82599 10GBase-T device uses the PHY's internal temperature sensor
to guard against over-temp conditions. In this scenario the PHY will be
put in a low power mode and link will no longer be able to transmit or
receive any data. When this occurs, the over-temp interrupt is latched
and driver logs this error message. A HW reset or power cycle is
required to clear this status.
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ixgbe')
-rw-r--r-- | drivers/net/ixgbe/ixgbe.h | 3 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_82598.c | 1 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 1 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 69 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.c | 30 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.h | 3 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 4 |
7 files changed, 111 insertions, 0 deletions
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index d0ea3d6..ffae480 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -360,6 +360,7 @@ struct ixgbe_adapter { u32 flags2; #define IXGBE_FLAG2_RSC_CAPABLE (u32)(1) #define IXGBE_FLAG2_RSC_ENABLED (u32)(1 << 1) +#define IXGBE_FLAG2_TEMP_SENSOR_CAPABLE (u32)(1 << 2) /* default to trying for four seconds */ #define IXGBE_TRY_LINK_TIMEOUT (4 * HZ) @@ -407,6 +408,8 @@ struct ixgbe_adapter { u16 eeprom_version; int node; + struct work_struct check_overtemp_task; + u32 interrupt_event; /* SR-IOV */ DECLARE_BITMAP(active_vfs, IXGBE_MAX_VF_FUNCTIONS); diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index f2b7ff4..9c02d60 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -1236,6 +1236,7 @@ static struct ixgbe_phy_operations phy_ops_82598 = { .setup_link = &ixgbe_setup_phy_link_generic, .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598, + .check_overtemp = &ixgbe_tn_check_overtemp, }; struct ixgbe_info ixgbe_82598_info = { diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index e9706eb..a4e2901 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -2395,6 +2395,7 @@ static struct ixgbe_phy_operations phy_ops_82599 = { .write_i2c_byte = &ixgbe_write_i2c_byte_generic, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, + .check_overtemp = &ixgbe_tn_check_overtemp, }; struct ixgbe_info ixgbe_82599_info = { diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 9551cbb..d571d10 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -108,6 +108,8 @@ static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = { board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_T3_LOM), + board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE), board_82599 }, @@ -1618,6 +1620,48 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector) } } +/** + * ixgbe_check_overtemp_task - worker thread to check over tempurature + * @work: pointer to work_struct containing our data + **/ +static void ixgbe_check_overtemp_task(struct work_struct *work) +{ + struct ixgbe_adapter *adapter = container_of(work, + struct ixgbe_adapter, + check_overtemp_task); + struct ixgbe_hw *hw = &adapter->hw; + u32 eicr = adapter->interrupt_event; + + if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) { + switch (hw->device_id) { + case IXGBE_DEV_ID_82599_T3_LOM: { + u32 autoneg; + bool link_up = false; + + if (hw->mac.ops.check_link) + hw->mac.ops.check_link(hw, &autoneg, &link_up, false); + + if (((eicr & IXGBE_EICR_GPI_SDP0) && (!link_up)) || + (eicr & IXGBE_EICR_LSC)) + /* Check if this is due to overtemp */ + if (hw->phy.ops.check_overtemp(hw) == IXGBE_ERR_OVERTEMP) + break; + } + return; + default: + if (!(eicr & IXGBE_EICR_GPI_SDP0)) + return; + break; + } + DPRINTK(DRV, ERR, "Network adapter has been stopped because it " + "has over heated. Restart the computer. If the problem " + "persists, power off the system and replace the " + "adapter\n"); + /* write to clear the interrupt */ + IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP0); + } +} + static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr) { struct ixgbe_hw *hw = &adapter->hw; @@ -1689,6 +1733,10 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data) if (hw->mac.type == ixgbe_mac_82599EB) { ixgbe_check_sfp_event(adapter, eicr); + adapter->interrupt_event = eicr; + if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) && + ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) + schedule_work(&adapter->check_overtemp_task); /* Handle Flow Director Full threshold interrupt */ if (eicr & IXGBE_EICR_FLOW_DIR) { @@ -2190,6 +2238,8 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) u32 mask; mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE); + if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) + mask |= IXGBE_EIMS_GPI_SDP0; if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) mask |= IXGBE_EIMS_GPI_SDP1; if (adapter->hw.mac.type == ixgbe_mac_82599EB) { @@ -2250,6 +2300,9 @@ static irqreturn_t ixgbe_intr(int irq, void *data) ixgbe_check_sfp_event(adapter, eicr); ixgbe_check_fan_failure(adapter, eicr); + if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) && + ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) + schedule_work(&adapter->check_overtemp_task); if (napi_schedule_prep(&(q_vector->napi))) { adapter->tx_ring[0]->total_packets = 0; @@ -3265,6 +3318,13 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE); } + /* Enable Thermal over heat sensor interrupt */ + if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) { + gpie = IXGBE_READ_REG(hw, IXGBE_GPIE); + gpie |= IXGBE_SDP0_GPIEN; + IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie); + } + /* Enable fan failure interrupt if media type is copper */ if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) { gpie = IXGBE_READ_REG(hw, IXGBE_GPIE); @@ -3666,6 +3726,9 @@ void ixgbe_down(struct ixgbe_adapter *adapter) adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) cancel_work_sync(&adapter->fdir_reinit_task); + if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) + cancel_work_sync(&adapter->check_overtemp_task); + /* disable transmits in the hardware now that interrupts are off */ for (i = 0; i < adapter->num_tx_queues; i++) { j = adapter->tx_ring[i]->reg_idx; @@ -4645,6 +4708,8 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599; adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE; adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; + if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM) + adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; if (dev->features & NETIF_F_NTUPLE) { /* Flow Director perfect filter enabled */ adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE; @@ -6561,7 +6626,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, } /* reset_hw fills in the perm_addr as well */ + hw->phy.reset_if_overtemp = true; err = hw->mac.ops.reset_hw(hw); + hw->phy.reset_if_overtemp = false; if (err == IXGBE_ERR_SFP_NOT_PRESENT && hw->mac.type == ixgbe_mac_82598EB) { /* @@ -6730,6 +6797,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) INIT_WORK(&adapter->fdir_reinit_task, ixgbe_fdir_reinit_task); + if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) + INIT_WORK(&adapter->check_overtemp_task, ixgbe_check_overtemp_task); #ifdef CONFIG_IXGBE_DCA if (dca_add_requester(&pdev->dev) == 0) { adapter->flags |= IXGBE_FLAG_DCA_ENABLED; diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 22d21af..09e1911 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -135,6 +135,11 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) **/ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) { + /* Don't reset PHY if it's shut down due to overtemp. */ + if (!hw->phy.reset_if_overtemp && + (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw))) + return 0; + /* * Perform soft PHY reset to the PHY_XS. * This will cause a soft reset to the PHY @@ -1345,3 +1350,28 @@ s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, return status; } +/** + * ixgbe_tn_check_overtemp - Checks if an overtemp occured. + * @hw: pointer to hardware structure + * + * Checks if the LASI temp alarm status was triggered due to overtemp + **/ +s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) +{ + s32 status = 0; + u16 phy_data = 0; + + if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM) + goto out; + + /* Check that the LASI temp alarm status was triggered */ + hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG, + MDIO_MMD_PMAPMD, &phy_data); + + if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM)) + goto out; + + status = IXGBE_ERR_OVERTEMP; +out: + return status; +} diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h index c9c5459..ef4ba83 100644 --- a/drivers/net/ixgbe/ixgbe_phy.h +++ b/drivers/net/ixgbe/ixgbe_phy.h @@ -80,6 +80,8 @@ #define IXGBE_I2C_T_SU_STO 4 #define IXGBE_I2C_T_BUF 5 +#define IXGBE_TN_LASI_STATUS_REG 0x9005 +#define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008 s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw); s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw); @@ -106,6 +108,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw); s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, u16 *list_offset, u16 *data_offset); +s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw); s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data); s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 39b9be8..2eb6e15 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -51,6 +51,7 @@ #define IXGBE_DEV_ID_82599_KX4 0x10F7 #define IXGBE_DEV_ID_82599_KX4_MEZZ 0x1514 #define IXGBE_DEV_ID_82599_KR 0x1517 +#define IXGBE_DEV_ID_82599_T3_LOM 0x151C #define IXGBE_DEV_ID_82599_CX4 0x10F9 #define IXGBE_DEV_ID_82599_SFP 0x10FB #define IXGBE_DEV_ID_82599_SFP_EM 0x1507 @@ -2470,6 +2471,7 @@ struct ixgbe_phy_operations { s32 (*write_i2c_byte)(struct ixgbe_hw *, u8, u8, u8); s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *); s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8); + s32 (*check_overtemp)(struct ixgbe_hw *); }; struct ixgbe_eeprom_info { @@ -2518,6 +2520,7 @@ struct ixgbe_phy_info { enum ixgbe_smart_speed smart_speed; bool smart_speed_active; bool multispeed_fiber; + bool reset_if_overtemp; }; #include "ixgbe_mbx.h" @@ -2605,6 +2608,7 @@ struct ixgbe_info { #define IXGBE_ERR_FDIR_REINIT_FAILED -23 #define IXGBE_ERR_EEPROM_VERSION -24 #define IXGBE_ERR_NO_SPACE -25 +#define IXGBE_ERR_OVERTEMP -26 #define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF #endif /* _IXGBE_TYPE_H_ */ |