diff options
author | Andy Fleming <afleming@freescale.com> | 2005-08-24 23:46:21 (GMT) |
---|---|---|
committer | Jeff Garzik <jgarzik@pobox.com> | 2005-08-29 00:28:25 (GMT) |
commit | e13934563db047043ccead26412f552375cea90c (patch) | |
tree | 4013ca99f718559447315370c9d5e220e71d99d5 /drivers/net/phy/phy.c | |
parent | 86f0cd505781e42000763821ec6f70127a6abaae (diff) | |
download | linux-e13934563db047043ccead26412f552375cea90c.tar.xz |
[PATCH] PHY Layer fixup
This patch adds back the code that was taken out, thus re-enabling:
* The PHY Layer to initialize without crashing
* Drivers to actually connect to PHYs
* The entire PHY Control Layer
This patch is used by the gianfar driver, and other drivers which are in
development.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Diffstat (limited to 'drivers/net/phy/phy.c')
-rw-r--r-- | drivers/net/phy/phy.c | 325 |
1 files changed, 253 insertions, 72 deletions
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index d3e43631..d9e11f9 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -39,10 +39,20 @@ #include <asm/irq.h> #include <asm/uaccess.h> -static void phy_timer(unsigned long data); -static int phy_disable_interrupts(struct phy_device *phydev); -static void phy_sanitize_settings(struct phy_device *phydev); -static int phy_stop_interrupts(struct phy_device *phydev); +/* Convenience function to print out the current phy status + */ +void phy_print_status(struct phy_device *phydev) +{ + pr_info("%s: Link is %s", phydev->dev.bus_id, + phydev->link ? "Up" : "Down"); + if (phydev->link) + printk(" - %d/%s", phydev->speed, + DUPLEX_FULL == phydev->duplex ? + "Full" : "Half"); + + printk("\n"); +} +EXPORT_SYMBOL(phy_print_status); /* Convenience functions for reading/writing a given PHY @@ -114,42 +124,6 @@ static inline int phy_aneg_done(struct phy_device *phydev) return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE); } -/* phy_start_aneg - * - * description: Calls the PHY driver's config_aneg, and then - * sets the PHY state to PHY_AN if auto-negotiation is enabled, - * and to PHY_FORCING if auto-negotiation is disabled. Unless - * the PHY is currently HALTED. - */ -static int phy_start_aneg(struct phy_device *phydev) -{ - int err; - - spin_lock(&phydev->lock); - - if (AUTONEG_DISABLE == phydev->autoneg) - phy_sanitize_settings(phydev); - - err = phydev->drv->config_aneg(phydev); - - if (err < 0) - goto out_unlock; - - if (phydev->state != PHY_HALTED) { - if (AUTONEG_ENABLE == phydev->autoneg) { - phydev->state = PHY_AN; - phydev->link_timeout = PHY_AN_TIMEOUT; - } else { - phydev->state = PHY_FORCING; - phydev->link_timeout = PHY_FORCE_TIMEOUT; - } - } - -out_unlock: - spin_unlock(&phydev->lock); - return err; -} - /* A structure for mapping a particular speed and duplex * combination to a particular SUPPORTED and ADVERTISED value */ struct phy_setting { @@ -241,7 +215,7 @@ static inline int phy_find_valid(int idx, u32 features) * duplexes. Drop down by one in this order: 1000/FULL, * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF */ -static void phy_sanitize_settings(struct phy_device *phydev) +void phy_sanitize_settings(struct phy_device *phydev) { u32 features = phydev->supported; int idx; @@ -256,31 +230,7 @@ static void phy_sanitize_settings(struct phy_device *phydev) phydev->speed = settings[idx].speed; phydev->duplex = settings[idx].duplex; } - -/* phy_force_reduction - * - * description: Reduces the speed/duplex settings by - * one notch. The order is so: - * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF, - * 10/FULL, 10/HALF. The function bottoms out at 10/HALF. - */ -static void phy_force_reduction(struct phy_device *phydev) -{ - int idx; - - idx = phy_find_setting(phydev->speed, phydev->duplex); - - idx++; - - idx = phy_find_valid(idx, phydev->supported); - - phydev->speed = settings[idx].speed; - phydev->duplex = settings[idx].duplex; - - pr_info("Trying %d/%s\n", phydev->speed, - DUPLEX_FULL == phydev->duplex ? - "FULL" : "HALF"); -} +EXPORT_SYMBOL(phy_sanitize_settings); /* phy_ethtool_sset: * A generic ethtool sset function. Handles all the details @@ -291,6 +241,11 @@ static void phy_force_reduction(struct phy_device *phydev) * - phy_start_aneg() will make sure forced settings are sane, and * choose the next best ones from the ones selected, so we don't * care if ethtool tries to give us bad values + * + * A note about the PHYCONTROL Layer. If you turn off + * CONFIG_PHYCONTROL, you will need to read the PHY status + * registers after this function completes, and update your + * controller manually. */ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd) { @@ -406,6 +361,51 @@ int phy_mii_ioctl(struct phy_device *phydev, return 0; } +/* phy_start_aneg + * + * description: Sanitizes the settings (if we're not + * autonegotiating them), and then calls the driver's + * config_aneg function. If the PHYCONTROL Layer is operating, + * we change the state to reflect the beginning of + * Auto-negotiation or forcing. + */ +int phy_start_aneg(struct phy_device *phydev) +{ + int err; + + spin_lock(&phydev->lock); + + if (AUTONEG_DISABLE == phydev->autoneg) + phy_sanitize_settings(phydev); + + err = phydev->drv->config_aneg(phydev); + +#ifdef CONFIG_PHYCONTROL + if (err < 0) + goto out_unlock; + + if (phydev->state != PHY_HALTED) { + if (AUTONEG_ENABLE == phydev->autoneg) { + phydev->state = PHY_AN; + phydev->link_timeout = PHY_AN_TIMEOUT; + } else { + phydev->state = PHY_FORCING; + phydev->link_timeout = PHY_FORCE_TIMEOUT; + } + } + +out_unlock: +#endif + spin_unlock(&phydev->lock); + return err; +} +EXPORT_SYMBOL(phy_start_aneg); + + +#ifdef CONFIG_PHYCONTROL +static void phy_change(void *data); +static void phy_timer(unsigned long data); + /* phy_start_machine: * * description: The PHY infrastructure can run a state machine @@ -448,6 +448,32 @@ void phy_stop_machine(struct phy_device *phydev) phydev->adjust_state = NULL; } +/* phy_force_reduction + * + * description: Reduces the speed/duplex settings by + * one notch. The order is so: + * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF, + * 10/FULL, 10/HALF. The function bottoms out at 10/HALF. + */ +static void phy_force_reduction(struct phy_device *phydev) +{ + int idx; + + idx = phy_find_setting(phydev->speed, phydev->duplex); + + idx++; + + idx = phy_find_valid(idx, phydev->supported); + + phydev->speed = settings[idx].speed; + phydev->duplex = settings[idx].duplex; + + pr_info("Trying %d/%s\n", phydev->speed, + DUPLEX_FULL == phydev->duplex ? + "FULL" : "HALF"); +} + + /* phy_error: * * Moves the PHY to the HALTED state in response to a read @@ -462,22 +488,44 @@ void phy_error(struct phy_device *phydev) spin_unlock(&phydev->lock); } -static int phy_stop_interrupts(struct phy_device *phydev) +/* phy_interrupt + * + * description: When a PHY interrupt occurs, the handler disables + * interrupts, and schedules a work task to clear the interrupt. + */ +static irqreturn_t phy_interrupt(int irq, void *phy_dat, struct pt_regs *regs) +{ + struct phy_device *phydev = phy_dat; + + /* The MDIO bus is not allowed to be written in interrupt + * context, so we need to disable the irq here. A work + * queue will write the PHY to disable and clear the + * interrupt, and then reenable the irq line. */ + disable_irq_nosync(irq); + + schedule_work(&phydev->phy_queue); + + return IRQ_HANDLED; +} + +/* Enable the interrupts from the PHY side */ +int phy_enable_interrupts(struct phy_device *phydev) { int err; - err = phy_disable_interrupts(phydev); + err = phy_clear_interrupt(phydev); - if (err) - phy_error(phydev); + if (err < 0) + return err; - free_irq(phydev->irq, phydev); + err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); return err; } +EXPORT_SYMBOL(phy_enable_interrupts); /* Disable the PHY interrupts from the PHY side */ -static int phy_disable_interrupts(struct phy_device *phydev) +int phy_disable_interrupts(struct phy_device *phydev) { int err; @@ -500,6 +548,138 @@ phy_err: return err; } +EXPORT_SYMBOL(phy_disable_interrupts); + +/* phy_start_interrupts + * + * description: Request the interrupt for the given PHY. If + * this fails, then we set irq to PHY_POLL. + * Otherwise, we enable the interrupts in the PHY. + * Returns 0 on success. + * This should only be called with a valid IRQ number. + */ +int phy_start_interrupts(struct phy_device *phydev) +{ + int err = 0; + + INIT_WORK(&phydev->phy_queue, phy_change, phydev); + + if (request_irq(phydev->irq, phy_interrupt, + SA_SHIRQ, + "phy_interrupt", + phydev) < 0) { + printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n", + phydev->bus->name, + phydev->irq); + phydev->irq = PHY_POLL; + return 0; + } + + err = phy_enable_interrupts(phydev); + + return err; +} +EXPORT_SYMBOL(phy_start_interrupts); + +int phy_stop_interrupts(struct phy_device *phydev) +{ + int err; + + err = phy_disable_interrupts(phydev); + + if (err) + phy_error(phydev); + + free_irq(phydev->irq, phydev); + + return err; +} +EXPORT_SYMBOL(phy_stop_interrupts); + + +/* Scheduled by the phy_interrupt/timer to handle PHY changes */ +static void phy_change(void *data) +{ + int err; + struct phy_device *phydev = data; + + err = phy_disable_interrupts(phydev); + + if (err) + goto phy_err; + + spin_lock(&phydev->lock); + if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state)) + phydev->state = PHY_CHANGELINK; + spin_unlock(&phydev->lock); + + enable_irq(phydev->irq); + + /* Reenable interrupts */ + err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); + + if (err) + goto irq_enable_err; + + return; + +irq_enable_err: + disable_irq(phydev->irq); +phy_err: + phy_error(phydev); +} + +/* Bring down the PHY link, and stop checking the status. */ +void phy_stop(struct phy_device *phydev) +{ + spin_lock(&phydev->lock); + + if (PHY_HALTED == phydev->state) + goto out_unlock; + + if (phydev->irq != PHY_POLL) { + /* Clear any pending interrupts */ + phy_clear_interrupt(phydev); + + /* Disable PHY Interrupts */ + phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); + } + + phydev->state = PHY_HALTED; + +out_unlock: + spin_unlock(&phydev->lock); +} + + +/* phy_start + * + * description: Indicates the attached device's readiness to + * handle PHY-related work. Used during startup to start the + * PHY, and after a call to phy_stop() to resume operation. + * Also used to indicate the MDIO bus has cleared an error + * condition. + */ +void phy_start(struct phy_device *phydev) +{ + spin_lock(&phydev->lock); + + switch (phydev->state) { + case PHY_STARTING: + phydev->state = PHY_PENDING; + break; + case PHY_READY: + phydev->state = PHY_UP; + break; + case PHY_HALTED: + phydev->state = PHY_RESUMING; + default: + break; + } + spin_unlock(&phydev->lock); +} +EXPORT_SYMBOL(phy_stop); +EXPORT_SYMBOL(phy_start); /* PHY timer which handles the state machine */ static void phy_timer(unsigned long data) @@ -688,3 +868,4 @@ static void phy_timer(unsigned long data) mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ); } +#endif /* CONFIG_PHYCONTROL */ |