Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/usb/qmi_wwan.c

Overlapping additions of new device IDs to qmi_wwan.c

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 31 insertions, 16 deletions

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 84b1fba..d972851 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -814,6 +814,7 @@ void phy_state_machine(struct work_struct *work)
 	bool needs_aneg = false, do_suspend = false;
 	enum phy_state old_state;
 	int err = 0;
+	int old_link;
 
 	mutex_lock(&phydev->lock);
 
@@ -899,11 +900,18 @@ void phy_state_machine(struct work_struct *work)
 		phydev->adjust_link(phydev->attached_dev);
 		break;
 	case PHY_RUNNING:
-		/* Only register a CHANGE if we are
-		 * polling or ignoring interrupts
+		/* Only register a CHANGE if we are polling or ignoring
+		 * interrupts and link changed since latest checking.
 		 */
-		if (!phy_interrupt_is_valid(phydev))
-			phydev->state = PHY_CHANGELINK;
+		if (!phy_interrupt_is_valid(phydev)) {
+			old_link = phydev->link;
+			err = phy_read_status(phydev);
+			if (err)
+				break;
+
+			if (old_link != phydev->link)
+				phydev->state = PHY_CHANGELINK;
+		}
 		break;
 	case PHY_CHANGELINK:
 		err = phy_read_status(phydev);
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index c0f6479e..70b0895 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -91,19 +91,18 @@ static int lan911x_config_init(struct phy_device *phydev)
 }
 
 /*
- * The LAN8710/LAN8720 requires a minimum of 2 link pulses within 64ms of each
- * other in order to set the ENERGYON bit and exit EDPD mode.  If a link partner
- * does send the pulses within this interval, the PHY will remained powered
- * down.
- *
- * This workaround will manually toggle the PHY on/off upon calls to read_status
- * in order to generate link test pulses if the link is down.  If a link partner
- * is present, it will respond to the pulses, which will cause the ENERGYON bit
- * to be set and will cause the EDPD mode to be exited.
+ * The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable
+ * plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to
+ * unstable detection of plugging in Ethernet cable.
+ * This workaround disables Energy Detect Power-Down mode and waiting for
+ * response on link pulses to detect presence of plugged Ethernet cable.
+ * The Energy Detect Power-Down mode is enabled again in the end of procedure to
+ * save approximately 220 mW of power if cable is unplugged.
  */
 static int lan87xx_read_status(struct phy_device *phydev)
 {
 	int err = genphy_read_status(phydev);
+	int i;
 
 	if (!phydev->link) {
 		/* Disable EDPD to wake up PHY */
@@ -116,8 +115,16 @@ static int lan87xx_read_status(struct phy_device *phydev)
 		if (rc < 0)
 			return rc;
 
-		/* Sleep 64 ms to allow ~5 link test pulses to be sent */
-		msleep(64);
+		/* Wait max 640 ms to detect energy */
+		for (i = 0; i < 64; i++) {
+			/* Sleep to allow link test pulses to be sent */
+			msleep(10);
+			rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+			if (rc < 0)
+				return rc;
+			if (rc & MII_LAN83C185_ENERGYON)
+				break;
+		}
 
 		/* Re-enable EDPD */
 		rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
@@ -191,7 +198,7 @@ static struct phy_driver smsc_phy_driver[] = {
 
 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
+	.read_status	= lan87xx_read_status,
 	.config_init	= smsc_phy_config_init,
 	.soft_reset	= smsc_phy_reset,