New driver "sfc" for Solarstorm SFC4000 controller.

The driver supports the 10Xpress PHY and XFP modules on our reference
designs SFE4001 and SFE4002 and the SMC models SMC10GPCIe-XFP and
SMC10GPCIe-10BT.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 252 insertions, 0 deletions

diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
new file mode 100644
index 0000000..11fa9fb
--- /dev/null
+++ b/drivers/net/sfc/sfe4001.c
@@ -0,0 +1,252 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2007 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+/*****************************************************************************
+ * Support for the SFE4001 NIC: driver code for the PCA9539 I/O expander that
+ * controls the PHY power rails, and for the MAX6647 temp. sensor used to check
+ * the PHY
+ */
+#include <linux/delay.h>
+#include "efx.h"
+#include "phy.h"
+#include "boards.h"
+#include "falcon.h"
+#include "falcon_hwdefs.h"
+#include "mac.h"
+
+/**************************************************************************
+ *
+ * I2C IO Expander device
+ *
+ **************************************************************************/
+#define	PCA9539 0x74
+
+#define	P0_IN 0x00
+#define	P0_OUT 0x02
+#define	P0_INVERT 0x04
+#define	P0_CONFIG 0x06
+
+#define	P0_EN_1V0X_LBN 0
+#define	P0_EN_1V0X_WIDTH 1
+#define	P0_EN_1V2_LBN 1
+#define	P0_EN_1V2_WIDTH 1
+#define	P0_EN_2V5_LBN 2
+#define	P0_EN_2V5_WIDTH 1
+#define	P0_EN_3V3X_LBN 3
+#define	P0_EN_3V3X_WIDTH 1
+#define	P0_EN_5V_LBN 4
+#define	P0_EN_5V_WIDTH 1
+#define	P0_SHORTEN_JTAG_LBN 5
+#define	P0_SHORTEN_JTAG_WIDTH 1
+#define	P0_X_TRST_LBN 6
+#define	P0_X_TRST_WIDTH 1
+#define	P0_DSP_RESET_LBN 7
+#define	P0_DSP_RESET_WIDTH 1
+
+#define	P1_IN 0x01
+#define	P1_OUT 0x03
+#define	P1_INVERT 0x05
+#define	P1_CONFIG 0x07
+
+#define	P1_AFE_PWD_LBN 0
+#define	P1_AFE_PWD_WIDTH 1
+#define	P1_DSP_PWD25_LBN 1
+#define	P1_DSP_PWD25_WIDTH 1
+#define	P1_RESERVED_LBN 2
+#define	P1_RESERVED_WIDTH 2
+#define	P1_SPARE_LBN 4
+#define	P1_SPARE_WIDTH 4
+
+
+/**************************************************************************
+ *
+ * Temperature Sensor
+ *
+ **************************************************************************/
+#define	MAX6647	0x4e
+
+#define	RLTS	0x00
+#define	RLTE	0x01
+#define	RSL	0x02
+#define	RCL	0x03
+#define	RCRA	0x04
+#define	RLHN	0x05
+#define	RLLI	0x06
+#define	RRHI	0x07
+#define	RRLS	0x08
+#define	WCRW	0x0a
+#define	WLHO	0x0b
+#define	WRHA	0x0c
+#define	WRLN	0x0e
+#define	OSHT	0x0f
+#define	REET	0x10
+#define	RIET	0x11
+#define	RWOE	0x19
+#define	RWOI	0x20
+#define	HYS	0x21
+#define	QUEUE	0x22
+#define	MFID	0xfe
+#define	REVID	0xff
+
+/* Status bits */
+#define MAX6647_BUSY	(1 << 7)	/* ADC is converting */
+#define MAX6647_LHIGH	(1 << 6)	/* Local high temp. alarm */
+#define MAX6647_LLOW	(1 << 5)	/* Local low temp. alarm */
+#define MAX6647_RHIGH	(1 << 4)	/* Remote high temp. alarm */
+#define MAX6647_RLOW	(1 << 3)	/* Remote low temp. alarm */
+#define MAX6647_FAULT	(1 << 2)	/* DXN/DXP short/open circuit */
+#define MAX6647_EOT	(1 << 1)	/* Remote junction overtemp. */
+#define MAX6647_IOT	(1 << 0)	/* Local junction overtemp. */
+
+static const u8 xgphy_max_temperature = 90;
+
+void sfe4001_poweroff(struct efx_nic *efx)
+{
+	struct efx_i2c_interface *i2c = &efx->i2c;
+
+	u8 cfg, out, in;
+
+	EFX_INFO(efx, "%s\n", __func__);
+
+	/* Turn off all power rails */
+	out = 0xff;
+	(void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+
+	/* Disable port 1 outputs on IO expander */
+	cfg = 0xff;
+	(void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
+
+	/* Disable port 0 outputs on IO expander */
+	cfg = 0xff;
+	(void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
+
+	/* Clear any over-temperature alert */
+	(void) efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
+}
+
+/* This board uses an I2C expander to provider power to the PHY, which needs to
+ * be turned on before the PHY can be used.
+ * Context: Process context, rtnl lock held
+ */
+int sfe4001_poweron(struct efx_nic *efx)
+{
+	struct efx_i2c_interface *i2c = &efx->i2c;
+	unsigned int count;
+	int rc;
+	u8 out, in, cfg;
+	efx_dword_t reg;
+
+	/* 10Xpress has fixed-function LED pins, so there is no board-specific
+	 * blink code. */
+	efx->board_info.blink = tenxpress_phy_blink;
+
+	/* Ensure that XGXS and XAUI SerDes are held in reset */
+	EFX_POPULATE_DWORD_7(reg, XX_PWRDNA_EN, 1,
+			     XX_PWRDNB_EN, 1,
+			     XX_RSTPLLAB_EN, 1,
+			     XX_RESETA_EN, 1,
+			     XX_RESETB_EN, 1,
+			     XX_RSTXGXSRX_EN, 1,
+			     XX_RSTXGXSTX_EN, 1);
+	falcon_xmac_writel(efx, &reg, XX_PWR_RST_REG_MAC);
+	udelay(10);
+
+	/* Set DSP over-temperature alert threshold */
+	EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature);
+	rc = efx_i2c_write(i2c, MAX6647, WLHO,
+			   &xgphy_max_temperature, 1);
+	if (rc)
+		goto fail1;
+
+	/* Read it back and verify */
+	rc = efx_i2c_read(i2c, MAX6647, RLHN, &in, 1);
+	if (rc)
+		goto fail1;
+	if (in != xgphy_max_temperature) {
+		rc = -EFAULT;
+		goto fail1;
+	}
+
+	/* Clear any previous over-temperature alert */
+	rc = efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
+	if (rc)
+		goto fail1;
+
+	/* Enable port 0 and port 1 outputs on IO expander */
+	cfg = 0x00;
+	rc = efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
+	if (rc)
+		goto fail1;
+	cfg = 0xff & ~(1 << P1_SPARE_LBN);
+	rc = efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
+	if (rc)
+		goto fail2;
+
+	/* Turn all power off then wait 1 sec. This ensures PHY is reset */
+	out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) |
+		       (0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) |
+		       (0 << P0_EN_1V0X_LBN));
+	rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+	if (rc)
+		goto fail3;
+
+	schedule_timeout_uninterruptible(HZ);
+	count = 0;
+	do {
+		/* Turn on 1.2V, 2.5V, 3.3V and 5V power rails */
+		out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) |
+			       (1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) |
+			       (1 << P0_X_TRST_LBN));
+
+		rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+		if (rc)
+			goto fail3;
+		msleep(10);
+
+		/* Turn on 1V power rail */
+		out &= ~(1 << P0_EN_1V0X_LBN);
+		rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+		if (rc)
+			goto fail3;
+
+		EFX_INFO(efx, "waiting for power (attempt %d)...\n", count);
+
+		schedule_timeout_uninterruptible(HZ);
+
+		/* Check DSP is powered */
+		rc = efx_i2c_read(i2c, PCA9539, P1_IN, &in, 1);
+		if (rc)
+			goto fail3;
+		if (in & (1 << P1_AFE_PWD_LBN))
+			goto done;
+
+	} while (++count < 20);
+
+	EFX_INFO(efx, "timed out waiting for power\n");
+	rc = -ETIMEDOUT;
+	goto fail3;
+
+done:
+	EFX_INFO(efx, "PHY is powered on\n");
+	return 0;
+
+fail3:
+	/* Turn off all power rails */
+	out = 0xff;
+	(void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+	/* Disable port 1 outputs on IO expander */
+	out = 0xff;
+	(void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
+fail2:
+	/* Disable port 0 outputs on IO expander */
+	out = 0xff;
+	(void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
+fail1:
+	return rc;
+}