diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/sk_mca.c | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/sk_mca.c')
-rw-r--r-- | drivers/net/sk_mca.c | 1217 |
1 files changed, 1217 insertions, 0 deletions
diff --git a/drivers/net/sk_mca.c b/drivers/net/sk_mca.c new file mode 100644 index 0000000..4c56b8d --- /dev/null +++ b/drivers/net/sk_mca.c @@ -0,0 +1,1217 @@ +/* +net-3-driver for the SKNET MCA-based cards + +This is an extension to the Linux operating system, and is covered by the +same GNU General Public License that covers that work. + +Copyright 1999 by Alfred Arnold (alfred@ccac.rwth-aachen.de, + alfred.arnold@lancom.de) + +This driver is based both on the 3C523 driver and the SK_G16 driver. + +paper sources: + 'PC Hardware: Aufbau, Funktionsweise, Programmierung' by + Hans-Peter Messmer for the basic Microchannel stuff + + 'Linux Geraetetreiber' by Allesandro Rubini, Kalle Dalheimer + for help on Ethernet driver programming + + 'Ethernet/IEEE 802.3 Family 1992 World Network Data Book/Handbook' by AMD + for documentation on the AM7990 LANCE + + 'SKNET Personal Technisches Manual', Version 1.2 by Schneider&Koch + for documentation on the Junior board + + 'SK-NET MC2+ Technical Manual", Version 1.1 by Schneider&Koch for + documentation on the MC2 bord + + A big thank you to the S&K support for providing me so quickly with + documentation! + + Also see http://www.syskonnect.com/ + + Missing things: + + -> set debug level via ioctl instead of compile-time switches + -> I didn't follow the development of the 2.1.x kernels, so my + assumptions about which things changed with which kernel version + are probably nonsense + +History: + May 16th, 1999 + startup + May 22st, 1999 + added private structure, methods + begun building data structures in RAM + May 23nd, 1999 + can receive frames, send frames + May 24th, 1999 + modularized initialization of LANCE + loadable as module + still Tx problem :-( + May 26th, 1999 + MC2 works + support for multiple devices + display media type for MC2+ + May 28th, 1999 + fixed problem in GetLANCE leaving interrupts turned off + increase TX queue to 4 packets to improve send performance + May 29th, 1999 + a few corrections in statistics, caught rcvr overruns + reinitialization of LANCE/board in critical situations + MCA info implemented + implemented LANCE multicast filter + Jun 6th, 1999 + additions for Linux 2.2 + Dec 25th, 1999 + unfortunately there seem to be newer MC2+ boards that react + on IRQ 3/5/9/10 instead of 3/5/10/11, so we have to autoprobe + in questionable cases... + Dec 28th, 1999 + integrated patches from David Weinehall & Bill Wendling for 2.3 + kernels (isa_...functions). Things are defined in a way that + it still works with 2.0.x 8-) + Dec 30th, 1999 + added handling of the remaining interrupt conditions. That + should cure the spurious hangs. + Jan 30th, 2000 + newer kernels automatically probe more than one board, so the + 'startslot' as a variable is also needed here + June 1st, 2000 + added changes for recent 2.3 kernels + + *************************************************************************/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/time.h> +#include <linux/mca-legacy.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/bitops.h> + +#include <asm/processor.h> +#include <asm/io.h> + +#define _SK_MCA_DRIVER_ +#include "sk_mca.h" + +/* ------------------------------------------------------------------------ + * global static data - not more since we can handle multiple boards and + * have to pack all state info into the device struct! + * ------------------------------------------------------------------------ */ + +static char *MediaNames[Media_Count] = + { "10Base2", "10BaseT", "10Base5", "Unknown" }; + +static unsigned char poly[] = + { 1, 1, 1, 0, 1, 1, 0, 1, 1, 0, 1, 1, 1, 0, 0, 0, + 1, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 0 +}; + +/* ------------------------------------------------------------------------ + * private subfunctions + * ------------------------------------------------------------------------ */ + +/* dump parts of shared memory - only needed during debugging */ + +#ifdef DEBUG +static void dumpmem(struct net_device *dev, u32 start, u32 len) +{ + skmca_priv *priv = netdev_priv(dev); + int z; + + for (z = 0; z < len; z++) { + if ((z & 15) == 0) + printk("%04x:", z); + printk(" %02x", readb(priv->base + start + z)); + if ((z & 15) == 15) + printk("\n"); + } +} + +/* print exact time - ditto */ + +static void PrTime(void) +{ + struct timeval tv; + + do_gettimeofday(&tv); + printk("%9d:%06d: ", tv.tv_sec, tv.tv_usec); +} +#endif + +/* deduce resources out of POS registers */ + +static void __init getaddrs(int slot, int junior, int *base, int *irq, + skmca_medium * medium) +{ + u_char pos0, pos1, pos2; + + if (junior) { + pos0 = mca_read_stored_pos(slot, 2); + *base = ((pos0 & 0x0e) << 13) + 0xc0000; + *irq = ((pos0 & 0x10) >> 4) + 10; + *medium = Media_Unknown; + } else { + /* reset POS 104 Bits 0+1 so the shared memory region goes to the + configured area between 640K and 1M. Afterwards, enable the MC2. + I really don't know what rode SK to do this... */ + + mca_write_pos(slot, 4, + mca_read_stored_pos(slot, 4) & 0xfc); + mca_write_pos(slot, 2, + mca_read_stored_pos(slot, 2) | 0x01); + + pos1 = mca_read_stored_pos(slot, 3); + pos2 = mca_read_stored_pos(slot, 4); + *base = ((pos1 & 0x07) << 14) + 0xc0000; + switch (pos2 & 0x0c) { + case 0: + *irq = 3; + break; + case 4: + *irq = 5; + break; + case 8: + *irq = -10; + break; + case 12: + *irq = -11; + break; + } + *medium = (pos2 >> 6) & 3; + } +} + +/* check for both cards: + When the MC2 is turned off, it was configured for more than 15MB RAM, + is disabled and won't get detected using the standard probe. We + therefore have to scan the slots manually :-( */ + +static int __init dofind(int *junior, int firstslot) +{ + int slot; + unsigned int id; + + for (slot = firstslot; slot < MCA_MAX_SLOT_NR; slot++) { + id = mca_read_stored_pos(slot, 0) + + (((unsigned int) mca_read_stored_pos(slot, 1)) << 8); + + *junior = 0; + if (id == SKNET_MCA_ID) + return slot; + *junior = 1; + if (id == SKNET_JUNIOR_MCA_ID) + return slot; + } + return MCA_NOTFOUND; +} + +/* reset the whole board */ + +static void ResetBoard(struct net_device *dev) +{ + skmca_priv *priv = netdev_priv(dev); + + writeb(CTRL_RESET_ON, priv->ctrladdr); + udelay(10); + writeb(CTRL_RESET_OFF, priv->ctrladdr); +} + +/* wait for LANCE interface to become not busy */ + +static int WaitLANCE(struct net_device *dev) +{ + skmca_priv *priv = netdev_priv(dev); + int t = 0; + + while ((readb(priv->ctrladdr) & STAT_IO_BUSY) == + STAT_IO_BUSY) { + udelay(1); + if (++t > 1000) { + printk("%s: LANCE access timeout", dev->name); + return 0; + } + } + + return 1; +} + +/* set LANCE register - must be atomic */ + +static void SetLANCE(struct net_device *dev, u16 addr, u16 value) +{ + skmca_priv *priv = netdev_priv(dev); + unsigned long flags; + + /* disable interrupts */ + + spin_lock_irqsave(&priv->lock, flags); + + /* wait until no transfer is pending */ + + WaitLANCE(dev); + + /* transfer register address to RAP */ + + writeb(CTRL_RESET_OFF | CTRL_RW_WRITE | CTRL_ADR_RAP, priv->ctrladdr); + writew(addr, priv->ioregaddr); + writeb(IOCMD_GO, priv->cmdaddr); + udelay(1); + WaitLANCE(dev); + + /* transfer data to register */ + + writeb(CTRL_RESET_OFF | CTRL_RW_WRITE | CTRL_ADR_DATA, priv->ctrladdr); + writew(value, priv->ioregaddr); + writeb(IOCMD_GO, priv->cmdaddr); + udelay(1); + WaitLANCE(dev); + + /* reenable interrupts */ + + spin_unlock_irqrestore(&priv->lock, flags); +} + +/* get LANCE register */ + +static u16 GetLANCE(struct net_device *dev, u16 addr) +{ + skmca_priv *priv = netdev_priv(dev); + unsigned long flags; + unsigned int res; + + /* disable interrupts */ + + spin_lock_irqsave(&priv->lock, flags); + + /* wait until no transfer is pending */ + + WaitLANCE(dev); + + /* transfer register address to RAP */ + + writeb(CTRL_RESET_OFF | CTRL_RW_WRITE | CTRL_ADR_RAP, priv->ctrladdr); + writew(addr, priv->ioregaddr); + writeb(IOCMD_GO, priv->cmdaddr); + udelay(1); + WaitLANCE(dev); + + /* transfer data from register */ + + writeb(CTRL_RESET_OFF | CTRL_RW_READ | CTRL_ADR_DATA, priv->ctrladdr); + writeb(IOCMD_GO, priv->cmdaddr); + udelay(1); + WaitLANCE(dev); + res = readw(priv->ioregaddr); + + /* reenable interrupts */ + + spin_unlock_irqrestore(&priv->lock, flags); + + return res; +} + +/* build up descriptors in shared RAM */ + +static void InitDscrs(struct net_device *dev) +{ + skmca_priv *priv = netdev_priv(dev); + u32 bufaddr; + + /* Set up Tx descriptors. The board has only 16K RAM so bits 16..23 + are always 0. */ + + bufaddr = RAM_DATABASE; + { + LANCE_TxDescr descr; + int z; + + for (z = 0; z < TXCOUNT; z++) { + descr.LowAddr = bufaddr; + descr.Flags = 0; + descr.Len = 0xf000; + descr.Status = 0; + memcpy_toio(priv->base + RAM_TXBASE + + (z * sizeof(LANCE_TxDescr)), &descr, + sizeof(LANCE_TxDescr)); + memset_io(priv->base + bufaddr, 0, RAM_BUFSIZE); + bufaddr += RAM_BUFSIZE; + } + } + + /* do the same for the Rx descriptors */ + + { + LANCE_RxDescr descr; + int z; + + for (z = 0; z < RXCOUNT; z++) { + descr.LowAddr = bufaddr; + descr.Flags = RXDSCR_FLAGS_OWN; + descr.MaxLen = -RAM_BUFSIZE; + descr.Len = 0; + memcpy_toio(priv->base + RAM_RXBASE + + (z * sizeof(LANCE_RxDescr)), &descr, + sizeof(LANCE_RxDescr)); + memset_io(priv->base + bufaddr, 0, RAM_BUFSIZE); + bufaddr += RAM_BUFSIZE; + } + } +} + +/* calculate the hash bit position for a given multicast address + taken more or less directly from the AMD datasheet... */ + +static void UpdateCRC(unsigned char *CRC, int bit) +{ + int j; + + /* shift CRC one bit */ + + memmove(CRC + 1, CRC, 32 * sizeof(unsigned char)); + CRC[0] = 0; + + /* if bit XOR controlbit = 1, set CRC = CRC XOR polynomial */ + + if (bit ^ CRC[32]) + for (j = 0; j < 32; j++) + CRC[j] ^= poly[j]; +} + +static unsigned int GetHash(char *address) +{ + unsigned char CRC[33]; + int i, byte, hashcode; + + /* a multicast address has bit 0 in the first byte set */ + + if ((address[0] & 1) == 0) + return -1; + + /* initialize CRC */ + + memset(CRC, 1, sizeof(CRC)); + + /* loop through address bits */ + + for (byte = 0; byte < 6; byte++) + for (i = 0; i < 8; i++) + UpdateCRC(CRC, (address[byte] >> i) & 1); + + /* hashcode is the 6 least significant bits of the CRC */ + + hashcode = 0; + for (i = 0; i < 6; i++) + hashcode = (hashcode << 1) + CRC[i]; + return hashcode; +} + +/* feed ready-built initialization block into LANCE */ + +static void InitLANCE(struct net_device *dev) +{ + skmca_priv *priv = netdev_priv(dev); + + /* build up descriptors. */ + + InitDscrs(dev); + + /* next RX descriptor to be read is the first one. Since the LANCE + will start from the beginning after initialization, we have to + reset out pointers too. */ + + priv->nextrx = 0; + + /* no TX descriptors active */ + + priv->nexttxput = priv->nexttxdone = priv->txbusy = 0; + + /* set up the LANCE bus control register - constant for SKnet boards */ + + SetLANCE(dev, LANCE_CSR3, + CSR3_BSWAP_OFF | CSR3_ALE_LOW | CSR3_BCON_HOLD); + + /* write address of initialization block into LANCE */ + + SetLANCE(dev, LANCE_CSR1, RAM_INITBASE & 0xffff); + SetLANCE(dev, LANCE_CSR2, (RAM_INITBASE >> 16) & 0xff); + + /* we don't get ready until the LANCE has read the init block */ + + netif_stop_queue(dev); + + /* let LANCE read the initialization block. LANCE is ready + when we receive the corresponding interrupt. */ + + SetLANCE(dev, LANCE_CSR0, CSR0_INEA | CSR0_INIT); +} + +/* stop the LANCE so we can reinitialize it */ + +static void StopLANCE(struct net_device *dev) +{ + /* can't take frames any more */ + + netif_stop_queue(dev); + + /* disable interrupts, stop it */ + + SetLANCE(dev, LANCE_CSR0, CSR0_STOP); +} + +/* initialize card and LANCE for proper operation */ + +static void InitBoard(struct net_device *dev) +{ + skmca_priv *priv = netdev_priv(dev); + LANCE_InitBlock block; + + /* Lay out the shared RAM - first we create the init block for the LANCE. + We do not overwrite it later because we need it again when we switch + promiscous mode on/off. */ + + block.Mode = 0; + if (dev->flags & IFF_PROMISC) + block.Mode |= LANCE_INIT_PROM; + memcpy(block.PAdr, dev->dev_addr, 6); + memset(block.LAdrF, 0, sizeof(block.LAdrF)); + block.RdrP = (RAM_RXBASE & 0xffffff) | (LRXCOUNT << 29); + block.TdrP = (RAM_TXBASE & 0xffffff) | (LTXCOUNT << 29); + + memcpy_toio(priv->base + RAM_INITBASE, &block, sizeof(block)); + + /* initialize LANCE. Implicitly sets up other structures in RAM. */ + + InitLANCE(dev); +} + +/* deinitialize card and LANCE */ + +static void DeinitBoard(struct net_device *dev) +{ + /* stop LANCE */ + + StopLANCE(dev); + + /* reset board */ + + ResetBoard(dev); +} + +/* probe for device's irq */ + +static int __init ProbeIRQ(struct net_device *dev) +{ + unsigned long imaskval, njiffies, irq; + u16 csr0val; + + /* enable all interrupts */ + + imaskval = probe_irq_on(); + + /* initialize the board. Wait for interrupt 'Initialization done'. */ + + ResetBoard(dev); + InitBoard(dev); + + njiffies = jiffies + HZ; + do { + csr0val = GetLANCE(dev, LANCE_CSR0); + } + while (((csr0val & CSR0_IDON) == 0) && (jiffies != njiffies)); + + /* turn of interrupts again */ + + irq = probe_irq_off(imaskval); + + /* if we found something, ack the interrupt */ + + if (irq) + SetLANCE(dev, LANCE_CSR0, csr0val | CSR0_IDON); + + /* back to idle state */ + + DeinitBoard(dev); + + return irq; +} + +/* ------------------------------------------------------------------------ + * interrupt handler(s) + * ------------------------------------------------------------------------ */ + +/* LANCE has read initialization block -> start it */ + +static u16 irqstart_handler(struct net_device *dev, u16 oldcsr0) +{ + /* now we're ready to transmit */ + + netif_wake_queue(dev); + + /* reset IDON bit, start LANCE */ + + SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_IDON | CSR0_STRT); + return GetLANCE(dev, LANCE_CSR0); +} + +/* did we lose blocks due to a FIFO overrun ? */ + +static u16 irqmiss_handler(struct net_device *dev, u16 oldcsr0) +{ + skmca_priv *priv = netdev_priv(dev); + + /* update statistics */ + + priv->stat.rx_fifo_errors++; + + /* reset MISS bit */ + + SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_MISS); + return GetLANCE(dev, LANCE_CSR0); +} + +/* receive interrupt */ + +static u16 irqrx_handler(struct net_device *dev, u16 oldcsr0) +{ + skmca_priv *priv = netdev_priv(dev); + LANCE_RxDescr descr; + unsigned int descraddr; + + /* run through queue until we reach a descriptor we do not own */ + + descraddr = RAM_RXBASE + (priv->nextrx * sizeof(LANCE_RxDescr)); + while (1) { + /* read descriptor */ + memcpy_fromio(&descr, priv->base + descraddr, + sizeof(LANCE_RxDescr)); + + /* if we reach a descriptor we do not own, we're done */ + if ((descr.Flags & RXDSCR_FLAGS_OWN) != 0) + break; + +#ifdef DEBUG + PrTime(); + printk("Receive packet on descr %d len %d\n", priv->nextrx, + descr.Len); +#endif + + /* erroneous packet ? */ + if ((descr.Flags & RXDSCR_FLAGS_ERR) != 0) { + priv->stat.rx_errors++; + if ((descr.Flags & RXDSCR_FLAGS_CRC) != 0) + priv->stat.rx_crc_errors++; + else if ((descr.Flags & RXDSCR_FLAGS_CRC) != 0) + priv->stat.rx_frame_errors++; + else if ((descr.Flags & RXDSCR_FLAGS_OFLO) != 0) + priv->stat.rx_fifo_errors++; + } + + /* good packet ? */ + else { + struct sk_buff *skb; + + skb = dev_alloc_skb(descr.Len + 2); + if (skb == NULL) + priv->stat.rx_dropped++; + else { + memcpy_fromio(skb_put(skb, descr.Len), + priv->base + + descr.LowAddr, descr.Len); + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_NONE; + priv->stat.rx_packets++; + priv->stat.rx_bytes += descr.Len; + netif_rx(skb); + dev->last_rx = jiffies; + } + } + + /* give descriptor back to LANCE */ + descr.Len = 0; + descr.Flags |= RXDSCR_FLAGS_OWN; + + /* update descriptor in shared RAM */ + memcpy_toio(priv->base + descraddr, &descr, + sizeof(LANCE_RxDescr)); + + /* go to next descriptor */ + priv->nextrx++; + descraddr += sizeof(LANCE_RxDescr); + if (priv->nextrx >= RXCOUNT) { + priv->nextrx = 0; + descraddr = RAM_RXBASE; + } + } + + /* reset RINT bit */ + + SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_RINT); + return GetLANCE(dev, LANCE_CSR0); +} + +/* transmit interrupt */ + +static u16 irqtx_handler(struct net_device *dev, u16 oldcsr0) +{ + skmca_priv *priv = netdev_priv(dev); + LANCE_TxDescr descr; + unsigned int descraddr; + + /* check descriptors at most until no busy one is left */ + + descraddr = + RAM_TXBASE + (priv->nexttxdone * sizeof(LANCE_TxDescr)); + while (priv->txbusy > 0) { + /* read descriptor */ + memcpy_fromio(&descr, priv->base + descraddr, + sizeof(LANCE_TxDescr)); + + /* if the LANCE still owns this one, we've worked out all sent packets */ + if ((descr.Flags & TXDSCR_FLAGS_OWN) != 0) + break; + +#ifdef DEBUG + PrTime(); + printk("Send packet done on descr %d\n", priv->nexttxdone); +#endif + + /* update statistics */ + if ((descr.Flags & TXDSCR_FLAGS_ERR) == 0) { + priv->stat.tx_packets++; + priv->stat.tx_bytes++; + } else { + priv->stat.tx_errors++; + if ((descr.Status & TXDSCR_STATUS_UFLO) != 0) { + priv->stat.tx_fifo_errors++; + InitLANCE(dev); + } + else + if ((descr.Status & TXDSCR_STATUS_LCOL) != + 0) priv->stat.tx_window_errors++; + else if ((descr.Status & TXDSCR_STATUS_LCAR) != 0) + priv->stat.tx_carrier_errors++; + else if ((descr.Status & TXDSCR_STATUS_RTRY) != 0) + priv->stat.tx_aborted_errors++; + } + + /* go to next descriptor */ + priv->nexttxdone++; + descraddr += sizeof(LANCE_TxDescr); + if (priv->nexttxdone >= TXCOUNT) { + priv->nexttxdone = 0; + descraddr = RAM_TXBASE; + } + priv->txbusy--; + } + + /* reset TX interrupt bit */ + + SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_TINT); + oldcsr0 = GetLANCE(dev, LANCE_CSR0); + + /* at least one descriptor is freed. Therefore we can accept + a new one */ + /* inform upper layers we're in business again */ + + netif_wake_queue(dev); + + return oldcsr0; +} + +/* general interrupt entry */ + +static irqreturn_t irq_handler(int irq, void *device, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *) device; + u16 csr0val; + + /* read CSR0 to get interrupt cause */ + + csr0val = GetLANCE(dev, LANCE_CSR0); + + /* in case we're not meant... */ + + if ((csr0val & CSR0_INTR) == 0) + return IRQ_NONE; + +#if 0 + set_bit(LINK_STATE_RXSEM, &dev->state); +#endif + + /* loop through the interrupt bits until everything is clear */ + + do { + if ((csr0val & CSR0_IDON) != 0) + csr0val = irqstart_handler(dev, csr0val); + if ((csr0val & CSR0_RINT) != 0) + csr0val = irqrx_handler(dev, csr0val); + if ((csr0val & CSR0_MISS) != 0) + csr0val = irqmiss_handler(dev, csr0val); + if ((csr0val & CSR0_TINT) != 0) + csr0val = irqtx_handler(dev, csr0val); + if ((csr0val & CSR0_MERR) != 0) { + SetLANCE(dev, LANCE_CSR0, csr0val | CSR0_MERR); + csr0val = GetLANCE(dev, LANCE_CSR0); + } + if ((csr0val & CSR0_BABL) != 0) { + SetLANCE(dev, LANCE_CSR0, csr0val | CSR0_BABL); + csr0val = GetLANCE(dev, LANCE_CSR0); + } + } + while ((csr0val & CSR0_INTR) != 0); + +#if 0 + clear_bit(LINK_STATE_RXSEM, &dev->state); +#endif + return IRQ_HANDLED; +} + +/* ------------------------------------------------------------------------ + * driver methods + * ------------------------------------------------------------------------ */ + +/* MCA info */ + +static int skmca_getinfo(char *buf, int slot, void *d) +{ + int len = 0, i; + struct net_device *dev = (struct net_device *) d; + skmca_priv *priv; + + /* can't say anything about an uninitialized device... */ + + if (dev == NULL) + return len; + priv = netdev_priv(dev); + + /* print info */ + + len += sprintf(buf + len, "IRQ: %d\n", priv->realirq); + len += sprintf(buf + len, "Memory: %#lx-%#lx\n", dev->mem_start, + dev->mem_end - 1); + len += + sprintf(buf + len, "Transceiver: %s\n", + MediaNames[priv->medium]); + len += sprintf(buf + len, "Device: %s\n", dev->name); + len += sprintf(buf + len, "MAC address:"); + for (i = 0; i < 6; i++) + len += sprintf(buf + len, " %02x", dev->dev_addr[i]); + buf[len++] = '\n'; + buf[len] = 0; + + return len; +} + +/* open driver. Means also initialization and start of LANCE */ + +static int skmca_open(struct net_device *dev) +{ + int result; + skmca_priv *priv = netdev_priv(dev); + + /* register resources - only necessary for IRQ */ + result = + request_irq(priv->realirq, irq_handler, + SA_SHIRQ | SA_SAMPLE_RANDOM, "sk_mca", dev); + if (result != 0) { + printk("%s: failed to register irq %d\n", dev->name, + dev->irq); + return result; + } + dev->irq = priv->realirq; + + /* set up the card and LANCE */ + + InitBoard(dev); + + /* set up flags */ + + netif_start_queue(dev); + + return 0; +} + +/* close driver. Shut down board and free allocated resources */ + +static int skmca_close(struct net_device *dev) +{ + /* turn off board */ + DeinitBoard(dev); + + /* release resources */ + if (dev->irq != 0) + free_irq(dev->irq, dev); + dev->irq = 0; + + return 0; +} + +/* transmit a block. */ + +static int skmca_tx(struct sk_buff *skb, struct net_device *dev) +{ + skmca_priv *priv = netdev_priv(dev); + LANCE_TxDescr descr; + unsigned int address; + int tmplen, retval = 0; + unsigned long flags; + + /* if we get called with a NULL descriptor, the Ethernet layer thinks + our card is stuck an we should reset it. We'll do this completely: */ + + if (skb == NULL) { + DeinitBoard(dev); + InitBoard(dev); + return 0; /* don't try to free the block here ;-) */ + } + + /* is there space in the Tx queue ? If no, the upper layer gave us a + packet in spite of us not being ready and is really in trouble. + We'll do the dropping for him: */ + if (priv->txbusy >= TXCOUNT) { + priv->stat.tx_dropped++; + retval = -EIO; + goto tx_done; + } + + /* get TX descriptor */ + address = RAM_TXBASE + (priv->nexttxput * sizeof(LANCE_TxDescr)); + memcpy_fromio(&descr, priv->base + address, sizeof(LANCE_TxDescr)); + + /* enter packet length as 2s complement - assure minimum length */ + tmplen = skb->len; + if (tmplen < 60) + tmplen = 60; + descr.Len = 65536 - tmplen; + + /* copy filler into RAM - in case we're filling up... + we're filling a bit more than necessary, but that doesn't harm + since the buffer is far larger... */ + if (tmplen > skb->len) { + char *fill = "NetBSD is a nice OS too! "; + unsigned int destoffs = 0, l = strlen(fill); + + while (destoffs < tmplen) { + memcpy_toio(priv->base + descr.LowAddr + + destoffs, fill, l); + destoffs += l; + } + } + + /* do the real data copying */ + memcpy_toio(priv->base + descr.LowAddr, skb->data, skb->len); + + /* hand descriptor over to LANCE - this is the first and last chunk */ + descr.Flags = + TXDSCR_FLAGS_OWN | TXDSCR_FLAGS_STP | TXDSCR_FLAGS_ENP; + +#ifdef DEBUG + PrTime(); + printk("Send packet on descr %d len %d\n", priv->nexttxput, + skb->len); +#endif + + /* one more descriptor busy */ + + spin_lock_irqsave(&priv->lock, flags); + + priv->nexttxput++; + if (priv->nexttxput >= TXCOUNT) + priv->nexttxput = 0; + priv->txbusy++; + + /* are we saturated ? */ + + if (priv->txbusy >= TXCOUNT) + netif_stop_queue(dev); + + /* write descriptor back to RAM */ + memcpy_toio(priv->base + address, &descr, sizeof(LANCE_TxDescr)); + + /* if no descriptors were active, give the LANCE a hint to read it + immediately */ + + if (priv->txbusy == 0) + SetLANCE(dev, LANCE_CSR0, CSR0_INEA | CSR0_TDMD); + + spin_unlock_irqrestore(&priv->lock, flags); + + tx_done: + + dev_kfree_skb(skb); + + return retval; +} + +/* return pointer to Ethernet statistics */ + +static struct net_device_stats *skmca_stats(struct net_device *dev) +{ + skmca_priv *priv = netdev_priv(dev); + + return &(priv->stat); +} + +/* switch receiver mode. We use the LANCE's multicast filter to prefilter + multicast addresses. */ + +static void skmca_set_multicast_list(struct net_device *dev) +{ + skmca_priv *priv = netdev_priv(dev); + LANCE_InitBlock block; + + /* first stop the LANCE... */ + StopLANCE(dev); + + /* ...then modify the initialization block... */ + memcpy_fromio(&block, priv->base + RAM_INITBASE, sizeof(block)); + if (dev->flags & IFF_PROMISC) + block.Mode |= LANCE_INIT_PROM; + else + block.Mode &= ~LANCE_INIT_PROM; + + if (dev->flags & IFF_ALLMULTI) { /* get all multicasts */ + memset(block.LAdrF, 0xff, sizeof(block.LAdrF)); + } else { /* get selected/no multicasts */ + + struct dev_mc_list *mptr; + int code; + + memset(block.LAdrF, 0, sizeof(block.LAdrF)); + for (mptr = dev->mc_list; mptr != NULL; mptr = mptr->next) { + code = GetHash(mptr->dmi_addr); + block.LAdrF[(code >> 3) & 7] |= 1 << (code & 7); + } + } + + memcpy_toio(priv->base + RAM_INITBASE, &block, sizeof(block)); + + /* ...then reinit LANCE with the correct flags */ + InitLANCE(dev); +} + +/* ------------------------------------------------------------------------ + * hardware check + * ------------------------------------------------------------------------ */ + +static int startslot; /* counts through slots when probing multiple devices */ + +static void cleanup_card(struct net_device *dev) +{ + skmca_priv *priv = netdev_priv(dev); + DeinitBoard(dev); + if (dev->irq != 0) + free_irq(dev->irq, dev); + iounmap(priv->base); + mca_mark_as_unused(priv->slot); + mca_set_adapter_procfn(priv->slot, NULL, NULL); +} + +struct net_device * __init skmca_probe(int unit) +{ + struct net_device *dev; + int force_detect = 0; + int junior, slot, i; + int base = 0, irq = 0; + skmca_priv *priv; + skmca_medium medium; + int err; + + /* can't work without an MCA bus ;-) */ + + if (MCA_bus == 0) + return ERR_PTR(-ENODEV); + + dev = alloc_etherdev(sizeof(skmca_priv)); + if (!dev) + return ERR_PTR(-ENOMEM); + + if (unit >= 0) { + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + } + + SET_MODULE_OWNER(dev); + + /* start address of 1 --> forced detection */ + + if (dev->mem_start == 1) + force_detect = 1; + + /* search through slots */ + + base = dev->mem_start; + irq = dev->base_addr; + for (slot = startslot; (slot = dofind(&junior, slot)) != -1; slot++) { + /* deduce card addresses */ + + getaddrs(slot, junior, &base, &irq, &medium); + + /* slot already in use ? */ + + if (mca_is_adapter_used(slot)) + continue; + + /* were we looking for something different ? */ + + if (dev->irq && dev->irq != irq) + continue; + if (dev->mem_start && dev->mem_start != base) + continue; + + /* found something that matches */ + + break; + } + + /* nothing found ? */ + + if (slot == -1) { + free_netdev(dev); + return (base || irq) ? ERR_PTR(-ENXIO) : ERR_PTR(-ENODEV); + } + + /* make procfs entries */ + + if (junior) + mca_set_adapter_name(slot, + "SKNET junior MC2 Ethernet Adapter"); + else + mca_set_adapter_name(slot, "SKNET MC2+ Ethernet Adapter"); + mca_set_adapter_procfn(slot, (MCA_ProcFn) skmca_getinfo, dev); + + mca_mark_as_used(slot); + + /* announce success */ + printk("%s: SKNet %s adapter found in slot %d\n", dev->name, + junior ? "Junior MC2" : "MC2+", slot + 1); + + priv = netdev_priv(dev); + priv->base = ioremap(base, 0x4000); + if (!priv->base) { + mca_set_adapter_procfn(slot, NULL, NULL); + mca_mark_as_unused(slot); + free_netdev(dev); + return ERR_PTR(-ENOMEM); + } + + priv->slot = slot; + priv->macbase = priv->base + 0x3fc0; + priv->ioregaddr = priv->base + 0x3ff0; + priv->ctrladdr = priv->base + 0x3ff2; + priv->cmdaddr = priv->base + 0x3ff3; + priv->medium = medium; + memset(&priv->stat, 0, sizeof(struct net_device_stats)); + spin_lock_init(&priv->lock); + + /* set base + irq for this device (irq not allocated so far) */ + dev->irq = 0; + dev->mem_start = base; + dev->mem_end = base + 0x4000; + + /* autoprobe ? */ + if (irq < 0) { + int nirq; + + printk + ("%s: ambigous POS bit combination, must probe for IRQ...\n", + dev->name); + nirq = ProbeIRQ(dev); + if (nirq <= 0) + printk("%s: IRQ probe failed, assuming IRQ %d", + dev->name, priv->realirq = -irq); + else + priv->realirq = nirq; + } else + priv->realirq = irq; + + /* set methods */ + dev->open = skmca_open; + dev->stop = skmca_close; + dev->hard_start_xmit = skmca_tx; + dev->do_ioctl = NULL; + dev->get_stats = skmca_stats; + dev->set_multicast_list = skmca_set_multicast_list; + dev->flags |= IFF_MULTICAST; + + /* copy out MAC address */ + for (i = 0; i < 6; i++) + dev->dev_addr[i] = readb(priv->macbase + (i << 1)); + + /* print config */ + printk("%s: IRQ %d, memory %#lx-%#lx, " + "MAC address %02x:%02x:%02x:%02x:%02x:%02x.\n", + dev->name, priv->realirq, dev->mem_start, dev->mem_end - 1, + dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], + dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); + printk("%s: %s medium\n", dev->name, MediaNames[priv->medium]); + + /* reset board */ + + ResetBoard(dev); + + startslot = slot + 1; + + err = register_netdev(dev); + if (err) { + cleanup_card(dev); + free_netdev(dev); + dev = ERR_PTR(err); + } + return dev; +} + +/* ------------------------------------------------------------------------ + * modularization support + * ------------------------------------------------------------------------ */ + +#ifdef MODULE +MODULE_LICENSE("GPL"); + +#define DEVMAX 5 + +static struct net_device *moddevs[DEVMAX]; + +int init_module(void) +{ + int z; + + startslot = 0; + for (z = 0; z < DEVMAX; z++) { + struct net_device *dev = skmca_probe(-1); + if (IS_ERR(dev)) + break; + moddevs[z] = dev; + } + if (!z) + return -EIO; + return 0; +} + +void cleanup_module(void) +{ + int z; + + for (z = 0; z < DEVMAX; z++) { + struct net_device *dev = moddevs[z]; + if (dev) { + unregister_netdev(dev); + cleanup_card(dev); + free_netdev(dev); + } + } +} +#endif /* MODULE */ |