diff options
author | Matt Carlson <mcarlson@broadcom.com> | 2009-08-25 10:07:27 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2009-08-26 22:47:47 (GMT) |
commit | 255ca311b650caece3ec4f78b88ef298664d561f (patch) | |
tree | cf26fdfb0fb9f5fba78bb59a82f37abb132d4b62 /drivers/net/tg3.c | |
parent | 521e6b90dd3f0392062845d7ef13e6e41bb99d8a (diff) | |
download | linux-255ca311b650caece3ec4f78b88ef298664d561f.tar.xz |
tg3: Prevent tx BD corruption
This patch prevents a tx BD corruption bug by preventing the device from
powering down the PLL from L1 if the link speed is 10Mbps or 100Mbps.
The same bits are also used to prevent a system hang during chip reset
resulting from a complicated set of events that ultimately leads to
PCIe block register corruption.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/tg3.c')
-rw-r--r-- | drivers/net/tg3.c | 28 |
1 files changed, 28 insertions, 0 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index e8def28..595ddf2 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3167,6 +3167,15 @@ relink: pci_write_config_word(tp->pdev, tp->pcie_cap + PCI_EXP_LNKCTL, newlnkctl); + } else if (tp->tg3_flags3 & TG3_FLG3_TOGGLE_10_100_L1PLLPD) { + u32 newreg, oldreg = tr32(TG3_PCIE_LNKCTL); + if (tp->link_config.active_speed == SPEED_100 || + tp->link_config.active_speed == SPEED_10) + newreg = oldreg & ~TG3_PCIE_LNKCTL_L1_PLL_PD_EN; + else + newreg = oldreg | TG3_PCIE_LNKCTL_L1_PLL_PD_EN; + if (newreg != oldreg) + tw32(TG3_PCIE_LNKCTL, newreg); } if (current_link_up != netif_carrier_ok(tp->dev)) { @@ -6160,6 +6169,11 @@ static int tg3_chip_reset(struct tg3 *tp) smp_mb(); synchronize_irq(tp->pdev->irq); + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) { + val = tr32(TG3_PCIE_LNKCTL) & ~TG3_PCIE_LNKCTL_L1_PLL_PD_EN; + tw32(TG3_PCIE_LNKCTL, val | TG3_PCIE_LNKCTL_L1_PLL_PD_DIS); + } + /* do the reset */ val = GRC_MISC_CFG_CORECLK_RESET; @@ -6726,6 +6740,15 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tw32(TG3_CORR_ERR_STAT, TG3_CORR_ERR_STAT_CLEAR); } + if (tp->tg3_flags3 & TG3_FLG3_TOGGLE_10_100_L1PLLPD) { + val = tr32(TG3_PCIE_LNKCTL); + if (tp->tg3_flags3 & TG3_FLG3_CLKREQ_BUG) + val |= TG3_PCIE_LNKCTL_L1_PLL_PD_DIS; + else + val &= ~TG3_PCIE_LNKCTL_L1_PLL_PD_DIS; + tw32(TG3_PCIE_LNKCTL, val); + } + /* This works around an issue with Athlon chipsets on * B3 tigon3 silicon. This bit has no effect on any * other revision. But do not set this on PCI Express @@ -12274,6 +12297,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) tp->tg3_flags3 |= TG3_FLG3_USE_PHYLIB; + if ((tp->pci_chip_rev_id == CHIPREV_ID_57780_A1 && + tr32(RCVLPC_STATS_ENABLE) & RCVLPC_STATSENAB_ASF_FIX) || + tp->pci_chip_rev_id == CHIPREV_ID_57780_A0) + tp->tg3_flags3 |= TG3_FLG3_TOGGLE_10_100_L1PLLPD; + err = tg3_mdio_init(tp); if (err) return err; |