summaryrefslogtreecommitdiff
path: root/drivers/net/ucc_geth.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2009-06-18 21:07:15 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2009-06-18 21:07:15 (GMT)
commitd2aa4550379f92e929af7ed1dd4f55e6a1e331f8 (patch)
tree5ef0fc69a507f0d701fd157b6652427eabd5efdd /drivers/net/ucc_geth.c
parent9e3e4b1d2d13bead8d52703c82a02b55f108b491 (diff)
parentcb2107be43d2fc5eadec58b92b54bf32c00bfff3 (diff)
downloadlinux-d2aa4550379f92e929af7ed1dd4f55e6a1e331f8.tar.xz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (55 commits) netxen: fix tx ring accounting netxen: fix detection of cut-thru firmware mode forcedeth: fix dma api mismatches atm: sk_wmem_alloc initial value is one net: correct off-by-one write allocations reports via-velocity : fix no link detection on boot Net / e100: Fix suspend of devices that cannot be power managed TI DaVinci EMAC : Fix rmmod error net: group address list and its count ipv4: Fix fib_trie rebalancing, part 2 pkt_sched: Update drops stats in act_police sky2: version 1.23 sky2: add GRO support sky2: skb recycling sky2: reduce default transmit ring sky2: receive counter update sky2: fix shutdown synchronization sky2: PCI irq issues sky2: more receive shutdown sky2: turn off pause during shutdown ... Manually fix trivial conflict in net/core/skbuff.c due to kmemcheck
Diffstat (limited to 'drivers/net/ucc_geth.c')
-rw-r--r--drivers/net/ucc_geth.c113
1 files changed, 46 insertions, 67 deletions
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index e2f2e91..40c6eba 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -65,8 +65,6 @@
static DEFINE_SPINLOCK(ugeth_lock);
-static void uec_configure_serdes(struct net_device *dev);
-
static struct {
u32 msg_enable;
} debug = { -1 };
@@ -1536,6 +1534,49 @@ static void adjust_link(struct net_device *dev)
spin_unlock_irqrestore(&ugeth->lock, flags);
}
+/* Initialize TBI PHY interface for communicating with the
+ * SERDES lynx PHY on the chip. We communicate with this PHY
+ * through the MDIO bus on each controller, treating it as a
+ * "normal" PHY at the address found in the UTBIPA register. We assume
+ * that the UTBIPA register is valid. Either the MDIO bus code will set
+ * it to a value that doesn't conflict with other PHYs on the bus, or the
+ * value doesn't matter, as there are no other PHYs on the bus.
+ */
+static void uec_configure_serdes(struct net_device *dev)
+{
+ struct ucc_geth_private *ugeth = netdev_priv(dev);
+ struct ucc_geth_info *ug_info = ugeth->ug_info;
+ struct phy_device *tbiphy;
+
+ if (!ug_info->tbi_node) {
+ dev_warn(&dev->dev, "SGMII mode requires that the device "
+ "tree specify a tbi-handle\n");
+ return;
+ }
+
+ tbiphy = of_phy_find_device(ug_info->tbi_node);
+ if (!tbiphy) {
+ dev_err(&dev->dev, "error: Could not get TBI device\n");
+ return;
+ }
+
+ /*
+ * If the link is already up, we must already be ok, and don't need to
+ * configure and reset the TBI<->SerDes link. Maybe U-Boot configured
+ * everything for us? Resetting it takes the link down and requires
+ * several seconds for it to come back.
+ */
+ if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
+ return;
+
+ /* Single clk mode, mii mode off(for serdes communication) */
+ phy_write(tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
+
+ phy_write(tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
+
+ phy_write(tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
+}
+
/* Configure the PHY for dev.
* returns 0 if success. -1 if failure
*/
@@ -1577,41 +1618,7 @@ static int init_phy(struct net_device *dev)
return 0;
}
-/* Initialize TBI PHY interface for communicating with the
- * SERDES lynx PHY on the chip. We communicate with this PHY
- * through the MDIO bus on each controller, treating it as a
- * "normal" PHY at the address found in the UTBIPA register. We assume
- * that the UTBIPA register is valid. Either the MDIO bus code will set
- * it to a value that doesn't conflict with other PHYs on the bus, or the
- * value doesn't matter, as there are no other PHYs on the bus.
- */
-static void uec_configure_serdes(struct net_device *dev)
-{
- struct ucc_geth_private *ugeth = netdev_priv(dev);
-
- if (!ugeth->tbiphy) {
- printk(KERN_WARNING "SGMII mode requires that the device "
- "tree specify a tbi-handle\n");
- return;
- }
- /*
- * If the link is already up, we must already be ok, and don't need to
- * configure and reset the TBI<->SerDes link. Maybe U-Boot configured
- * everything for us? Resetting it takes the link down and requires
- * several seconds for it to come back.
- */
- if (phy_read(ugeth->tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
- return;
-
- /* Single clk mode, mii mode off(for serdes communication) */
- phy_write(ugeth->tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
-
- phy_write(ugeth->tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
-
- phy_write(ugeth->tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
-
-}
static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)
{
@@ -3711,6 +3718,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
}
ug_info->phy_node = phy;
+ /* Find the TBI PHY node. If it's not there, we don't support SGMII */
+ ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
+
/* get the phy interface type, or default to MII */
prop = of_get_property(np, "phy-connection-type", NULL);
if (!prop) {
@@ -3818,37 +3828,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ugeth->ndev = dev;
ugeth->node = np;
- /* Find the TBI PHY. If it's not there, we don't support SGMII */
- ph = of_get_property(np, "tbi-handle", NULL);
- if (ph) {
- struct device_node *tbi = of_find_node_by_phandle(*ph);
- struct of_device *ofdev;
- struct mii_bus *bus;
- const unsigned int *id;
-
- if (!tbi)
- return 0;
-
- mdio = of_get_parent(tbi);
- if (!mdio)
- return 0;
-
- ofdev = of_find_device_by_node(mdio);
-
- of_node_put(mdio);
-
- id = of_get_property(tbi, "reg", NULL);
- if (!id)
- return 0;
- of_node_put(tbi);
-
- bus = dev_get_drvdata(&ofdev->dev);
- if (!bus)
- return 0;
-
- ugeth->tbiphy = bus->phy_map[*id];
- }
-
return 0;
}