Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/ethernet/rocker/rocker.c

The rocker commit was two overlapping changes, one to rename
the ->vport member to ->pport, and another making the bitmask
expression use '1ULL' instead of plain '1'.

Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 17 insertions, 7 deletions

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 37eed4d..7ba8d08 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -161,6 +161,7 @@ config USB_NET_AX8817X
 	    * Linksys USB200M
 	    * Netgear FA120
 	    * Sitecom LN-029
+	    * Sitecom LN-028
 	    * Intellinet USB 2.0 Ethernet
 	    * ST Lab USB 2.0 Ethernet
 	    * TrendNet TU2-ET100
@@ -397,14 +398,14 @@ config USB_NET_CDC_SUBSET
 	  not generally have permanently assigned Ethernet addresses.
 
 config USB_ALI_M5632
-	boolean "ALi M5632 based 'USB 2.0 Data Link' cables"
+	bool "ALi M5632 based 'USB 2.0 Data Link' cables"
 	depends on USB_NET_CDC_SUBSET
 	help
 	  Choose this option if you're using a host-to-host cable
 	  based on this design, which supports USB 2.0 high speed.
 
 config USB_AN2720
-	boolean "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
+	bool "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
 	depends on USB_NET_CDC_SUBSET
 	help
 	  Choose this option if you're using a host-to-host cable
@@ -412,7 +413,7 @@ config USB_AN2720
 	  Cypress brand.
 
 config USB_BELKIN
-	boolean "eTEK based host-to-host cables (Advance, Belkin, ...)"
+	bool "eTEK based host-to-host cables (Advance, Belkin, ...)"
 	depends on USB_NET_CDC_SUBSET
 	default y
 	help
@@ -421,7 +422,7 @@ config USB_BELKIN
 	  microcontroller, with LEDs that indicate traffic.
 
 config USB_ARMLINUX
-	boolean "Embedded ARM Linux links (iPaq, ...)"
+	bool "Embedded ARM Linux links (iPaq, ...)"
 	depends on USB_NET_CDC_SUBSET
 	default y
 	help
@@ -438,14 +439,14 @@ config USB_ARMLINUX
 	  this simpler protocol by installing a different kernel.
 
 config USB_EPSON2888
-	boolean "Epson 2888 based firmware (DEVELOPMENT)"
+	bool "Epson 2888 based firmware (DEVELOPMENT)"
 	depends on USB_NET_CDC_SUBSET
 	help
 	  Choose this option to support the usb networking links used
 	  by some sample firmware from Epson.
 
 config USB_KC2190
-	boolean "KT Technology KC2190 based cables (InstaNet)"
+	bool "KT Technology KC2190 based cables (InstaNet)"
 	depends on USB_NET_CDC_SUBSET
 	help
 	  Choose this option if you're using a host-to-host cable
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index bf49792..1173a24 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -979,6 +979,10 @@ static const struct usb_device_id	products [] = {
 	USB_DEVICE (0x0df6, 0x0056),
 	.driver_info =  (unsigned long) &ax88178_info,
 }, {
+	// Sitecom LN-028 "USB 2.0 10/100/1000 Ethernet adapter"
+	USB_DEVICE (0x0df6, 0x061c),
+	.driver_info =  (unsigned long) &ax88178_info,
+}, {
 	// corega FEther USB2-TX
 	USB_DEVICE (0x07aa, 0x0017),
 	.driver_info =  (unsigned long) &ax8817x_info,
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 3c8dfe5..111d907 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1597,7 +1597,7 @@ hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
 		}
 		cprev = cnow;
 	}
-	current->state = TASK_RUNNING;
+	__set_current_state(TASK_RUNNING);
 	remove_wait_queue(&tiocmget->waitq, &wait);
 
 	return ret;
diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
index 3d18bb0..1bfe0fc 100644
--- a/drivers/net/usb/plusb.c
+++ b/drivers/net/usb/plusb.c
@@ -134,6 +134,11 @@ static const struct usb_device_id	products [] = {
 }, {
 	USB_DEVICE(0x050d, 0x258a),     /* Belkin F5U258/F5U279 (PL-25A1) */
 	.driver_info =  (unsigned long) &prolific_info,
+}, {
+	USB_DEVICE(0x3923, 0x7825),     /* National Instruments USB
+					 * Host-to-Host Cable
+					 */
+	.driver_info =  (unsigned long) &prolific_info,
 },
 
 	{ },		// END