Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

1 files changed, 180 insertions, 3 deletions

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 59496a9..b87b986 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -31,16 +31,19 @@
 #include "wmi-ops.h"
 
 unsigned int ath10k_debug_mask;
+static unsigned int ath10k_cryptmode_param;
 static bool uart_print;
 static bool skip_otp;
 
 module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
+module_param_named(cryptmode, ath10k_cryptmode_param, uint, 0644);
 module_param(uart_print, bool, 0644);
 module_param(skip_otp, bool, 0644);
 
 MODULE_PARM_DESC(debug_mask, "Debugging mask");
 MODULE_PARM_DESC(uart_print, "Uart target debugging");
 MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode");
+MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
 
 static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 	{
@@ -49,6 +52,8 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
 		.uart_pin = 7,
 		.has_shifted_cc_wraparound = true,
+		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
 		.fw = {
 			.dir = QCA988X_HW_2_0_FW_DIR,
 			.fw = QCA988X_HW_2_0_FW_FILE,
@@ -63,6 +68,8 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca6174 hw2.1",
 		.patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
 		.uart_pin = 6,
+		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
 		.fw = {
 			.dir = QCA6174_HW_2_1_FW_DIR,
 			.fw = QCA6174_HW_2_1_FW_FILE,
@@ -77,6 +84,8 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca6174 hw3.0",
 		.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
 		.uart_pin = 6,
+		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
 		.fw = {
 			.dir = QCA6174_HW_3_0_FW_DIR,
 			.fw = QCA6174_HW_3_0_FW_FILE,
@@ -91,6 +100,8 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca6174 hw3.2",
 		.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
 		.uart_pin = 6,
+		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
 		.fw = {
 			/* uses same binaries as hw3.0 */
 			.dir = QCA6174_HW_3_0_FW_DIR,
@@ -101,8 +112,69 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
 		},
 	},
+	{
+		.id = QCA99X0_HW_2_0_DEV_VERSION,
+		.name = "qca99x0 hw2.0",
+		.patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
+		.uart_pin = 7,
+		.otp_exe_param = 0x00000700,
+		.continuous_frag_desc = true,
+		.channel_counters_freq_hz = 150000,
+		.fw = {
+			.dir = QCA99X0_HW_2_0_FW_DIR,
+			.fw = QCA99X0_HW_2_0_FW_FILE,
+			.otp = QCA99X0_HW_2_0_OTP_FILE,
+			.board = QCA99X0_HW_2_0_BOARD_DATA_FILE,
+			.board_size = QCA99X0_BOARD_DATA_SZ,
+			.board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ,
+		},
+	},
+};
+
+static const char *const ath10k_core_fw_feature_str[] = {
+	[ATH10K_FW_FEATURE_EXT_WMI_MGMT_RX] = "wmi-mgmt-rx",
+	[ATH10K_FW_FEATURE_WMI_10X] = "wmi-10.x",
+	[ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX] = "has-wmi-mgmt-tx",
+	[ATH10K_FW_FEATURE_NO_P2P] = "no-p2p",
+	[ATH10K_FW_FEATURE_WMI_10_2] = "wmi-10.2",
+	[ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT] = "multi-vif-ps",
+	[ATH10K_FW_FEATURE_WOWLAN_SUPPORT] = "wowlan",
+	[ATH10K_FW_FEATURE_IGNORE_OTP_RESULT] = "ignore-otp",
+	[ATH10K_FW_FEATURE_NO_NWIFI_DECAP_4ADDR_PADDING] = "no-4addr-pad",
+	[ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT] = "skip-clock-init",
 };
 
+static unsigned int ath10k_core_get_fw_feature_str(char *buf,
+						   size_t buf_len,
+						   enum ath10k_fw_features feat)
+{
+	if (feat >= ARRAY_SIZE(ath10k_core_fw_feature_str) ||
+	    WARN_ON(!ath10k_core_fw_feature_str[feat])) {
+		return scnprintf(buf, buf_len, "bit%d", feat);
+	}
+
+	return scnprintf(buf, buf_len, "%s", ath10k_core_fw_feature_str[feat]);
+}
+
+void ath10k_core_get_fw_features_str(struct ath10k *ar,
+				     char *buf,
+				     size_t buf_len)
+{
+	unsigned int len = 0;
+	int i;
+
+	for (i = 0; i < ATH10K_FW_FEATURE_COUNT; i++) {
+		if (test_bit(i, ar->fw_features)) {
+			if (len > 0)
+				len += scnprintf(buf + len, buf_len - len, ",");
+
+			len += ath10k_core_get_fw_feature_str(buf + len,
+							      buf_len - len,
+							      i);
+		}
+	}
+}
+
 static void ath10k_send_suspend_complete(struct ath10k *ar)
 {
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot suspend complete\n");
@@ -164,6 +236,17 @@ static int ath10k_init_configure_target(struct ath10k *ar)
 		return ret;
 	}
 
+	/* Some devices have a special sanity check that verifies the PCI
+	 * Device ID is written to this host interest var. It is known to be
+	 * required to boot QCA6164.
+	 */
+	ret = ath10k_bmi_write32(ar, hi_hci_uart_pwr_mgmt_params_ext,
+				 ar->dev_id);
+	if (ret) {
+		ath10k_err(ar, "failed to set pwr_mgmt_params: %d\n", ret);
+		return ret;
+	}
+
 	return 0;
 }
 
@@ -355,6 +438,7 @@ out:
 static int ath10k_download_and_run_otp(struct ath10k *ar)
 {
 	u32 result, address = ar->hw_params.patch_load_addr;
+	u32 bmi_otp_exe_param = ar->hw_params.otp_exe_param;
 	int ret;
 
 	ret = ath10k_download_board_data(ar, ar->board_data, ar->board_len);
@@ -380,7 +464,7 @@ static int ath10k_download_and_run_otp(struct ath10k *ar)
 		return ret;
 	}
 
-	ret = ath10k_bmi_execute(ar, address, 0, &result);
+	ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result);
 	if (ret) {
 		ath10k_err(ar, "could not execute otp (%d)\n", ret);
 		return ret;
@@ -412,6 +496,13 @@ static int ath10k_download_fw(struct ath10k *ar, enum ath10k_firmware_mode mode)
 		data = ar->firmware_data;
 		data_len = ar->firmware_len;
 		mode_name = "normal";
+		ret = ath10k_swap_code_seg_configure(ar,
+				ATH10K_SWAP_CODE_SEG_BIN_TYPE_FW);
+		if (ret) {
+			ath10k_err(ar, "failed to configure fw code swap: %d\n",
+				   ret);
+			return ret;
+		}
 		break;
 	case ATH10K_FIRMWARE_MODE_UTF:
 		data = ar->testmode.utf->data;
@@ -451,6 +542,8 @@ static void ath10k_core_free_firmware_files(struct ath10k *ar)
 	if (!IS_ERR(ar->cal_file))
 		release_firmware(ar->cal_file);
 
+	ath10k_swap_code_seg_release(ar);
+
 	ar->board = NULL;
 	ar->board_data = NULL;
 	ar->board_len = 0;
@@ -464,6 +557,7 @@ static void ath10k_core_free_firmware_files(struct ath10k *ar)
 	ar->firmware_len = 0;
 
 	ar->cal_file = NULL;
+
 }
 
 static int ath10k_fetch_cal_file(struct ath10k *ar)
@@ -737,6 +831,13 @@ static int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name)
 			ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie htt op version %d\n",
 				   ar->htt.op_version);
 			break;
+		case ATH10K_FW_IE_FW_CODE_SWAP_IMAGE:
+			ath10k_dbg(ar, ATH10K_DBG_BOOT,
+				   "found fw code swap image ie (%zd B)\n",
+				   ie_len);
+			ar->swap.firmware_codeswap_data = data;
+			ar->swap.firmware_codeswap_len = ie_len;
+			break;
 		default:
 			ath10k_warn(ar, "Unknown FW IE: %u\n",
 				    le32_to_cpu(hdr->id));
@@ -991,6 +1092,46 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 		return -EINVAL;
 	}
 
+	ar->wmi.rx_decap_mode = ATH10K_HW_TXRX_NATIVE_WIFI;
+	switch (ath10k_cryptmode_param) {
+	case ATH10K_CRYPT_MODE_HW:
+		clear_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags);
+		clear_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags);
+		break;
+	case ATH10K_CRYPT_MODE_SW:
+		if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT,
+			      ar->fw_features)) {
+			ath10k_err(ar, "cryptmode > 0 requires raw mode support from firmware");
+			return -EINVAL;
+		}
+
+		set_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags);
+		set_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags);
+		break;
+	default:
+		ath10k_info(ar, "invalid cryptmode: %d\n",
+			    ath10k_cryptmode_param);
+		return -EINVAL;
+	}
+
+	ar->htt.max_num_amsdu = ATH10K_HTT_MAX_NUM_AMSDU_DEFAULT;
+	ar->htt.max_num_ampdu = ATH10K_HTT_MAX_NUM_AMPDU_DEFAULT;
+
+	if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
+		ar->wmi.rx_decap_mode = ATH10K_HW_TXRX_RAW;
+
+		/* Workaround:
+		 *
+		 * Firmware A-MSDU aggregation breaks with RAW Tx encap mode
+		 * and causes enormous performance issues (malformed frames,
+		 * etc).
+		 *
+		 * Disabling A-MSDU makes RAW mode stable with heavy traffic
+		 * albeit a bit slower compared to regular operation.
+		 */
+		ar->htt.max_num_amsdu = 1;
+	}
+
 	/* Backwards compatibility for firmwares without
 	 * ATH10K_FW_IE_WMI_OP_VERSION.
 	 */
@@ -1014,6 +1155,7 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 		ar->htt.max_num_pending_tx = TARGET_NUM_MSDU_DESC;
 		ar->fw_stats_req_mask = WMI_STAT_PDEV | WMI_STAT_VDEV |
 			WMI_STAT_PEER;
+		ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM;
 		break;
 	case ATH10K_FW_WMI_OP_VERSION_10_1:
 	case ATH10K_FW_WMI_OP_VERSION_10_2:
@@ -1023,6 +1165,7 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 		ar->max_num_vdevs = TARGET_10X_NUM_VDEVS;
 		ar->htt.max_num_pending_tx = TARGET_10X_NUM_MSDU_DESC;
 		ar->fw_stats_req_mask = WMI_STAT_PEER;
+		ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM;
 		break;
 	case ATH10K_FW_WMI_OP_VERSION_TLV:
 		ar->max_num_peers = TARGET_TLV_NUM_PEERS;
@@ -1033,6 +1176,17 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 		ar->wow.max_num_patterns = TARGET_TLV_NUM_WOW_PATTERNS;
 		ar->fw_stats_req_mask = WMI_STAT_PDEV | WMI_STAT_VDEV |
 			WMI_STAT_PEER;
+		ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM;
+		break;
+	case ATH10K_FW_WMI_OP_VERSION_10_4:
+		ar->max_num_peers = TARGET_10_4_NUM_PEERS;
+		ar->max_num_stations = TARGET_10_4_NUM_STATIONS;
+		ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS;
+		ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS;
+		ar->num_tids = TARGET_10_4_TGT_NUM_TIDS;
+		ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC;
+		ar->fw_stats_req_mask = WMI_STAT_PEER;
+		ar->max_spatial_stream = WMI_10_4_MAX_SPATIAL_STREAM;
 		break;
 	case ATH10K_FW_WMI_OP_VERSION_UNSET:
 	case ATH10K_FW_WMI_OP_VERSION_MAX:
@@ -1056,6 +1210,7 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 		case ATH10K_FW_WMI_OP_VERSION_TLV:
 			ar->htt.op_version = ATH10K_FW_HTT_OP_VERSION_TLV;
 			break;
+		case ATH10K_FW_WMI_OP_VERSION_10_4:
 		case ATH10K_FW_WMI_OP_VERSION_UNSET:
 		case ATH10K_FW_WMI_OP_VERSION_MAX:
 			WARN_ON(1);
@@ -1272,13 +1427,13 @@ int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt)
 void ath10k_core_stop(struct ath10k *ar)
 {
 	lockdep_assert_held(&ar->conf_mutex);
+	ath10k_debug_stop(ar);
 
 	/* try to suspend target */
 	if (ar->state != ATH10K_STATE_RESTARTING &&
 	    ar->state != ATH10K_STATE_UTF)
 		ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND_AND_DISABLE_INTR);
 
-	ath10k_debug_stop(ar);
 	ath10k_hif_stop(ar);
 	ath10k_htt_tx_free(&ar->htt);
 	ath10k_htt_rx_free(&ar->htt);
@@ -1330,6 +1485,13 @@ static int ath10k_core_probe_fw(struct ath10k *ar)
 		goto err_free_firmware_files;
 	}
 
+	ret = ath10k_swap_code_seg_init(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to initialize code swap segment: %d\n",
+			   ret);
+		goto err_free_firmware_files;
+	}
+
 	mutex_lock(&ar->conf_mutex);
 
 	ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL);
@@ -1470,9 +1632,15 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 	switch (hw_rev) {
 	case ATH10K_HW_QCA988X:
 		ar->regs = &qca988x_regs;
+		ar->hw_values = &qca988x_values;
 		break;
 	case ATH10K_HW_QCA6174:
 		ar->regs = &qca6174_regs;
+		ar->hw_values = &qca6174_values;
+		break;
+	case ATH10K_HW_QCA99X0:
+		ar->regs = &qca99x0_regs;
+		ar->hw_values = &qca99x0_values;
 		break;
 	default:
 		ath10k_err(ar, "unsupported core hardware revision %d\n",
@@ -1497,6 +1665,10 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 	if (!ar->workqueue)
 		goto err_free_mac;
 
+	ar->workqueue_aux = create_singlethread_workqueue("ath10k_aux_wq");
+	if (!ar->workqueue_aux)
+		goto err_free_wq;
+
 	mutex_init(&ar->conf_mutex);
 	spin_lock_init(&ar->data_lock);
 
@@ -1517,10 +1689,12 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 
 	ret = ath10k_debug_create(ar);
 	if (ret)
-		goto err_free_wq;
+		goto err_free_aux_wq;
 
 	return ar;
 
+err_free_aux_wq:
+	destroy_workqueue(ar->workqueue_aux);
 err_free_wq:
 	destroy_workqueue(ar->workqueue);
 
@@ -1536,6 +1710,9 @@ void ath10k_core_destroy(struct ath10k *ar)
 	flush_workqueue(ar->workqueue);
 	destroy_workqueue(ar->workqueue);
 
+	flush_workqueue(ar->workqueue_aux);
+	destroy_workqueue(ar->workqueue_aux);
+
 	ath10k_debug_destroy(ar);
 	ath10k_mac_destroy(ar);
 }