ath10k: add support for qca6174

The QCA6174 in combination with new wmi-tlv firmware is capable of
multi-channel, beamforming, tdls and other features.

This patch just makes it possible to boot these devices and do some basic stuff
like connect to an AP without encryption. Some things may not work or may be
unreliable. New features will be implemented later. This will be addressed
eventually with future patches.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 98 insertions, 7 deletions

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index e0c9f46..a31746d 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -58,9 +58,11 @@ MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
 #define ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS 3
 
 #define QCA988X_2_0_DEVICE_ID	(0x003c)
+#define QCA6174_2_1_DEVICE_ID	(0x003e)
 
 static const struct pci_device_id ath10k_pci_id_table[] = {
 	{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
+	{ PCI_VDEVICE(ATHEROS, QCA6174_2_1_DEVICE_ID) }, /* PCI-E QCA6174 V2.1 */
 	{0}
 };
 
@@ -70,6 +72,11 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
 	 * because of that.
 	 */
 	{ QCA988X_2_0_DEVICE_ID, QCA988X_HW_2_0_CHIP_ID_REV },
+	{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_2_1_CHIP_ID_REV },
+	{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_2_2_CHIP_ID_REV },
+	{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_0_CHIP_ID_REV },
+	{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_1_CHIP_ID_REV },
+	{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_2_CHIP_ID_REV },
 };
 
 static void ath10k_pci_buffer_cleanup(struct ath10k *ar);
@@ -1506,6 +1513,35 @@ static int ath10k_pci_wake_target_cpu(struct ath10k *ar)
 	return 0;
 }
 
+static int ath10k_pci_get_num_banks(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	switch (ar_pci->pdev->device) {
+	case QCA988X_2_0_DEVICE_ID:
+		return 1;
+	case QCA6174_2_1_DEVICE_ID:
+		switch (MS(ar->chip_id, SOC_CHIP_ID_REV)) {
+		case QCA6174_HW_1_0_CHIP_ID_REV:
+		case QCA6174_HW_1_1_CHIP_ID_REV:
+			return 3;
+		case QCA6174_HW_1_3_CHIP_ID_REV:
+			return 2;
+		case QCA6174_HW_2_1_CHIP_ID_REV:
+		case QCA6174_HW_2_2_CHIP_ID_REV:
+			return 6;
+		case QCA6174_HW_3_0_CHIP_ID_REV:
+		case QCA6174_HW_3_1_CHIP_ID_REV:
+		case QCA6174_HW_3_2_CHIP_ID_REV:
+			return 9;
+		}
+		break;
+	}
+
+	ath10k_warn(ar, "unknown number of banks, assuming 1\n");
+	return 1;
+}
+
 static int ath10k_pci_init_config(struct ath10k *ar)
 {
 	u32 interconnect_targ_addr;
@@ -1616,7 +1652,8 @@ static int ath10k_pci_init_config(struct ath10k *ar)
 	/* first bank is switched to IRAM */
 	ealloc_value |= ((HI_EARLY_ALLOC_MAGIC << HI_EARLY_ALLOC_MAGIC_SHIFT) &
 			 HI_EARLY_ALLOC_MAGIC_MASK);
-	ealloc_value |= ((1 << HI_EARLY_ALLOC_IRAM_BANKS_SHIFT) &
+	ealloc_value |= ((ath10k_pci_get_num_banks(ar) <<
+			  HI_EARLY_ALLOC_IRAM_BANKS_SHIFT) &
 			 HI_EARLY_ALLOC_IRAM_BANKS_MASK);
 
 	ret = ath10k_pci_diag_write32(ar, ealloc_targ_addr, ealloc_value);
@@ -1812,12 +1849,12 @@ static int ath10k_pci_warm_reset(struct ath10k *ar)
 	return 0;
 }
 
-static int ath10k_pci_chip_reset(struct ath10k *ar)
+static int ath10k_pci_qca988x_chip_reset(struct ath10k *ar)
 {
 	int i, ret;
 	u32 val;
 
-	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot chip reset\n");
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot 988x chip reset\n");
 
 	/* Some hardware revisions (e.g. CUS223v2) has issues with cold reset.
 	 * It is thus preferred to use warm reset which is safer but may not be
@@ -1881,11 +1918,53 @@ static int ath10k_pci_chip_reset(struct ath10k *ar)
 		return ret;
 	}
 
-	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot chip reset complete (cold)\n");
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot qca988x chip reset complete (cold)\n");
+
+	return 0;
+}
+
+static int ath10k_pci_qca6174_chip_reset(struct ath10k *ar)
+{
+	int ret;
+
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot qca6174 chip reset\n");
+
+	/* FIXME: QCA6174 requires cold + warm reset to work. */
+
+	ret = ath10k_pci_cold_reset(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to cold reset: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_pci_wait_for_target_init(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to wait for target after cold reset: %d\n",
+				ret);
+		return ret;
+	}
+
+	ret = ath10k_pci_warm_reset(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to warm reset: %d\n", ret);
+		return ret;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot qca6174 chip reset complete (cold)\n");
 
 	return 0;
 }
 
+static int ath10k_pci_chip_reset(struct ath10k *ar)
+{
+	if (QCA_REV_988X(ar))
+		return ath10k_pci_qca988x_chip_reset(ar);
+	else if (QCA_REV_6174(ar))
+		return ath10k_pci_qca6174_chip_reset(ar);
+	else
+		return -ENOTSUPP;
+}
+
 static int ath10k_pci_hif_power_up(struct ath10k *ar)
 {
 	int ret;
@@ -2511,11 +2590,23 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	int ret = 0;
 	struct ath10k *ar;
 	struct ath10k_pci *ar_pci;
+	enum ath10k_hw_rev hw_rev;
 	u32 chip_id;
 
-	ar = ath10k_core_create(sizeof(*ar_pci), &pdev->dev,
-				ATH10K_BUS_PCI,
-				&ath10k_pci_hif_ops);
+	switch (pci_dev->device) {
+	case QCA988X_2_0_DEVICE_ID:
+		hw_rev = ATH10K_HW_QCA988X;
+		break;
+	case QCA6174_2_1_DEVICE_ID:
+		hw_rev = ATH10K_HW_QCA6174;
+		break;
+	default:
+		WARN_ON(1);
+		return -ENOTSUPP;
+	}
+
+	ar = ath10k_core_create(sizeof(*ar_pci), &pdev->dev, ATH10K_BUS_PCI,
+				hw_rev, &ath10k_pci_hif_ops);
 	if (!ar) {
 		dev_err(&pdev->dev, "failed to allocate core\n");
 		return -ENOMEM;