Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

1 files changed, 208 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath10k/swap.c b/drivers/net/wireless/ath/ath10k/swap.c
new file mode 100644
index 0000000..3ca3fae
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/swap.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright (c) 2015 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/* This file has implementation for code swap logic. With code swap feature,
+ * target can run the fw binary with even smaller IRAM size by using host
+ * memory to store some of the code segments.
+ */
+
+#include "core.h"
+#include "bmi.h"
+#include "debug.h"
+
+static int ath10k_swap_code_seg_fill(struct ath10k *ar,
+				     struct ath10k_swap_code_seg_info *seg_info,
+				     const void *data, size_t data_len)
+{
+	u8 *virt_addr = seg_info->virt_address[0];
+	u8 swap_magic[ATH10K_SWAP_CODE_SEG_MAGIC_BYTES_SZ] = {};
+	const u8 *fw_data = data;
+	union ath10k_swap_code_seg_item *swap_item;
+	u32 length = 0;
+	u32 payload_len;
+	u32 total_payload_len = 0;
+	u32 size_left = data_len;
+
+	/* Parse swap bin and copy the content to host allocated memory.
+	 * The format is Address, length and value. The last 4-bytes is
+	 * target write address. Currently address field is not used.
+	 */
+	seg_info->target_addr = -1;
+	while (size_left >= sizeof(*swap_item)) {
+		swap_item = (union ath10k_swap_code_seg_item *)fw_data;
+		payload_len = __le32_to_cpu(swap_item->tlv.length);
+		if ((payload_len > size_left) ||
+		    (payload_len == 0 &&
+		     size_left != sizeof(struct ath10k_swap_code_seg_tail))) {
+			ath10k_err(ar, "refusing to parse invalid tlv length %d\n",
+				   payload_len);
+			return -EINVAL;
+		}
+
+		if (payload_len == 0) {
+			if (memcmp(swap_item->tail.magic_signature, swap_magic,
+				   ATH10K_SWAP_CODE_SEG_MAGIC_BYTES_SZ)) {
+				ath10k_err(ar, "refusing an invalid swap file\n");
+				return -EINVAL;
+			}
+			seg_info->target_addr =
+				__le32_to_cpu(swap_item->tail.bmi_write_addr);
+			break;
+		}
+
+		memcpy(virt_addr, swap_item->tlv.data, payload_len);
+		virt_addr += payload_len;
+		length = payload_len +  sizeof(struct ath10k_swap_code_seg_tlv);
+		size_left -= length;
+		fw_data += length;
+		total_payload_len += payload_len;
+	}
+
+	if (seg_info->target_addr == -1) {
+		ath10k_err(ar, "failed to parse invalid swap file\n");
+		return -EINVAL;
+	}
+	seg_info->seg_hw_info.swap_size = __cpu_to_le32(total_payload_len);
+
+	return 0;
+}
+
+static void
+ath10k_swap_code_seg_free(struct ath10k *ar,
+			  struct ath10k_swap_code_seg_info *seg_info)
+{
+	u32 seg_size;
+
+	if (!seg_info)
+		return;
+
+	if (!seg_info->virt_address[0])
+		return;
+
+	seg_size = __le32_to_cpu(seg_info->seg_hw_info.size);
+	dma_free_coherent(ar->dev, seg_size, seg_info->virt_address[0],
+			  seg_info->paddr[0]);
+}
+
+static struct ath10k_swap_code_seg_info *
+ath10k_swap_code_seg_alloc(struct ath10k *ar, size_t swap_bin_len)
+{
+	struct ath10k_swap_code_seg_info *seg_info;
+	void *virt_addr;
+	dma_addr_t paddr;
+
+	swap_bin_len = roundup(swap_bin_len, 2);
+	if (swap_bin_len > ATH10K_SWAP_CODE_SEG_BIN_LEN_MAX) {
+		ath10k_err(ar, "refusing code swap bin because it is too big %zu > %d\n",
+			   swap_bin_len, ATH10K_SWAP_CODE_SEG_BIN_LEN_MAX);
+		return NULL;
+	}
+
+	seg_info = devm_kzalloc(ar->dev, sizeof(*seg_info), GFP_KERNEL);
+	if (!seg_info)
+		return NULL;
+
+	virt_addr = dma_alloc_coherent(ar->dev, swap_bin_len, &paddr,
+				       GFP_KERNEL);
+	if (!virt_addr) {
+		ath10k_err(ar, "failed to allocate dma coherent memory\n");
+		return NULL;
+	}
+
+	seg_info->seg_hw_info.bus_addr[0] = __cpu_to_le32(paddr);
+	seg_info->seg_hw_info.size = __cpu_to_le32(swap_bin_len);
+	seg_info->seg_hw_info.swap_size = __cpu_to_le32(swap_bin_len);
+	seg_info->seg_hw_info.num_segs =
+			__cpu_to_le32(ATH10K_SWAP_CODE_SEG_NUM_SUPPORTED);
+	seg_info->seg_hw_info.size_log2 = __cpu_to_le32(ilog2(swap_bin_len));
+	seg_info->virt_address[0] = virt_addr;
+	seg_info->paddr[0] = paddr;
+
+	return seg_info;
+}
+
+int ath10k_swap_code_seg_configure(struct ath10k *ar,
+				   enum ath10k_swap_code_seg_bin_type type)
+{
+	int ret;
+	struct ath10k_swap_code_seg_info *seg_info = NULL;
+
+	switch (type) {
+	case ATH10K_SWAP_CODE_SEG_BIN_TYPE_FW:
+		if (!ar->swap.firmware_swap_code_seg_info)
+			return 0;
+
+		ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot found firmware code swap binary\n");
+		seg_info = ar->swap.firmware_swap_code_seg_info;
+		break;
+	default:
+	case ATH10K_SWAP_CODE_SEG_BIN_TYPE_OTP:
+	case ATH10K_SWAP_CODE_SEG_BIN_TYPE_UTF:
+		ath10k_warn(ar, "ignoring unknown code swap binary type %d\n",
+			    type);
+		return 0;
+	}
+
+	ret = ath10k_bmi_write_memory(ar, seg_info->target_addr,
+				      &seg_info->seg_hw_info,
+				      sizeof(seg_info->seg_hw_info));
+	if (ret) {
+		ath10k_err(ar, "failed to write Code swap segment information (%d)\n",
+			   ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+void ath10k_swap_code_seg_release(struct ath10k *ar)
+{
+	ath10k_swap_code_seg_free(ar, ar->swap.firmware_swap_code_seg_info);
+	ar->swap.firmware_codeswap_data = NULL;
+	ar->swap.firmware_codeswap_len = 0;
+	ar->swap.firmware_swap_code_seg_info = NULL;
+}
+
+int ath10k_swap_code_seg_init(struct ath10k *ar)
+{
+	int ret;
+	struct ath10k_swap_code_seg_info *seg_info;
+
+	if (!ar->swap.firmware_codeswap_len || !ar->swap.firmware_codeswap_data)
+		return 0;
+
+	seg_info = ath10k_swap_code_seg_alloc(ar,
+					      ar->swap.firmware_codeswap_len);
+	if (!seg_info) {
+		ath10k_err(ar, "failed to allocate fw code swap segment\n");
+		return -ENOMEM;
+	}
+
+	ret = ath10k_swap_code_seg_fill(ar, seg_info,
+					ar->swap.firmware_codeswap_data,
+					ar->swap.firmware_codeswap_len);
+
+	if (ret) {
+		ath10k_warn(ar, "failed to initialize fw code swap segment: %d\n",
+			    ret);
+		ath10k_swap_code_seg_free(ar, seg_info);
+		return ret;
+	}
+
+	ar->swap.firmware_swap_code_seg_info = seg_info;
+
+	return 0;
+}