diff options
| author | Sujith Manoharan <c_manoha@qca.qualcomm.com> | 2013-12-06 10:58:45 (GMT) |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2013-12-09 20:37:58 (GMT) |
| commit | 0f978bfaf2600040f9826f394eb12e023bef3068 (patch) | |
| tree | 57d58a226a986fc7cf0ed4db0c9d041d0f68884e /drivers/net/wireless/ath/ath9k/ar9003_hw.c | |
| parent | 492f478d89b28c97166e4540aa13ac0e7abaa29f (diff) | |
| download | linux-0f978bfaf2600040f9826f394eb12e023bef3068.tar.xz | |
ath9k: Use a separate TX gain table for WZR-HP-G450H
The Buffalo device WZR-HP-G450H uses the index 3 for TX gain,
which is set to the high_power table currently. Later variants
of the router use the same index, but instead refer to the
low_ob_db gain table. This is not handled in the driver since
there is no way to distinguish board revisions and the high_power
table is used (incorrectly) for the newer variants.
By default, devices based on AR9300 using the TX gain index 3 have
to use the high_power table. To make sure that WZR-HP-G450H is not
broken when the high_power table is updated, use a separate array
based on information obtained from the platform data.
The current situation where only the original variant of WZR-HP-G450H
works properly stays unchanged.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/ar9003_hw.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9003_hw.c | 12 |
1 files changed, 9 insertions, 3 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c index 4e8ae4a..29613eb 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c @@ -17,6 +17,7 @@ #include "hw.h" #include "ar9003_mac.h" #include "ar9003_2p2_initvals.h" +#include "ar9003_buffalo_initvals.h" #include "ar9485_initvals.h" #include "ar9340_initvals.h" #include "ar9330_1p1_initvals.h" @@ -592,9 +593,14 @@ static void ar9003_tx_gain_table_mode3(struct ath_hw *ah) else if (AR_SREV_9565(ah)) INIT_INI_ARRAY(&ah->iniModesTxGain, ar9565_1p0_modes_high_power_tx_gain_table); - else - INIT_INI_ARRAY(&ah->iniModesTxGain, - ar9300Modes_high_power_tx_gain_table_2p2); + else { + if (ah->config.tx_gain_buffalo) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9300Modes_high_power_tx_gain_table_buffalo); + else + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9300Modes_high_power_tx_gain_table_2p2); + } } static void ar9003_tx_gain_table_mode4(struct ath_hw *ah) |