Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

1 files changed, 130 insertions, 114 deletions

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index c79cfe0..20d07ef 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -336,12 +336,9 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
 	else
 		wil_dbg_misc(wil, "Scan has no IE's\n");
 
-	rc = wmi_set_ie(wil, WMI_FRAME_PROBE_REQ, request->ie_len,
-			request->ie);
-	if (rc) {
-		wil_err(wil, "Aborting scan, set_ie failed: %d\n", rc);
+	rc = wmi_set_ie(wil, WMI_FRAME_PROBE_REQ, request->ie_len, request->ie);
+	if (rc)
 		goto out;
-	}
 
 	rc = wmi_send(wil, WMI_START_SCAN_CMDID, &cmd, sizeof(cmd.cmd) +
 			cmd.cmd.num_channels * sizeof(cmd.cmd.channel_list[0]));
@@ -462,10 +459,8 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
 	 * ies in FW.
 	 */
 	rc = wmi_set_ie(wil, WMI_FRAME_ASSOC_REQ, sme->ie_len, sme->ie);
-	if (rc) {
-		wil_err(wil, "WMI_SET_APPIE_CMD failed\n");
+	if (rc)
 		goto out;
-	}
 
 	/* WMI_CONNECT_CMD */
 	memset(&conn, 0, sizeof(conn));
@@ -722,17 +717,98 @@ static int wil_fix_bcon(struct wil6210_priv *wil,
 {
 	struct ieee80211_mgmt *f = (struct ieee80211_mgmt *)bcon->probe_resp;
 	size_t hlen = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
-	int rc = 0;
 
 	if (bcon->probe_resp_len <= hlen)
 		return 0;
 
+/* always use IE's from full probe frame, they has more info
+ * notable RSN
+ */
+	bcon->proberesp_ies = f->u.probe_resp.variable;
+	bcon->proberesp_ies_len = bcon->probe_resp_len - hlen;
 	if (!bcon->assocresp_ies) {
-		bcon->assocresp_ies = f->u.probe_resp.variable;
-		bcon->assocresp_ies_len = bcon->probe_resp_len - hlen;
-		rc = 1;
+		bcon->assocresp_ies = bcon->proberesp_ies;
+		bcon->assocresp_ies_len = bcon->proberesp_ies_len;
 	}
 
+	return 1;
+}
+
+/* internal functions for device reset and starting AP */
+static int _wil_cfg80211_set_ies(struct wiphy *wiphy,
+				 struct cfg80211_beacon_data *bcon)
+{
+	int rc;
+	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+	rc = wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, bcon->proberesp_ies_len,
+			bcon->proberesp_ies);
+	if (rc)
+		return rc;
+
+	rc = wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP, bcon->assocresp_ies_len,
+			bcon->assocresp_ies);
+#if 0 /* to use beacon IE's, remove this #if 0 */
+	if (rc)
+		return rc;
+
+	rc = wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->tail_len, bcon->tail);
+#endif
+
+	return rc;
+}
+
+static int _wil_cfg80211_start_ap(struct wiphy *wiphy,
+				  struct net_device *ndev,
+				  const u8 *ssid, size_t ssid_len, u32 privacy,
+				  int bi, u8 chan,
+				  struct cfg80211_beacon_data *bcon,
+				  u8 hidden_ssid)
+{
+	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+	int rc;
+	struct wireless_dev *wdev = ndev->ieee80211_ptr;
+	u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
+
+	wil_set_recovery_state(wil, fw_recovery_idle);
+
+	mutex_lock(&wil->mutex);
+
+	__wil_down(wil);
+	rc = __wil_up(wil);
+	if (rc)
+		goto out;
+
+	rc = wmi_set_ssid(wil, ssid_len, ssid);
+	if (rc)
+		goto out;
+
+	rc = _wil_cfg80211_set_ies(wiphy, bcon);
+	if (rc)
+		goto out;
+
+	wil->privacy = privacy;
+	wil->channel = chan;
+	wil->hidden_ssid = hidden_ssid;
+
+	netif_carrier_on(ndev);
+
+	rc = wmi_pcp_start(wil, bi, wmi_nettype, chan, hidden_ssid);
+	if (rc)
+		goto err_pcp_start;
+
+	rc = wil_bcast_init(wil);
+	if (rc)
+		goto err_bcast;
+
+	goto out; /* success */
+
+err_bcast:
+	wmi_pcp_stop(wil);
+err_pcp_start:
+	netif_carrier_off(ndev);
+out:
+	mutex_unlock(&wil->mutex);
 	return rc;
 }
 
@@ -741,63 +817,50 @@ static int wil_cfg80211_change_beacon(struct wiphy *wiphy,
 				      struct cfg80211_beacon_data *bcon)
 {
 	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
-	struct ieee80211_mgmt *f = (struct ieee80211_mgmt *)bcon->probe_resp;
-	size_t hlen = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
-	const u8 *pr_ies = NULL;
-	size_t pr_ies_len = 0;
 	int rc;
+	u32 privacy = 0;
 
 	wil_dbg_misc(wil, "%s()\n", __func__);
 	wil_print_bcon_data(bcon);
 
-	if (bcon->probe_resp_len > hlen) {
-		pr_ies = f->u.probe_resp.variable;
-		pr_ies_len = bcon->probe_resp_len - hlen;
-	}
-
 	if (wil_fix_bcon(wil, bcon)) {
 		wil_dbg_misc(wil, "Fixed bcon\n");
 		wil_print_bcon_data(bcon);
 	}
 
-	/* FW do not form regular beacon, so bcon IE's are not set
-	 * For the DMG bcon, when it will be supported, bcon IE's will
-	 * be reused; add something like:
-	 * wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->beacon_ies_len,
-	 * bcon->beacon_ies);
-	 */
-	rc = wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, pr_ies_len, pr_ies);
-	if (rc) {
-		wil_err(wil, "set_ie(PROBE_RESP) failed\n");
-		return rc;
-	}
+	if (bcon->proberesp_ies &&
+	    cfg80211_find_ie(WLAN_EID_RSN, bcon->proberesp_ies,
+			     bcon->proberesp_ies_len))
+		privacy = 1;
 
-	rc = wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP,
-			bcon->assocresp_ies_len,
-			bcon->assocresp_ies);
-	if (rc) {
-		wil_err(wil, "set_ie(ASSOC_RESP) failed\n");
-		return rc;
+	/* in case privacy has changed, need to restart the AP */
+	if (wil->privacy != privacy) {
+		struct wireless_dev *wdev = ndev->ieee80211_ptr;
+
+		wil_dbg_misc(wil, "privacy changed %d=>%d. Restarting AP\n",
+			     wil->privacy, privacy);
+
+		rc = _wil_cfg80211_start_ap(wiphy, ndev, wdev->ssid,
+					    wdev->ssid_len, privacy,
+					    wdev->beacon_interval,
+					    wil->channel, bcon,
+					    wil->hidden_ssid);
+	} else {
+		rc = _wil_cfg80211_set_ies(wiphy, bcon);
 	}
 
-	return 0;
+	return rc;
 }
 
 static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 				 struct net_device *ndev,
 				 struct cfg80211_ap_settings *info)
 {
-	int rc = 0;
+	int rc;
 	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
-	struct wireless_dev *wdev = ndev->ieee80211_ptr;
 	struct ieee80211_channel *channel = info->chandef.chan;
 	struct cfg80211_beacon_data *bcon = &info->beacon;
 	struct cfg80211_crypto_settings *crypto = &info->crypto;
-	u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
-	struct ieee80211_mgmt *f = (struct ieee80211_mgmt *)bcon->probe_resp;
-	size_t hlen = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
-	const u8 *pr_ies = NULL;
-	size_t pr_ies_len = 0;
 	u8 hidden_ssid;
 
 	wil_dbg_misc(wil, "%s()\n", __func__);
@@ -807,6 +870,23 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 		return -EINVAL;
 	}
 
+	switch (info->hidden_ssid) {
+	case NL80211_HIDDEN_SSID_NOT_IN_USE:
+		hidden_ssid = WMI_HIDDEN_SSID_DISABLED;
+		break;
+
+	case NL80211_HIDDEN_SSID_ZERO_LEN:
+		hidden_ssid = WMI_HIDDEN_SSID_SEND_EMPTY;
+		break;
+
+	case NL80211_HIDDEN_SSID_ZERO_CONTENTS:
+		hidden_ssid = WMI_HIDDEN_SSID_CLEAR;
+		break;
+
+	default:
+		wil_err(wil, "AP: Invalid hidden SSID %d\n", info->hidden_ssid);
+		return -EOPNOTSUPP;
+	}
 	wil_dbg_misc(wil, "AP on Channel %d %d MHz, %s\n", channel->hw_value,
 		     channel->center_freq, info->privacy ? "secure" : "open");
 	wil_dbg_misc(wil, "Privacy: %d auth_type %d\n",
@@ -820,80 +900,16 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 	wil_print_bcon_data(bcon);
 	wil_print_crypto(wil, crypto);
 
-	if (bcon->probe_resp_len > hlen) {
-		pr_ies = f->u.probe_resp.variable;
-		pr_ies_len = bcon->probe_resp_len - hlen;
-	}
-
 	if (wil_fix_bcon(wil, bcon)) {
 		wil_dbg_misc(wil, "Fixed bcon\n");
 		wil_print_bcon_data(bcon);
 	}
 
-	wil_set_recovery_state(wil, fw_recovery_idle);
-
-	mutex_lock(&wil->mutex);
-
-	__wil_down(wil);
-	rc = __wil_up(wil);
-	if (rc)
-		goto out;
-
-	rc = wmi_set_ssid(wil, info->ssid_len, info->ssid);
-	if (rc)
-		goto out;
-
-	/* IE's */
-	/* bcon 'head IE's are not relevant for 60g band */
-	/*
-	 * FW do not form regular beacon, so bcon IE's are not set
-	 * For the DMG bcon, when it will be supported, bcon IE's will
-	 * be reused; add something like:
-	 * wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->beacon_ies_len,
-	 * bcon->beacon_ies);
-	 */
-	wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, pr_ies_len, pr_ies);
-	wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP, bcon->assocresp_ies_len,
-		   bcon->assocresp_ies);
-
-	wil->privacy = info->privacy;
-
-	switch (info->hidden_ssid) {
-	case NL80211_HIDDEN_SSID_NOT_IN_USE:
-		hidden_ssid = WMI_HIDDEN_SSID_DISABLED;
-		break;
-
-	case NL80211_HIDDEN_SSID_ZERO_LEN:
-		hidden_ssid = WMI_HIDDEN_SSID_SEND_EMPTY;
-		break;
-
-	case NL80211_HIDDEN_SSID_ZERO_CONTENTS:
-		hidden_ssid = WMI_HIDDEN_SSID_CLEAR;
-		break;
-
-	default:
-		rc = -EOPNOTSUPP;
-		goto out;
-	}
-
-	netif_carrier_on(ndev);
-
-	rc = wmi_pcp_start(wil, info->beacon_interval, wmi_nettype,
-			   channel->hw_value, hidden_ssid);
-	if (rc)
-		goto err_pcp_start;
+	rc = _wil_cfg80211_start_ap(wiphy, ndev,
+				    info->ssid, info->ssid_len, info->privacy,
+				    info->beacon_interval, channel->hw_value,
+				    bcon, hidden_ssid);
 
-	rc = wil_bcast_init(wil);
-	if (rc)
-		goto err_bcast;
-
-	goto out; /* success */
-err_bcast:
-	wmi_pcp_stop(wil);
-err_pcp_start:
-	netif_carrier_off(ndev);
-out:
-	mutex_unlock(&wil->mutex);
 	return rc;
 }