Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

1 files changed, 81 insertions, 46 deletions

diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index aa3ecc6..feff1ef 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -21,16 +21,14 @@
 
 #include "wil6210.h"
 
-static int use_msi = 1;
-module_param(use_msi, int, S_IRUGO);
-MODULE_PARM_DESC(use_msi,
-		 " Use MSI interrupt: "
-		 "0 - don't, 1 - (default) - single, or 3");
+static bool use_msi = true;
+module_param(use_msi, bool, S_IRUGO);
+MODULE_PARM_DESC(use_msi, " Use MSI interrupt, default - true");
 
 static
 void wil_set_capabilities(struct wil6210_priv *wil)
 {
-	u32 rev_id = ioread32(wil->csr + HOSTADDR(RGF_USER_JTAG_DEV_ID));
+	u32 rev_id = wil_r(wil, RGF_USER_JTAG_DEV_ID);
 
 	bitmap_zero(wil->hw_capabilities, hw_capability_last);
 
@@ -50,24 +48,12 @@ void wil_set_capabilities(struct wil6210_priv *wil)
 
 void wil_disable_irq(struct wil6210_priv *wil)
 {
-	int irq = wil->pdev->irq;
-
-	disable_irq(irq);
-	if (wil->n_msi == 3) {
-		disable_irq(irq + 1);
-		disable_irq(irq + 2);
-	}
+	disable_irq(wil->pdev->irq);
 }
 
 void wil_enable_irq(struct wil6210_priv *wil)
 {
-	int irq = wil->pdev->irq;
-
-	enable_irq(irq);
-	if (wil->n_msi == 3) {
-		enable_irq(irq + 1);
-		enable_irq(irq + 2);
-	}
+	enable_irq(wil->pdev->irq);
 }
 
 /* Bus ops */
@@ -80,6 +66,7 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil)
 	 * and only MSI should be used
 	 */
 	int msi_only = pdev->msi_enabled;
+	bool _use_msi = use_msi;
 
 	wil_dbg_misc(wil, "%s()\n", __func__);
 
@@ -87,41 +74,20 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil)
 
 	pci_set_master(pdev);
 
-	/*
-	 * how many MSI interrupts to request?
-	 */
-	switch (use_msi) {
-	case 3:
-	case 1:
-		wil_dbg_misc(wil, "Setup %d MSI interrupts\n", use_msi);
-		break;
-	case 0:
-		wil_dbg_misc(wil, "MSI interrupts disabled, use INTx\n");
-		break;
-	default:
-		wil_err(wil, "Invalid use_msi=%d, default to 1\n", use_msi);
-		use_msi = 1;
-	}
-
-	if (use_msi == 3 && pci_enable_msi_range(pdev, 3, 3) < 0) {
-		wil_err(wil, "3 MSI mode failed, try 1 MSI\n");
-		use_msi = 1;
-	}
+	wil_dbg_misc(wil, "Setup %s interrupt\n", use_msi ? "MSI" : "INTx");
 
-	if (use_msi == 1 && pci_enable_msi(pdev)) {
+	if (use_msi && pci_enable_msi(pdev)) {
 		wil_err(wil, "pci_enable_msi failed, use INTx\n");
-		use_msi = 0;
+		_use_msi = false;
 	}
 
-	wil->n_msi = use_msi;
-
-	if ((wil->n_msi == 0) && msi_only) {
+	if (!_use_msi && msi_only) {
 		wil_err(wil, "Interrupt pin not routed, unable to use INTx\n");
 		rc = -ENODEV;
 		goto stop_master;
 	}
 
-	rc = wil6210_init_irq(wil, pdev->irq);
+	rc = wil6210_init_irq(wil, pdev->irq, _use_msi);
 	if (rc)
 		goto stop_master;
 
@@ -293,11 +259,80 @@ static const struct pci_device_id wil6210_pcie_ids[] = {
 };
 MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids);
 
+#ifdef CONFIG_PM
+
+static int wil6210_suspend(struct device *dev, bool is_runtime)
+{
+	int rc = 0;
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct wil6210_priv *wil = pci_get_drvdata(pdev);
+
+	wil_dbg_pm(wil, "%s(%s)\n", __func__,
+		   is_runtime ? "runtime" : "system");
+
+	rc = wil_can_suspend(wil, is_runtime);
+	if (rc)
+		goto out;
+
+	rc = wil_suspend(wil, is_runtime);
+	if (rc)
+		goto out;
+
+	/* TODO: how do I bring card in low power state? */
+
+	/* disable bus mastering */
+	pci_clear_master(pdev);
+	/* PCI will call pci_save_state(pdev) and pci_prepare_to_sleep(pdev) */
+
+out:
+	return rc;
+}
+
+static int wil6210_resume(struct device *dev, bool is_runtime)
+{
+	int rc = 0;
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct wil6210_priv *wil = pci_get_drvdata(pdev);
+
+	wil_dbg_pm(wil, "%s(%s)\n", __func__,
+		   is_runtime ? "runtime" : "system");
+
+	/* allow master */
+	pci_set_master(pdev);
+
+	rc = wil_resume(wil, is_runtime);
+	if (rc)
+		pci_clear_master(pdev);
+
+	return rc;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int wil6210_pm_suspend(struct device *dev)
+{
+	return wil6210_suspend(dev, false);
+}
+
+static int wil6210_pm_resume(struct device *dev)
+{
+	return wil6210_resume(dev, false);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops wil6210_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(wil6210_pm_suspend, wil6210_pm_resume)
+};
+
 static struct pci_driver wil6210_driver = {
 	.probe		= wil_pcie_probe,
 	.remove		= wil_pcie_remove,
 	.id_table	= wil6210_pcie_ids,
 	.name		= WIL_NAME,
+	.driver		= {
+		.pm = &wil6210_pm_ops,
+	},
 };
 
 static int __init wil6210_driver_init(void)