Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) sadb_msg prepared for IPSEC userspace forgets to initialize the
    satype field, fix from Nicolas Dichtel.

 2) Fix mac80211 synchronization during station removal, from Johannes
    Berg.

 3) Fix IPSEC sequence number notifications when they wrap, from Steffen
    Klassert.

 4) Fix cfg80211 wdev tracing crashes when add_virtual_intf() returns an
    error pointer, from Johannes Berg.

 5) In mac80211, don't call into the channel context code with the
    interface list mutex held.  From Johannes Berg.

 6) In mac80211, if we don't actually associate, do not restart the STA
    timer, otherwise we can crash.  From Ben Greear.

 7) Missing dma_mapping_error() check in e1000, ixgb, and e1000e.  From
    Christoph Paasch.

 8) Fix sja1000 driver defines to not conflict with SH port, from Marc
    Kleine-Budde.

 9) Don't call il4965_rs_use_green with a NULL station, from Colin Ian
    King.

10) Suspend/Resume in the FEC driver fail because the buffer descriptors
    are not initialized at all the moments in which they should.  Fix
    from Frank Li.

11) cpsw and davinci_emac drivers both use the wrong interface to
    restart a stopped TX queue.  Use netif_wake_queue not
    netif_start_queue, the latter is for initialization/bringup not
    active management of the queue.  From Mugunthan V N.

12) Fix regression in rate calculations done by
    psched_ratecfg_precompute(), missing u64 type promotion.  From
    Sergey Popovich.

13) Fix length overflow in tg3 VPD parsing, from Kees Cook.

14) AOE driver fails to allocate enough headroom, resulting in crashes.
    Fix from Eric Dumazet.

15) RX overflow happens too quickly in sky2 driver because pause packet
    thresholds are not programmed correctly.  From Mirko Lindner.

16) Bonding driver manages arp_interval and miimon settings incorrectly,
    disabling one unintentionally disables both.  Fix from Nikolay
    Aleksandrov.

17) smsc75xx drivers don't program the RX mac properly for jumbo frames.
    Fix from Steve Glendinning.

18) Fix off-by-one in Codel packet scheduler.  From Vijay Subramanian.

19) Fix packet corruption in atl1c by disabling MSI support, from Hannes
    Frederic Sowa.

20) netdev_rx_handler_unregister() needs a synchronize_net() to fix
    crashes in bonding driver unload stress tests.  From Eric Dumazet.

21) rxlen field of ks8851 RX packet descriptors not interpreted
    correctly (it is 12 bits not 16 bits, so needs to be masked after
    shifting the 32-bit value down 16 bits).  Fix from Max Nekludov.

22) Fix missed RX/TX enable in sh_eth driver due to mishandling of link
    change indications.  From Sergei Shtylyov.

23) Fix crashes during spurious ECI interrupts in sh_eth driver, also
    from Sergei Shtylyov.

24) dm9000 driver initialization is done wrong for revision B devices
    with DSP PHY, from Joseph CHANG.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits)
  DM9000B: driver initialization upgrade
  sh_eth: make 'link' field of 'struct sh_eth_private' *int*
  sh_eth: workaround for spurious ECI interrupt
  sh_eth: fix handling of no LINK signal
  ks8851: Fix interpretation of rxlen field.
  net: add a synchronize_net() in netdev_rx_handler_unregister()
  MAINTAINERS: Update netxen_nic maintainers list
  atl1e: drop pci-msi support because of packet corruption
  net: fq_codel: Fix off-by-one error
  net: calxedaxgmac: Wake-on-LAN fixes
  net: calxedaxgmac: fix rx ring handling when OOM
  net: core: Remove redundant call to 'nf_reset' in 'dev_forward_skb'
  smsc75xx: fix jumbo frame support
  net: fix the use of this_cpu_ptr
  bonding: fix disabling of arp_interval and miimon
  ipv6: don't accept node local multicast traffic from the wire
  sky2: Threshold for Pause Packet is set wrong
  sky2: Receive Overflows not counted
  aoe: reserve enough headroom on skbs
  line up comment for ndo_bridge_getlink
  ...

2 files changed, 57 insertions, 16 deletions

diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 38bc5a7..1221469 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1487,8 +1487,12 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
 	const struct b43_dma_ops *ops;
 	struct b43_dmaring *ring;
 	struct b43_dmadesc_meta *meta;
+	static const struct b43_txstatus fake; /* filled with 0 */
+	const struct b43_txstatus *txstat;
 	int slot, firstused;
 	bool frame_succeed;
+	int skip;
+	static u8 err_out1, err_out2;
 
 	ring = parse_cookie(dev, status->cookie, &slot);
 	if (unlikely(!ring))
@@ -1501,13 +1505,36 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
 	firstused = ring->current_slot - ring->used_slots + 1;
 	if (firstused < 0)
 		firstused = ring->nr_slots + firstused;
+
+	skip = 0;
 	if (unlikely(slot != firstused)) {
 		/* This possibly is a firmware bug and will result in
-		 * malfunction, memory leaks and/or stall of DMA functionality. */
-		b43dbg(dev->wl, "Out of order TX status report on DMA ring %d. "
-		       "Expected %d, but got %d\n",
-		       ring->index, firstused, slot);
-		return;
+		 * malfunction, memory leaks and/or stall of DMA functionality.
+		 */
+		if (slot == next_slot(ring, next_slot(ring, firstused))) {
+			/* If a single header/data pair was missed, skip over
+			 * the first two slots in an attempt to recover.
+			 */
+			slot = firstused;
+			skip = 2;
+			if (!err_out1) {
+				/* Report the error once. */
+				b43dbg(dev->wl,
+				       "Skip on DMA ring %d slot %d.\n",
+				       ring->index, slot);
+				err_out1 = 1;
+			}
+		} else {
+			/* More than a single header/data pair were missed.
+			 * Report this error once.
+			 */
+			if (!err_out2)
+				b43dbg(dev->wl,
+				       "Out of order TX status report on DMA ring %d. Expected %d, but got %d\n",
+				       ring->index, firstused, slot);
+			err_out2 = 1;
+			return;
+		}
 	}
 
 	ops = ring->ops;
@@ -1522,11 +1549,13 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
 			       slot, firstused, ring->index);
 			break;
 		}
+
 		if (meta->skb) {
 			struct b43_private_tx_info *priv_info =
-				b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb));
+			     b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb));
 
-			unmap_descbuffer(ring, meta->dmaaddr, meta->skb->len, 1);
+			unmap_descbuffer(ring, meta->dmaaddr,
+					 meta->skb->len, 1);
 			kfree(priv_info->bouncebuffer);
 			priv_info->bouncebuffer = NULL;
 		} else {
@@ -1538,8 +1567,9 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
 			struct ieee80211_tx_info *info;
 
 			if (unlikely(!meta->skb)) {
-				/* This is a scatter-gather fragment of a frame, so
-				 * the skb pointer must not be NULL. */
+				/* This is a scatter-gather fragment of a frame,
+				 * so the skb pointer must not be NULL.
+				 */
 				b43dbg(dev->wl, "TX status unexpected NULL skb "
 				       "at slot %d (first=%d) on ring %d\n",
 				       slot, firstused, ring->index);
@@ -1550,9 +1580,18 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
 
 			/*
 			 * Call back to inform the ieee80211 subsystem about
-			 * the status of the transmission.
+			 * the status of the transmission. When skipping over
+			 * a missed TX status report, use a status structure
+			 * filled with zeros to indicate that the frame was not
+			 * sent (frame_count 0) and not acknowledged
 			 */
-			frame_succeed = b43_fill_txstatus_report(dev, info, status);
+			if (unlikely(skip))
+				txstat = &fake;
+			else
+				txstat = status;
+
+			frame_succeed = b43_fill_txstatus_report(dev, info,
+								 txstat);
 #ifdef CONFIG_B43_DEBUG
 			if (frame_succeed)
 				ring->nr_succeed_tx_packets++;
@@ -1580,12 +1619,14 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
 		/* Everything unmapped and free'd. So it's not used anymore. */
 		ring->used_slots--;
 
-		if (meta->is_last_fragment) {
+		if (meta->is_last_fragment && !skip) {
 			/* This is the last scatter-gather
 			 * fragment of the frame. We are done. */
 			break;
 		}
 		slot = next_slot(ring, slot);
+		if (skip > 0)
+			--skip;
 	}
 	if (ring->stopped) {
 		B43_WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME);
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 3c35382..e8486c1 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1564,7 +1564,7 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
 	u16 clip_off[2] = { 0xFFFF, 0xFFFF };
 
 	u8 vcm_final = 0;
-	s8 offset[4];
+	s32 offset[4];
 	s32 results[8][4] = { };
 	s32 results_min[4] = { };
 	s32 poll_results[4] = { };
@@ -1615,7 +1615,7 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
 		}
 		for (i = 0; i < 4; i += 2) {
 			s32 curr;
-			s32 mind = 40;
+			s32 mind = 0x100000;
 			s32 minpoll = 249;
 			u8 minvcm = 0;
 			if (2 * core != i)
@@ -1732,7 +1732,7 @@ static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
 	u8 regs_save_radio[2];
 	u16 regs_save_phy[2];
 
-	s8 offset[4];
+	s32 offset[4];
 	u8 core;
 	u8 rail;
 
@@ -1799,7 +1799,7 @@ static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
 	}
 
 	for (i = 0; i < 4; i++) {
-		s32 mind = 40;
+		s32 mind = 0x100000;
 		u8 minvcm = 0;
 		s32 minpoll = 249;
 		s32 curr;