Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull more networking updates from David Miller:
 "Ok, everything from here on out will be bug fixes."

1) One final sync of wireless and bluetooth stuff from John Linville.
   These changes have all been in his tree for more than a week, and
   therefore have had the necessary -next exposure.  John was just away
   on a trip and didn't have a change to send the pull request until a
   day or two ago.

2) Put back some defines in user exposed header file areas that were
   removed during the tokenring purge.  From Stephen Hemminger and Paul
   Gortmaker.

3) A bug fix for UDP hash table allocation got lost in the pile due to
   one of those "you got it..  no I've got it.." situations.  :-)

   From Tim Bird.

4) SKB coalescing in TCP needs to have stricter checks, otherwise we'll
   try to coalesce overlapping frags and crash.  Fix from Eric Dumazet.

5) RCU routing table lookups can race with free_fib_info(), causing
   crashes when we deref the device pointers in the route.  Fix by
   releasing the net device in the RCU callback.  From Yanmin Zhang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (293 commits)
  tcp: take care of overlaps in tcp_try_coalesce()
  ipv4: fix the rcu race between free_fib_info and ip_route_output_slow
  mm: add a low limit to alloc_large_system_hash
  ipx: restore token ring define to include/linux/ipx.h
  if: restore token ring ARP type to header
  xen: do not disable netfront in dom0
  phy/micrel: Fix ID of KSZ9021
  mISDN: Add X-Tensions USB ISDN TA XC-525
  gianfar:don't add FCB length to hard_header_len
  Bluetooth: Report proper error number in disconnection
  Bluetooth: Create flags for bt_sk()
  Bluetooth: report the right security level in getsockopt
  Bluetooth: Lock the L2CAP channel when sending
  Bluetooth: Restore locking semantics when looking up L2CAP channels
  Bluetooth: Fix a redundant and problematic incoming MTU check
  Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C
  Bluetooth: Fix EIR data generation for mgmt_device_found
  Bluetooth: Fix Inquiry with RSSI event mask
  Bluetooth: improve readability of l2cap_seq_list code
  Bluetooth: Fix skb length calculation
  ...

1 files changed, 39 insertions, 440 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
index c93ea35..6d8b721 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
@@ -19,7 +19,6 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/delay.h>
-#include <linux/pci.h>
 
 #include <defs.h>
 #include <chipcommon.h>
@@ -29,8 +28,6 @@
 #include "types.h"
 #include "pub.h"
 #include "pmu.h"
-#include "srom.h"
-#include "nicpci.h"
 #include "aiutils.h"
 
 /* slow_clk_ctl */
@@ -321,7 +318,6 @@
 #define	IS_SIM(chippkg)	\
 	((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID))
 
-#define PCI(sih)	(ai_get_buscoretype(sih) == PCI_CORE_ID)
 #define PCIE(sih)	(ai_get_buscoretype(sih) == PCIE_CORE_ID)
 
 #define PCI_FORCEHT(sih) (PCIE(sih) && (ai_get_chip_id(sih) == BCM4716_CHIP_ID))
@@ -454,36 +450,9 @@ struct aidmp {
 	u32 componentid3;	/* 0xffc */
 };
 
-/* return true if PCIE capability exists in the pci config space */
-static bool ai_ispcie(struct si_info *sii)
-{
-	u8 cap_ptr;
-
-	cap_ptr =
-	    pcicore_find_pci_capability(sii->pcibus, PCI_CAP_ID_EXP, NULL,
-					NULL);
-	if (!cap_ptr)
-		return false;
-
-	return true;
-}
-
-static bool ai_buscore_prep(struct si_info *sii)
-{
-	/* kludge to enable the clock on the 4306 which lacks a slowclock */
-	if (!ai_ispcie(sii))
-		ai_clkctl_xtal(&sii->pub, XTAL | PLL, ON);
-	return true;
-}
-
 static bool
 ai_buscore_setup(struct si_info *sii, struct bcma_device *cc)
 {
-	struct bcma_device *pci = NULL;
-	struct bcma_device *pcie = NULL;
-	struct bcma_device *core;
-
-
 	/* no cores found, bail out */
 	if (cc->bus->nr_cores == 0)
 		return false;
@@ -492,8 +461,7 @@ ai_buscore_setup(struct si_info *sii, struct bcma_device *cc)
 	sii->pub.ccrev = cc->id.rev;
 
 	/* get chipcommon chipstatus */
-	if (ai_get_ccrev(&sii->pub) >= 11)
-		sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus));
+	sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus));
 
 	/* get chipcommon capabilites */
 	sii->pub.cccaps = bcma_read32(cc, CHIPCREGOFFS(capabilities));
@@ -506,64 +474,18 @@ ai_buscore_setup(struct si_info *sii, struct bcma_device *cc)
 	}
 
 	/* figure out buscore */
-	list_for_each_entry(core, &cc->bus->cores, list) {
-		uint cid, crev;
-
-		cid = core->id.id;
-		crev = core->id.rev;
-
-		if (cid == PCI_CORE_ID) {
-			pci = core;
-		} else if (cid == PCIE_CORE_ID) {
-			pcie = core;
-		}
-	}
-
-	if (pci && pcie) {
-		if (ai_ispcie(sii))
-			pci = NULL;
-		else
-			pcie = NULL;
-	}
-	if (pci) {
-		sii->buscore = pci;
-	} else if (pcie) {
-		sii->buscore = pcie;
-	}
-
-	/* fixup necessary chip/core configurations */
-	if (!sii->pch) {
-		sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci.core);
-		if (sii->pch == NULL)
-			return false;
-	}
-	if (ai_pci_fixcfg(&sii->pub))
-		return false;
+	sii->buscore = ai_findcore(&sii->pub, PCIE_CORE_ID, 0);
 
 	return true;
 }
 
-/*
- * get boardtype and boardrev
- */
-static __used void ai_nvram_process(struct si_info *sii)
-{
-	uint w = 0;
-
-	/* do a pci config read to get subsystem id and subvendor id */
-	pci_read_config_dword(sii->pcibus, PCI_SUBSYSTEM_VENDOR_ID, &w);
-
-	sii->pub.boardvendor = w & 0xffff;
-	sii->pub.boardtype = (w >> 16) & 0xffff;
-}
-
 static struct si_info *ai_doattach(struct si_info *sii,
 				   struct bcma_bus *pbus)
 {
 	struct si_pub *sih = &sii->pub;
 	u32 w, savewin;
 	struct bcma_device *cc;
-	uint socitype;
+	struct ssb_sprom *sprom = &pbus->sprom;
 
 	savewin = 0;
 
@@ -573,38 +495,15 @@ static struct si_info *ai_doattach(struct si_info *sii,
 	/* switch to Chipcommon core */
 	cc = pbus->drv_cc.core;
 
-	/* bus/core/clk setup for register access */
-	if (!ai_buscore_prep(sii))
-		return NULL;
+	sih->chip = pbus->chipinfo.id;
+	sih->chiprev = pbus->chipinfo.rev;
+	sih->chippkg = pbus->chipinfo.pkg;
+	sih->boardvendor = pbus->boardinfo.vendor;
+	sih->boardtype = pbus->boardinfo.type;
 
-	/*
-	 * ChipID recognition.
-	 *   We assume we can read chipid at offset 0 from the regs arg.
-	 *   If we add other chiptypes (or if we need to support old sdio
-	 *   hosts w/o chipcommon), some way of recognizing them needs to
-	 *   be added here.
-	 */
-	w = bcma_read32(cc, CHIPCREGOFFS(chipid));
-	socitype = (w & CID_TYPE_MASK) >> CID_TYPE_SHIFT;
-	/* Might as wll fill in chip id rev & pkg */
-	sih->chip = w & CID_ID_MASK;
-	sih->chiprev = (w & CID_REV_MASK) >> CID_REV_SHIFT;
-	sih->chippkg = (w & CID_PKG_MASK) >> CID_PKG_SHIFT;
-
-	/* scan for cores */
-	if (socitype != SOCI_AI)
-		return NULL;
-
-	SI_MSG("Found chip type AI (0x%08x)\n", w);
 	if (!ai_buscore_setup(sii, cc))
 		goto exit;
 
-	/* Init nvram from sprom/otp if they exist */
-	if (srom_var_init(&sii->pub))
-		goto exit;
-
-	ai_nvram_process(sii);
-
 	/* === NVRAM, clock is ready === */
 	bcma_write32(cc, CHIPCREGOFFS(gpiopullup), 0);
 	bcma_write32(cc, CHIPCREGOFFS(gpiopulldown), 0);
@@ -617,15 +516,13 @@ static struct si_info *ai_doattach(struct si_info *sii,
 	}
 
 	/* setup the GPIO based LED powersave register */
-	w = getintvar(sih, BRCMS_SROM_LEDDC);
+	w = (sprom->leddc_on_time << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
+		 (sprom->leddc_off_time << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT);
 	if (w == 0)
 		w = DEFAULT_GPIOTIMERVAL;
 	ai_cc_reg(sih, offsetof(struct chipcregs, gpiotimerval),
 		  ~0, w);
 
-	if (PCIE(sih))
-		pcicore_attach(sii->pch, SI_DOATTACH);
-
 	if (ai_get_chip_id(sih) == BCM43224_CHIP_ID) {
 		/*
 		 * enable 12 mA drive strenth for 43224 and
@@ -659,9 +556,6 @@ static struct si_info *ai_doattach(struct si_info *sii,
 	return sii;
 
  exit:
-	if (sii->pch)
-		pcicore_deinit(sii->pch);
-	sii->pch = NULL;
 
 	return NULL;
 }
@@ -700,11 +594,6 @@ void ai_detach(struct si_pub *sih)
 	if (sii == NULL)
 		return;
 
-	if (sii->pch)
-		pcicore_deinit(sii->pch);
-	sii->pch = NULL;
-
-	srom_free_vars(sih);
 	kfree(sii);
 }
 
@@ -755,21 +644,7 @@ uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val)
 /* return the slow clock source - LPO, XTAL, or PCI */
 static uint ai_slowclk_src(struct si_pub *sih, struct bcma_device *cc)
 {
-	struct si_info *sii;
-	u32 val;
-
-	sii = (struct si_info *)sih;
-	if (ai_get_ccrev(&sii->pub) < 6) {
-		pci_read_config_dword(sii->pcibus, PCI_GPIO_OUT,
-				      &val);
-		if (val & PCI_CFG_GPIO_SCS)
-			return SCC_SS_PCI;
-		return SCC_SS_XTAL;
-	} else if (ai_get_ccrev(&sii->pub) < 10) {
-		return bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)) &
-		       SCC_SS_MASK;
-	} else			/* Insta-clock */
-		return SCC_SS_XTAL;
+	return SCC_SS_XTAL;
 }
 
 /*
@@ -779,36 +654,12 @@ static uint ai_slowclk_src(struct si_pub *sih, struct bcma_device *cc)
 static uint ai_slowclk_freq(struct si_pub *sih, bool max_freq,
 			    struct bcma_device *cc)
 {
-	u32 slowclk;
 	uint div;
 
-	slowclk = ai_slowclk_src(sih, cc);
-	if (ai_get_ccrev(sih) < 6) {
-		if (slowclk == SCC_SS_PCI)
-			return max_freq ? (PCIMAXFREQ / 64)
-				: (PCIMINFREQ / 64);
-		else
-			return max_freq ? (XTALMAXFREQ / 32)
-				: (XTALMINFREQ / 32);
-	} else if (ai_get_ccrev(sih) < 10) {
-		div = 4 *
-		    (((bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)) &
-		      SCC_CD_MASK) >> SCC_CD_SHIFT) + 1);
-		if (slowclk == SCC_SS_LPO)
-			return max_freq ? LPOMAXFREQ : LPOMINFREQ;
-		else if (slowclk == SCC_SS_XTAL)
-			return max_freq ? (XTALMAXFREQ / div)
-				: (XTALMINFREQ / div);
-		else if (slowclk == SCC_SS_PCI)
-			return max_freq ? (PCIMAXFREQ / div)
-				: (PCIMINFREQ / div);
-	} else {
-		/* Chipc rev 10 is InstaClock */
-		div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl));
-		div = 4 * ((div >> SYCC_CD_SHIFT) + 1);
-		return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div);
-	}
-	return 0;
+	/* Chipc rev 10 is InstaClock */
+	div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl));
+	div = 4 * ((div >> SYCC_CD_SHIFT) + 1);
+	return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div);
 }
 
 static void
@@ -831,8 +682,7 @@ ai_clkctl_setdelay(struct si_pub *sih, struct bcma_device *cc)
 
 	/* Starting with 4318 it is ILP that is used for the delays */
 	slowmaxfreq =
-	    ai_slowclk_freq(sih,
-			    (ai_get_ccrev(sih) >= 10) ? false : true, cc);
+	    ai_slowclk_freq(sih, false, cc);
 
 	pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
 	fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
@@ -854,9 +704,8 @@ void ai_clkctl_init(struct si_pub *sih)
 		return;
 
 	/* set all Instaclk chip ILP to 1 MHz */
-	if (ai_get_ccrev(sih) >= 10)
-		bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK,
-			       (ILP_DIV_1MHZ << SYCC_CD_SHIFT));
+	bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK,
+		       (ILP_DIV_1MHZ << SYCC_CD_SHIFT));
 
 	ai_clkctl_setdelay(sih, cc);
 }
@@ -891,140 +740,6 @@ u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih)
 	return fpdelay;
 }
 
-/* turn primary xtal and/or pll off/on */
-int ai_clkctl_xtal(struct si_pub *sih, uint what, bool on)
-{
-	struct si_info *sii;
-	u32 in, out, outen;
-
-	sii = (struct si_info *)sih;
-
-	/* pcie core doesn't have any mapping to control the xtal pu */
-	if (PCIE(sih))
-		return -1;
-
-	pci_read_config_dword(sii->pcibus, PCI_GPIO_IN, &in);
-	pci_read_config_dword(sii->pcibus, PCI_GPIO_OUT, &out);
-	pci_read_config_dword(sii->pcibus, PCI_GPIO_OUTEN, &outen);
-
-	/*
-	 * Avoid glitching the clock if GPRS is already using it.
-	 * We can't actually read the state of the PLLPD so we infer it
-	 * by the value of XTAL_PU which *is* readable via gpioin.
-	 */
-	if (on && (in & PCI_CFG_GPIO_XTAL))
-		return 0;
-
-	if (what & XTAL)
-		outen |= PCI_CFG_GPIO_XTAL;
-	if (what & PLL)
-		outen |= PCI_CFG_GPIO_PLL;
-
-	if (on) {
-		/* turn primary xtal on */
-		if (what & XTAL) {
-			out |= PCI_CFG_GPIO_XTAL;
-			if (what & PLL)
-				out |= PCI_CFG_GPIO_PLL;
-			pci_write_config_dword(sii->pcibus,
-					       PCI_GPIO_OUT, out);
-			pci_write_config_dword(sii->pcibus,
-					       PCI_GPIO_OUTEN, outen);
-			udelay(XTAL_ON_DELAY);
-		}
-
-		/* turn pll on */
-		if (what & PLL) {
-			out &= ~PCI_CFG_GPIO_PLL;
-			pci_write_config_dword(sii->pcibus,
-					       PCI_GPIO_OUT, out);
-			mdelay(2);
-		}
-	} else {
-		if (what & XTAL)
-			out &= ~PCI_CFG_GPIO_XTAL;
-		if (what & PLL)
-			out |= PCI_CFG_GPIO_PLL;
-		pci_write_config_dword(sii->pcibus,
-				       PCI_GPIO_OUT, out);
-		pci_write_config_dword(sii->pcibus,
-				       PCI_GPIO_OUTEN, outen);
-	}
-
-	return 0;
-}
-
-/* clk control mechanism through chipcommon, no policy checking */
-static bool _ai_clkctl_cc(struct si_info *sii, uint mode)
-{
-	struct bcma_device *cc;
-	u32 scc;
-
-	/* chipcommon cores prior to rev6 don't support dynamic clock control */
-	if (ai_get_ccrev(&sii->pub) < 6)
-		return false;
-
-	cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0);
-
-	if (!(ai_get_cccaps(&sii->pub) & CC_CAP_PWR_CTL) &&
-	    (ai_get_ccrev(&sii->pub) < 20))
-		return mode == CLK_FAST;
-
-	switch (mode) {
-	case CLK_FAST:		/* FORCEHT, fast (pll) clock */
-		if (ai_get_ccrev(&sii->pub) < 10) {
-			/*
-			 * don't forget to force xtal back
-			 * on before we clear SCC_DYN_XTAL..
-			 */
-			ai_clkctl_xtal(&sii->pub, XTAL, ON);
-			bcma_maskset32(cc, CHIPCREGOFFS(slow_clk_ctl),
-				       (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
-		} else if (ai_get_ccrev(&sii->pub) < 20) {
-			bcma_set32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_HR);
-		} else {
-			bcma_set32(cc, CHIPCREGOFFS(clk_ctl_st), CCS_FORCEHT);
-		}
-
-		/* wait for the PLL */
-		if (ai_get_cccaps(&sii->pub) & CC_CAP_PMU) {
-			u32 htavail = CCS_HTAVAIL;
-			SPINWAIT(((bcma_read32(cc, CHIPCREGOFFS(clk_ctl_st)) &
-				   htavail) == 0), PMU_MAX_TRANSITION_DLY);
-		} else {
-			udelay(PLL_DELAY);
-		}
-		break;
-
-	case CLK_DYNAMIC:	/* enable dynamic clock control */
-		if (ai_get_ccrev(&sii->pub) < 10) {
-			scc = bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl));
-			scc &= ~(SCC_FS | SCC_IP | SCC_XC);
-			if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
-				scc |= SCC_XC;
-			bcma_write32(cc, CHIPCREGOFFS(slow_clk_ctl), scc);
-
-			/*
-			 * for dynamic control, we have to
-			 * release our xtal_pu "force on"
-			 */
-			if (scc & SCC_XC)
-				ai_clkctl_xtal(&sii->pub, XTAL, OFF);
-		} else if (ai_get_ccrev(&sii->pub) < 20) {
-			/* Instaclock */
-			bcma_mask32(cc, CHIPCREGOFFS(system_clk_ctl), ~SYCC_HR);
-		} else {
-			bcma_mask32(cc, CHIPCREGOFFS(clk_ctl_st), ~CCS_FORCEHT);
-		}
-		break;
-
-	default:
-		break;
-	}
-
-	return mode == CLK_FAST;
-}
-
 /*
  *  clock control policy function throught chipcommon
  *
@@ -1033,133 +748,53 @@ static bool _ai_clkctl_cc(struct si_info *sii, uint mode)
  *    this is a wrapper over the next internal function
  *      to allow flexible policy settings for outside caller
  */
-bool ai_clkctl_cc(struct si_pub *sih, uint mode)
+bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode)
 {
 	struct si_info *sii;
+	struct bcma_device *cc;
 
 	sii = (struct si_info *)sih;
 
-	/* chipcommon cores prior to rev6 don't support dynamic clock control */
-	if (ai_get_ccrev(sih) < 6)
-		return false;
-
 	if (PCI_FORCEHT(sih))
-		return mode == CLK_FAST;
+		return mode == BCMA_CLKMODE_FAST;
 
-	return _ai_clkctl_cc(sii, mode);
+	cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0);
+	bcma_core_set_clockmode(cc, mode);
+	return mode == BCMA_CLKMODE_FAST;
 }
 
 void ai_pci_up(struct si_pub *sih)
 {
 	struct si_info *sii;
+	struct bcma_device *cc;
 
 	sii = (struct si_info *)sih;
 
-	if (PCI_FORCEHT(sih))
-		_ai_clkctl_cc(sii, CLK_FAST);
+	if (PCI_FORCEHT(sih)) {
+		cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0);
+		bcma_core_set_clockmode(cc, BCMA_CLKMODE_FAST);
+	}
 
 	if (PCIE(sih))
-		pcicore_up(sii->pch, SI_PCIUP);
-
-}
-
-/* Unconfigure and/or apply various WARs when system is going to sleep mode */
-void ai_pci_sleep(struct si_pub *sih)
-{
-	struct si_info *sii;
-
-	sii = (struct si_info *)sih;
-
-	pcicore_sleep(sii->pch);
+		bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, true);
 }
 
 /* Unconfigure and/or apply various WARs when going down */
 void ai_pci_down(struct si_pub *sih)
 {
 	struct si_info *sii;
+	struct bcma_device *cc;
 
 	sii = (struct si_info *)sih;
 
 	/* release FORCEHT since chip is going to "down" state */
-	if (PCI_FORCEHT(sih))
-		_ai_clkctl_cc(sii, CLK_DYNAMIC);
-
-	pcicore_down(sii->pch, SI_PCIDOWN);
-}
-
-/*
- * Configure the pci core for pci client (NIC) action
- * coremask is the bitvec of cores by index to be enabled.
- */
-void ai_pci_setup(struct si_pub *sih, uint coremask)
-{
-	struct si_info *sii;
-	u32 w;
-
-	sii = (struct si_info *)sih;
-
-	/*
-	 * Enable sb->pci interrupts.  Assume
-	 * PCI rev 2.3 support was added in pci core rev 6 and things changed..
-	 */
-	if (PCIE(sih) || (PCI(sih) && (ai_get_buscorerev(sih) >= 6))) {
-		/* pci config write to set this core bit in PCIIntMask */
-		pci_read_config_dword(sii->pcibus, PCI_INT_MASK, &w);
-		w |= (coremask << PCI_SBIM_SHIFT);
-		pci_write_config_dword(sii->pcibus, PCI_INT_MASK, w);
-	}
-
-	if (PCI(sih)) {
-		pcicore_pci_setup(sii->pch);
+	if (PCI_FORCEHT(sih)) {
+		cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0);
+		bcma_core_set_clockmode(cc, BCMA_CLKMODE_DYNAMIC);
 	}
-}
 
-/*
- * Fixup SROMless PCI device's configuration.
- * The current core may be changed upon return.
- */
-int ai_pci_fixcfg(struct si_pub *sih)
-{
-	struct si_info *sii = (struct si_info *)sih;
-
-	/* Fixup PI in SROM shadow area to enable the correct PCI core access */
-	/* check 'pi' is correct and fix it if not */
-	pcicore_fixcfg(sii->pch);
-	pcicore_hwup(sii->pch);
-	return 0;
-}
-
-/* mask&set gpiocontrol bits */
-u32 ai_gpiocontrol(struct si_pub *sih, u32 mask, u32 val, u8 priority)
-{
-	uint regoff;
-
-	regoff = offsetof(struct chipcregs, gpiocontrol);
-	return ai_cc_reg(sih, regoff, mask, val);
-}
-
-void ai_chipcontrl_epa4331(struct si_pub *sih, bool on)
-{
-	struct bcma_device *cc;
-	u32 val;
-
-	cc = ai_findcore(sih, CC_CORE_ID, 0);
-
-	if (on) {
-		if (ai_get_chippkg(sih) == 9 || ai_get_chippkg(sih) == 0xb)
-			/* Ext PA Controls for 4331 12x9 Package */
-			bcma_set32(cc, CHIPCREGOFFS(chipcontrol),
-				   CCTRL4331_EXTPA_EN |
-				   CCTRL4331_EXTPA_ON_GPIO2_5);
-		else
-			/* Ext PA Controls for 4331 12x12 Package */
-			bcma_set32(cc, CHIPCREGOFFS(chipcontrol),
-				   CCTRL4331_EXTPA_EN);
-	} else {
-		val &= ~(CCTRL4331_EXTPA_EN | CCTRL4331_EXTPA_ON_GPIO2_5);
-		bcma_mask32(cc, CHIPCREGOFFS(chipcontrol),
-			    ~(CCTRL4331_EXTPA_EN | CCTRL4331_EXTPA_ON_GPIO2_5));
-	}
+	if (PCIE(sih))
+		bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, false);
 }
 
 /* Enable BT-COEX & Ex-PA for 4313 */
@@ -1181,6 +816,9 @@ bool ai_deviceremoved(struct si_pub *sih)
 
 	sii = (struct si_info *)sih;
 
+	if (sii->icbus->hosttype != BCMA_HOSTTYPE_PCI)
+		return false;
+
 	pci_read_config_dword(sii->pcibus, PCI_VENDOR_ID, &w);
 	if ((w & 0xFFFF) != PCI_VENDOR_ID_BROADCOM)
 		return true;
@@ -1188,45 +826,6 @@ bool ai_deviceremoved(struct si_pub *sih)
 	return false;
 }
 
-bool ai_is_sprom_available(struct si_pub *sih)
-{
-	struct si_info *sii = (struct si_info *)sih;
-
-	if (ai_get_ccrev(sih) >= 31) {
-		struct bcma_device *cc;
-		u32 sromctrl;
-
-		if ((ai_get_cccaps(sih) & CC_CAP_SROM) == 0)
-			return false;
-
-		cc = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0);
-		sromctrl = bcma_read32(cc, CHIPCREGOFFS(sromcontrol));
-		return sromctrl & SRC_PRESENT;
-	}
-
-	switch (ai_get_chip_id(sih)) {
-	case BCM4313_CHIP_ID:
-		return (sii->chipst & CST4313_SPROM_PRESENT) != 0;
-	default:
-		return true;
-	}
-}
-
-bool ai_is_otp_disabled(struct si_pub *sih)
-{
-	struct si_info *sii = (struct si_info *)sih;
-
-	switch (ai_get_chip_id(sih)) {
-	case BCM4313_CHIP_ID:
-		return (sii->chipst & CST4313_OTP_PRESENT) == 0;
-		/* These chips always have their OTP on */
-	case BCM43224_CHIP_ID:
-	case BCM43225_CHIP_ID:
-	default:
-		return false;
-	}
-}
-
 uint ai_get_buscoretype(struct si_pub *sih)
 {
 	struct si_info *sii = (struct si_info *)sih;