diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-05-24 18:54:29 (GMT) |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-05-24 18:54:29 (GMT) |
| commit | 28f3d717618156c0dcd2f497d791b578a7931d87 (patch) | |
| tree | 37b11581b51929b5473541e53bd242b3e1a9f666 /drivers/net/wireless/brcm80211 | |
| parent | 654443e20dfc0617231f28a07c96a979ee1a0239 (diff) | |
| parent | 1ca7ee30630e1022dbcf1b51be20580815ffab73 (diff) | |
| download | linux-28f3d717618156c0dcd2f497d791b578a7931d87.tar.xz | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull more networking updates from David Miller:
"Ok, everything from here on out will be bug fixes."
1) One final sync of wireless and bluetooth stuff from John Linville.
These changes have all been in his tree for more than a week, and
therefore have had the necessary -next exposure. John was just away
on a trip and didn't have a change to send the pull request until a
day or two ago.
2) Put back some defines in user exposed header file areas that were
removed during the tokenring purge. From Stephen Hemminger and Paul
Gortmaker.
3) A bug fix for UDP hash table allocation got lost in the pile due to
one of those "you got it.. no I've got it.." situations. :-)
From Tim Bird.
4) SKB coalescing in TCP needs to have stricter checks, otherwise we'll
try to coalesce overlapping frags and crash. Fix from Eric Dumazet.
5) RCU routing table lookups can race with free_fib_info(), causing
crashes when we deref the device pointers in the route. Fix by
releasing the net device in the RCU callback. From Yanmin Zhang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (293 commits)
tcp: take care of overlaps in tcp_try_coalesce()
ipv4: fix the rcu race between free_fib_info and ip_route_output_slow
mm: add a low limit to alloc_large_system_hash
ipx: restore token ring define to include/linux/ipx.h
if: restore token ring ARP type to header
xen: do not disable netfront in dom0
phy/micrel: Fix ID of KSZ9021
mISDN: Add X-Tensions USB ISDN TA XC-525
gianfar:don't add FCB length to hard_header_len
Bluetooth: Report proper error number in disconnection
Bluetooth: Create flags for bt_sk()
Bluetooth: report the right security level in getsockopt
Bluetooth: Lock the L2CAP channel when sending
Bluetooth: Restore locking semantics when looking up L2CAP channels
Bluetooth: Fix a redundant and problematic incoming MTU check
Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C
Bluetooth: Fix EIR data generation for mgmt_device_found
Bluetooth: Fix Inquiry with RSSI event mask
Bluetooth: improve readability of l2cap_seq_list code
Bluetooth: Fix skb length calculation
...
Diffstat (limited to 'drivers/net/wireless/brcm80211')
24 files changed, 668 insertions, 3946 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index 4add7da..e2480d1 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -85,18 +85,15 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev) sdiodev->irq_wake = true; /* must configure SDIO_CCCR_IENx to enable irq */ - data = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_0, - SDIO_CCCR_IENx, &ret); + data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret); data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1; - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_IENx, - data, &ret); + brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret); /* redirect, configure ane enable io for interrupt signal */ data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE; if (sdiodev->irq_flags | IRQF_TRIGGER_HIGH) data |= SDIO_SEPINT_ACT_HI; - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_BRCM_SEPINT, - data, &ret); + brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret); return 0; } @@ -105,9 +102,8 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev) { brcmf_dbg(TRACE, "Entering\n"); - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_BRCM_SEPINT, - 0, NULL); - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_IENx, 0, NULL); + brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL); + brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL); if (sdiodev->irq_wake) { disable_irq_wake(sdiodev->irq); @@ -158,153 +154,147 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev) } #endif /* CONFIG_BRCMFMAC_SDIO_OOB */ -u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr, - int *err) -{ - int status; - s32 retry = 0; - u8 data = 0; - - do { - if (retry) /* wait for 1 ms till bus get settled down */ - udelay(1000); - status = brcmf_sdioh_request_byte(sdiodev, SDIOH_READ, fnc_num, - addr, (u8 *) &data); - } while (status != 0 - && (retry++ < SDIOH_API_ACCESS_RETRY_LIMIT)); - if (err) - *err = status; - - brcmf_dbg(INFO, "fun = %d, addr = 0x%x, u8data = 0x%x\n", - fnc_num, addr, data); - - return data; -} - -void -brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr, - u8 data, int *err) -{ - int status; - s32 retry = 0; - - do { - if (retry) /* wait for 1 ms till bus get settled down */ - udelay(1000); - status = brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, fnc_num, - addr, (u8 *) &data); - } while (status != 0 - && (retry++ < SDIOH_API_ACCESS_RETRY_LIMIT)); - if (err) - *err = status; - - brcmf_dbg(INFO, "fun = %d, addr = 0x%x, u8data = 0x%x\n", - fnc_num, addr, data); -} - int brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address) { - int err = 0; - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW, - (address >> 8) & SBSDIO_SBADDRLOW_MASK, &err); - if (!err) - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_SBADDRMID, - (address >> 16) & SBSDIO_SBADDRMID_MASK, - &err); - if (!err) - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_SBADDRHIGH, - (address >> 24) & SBSDIO_SBADDRHIGH_MASK, - &err); + int err = 0, i; + u8 addr[3]; + s32 retry; + + addr[0] = (address >> 8) & SBSDIO_SBADDRLOW_MASK; + addr[1] = (address >> 16) & SBSDIO_SBADDRMID_MASK; + addr[2] = (address >> 24) & SBSDIO_SBADDRHIGH_MASK; + + for (i = 0; i < 3; i++) { + retry = 0; + do { + if (retry) + usleep_range(1000, 2000); + err = brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, + SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW + i, + &addr[i]); + } while (err != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT); + + if (err) { + brcmf_dbg(ERROR, "failed at addr:0x%0x\n", + SBSDIO_FUNC1_SBADDRLOW + i); + break; + } + } return err; } -u32 brcmf_sdcard_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size) +static int +brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr, + void *data, bool write) { - int status; - u32 word = 0; - uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK; - - brcmf_dbg(INFO, "fun = 1, addr = 0x%x\n", addr); - - if (bar0 != sdiodev->sbwad) { - if (brcmf_sdcard_set_sbaddr_window(sdiodev, bar0)) - return 0xFFFFFFFF; + u8 func_num, reg_size; + u32 bar; + s32 retry = 0; + int ret; - sdiodev->sbwad = bar0; + /* + * figure out how to read the register based on address range + * 0x00 ~ 0x7FF: function 0 CCCR and FBR + * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers + * The rest: function 1 silicon backplane core registers + */ + if ((addr & ~REG_F0_REG_MASK) == 0) { + func_num = SDIO_FUNC_0; + reg_size = 1; + } else if ((addr & ~REG_F1_MISC_MASK) == 0) { + func_num = SDIO_FUNC_1; + reg_size = 1; + } else { + func_num = SDIO_FUNC_1; + reg_size = 4; + + /* Set the window for SB core register */ + bar = addr & ~SBSDIO_SB_OFT_ADDR_MASK; + if (bar != sdiodev->sbwad) { + ret = brcmf_sdcard_set_sbaddr_window(sdiodev, bar); + if (ret != 0) { + memset(data, 0xFF, reg_size); + return ret; + } + sdiodev->sbwad = bar; + } + addr &= SBSDIO_SB_OFT_ADDR_MASK; + addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; } - addr &= SBSDIO_SB_OFT_ADDR_MASK; - if (size == 4) - addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; + do { + if (!write) + memset(data, 0, reg_size); + if (retry) /* wait for 1 ms till bus get settled down */ + usleep_range(1000, 2000); + if (reg_size == 1) + ret = brcmf_sdioh_request_byte(sdiodev, write, + func_num, addr, data); + else + ret = brcmf_sdioh_request_word(sdiodev, write, + func_num, addr, data, 4); + } while (ret != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT); - status = brcmf_sdioh_request_word(sdiodev, SDIOH_READ, SDIO_FUNC_1, - addr, &word, size); + if (ret != 0) + brcmf_dbg(ERROR, "failed with %d\n", ret); - sdiodev->regfail = (status != 0); + return ret; +} - brcmf_dbg(INFO, "u32data = 0x%x\n", word); +u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) +{ + u8 data; + int retval; - /* if ok, return appropriately masked word */ - if (status == 0) { - switch (size) { - case sizeof(u8): - return word & 0xff; - case sizeof(u16): - return word & 0xffff; - case sizeof(u32): - return word; - default: - sdiodev->regfail = true; + brcmf_dbg(INFO, "addr:0x%08x\n", addr); + retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false); + brcmf_dbg(INFO, "data:0x%02x\n", data); - } - } + if (ret) + *ret = retval; - /* otherwise, bad sdio access or invalid size */ - brcmf_dbg(ERROR, "error reading addr 0x%04x size %d\n", addr, size); - return 0xFFFFFFFF; + return data; } -u32 brcmf_sdcard_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size, - u32 data) +u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) { - int status; - uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK; - int err = 0; + u32 data; + int retval; - brcmf_dbg(INFO, "fun = 1, addr = 0x%x, uint%ddata = 0x%x\n", - addr, size * 8, data); + brcmf_dbg(INFO, "addr:0x%08x\n", addr); + retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false); + brcmf_dbg(INFO, "data:0x%08x\n", data); - if (bar0 != sdiodev->sbwad) { - err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0); - if (err) - return err; + if (ret) + *ret = retval; - sdiodev->sbwad = bar0; - } + return data; +} - addr &= SBSDIO_SB_OFT_ADDR_MASK; - if (size == 4) - addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; - status = - brcmf_sdioh_request_word(sdiodev, SDIOH_WRITE, SDIO_FUNC_1, - addr, &data, size); - sdiodev->regfail = (status != 0); +void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, + u8 data, int *ret) +{ + int retval; - if (status == 0) - return 0; + brcmf_dbg(INFO, "addr:0x%08x, data:0x%02x\n", addr, data); + retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true); - brcmf_dbg(ERROR, "error writing 0x%08x to addr 0x%04x size %d\n", - data, addr, size); - return 0xFFFFFFFF; + if (ret) + *ret = retval; } -bool brcmf_sdcard_regfail(struct brcmf_sdio_dev *sdiodev) +void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, + u32 data, int *ret) { - return sdiodev->regfail; + int retval; + + brcmf_dbg(INFO, "addr:0x%08x, data:0x%08x\n", addr, data); + retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true); + + if (ret) + *ret = retval; } static int brcmf_sdcard_recv_prepare(struct brcmf_sdio_dev *sdiodev, uint fn, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index dd07d33..82f51db 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -346,43 +346,17 @@ int brcmf_sdioh_request_buffer(struct brcmf_sdio_dev *sdiodev, return status; } -/* Read client card reg */ -static int -brcmf_sdioh_card_regread(struct brcmf_sdio_dev *sdiodev, int func, u32 regaddr, - int regsize, u32 *data) -{ - - if ((func == 0) || (regsize == 1)) { - u8 temp = 0; - - brcmf_sdioh_request_byte(sdiodev, SDIOH_READ, func, regaddr, - &temp); - *data = temp; - *data &= 0xff; - brcmf_dbg(DATA, "byte read data=0x%02x\n", *data); - } else { - brcmf_sdioh_request_word(sdiodev, SDIOH_READ, func, regaddr, - data, regsize); - if (regsize == 2) - *data &= 0xffff; - - brcmf_dbg(DATA, "word read data=0x%08x\n", *data); - } - - return SUCCESS; -} - static int brcmf_sdioh_get_cisaddr(struct brcmf_sdio_dev *sdiodev, u32 regaddr) { /* read 24 bits and return valid 17 bit addr */ - int i; + int i, ret; u32 scratch, regdata; __le32 scratch_le; u8 *ptr = (u8 *)&scratch_le; for (i = 0; i < 3; i++) { - if ((brcmf_sdioh_card_regread(sdiodev, 0, regaddr, 1, - ®data)) != SUCCESS) + regdata = brcmf_sdio_regrl(sdiodev, regaddr, &ret); + if (ret != 0) brcmf_dbg(ERROR, "Can't read!\n"); *ptr++ = (u8) regdata; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 149ee67..1dbf2be 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -629,43 +629,29 @@ static bool data_ok(struct brcmf_sdio *bus) * Reads a register in the SDIO hardware block. This block occupies a series of * adresses on the 32 bit backplane bus. */ -static void -r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 reg_offset, u32 *retryvar) +static int +r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset) { u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); - *retryvar = 0; - do { - *regvar = brcmf_sdcard_reg_read(bus->sdiodev, - bus->ci->c_inf[idx].base + reg_offset, - sizeof(u32)); - } while (brcmf_sdcard_regfail(bus->sdiodev) && - (++(*retryvar) <= retry_limit)); - if (*retryvar) { - bus->regfails += (*retryvar-1); - if (*retryvar > retry_limit) { - brcmf_dbg(ERROR, "FAILED READ %Xh\n", reg_offset); - *regvar = 0; - } - } + int ret; + + *regvar = brcmf_sdio_regrl(bus->sdiodev, + bus->ci->c_inf[idx].base + offset, &ret); + + return ret; } -static void -w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset, u32 *retryvar) +static int +w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset) { u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); - *retryvar = 0; - do { - brcmf_sdcard_reg_write(bus->sdiodev, - bus->ci->c_inf[idx].base + reg_offset, - sizeof(u32), regval); - } while (brcmf_sdcard_regfail(bus->sdiodev) && - (++(*retryvar) <= retry_limit)); - if (*retryvar) { - bus->regfails += (*retryvar-1); - if (*retryvar > retry_limit) - brcmf_dbg(ERROR, "FAILED REGISTER WRITE %Xh\n", - reg_offset); - } + int ret; + + brcmf_sdio_regwl(bus->sdiodev, + bus->ci->c_inf[idx].base + reg_offset, + regval, &ret); + + return ret; } #define PKT_AVAILABLE() (intstatus & I_HMB_FRAME_IND) @@ -697,16 +683,16 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) clkreq = bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ; - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + clkreq, &err); if (err) { brcmf_dbg(ERROR, "HT Avail request error: %d\n", err); return -EBADE; } /* Check current status */ - clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + clkctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (err) { brcmf_dbg(ERROR, "HT Avail read error: %d\n", err); return -EBADE; @@ -715,9 +701,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) /* Go to pending and await interrupt if appropriate */ if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) { /* Allow only clock-available interrupt */ - devctl = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); if (err) { brcmf_dbg(ERROR, "Devctl error setting CA: %d\n", err); @@ -725,30 +710,28 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) } devctl |= SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, devctl, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); brcmf_dbg(INFO, "CLKCTL: set PENDING\n"); bus->clkstate = CLK_PENDING; return 0; } else if (bus->clkstate == CLK_PENDING) { /* Cancel CA-only interrupt filter */ - devctl = - brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, + devctl = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_DEVICE_CTL, &err); devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, devctl, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); } /* Otherwise, wait here (polling) for HT Avail */ timeout = jiffies + msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000); while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) { - clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, - &err); + clkctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, + &err); if (time_after(jiffies, timeout)) break; else @@ -781,17 +764,16 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) if (bus->clkstate == CLK_PENDING) { /* Cancel CA-only interrupt filter */ - devctl = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, devctl, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); } bus->clkstate = CLK_SDONLY; - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + clkreq, &err); brcmf_dbg(INFO, "CLKCTL: turned OFF\n"); if (err) { brcmf_dbg(ERROR, "Failed access turning clock off: %d\n", @@ -874,7 +856,7 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) static int brcmf_sdbrcm_bussleep(struct brcmf_sdio *bus, bool sleep) { - uint retries = 0; + int ret; brcmf_dbg(INFO, "request %s (currently %s)\n", sleep ? "SLEEP" : "WAKE", @@ -894,22 +876,20 @@ static int brcmf_sdbrcm_bussleep(struct brcmf_sdio *bus, bool sleep) brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); /* Tell device to start using OOB wakeup */ - w_sdreg32(bus, SMB_USE_OOB, - offsetof(struct sdpcmd_regs, tosbmailbox), &retries); - if (retries > retry_limit) + ret = w_sdreg32(bus, SMB_USE_OOB, + offsetof(struct sdpcmd_regs, tosbmailbox)); + if (ret != 0) brcmf_dbg(ERROR, "CANNOT SIGNAL CHIP, WILL NOT WAKE UP!!\n"); /* Turn off our contribution to the HT clock request */ brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, - SBSDIO_FORCE_HW_CLKREQ_OFF, NULL); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + SBSDIO_FORCE_HW_CLKREQ_OFF, NULL); /* Isolate the bus */ - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, - SBSDIO_DEVCTL_PADS_ISO, NULL); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + SBSDIO_DEVCTL_PADS_ISO, NULL); /* Change state */ bus->sleeping = true; @@ -917,21 +897,20 @@ static int brcmf_sdbrcm_bussleep(struct brcmf_sdio *bus, bool sleep) } else { /* Waking up: bus power up is ok, set local state */ - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + 0, NULL); /* Make sure the controller has the bus up */ brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); /* Send misc interrupt to indicate OOB not needed */ - w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, tosbmailboxdata), - &retries); - if (retries <= retry_limit) - w_sdreg32(bus, SMB_DEV_INT, - offsetof(struct sdpcmd_regs, tosbmailbox), - &retries); - - if (retries > retry_limit) + ret = w_sdreg32(bus, 0, + offsetof(struct sdpcmd_regs, tosbmailboxdata)); + if (ret == 0) + ret = w_sdreg32(bus, SMB_DEV_INT, + offsetof(struct sdpcmd_regs, tosbmailbox)); + + if (ret != 0) brcmf_dbg(ERROR, "CANNOT SIGNAL CHIP TO CLEAR OOB!!\n"); /* Make sure we have SD bus access */ @@ -955,17 +934,17 @@ static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus) u32 intstatus = 0; u32 hmb_data; u8 fcbits; - uint retries = 0; + int ret; brcmf_dbg(TRACE, "Enter\n"); /* Read mailbox data and ack that we did so */ - r_sdreg32(bus, &hmb_data, - offsetof(struct sdpcmd_regs, tohostmailboxdata), &retries); + ret = r_sdreg32(bus, &hmb_data, + offsetof(struct sdpcmd_regs, tohostmailboxdata)); - if (retries <= retry_limit) + if (ret == 0) w_sdreg32(bus, SMB_INT_ACK, - offsetof(struct sdpcmd_regs, tosbmailbox), &retries); + offsetof(struct sdpcmd_regs, tosbmailbox)); bus->f1regdata += 2; /* Dongle recomposed rx frames, accept them again */ @@ -1040,17 +1019,16 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) if (abort) brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_FRAMECTRL, - SFC_RF_TERM, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_RF_TERM, &err); bus->f1regdata++; /* Wait until the packet has been flushed (device/FIFO stable) */ for (lastrbc = retries = 0xffff; retries > 0; retries--) { - hi = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_RFRAMEBCHI, NULL); - lo = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_RFRAMEBCLO, NULL); + hi = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_RFRAMEBCHI, &err); + lo = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_RFRAMEBCLO, &err); bus->f1regdata += 2; if ((hi == 0) && (lo == 0)) @@ -1070,11 +1048,11 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) if (rtx) { bus->rxrtx++; - w_sdreg32(bus, SMB_NAK, - offsetof(struct sdpcmd_regs, tosbmailbox), &retries); + err = w_sdreg32(bus, SMB_NAK, + offsetof(struct sdpcmd_regs, tosbmailbox)); bus->f1regdata++; - if (retries <= retry_limit) + if (err == 0) bus->rxskip = true; } @@ -1082,7 +1060,7 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) bus->nextlen = 0; /* If we can't reach the device, signal failure */ - if (err || brcmf_sdcard_regfail(bus->sdiodev)) + if (err) bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; } @@ -2178,21 +2156,16 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt, bus->tx_sderrs++; brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, - NULL); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_WF_TERM, NULL); bus->f1regdata++; for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCHI, - NULL); - lo = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCLO, - NULL); + hi = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, NULL); + lo = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, NULL); bus->f1regdata += 2; if ((hi == 0) && (lo == 0)) break; @@ -2219,7 +2192,6 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) { struct sk_buff *pkt; u32 intstatus = 0; - uint retries = 0; int ret = 0, prec_out; uint cnt = 0; uint datalen; @@ -2249,11 +2221,11 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) /* In poll mode, need to check for other events */ if (!bus->intr && cnt) { /* Check device status, signal pending interrupt */ - r_sdreg32(bus, &intstatus, - offsetof(struct sdpcmd_regs, intstatus), - &retries); + ret = r_sdreg32(bus, &intstatus, + offsetof(struct sdpcmd_regs, + intstatus)); bus->f2txdata++; - if (brcmf_sdcard_regfail(bus->sdiodev)) + if (ret != 0) break; if (intstatus & bus->hostintmask) bus->ipend = true; @@ -2275,7 +2247,6 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) { u32 local_hostintmask; u8 saveclk; - uint retries; int err; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; @@ -2303,7 +2274,7 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); /* Disable and clear interrupts at the chip level also */ - w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask), &retries); + w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask)); local_hostintmask = bus->hostintmask; bus->hostintmask = 0; @@ -2311,24 +2282,23 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; /* Force clocks on backplane to be sure F2 interrupt propagates */ - saveclk = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + saveclk = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (!err) { - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, - (saveclk | SBSDIO_FORCE_HT), &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + (saveclk | SBSDIO_FORCE_HT), &err); } if (err) brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err); /* Turn off the bus (F2), free any pending packets */ brcmf_dbg(INTR, "disable SDIO interrupts\n"); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx, - SDIO_FUNC_ENABLE_1, NULL); + brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1, + NULL); /* Clear any pending interrupts now that F2 is disabled */ w_sdreg32(bus, local_hostintmask, - offsetof(struct sdpcmd_regs, intstatus), &retries); + offsetof(struct sdpcmd_regs, intstatus)); /* Turn off the backplane clock (only) */ brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false); @@ -2373,12 +2343,12 @@ static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus) static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) { u32 intstatus, newstatus = 0; - uint retries = 0; uint rxlimit = bus->rxbound; /* Rx frames to read before resched */ uint txlimit = bus->txbound; /* Tx frames to send before resched */ uint framecnt = 0; /* Temporary counter of tx/rx frames */ bool rxdone = true; /* Flag for no more read data */ bool resched = false; /* Flag indicating resched wanted */ + int err; brcmf_dbg(TRACE, "Enter\n"); @@ -2389,13 +2359,12 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) /* If waiting for HTAVAIL, check status */ if (bus->clkstate == CLK_PENDING) { - int err; u8 clkctl, devctl = 0; #ifdef DEBUG /* Check for inconsistent device control */ - devctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); if (err) { brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err); bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; @@ -2403,8 +2372,8 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) #endif /* DEBUG */ /* Read CSR, if clock on switch to AVAIL, else ignore */ - clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + clkctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (err) { brcmf_dbg(ERROR, "error reading CSR: %d\n", err); @@ -2415,17 +2384,16 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) devctl, clkctl); if (SBSDIO_HTAV(clkctl)) { - devctl = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, &err); + devctl = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); if (err) { brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err); bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; } devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_DEVICE_CTL, devctl, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); if (err) { brcmf_dbg(ERROR, "error writing DEVCTL: %d\n", err); @@ -2447,17 +2415,17 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) /* Pending interrupt indicates new device status */ if (bus->ipend) { bus->ipend = false; - r_sdreg32(bus, &newstatus, - offsetof(struct sdpcmd_regs, intstatus), &retries); + err = r_sdreg32(bus, &newstatus, + offsetof(struct sdpcmd_regs, intstatus)); bus->f1regdata++; - if (brcmf_sdcard_regfail(bus->sdiodev)) + if (err != 0) newstatus = 0; newstatus &= bus->hostintmask; bus->fcstate = !!(newstatus & I_HMB_FC_STATE); if (newstatus) { - w_sdreg32(bus, newstatus, - offsetof(struct sdpcmd_regs, intstatus), - &retries); + err = w_sdreg32(bus, newstatus, + offsetof(struct sdpcmd_regs, + intstatus)); bus->f1regdata++; } } @@ -2472,11 +2440,11 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) */ if (intstatus & I_HMB_FC_CHANGE) { intstatus &= ~I_HMB_FC_CHANGE; - w_sdreg32(bus, I_HMB_FC_CHANGE, - offsetof(struct sdpcmd_regs, intstatus), &retries); + err = w_sdreg32(bus, I_HMB_FC_CHANGE, + offsetof(struct sdpcmd_regs, intstatus)); - r_sdreg32(bus, &newstatus, - offsetof(struct sdpcmd_regs, intstatus), &retries); + err = r_sdreg32(bus, &newstatus, + offsetof(struct sdpcmd_regs, intstatus)); bus->f1regdata += 2; bus->fcstate = !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE)); @@ -2546,21 +2514,18 @@ clkwait: brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, - NULL); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_WF_TERM, &err); bus->f1regdata++; for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCHI, - NULL); - lo = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCLO, - NULL); + hi = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, + &err); + lo = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, + &err); bus->f1regdata += 2; if ((hi == 0) && (lo == 0)) break; @@ -2587,10 +2552,8 @@ clkwait: else await next interrupt */ /* On failed register access, all bets are off: no resched or interrupts */ - if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) || - brcmf_sdcard_regfail(bus->sdiodev)) { - brcmf_dbg(ERROR, "failed backplane access over SDIO, halting operation %d\n", - brcmf_sdcard_regfail(bus->sdiodev)); + if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) || (err != 0)) { + brcmf_dbg(ERROR, "failed backplane access over SDIO, halting operation\n"); bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; bus->intstatus = 0; } else if (bus->clkstate == CLK_PENDING) { @@ -2886,19 +2849,16 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len) brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_FRAMECTRL, - SFC_WF_TERM, NULL); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, + SFC_WF_TERM, NULL); bus->f1regdata++; for (i = 0; i < 3; i++) { u8 hi, lo; - hi = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCHI, - NULL); - lo = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_WFRAMEBCLO, - NULL); + hi = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCHI, NULL); + lo = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_WFRAMEBCLO, NULL); bus->f1regdata += 2; if (hi == 0 && lo == 0) break; @@ -3188,7 +3148,6 @@ static int brcmf_sdbrcm_write_vars(struct brcmf_sdio *bus) static int brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter) { - uint retries; int bcmerror = 0; struct chip_info *ci = bus->ci; @@ -3222,7 +3181,7 @@ static int brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter) } w_sdreg32(bus, 0xFFFFFFFF, - offsetof(struct sdpcmd_regs, intstatus), &retries); + offsetof(struct sdpcmd_regs, intstatus)); ci->resetcore(bus->sdiodev, ci, BCMA_CORE_ARM_CM3); @@ -3444,7 +3403,6 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct brcmf_sdio *bus = sdiodev->bus; unsigned long timeout; - uint retries = 0; u8 ready, enable; int err, ret = 0; u8 saveclk; @@ -3472,13 +3430,11 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) goto exit; /* Force clocks on backplane to be sure F2 interrupt propagates */ - saveclk = - brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, &err); + saveclk = brcmf_sdio_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); if (!err) { - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, - (saveclk | SBSDIO_FORCE_HT), &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + (saveclk | SBSDIO_FORCE_HT), &err); } if (err) { brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err); @@ -3487,17 +3443,16 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) /* Enable function 2 (frame transfers) */ w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, - offsetof(struct sdpcmd_regs, tosbmailboxdata), &retries); + offsetof(struct sdpcmd_regs, tosbmailboxdata)); enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx, - enable, NULL); + brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL); timeout = jiffies + msecs_to_jiffies(BRCMF_WAIT_F2RDY); ready = 0; while (enable != ready) { - ready = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_0, - SDIO_CCCR_IORx, NULL); + ready = brcmf_sdio_regrb(bus->sdiodev, + SDIO_CCCR_IORx, NULL); if (time_after(jiffies, timeout)) break; else if (time_after(jiffies, timeout - BRCMF_WAIT_F2RDY + 50)) @@ -3512,21 +3467,18 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) /* Set up the interrupt mask and enable interrupts */ bus->hostintmask = HOSTINTMASK; w_sdreg32(bus, bus->hostintmask, - offsetof(struct sdpcmd_regs, hostintmask), &retries); + offsetof(struct sdpcmd_regs, hostintmask)); - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_WATERMARK, 8, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err); } else { /* Disable F2 again */ enable = SDIO_FUNC_ENABLE_1; - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, - SDIO_CCCR_IOEx, enable, NULL); + brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL); ret = -ENODEV; } /* Restore previous clock setting */ - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err); if (ret == 0) { ret = brcmf_sdio_intr_register(bus->sdiodev); @@ -3606,9 +3558,9 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) if (!bus->dpc_sched) { u8 devpend; - devpend = brcmf_sdcard_cfg_read(bus->sdiodev, - SDIO_FUNC_0, SDIO_CCCR_INTx, - NULL); + devpend = brcmf_sdio_regrb(bus->sdiodev, + SDIO_CCCR_INTx, + NULL); intstatus = devpend & (INTR_STATUS_FUNC1 | INTR_STATUS_FUNC2); @@ -3732,24 +3684,18 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) bus->alp_only = true; - /* Return the window to backplane enumeration space for core access */ - if (brcmf_sdcard_set_sbaddr_window(bus->sdiodev, SI_ENUM_BASE)) - brcmf_dbg(ERROR, "FAILED to return to SI_ENUM_BASE\n"); - pr_debug("F1 signature read @0x18000000=0x%4x\n", - brcmf_sdcard_reg_read(bus->sdiodev, SI_ENUM_BASE, 4)); + brcmf_sdio_regrl(bus->sdiodev, SI_ENUM_BASE, NULL)); /* * Force PLL off until brcmf_sdio_chip_attach() * programs PLL control regs */ - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, - BRCMF_INIT_CLKCTL1, &err); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + BRCMF_INIT_CLKCTL1, &err); if (!err) - clkctl = - brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1, + clkctl = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err); if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) { @@ -3782,9 +3728,8 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); reg_addr = bus->ci->c_inf[idx].base + offsetof(struct sdpcmd_regs, corecontrol); - reg_val = brcmf_sdcard_reg_read(bus->sdiodev, reg_addr, sizeof(u32)); - brcmf_sdcard_reg_write(bus->sdiodev, reg_addr, sizeof(u32), - reg_val | CC_BPRESEN); + reg_val = brcmf_sdio_regrl(bus->sdiodev, reg_addr, NULL); + brcmf_sdio_regwl(bus->sdiodev, reg_addr, reg_val | CC_BPRESEN, NULL); brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN); @@ -3809,16 +3754,15 @@ static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus) brcmf_dbg(TRACE, "Enter\n"); /* Disable F2 to clear any intermediate frame state on the dongle */ - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx, - SDIO_FUNC_ENABLE_1, NULL); + brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, + SDIO_FUNC_ENABLE_1, NULL); bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; bus->sleeping = false; bus->rxflow = false; /* Done with backplane-dependent accesses, can drop clock... */ - brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); /* ...and initialize clock/power states */ bus->clkstate = CLK_SDONLY; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c index 1534efc..f8e1f1c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c @@ -93,8 +93,9 @@ brcmf_sdio_sb_corerev(struct brcmf_sdio_dev *sdiodev, idx = brcmf_sdio_chip_getinfidx(ci, coreid); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbidhigh), 4); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbidhigh), + NULL); return SBCOREREV(regdata); } @@ -118,8 +119,9 @@ brcmf_sdio_sb_iscoreup(struct brcmf_sdio_dev *sdiodev, idx = brcmf_sdio_chip_getinfidx(ci, coreid); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + NULL); regdata &= (SSB_TMSLOW_RESET | SSB_TMSLOW_REJECT | SSB_IMSTATE_REJECT | SSB_TMSLOW_CLOCK); return (SSB_TMSLOW_CLOCK == regdata); @@ -135,13 +137,13 @@ brcmf_sdio_ai_iscoreup(struct brcmf_sdio_dev *sdiodev, idx = brcmf_sdio_chip_getinfidx(ci, coreid); - regdata = brcmf_sdcard_reg_read(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_IOCTL, 4); + regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + NULL); ret = (regdata & (BCMA_IOCTL_FGC | BCMA_IOCTL_CLK)) == BCMA_IOCTL_CLK; - regdata = brcmf_sdcard_reg_read(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, - 4); + regdata = brcmf_sdio_regrl(sdiodev, + ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, + NULL); ret = ret && ((regdata & BCMA_RESET_CTL_RESET) == 0); return ret; @@ -151,84 +153,85 @@ static void brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci, u16 coreid) { - u32 regdata; + u32 regdata, base; u8 idx; idx = brcmf_sdio_chip_getinfidx(ci, coreid); + base = ci->c_inf[idx].base; - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL); if (regdata & SSB_TMSLOW_RESET) return; - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL); if ((regdata & SSB_TMSLOW_CLOCK) != 0) { /* * set target reject and spin until busy is clear * (preserve core-specific bits) */ - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - 4, regdata | SSB_TMSLOW_REJECT); - - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), + NULL); + brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow), + regdata | SSB_TMSLOW_REJECT, NULL); + + regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), + NULL); udelay(1); - SPINWAIT((brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4) & + SPINWAIT((brcmf_sdio_regrl(sdiodev, + CORE_SB(base, sbtmstatehigh), + NULL) & SSB_TMSHIGH_BUSY), 100000); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(base, sbtmstatehigh), + NULL); if (regdata & SSB_TMSHIGH_BUSY) brcmf_dbg(ERROR, "core state still busy\n"); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbidlow), 4); + regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbidlow), + NULL); if (regdata & SSB_IDLOW_INITIATOR) { - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4) | - SSB_IMSTATE_REJECT; - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4, - regdata); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(base, sbimstate), + NULL); + regdata |= SSB_IMSTATE_REJECT; + brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbimstate), + regdata, NULL); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(base, sbimstate), + NULL); udelay(1); - SPINWAIT((brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4) & + SPINWAIT((brcmf_sdio_regrl(sdiodev, + CORE_SB(base, sbimstate), + NULL) & SSB_IMSTATE_BUSY), 100000); } /* set reset and reject while enabling the clocks */ - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4, - (SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | - SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET)); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + regdata = SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | + SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET; + brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow), + regdata, NULL); + regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), + NULL); udelay(10); /* clear the initiator reject bit */ - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbidlow), 4); + regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbidlow), + NULL); if (regdata & SSB_IDLOW_INITIATOR) { - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4) & - ~SSB_IMSTATE_REJECT; - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4, - regdata); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(base, sbimstate), + NULL); + regdata &= ~SSB_IMSTATE_REJECT; + brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbimstate), + regdata, NULL); } } /* leave reset and reject asserted */ - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4, - (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET)); + brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow), + (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET), NULL); udelay(1); } @@ -242,20 +245,19 @@ brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev, idx = brcmf_sdio_chip_getinfidx(ci, coreid); /* if core is already in reset, just return */ - regdata = brcmf_sdcard_reg_read(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, - 4); + regdata = brcmf_sdio_regrl(sdiodev, + ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, + NULL); if ((regdata & BCMA_RESET_CTL_RESET) != 0) return; - brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, - 4, 0); - regdata = brcmf_sdcard_reg_read(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_IOCTL, 4); + brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, 0, NULL); + regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + NULL); udelay(10); - brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, - 4, BCMA_RESET_CTL_RESET); + brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, + BCMA_RESET_CTL_RESET, NULL); udelay(1); } @@ -279,41 +281,47 @@ brcmf_sdio_sb_resetcore(struct brcmf_sdio_dev *sdiodev, * set reset while enabling the clock and * forcing them on throughout the core */ - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4, - SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + brcmf_sdio_regwl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET, + NULL); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + NULL); udelay(1); /* clear any serror */ - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), + NULL); if (regdata & SSB_TMSHIGH_SERR) - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4, 0); + brcmf_sdio_regwl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), + 0, NULL); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbimstate), + NULL); if (regdata & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), 4, - regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO)); + brcmf_sdio_regwl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbimstate), + regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO), + NULL); /* clear reset and allow it to propagate throughout the core */ - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4, - SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + brcmf_sdio_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK, NULL); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + NULL); udelay(1); /* leave clock enabled */ - brcmf_sdcard_reg_write(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - 4, SSB_TMSLOW_CLOCK); - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4); + brcmf_sdio_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + SSB_TMSLOW_CLOCK, NULL); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_SB(ci->c_inf[idx].base, sbtmstatelow), + NULL); udelay(1); } @@ -330,18 +338,18 @@ brcmf_sdio_ai_resetcore(struct brcmf_sdio_dev *sdiodev, brcmf_sdio_ai_coredisable(sdiodev, ci, coreid); /* now do initialization sequence */ - brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, - 4, BCMA_IOCTL_FGC | BCMA_IOCTL_CLK); - regdata = brcmf_sdcard_reg_read(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_IOCTL, 4); - brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, - 4, 0); + brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL); + regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + NULL); + brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, + 0, NULL); udelay(1); - brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, - 4, BCMA_IOCTL_CLK); - regdata = brcmf_sdcard_reg_read(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_IOCTL, 4); + brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + BCMA_IOCTL_CLK, NULL); + regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, + NULL); udelay(1); } @@ -358,8 +366,9 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev, */ ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON; ci->c_inf[0].base = regs; - regdata = brcmf_sdcard_reg_read(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, chipid), 4); + regdata = brcmf_sdio_regrl(sdiodev, + CORE_CC_REG(ci->c_inf[0].base, chipid), + NULL); ci->chip = regdata & CID_ID_MASK; ci->chiprev = (regdata & CID_REV_MASK) >> CID_REV_SHIFT; ci->socitype = (regdata & CID_TYPE_MASK) >> CID_TYPE_SHIFT; @@ -428,8 +437,7 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) /* Try forcing SDIO core to do ALPAvail request only */ clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ; - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); + brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); if (err) { brcmf_dbg(ERROR, "error writing for HT off\n"); return err; @@ -437,8 +445,8 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) /* If register supported, wait for ALPAvail and then force ALP */ /* This may take up to 15 milliseconds */ - clkval = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, NULL); + clkval = brcmf_sdio_regrb(sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, NULL); if ((clkval & ~SBSDIO_AVBITS) != clkset) { brcmf_dbg(ERROR, "ChipClkCSR access: wrote 0x%02x read 0x%02x\n", @@ -446,8 +454,8 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) return -EACCES; } - SPINWAIT(((clkval = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, NULL)), + SPINWAIT(((clkval = brcmf_sdio_regrb(sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, NULL)), !SBSDIO_ALPAV(clkval)), PMU_MAX_TRANSITION_DLY); if (!SBSDIO_ALPAV(clkval)) { @@ -457,13 +465,11 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) } clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP; - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); + brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); udelay(65); /* Also, disable the extra SDIO pull-ups */ - brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1, - SBSDIO_FUNC1_SDIOPULLUP, 0, NULL); + brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL); return 0; } @@ -472,18 +478,22 @@ static void brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci) { + u32 base = ci->c_inf[0].base; + /* get chipcommon rev */ ci->c_inf[0].rev = ci->corerev(sdiodev, ci, ci->c_inf[0].id); /* get chipcommon capabilites */ - ci->c_inf[0].caps = - brcmf_sdcard_reg_read(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, capabilities), 4); + ci->c_inf[0].caps = brcmf_sdio_regrl(sdiodev, + CORE_CC_REG(base, capabilities), + NULL); /* get pmu caps & rev */ if (ci->c_inf[0].caps & CC_CAP_PMU) { - ci->pmucaps = brcmf_sdcard_reg_read(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, pmucapabilities), 4); + ci->pmucaps = + brcmf_sdio_regrl(sdiodev, + CORE_CC_REG(base, pmucapabilities), + NULL); ci->pmurev = ci->pmucaps & PCAP_REV_MASK; } @@ -523,10 +533,10 @@ int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev, brcmf_sdio_chip_buscoresetup(sdiodev, ci); - brcmf_sdcard_reg_write(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, gpiopullup), 4, 0); - brcmf_sdcard_reg_write(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, gpiopulldown), 4, 0); + brcmf_sdio_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopullup), + 0, NULL); + brcmf_sdio_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopulldown), + 0, NULL); *ci_ptr = ci; return 0; @@ -562,6 +572,7 @@ brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, u32 str_mask = 0; u32 str_shift = 0; char chn[8]; + u32 base = ci->c_inf[0].base; if (!(ci->c_inf[0].caps & CC_CAP_PMU)) return; @@ -591,17 +602,17 @@ brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, } } - brcmf_sdcard_reg_write(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, chipcontrol_addr), - 4, 1); - cc_data_temp = brcmf_sdcard_reg_read(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, chipcontrol_addr), 4); + brcmf_sdio_regwl(sdiodev, CORE_CC_REG(base, chipcontrol_addr), + 1, NULL); + cc_data_temp = + brcmf_sdio_regrl(sdiodev, + CORE_CC_REG(base, chipcontrol_addr), + NULL); cc_data_temp &= ~str_mask; drivestrength_sel <<= str_shift; cc_data_temp |= drivestrength_sel; - brcmf_sdcard_reg_write(sdiodev, - CORE_CC_REG(ci->c_inf[0].base, chipcontrol_addr), - 4, cc_data_temp); + brcmf_sdio_regwl(sdiodev, CORE_CC_REG(base, chipcontrol_addr), + cc_data_temp, NULL); brcmf_dbg(INFO, "SDIO: %dmA drive strength selected, set to 0x%08x\n", drivestrength, cc_data_temp); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h index 7010eaf..29bf78d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h @@ -40,6 +40,10 @@ /* Maximum number of I/O funcs */ #define SDIOD_MAX_IOFUNCS 7 +/* mask of register map */ +#define REG_F0_REG_MASK 0x7FF +#define REG_F1_MISC_MASK 0x1FFFF + /* as of sdiod rev 0, supports 3 functions */ #define SBSDIO_NUM_FUNCTION 3 @@ -142,7 +146,6 @@ struct brcmf_sdio_dev { u8 num_funcs; /* Supported funcs on client */ u32 func_cis_ptr[SDIOD_MAX_IOFUNCS]; u32 sbwad; /* Save backplane window address */ - bool regfail; /* status of last reg_r/w call */ void *bus; atomic_t suspend; /* suspend flag */ wait_queue_head_t request_byte_wait; @@ -164,31 +167,13 @@ struct brcmf_sdio_dev { extern int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev); extern int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev); -/* Access SDIO address space (e.g. CCCR) using CMD52 (single-byte interface). - * fn: function number - * addr: unmodified SDIO-space address - * data: data byte to write - * err: pointer to error code (or NULL) - */ -extern u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint func, - u32 addr, int *err); -extern void brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint func, - u32 addr, u8 data, int *err); - -/* Synchronous access to device (client) core registers via CMD53 to F1. - * addr: backplane address (i.e. >= regsva from attach) - * size: register width in bytes (2 or 4) - * data: data for register write - */ -extern u32 -brcmf_sdcard_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size); - -extern u32 -brcmf_sdcard_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size, - u32 data); - -/* Indicate if last reg read/write failed */ -extern bool brcmf_sdcard_regfail(struct brcmf_sdio_dev *sdiodev); +/* sdio device register access interface */ +extern u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); +extern u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); +extern void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, + u8 data, int *ret); +extern void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, + u32 data, int *ret); /* Buffer transfer to/from device (client) core via cmd53. * fn: function number diff --git a/drivers/net/wireless/brcm80211/brcmsmac/Makefile b/drivers/net/wireless/brcm80211/brcmsmac/Makefile index c2eb2d0..e227c4c 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/Makefile +++ b/drivers/net/wireless/brcm80211/brcmsmac/Makefile @@ -39,10 +39,7 @@ BRCMSMAC_OFILES := \ phy/phytbl_lcn.o \ phy/phytbl_n.o \ phy/phy_qmath.o \ - otp.o \ - srom.o \ dma.o \ - nicpci.o \ brcms_trace_events.o MODULEPFX := brcmsmac diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c index c93ea35..6d8b721 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c @@ -19,7 +19,6 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/delay.h> -#include <linux/pci.h> #include <defs.h> #include <chipcommon.h> @@ -29,8 +28,6 @@ #include "types.h" #include "pub.h" #include "pmu.h" -#include "srom.h" -#include "nicpci.h" #include "aiutils.h" /* slow_clk_ctl */ @@ -321,7 +318,6 @@ #define IS_SIM(chippkg) \ ((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID)) -#define PCI(sih) (ai_get_buscoretype(sih) == PCI_CORE_ID) #define PCIE(sih) (ai_get_buscoretype(sih) == PCIE_CORE_ID) #define PCI_FORCEHT(sih) (PCIE(sih) && (ai_get_chip_id(sih) == BCM4716_CHIP_ID)) @@ -454,36 +450,9 @@ struct aidmp { u32 componentid3; /* 0xffc */ }; -/* return true if PCIE capability exists in the pci config space */ -static bool ai_ispcie(struct si_info *sii) -{ - u8 cap_ptr; - - cap_ptr = - pcicore_find_pci_capability(sii->pcibus, PCI_CAP_ID_EXP, NULL, - NULL); - if (!cap_ptr) - return false; - - return true; -} - -static bool ai_buscore_prep(struct si_info *sii) -{ - /* kludge to enable the clock on the 4306 which lacks a slowclock */ - if (!ai_ispcie(sii)) - ai_clkctl_xtal(&sii->pub, XTAL | PLL, ON); - return true; -} - static bool ai_buscore_setup(struct si_info *sii, struct bcma_device *cc) { - struct bcma_device *pci = NULL; - struct bcma_device *pcie = NULL; - struct bcma_device *core; - - /* no cores found, bail out */ if (cc->bus->nr_cores == 0) return false; @@ -492,8 +461,7 @@ ai_buscore_setup(struct si_info *sii, struct bcma_device *cc) sii->pub.ccrev = cc->id.rev; /* get chipcommon chipstatus */ - if (ai_get_ccrev(&sii->pub) >= 11) - sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus)); + sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus)); /* get chipcommon capabilites */ sii->pub.cccaps = bcma_read32(cc, CHIPCREGOFFS(capabilities)); @@ -506,64 +474,18 @@ ai_buscore_setup(struct si_info *sii, struct bcma_device *cc) } /* figure out buscore */ - list_for_each_entry(core, &cc->bus->cores, list) { - uint cid, crev; - - cid = core->id.id; - crev = core->id.rev; - - if (cid == PCI_CORE_ID) { - pci = core; - } else if (cid == PCIE_CORE_ID) { - pcie = core; - } - } - - if (pci && pcie) { - if (ai_ispcie(sii)) - pci = NULL; - else - pcie = NULL; - } - if (pci) { - sii->buscore = pci; - } else if (pcie) { - sii->buscore = pcie; - } - - /* fixup necessary chip/core configurations */ - if (!sii->pch) { - sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci.core); - if (sii->pch == NULL) - return false; - } - if (ai_pci_fixcfg(&sii->pub)) - return false; + sii->buscore = ai_findcore(&sii->pub, PCIE_CORE_ID, 0); return true; } -/* - * get boardtype and boardrev - */ -static __used void ai_nvram_process(struct si_info *sii) -{ - uint w = 0; - - /* do a pci config read to get subsystem id and subvendor id */ - pci_read_config_dword(sii->pcibus, PCI_SUBSYSTEM_VENDOR_ID, &w); - - sii->pub.boardvendor = w & 0xffff; - sii->pub.boardtype = (w >> 16) & 0xffff; -} - static struct si_info *ai_doattach(struct si_info *sii, struct bcma_bus *pbus) { struct si_pub *sih = &sii->pub; u32 w, savewin; struct bcma_device *cc; - uint socitype; + struct ssb_sprom *sprom = &pbus->sprom; savewin = 0; @@ -573,38 +495,15 @@ static struct si_info *ai_doattach(struct si_info *sii, /* switch to Chipcommon core */ cc = pbus->drv_cc.core; - /* bus/core/clk setup for register access */ - if (!ai_buscore_prep(sii)) - return NULL; + sih->chip = pbus->chipinfo.id; + sih->chiprev = pbus->chipinfo.rev; + sih->chippkg = pbus->chipinfo.pkg; + sih->boardvendor = pbus->boardinfo.vendor; + sih->boardtype = pbus->boardinfo.type; - /* - * ChipID recognition. - * We assume we can read chipid at offset 0 from the regs arg. - * If we add other chiptypes (or if we need to support old sdio - * hosts w/o chipcommon), some way of recognizing them needs to - * be added here. - */ - w = bcma_read32(cc, CHIPCREGOFFS(chipid)); - socitype = (w & CID_TYPE_MASK) >> CID_TYPE_SHIFT; - /* Might as wll fill in chip id rev & pkg */ - sih->chip = w & CID_ID_MASK; - sih->chiprev = (w & CID_REV_MASK) >> CID_REV_SHIFT; - sih->chippkg = (w & CID_PKG_MASK) >> CID_PKG_SHIFT; - - /* scan for cores */ - if (socitype != SOCI_AI) - return NULL; - - SI_MSG("Found chip type AI (0x%08x)\n", w); if (!ai_buscore_setup(sii, cc)) goto exit; - /* Init nvram from sprom/otp if they exist */ - if (srom_var_init(&sii->pub)) - goto exit; - - ai_nvram_process(sii); - /* === NVRAM, clock is ready === */ bcma_write32(cc, CHIPCREGOFFS(gpiopullup), 0); bcma_write32(cc, CHIPCREGOFFS(gpiopulldown), 0); @@ -617,15 +516,13 @@ static struct si_info *ai_doattach(struct si_info *sii, } /* setup the GPIO based LED powersave register */ - w = getintvar(sih, BRCMS_SROM_LEDDC); + w = (sprom->leddc_on_time << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | + (sprom->leddc_off_time << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT); if (w == 0) w = DEFAULT_GPIOTIMERVAL; ai_cc_reg(sih, offsetof(struct chipcregs, gpiotimerval), ~0, w); - if (PCIE(sih)) - pcicore_attach(sii->pch, SI_DOATTACH); - if (ai_get_chip_id(sih) == BCM43224_CHIP_ID) { /* * enable 12 mA drive strenth for 43224 and @@ -659,9 +556,6 @@ static struct si_info *ai_doattach(struct si_info *sii, return sii; exit: - if (sii->pch) - pcicore_deinit(sii->pch); - sii->pch = NULL; return NULL; } @@ -700,11 +594,6 @@ void ai_detach(struct si_pub *sih) if (sii == NULL) return; - if (sii->pch) - pcicore_deinit(sii->pch); - sii->pch = NULL; - - srom_free_vars(sih); kfree(sii); } @@ -755,21 +644,7 @@ uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val) /* return the slow clock source - LPO, XTAL, or PCI */ static uint ai_slowclk_src(struct si_pub *sih, struct bcma_device *cc) { - struct si_info *sii; - u32 val; - - sii = (struct si_info *)sih; - if (ai_get_ccrev(&sii->pub) < 6) { - pci_read_config_dword(sii->pcibus, PCI_GPIO_OUT, - &val); - if (val & PCI_CFG_GPIO_SCS) - return SCC_SS_PCI; - return SCC_SS_XTAL; - } else if (ai_get_ccrev(&sii->pub) < 10) { - return bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)) & - SCC_SS_MASK; - } else /* Insta-clock */ - return SCC_SS_XTAL; + return SCC_SS_XTAL; } /* @@ -779,36 +654,12 @@ static uint ai_slowclk_src(struct si_pub *sih, struct bcma_device *cc) static uint ai_slowclk_freq(struct si_pub *sih, bool max_freq, struct bcma_device *cc) { - u32 slowclk; uint div; - slowclk = ai_slowclk_src(sih, cc); - if (ai_get_ccrev(sih) < 6) { - if (slowclk == SCC_SS_PCI) - return max_freq ? (PCIMAXFREQ / 64) - : (PCIMINFREQ / 64); - else - return max_freq ? (XTALMAXFREQ / 32) - : (XTALMINFREQ / 32); - } else if (ai_get_ccrev(sih) < 10) { - div = 4 * - (((bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)) & - SCC_CD_MASK) >> SCC_CD_SHIFT) + 1); - if (slowclk == SCC_SS_LPO) - return max_freq ? LPOMAXFREQ : LPOMINFREQ; - else if (slowclk == SCC_SS_XTAL) - return max_freq ? (XTALMAXFREQ / div) - : (XTALMINFREQ / div); - else if (slowclk == SCC_SS_PCI) - return max_freq ? (PCIMAXFREQ / div) - : (PCIMINFREQ / div); - } else { - /* Chipc rev 10 is InstaClock */ - div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl)); - div = 4 * ((div >> SYCC_CD_SHIFT) + 1); - return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div); - } - return 0; + /* Chipc rev 10 is InstaClock */ + div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl)); + div = 4 * ((div >> SYCC_CD_SHIFT) + 1); + return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div); } static void @@ -831,8 +682,7 @@ ai_clkctl_setdelay(struct si_pub *sih, struct bcma_device *cc) /* Starting with 4318 it is ILP that is used for the delays */ slowmaxfreq = - ai_slowclk_freq(sih, - (ai_get_ccrev(sih) >= 10) ? false : true, cc); + ai_slowclk_freq(sih, false, cc); pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000; fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; @@ -854,9 +704,8 @@ void ai_clkctl_init(struct si_pub *sih) return; /* set all Instaclk chip ILP to 1 MHz */ - if (ai_get_ccrev(sih) >= 10) - bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK, - (ILP_DIV_1MHZ << SYCC_CD_SHIFT)); + bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK, + (ILP_DIV_1MHZ << SYCC_CD_SHIFT)); ai_clkctl_setdelay(sih, cc); } @@ -891,140 +740,6 @@ u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih) return fpdelay; } -/* turn primary xtal and/or pll off/on */ -int ai_clkctl_xtal(struct si_pub *sih, uint what, bool on) -{ - struct si_info *sii; - u32 in, out, outen; - - sii = (struct si_info *)sih; - - /* pcie core doesn't have any mapping to control the xtal pu */ - if (PCIE(sih)) - return -1; - - pci_read_config_dword(sii->pcibus, PCI_GPIO_IN, &in); - pci_read_config_dword(sii->pcibus, PCI_GPIO_OUT, &out); - pci_read_config_dword(sii->pcibus, PCI_GPIO_OUTEN, &outen); - - /* - * Avoid glitching the clock if GPRS is already using it. - * We can't actually read the state of the PLLPD so we infer it - * by the value of XTAL_PU which *is* readable via gpioin. - */ - if (on && (in & PCI_CFG_GPIO_XTAL)) - return 0; - - if (what & XTAL) - outen |= PCI_CFG_GPIO_XTAL; - if (what & PLL) - outen |= PCI_CFG_GPIO_PLL; - - if (on) { - /* turn primary xtal on */ - if (what & XTAL) { - out |= PCI_CFG_GPIO_XTAL; - if (what & PLL) - out |= PCI_CFG_GPIO_PLL; - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUT, out); - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUTEN, outen); - udelay(XTAL_ON_DELAY); - } - - /* turn pll on */ - if (what & PLL) { - out &= ~PCI_CFG_GPIO_PLL; - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUT, out); - mdelay(2); - } - } else { - if (what & XTAL) - out &= ~PCI_CFG_GPIO_XTAL; - if (what & PLL) - out |= PCI_CFG_GPIO_PLL; - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUT, out); - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUTEN, outen); - } - - return 0; -} - -/* clk control mechanism through chipcommon, no policy checking */ -static bool _ai_clkctl_cc(struct si_info *sii, uint mode) -{ - struct bcma_device *cc; - u32 scc; - - /* chipcommon cores prior to rev6 don't support dynamic clock control */ - if (ai_get_ccrev(&sii->pub) < 6) - return false; - - cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0); - - if (!(ai_get_cccaps(&sii->pub) & CC_CAP_PWR_CTL) && - (ai_get_ccrev(&sii->pub) < 20)) - return mode == CLK_FAST; - - switch (mode) { - case CLK_FAST: /* FORCEHT, fast (pll) clock */ - if (ai_get_ccrev(&sii->pub) < 10) { - /* - * don't forget to force xtal back - * on before we clear SCC_DYN_XTAL.. - */ - ai_clkctl_xtal(&sii->pub, XTAL, ON); - bcma_maskset32(cc, CHIPCREGOFFS(slow_clk_ctl), - (SCC_XC | SCC_FS | SCC_IP), SCC_IP); - } else if (ai_get_ccrev(&sii->pub) < 20) { - bcma_set32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_HR); - } else { - bcma_set32(cc, CHIPCREGOFFS(clk_ctl_st), CCS_FORCEHT); - } - - /* wait for the PLL */ - if (ai_get_cccaps(&sii->pub) & CC_CAP_PMU) { - u32 htavail = CCS_HTAVAIL; - SPINWAIT(((bcma_read32(cc, CHIPCREGOFFS(clk_ctl_st)) & - htavail) == 0), PMU_MAX_TRANSITION_DLY); - } else { - udelay(PLL_DELAY); - } - break; - - case CLK_DYNAMIC: /* enable dynamic clock control */ - if (ai_get_ccrev(&sii->pub) < 10) { - scc = bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)); - scc &= ~(SCC_FS | SCC_IP | SCC_XC); - if ((scc & SCC_SS_MASK) != SCC_SS_XTAL) - scc |= SCC_XC; - bcma_write32(cc, CHIPCREGOFFS(slow_clk_ctl), scc); - - /* - * for dynamic control, we have to - * release our xtal_pu "force on" - */ - if (scc & SCC_XC) - ai_clkctl_xtal(&sii->pub, XTAL, OFF); - } else if (ai_get_ccrev(&sii->pub) < 20) { - /* Instaclock */ - bcma_mask32(cc, CHIPCREGOFFS(system_clk_ctl), ~SYCC_HR); - } else { - bcma_mask32(cc, CHIPCREGOFFS(clk_ctl_st), ~CCS_FORCEHT); - } - break; - - default: - break; - } - - return mode == CLK_FAST; -} - /* * clock control policy function throught chipcommon * @@ -1033,133 +748,53 @@ static bool _ai_clkctl_cc(struct si_info *sii, uint mode) * this is a wrapper over the next internal function * to allow flexible policy settings for outside caller */ -bool ai_clkctl_cc(struct si_pub *sih, uint mode) +bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode) { struct si_info *sii; + struct bcma_device *cc; sii = (struct si_info *)sih; - /* chipcommon cores prior to rev6 don't support dynamic clock control */ - if (ai_get_ccrev(sih) < 6) - return false; - if (PCI_FORCEHT(sih)) - return mode == CLK_FAST; + return mode == BCMA_CLKMODE_FAST; - return _ai_clkctl_cc(sii, mode); + cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0); + bcma_core_set_clockmode(cc, mode); + return mode == BCMA_CLKMODE_FAST; } void ai_pci_up(struct si_pub *sih) { struct si_info *sii; + struct bcma_device *cc; sii = (struct si_info *)sih; - if (PCI_FORCEHT(sih)) - _ai_clkctl_cc(sii, CLK_FAST); + if (PCI_FORCEHT(sih)) { + cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0); + bcma_core_set_clockmode(cc, BCMA_CLKMODE_FAST); + } if (PCIE(sih)) - pcicore_up(sii->pch, SI_PCIUP); - -} - -/* Unconfigure and/or apply various WARs when system is going to sleep mode */ -void ai_pci_sleep(struct si_pub *sih) -{ - struct si_info *sii; - - sii = (struct si_info *)sih; - - pcicore_sleep(sii->pch); + bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, true); } /* Unconfigure and/or apply various WARs when going down */ void ai_pci_down(struct si_pub *sih) { struct si_info *sii; + struct bcma_device *cc; sii = (struct si_info *)sih; /* release FORCEHT since chip is going to "down" state */ - if (PCI_FORCEHT(sih)) - _ai_clkctl_cc(sii, CLK_DYNAMIC); - - pcicore_down(sii->pch, SI_PCIDOWN); -} - -/* - * Configure the pci core for pci client (NIC) action - * coremask is the bitvec of cores by index to be enabled. - */ -void ai_pci_setup(struct si_pub *sih, uint coremask) -{ - struct si_info *sii; - u32 w; - - sii = (struct si_info *)sih; - - /* - * Enable sb->pci interrupts. Assume - * PCI rev 2.3 support was added in pci core rev 6 and things changed.. - */ - if (PCIE(sih) || (PCI(sih) && (ai_get_buscorerev(sih) >= 6))) { - /* pci config write to set this core bit in PCIIntMask */ - pci_read_config_dword(sii->pcibus, PCI_INT_MASK, &w); - w |= (coremask << PCI_SBIM_SHIFT); - pci_write_config_dword(sii->pcibus, PCI_INT_MASK, w); - } - - if (PCI(sih)) { - pcicore_pci_setup(sii->pch); + if (PCI_FORCEHT(sih)) { + cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0); + bcma_core_set_clockmode(cc, BCMA_CLKMODE_DYNAMIC); } -} -/* - * Fixup SROMless PCI device's configuration. - * The current core may be changed upon return. - */ -int ai_pci_fixcfg(struct si_pub *sih) -{ - struct si_info *sii = (struct si_info *)sih; - - /* Fixup PI in SROM shadow area to enable the correct PCI core access */ - /* check 'pi' is correct and fix it if not */ - pcicore_fixcfg(sii->pch); - pcicore_hwup(sii->pch); - return 0; -} - -/* mask&set gpiocontrol bits */ -u32 ai_gpiocontrol(struct si_pub *sih, u32 mask, u32 val, u8 priority) -{ - uint regoff; - - regoff = offsetof(struct chipcregs, gpiocontrol); - return ai_cc_reg(sih, regoff, mask, val); -} - -void ai_chipcontrl_epa4331(struct si_pub *sih, bool on) -{ - struct bcma_device *cc; - u32 val; - - cc = ai_findcore(sih, CC_CORE_ID, 0); - - if (on) { - if (ai_get_chippkg(sih) == 9 || ai_get_chippkg(sih) == 0xb) - /* Ext PA Controls for 4331 12x9 Package */ - bcma_set32(cc, CHIPCREGOFFS(chipcontrol), - CCTRL4331_EXTPA_EN | - CCTRL4331_EXTPA_ON_GPIO2_5); - else - /* Ext PA Controls for 4331 12x12 Package */ - bcma_set32(cc, CHIPCREGOFFS(chipcontrol), - CCTRL4331_EXTPA_EN); - } else { - val &= ~(CCTRL4331_EXTPA_EN | CCTRL4331_EXTPA_ON_GPIO2_5); - bcma_mask32(cc, CHIPCREGOFFS(chipcontrol), - ~(CCTRL4331_EXTPA_EN | CCTRL4331_EXTPA_ON_GPIO2_5)); - } + if (PCIE(sih)) + bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, false); } /* Enable BT-COEX & Ex-PA for 4313 */ @@ -1181,6 +816,9 @@ bool ai_deviceremoved(struct si_pub *sih) sii = (struct si_info *)sih; + if (sii->icbus->hosttype != BCMA_HOSTTYPE_PCI) + return false; + pci_read_config_dword(sii->pcibus, PCI_VENDOR_ID, &w); if ((w & 0xFFFF) != PCI_VENDOR_ID_BROADCOM) return true; @@ -1188,45 +826,6 @@ bool ai_deviceremoved(struct si_pub *sih) return false; } -bool ai_is_sprom_available(struct si_pub *sih) -{ - struct si_info *sii = (struct si_info *)sih; - - if (ai_get_ccrev(sih) >= 31) { - struct bcma_device *cc; - u32 sromctrl; - - if ((ai_get_cccaps(sih) & CC_CAP_SROM) == 0) - return false; - - cc = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0); - sromctrl = bcma_read32(cc, CHIPCREGOFFS(sromcontrol)); - return sromctrl & SRC_PRESENT; - } - - switch (ai_get_chip_id(sih)) { - case BCM4313_CHIP_ID: - return (sii->chipst & CST4313_SPROM_PRESENT) != 0; - default: - return true; - } -} - -bool ai_is_otp_disabled(struct si_pub *sih) -{ - struct si_info *sii = (struct si_info *)sih; - - switch (ai_get_chip_id(sih)) { - case BCM4313_CHIP_ID: - return (sii->chipst & CST4313_OTP_PRESENT) == 0; - /* These chips always have their OTP on */ - case BCM43224_CHIP_ID: - case BCM43225_CHIP_ID: - default: - return false; - } -} - uint ai_get_buscoretype(struct si_pub *sih) { struct si_info *sii = (struct si_info *)sih; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h index f84c6f7..d9f04a6 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h @@ -113,10 +113,6 @@ #define XTAL 0x1 /* primary crystal oscillator (2050) */ #define PLL 0x2 /* main chip pll */ -/* clkctl clk mode */ -#define CLK_FAST 0 /* force fast (pll) clock */ -#define CLK_DYNAMIC 2 /* enable dynamic clock control */ - /* GPIO usage priorities */ #define GPIO_DRV_PRIORITY 0 /* Driver */ #define GPIO_APP_PRIORITY 1 /* Application */ @@ -172,9 +168,7 @@ struct si_info { struct si_pub pub; /* back plane public state (must be first) */ struct bcma_bus *icbus; /* handle to soc interconnect bus */ struct pci_dev *pcibus; /* handle to pci bus */ - struct pcicore_info *pch; /* PCI/E core handle */ struct bcma_device *buscore; - struct list_head var_list; /* list of srom variables */ u32 chipst; /* chip status */ }; @@ -197,38 +191,20 @@ extern u32 ai_core_cflags(struct bcma_device *core, u32 mask, u32 val); extern struct si_pub *ai_attach(struct bcma_bus *pbus); extern void ai_detach(struct si_pub *sih); extern uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val); -extern void ai_pci_setup(struct si_pub *sih, uint coremask); extern void ai_clkctl_init(struct si_pub *sih); extern u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih); extern bool ai_clkctl_cc(struct si_pub *sih, uint mode); -extern int ai_clkctl_xtal(struct si_pub *sih, uint what, bool on); extern bool ai_deviceremoved(struct si_pub *sih); -extern u32 ai_gpiocontrol(struct si_pub *sih, u32 mask, u32 val, - u8 priority); - -/* OTP status */ -extern bool ai_is_otp_disabled(struct si_pub *sih); - -/* SPROM availability */ -extern bool ai_is_sprom_available(struct si_pub *sih); -extern void ai_pci_sleep(struct si_pub *sih); extern void ai_pci_down(struct si_pub *sih); extern void ai_pci_up(struct si_pub *sih); -extern int ai_pci_fixcfg(struct si_pub *sih); -extern void ai_chipcontrl_epa4331(struct si_pub *sih, bool on); /* Enable Ex-PA for 4313 */ extern void ai_epa_4313war(struct si_pub *sih); extern uint ai_get_buscoretype(struct si_pub *sih); extern uint ai_get_buscorerev(struct si_pub *sih); -static inline int ai_get_ccrev(struct si_pub *sih) -{ - return sih->ccrev; -} - static inline u32 ai_get_cccaps(struct si_pub *sih) { return sih->cccaps; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/antsel.c b/drivers/net/wireless/brcm80211/brcmsmac/antsel.c index a47ce25..55e12c3 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/antsel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/antsel.c @@ -108,7 +108,7 @@ brcms_c_antsel_init_cfg(struct antsel_info *asi, struct brcms_antselcfg *antsel, struct antsel_info *brcms_c_antsel_attach(struct brcms_c_info *wlc) { struct antsel_info *asi; - struct si_pub *sih = wlc->hw->sih; + struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom; asi = kzalloc(sizeof(struct antsel_info), GFP_ATOMIC); if (!asi) @@ -118,7 +118,7 @@ struct antsel_info *brcms_c_antsel_attach(struct brcms_c_info *wlc) asi->pub = wlc->pub; asi->antsel_type = ANTSEL_NA; asi->antsel_avail = false; - asi->antsel_antswitch = (u8) getintvar(sih, BRCMS_SROM_ANTSWITCH); + asi->antsel_antswitch = sprom->antswitch; if ((asi->pub->sromrev >= 4) && (asi->antsel_antswitch != 0)) { switch (asi->antsel_antswitch) { @@ -128,12 +128,12 @@ struct antsel_info *brcms_c_antsel_attach(struct brcms_c_info *wlc) /* 4321/2 board with 2x3 switch logic */ asi->antsel_type = ANTSEL_2x3; /* Antenna selection availability */ - if (((u16) getintvar(sih, BRCMS_SROM_AA2G) == 7) || - ((u16) getintvar(sih, BRCMS_SROM_AA5G) == 7)) { + if ((sprom->ant_available_bg == 7) || + (sprom->ant_available_a == 7)) { asi->antsel_avail = true; } else if ( - (u16) getintvar(sih, BRCMS_SROM_AA2G) == 3 || - (u16) getintvar(sih, BRCMS_SROM_AA5G) == 3) { + sprom->ant_available_bg == 3 || + sprom->ant_available_a == 3) { asi->antsel_avail = false; } else { asi->antsel_avail = false; @@ -146,8 +146,8 @@ struct antsel_info *brcms_c_antsel_attach(struct brcms_c_info *wlc) break; } } else if ((asi->pub->sromrev == 4) && - ((u16) getintvar(sih, BRCMS_SROM_AA2G) == 7) && - ((u16) getintvar(sih, BRCMS_SROM_AA5G) == 0)) { + (sprom->ant_available_bg == 7) && + (sprom->ant_available_a == 0)) { /* hack to match old 4321CB2 cards with 2of3 antenna switch */ asi->antsel_type = ANTSEL_2x3; asi->antsel_avail = true; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index 0efe88e..eb77ac3 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -1110,7 +1110,7 @@ struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc) char country_abbrev[BRCM_CNTRY_BUF_SZ]; const struct country_info *country; struct brcms_pub *pub = wlc->pub; - char *ccode; + struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom; BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit); @@ -1122,9 +1122,8 @@ struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc) wlc->cmi = wlc_cm; /* store the country code for passing up as a regulatory hint */ - ccode = getvar(wlc->hw->sih, BRCMS_SROM_CCODE); - if (ccode && brcms_c_country_valid(ccode)) - strncpy(wlc->pub->srom_ccode, ccode, BRCM_CNTRY_BUF_SZ - 1); + if (sprom->alpha2 && brcms_c_country_valid(sprom->alpha2)) + strncpy(wlc->pub->srom_ccode, sprom->alpha2, sizeof(sprom->alpha2)); /* * internal country information which must match diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index aa15558..50f92a0 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -25,7 +25,6 @@ #include <linux/bcma/bcma.h> #include <net/mac80211.h> #include <defs.h> -#include "nicpci.h" #include "phy/phy_int.h" #include "d11.h" #include "channel.h" @@ -770,7 +769,7 @@ void brcms_dpc(unsigned long data) * Precondition: Since this function is called in brcms_pci_probe() context, * no locking is required. */ -static int brcms_request_fw(struct brcms_info *wl, struct pci_dev *pdev) +static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev) { int status; struct device *device = &pdev->dev; @@ -1022,7 +1021,7 @@ static struct brcms_info *brcms_attach(struct bcma_device *pdev) spin_lock_init(&wl->isr_lock); /* prepare ucode */ - if (brcms_request_fw(wl, pdev->bus->host_pci) < 0) { + if (brcms_request_fw(wl, pdev) < 0) { wiphy_err(wl->wiphy, "%s: Failed to find firmware usually in " "%s\n", KBUILD_MODNAME, "/lib/firmware/brcm"); brcms_release_fw(wl); @@ -1043,12 +1042,12 @@ static struct brcms_info *brcms_attach(struct bcma_device *pdev) wl->pub->ieee_hw = hw; /* register our interrupt handler */ - if (request_irq(pdev->bus->host_pci->irq, brcms_isr, + if (request_irq(pdev->irq, brcms_isr, IRQF_SHARED, KBUILD_MODNAME, wl)) { wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit); goto fail; } - wl->irq = pdev->bus->host_pci->irq; + wl->irq = pdev->irq; /* register module */ brcms_c_module_register(wl->pub, "linux", wl, NULL); @@ -1098,7 +1097,7 @@ static int __devinit brcms_bcma_probe(struct bcma_device *pdev) dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n", pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class, - pdev->bus->host_pci->irq); + pdev->irq); if ((pdev->id.manuf != BCMA_MANUF_BCM) || (pdev->id.id != BCMA_CORE_80211)) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index b4d9279..19db405 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -1219,7 +1219,7 @@ static void brcms_b_wait_for_wake(struct brcms_hardware *wlc_hw) } /* control chip clock to save power, enable dynamic clock or force fast clock */ -static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, uint mode) +static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, enum bcma_clkmode mode) { if (ai_get_cccaps(wlc_hw->sih) & CC_CAP_PMU) { /* new chips with PMU, CCS_FORCEHT will distribute the HT clock @@ -1229,7 +1229,7 @@ static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, uint mode) */ if (wlc_hw->clk) { - if (mode == CLK_FAST) { + if (mode == BCMA_CLKMODE_FAST) { bcma_set32(wlc_hw->d11core, D11REGOFFS(clk_ctl_st), CCS_FORCEHT); @@ -1260,7 +1260,7 @@ static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, uint mode) ~CCS_FORCEHT); } } - wlc_hw->forcefastclk = (mode == CLK_FAST); + wlc_hw->forcefastclk = (mode == BCMA_CLKMODE_FAST); } else { /* old chips w/o PMU, force HT through cc, @@ -1567,7 +1567,7 @@ void brcms_b_bw_set(struct brcms_hardware *wlc_hw, u16 bw) /* request FAST clock if not on */ fastclk = wlc_hw->forcefastclk; if (!fastclk) - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); wlc_phy_bw_state_set(wlc_hw->band->pi, bw); @@ -1576,7 +1576,7 @@ void brcms_b_bw_set(struct brcms_hardware *wlc_hw, u16 bw) /* restore the clk */ if (!fastclk) - brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC); } static void brcms_b_upd_synthpu(struct brcms_hardware *wlc_hw) @@ -1882,27 +1882,20 @@ static bool brcms_c_validboardtype(struct brcms_hardware *wlc_hw) return true; } -static char *brcms_c_get_macaddr(struct brcms_hardware *wlc_hw) +static void brcms_c_get_macaddr(struct brcms_hardware *wlc_hw, u8 etheraddr[ETH_ALEN]) { - enum brcms_srom_id var_id = BRCMS_SROM_MACADDR; - char *macaddr; + struct ssb_sprom *sprom = &wlc_hw->d11core->bus->sprom; /* If macaddr exists, use it (Sromrev4, CIS, ...). */ - macaddr = getvar(wlc_hw->sih, var_id); - if (macaddr != NULL) - return macaddr; + if (!is_zero_ether_addr(sprom->il0mac)) { + memcpy(etheraddr, sprom->il0mac, 6); + return; + } if (wlc_hw->_nbands > 1) - var_id = BRCMS_SROM_ET1MACADDR; + memcpy(etheraddr, sprom->et1mac, 6); else - var_id = BRCMS_SROM_IL0MACADDR; - - macaddr = getvar(wlc_hw->sih, var_id); - if (macaddr == NULL) - wiphy_err(wlc_hw->wlc->wiphy, "wl%d: wlc_get_macaddr: macaddr " - "getvar(%d) not found\n", wlc_hw->unit, var_id); - - return macaddr; + memcpy(etheraddr, sprom->il0mac, 6); } /* power both the pll and external oscillator on/off */ @@ -1917,9 +1910,6 @@ static void brcms_b_xtal(struct brcms_hardware *wlc_hw, bool want) if (!want && wlc_hw->pllreq) return; - if (wlc_hw->sih) - ai_clkctl_xtal(wlc_hw->sih, XTAL | PLL, want); - wlc_hw->sbclk = want; if (!wlc_hw->sbclk) { wlc_hw->clk = false; @@ -2004,7 +1994,7 @@ void brcms_b_corereset(struct brcms_hardware *wlc_hw, u32 flags) /* request FAST clock if not on */ fastclk = wlc_hw->forcefastclk; if (!fastclk) - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); /* reset the dma engines except first time thru */ if (bcma_core_is_enabled(wlc_hw->d11core)) { @@ -2053,7 +2043,7 @@ void brcms_b_corereset(struct brcms_hardware *wlc_hw, u32 flags) brcms_c_mctrl_reset(wlc_hw); if (ai_get_cccaps(wlc_hw->sih) & CC_CAP_PMU) - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); brcms_b_phy_reset(wlc_hw); @@ -2065,7 +2055,7 @@ void brcms_b_corereset(struct brcms_hardware *wlc_hw, u32 flags) /* restore the clk setting */ if (!fastclk) - brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC); } /* txfifo sizes needs to be modified(increased) since the newer cores @@ -2218,7 +2208,7 @@ static void brcms_c_gpio_init(struct brcms_c_info *wlc) gm |= gc |= BOARD_GPIO_PACTRL; /* apply to gpiocontrol register */ - ai_gpiocontrol(wlc_hw->sih, gm, gc, GPIO_DRV_PRIORITY); + bcma_chipco_gpio_control(&wlc_hw->d11core->bus->drv_cc, gm, gc); } static void brcms_ucode_write(struct brcms_hardware *wlc_hw, @@ -3371,7 +3361,7 @@ static brcms_b_init(struct brcms_hardware *wlc_hw, u16 chanspec) { /* request FAST clock if not on */ fastclk = wlc_hw->forcefastclk; if (!fastclk) - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); /* disable interrupts */ macintmask = brcms_intrsoff(wlc->wl); @@ -3405,7 +3395,7 @@ static brcms_b_init(struct brcms_hardware *wlc_hw, u16 chanspec) { /* restore the clk */ if (!fastclk) - brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC); } static void brcms_c_set_phy_chanspec(struct brcms_c_info *wlc, @@ -4436,17 +4426,22 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, uint unit, bool piomode) { struct brcms_hardware *wlc_hw; - char *macaddr = NULL; uint err = 0; uint j; bool wme = false; struct shared_phy_params sha_params; struct wiphy *wiphy = wlc->wiphy; struct pci_dev *pcidev = core->bus->host_pci; + struct ssb_sprom *sprom = &core->bus->sprom; - BCMMSG(wlc->wiphy, "wl%d: vendor 0x%x device 0x%x\n", unit, - pcidev->vendor, - pcidev->device); + if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) + BCMMSG(wlc->wiphy, "wl%d: vendor 0x%x device 0x%x\n", unit, + pcidev->vendor, + pcidev->device); + else + BCMMSG(wlc->wiphy, "wl%d: vendor 0x%x device 0x%x\n", unit, + core->bus->boardinfo.vendor, + core->bus->boardinfo.type); wme = true; @@ -4472,7 +4467,8 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, } /* verify again the device is supported */ - if (!brcms_c_chipmatch(pcidev->vendor, pcidev->device)) { + if (core->bus->hosttype == BCMA_HOSTTYPE_PCI && + !brcms_c_chipmatch(pcidev->vendor, pcidev->device)) { wiphy_err(wiphy, "wl%d: brcms_b_attach: Unsupported " "vendor/device (0x%x/0x%x)\n", unit, pcidev->vendor, pcidev->device); @@ -4480,8 +4476,13 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, goto fail; } - wlc_hw->vendorid = pcidev->vendor; - wlc_hw->deviceid = pcidev->device; + if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) { + wlc_hw->vendorid = pcidev->vendor; + wlc_hw->deviceid = pcidev->device; + } else { + wlc_hw->vendorid = core->bus->boardinfo.vendor; + wlc_hw->deviceid = core->bus->boardinfo.type; + } wlc_hw->d11core = core; wlc_hw->corerev = core->id.rev; @@ -4501,7 +4502,7 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, * is still false; But it will be called again inside wlc_corereset, * after d11 is out of reset. */ - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS); if (!brcms_b_validate_chip_access(wlc_hw)) { @@ -4512,7 +4513,7 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, } /* get the board rev, used just below */ - j = getintvar(wlc_hw->sih, BRCMS_SROM_BOARDREV); + j = sprom->board_rev; /* promote srom boardrev of 0xFF to 1 */ if (j == BOARDREV_PROMOTABLE) j = BOARDREV_PROMOTED; @@ -4525,11 +4526,9 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, err = 15; goto fail; } - wlc_hw->sromrev = (u8) getintvar(wlc_hw->sih, BRCMS_SROM_REV); - wlc_hw->boardflags = (u32) getintvar(wlc_hw->sih, - BRCMS_SROM_BOARDFLAGS); - wlc_hw->boardflags2 = (u32) getintvar(wlc_hw->sih, - BRCMS_SROM_BOARDFLAGS2); + wlc_hw->sromrev = sprom->revision; + wlc_hw->boardflags = sprom->boardflags_lo + (sprom->boardflags_hi << 16); + wlc_hw->boardflags2 = sprom->boardflags2_lo + (sprom->boardflags2_hi << 16); if (wlc_hw->boardflags & BFL_NOPLLDOWN) brcms_b_pllreq(wlc_hw, true, BRCMS_PLLREQ_SHARED); @@ -4702,25 +4701,18 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core, */ /* init etheraddr state variables */ - macaddr = brcms_c_get_macaddr(wlc_hw); - if (macaddr == NULL) { - wiphy_err(wiphy, "wl%d: brcms_b_attach: macaddr not found\n", - unit); - err = 21; - goto fail; - } - if (!mac_pton(macaddr, wlc_hw->etheraddr) || - is_broadcast_ether_addr(wlc_hw->etheraddr) || + brcms_c_get_macaddr(wlc_hw, wlc_hw->etheraddr); + + if (is_broadcast_ether_addr(wlc_hw->etheraddr) || is_zero_ether_addr(wlc_hw->etheraddr)) { - wiphy_err(wiphy, "wl%d: brcms_b_attach: bad macaddr %s\n", - unit, macaddr); + wiphy_err(wiphy, "wl%d: brcms_b_attach: bad macaddr\n", + unit); err = 22; goto fail; } - BCMMSG(wlc->wiphy, "deviceid 0x%x nbands %d board 0x%x macaddr: %s\n", - wlc_hw->deviceid, wlc_hw->_nbands, ai_get_boardtype(wlc_hw->sih), - macaddr); + BCMMSG(wlc->wiphy, "deviceid 0x%x nbands %d board 0x%x\n", + wlc_hw->deviceid, wlc_hw->_nbands, ai_get_boardtype(wlc_hw->sih)); return err; @@ -4770,16 +4762,16 @@ static bool brcms_c_attach_stf_ant_init(struct brcms_c_info *wlc) int aa; uint unit; int bandtype; - struct si_pub *sih = wlc->hw->sih; + struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom; unit = wlc->pub->unit; bandtype = wlc->band->bandtype; /* get antennas available */ if (bandtype == BRCM_BAND_5G) - aa = (s8) getintvar(sih, BRCMS_SROM_AA5G); + aa = sprom->ant_available_a; else - aa = (s8) getintvar(sih, BRCMS_SROM_AA2G); + aa = sprom->ant_available_bg; if ((aa < 1) || (aa > 15)) { wiphy_err(wlc->wiphy, "wl%d: %s: Invalid antennas available in" @@ -4799,9 +4791,9 @@ static bool brcms_c_attach_stf_ant_init(struct brcms_c_info *wlc) /* Compute Antenna Gain */ if (bandtype == BRCM_BAND_5G) - wlc->band->antgain = (s8) getintvar(sih, BRCMS_SROM_AG1); + wlc->band->antgain = sprom->antenna_gain.a1; else - wlc->band->antgain = (s8) getintvar(sih, BRCMS_SROM_AG0); + wlc->band->antgain = sprom->antenna_gain.a0; brcms_c_attach_antgain_init(wlc); @@ -4952,15 +4944,6 @@ static int brcms_b_detach(struct brcms_c_info *wlc) callbacks = 0; - if (wlc_hw->sih) { - /* - * detach interrupt sync mechanism since interrupt is disabled - * and per-port interrupt object may has been freed. this must - * be done before sb core switch - */ - ai_pci_sleep(wlc_hw->sih); - } - brcms_b_detach_dmapio(wlc_hw); band = wlc_hw->band; @@ -5047,9 +5030,7 @@ static void brcms_b_hw_up(struct brcms_hardware *wlc_hw) */ brcms_b_xtal(wlc_hw, ON); ai_clkctl_init(wlc_hw->sih); - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); - - ai_pci_fixcfg(wlc_hw->sih); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); /* * TODO: test suspend/resume @@ -5078,8 +5059,6 @@ static void brcms_b_hw_up(struct brcms_hardware *wlc_hw) static int brcms_b_up_prep(struct brcms_hardware *wlc_hw) { - uint coremask; - BCMMSG(wlc_hw->wlc->wiphy, "wl%d\n", wlc_hw->unit); /* @@ -5088,15 +5067,14 @@ static int brcms_b_up_prep(struct brcms_hardware *wlc_hw) */ brcms_b_xtal(wlc_hw, ON); ai_clkctl_init(wlc_hw->sih); - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); /* * Configure pci/pcmcia here instead of in brcms_c_attach() * to allow mfg hotswap: down, hotswap (chip power cycle), up. */ - coremask = (1 << wlc_hw->wlc->core->coreidx); - - ai_pci_setup(wlc_hw->sih, coremask); + bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci, wlc_hw->d11core, + true); /* * Need to read the hwradio status here to cover the case where the @@ -5126,7 +5104,7 @@ static int brcms_b_up_finish(struct brcms_hardware *wlc_hw) wlc_phy_hw_state_upd(wlc_hw->band->pi, true); /* FULLY enable dynamic power control and d11 core interrupt */ - brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC); brcms_intrson(wlc_hw->wlc->wl); return 0; } @@ -5267,7 +5245,7 @@ static int brcms_b_bmac_down_prep(struct brcms_hardware *wlc_hw) brcms_intrsoff(wlc_hw->wlc->wl); /* ensure we're running on the pll clock again */ - brcms_b_clkctl_clk(wlc_hw, CLK_FAST); + brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST); } /* down phy at the last of this stage */ callbacks += wlc_phy_down(wlc_hw->band->pi); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/nicpci.c b/drivers/net/wireless/brcm80211/brcmsmac/nicpci.c deleted file mode 100644 index 7fad6dc..0000000 --- a/drivers/net/wireless/brcm80211/brcmsmac/nicpci.c +++ /dev/null @@ -1,826 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/pci.h> - -#include <defs.h> -#include <soc.h> -#include <chipcommon.h> -#include "aiutils.h" -#include "pub.h" -#include "nicpci.h" - -/* SPROM offsets */ -#define SRSH_ASPM_OFFSET 4 /* word 4 */ -#define SRSH_ASPM_ENB 0x18 /* bit 3, 4 */ -#define SRSH_ASPM_L1_ENB 0x10 /* bit 4 */ -#define SRSH_ASPM_L0s_ENB 0x8 /* bit 3 */ - -#define SRSH_PCIE_MISC_CONFIG 5 /* word 5 */ -#define SRSH_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */ -#define SRSH_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */ -#define SRSH_CLKREQ_ENB 0x0800 /* bit 11 */ -#define SRSH_BD_OFFSET 6 /* word 6 */ - -/* chipcontrol */ -#define CHIPCTRL_4321_PLL_DOWN 0x800000/* serdes PLL down override */ - -/* MDIO control */ -#define MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ -#define MDIOCTL_DIVISOR_VAL 0x2 -#define MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ -#define MDIOCTL_ACCESS_DONE 0x100 /* Transaction complete */ - -/* MDIO Data */ -#define MDIODATA_MASK 0x0000ffff /* data 2 bytes */ -#define MDIODATA_TA 0x00020000 /* Turnaround */ - -#define MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ -#define MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ -#define MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ -#define MDIODATA_DEVADDR_MASK 0x0f800000 - /* Physmedia devaddr Mask */ - -/* MDIO Data for older revisions < 10 */ -#define MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift */ -#define MDIODATA_REGADDR_MASK_OLD 0x003c0000 - /* Regaddr Mask */ -#define MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift */ -#define MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 - /* Physmedia devaddr Mask */ - -/* Transactions flags */ -#define MDIODATA_WRITE 0x10000000 -#define MDIODATA_READ 0x20000000 -#define MDIODATA_START 0x40000000 - -#define MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ -#define MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ - -/* serdes regs (rev < 10) */ -#define MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ -#define MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ -#define MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ - -/* SERDES RX registers */ -#define SERDES_RX_CTRL 1 /* Rx cntrl */ -#define SERDES_RX_TIMER1 2 /* Rx Timer1 */ -#define SERDES_RX_CDR 6 /* CDR */ -#define SERDES_RX_CDRBW 7 /* CDR BW */ -/* SERDES RX control register */ -#define SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ -#define SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ - -/* SERDES PLL registers */ -#define SERDES_PLL_CTRL 1 /* PLL control reg */ -#define PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ - -/* Linkcontrol reg offset in PCIE Cap */ -#define PCIE_CAP_LINKCTRL_OFFSET 16 /* offset in pcie cap */ -#define PCIE_CAP_LCREG_ASPML0s 0x01 /* ASPM L0s in linkctrl */ -#define PCIE_CAP_LCREG_ASPML1 0x02 /* ASPM L1 in linkctrl */ -#define PCIE_CLKREQ_ENAB 0x100 /* CLKREQ Enab in linkctrl */ - -#define PCIE_ASPM_ENAB 3 /* ASPM L0s & L1 in linkctrl */ -#define PCIE_ASPM_L1_ENAB 2 /* ASPM L0s & L1 in linkctrl */ -#define PCIE_ASPM_L0s_ENAB 1 /* ASPM L0s & L1 in linkctrl */ -#define PCIE_ASPM_DISAB 0 /* ASPM L0s & L1 in linkctrl */ - -/* Power management threshold */ -#define PCIE_L1THRESHOLDTIME_MASK 0xFF00 /* bits 8 - 15 */ -#define PCIE_L1THRESHOLDTIME_SHIFT 8 /* PCIE_L1THRESHOLDTIME_SHIFT */ -#define PCIE_L1THRESHOLD_WARVAL 0x72 /* WAR value */ -#define PCIE_ASPMTIMER_EXTEND 0x01000000 - /* > rev7: - * enable extend ASPM timer - */ - -/* different register spaces to access thru pcie indirect access */ -#define PCIE_CONFIGREGS 1 /* Access to config space */ -#define PCIE_PCIEREGS 2 /* Access to pcie registers */ - -/* PCIE protocol PHY diagnostic registers */ -#define PCIE_PLP_STATUSREG 0x204 /* Status */ - -/* Status reg PCIE_PLP_STATUSREG */ -#define PCIE_PLP_POLARITYINV_STAT 0x10 - -/* PCIE protocol DLLP diagnostic registers */ -#define PCIE_DLLP_LCREG 0x100 /* Link Control */ -#define PCIE_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ - -/* PCIE protocol TLP diagnostic registers */ -#define PCIE_TLP_WORKAROUNDSREG 0x004 /* TLP Workarounds */ - -/* Sonics to PCI translation types */ -#define SBTOPCI_PREF 0x4 /* prefetch enable */ -#define SBTOPCI_BURST 0x8 /* burst enable */ -#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */ - -#define PCI_CLKRUN_DSBL 0x8000 /* Bit 15 forceClkrun */ - -/* PCI core index in SROM shadow area */ -#define SRSH_PI_OFFSET 0 /* first word */ -#define SRSH_PI_MASK 0xf000 /* bit 15:12 */ -#define SRSH_PI_SHIFT 12 /* bit 15:12 */ - -#define PCIREGOFFS(field) offsetof(struct sbpciregs, field) -#define PCIEREGOFFS(field) offsetof(struct sbpcieregs, field) - -/* Sonics side: PCI core and host control registers */ -struct sbpciregs { - u32 control; /* PCI control */ - u32 PAD[3]; - u32 arbcontrol; /* PCI arbiter control */ - u32 clkrun; /* Clkrun Control (>=rev11) */ - u32 PAD[2]; - u32 intstatus; /* Interrupt status */ - u32 intmask; /* Interrupt mask */ - u32 sbtopcimailbox; /* Sonics to PCI mailbox */ - u32 PAD[9]; - u32 bcastaddr; /* Sonics broadcast address */ - u32 bcastdata; /* Sonics broadcast data */ - u32 PAD[2]; - u32 gpioin; /* ro: gpio input (>=rev2) */ - u32 gpioout; /* rw: gpio output (>=rev2) */ - u32 gpioouten; /* rw: gpio output enable (>= rev2) */ - u32 gpiocontrol; /* rw: gpio control (>= rev2) */ - u32 PAD[36]; - u32 sbtopci0; /* Sonics to PCI translation 0 */ - u32 sbtopci1; /* Sonics to PCI translation 1 */ - u32 sbtopci2; /* Sonics to PCI translation 2 */ - u32 PAD[189]; - u32 pcicfg[4][64]; /* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */ - u16 sprom[36]; /* SPROM shadow Area */ - u32 PAD[46]; -}; - -/* SB side: PCIE core and host control registers */ -struct sbpcieregs { - u32 control; /* host mode only */ - u32 PAD[2]; - u32 biststatus; /* bist Status: 0x00C */ - u32 gpiosel; /* PCIE gpio sel: 0x010 */ - u32 gpioouten; /* PCIE gpio outen: 0x14 */ - u32 PAD[2]; - u32 intstatus; /* Interrupt status: 0x20 */ - u32 intmask; /* Interrupt mask: 0x24 */ - u32 sbtopcimailbox; /* sb to pcie mailbox: 0x028 */ - u32 PAD[53]; - u32 sbtopcie0; /* sb to pcie translation 0: 0x100 */ - u32 sbtopcie1; /* sb to pcie translation 1: 0x104 */ - u32 sbtopcie2; /* sb to pcie translation 2: 0x108 */ - u32 PAD[5]; - - /* pcie core supports in direct access to config space */ - u32 configaddr; /* pcie config space access: Address field: 0x120 */ - u32 configdata; /* pcie config space access: Data field: 0x124 */ - - /* mdio access to serdes */ - u32 mdiocontrol; /* controls the mdio access: 0x128 */ - u32 mdiodata; /* Data to the mdio access: 0x12c */ - - /* pcie protocol phy/dllp/tlp register indirect access mechanism */ - u32 pcieindaddr; /* indirect access to - * the internal register: 0x130 - */ - u32 pcieinddata; /* Data to/from the internal regsiter: 0x134 */ - - u32 clkreqenctrl; /* >= rev 6, Clkreq rdma control : 0x138 */ - u32 PAD[177]; - u32 pciecfg[4][64]; /* 0x400 - 0x7FF, PCIE Cfg Space */ - u16 sprom[64]; /* SPROM shadow Area */ -}; - -struct pcicore_info { - struct bcma_device *core; - struct si_pub *sih; /* System interconnect handle */ - struct pci_dev *dev; - u8 pciecap_lcreg_offset;/* PCIE capability LCreg offset - * in the config space - */ - bool pcie_pr42767; - u8 pcie_polarity; - u8 pcie_war_aspm_ovr; /* Override ASPM/Clkreq settings */ - - u8 pmecap_offset; /* PM Capability offset in the config space */ - bool pmecap; /* Capable of generating PME */ -}; - -#define PCIE_ASPM(sih) \ - ((ai_get_buscoretype(sih) == PCIE_CORE_ID) && \ - ((ai_get_buscorerev(sih) >= 3) && \ - (ai_get_buscorerev(sih) <= 5))) - - -/* delay needed between the mdio control/ mdiodata register data access */ -static void pr28829_delay(void) -{ - udelay(10); -} - -/* Initialize the PCI core. - * It's caller's responsibility to make sure that this is done only once - */ -struct pcicore_info *pcicore_init(struct si_pub *sih, struct bcma_device *core) -{ - struct pcicore_info *pi; - - /* alloc struct pcicore_info */ - pi = kzalloc(sizeof(struct pcicore_info), GFP_ATOMIC); - if (pi == NULL) - return NULL; - - pi->sih = sih; - pi->dev = core->bus->host_pci; - pi->core = core; - - if (core->id.id == PCIE_CORE_ID) { - u8 cap_ptr; - cap_ptr = pcicore_find_pci_capability(pi->dev, PCI_CAP_ID_EXP, - NULL, NULL); - pi->pciecap_lcreg_offset = cap_ptr + PCIE_CAP_LINKCTRL_OFFSET; - } - return pi; -} - -void pcicore_deinit(struct pcicore_info *pch) -{ - kfree(pch); -} - -/* return cap_offset if requested capability exists in the PCI config space */ -/* Note that it's caller's responsibility to make sure it's a pci bus */ -u8 -pcicore_find_pci_capability(struct pci_dev *dev, u8 req_cap_id, - unsigned char *buf, u32 *buflen) -{ - u8 cap_id; - u8 cap_ptr = 0; - u32 bufsize; - u8 byte_val; - - /* check for Header type 0 */ - pci_read_config_byte(dev, PCI_HEADER_TYPE, &byte_val); - if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) - goto end; - - /* check if the capability pointer field exists */ - pci_read_config_byte(dev, PCI_STATUS, &byte_val); - if (!(byte_val & PCI_STATUS_CAP_LIST)) - goto end; - - pci_read_config_byte(dev, PCI_CAPABILITY_LIST, &cap_ptr); - /* check if the capability pointer is 0x00 */ - if (cap_ptr == 0x00) - goto end; - - /* loop thru the capability list - * and see if the pcie capability exists - */ - - pci_read_config_byte(dev, cap_ptr, &cap_id); - - while (cap_id != req_cap_id) { - pci_read_config_byte(dev, cap_ptr + 1, &cap_ptr); - if (cap_ptr == 0x00) - break; - pci_read_config_byte(dev, cap_ptr, &cap_id); - } - if (cap_id != req_cap_id) - goto end; - - /* found the caller requested capability */ - if (buf != NULL && buflen != NULL) { - u8 cap_data; - - bufsize = *buflen; - if (!bufsize) - goto end; - *buflen = 0; - /* copy the capability data excluding cap ID and next ptr */ - cap_data = cap_ptr + 2; - if ((bufsize + cap_data) > PCI_SZPCR) - bufsize = PCI_SZPCR - cap_data; - *buflen = bufsize; - while (bufsize--) { - pci_read_config_byte(dev, cap_data, buf); - cap_data++; - buf++; - } - } -end: - return cap_ptr; -} - -/* ***** Register Access API */ -static uint -pcie_readreg(struct bcma_device *core, uint addrtype, uint offset) -{ - uint retval = 0xFFFFFFFF; - - switch (addrtype) { - case PCIE_CONFIGREGS: - bcma_write32(core, PCIEREGOFFS(configaddr), offset); - (void)bcma_read32(core, PCIEREGOFFS(configaddr)); - retval = bcma_read32(core, PCIEREGOFFS(configdata)); - break; - case PCIE_PCIEREGS: - bcma_write32(core, PCIEREGOFFS(pcieindaddr), offset); - (void)bcma_read32(core, PCIEREGOFFS(pcieindaddr)); - retval = bcma_read32(core, PCIEREGOFFS(pcieinddata)); - break; - } - - return retval; -} - -static uint pcie_writereg(struct bcma_device *core, uint addrtype, - uint offset, uint val) -{ - switch (addrtype) { - case PCIE_CONFIGREGS: - bcma_write32(core, PCIEREGOFFS(configaddr), offset); - bcma_write32(core, PCIEREGOFFS(configdata), val); - break; - case PCIE_PCIEREGS: - bcma_write32(core, PCIEREGOFFS(pcieindaddr), offset); - bcma_write32(core, PCIEREGOFFS(pcieinddata), val); - break; - default: - break; - } - return 0; -} - -static bool pcie_mdiosetblock(struct pcicore_info *pi, uint blk) -{ - uint mdiodata, i = 0; - uint pcie_serdes_spinwait = 200; - - mdiodata = (MDIODATA_START | MDIODATA_WRITE | MDIODATA_TA | - (MDIODATA_DEV_ADDR << MDIODATA_DEVADDR_SHF) | - (MDIODATA_BLK_ADDR << MDIODATA_REGADDR_SHF) | - (blk << 4)); - bcma_write32(pi->core, PCIEREGOFFS(mdiodata), mdiodata); - - pr28829_delay(); - /* retry till the transaction is complete */ - while (i < pcie_serdes_spinwait) { - if (bcma_read32(pi->core, PCIEREGOFFS(mdiocontrol)) & - MDIOCTL_ACCESS_DONE) - break; - - udelay(1000); - i++; - } - - if (i >= pcie_serdes_spinwait) - return false; - - return true; -} - -static int -pcie_mdioop(struct pcicore_info *pi, uint physmedia, uint regaddr, bool write, - uint *val) -{ - uint mdiodata; - uint i = 0; - uint pcie_serdes_spinwait = 10; - - /* enable mdio access to SERDES */ - bcma_write32(pi->core, PCIEREGOFFS(mdiocontrol), - MDIOCTL_PREAM_EN | MDIOCTL_DIVISOR_VAL); - - if (ai_get_buscorerev(pi->sih) >= 10) { - /* new serdes is slower in rw, - * using two layers of reg address mapping - */ - if (!pcie_mdiosetblock(pi, physmedia)) - return 1; - mdiodata = ((MDIODATA_DEV_ADDR << MDIODATA_DEVADDR_SHF) | - (regaddr << MDIODATA_REGADDR_SHF)); - pcie_serdes_spinwait *= 20; - } else { - mdiodata = ((physmedia << MDIODATA_DEVADDR_SHF_OLD) | - (regaddr << MDIODATA_REGADDR_SHF_OLD)); - } - - if (!write) - mdiodata |= (MDIODATA_START | MDIODATA_READ | MDIODATA_TA); - else - mdiodata |= (MDIODATA_START | MDIODATA_WRITE | MDIODATA_TA | - *val); - - bcma_write32(pi->core, PCIEREGOFFS(mdiodata), mdiodata); - - pr28829_delay(); - - /* retry till the transaction is complete */ - while (i < pcie_serdes_spinwait) { - if (bcma_read32(pi->core, PCIEREGOFFS(mdiocontrol)) & - MDIOCTL_ACCESS_DONE) { - if (!write) { - pr28829_delay(); - *val = (bcma_read32(pi->core, - PCIEREGOFFS(mdiodata)) & - MDIODATA_MASK); - } - /* Disable mdio access to SERDES */ - bcma_write32(pi->core, PCIEREGOFFS(mdiocontrol), 0); - return 0; - } - udelay(1000); - i++; - } - - /* Timed out. Disable mdio access to SERDES. */ - bcma_write32(pi->core, PCIEREGOFFS(mdiocontrol), 0); - return 1; -} - -/* use the mdio interface to read from mdio slaves */ -static int -pcie_mdioread(struct pcicore_info *pi, uint physmedia, uint regaddr, - uint *regval) -{ - return pcie_mdioop(pi, physmedia, regaddr, false, regval); -} - -/* use the mdio interface to write to mdio slaves */ -static int -pcie_mdiowrite(struct pcicore_info *pi, uint physmedia, uint regaddr, uint val) -{ - return pcie_mdioop(pi, physmedia, regaddr, true, &val); -} - -/* ***** Support functions ***** */ -static u8 pcie_clkreq(struct pcicore_info *pi, u32 mask, u32 val) -{ - u32 reg_val; - u8 offset; - - offset = pi->pciecap_lcreg_offset; - if (!offset) - return 0; - - pci_read_config_dword(pi->dev, offset, ®_val); - /* set operation */ - if (mask) { - if (val) - reg_val |= PCIE_CLKREQ_ENAB; - else - reg_val &= ~PCIE_CLKREQ_ENAB; - pci_write_config_dword(pi->dev, offset, reg_val); - pci_read_config_dword(pi->dev, offset, ®_val); - } - if (reg_val & PCIE_CLKREQ_ENAB) - return 1; - else - return 0; -} - -static void pcie_extendL1timer(struct pcicore_info *pi, bool extend) -{ - u32 w; - struct si_pub *sih = pi->sih; - - if (ai_get_buscoretype(sih) != PCIE_CORE_ID || - ai_get_buscorerev(sih) < 7) - return; - - w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG); - if (extend) - w |= PCIE_ASPMTIMER_EXTEND; - else - w &= ~PCIE_ASPMTIMER_EXTEND; - pcie_writereg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG, w); - w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG); -} - -/* centralized clkreq control policy */ -static void pcie_clkreq_upd(struct pcicore_info *pi, uint state) -{ - struct si_pub *sih = pi->sih; - - switch (state) { - case SI_DOATTACH: - if (PCIE_ASPM(sih)) - pcie_clkreq(pi, 1, 0); - break; - case SI_PCIDOWN: - /* turn on serdes PLL down */ - if (ai_get_buscorerev(sih) == 6) { - ai_cc_reg(sih, - offsetof(struct chipcregs, chipcontrol_addr), - ~0, 0); - ai_cc_reg(sih, - offsetof(struct chipcregs, chipcontrol_data), - ~0x40, 0); - } else if (pi->pcie_pr42767) { - pcie_clkreq(pi, 1, 1); - } - break; - case SI_PCIUP: - /* turn off serdes PLL down */ - if (ai_get_buscorerev(sih) == 6) { - ai_cc_reg(sih, - offsetof(struct chipcregs, chipcontrol_addr), - ~0, 0); - ai_cc_reg(sih, - offsetof(struct chipcregs, chipcontrol_data), - ~0x40, 0x40); - } else if (PCIE_ASPM(sih)) { /* disable clkreq */ - pcie_clkreq(pi, 1, 0); - } - break; - } -} - -/* ***** PCI core WARs ***** */ -/* Done only once at attach time */ -static void pcie_war_polarity(struct pcicore_info *pi) -{ - u32 w; - - if (pi->pcie_polarity != 0) - return; - - w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_PLP_STATUSREG); - - /* Detect the current polarity at attach and force that polarity and - * disable changing the polarity - */ - if ((w & PCIE_PLP_POLARITYINV_STAT) == 0) - pi->pcie_polarity = SERDES_RX_CTRL_FORCE; - else - pi->pcie_polarity = (SERDES_RX_CTRL_FORCE | - SERDES_RX_CTRL_POLARITY); -} - -/* enable ASPM and CLKREQ if srom doesn't have it */ -/* Needs to happen when update to shadow SROM is needed - * : Coming out of 'standby'/'hibernate' - * : If pcie_war_aspm_ovr state changed - */ -static void pcie_war_aspm_clkreq(struct pcicore_info *pi) -{ - struct si_pub *sih = pi->sih; - u16 val16; - u32 w; - - if (!PCIE_ASPM(sih)) - return; - - /* bypass this on QT or VSIM */ - val16 = bcma_read16(pi->core, PCIEREGOFFS(sprom[SRSH_ASPM_OFFSET])); - - val16 &= ~SRSH_ASPM_ENB; - if (pi->pcie_war_aspm_ovr == PCIE_ASPM_ENAB) - val16 |= SRSH_ASPM_ENB; - else if (pi->pcie_war_aspm_ovr == PCIE_ASPM_L1_ENAB) - val16 |= SRSH_ASPM_L1_ENB; - else if (pi->pcie_war_aspm_ovr == PCIE_ASPM_L0s_ENAB) - val16 |= SRSH_ASPM_L0s_ENB; - - bcma_write16(pi->core, PCIEREGOFFS(sprom[SRSH_ASPM_OFFSET]), val16); - - pci_read_config_dword(pi->dev, pi->pciecap_lcreg_offset, &w); - w &= ~PCIE_ASPM_ENAB; - w |= pi->pcie_war_aspm_ovr; - pci_write_config_dword(pi->dev, pi->pciecap_lcreg_offset, w); - - val16 = bcma_read16(pi->core, - PCIEREGOFFS(sprom[SRSH_CLKREQ_OFFSET_REV5])); - - if (pi->pcie_war_aspm_ovr != PCIE_ASPM_DISAB) { - val16 |= SRSH_CLKREQ_ENB; - pi->pcie_pr42767 = true; - } else - val16 &= ~SRSH_CLKREQ_ENB; - - bcma_write16(pi->core, PCIEREGOFFS(sprom[SRSH_CLKREQ_OFFSET_REV5]), - val16); -} - -/* Apply the polarity determined at the start */ -/* Needs to happen when coming out of 'standby'/'hibernate' */ -static void pcie_war_serdes(struct pcicore_info *pi) -{ - u32 w = 0; - - if (pi->pcie_polarity != 0) - pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CTRL, - pi->pcie_polarity); - - pcie_mdioread(pi, MDIODATA_DEV_PLL, SERDES_PLL_CTRL, &w); - if (w & PLL_CTRL_FREQDET_EN) { - w &= ~PLL_CTRL_FREQDET_EN; - pcie_mdiowrite(pi, MDIODATA_DEV_PLL, SERDES_PLL_CTRL, w); - } -} - -/* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */ -/* Needs to happen when coming out of 'standby'/'hibernate' */ -static void pcie_misc_config_fixup(struct pcicore_info *pi) -{ - u16 val16; - - val16 = bcma_read16(pi->core, - PCIEREGOFFS(sprom[SRSH_PCIE_MISC_CONFIG])); - - if ((val16 & SRSH_L23READY_EXIT_NOPERST) == 0) { - val16 |= SRSH_L23READY_EXIT_NOPERST; - bcma_write16(pi->core, - PCIEREGOFFS(sprom[SRSH_PCIE_MISC_CONFIG]), val16); - } -} - -/* quick hack for testing */ -/* Needs to happen when coming out of 'standby'/'hibernate' */ -static void pcie_war_noplldown(struct pcicore_info *pi) -{ - /* turn off serdes PLL down */ - ai_cc_reg(pi->sih, offsetof(struct chipcregs, chipcontrol), - CHIPCTRL_4321_PLL_DOWN, CHIPCTRL_4321_PLL_DOWN); - - /* clear srom shadow backdoor */ - bcma_write16(pi->core, PCIEREGOFFS(sprom[SRSH_BD_OFFSET]), 0); -} - -/* Needs to happen when coming out of 'standby'/'hibernate' */ -static void pcie_war_pci_setup(struct pcicore_info *pi) -{ - struct si_pub *sih = pi->sih; - u32 w; - - if (ai_get_buscorerev(sih) == 0 || ai_get_buscorerev(sih) == 1) { - w = pcie_readreg(pi->core, PCIE_PCIEREGS, - PCIE_TLP_WORKAROUNDSREG); - w |= 0x8; - pcie_writereg(pi->core, PCIE_PCIEREGS, - PCIE_TLP_WORKAROUNDSREG, w); - } - - if (ai_get_buscorerev(sih) == 1) { - w = pcie_readreg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_LCREG); - w |= 0x40; - pcie_writereg(pi->core, PCIE_PCIEREGS, PCIE_DLLP_LCREG, w); - } - - if (ai_get_buscorerev(sih) == 0) { - pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_TIMER1, 0x8128); - pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CDR, 0x0100); - pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CDRBW, 0x1466); - } else if (PCIE_ASPM(sih)) { - /* Change the L1 threshold for better performance */ - w = pcie_readreg(pi->core, PCIE_PCIEREGS, - PCIE_DLLP_PMTHRESHREG); - w &= ~PCIE_L1THRESHOLDTIME_MASK; - w |= PCIE_L1THRESHOLD_WARVAL << PCIE_L1THRESHOLDTIME_SHIFT; - pcie_writereg(pi->core, PCIE_PCIEREGS, - PCIE_DLLP_PMTHRESHREG, w); - - pcie_war_serdes(pi); - - pcie_war_aspm_clkreq(pi); - } else if (ai_get_buscorerev(pi->sih) == 7) - pcie_war_noplldown(pi); - - /* Note that the fix is actually in the SROM, - * that's why this is open-ended - */ - if (ai_get_buscorerev(pi->sih) >= 6) - pcie_misc_config_fixup(pi); -} - -/* ***** Functions called during driver state changes ***** */ -void pcicore_attach(struct pcicore_info *pi, int state) -{ - struct si_pub *sih = pi->sih; - u32 bfl2 = (u32)getintvar(sih, BRCMS_SROM_BOARDFLAGS2); - - /* Determine if this board needs override */ - if (PCIE_ASPM(sih)) { - if (bfl2 & BFL2_PCIEWAR_OVR) - pi->pcie_war_aspm_ovr = PCIE_ASPM_DISAB; - else - pi->pcie_war_aspm_ovr = PCIE_ASPM_ENAB; - } - - /* These need to happen in this order only */ - pcie_war_polarity(pi); - - pcie_war_serdes(pi); - - pcie_war_aspm_clkreq(pi); - - pcie_clkreq_upd(pi, state); - -} - -void pcicore_hwup(struct pcicore_info *pi) -{ - if (!pi || ai_get_buscoretype(pi->sih) != PCIE_CORE_ID) - return; - - pcie_war_pci_setup(pi); -} - -void pcicore_up(struct pcicore_info *pi, int state) -{ - if (!pi || ai_get_buscoretype(pi->sih) != PCIE_CORE_ID) - return; - - /* Restore L1 timer for better performance */ - pcie_extendL1timer(pi, true); - - pcie_clkreq_upd(pi, state); -} - -/* When the device is going to enter D3 state - * (or the system is going to enter S3/S4 states) - */ -void pcicore_sleep(struct pcicore_info *pi) -{ - u32 w; - - if (!pi || !PCIE_ASPM(pi->sih)) - return; - - pci_read_config_dword(pi->dev, pi->pciecap_lcreg_offset, &w); - w &= ~PCIE_CAP_LCREG_ASPML1; - pci_write_config_dword(pi->dev, pi->pciecap_lcreg_offset, w); - - pi->pcie_pr42767 = false; -} - -void pcicore_down(struct pcicore_info *pi, int state) -{ - if (!pi || ai_get_buscoretype(pi->sih) != PCIE_CORE_ID) - return; - - pcie_clkreq_upd(pi, state); - - /* Reduce L1 timer for better power savings */ - pcie_extendL1timer(pi, false); -} - -void pcicore_fixcfg(struct pcicore_info *pi) -{ - struct bcma_device *core = pi->core; - u16 val16; - uint regoff; - - switch (pi->core->id.id) { - case BCMA_CORE_PCI: - regoff = PCIREGOFFS(sprom[SRSH_PI_OFFSET]); - break; - - case BCMA_CORE_PCIE: - regoff = PCIEREGOFFS(sprom[SRSH_PI_OFFSET]); - break; - - default: - return; - } - - val16 = bcma_read16(pi->core, regoff); - if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != - (u16)core->core_index) { - val16 = ((u16)core->core_index << SRSH_PI_SHIFT) | - (val16 & ~SRSH_PI_MASK); - bcma_write16(pi->core, regoff, val16); - } -} - -/* precondition: current core is pci core */ -void -pcicore_pci_setup(struct pcicore_info *pi) -{ - bcma_set32(pi->core, PCIREGOFFS(sbtopci2), - SBTOPCI_PREF | SBTOPCI_BURST); - - if (pi->core->id.rev >= 11) { - bcma_set32(pi->core, PCIREGOFFS(sbtopci2), - SBTOPCI_RC_READMULTI); - bcma_set32(pi->core, PCIREGOFFS(clkrun), PCI_CLKRUN_DSBL); - (void)bcma_read32(pi->core, PCIREGOFFS(clkrun)); - } -} diff --git a/drivers/net/wireless/brcm80211/brcmsmac/nicpci.h b/drivers/net/wireless/brcm80211/brcmsmac/nicpci.h deleted file mode 100644 index 9fc3ead..0000000 --- a/drivers/net/wireless/brcm80211/brcmsmac/nicpci.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _BRCM_NICPCI_H_ -#define _BRCM_NICPCI_H_ - -#include "types.h" - -/* PCI configuration address space size */ -#define PCI_SZPCR 256 - -/* Brcm PCI configuration registers */ -/* backplane address space accessed by BAR0 */ -#define PCI_BAR0_WIN 0x80 -/* sprom property control */ -#define PCI_SPROM_CONTROL 0x88 -/* mask of PCI and other cores interrupts */ -#define PCI_INT_MASK 0x94 -/* backplane core interrupt mask bits offset */ -#define PCI_SBIM_SHIFT 8 -/* backplane address space accessed by second 4KB of BAR0 */ -#define PCI_BAR0_WIN2 0xac -/* pci config space gpio input (>=rev3) */ -#define PCI_GPIO_IN 0xb0 -/* pci config space gpio output (>=rev3) */ -#define PCI_GPIO_OUT 0xb4 -/* pci config space gpio output enable (>=rev3) */ -#define PCI_GPIO_OUTEN 0xb8 - -/* bar0 + 4K accesses external sprom */ -#define PCI_BAR0_SPROM_OFFSET (4 * 1024) -/* bar0 + 6K accesses pci core registers */ -#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) -/* - * pci core SB registers are at the end of the - * 8KB window, so their address is the "regular" - * address plus 4K - */ -#define PCI_BAR0_PCISBR_OFFSET (4 * 1024) -/* bar0 window size Match with corerev 13 */ -#define PCI_BAR0_WINSZ (16 * 1024) -/* On pci corerev >= 13 and all pcie, the bar0 is now 16KB and it maps: */ -/* bar0 + 8K accesses pci/pcie core registers */ -#define PCI_16KB0_PCIREGS_OFFSET (8 * 1024) -/* bar0 + 12K accesses chipc core registers */ -#define PCI_16KB0_CCREGS_OFFSET (12 * 1024) - -struct sbpciregs; -struct sbpcieregs; - -extern struct pcicore_info *pcicore_init(struct si_pub *sih, - struct bcma_device *core); -extern void pcicore_deinit(struct pcicore_info *pch); -extern void pcicore_attach(struct pcicore_info *pch, int state); -extern void pcicore_hwup(struct pcicore_info *pch); -extern void pcicore_up(struct pcicore_info *pch, int state); -extern void pcicore_sleep(struct pcicore_info *pch); -extern void pcicore_down(struct pcicore_info *pch, int state); -extern u8 pcicore_find_pci_capability(struct pci_dev *dev, u8 req_cap_id, - unsigned char *buf, u32 *buflen); -extern void pcicore_fixcfg(struct pcicore_info *pch); -extern void pcicore_pci_setup(struct pcicore_info *pch); - -#endif /* _BRCM_NICPCI_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmsmac/otp.c b/drivers/net/wireless/brcm80211/brcmsmac/otp.c deleted file mode 100644 index f1ca126..0000000 --- a/drivers/net/wireless/brcm80211/brcmsmac/otp.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/string.h> - -#include <brcm_hw_ids.h> -#include <chipcommon.h> -#include "aiutils.h" -#include "otp.h" - -#define OTPS_GUP_MASK 0x00000f00 -#define OTPS_GUP_SHIFT 8 -/* h/w subregion is programmed */ -#define OTPS_GUP_HW 0x00000100 -/* s/w subregion is programmed */ -#define OTPS_GUP_SW 0x00000200 -/* chipid/pkgopt subregion is programmed */ -#define OTPS_GUP_CI 0x00000400 -/* fuse subregion is programmed */ -#define OTPS_GUP_FUSE 0x00000800 - -/* Fields in otpprog in rev >= 21 */ -#define OTPP_COL_MASK 0x000000ff -#define OTPP_COL_SHIFT 0 -#define OTPP_ROW_MASK 0x0000ff00 -#define OTPP_ROW_SHIFT 8 -#define OTPP_OC_MASK 0x0f000000 -#define OTPP_OC_SHIFT 24 -#define OTPP_READERR 0x10000000 -#define OTPP_VALUE_MASK 0x20000000 -#define OTPP_VALUE_SHIFT 29 -#define OTPP_START_BUSY 0x80000000 -#define OTPP_READ 0x40000000 - -/* Opcodes for OTPP_OC field */ -#define OTPPOC_READ 0 -#define OTPPOC_BIT_PROG 1 -#define OTPPOC_VERIFY 3 -#define OTPPOC_INIT 4 -#define OTPPOC_SET 5 -#define OTPPOC_RESET 6 -#define OTPPOC_OCST 7 -#define OTPPOC_ROW_LOCK 8 -#define OTPPOC_PRESCN_TEST 9 - -#define OTPTYPE_IPX(ccrev) ((ccrev) == 21 || (ccrev) >= 23) - -#define OTPP_TRIES 10000000 /* # of tries for OTPP */ - -#define MAXNUMRDES 9 /* Maximum OTP redundancy entries */ - -/* Fixed size subregions sizes in words */ -#define OTPGU_CI_SZ 2 - -struct otpinfo; - -/* OTP function struct */ -struct otp_fn_s { - int (*init)(struct si_pub *sih, struct otpinfo *oi); - int (*read_region)(struct otpinfo *oi, int region, u16 *data, - uint *wlen); -}; - -struct otpinfo { - struct bcma_device *core; /* chipc core */ - const struct otp_fn_s *fn; /* OTP functions */ - struct si_pub *sih; /* Saved sb handle */ - - /* IPX OTP section */ - u16 wsize; /* Size of otp in words */ - u16 rows; /* Geometry */ - u16 cols; /* Geometry */ - u32 status; /* Flag bits (lock/prog/rv). - * (Reflected only when OTP is power cycled) - */ - u16 hwbase; /* hardware subregion offset */ - u16 hwlim; /* hardware subregion boundary */ - u16 swbase; /* software subregion offset */ - u16 swlim; /* software subregion boundary */ - u16 fbase; /* fuse subregion offset */ - u16 flim; /* fuse subregion boundary */ - int otpgu_base; /* offset to General Use Region */ -}; - -/* OTP layout */ -/* CC revs 21, 24 and 27 OTP General Use Region word offset */ -#define REVA4_OTPGU_BASE 12 - -/* CC revs 23, 25, 26, 28 and above OTP General Use Region word offset */ -#define REVB8_OTPGU_BASE 20 - -/* CC rev 36 OTP General Use Region word offset */ -#define REV36_OTPGU_BASE 12 - -/* Subregion word offsets in General Use region */ -#define OTPGU_HSB_OFF 0 -#define OTPGU_SFB_OFF 1 -#define OTPGU_CI_OFF 2 -#define OTPGU_P_OFF 3 -#define OTPGU_SROM_OFF 4 - -/* Flag bit offsets in General Use region */ -#define OTPGU_HWP_OFF 60 -#define OTPGU_SWP_OFF 61 -#define OTPGU_CIP_OFF 62 -#define OTPGU_FUSEP_OFF 63 -#define OTPGU_CIP_MSK 0x4000 -#define OTPGU_P_MSK 0xf000 -#define OTPGU_P_SHIFT (OTPGU_HWP_OFF % 16) - -/* OTP Size */ -#define OTP_SZ_FU_324 ((roundup(324, 8))/8) /* 324 bits */ -#define OTP_SZ_FU_288 (288/8) /* 288 bits */ -#define OTP_SZ_FU_216 (216/8) /* 216 bits */ -#define OTP_SZ_FU_72 (72/8) /* 72 bits */ -#define OTP_SZ_CHECKSUM (16/8) /* 16 bits */ -#define OTP4315_SWREG_SZ 178 /* 178 bytes */ -#define OTP_SZ_FU_144 (144/8) /* 144 bits */ - -static u16 -ipxotp_otpr(struct otpinfo *oi, uint wn) -{ - return bcma_read16(oi->core, - CHIPCREGOFFS(sromotp[wn])); -} - -/* - * Calculate max HW/SW region byte size by subtracting fuse region - * and checksum size, osizew is oi->wsize (OTP size - GU size) in words - */ -static int ipxotp_max_rgnsz(struct si_pub *sih, int osizew) -{ - int ret = 0; - - switch (ai_get_chip_id(sih)) { - case BCM43224_CHIP_ID: - case BCM43225_CHIP_ID: - ret = osizew * 2 - OTP_SZ_FU_72 - OTP_SZ_CHECKSUM; - break; - case BCM4313_CHIP_ID: - ret = osizew * 2 - OTP_SZ_FU_72 - OTP_SZ_CHECKSUM; - break; - default: - break; /* Don't know about this chip */ - } - - return ret; -} - -static void _ipxotp_init(struct otpinfo *oi) -{ - uint k; - u32 otpp, st; - int ccrev = ai_get_ccrev(oi->sih); - - - /* - * record word offset of General Use Region - * for various chipcommon revs - */ - if (ccrev == 21 || ccrev == 24 - || ccrev == 27) { - oi->otpgu_base = REVA4_OTPGU_BASE; - } else if (ccrev == 36) { - /* - * OTP size greater than equal to 2KB (128 words), - * otpgu_base is similar to rev23 - */ - if (oi->wsize >= 128) - oi->otpgu_base = REVB8_OTPGU_BASE; - else - oi->otpgu_base = REV36_OTPGU_BASE; - } else if (ccrev == 23 || ccrev >= 25) { - oi->otpgu_base = REVB8_OTPGU_BASE; - } - - /* First issue an init command so the status is up to date */ - otpp = - OTPP_START_BUSY | ((OTPPOC_INIT << OTPP_OC_SHIFT) & OTPP_OC_MASK); - - bcma_write32(oi->core, CHIPCREGOFFS(otpprog), otpp); - st = bcma_read32(oi->core, CHIPCREGOFFS(otpprog)); - for (k = 0; (st & OTPP_START_BUSY) && (k < OTPP_TRIES); k++) - st = bcma_read32(oi->core, CHIPCREGOFFS(otpprog)); - if (k >= OTPP_TRIES) - return; - - /* Read OTP lock bits and subregion programmed indication bits */ - oi->status = bcma_read32(oi->core, CHIPCREGOFFS(otpstatus)); - - if ((ai_get_chip_id(oi->sih) == BCM43224_CHIP_ID) - || (ai_get_chip_id(oi->sih) == BCM43225_CHIP_ID)) { - u32 p_bits; - p_bits = (ipxotp_otpr(oi, oi->otpgu_base + OTPGU_P_OFF) & - OTPGU_P_MSK) >> OTPGU_P_SHIFT; - oi->status |= (p_bits << OTPS_GUP_SHIFT); - } - - /* - * h/w region base and fuse region limit are fixed to - * the top and the bottom of the general use region. - * Everything else can be flexible. - */ - oi->hwbase = oi->otpgu_base + OTPGU_SROM_OFF; - oi->hwlim = oi->wsize; - if (oi->status & OTPS_GUP_HW) { - oi->hwlim = - ipxotp_otpr(oi, oi->otpgu_base + OTPGU_HSB_OFF) / 16; - oi->swbase = oi->hwlim; - } else - oi->swbase = oi->hwbase; - - /* subtract fuse and checksum from beginning */ - oi->swlim = ipxotp_max_rgnsz(oi->sih, oi->wsize) / 2; - - if (oi->status & OTPS_GUP_SW) { - oi->swlim = - ipxotp_otpr(oi, oi->otpgu_base + OTPGU_SFB_OFF) / 16; - oi->fbase = oi->swlim; - } else - oi->fbase = oi->swbase; - - oi->flim = oi->wsize; -} - -static int ipxotp_init(struct si_pub *sih, struct otpinfo *oi) -{ - /* Make sure we're running IPX OTP */ - if (!OTPTYPE_IPX(ai_get_ccrev(sih))) - return -EBADE; - - /* Make sure OTP is not disabled */ - if (ai_is_otp_disabled(sih)) - return -EBADE; - - /* Check for otp size */ - switch ((ai_get_cccaps(sih) & CC_CAP_OTPSIZE) >> CC_CAP_OTPSIZE_SHIFT) { - case 0: - /* Nothing there */ - return -EBADE; - case 1: /* 32x64 */ - oi->rows = 32; - oi->cols = 64; - oi->wsize = 128; - break; - case 2: /* 64x64 */ - oi->rows = 64; - oi->cols = 64; - oi->wsize = 256; - break; - case 5: /* 96x64 */ - oi->rows = 96; - oi->cols = 64; - oi->wsize = 384; - break; - case 7: /* 16x64 *//* 1024 bits */ - oi->rows = 16; - oi->cols = 64; - oi->wsize = 64; - break; - default: - /* Don't know the geometry */ - return -EBADE; - } - - /* Retrieve OTP region info */ - _ipxotp_init(oi); - return 0; -} - -static int -ipxotp_read_region(struct otpinfo *oi, int region, u16 *data, uint *wlen) -{ - uint base, i, sz; - - /* Validate region selection */ - switch (region) { - case OTP_HW_RGN: - sz = (uint) oi->hwlim - oi->hwbase; - if (!(oi->status & OTPS_GUP_HW)) { - *wlen = sz; - return -ENODATA; - } - if (*wlen < sz) { - *wlen = sz; - return -EOVERFLOW; - } - base = oi->hwbase; - break; - case OTP_SW_RGN: - sz = ((uint) oi->swlim - oi->swbase); - if (!(oi->status & OTPS_GUP_SW)) { - *wlen = sz; - return -ENODATA; - } - if (*wlen < sz) { - *wlen = sz; - return -EOVERFLOW; - } - base = oi->swbase; - break; - case OTP_CI_RGN: - sz = OTPGU_CI_SZ; - if (!(oi->status & OTPS_GUP_CI)) { - *wlen = sz; - return -ENODATA; - } - if (*wlen < sz) { - *wlen = sz; - return -EOVERFLOW; - } - base = oi->otpgu_base + OTPGU_CI_OFF; - break; - case OTP_FUSE_RGN: - sz = (uint) oi->flim - oi->fbase; - if (!(oi->status & OTPS_GUP_FUSE)) { - *wlen = sz; - return -ENODATA; - } - if (*wlen < sz) { - *wlen = sz; - return -EOVERFLOW; - } - base = oi->fbase; - break; - case OTP_ALL_RGN: - sz = ((uint) oi->flim - oi->hwbase); - if (!(oi->status & (OTPS_GUP_HW | OTPS_GUP_SW))) { - *wlen = sz; - return -ENODATA; - } - if (*wlen < sz) { - *wlen = sz; - return -EOVERFLOW; - } - base = oi->hwbase; - break; - default: - return -EINVAL; - } - - /* Read the data */ - for (i = 0; i < sz; i++) - data[i] = ipxotp_otpr(oi, base + i); - - *wlen = sz; - return 0; -} - -static const struct otp_fn_s ipxotp_fn = { - (int (*)(struct si_pub *, struct otpinfo *)) ipxotp_init, - (int (*)(struct otpinfo *, int, u16 *, uint *)) ipxotp_read_region, -}; - -static int otp_init(struct si_pub *sih, struct otpinfo *oi) -{ - int ret; - - memset(oi, 0, sizeof(struct otpinfo)); - - oi->core = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0); - - if (OTPTYPE_IPX(ai_get_ccrev(sih))) - oi->fn = &ipxotp_fn; - - if (oi->fn == NULL) - return -EBADE; - - oi->sih = sih; - - ret = (oi->fn->init)(sih, oi); - - return ret; -} - -int -otp_read_region(struct si_pub *sih, int region, u16 *data, uint *wlen) { - struct otpinfo otpinfo; - struct otpinfo *oi = &otpinfo; - int err = 0; - - if (ai_is_otp_disabled(sih)) { - err = -EPERM; - goto out; - } - - err = otp_init(sih, oi); - if (err) - goto out; - - err = ((oi)->fn->read_region)(oi, region, data, wlen); - - out: - return err; -} diff --git a/drivers/net/wireless/brcm80211/brcmsmac/otp.h b/drivers/net/wireless/brcm80211/brcmsmac/otp.h deleted file mode 100644 index 6b6d31c..0000000 --- a/drivers/net/wireless/brcm80211/brcmsmac/otp.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _BRCM_OTP_H_ -#define _BRCM_OTP_H_ - -#include "types.h" - -/* OTP regions */ -#define OTP_HW_RGN 1 -#define OTP_SW_RGN 2 -#define OTP_CI_RGN 4 -#define OTP_FUSE_RGN 8 -/* From h/w region to end of OTP including checksum */ -#define OTP_ALL_RGN 0xf - -/* OTP Size */ -#define OTP_SZ_MAX (6144/8) /* maximum bytes in one CIS */ - -extern int otp_read_region(struct si_pub *sih, int region, u16 *data, - uint *wlen); - -#endif /* _BRCM_OTP_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c index 0fce56235..abfd788 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c @@ -4817,28 +4817,23 @@ static bool wlc_phy_txpwr_srom_read_lcnphy(struct brcms_phy *pi) s8 txpwr = 0; int i; struct brcms_phy_lcnphy *pi_lcn = pi->u.pi_lcnphy; - struct phy_shim_info *shim = pi->sh->physhim; + struct ssb_sprom *sprom = &pi->d11core->bus->sprom; if (CHSPEC_IS2G(pi->radio_chanspec)) { u16 cckpo = 0; u32 offset_ofdm, offset_mcs; - pi_lcn->lcnphy_tr_isolation_mid = - (u8)wlapi_getintvar(shim, BRCMS_SROM_TRISO2G); + pi_lcn->lcnphy_tr_isolation_mid = sprom->fem.ghz2.tr_iso; - pi_lcn->lcnphy_rx_power_offset = - (u8)wlapi_getintvar(shim, BRCMS_SROM_RXPO2G); + pi_lcn->lcnphy_rx_power_offset = sprom->rxpo2g; - pi->txpa_2g[0] = (s16)wlapi_getintvar(shim, BRCMS_SROM_PA0B0); - pi->txpa_2g[1] = (s16)wlapi_getintvar(shim, BRCMS_SROM_PA0B1); - pi->txpa_2g[2] = (s16)wlapi_getintvar(shim, BRCMS_SROM_PA0B2); + pi->txpa_2g[0] = sprom->pa0b0; + pi->txpa_2g[1] = sprom->pa0b1; + pi->txpa_2g[2] = sprom->pa0b2; - pi_lcn->lcnphy_rssi_vf = - (u8)wlapi_getintvar(shim, BRCMS_SROM_RSSISMF2G); - pi_lcn->lcnphy_rssi_vc = - (u8)wlapi_getintvar(shim, BRCMS_SROM_RSSISMC2G); - pi_lcn->lcnphy_rssi_gs = - (u8)wlapi_getintvar(shim, BRCMS_SROM_RSSISAV2G); + pi_lcn->lcnphy_rssi_vf = sprom->rssismf2g; + pi_lcn->lcnphy_rssi_vc = sprom->rssismc2g; + pi_lcn->lcnphy_rssi_gs = sprom->rssisav2g; pi_lcn->lcnphy_rssi_vf_lowtemp = pi_lcn->lcnphy_rssi_vf; pi_lcn->lcnphy_rssi_vc_lowtemp = pi_lcn->lcnphy_rssi_vc; @@ -4848,7 +4843,7 @@ static bool wlc_phy_txpwr_srom_read_lcnphy(struct brcms_phy *pi) pi_lcn->lcnphy_rssi_vc_hightemp = pi_lcn->lcnphy_rssi_vc; pi_lcn->lcnphy_rssi_gs_hightemp = pi_lcn->lcnphy_rssi_gs; - txpwr = (s8)wlapi_getintvar(shim, BRCMS_SROM_MAXP2GA0); + txpwr = sprom->core_pwr_info[0].maxpwr_2g; pi->tx_srom_max_2g = txpwr; for (i = 0; i < PWRTBL_NUM_COEFF; i++) { @@ -4856,8 +4851,8 @@ static bool wlc_phy_txpwr_srom_read_lcnphy(struct brcms_phy *pi) pi->txpa_2g_high_temp[i] = pi->txpa_2g[i]; } - cckpo = (u16)wlapi_getintvar(shim, BRCMS_SROM_CCK2GPO); - offset_ofdm = (u32)wlapi_getintvar(shim, BRCMS_SROM_OFDM2GPO); + cckpo = sprom->cck2gpo; + offset_ofdm = sprom->ofdm2gpo; if (cckpo) { uint max_pwr_chan = txpwr; @@ -4876,7 +4871,7 @@ static bool wlc_phy_txpwr_srom_read_lcnphy(struct brcms_phy *pi) } else { u8 opo = 0; - opo = (u8)wlapi_getintvar(shim, BRCMS_SROM_OPO); + opo = sprom->opo; for (i = TXP_FIRST_CCK; i <= TXP_LAST_CCK; i++) pi->tx_srom_max_rate_2g[i] = txpwr; @@ -4886,12 +4881,8 @@ static bool wlc_phy_txpwr_srom_read_lcnphy(struct brcms_phy *pi) ((offset_ofdm & 0xf) * 2); offset_ofdm >>= 4; } - offset_mcs = - wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO1) << 16; - offset_mcs |= - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO0); + offset_mcs = sprom->mcs2gpo[1] << 16; + offset_mcs |= sprom->mcs2gpo[0]; pi_lcn->lcnphy_mcs20_po = offset_mcs; for (i = TXP_FIRST_SISO_MCS_20; i <= TXP_LAST_SISO_MCS_20; i++) { @@ -4901,25 +4892,17 @@ static bool wlc_phy_txpwr_srom_read_lcnphy(struct brcms_phy *pi) } } - pi_lcn->lcnphy_rawtempsense = - (u16)wlapi_getintvar(shim, BRCMS_SROM_RAWTEMPSENSE); - pi_lcn->lcnphy_measPower = - (u8)wlapi_getintvar(shim, BRCMS_SROM_MEASPOWER); - pi_lcn->lcnphy_tempsense_slope = - (u8)wlapi_getintvar(shim, BRCMS_SROM_TEMPSENSE_SLOPE); - pi_lcn->lcnphy_hw_iqcal_en = - (bool)wlapi_getintvar(shim, BRCMS_SROM_HW_IQCAL_EN); - pi_lcn->lcnphy_iqcal_swp_dis = - (bool)wlapi_getintvar(shim, BRCMS_SROM_IQCAL_SWP_DIS); - pi_lcn->lcnphy_tempcorrx = - (u8)wlapi_getintvar(shim, BRCMS_SROM_TEMPCORRX); - pi_lcn->lcnphy_tempsense_option = - (u8)wlapi_getintvar(shim, BRCMS_SROM_TEMPSENSE_OPTION); - pi_lcn->lcnphy_freqoffset_corr = - (u8)wlapi_getintvar(shim, BRCMS_SROM_FREQOFFSET_CORR); - if ((u8)wlapi_getintvar(shim, BRCMS_SROM_AA2G) > 1) + pi_lcn->lcnphy_rawtempsense = sprom->rawtempsense; + pi_lcn->lcnphy_measPower = sprom->measpower; + pi_lcn->lcnphy_tempsense_slope = sprom->tempsense_slope; + pi_lcn->lcnphy_hw_iqcal_en = sprom->hw_iqcal_en; + pi_lcn->lcnphy_iqcal_swp_dis = sprom->iqcal_swp_dis; + pi_lcn->lcnphy_tempcorrx = sprom->tempcorrx; + pi_lcn->lcnphy_tempsense_option = sprom->tempsense_option; + pi_lcn->lcnphy_freqoffset_corr = sprom->freqoffset_corr; + if (sprom->ant_available_bg > 1) wlc_phy_ant_rxdiv_set((struct brcms_phy_pub *) pi, - (u8) wlapi_getintvar(shim, BRCMS_SROM_AA2G)); + sprom->ant_available_bg); } pi_lcn->lcnphy_cck_dig_filt_type = -1; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c index 812b6e3..13b2615 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c @@ -14386,30 +14386,30 @@ static void wlc_phy_txpwr_srom_read_ppr_nphy(struct brcms_phy *pi) { u16 bw40po, cddpo, stbcpo, bwduppo; uint band_num; - struct phy_shim_info *shim = pi->sh->physhim; + struct ssb_sprom *sprom = &pi->d11core->bus->sprom; if (pi->sh->sromrev >= 9) return; - bw40po = (u16) wlapi_getintvar(shim, BRCMS_SROM_BW40PO); + bw40po = sprom->bw40po; pi->bw402gpo = bw40po & 0xf; pi->bw405gpo = (bw40po & 0xf0) >> 4; pi->bw405glpo = (bw40po & 0xf00) >> 8; pi->bw405ghpo = (bw40po & 0xf000) >> 12; - cddpo = (u16) wlapi_getintvar(shim, BRCMS_SROM_CDDPO); + cddpo = sprom->cddpo; pi->cdd2gpo = cddpo & 0xf; pi->cdd5gpo = (cddpo & 0xf0) >> 4; pi->cdd5glpo = (cddpo & 0xf00) >> 8; pi->cdd5ghpo = (cddpo & 0xf000) >> 12; - stbcpo = (u16) wlapi_getintvar(shim, BRCMS_SROM_STBCPO); + stbcpo = sprom->stbcpo; pi->stbc2gpo = stbcpo & 0xf; pi->stbc5gpo = (stbcpo & 0xf0) >> 4; pi->stbc5glpo = (stbcpo & 0xf00) >> 8; pi->stbc5ghpo = (stbcpo & 0xf000) >> 12; - bwduppo = (u16) wlapi_getintvar(shim, BRCMS_SROM_BWDUPPO); + bwduppo = sprom->bwduppo; pi->bwdup2gpo = bwduppo & 0xf; pi->bwdup5gpo = (bwduppo & 0xf0) >> 4; pi->bwdup5glpo = (bwduppo & 0xf00) >> 8; @@ -14419,242 +14419,137 @@ static void wlc_phy_txpwr_srom_read_ppr_nphy(struct brcms_phy *pi) band_num++) { switch (band_num) { case 0: - pi->nphy_pwrctrl_info[PHY_CORE_0].max_pwr_2g = - (s8) wlapi_getintvar(shim, - BRCMS_SROM_MAXP2GA0); + sprom->core_pwr_info[0].maxpwr_2g; pi->nphy_pwrctrl_info[PHY_CORE_1].max_pwr_2g = - (s8) wlapi_getintvar(shim, - BRCMS_SROM_MAXP2GA1); + sprom->core_pwr_info[1].maxpwr_2g; pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_2g_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA2GW0A0); + sprom->core_pwr_info[0].pa_2g[0]; pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_2g_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA2GW0A1); + sprom->core_pwr_info[1].pa_2g[0]; pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_2g_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA2GW1A0); + sprom->core_pwr_info[0].pa_2g[1]; pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_2g_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA2GW1A1); + sprom->core_pwr_info[1].pa_2g[1]; pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_2g_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA2GW2A0); + sprom->core_pwr_info[0].pa_2g[2]; pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_2g_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA2GW2A1); + sprom->core_pwr_info[1].pa_2g[2]; pi->nphy_pwrctrl_info[PHY_CORE_0].idle_targ_2g = - (s8) wlapi_getintvar(shim, BRCMS_SROM_ITT2GA0); + sprom->core_pwr_info[0].itssi_2g; pi->nphy_pwrctrl_info[PHY_CORE_1].idle_targ_2g = - (s8) wlapi_getintvar(shim, BRCMS_SROM_ITT2GA1); - - pi->cck2gpo = (u16) wlapi_getintvar(shim, - BRCMS_SROM_CCK2GPO); - - pi->ofdm2gpo = - (u32) wlapi_getintvar(shim, - BRCMS_SROM_OFDM2GPO); - - pi->mcs2gpo[0] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO0); - pi->mcs2gpo[1] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO1); - pi->mcs2gpo[2] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO2); - pi->mcs2gpo[3] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO3); - pi->mcs2gpo[4] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO4); - pi->mcs2gpo[5] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO5); - pi->mcs2gpo[6] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO6); - pi->mcs2gpo[7] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS2GPO7); + sprom->core_pwr_info[1].itssi_2g; + + pi->cck2gpo = sprom->cck2gpo; + + pi->ofdm2gpo = sprom->ofdm2gpo; + + pi->mcs2gpo[0] = sprom->mcs2gpo[0]; + pi->mcs2gpo[1] = sprom->mcs2gpo[1]; + pi->mcs2gpo[2] = sprom->mcs2gpo[2]; + pi->mcs2gpo[3] = sprom->mcs2gpo[3]; + pi->mcs2gpo[4] = sprom->mcs2gpo[4]; + pi->mcs2gpo[5] = sprom->mcs2gpo[5]; + pi->mcs2gpo[6] = sprom->mcs2gpo[6]; + pi->mcs2gpo[7] = sprom->mcs2gpo[7]; break; case 1: pi->nphy_pwrctrl_info[PHY_CORE_0].max_pwr_5gm = - (s8) wlapi_getintvar(shim, BRCMS_SROM_MAXP5GA0); + sprom->core_pwr_info[0].maxpwr_5g; pi->nphy_pwrctrl_info[PHY_CORE_1].max_pwr_5gm = - (s8) wlapi_getintvar(shim, - BRCMS_SROM_MAXP5GA1); + sprom->core_pwr_info[1].maxpwr_5g; pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_5gm_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GW0A0); + sprom->core_pwr_info[0].pa_5g[0]; pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_5gm_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GW0A1); + sprom->core_pwr_info[1].pa_5g[0]; pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_5gm_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GW1A0); + sprom->core_pwr_info[0].pa_5g[1]; pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_5gm_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GW1A1); + sprom->core_pwr_info[1].pa_5g[1]; pi->nphy_pwrctrl_info[PHY_CORE_0].pwrdet_5gm_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GW2A0); + sprom->core_pwr_info[0].pa_5g[2]; pi->nphy_pwrctrl_info[PHY_CORE_1].pwrdet_5gm_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GW2A1); + sprom->core_pwr_info[1].pa_5g[2]; pi->nphy_pwrctrl_info[PHY_CORE_0].idle_targ_5gm = - (s8) wlapi_getintvar(shim, BRCMS_SROM_ITT5GA0); + sprom->core_pwr_info[0].itssi_5g; pi->nphy_pwrctrl_info[PHY_CORE_1].idle_targ_5gm = - (s8) wlapi_getintvar(shim, BRCMS_SROM_ITT5GA1); - - pi->ofdm5gpo = - (u32) wlapi_getintvar(shim, - BRCMS_SROM_OFDM5GPO); - - pi->mcs5gpo[0] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO0); - pi->mcs5gpo[1] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO1); - pi->mcs5gpo[2] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO2); - pi->mcs5gpo[3] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO3); - pi->mcs5gpo[4] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO4); - pi->mcs5gpo[5] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO5); - pi->mcs5gpo[6] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO6); - pi->mcs5gpo[7] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GPO7); + sprom->core_pwr_info[1].itssi_5g; + + pi->ofdm5gpo = sprom->ofdm5gpo; + + pi->mcs5gpo[0] = sprom->mcs5gpo[0]; + pi->mcs5gpo[1] = sprom->mcs5gpo[1]; + pi->mcs5gpo[2] = sprom->mcs5gpo[2]; + pi->mcs5gpo[3] = sprom->mcs5gpo[3]; + pi->mcs5gpo[4] = sprom->mcs5gpo[4]; + pi->mcs5gpo[5] = sprom->mcs5gpo[5]; + pi->mcs5gpo[6] = sprom->mcs5gpo[6]; + pi->mcs5gpo[7] = sprom->mcs5gpo[7]; break; case 2: pi->nphy_pwrctrl_info[0].max_pwr_5gl = - (s8) wlapi_getintvar(shim, - BRCMS_SROM_MAXP5GLA0); + sprom->core_pwr_info[0].maxpwr_5gl; pi->nphy_pwrctrl_info[1].max_pwr_5gl = - (s8) wlapi_getintvar(shim, - BRCMS_SROM_MAXP5GLA1); + sprom->core_pwr_info[1].maxpwr_5gl; pi->nphy_pwrctrl_info[0].pwrdet_5gl_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GLW0A0); + sprom->core_pwr_info[0].pa_5gl[0]; pi->nphy_pwrctrl_info[1].pwrdet_5gl_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GLW0A1); + sprom->core_pwr_info[1].pa_5gl[0]; pi->nphy_pwrctrl_info[0].pwrdet_5gl_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GLW1A0); + sprom->core_pwr_info[0].pa_5gl[1]; pi->nphy_pwrctrl_info[1].pwrdet_5gl_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GLW1A1); + sprom->core_pwr_info[1].pa_5gl[1]; pi->nphy_pwrctrl_info[0].pwrdet_5gl_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GLW2A0); + sprom->core_pwr_info[0].pa_5gl[2]; pi->nphy_pwrctrl_info[1].pwrdet_5gl_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GLW2A1); + sprom->core_pwr_info[1].pa_5gl[2]; pi->nphy_pwrctrl_info[0].idle_targ_5gl = 0; pi->nphy_pwrctrl_info[1].idle_targ_5gl = 0; - pi->ofdm5glpo = - (u32) wlapi_getintvar(shim, - BRCMS_SROM_OFDM5GLPO); - - pi->mcs5glpo[0] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO0); - pi->mcs5glpo[1] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO1); - pi->mcs5glpo[2] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO2); - pi->mcs5glpo[3] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO3); - pi->mcs5glpo[4] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO4); - pi->mcs5glpo[5] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO5); - pi->mcs5glpo[6] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO6); - pi->mcs5glpo[7] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GLPO7); + pi->ofdm5glpo = sprom->ofdm5glpo; + + pi->mcs5glpo[0] = sprom->mcs5glpo[0]; + pi->mcs5glpo[1] = sprom->mcs5glpo[1]; + pi->mcs5glpo[2] = sprom->mcs5glpo[2]; + pi->mcs5glpo[3] = sprom->mcs5glpo[3]; + pi->mcs5glpo[4] = sprom->mcs5glpo[4]; + pi->mcs5glpo[5] = sprom->mcs5glpo[5]; + pi->mcs5glpo[6] = sprom->mcs5glpo[6]; + pi->mcs5glpo[7] = sprom->mcs5glpo[7]; break; case 3: pi->nphy_pwrctrl_info[0].max_pwr_5gh = - (s8) wlapi_getintvar(shim, - BRCMS_SROM_MAXP5GHA0); + sprom->core_pwr_info[0].maxpwr_5gh; pi->nphy_pwrctrl_info[1].max_pwr_5gh = - (s8) wlapi_getintvar(shim, - BRCMS_SROM_MAXP5GHA1); + sprom->core_pwr_info[1].maxpwr_5gh; pi->nphy_pwrctrl_info[0].pwrdet_5gh_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GHW0A0); + sprom->core_pwr_info[0].pa_5gh[0]; pi->nphy_pwrctrl_info[1].pwrdet_5gh_a1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GHW0A1); + sprom->core_pwr_info[1].pa_5gh[0]; pi->nphy_pwrctrl_info[0].pwrdet_5gh_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GHW1A0); + sprom->core_pwr_info[0].pa_5gh[1]; pi->nphy_pwrctrl_info[1].pwrdet_5gh_b0 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GHW1A1); + sprom->core_pwr_info[1].pa_5gh[1]; pi->nphy_pwrctrl_info[0].pwrdet_5gh_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GHW2A0); + sprom->core_pwr_info[0].pa_5gh[2]; pi->nphy_pwrctrl_info[1].pwrdet_5gh_b1 = - (s16) wlapi_getintvar(shim, - BRCMS_SROM_PA5GHW2A1); + sprom->core_pwr_info[1].pa_5gh[2]; pi->nphy_pwrctrl_info[0].idle_targ_5gh = 0; pi->nphy_pwrctrl_info[1].idle_targ_5gh = 0; - pi->ofdm5ghpo = - (u32) wlapi_getintvar(shim, - BRCMS_SROM_OFDM5GHPO); - - pi->mcs5ghpo[0] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO0); - pi->mcs5ghpo[1] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO1); - pi->mcs5ghpo[2] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO2); - pi->mcs5ghpo[3] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO3); - pi->mcs5ghpo[4] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO4); - pi->mcs5ghpo[5] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO5); - pi->mcs5ghpo[6] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO6); - pi->mcs5ghpo[7] = - (u16) wlapi_getintvar(shim, - BRCMS_SROM_MCS5GHPO7); + pi->ofdm5ghpo = sprom->ofdm5ghpo; + + pi->mcs5ghpo[0] = sprom->mcs5ghpo[0]; + pi->mcs5ghpo[1] = sprom->mcs5ghpo[1]; + pi->mcs5ghpo[2] = sprom->mcs5ghpo[2]; + pi->mcs5ghpo[3] = sprom->mcs5ghpo[3]; + pi->mcs5ghpo[4] = sprom->mcs5ghpo[4]; + pi->mcs5ghpo[5] = sprom->mcs5ghpo[5]; + pi->mcs5ghpo[6] = sprom->mcs5ghpo[6]; + pi->mcs5ghpo[7] = sprom->mcs5ghpo[7]; break; } } @@ -14664,45 +14559,34 @@ static void wlc_phy_txpwr_srom_read_ppr_nphy(struct brcms_phy *pi) static bool wlc_phy_txpwr_srom_read_nphy(struct brcms_phy *pi) { - struct phy_shim_info *shim = pi->sh->physhim; - - pi->antswitch = (u8) wlapi_getintvar(shim, BRCMS_SROM_ANTSWITCH); - pi->aa2g = (u8) wlapi_getintvar(shim, BRCMS_SROM_AA2G); - pi->aa5g = (u8) wlapi_getintvar(shim, BRCMS_SROM_AA5G); - - pi->srom_fem2g.tssipos = (u8) wlapi_getintvar(shim, - BRCMS_SROM_TSSIPOS2G); - pi->srom_fem2g.extpagain = (u8) wlapi_getintvar(shim, - BRCMS_SROM_EXTPAGAIN2G); - pi->srom_fem2g.pdetrange = (u8) wlapi_getintvar(shim, - BRCMS_SROM_PDETRANGE2G); - pi->srom_fem2g.triso = (u8) wlapi_getintvar(shim, BRCMS_SROM_TRISO2G); - pi->srom_fem2g.antswctrllut = - (u8) wlapi_getintvar(shim, BRCMS_SROM_ANTSWCTL2G); - - pi->srom_fem5g.tssipos = (u8) wlapi_getintvar(shim, - BRCMS_SROM_TSSIPOS5G); - pi->srom_fem5g.extpagain = (u8) wlapi_getintvar(shim, - BRCMS_SROM_EXTPAGAIN5G); - pi->srom_fem5g.pdetrange = (u8) wlapi_getintvar(shim, - BRCMS_SROM_PDETRANGE5G); - pi->srom_fem5g.triso = (u8) wlapi_getintvar(shim, BRCMS_SROM_TRISO5G); - if (wlapi_getvar(shim, BRCMS_SROM_ANTSWCTL5G)) - pi->srom_fem5g.antswctrllut = - (u8) wlapi_getintvar(shim, BRCMS_SROM_ANTSWCTL5G); + struct ssb_sprom *sprom = &pi->d11core->bus->sprom; + + pi->antswitch = sprom->antswitch; + pi->aa2g = sprom->ant_available_bg; + pi->aa5g = sprom->ant_available_a; + + pi->srom_fem2g.tssipos = sprom->fem.ghz2.tssipos; + pi->srom_fem2g.extpagain = sprom->fem.ghz2.extpa_gain; + pi->srom_fem2g.pdetrange = sprom->fem.ghz2.pdet_range; + pi->srom_fem2g.triso = sprom->fem.ghz2.tr_iso; + pi->srom_fem2g.antswctrllut = sprom->fem.ghz2.antswlut; + + pi->srom_fem5g.tssipos = sprom->fem.ghz5.tssipos; + pi->srom_fem5g.extpagain = sprom->fem.ghz5.extpa_gain; + pi->srom_fem5g.pdetrange = sprom->fem.ghz5.pdet_range; + pi->srom_fem5g.triso = sprom->fem.ghz5.tr_iso; + if (sprom->fem.ghz5.antswlut) + pi->srom_fem5g.antswctrllut = sprom->fem.ghz5.antswlut; else - pi->srom_fem5g.antswctrllut = - (u8) wlapi_getintvar(shim, BRCMS_SROM_ANTSWCTL2G); + pi->srom_fem5g.antswctrllut = sprom->fem.ghz2.antswlut; wlc_phy_txpower_ipa_upd(pi); - pi->phy_txcore_disable_temp = - (s16) wlapi_getintvar(shim, BRCMS_SROM_TEMPTHRESH); + pi->phy_txcore_disable_temp = sprom->tempthresh; if (pi->phy_txcore_disable_temp == 0) pi->phy_txcore_disable_temp = PHY_CHAIN_TX_DISABLE_TEMP; - pi->phy_tempsense_offset = (s8) wlapi_getintvar(shim, - BRCMS_SROM_TEMPOFFSET); + pi->phy_tempsense_offset = sprom->tempoffset; if (pi->phy_tempsense_offset != 0) { if (pi->phy_tempsense_offset > (NPHY_SROM_TEMPSHIFT + NPHY_SROM_MAXTEMPOFFSET)) @@ -14717,8 +14601,7 @@ static bool wlc_phy_txpwr_srom_read_nphy(struct brcms_phy *pi) pi->phy_txcore_enable_temp = pi->phy_txcore_disable_temp - PHY_HYSTERESIS_DELTATEMP; - pi->phycal_tempdelta = - (u8) wlapi_getintvar(shim, BRCMS_SROM_PHYCAL_TEMPDELTA); + pi->phycal_tempdelta = sprom->phycal_tempdelta; if (pi->phycal_tempdelta > NPHY_CAL_MAXTEMPDELTA) pi->phycal_tempdelta = 0; @@ -21460,7 +21343,7 @@ void wlc_phy_antsel_init(struct brcms_phy_pub *ppi, bool lut_init) write_phy_reg(pi, 0xc8, 0x0); write_phy_reg(pi, 0xc9, 0x0); - ai_gpiocontrol(pi->sh->sih, mask, mask, GPIO_DRV_PRIORITY); + bcma_chipco_gpio_control(&pi->d11core->bus->drv_cc, mask, mask); mc = bcma_read32(pi->d11core, D11REGOFFS(maccontrol)); mc &= ~MCTL_GPOUT_SEL_MASK; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.c b/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.c index 5926854..a0de5db 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.c @@ -214,12 +214,3 @@ wlapi_copyto_objmem(struct phy_shim_info *physhim, uint offset, const void *buf, { brcms_b_copyto_objmem(physhim->wlc_hw, offset, buf, l, sel); } - -char *wlapi_getvar(struct phy_shim_info *physhim, enum brcms_srom_id id) -{ - return getvar(physhim->wlc_hw->sih, id); -} -int wlapi_getintvar(struct phy_shim_info *physhim, enum brcms_srom_id id) -{ - return getintvar(physhim->wlc_hw->sih, id); -} diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.h b/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.h index 9168c45..2c5b66b 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/phy_shim.h @@ -175,8 +175,5 @@ extern void wlapi_copyto_objmem(struct phy_shim_info *physhim, uint, extern void wlapi_high_update_phy_mode(struct phy_shim_info *physhim, u32 phy_mode); extern u16 wlapi_bmac_get_txant(struct phy_shim_info *physhim); -extern char *wlapi_getvar(struct phy_shim_info *physhim, enum brcms_srom_id id); -extern int wlapi_getintvar(struct phy_shim_info *physhim, - enum brcms_srom_id id); #endif /* _BRCM_PHY_SHIM_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pub.h b/drivers/net/wireless/brcm80211/brcmsmac/pub.h index f0038ad..aa5d67f 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/pub.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/pub.h @@ -22,232 +22,6 @@ #include "types.h" #include "defs.h" -enum brcms_srom_id { - BRCMS_SROM_NULL, - BRCMS_SROM_CONT, - BRCMS_SROM_AA2G, - BRCMS_SROM_AA5G, - BRCMS_SROM_AG0, - BRCMS_SROM_AG1, - BRCMS_SROM_AG2, - BRCMS_SROM_AG3, - BRCMS_SROM_ANTSWCTL2G, - BRCMS_SROM_ANTSWCTL5G, - BRCMS_SROM_ANTSWITCH, - BRCMS_SROM_BOARDFLAGS2, - BRCMS_SROM_BOARDFLAGS, - BRCMS_SROM_BOARDNUM, - BRCMS_SROM_BOARDREV, - BRCMS_SROM_BOARDTYPE, - BRCMS_SROM_BW40PO, - BRCMS_SROM_BWDUPPO, - BRCMS_SROM_BXA2G, - BRCMS_SROM_BXA5G, - BRCMS_SROM_CC, - BRCMS_SROM_CCK2GPO, - BRCMS_SROM_CCKBW202GPO, - BRCMS_SROM_CCKBW20UL2GPO, - BRCMS_SROM_CCODE, - BRCMS_SROM_CDDPO, - BRCMS_SROM_DEVID, - BRCMS_SROM_ET1MACADDR, - BRCMS_SROM_EXTPAGAIN2G, - BRCMS_SROM_EXTPAGAIN5G, - BRCMS_SROM_FREQOFFSET_CORR, - BRCMS_SROM_HW_IQCAL_EN, - BRCMS_SROM_IL0MACADDR, - BRCMS_SROM_IQCAL_SWP_DIS, - BRCMS_SROM_LEDBH0, - BRCMS_SROM_LEDBH1, - BRCMS_SROM_LEDBH2, - BRCMS_SROM_LEDBH3, - BRCMS_SROM_LEDDC, - BRCMS_SROM_LEGOFDM40DUPPO, - BRCMS_SROM_LEGOFDMBW202GPO, - BRCMS_SROM_LEGOFDMBW205GHPO, - BRCMS_SROM_LEGOFDMBW205GLPO, - BRCMS_SROM_LEGOFDMBW205GMPO, - BRCMS_SROM_LEGOFDMBW20UL2GPO, - BRCMS_SROM_LEGOFDMBW20UL5GHPO, - BRCMS_SROM_LEGOFDMBW20UL5GLPO, - BRCMS_SROM_LEGOFDMBW20UL5GMPO, - BRCMS_SROM_MACADDR, - BRCMS_SROM_MCS2GPO0, - BRCMS_SROM_MCS2GPO1, - BRCMS_SROM_MCS2GPO2, - BRCMS_SROM_MCS2GPO3, - BRCMS_SROM_MCS2GPO4, - BRCMS_SROM_MCS2GPO5, - BRCMS_SROM_MCS2GPO6, - BRCMS_SROM_MCS2GPO7, - BRCMS_SROM_MCS32PO, - BRCMS_SROM_MCS5GHPO0, - BRCMS_SROM_MCS5GHPO1, - BRCMS_SROM_MCS5GHPO2, - BRCMS_SROM_MCS5GHPO3, - BRCMS_SROM_MCS5GHPO4, - BRCMS_SROM_MCS5GHPO5, - BRCMS_SROM_MCS5GHPO6, - BRCMS_SROM_MCS5GHPO7, - BRCMS_SROM_MCS5GLPO0, - BRCMS_SROM_MCS5GLPO1, - BRCMS_SROM_MCS5GLPO2, - BRCMS_SROM_MCS5GLPO3, - BRCMS_SROM_MCS5GLPO4, - BRCMS_SROM_MCS5GLPO5, - BRCMS_SROM_MCS5GLPO6, - BRCMS_SROM_MCS5GLPO7, - BRCMS_SROM_MCS5GPO0, - BRCMS_SROM_MCS5GPO1, - BRCMS_SROM_MCS5GPO2, - BRCMS_SROM_MCS5GPO3, - BRCMS_SROM_MCS5GPO4, - BRCMS_SROM_MCS5GPO5, - BRCMS_SROM_MCS5GPO6, - BRCMS_SROM_MCS5GPO7, - BRCMS_SROM_MCSBW202GPO, - BRCMS_SROM_MCSBW205GHPO, - BRCMS_SROM_MCSBW205GLPO, - BRCMS_SROM_MCSBW205GMPO, - BRCMS_SROM_MCSBW20UL2GPO, - BRCMS_SROM_MCSBW20UL5GHPO, - BRCMS_SROM_MCSBW20UL5GLPO, - BRCMS_SROM_MCSBW20UL5GMPO, - BRCMS_SROM_MCSBW402GPO, - BRCMS_SROM_MCSBW405GHPO, - BRCMS_SROM_MCSBW405GLPO, - BRCMS_SROM_MCSBW405GMPO, - BRCMS_SROM_MEASPOWER, - BRCMS_SROM_OFDM2GPO, - BRCMS_SROM_OFDM5GHPO, - BRCMS_SROM_OFDM5GLPO, - BRCMS_SROM_OFDM5GPO, - BRCMS_SROM_OPO, - BRCMS_SROM_PA0B0, - BRCMS_SROM_PA0B1, - BRCMS_SROM_PA0B2, - BRCMS_SROM_PA0ITSSIT, - BRCMS_SROM_PA0MAXPWR, - BRCMS_SROM_PA1B0, - BRCMS_SROM_PA1B1, - BRCMS_SROM_PA1B2, - BRCMS_SROM_PA1HIB0, - BRCMS_SROM_PA1HIB1, - BRCMS_SROM_PA1HIB2, - BRCMS_SROM_PA1HIMAXPWR, - BRCMS_SROM_PA1ITSSIT, - BRCMS_SROM_PA1LOB0, - BRCMS_SROM_PA1LOB1, - BRCMS_SROM_PA1LOB2, - BRCMS_SROM_PA1LOMAXPWR, - BRCMS_SROM_PA1MAXPWR, - BRCMS_SROM_PDETRANGE2G, - BRCMS_SROM_PDETRANGE5G, - BRCMS_SROM_PHYCAL_TEMPDELTA, - BRCMS_SROM_RAWTEMPSENSE, - BRCMS_SROM_REGREV, - BRCMS_SROM_REV, - BRCMS_SROM_RSSISAV2G, - BRCMS_SROM_RSSISAV5G, - BRCMS_SROM_RSSISMC2G, - BRCMS_SROM_RSSISMC5G, - BRCMS_SROM_RSSISMF2G, - BRCMS_SROM_RSSISMF5G, - BRCMS_SROM_RXCHAIN, - BRCMS_SROM_RXPO2G, - BRCMS_SROM_RXPO5G, - BRCMS_SROM_STBCPO, - BRCMS_SROM_TEMPCORRX, - BRCMS_SROM_TEMPOFFSET, - BRCMS_SROM_TEMPSENSE_OPTION, - BRCMS_SROM_TEMPSENSE_SLOPE, - BRCMS_SROM_TEMPTHRESH, - BRCMS_SROM_TRI2G, - BRCMS_SROM_TRI5GH, - BRCMS_SROM_TRI5GL, - BRCMS_SROM_TRI5G, - BRCMS_SROM_TRISO2G, - BRCMS_SROM_TRISO5G, - BRCMS_SROM_TSSIPOS2G, - BRCMS_SROM_TSSIPOS5G, - BRCMS_SROM_TXCHAIN, - /* - * per-path identifiers (see srom.c) - */ - BRCMS_SROM_ITT2GA0, - BRCMS_SROM_ITT2GA1, - BRCMS_SROM_ITT2GA2, - BRCMS_SROM_ITT2GA3, - BRCMS_SROM_ITT5GA0, - BRCMS_SROM_ITT5GA1, - BRCMS_SROM_ITT5GA2, - BRCMS_SROM_ITT5GA3, - BRCMS_SROM_MAXP2GA0, - BRCMS_SROM_MAXP2GA1, - BRCMS_SROM_MAXP2GA2, - BRCMS_SROM_MAXP2GA3, - BRCMS_SROM_MAXP5GA0, - BRCMS_SROM_MAXP5GA1, - BRCMS_SROM_MAXP5GA2, - BRCMS_SROM_MAXP5GA3, - BRCMS_SROM_MAXP5GHA0, - BRCMS_SROM_MAXP5GHA1, - BRCMS_SROM_MAXP5GHA2, - BRCMS_SROM_MAXP5GHA3, - BRCMS_SROM_MAXP5GLA0, - BRCMS_SROM_MAXP5GLA1, - BRCMS_SROM_MAXP5GLA2, - BRCMS_SROM_MAXP5GLA3, - BRCMS_SROM_PA2GW0A0, - BRCMS_SROM_PA2GW0A1, - BRCMS_SROM_PA2GW0A2, - BRCMS_SROM_PA2GW0A3, - BRCMS_SROM_PA2GW1A0, - BRCMS_SROM_PA2GW1A1, - BRCMS_SROM_PA2GW1A2, - BRCMS_SROM_PA2GW1A3, - BRCMS_SROM_PA2GW2A0, - BRCMS_SROM_PA2GW2A1, - BRCMS_SROM_PA2GW2A2, - BRCMS_SROM_PA2GW2A3, - BRCMS_SROM_PA5GHW0A0, - BRCMS_SROM_PA5GHW0A1, - BRCMS_SROM_PA5GHW0A2, - BRCMS_SROM_PA5GHW0A3, - BRCMS_SROM_PA5GHW1A0, - BRCMS_SROM_PA5GHW1A1, - BRCMS_SROM_PA5GHW1A2, - BRCMS_SROM_PA5GHW1A3, - BRCMS_SROM_PA5GHW2A0, - BRCMS_SROM_PA5GHW2A1, - BRCMS_SROM_PA5GHW2A2, - BRCMS_SROM_PA5GHW2A3, - BRCMS_SROM_PA5GLW0A0, - BRCMS_SROM_PA5GLW0A1, - BRCMS_SROM_PA5GLW0A2, - BRCMS_SROM_PA5GLW0A3, - BRCMS_SROM_PA5GLW1A0, - BRCMS_SROM_PA5GLW1A1, - BRCMS_SROM_PA5GLW1A2, - BRCMS_SROM_PA5GLW1A3, - BRCMS_SROM_PA5GLW2A0, - BRCMS_SROM_PA5GLW2A1, - BRCMS_SROM_PA5GLW2A2, - BRCMS_SROM_PA5GLW2A3, - BRCMS_SROM_PA5GW0A0, - BRCMS_SROM_PA5GW0A1, - BRCMS_SROM_PA5GW0A2, - BRCMS_SROM_PA5GW0A3, - BRCMS_SROM_PA5GW1A0, - BRCMS_SROM_PA5GW1A1, - BRCMS_SROM_PA5GW1A2, - BRCMS_SROM_PA5GW1A3, - BRCMS_SROM_PA5GW2A0, - BRCMS_SROM_PA5GW2A1, - BRCMS_SROM_PA5GW2A2, - BRCMS_SROM_PA5GW2A3, -}; - #define BRCMS_NUMRATES 16 /* max # of rates in a rateset */ /* phy types */ @@ -565,8 +339,6 @@ extern void brcms_c_ampdu_flush(struct brcms_c_info *wlc, struct ieee80211_sta *sta, u16 tid); extern void brcms_c_ampdu_tx_operational(struct brcms_c_info *wlc, u8 tid, u8 ba_wsize, uint max_rx_ampdu_bytes); -extern char *getvar(struct si_pub *sih, enum brcms_srom_id id); -extern int getintvar(struct si_pub *sih, enum brcms_srom_id id); extern int brcms_c_module_register(struct brcms_pub *pub, const char *name, struct brcms_info *hdl, int (*down_fn)(void *handle)); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/srom.c b/drivers/net/wireless/brcm80211/brcmsmac/srom.c deleted file mode 100644 index b96f4b9..0000000 --- a/drivers/net/wireless/brcm80211/brcmsmac/srom.c +++ /dev/null @@ -1,980 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/io.h> -#include <linux/etherdevice.h> -#include <linux/crc8.h> -#include <stdarg.h> - -#include <chipcommon.h> -#include <brcmu_utils.h> -#include "pub.h" -#include "nicpci.h" -#include "aiutils.h" -#include "otp.h" -#include "srom.h" -#include "soc.h" - -/* - * SROM CRC8 polynomial value: - * - * x^8 + x^7 +x^6 + x^4 + x^2 + 1 - */ -#define SROM_CRC8_POLY 0xAB - -/* Maximum srom: 6 Kilobits == 768 bytes */ -#define SROM_MAX 768 - -/* PCI fields */ -#define PCI_F0DEVID 48 - -#define SROM_WORDS 64 - -#define SROM_SSID 2 - -#define SROM_WL1LHMAXP 29 - -#define SROM_WL1LPAB0 30 -#define SROM_WL1LPAB1 31 -#define SROM_WL1LPAB2 32 - -#define SROM_WL1HPAB0 33 -#define SROM_WL1HPAB1 34 -#define SROM_WL1HPAB2 35 - -#define SROM_MACHI_IL0 36 -#define SROM_MACMID_IL0 37 -#define SROM_MACLO_IL0 38 -#define SROM_MACHI_ET1 42 -#define SROM_MACMID_ET1 43 -#define SROM_MACLO_ET1 44 - -#define SROM_BXARSSI2G 40 -#define SROM_BXARSSI5G 41 - -#define SROM_TRI52G 42 -#define SROM_TRI5GHL 43 - -#define SROM_RXPO52G 45 - -#define SROM_AABREV 46 -/* Fields in AABREV */ -#define SROM_BR_MASK 0x00ff -#define SROM_CC_MASK 0x0f00 -#define SROM_CC_SHIFT 8 -#define SROM_AA0_MASK 0x3000 -#define SROM_AA0_SHIFT 12 -#define SROM_AA1_MASK 0xc000 -#define SROM_AA1_SHIFT 14 - -#define SROM_WL0PAB0 47 -#define SROM_WL0PAB1 48 -#define SROM_WL0PAB2 49 - -#define SROM_LEDBH10 50 -#define SROM_LEDBH32 51 - -#define SROM_WL10MAXP 52 - -#define SROM_WL1PAB0 53 -#define SROM_WL1PAB1 54 -#define SROM_WL1PAB2 55 - -#define SROM_ITT 56 - -#define SROM_BFL 57 -#define SROM_BFL2 28 - -#define SROM_AG10 58 - -#define SROM_CCODE 59 - -#define SROM_OPO 60 - -#define SROM_CRCREV 63 - -#define SROM4_WORDS 220 - -#define SROM4_TXCHAIN_MASK 0x000f -#define SROM4_RXCHAIN_MASK 0x00f0 -#define SROM4_SWITCH_MASK 0xff00 - -/* Per-path fields */ -#define MAX_PATH_SROM 4 - -#define SROM4_CRCREV 219 - -/* SROM Rev 8: Make space for a 48word hardware header for PCIe rev >= 6. - * This is acombined srom for both MIMO and SISO boards, usable in - * the .130 4Kilobit OTP with hardware redundancy. - */ -#define SROM8_BREV 65 - -#define SROM8_BFL0 66 -#define SROM8_BFL1 67 -#define SROM8_BFL2 68 -#define SROM8_BFL3 69 - -#define SROM8_MACHI 70 -#define SROM8_MACMID 71 -#define SROM8_MACLO 72 - -#define SROM8_CCODE 73 -#define SROM8_REGREV 74 - -#define SROM8_LEDBH10 75 -#define SROM8_LEDBH32 76 - -#define SROM8_LEDDC 77 - -#define SROM8_AA 78 - -#define SROM8_AG10 79 -#define SROM8_AG32 80 - -#define SROM8_TXRXC 81 - -#define SROM8_BXARSSI2G 82 -#define SROM8_BXARSSI5G 83 -#define SROM8_TRI52G 84 -#define SROM8_TRI5GHL 85 -#define SROM8_RXPO52G 86 - -#define SROM8_FEM2G 87 -#define SROM8_FEM5G 88 -#define SROM8_FEM_ANTSWLUT_MASK 0xf800 -#define SROM8_FEM_ANTSWLUT_SHIFT 11 -#define SROM8_FEM_TR_ISO_MASK 0x0700 -#define SROM8_FEM_TR_ISO_SHIFT 8 -#define SROM8_FEM_PDET_RANGE_MASK 0x00f8 -#define SROM8_FEM_PDET_RANGE_SHIFT 3 -#define SROM8_FEM_EXTPA_GAIN_MASK 0x0006 -#define SROM8_FEM_EXTPA_GAIN_SHIFT 1 -#define SROM8_FEM_TSSIPOS_MASK 0x0001 -#define SROM8_FEM_TSSIPOS_SHIFT 0 - -#define SROM8_THERMAL 89 - -/* Temp sense related entries */ -#define SROM8_MPWR_RAWTS 90 -#define SROM8_TS_SLP_OPT_CORRX 91 -/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, - * IQSWP: IQ CAL swap disable */ -#define SROM8_FOC_HWIQ_IQSWP 92 - -/* Temperature delta for PHY calibration */ -#define SROM8_PHYCAL_TEMPDELTA 93 - -/* Per-path offsets & fields */ -#define SROM8_PATH0 96 -#define SROM8_PATH1 112 -#define SROM8_PATH2 128 -#define SROM8_PATH3 144 - -#define SROM8_2G_ITT_MAXP 0 -#define SROM8_2G_PA 1 -#define SROM8_5G_ITT_MAXP 4 -#define SROM8_5GLH_MAXP 5 -#define SROM8_5G_PA 6 -#define SROM8_5GL_PA 9 -#define SROM8_5GH_PA 12 - -/* All the miriad power offsets */ -#define SROM8_2G_CCKPO 160 - -#define SROM8_2G_OFDMPO 161 -#define SROM8_5G_OFDMPO 163 -#define SROM8_5GL_OFDMPO 165 -#define SROM8_5GH_OFDMPO 167 - -#define SROM8_2G_MCSPO 169 -#define SROM8_5G_MCSPO 177 -#define SROM8_5GL_MCSPO 185 -#define SROM8_5GH_MCSPO 193 - -#define SROM8_CDDPO 201 -#define SROM8_STBCPO 202 -#define SROM8_BW40PO 203 -#define SROM8_BWDUPPO 204 - -/* SISO PA parameters are in the path0 spaces */ -#define SROM8_SISO 96 - -/* Legacy names for SISO PA paramters */ -#define SROM8_W0_ITTMAXP (SROM8_SISO + SROM8_2G_ITT_MAXP) -#define SROM8_W0_PAB0 (SROM8_SISO + SROM8_2G_PA) -#define SROM8_W0_PAB1 (SROM8_SISO + SROM8_2G_PA + 1) -#define SROM8_W0_PAB2 (SROM8_SISO + SROM8_2G_PA + 2) -#define SROM8_W1_ITTMAXP (SROM8_SISO + SROM8_5G_ITT_MAXP) -#define SROM8_W1_MAXP_LCHC (SROM8_SISO + SROM8_5GLH_MAXP) -#define SROM8_W1_PAB0 (SROM8_SISO + SROM8_5G_PA) -#define SROM8_W1_PAB1 (SROM8_SISO + SROM8_5G_PA + 1) -#define SROM8_W1_PAB2 (SROM8_SISO + SROM8_5G_PA + 2) -#define SROM8_W1_PAB0_LC (SROM8_SISO + SROM8_5GL_PA) -#define SROM8_W1_PAB1_LC (SROM8_SISO + SROM8_5GL_PA + 1) -#define SROM8_W1_PAB2_LC (SROM8_SISO + SROM8_5GL_PA + 2) -#define SROM8_W1_PAB0_HC (SROM8_SISO + SROM8_5GH_PA) -#define SROM8_W1_PAB1_HC (SROM8_SISO + SROM8_5GH_PA + 1) -#define SROM8_W1_PAB2_HC (SROM8_SISO + SROM8_5GH_PA + 2) - -/* SROM REV 9 */ -#define SROM9_2GPO_CCKBW20 160 -#define SROM9_2GPO_CCKBW20UL 161 -#define SROM9_2GPO_LOFDMBW20 162 -#define SROM9_2GPO_LOFDMBW20UL 164 - -#define SROM9_5GLPO_LOFDMBW20 166 -#define SROM9_5GLPO_LOFDMBW20UL 168 -#define SROM9_5GMPO_LOFDMBW20 170 -#define SROM9_5GMPO_LOFDMBW20UL 172 -#define SROM9_5GHPO_LOFDMBW20 174 -#define SROM9_5GHPO_LOFDMBW20UL 176 - -#define SROM9_2GPO_MCSBW20 178 -#define SROM9_2GPO_MCSBW20UL 180 -#define SROM9_2GPO_MCSBW40 182 - -#define SROM9_5GLPO_MCSBW20 184 -#define SROM9_5GLPO_MCSBW20UL 186 -#define SROM9_5GLPO_MCSBW40 188 -#define SROM9_5GMPO_MCSBW20 190 -#define SROM9_5GMPO_MCSBW20UL 192 -#define SROM9_5GMPO_MCSBW40 194 -#define SROM9_5GHPO_MCSBW20 196 -#define SROM9_5GHPO_MCSBW20UL 198 -#define SROM9_5GHPO_MCSBW40 200 - -#define SROM9_PO_MCS32 202 -#define SROM9_PO_LOFDM40DUP 203 - -/* SROM flags (see sromvar_t) */ - -/* value continues as described by the next entry */ -#define SRFL_MORE 1 -#define SRFL_NOFFS 2 /* value bits can't be all one's */ -#define SRFL_PRHEX 4 /* value is in hexdecimal format */ -#define SRFL_PRSIGN 8 /* value is in signed decimal format */ -#define SRFL_CCODE 0x10 /* value is in country code format */ -#define SRFL_ETHADDR 0x20 /* value is an Ethernet address */ -#define SRFL_LEDDC 0x40 /* value is an LED duty cycle */ -/* do not generate a nvram param, entry is for mfgc */ -#define SRFL_NOVAR 0x80 - -/* Max. nvram variable table size */ -#define MAXSZ_NVRAM_VARS 4096 - -/* - * indicates type of value. - */ -enum brcms_srom_var_type { - BRCMS_SROM_STRING, - BRCMS_SROM_SNUMBER, - BRCMS_SROM_UNUMBER -}; - -/* - * storage type for srom variable. - * - * var_list: for linked list operations. - * varid: identifier of the variable. - * var_type: type of variable. - * buf: variable value when var_type == BRCMS_SROM_STRING. - * uval: unsigned variable value when var_type == BRCMS_SROM_UNUMBER. - * sval: signed variable value when var_type == BRCMS_SROM_SNUMBER. - */ -struct brcms_srom_list_head { - struct list_head var_list; - enum brcms_srom_id varid; - enum brcms_srom_var_type var_type; - union { - char buf[0]; - u32 uval; - s32 sval; - }; -}; - -struct brcms_sromvar { - enum brcms_srom_id varid; - u32 revmask; - u32 flags; - u16 off; - u16 mask; -}; - -struct brcms_varbuf { - char *base; /* pointer to buffer base */ - char *buf; /* pointer to current position */ - unsigned int size; /* current (residual) size in bytes */ -}; - -/* - * Assumptions: - * - Ethernet address spans across 3 consecutive words - * - * Table rules: - * - Add multiple entries next to each other if a value spans across multiple - * words (even multiple fields in the same word) with each entry except the - * last having it's SRFL_MORE bit set. - * - Ethernet address entry does not follow above rule and must not have - * SRFL_MORE bit set. Its SRFL_ETHADDR bit implies it takes multiple words. - * - The last entry's name field must be NULL to indicate the end of the table. - * Other entries must have non-NULL name. - */ -static const struct brcms_sromvar pci_sromvars[] = { - {BRCMS_SROM_DEVID, 0xffffff00, SRFL_PRHEX | SRFL_NOVAR, PCI_F0DEVID, - 0xffff}, - {BRCMS_SROM_BOARDREV, 0xffffff00, SRFL_PRHEX, SROM8_BREV, 0xffff}, - {BRCMS_SROM_BOARDFLAGS, 0xffffff00, SRFL_PRHEX | SRFL_MORE, SROM8_BFL0, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM8_BFL1, 0xffff}, - {BRCMS_SROM_BOARDFLAGS2, 0xffffff00, SRFL_PRHEX | SRFL_MORE, SROM8_BFL2, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM8_BFL3, 0xffff}, - {BRCMS_SROM_BOARDTYPE, 0xfffffffc, SRFL_PRHEX, SROM_SSID, 0xffff}, - {BRCMS_SROM_BOARDNUM, 0xffffff00, 0, SROM8_MACLO, 0xffff}, - {BRCMS_SROM_REGREV, 0xffffff00, 0, SROM8_REGREV, 0x00ff}, - {BRCMS_SROM_LEDBH0, 0xffffff00, SRFL_NOFFS, SROM8_LEDBH10, 0x00ff}, - {BRCMS_SROM_LEDBH1, 0xffffff00, SRFL_NOFFS, SROM8_LEDBH10, 0xff00}, - {BRCMS_SROM_LEDBH2, 0xffffff00, SRFL_NOFFS, SROM8_LEDBH32, 0x00ff}, - {BRCMS_SROM_LEDBH3, 0xffffff00, SRFL_NOFFS, SROM8_LEDBH32, 0xff00}, - {BRCMS_SROM_PA0B0, 0xffffff00, SRFL_PRHEX, SROM8_W0_PAB0, 0xffff}, - {BRCMS_SROM_PA0B1, 0xffffff00, SRFL_PRHEX, SROM8_W0_PAB1, 0xffff}, - {BRCMS_SROM_PA0B2, 0xffffff00, SRFL_PRHEX, SROM8_W0_PAB2, 0xffff}, - {BRCMS_SROM_PA0ITSSIT, 0xffffff00, 0, SROM8_W0_ITTMAXP, 0xff00}, - {BRCMS_SROM_PA0MAXPWR, 0xffffff00, 0, SROM8_W0_ITTMAXP, 0x00ff}, - {BRCMS_SROM_OPO, 0xffffff00, 0, SROM8_2G_OFDMPO, 0x00ff}, - {BRCMS_SROM_AA2G, 0xffffff00, 0, SROM8_AA, 0x00ff}, - {BRCMS_SROM_AA5G, 0xffffff00, 0, SROM8_AA, 0xff00}, - {BRCMS_SROM_AG0, 0xffffff00, 0, SROM8_AG10, 0x00ff}, - {BRCMS_SROM_AG1, 0xffffff00, 0, SROM8_AG10, 0xff00}, - {BRCMS_SROM_AG2, 0xffffff00, 0, SROM8_AG32, 0x00ff}, - {BRCMS_SROM_AG3, 0xffffff00, 0, SROM8_AG32, 0xff00}, - {BRCMS_SROM_PA1B0, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB0, 0xffff}, - {BRCMS_SROM_PA1B1, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB1, 0xffff}, - {BRCMS_SROM_PA1B2, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB2, 0xffff}, - {BRCMS_SROM_PA1LOB0, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB0_LC, 0xffff}, - {BRCMS_SROM_PA1LOB1, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB1_LC, 0xffff}, - {BRCMS_SROM_PA1LOB2, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB2_LC, 0xffff}, - {BRCMS_SROM_PA1HIB0, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB0_HC, 0xffff}, - {BRCMS_SROM_PA1HIB1, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB1_HC, 0xffff}, - {BRCMS_SROM_PA1HIB2, 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB2_HC, 0xffff}, - {BRCMS_SROM_PA1ITSSIT, 0xffffff00, 0, SROM8_W1_ITTMAXP, 0xff00}, - {BRCMS_SROM_PA1MAXPWR, 0xffffff00, 0, SROM8_W1_ITTMAXP, 0x00ff}, - {BRCMS_SROM_PA1LOMAXPWR, 0xffffff00, 0, SROM8_W1_MAXP_LCHC, 0xff00}, - {BRCMS_SROM_PA1HIMAXPWR, 0xffffff00, 0, SROM8_W1_MAXP_LCHC, 0x00ff}, - {BRCMS_SROM_BXA2G, 0xffffff00, 0, SROM8_BXARSSI2G, 0x1800}, - {BRCMS_SROM_RSSISAV2G, 0xffffff00, 0, SROM8_BXARSSI2G, 0x0700}, - {BRCMS_SROM_RSSISMC2G, 0xffffff00, 0, SROM8_BXARSSI2G, 0x00f0}, - {BRCMS_SROM_RSSISMF2G, 0xffffff00, 0, SROM8_BXARSSI2G, 0x000f}, - {BRCMS_SROM_BXA5G, 0xffffff00, 0, SROM8_BXARSSI5G, 0x1800}, - {BRCMS_SROM_RSSISAV5G, 0xffffff00, 0, SROM8_BXARSSI5G, 0x0700}, - {BRCMS_SROM_RSSISMC5G, 0xffffff00, 0, SROM8_BXARSSI5G, 0x00f0}, - {BRCMS_SROM_RSSISMF5G, 0xffffff00, 0, SROM8_BXARSSI5G, 0x000f}, - {BRCMS_SROM_TRI2G, 0xffffff00, 0, SROM8_TRI52G, 0x00ff}, - {BRCMS_SROM_TRI5G, 0xffffff00, 0, SROM8_TRI52G, 0xff00}, - {BRCMS_SROM_TRI5GL, 0xffffff00, 0, SROM8_TRI5GHL, 0x00ff}, - {BRCMS_SROM_TRI5GH, 0xffffff00, 0, SROM8_TRI5GHL, 0xff00}, - {BRCMS_SROM_RXPO2G, 0xffffff00, SRFL_PRSIGN, SROM8_RXPO52G, 0x00ff}, - {BRCMS_SROM_RXPO5G, 0xffffff00, SRFL_PRSIGN, SROM8_RXPO52G, 0xff00}, - {BRCMS_SROM_TXCHAIN, 0xffffff00, SRFL_NOFFS, SROM8_TXRXC, - SROM4_TXCHAIN_MASK}, - {BRCMS_SROM_RXCHAIN, 0xffffff00, SRFL_NOFFS, SROM8_TXRXC, - SROM4_RXCHAIN_MASK}, - {BRCMS_SROM_ANTSWITCH, 0xffffff00, SRFL_NOFFS, SROM8_TXRXC, - SROM4_SWITCH_MASK}, - {BRCMS_SROM_TSSIPOS2G, 0xffffff00, 0, SROM8_FEM2G, - SROM8_FEM_TSSIPOS_MASK}, - {BRCMS_SROM_EXTPAGAIN2G, 0xffffff00, 0, SROM8_FEM2G, - SROM8_FEM_EXTPA_GAIN_MASK}, - {BRCMS_SROM_PDETRANGE2G, 0xffffff00, 0, SROM8_FEM2G, - SROM8_FEM_PDET_RANGE_MASK}, - {BRCMS_SROM_TRISO2G, 0xffffff00, 0, SROM8_FEM2G, SROM8_FEM_TR_ISO_MASK}, - {BRCMS_SROM_ANTSWCTL2G, 0xffffff00, 0, SROM8_FEM2G, - SROM8_FEM_ANTSWLUT_MASK}, - {BRCMS_SROM_TSSIPOS5G, 0xffffff00, 0, SROM8_FEM5G, - SROM8_FEM_TSSIPOS_MASK}, - {BRCMS_SROM_EXTPAGAIN5G, 0xffffff00, 0, SROM8_FEM5G, - SROM8_FEM_EXTPA_GAIN_MASK}, - {BRCMS_SROM_PDETRANGE5G, 0xffffff00, 0, SROM8_FEM5G, - SROM8_FEM_PDET_RANGE_MASK}, - {BRCMS_SROM_TRISO5G, 0xffffff00, 0, SROM8_FEM5G, SROM8_FEM_TR_ISO_MASK}, - {BRCMS_SROM_ANTSWCTL5G, 0xffffff00, 0, SROM8_FEM5G, - SROM8_FEM_ANTSWLUT_MASK}, - {BRCMS_SROM_TEMPTHRESH, 0xffffff00, 0, SROM8_THERMAL, 0xff00}, - {BRCMS_SROM_TEMPOFFSET, 0xffffff00, 0, SROM8_THERMAL, 0x00ff}, - - {BRCMS_SROM_CCODE, 0xffffff00, SRFL_CCODE, SROM8_CCODE, 0xffff}, - {BRCMS_SROM_MACADDR, 0xffffff00, SRFL_ETHADDR, SROM8_MACHI, 0xffff}, - {BRCMS_SROM_LEDDC, 0xffffff00, SRFL_NOFFS | SRFL_LEDDC, SROM8_LEDDC, - 0xffff}, - {BRCMS_SROM_RAWTEMPSENSE, 0xffffff00, SRFL_PRHEX, SROM8_MPWR_RAWTS, - 0x01ff}, - {BRCMS_SROM_MEASPOWER, 0xffffff00, SRFL_PRHEX, SROM8_MPWR_RAWTS, - 0xfe00}, - {BRCMS_SROM_TEMPSENSE_SLOPE, 0xffffff00, SRFL_PRHEX, - SROM8_TS_SLP_OPT_CORRX, 0x00ff}, - {BRCMS_SROM_TEMPCORRX, 0xffffff00, SRFL_PRHEX, SROM8_TS_SLP_OPT_CORRX, - 0xfc00}, - {BRCMS_SROM_TEMPSENSE_OPTION, 0xffffff00, SRFL_PRHEX, - SROM8_TS_SLP_OPT_CORRX, 0x0300}, - {BRCMS_SROM_FREQOFFSET_CORR, 0xffffff00, SRFL_PRHEX, - SROM8_FOC_HWIQ_IQSWP, 0x000f}, - {BRCMS_SROM_IQCAL_SWP_DIS, 0xffffff00, SRFL_PRHEX, SROM8_FOC_HWIQ_IQSWP, - 0x0010}, - {BRCMS_SROM_HW_IQCAL_EN, 0xffffff00, SRFL_PRHEX, SROM8_FOC_HWIQ_IQSWP, - 0x0020}, - {BRCMS_SROM_PHYCAL_TEMPDELTA, 0xffffff00, 0, SROM8_PHYCAL_TEMPDELTA, - 0x00ff}, - - {BRCMS_SROM_CCK2GPO, 0x00000100, 0, SROM8_2G_CCKPO, 0xffff}, - {BRCMS_SROM_OFDM2GPO, 0x00000100, SRFL_MORE, SROM8_2G_OFDMPO, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM8_2G_OFDMPO + 1, 0xffff}, - {BRCMS_SROM_OFDM5GPO, 0x00000100, SRFL_MORE, SROM8_5G_OFDMPO, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM8_5G_OFDMPO + 1, 0xffff}, - {BRCMS_SROM_OFDM5GLPO, 0x00000100, SRFL_MORE, SROM8_5GL_OFDMPO, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM8_5GL_OFDMPO + 1, 0xffff}, - {BRCMS_SROM_OFDM5GHPO, 0x00000100, SRFL_MORE, SROM8_5GH_OFDMPO, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM8_5GH_OFDMPO + 1, 0xffff}, - {BRCMS_SROM_MCS2GPO0, 0x00000100, 0, SROM8_2G_MCSPO, 0xffff}, - {BRCMS_SROM_MCS2GPO1, 0x00000100, 0, SROM8_2G_MCSPO + 1, 0xffff}, - {BRCMS_SROM_MCS2GPO2, 0x00000100, 0, SROM8_2G_MCSPO + 2, 0xffff}, - {BRCMS_SROM_MCS2GPO3, 0x00000100, 0, SROM8_2G_MCSPO + 3, 0xffff}, - {BRCMS_SROM_MCS2GPO4, 0x00000100, 0, SROM8_2G_MCSPO + 4, 0xffff}, - {BRCMS_SROM_MCS2GPO5, 0x00000100, 0, SROM8_2G_MCSPO + 5, 0xffff}, - {BRCMS_SROM_MCS2GPO6, 0x00000100, 0, SROM8_2G_MCSPO + 6, 0xffff}, - {BRCMS_SROM_MCS2GPO7, 0x00000100, 0, SROM8_2G_MCSPO + 7, 0xffff}, - {BRCMS_SROM_MCS5GPO0, 0x00000100, 0, SROM8_5G_MCSPO, 0xffff}, - {BRCMS_SROM_MCS5GPO1, 0x00000100, 0, SROM8_5G_MCSPO + 1, 0xffff}, - {BRCMS_SROM_MCS5GPO2, 0x00000100, 0, SROM8_5G_MCSPO + 2, 0xffff}, - {BRCMS_SROM_MCS5GPO3, 0x00000100, 0, SROM8_5G_MCSPO + 3, 0xffff}, - {BRCMS_SROM_MCS5GPO4, 0x00000100, 0, SROM8_5G_MCSPO + 4, 0xffff}, - {BRCMS_SROM_MCS5GPO5, 0x00000100, 0, SROM8_5G_MCSPO + 5, 0xffff}, - {BRCMS_SROM_MCS5GPO6, 0x00000100, 0, SROM8_5G_MCSPO + 6, 0xffff}, - {BRCMS_SROM_MCS5GPO7, 0x00000100, 0, SROM8_5G_MCSPO + 7, 0xffff}, - {BRCMS_SROM_MCS5GLPO0, 0x00000100, 0, SROM8_5GL_MCSPO, 0xffff}, - {BRCMS_SROM_MCS5GLPO1, 0x00000100, 0, SROM8_5GL_MCSPO + 1, 0xffff}, - {BRCMS_SROM_MCS5GLPO2, 0x00000100, 0, SROM8_5GL_MCSPO + 2, 0xffff}, - {BRCMS_SROM_MCS5GLPO3, 0x00000100, 0, SROM8_5GL_MCSPO + 3, 0xffff}, - {BRCMS_SROM_MCS5GLPO4, 0x00000100, 0, SROM8_5GL_MCSPO + 4, 0xffff}, - {BRCMS_SROM_MCS5GLPO5, 0x00000100, 0, SROM8_5GL_MCSPO + 5, 0xffff}, - {BRCMS_SROM_MCS5GLPO6, 0x00000100, 0, SROM8_5GL_MCSPO + 6, 0xffff}, - {BRCMS_SROM_MCS5GLPO7, 0x00000100, 0, SROM8_5GL_MCSPO + 7, 0xffff}, - {BRCMS_SROM_MCS5GHPO0, 0x00000100, 0, SROM8_5GH_MCSPO, 0xffff}, - {BRCMS_SROM_MCS5GHPO1, 0x00000100, 0, SROM8_5GH_MCSPO + 1, 0xffff}, - {BRCMS_SROM_MCS5GHPO2, 0x00000100, 0, SROM8_5GH_MCSPO + 2, 0xffff}, - {BRCMS_SROM_MCS5GHPO3, 0x00000100, 0, SROM8_5GH_MCSPO + 3, 0xffff}, - {BRCMS_SROM_MCS5GHPO4, 0x00000100, 0, SROM8_5GH_MCSPO + 4, 0xffff}, - {BRCMS_SROM_MCS5GHPO5, 0x00000100, 0, SROM8_5GH_MCSPO + 5, 0xffff}, - {BRCMS_SROM_MCS5GHPO6, 0x00000100, 0, SROM8_5GH_MCSPO + 6, 0xffff}, - {BRCMS_SROM_MCS5GHPO7, 0x00000100, 0, SROM8_5GH_MCSPO + 7, 0xffff}, - {BRCMS_SROM_CDDPO, 0x00000100, 0, SROM8_CDDPO, 0xffff}, - {BRCMS_SROM_STBCPO, 0x00000100, 0, SROM8_STBCPO, 0xffff}, - {BRCMS_SROM_BW40PO, 0x00000100, 0, SROM8_BW40PO, 0xffff}, - {BRCMS_SROM_BWDUPPO, 0x00000100, 0, SROM8_BWDUPPO, 0xffff}, - - /* power per rate from sromrev 9 */ - {BRCMS_SROM_CCKBW202GPO, 0xfffffe00, 0, SROM9_2GPO_CCKBW20, 0xffff}, - {BRCMS_SROM_CCKBW20UL2GPO, 0xfffffe00, 0, SROM9_2GPO_CCKBW20UL, 0xffff}, - {BRCMS_SROM_LEGOFDMBW202GPO, 0xfffffe00, SRFL_MORE, - SROM9_2GPO_LOFDMBW20, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_LOFDMBW20 + 1, 0xffff}, - {BRCMS_SROM_LEGOFDMBW20UL2GPO, 0xfffffe00, SRFL_MORE, - SROM9_2GPO_LOFDMBW20UL, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_LOFDMBW20UL + 1, 0xffff}, - {BRCMS_SROM_LEGOFDMBW205GLPO, 0xfffffe00, SRFL_MORE, - SROM9_5GLPO_LOFDMBW20, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_LOFDMBW20 + 1, 0xffff}, - {BRCMS_SROM_LEGOFDMBW20UL5GLPO, 0xfffffe00, SRFL_MORE, - SROM9_5GLPO_LOFDMBW20UL, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_LOFDMBW20UL + 1, 0xffff}, - {BRCMS_SROM_LEGOFDMBW205GMPO, 0xfffffe00, SRFL_MORE, - SROM9_5GMPO_LOFDMBW20, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_LOFDMBW20 + 1, 0xffff}, - {BRCMS_SROM_LEGOFDMBW20UL5GMPO, 0xfffffe00, SRFL_MORE, - SROM9_5GMPO_LOFDMBW20UL, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_LOFDMBW20UL + 1, 0xffff}, - {BRCMS_SROM_LEGOFDMBW205GHPO, 0xfffffe00, SRFL_MORE, - SROM9_5GHPO_LOFDMBW20, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_LOFDMBW20 + 1, 0xffff}, - {BRCMS_SROM_LEGOFDMBW20UL5GHPO, 0xfffffe00, SRFL_MORE, - SROM9_5GHPO_LOFDMBW20UL, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_LOFDMBW20UL + 1, 0xffff}, - {BRCMS_SROM_MCSBW202GPO, 0xfffffe00, SRFL_MORE, SROM9_2GPO_MCSBW20, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_MCSBW20 + 1, 0xffff}, - {BRCMS_SROM_MCSBW20UL2GPO, 0xfffffe00, SRFL_MORE, SROM9_2GPO_MCSBW20UL, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_MCSBW20UL + 1, 0xffff}, - {BRCMS_SROM_MCSBW402GPO, 0xfffffe00, SRFL_MORE, SROM9_2GPO_MCSBW40, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_2GPO_MCSBW40 + 1, 0xffff}, - {BRCMS_SROM_MCSBW205GLPO, 0xfffffe00, SRFL_MORE, SROM9_5GLPO_MCSBW20, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_MCSBW20 + 1, 0xffff}, - {BRCMS_SROM_MCSBW20UL5GLPO, 0xfffffe00, SRFL_MORE, - SROM9_5GLPO_MCSBW20UL, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_MCSBW20UL + 1, 0xffff}, - {BRCMS_SROM_MCSBW405GLPO, 0xfffffe00, SRFL_MORE, SROM9_5GLPO_MCSBW40, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GLPO_MCSBW40 + 1, 0xffff}, - {BRCMS_SROM_MCSBW205GMPO, 0xfffffe00, SRFL_MORE, SROM9_5GMPO_MCSBW20, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_MCSBW20 + 1, 0xffff}, - {BRCMS_SROM_MCSBW20UL5GMPO, 0xfffffe00, SRFL_MORE, - SROM9_5GMPO_MCSBW20UL, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_MCSBW20UL + 1, 0xffff}, - {BRCMS_SROM_MCSBW405GMPO, 0xfffffe00, SRFL_MORE, SROM9_5GMPO_MCSBW40, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GMPO_MCSBW40 + 1, 0xffff}, - {BRCMS_SROM_MCSBW205GHPO, 0xfffffe00, SRFL_MORE, SROM9_5GHPO_MCSBW20, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_MCSBW20 + 1, 0xffff}, - {BRCMS_SROM_MCSBW20UL5GHPO, 0xfffffe00, SRFL_MORE, - SROM9_5GHPO_MCSBW20UL, 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_MCSBW20UL + 1, 0xffff}, - {BRCMS_SROM_MCSBW405GHPO, 0xfffffe00, SRFL_MORE, SROM9_5GHPO_MCSBW40, - 0xffff}, - {BRCMS_SROM_CONT, 0, 0, SROM9_5GHPO_MCSBW40 + 1, 0xffff}, - {BRCMS_SROM_MCS32PO, 0xfffffe00, 0, SROM9_PO_MCS32, 0xffff}, - {BRCMS_SROM_LEGOFDM40DUPPO, 0xfffffe00, 0, SROM9_PO_LOFDM40DUP, 0xffff}, - - {BRCMS_SROM_NULL, 0, 0, 0, 0} -}; - -static const struct brcms_sromvar perpath_pci_sromvars[] = { - {BRCMS_SROM_MAXP2GA0, 0xffffff00, 0, SROM8_2G_ITT_MAXP, 0x00ff}, - {BRCMS_SROM_ITT2GA0, 0xffffff00, 0, SROM8_2G_ITT_MAXP, 0xff00}, - {BRCMS_SROM_ITT5GA0, 0xffffff00, 0, SROM8_5G_ITT_MAXP, 0xff00}, - {BRCMS_SROM_PA2GW0A0, 0xffffff00, SRFL_PRHEX, SROM8_2G_PA, 0xffff}, - {BRCMS_SROM_PA2GW1A0, 0xffffff00, SRFL_PRHEX, SROM8_2G_PA + 1, 0xffff}, - {BRCMS_SROM_PA2GW2A0, 0xffffff00, SRFL_PRHEX, SROM8_2G_PA + 2, 0xffff}, - {BRCMS_SROM_MAXP5GA0, 0xffffff00, 0, SROM8_5G_ITT_MAXP, 0x00ff}, - {BRCMS_SROM_MAXP5GHA0, 0xffffff00, 0, SROM8_5GLH_MAXP, 0x00ff}, - {BRCMS_SROM_MAXP5GLA0, 0xffffff00, 0, SROM8_5GLH_MAXP, 0xff00}, - {BRCMS_SROM_PA5GW0A0, 0xffffff00, SRFL_PRHEX, SROM8_5G_PA, 0xffff}, - {BRCMS_SROM_PA5GW1A0, 0xffffff00, SRFL_PRHEX, SROM8_5G_PA + 1, 0xffff}, - {BRCMS_SROM_PA5GW2A0, 0xffffff00, SRFL_PRHEX, SROM8_5G_PA + 2, 0xffff}, - {BRCMS_SROM_PA5GLW0A0, 0xffffff00, SRFL_PRHEX, SROM8_5GL_PA, 0xffff}, - {BRCMS_SROM_PA5GLW1A0, 0xffffff00, SRFL_PRHEX, SROM8_5GL_PA + 1, - 0xffff}, - {BRCMS_SROM_PA5GLW2A0, 0xffffff00, SRFL_PRHEX, SROM8_5GL_PA + 2, - 0xffff}, - {BRCMS_SROM_PA5GHW0A0, 0xffffff00, SRFL_PRHEX, SROM8_5GH_PA, 0xffff}, - {BRCMS_SROM_PA5GHW1A0, 0xffffff00, SRFL_PRHEX, SROM8_5GH_PA + 1, - 0xffff}, - {BRCMS_SROM_PA5GHW2A0, 0xffffff00, SRFL_PRHEX, SROM8_5GH_PA + 2, - 0xffff}, - {BRCMS_SROM_NULL, 0, 0, 0, 0} -}; - -/* crc table has the same contents for every device instance, so it can be - * shared between devices. */ -static u8 brcms_srom_crc8_table[CRC8_TABLE_SIZE]; - -static uint mask_shift(u16 mask) -{ - uint i; - for (i = 0; i < (sizeof(mask) << 3); i++) { - if (mask & (1 << i)) - return i; - } - return 0; -} - -static uint mask_width(u16 mask) -{ - int i; - for (i = (sizeof(mask) << 3) - 1; i >= 0; i--) { - if (mask & (1 << i)) - return (uint) (i - mask_shift(mask) + 1); - } - return 0; -} - -static inline void le16_to_cpu_buf(u16 *buf, uint nwords) -{ - while (nwords--) - *(buf + nwords) = le16_to_cpu(*(__le16 *)(buf + nwords)); -} - -static inline void cpu_to_le16_buf(u16 *buf, uint nwords) -{ - while (nwords--) - *(__le16 *)(buf + nwords) = cpu_to_le16(*(buf + nwords)); -} - -/* - * convert binary srom data into linked list of srom variable items. - */ -static int -_initvars_srom_pci(u8 sromrev, u16 *srom, struct list_head *var_list) -{ - struct brcms_srom_list_head *entry; - enum brcms_srom_id id; - u16 w; - u32 val = 0; - const struct brcms_sromvar *srv; - uint width; - uint flags; - u32 sr = (1 << sromrev); - uint p; - uint pb = SROM8_PATH0; - const uint psz = SROM8_PATH1 - SROM8_PATH0; - - /* first store the srom revision */ - entry = kzalloc(sizeof(struct brcms_srom_list_head), GFP_KERNEL); - if (!entry) - return -ENOMEM; - - entry->varid = BRCMS_SROM_REV; - entry->var_type = BRCMS_SROM_UNUMBER; - entry->uval = sromrev; - list_add(&entry->var_list, var_list); - - for (srv = pci_sromvars; srv->varid != BRCMS_SROM_NULL; srv++) { - enum brcms_srom_var_type type; - u8 ea[ETH_ALEN]; - u8 extra_space = 0; - - if ((srv->revmask & sr) == 0) - continue; - - flags = srv->flags; - id = srv->varid; - - /* This entry is for mfgc only. Don't generate param for it, */ - if (flags & SRFL_NOVAR) - continue; - - if (flags & SRFL_ETHADDR) { - /* - * stored in string format XX:XX:XX:XX:XX:XX (17 chars) - */ - ea[0] = (srom[srv->off] >> 8) & 0xff; - ea[1] = srom[srv->off] & 0xff; - ea[2] = (srom[srv->off + 1] >> 8) & 0xff; - ea[3] = srom[srv->off + 1] & 0xff; - ea[4] = (srom[srv->off + 2] >> 8) & 0xff; - ea[5] = srom[srv->off + 2] & 0xff; - /* 17 characters + string terminator - union size */ - extra_space = 18 - sizeof(s32); - type = BRCMS_SROM_STRING; - } else { - w = srom[srv->off]; - val = (w & srv->mask) >> mask_shift(srv->mask); - width = mask_width(srv->mask); - - while (srv->flags & SRFL_MORE) { - srv++; - if (srv->off == 0) - continue; - - w = srom[srv->off]; - val += - ((w & srv->mask) >> mask_shift(srv-> - mask)) << - width; - width += mask_width(srv->mask); - } - - if ((flags & SRFL_NOFFS) - && ((int)val == (1 << width) - 1)) - continue; - - if (flags & SRFL_CCODE) { - type = BRCMS_SROM_STRING; - } else if (flags & SRFL_LEDDC) { - /* LED Powersave duty cycle has to be scaled: - *(oncount >> 24) (offcount >> 8) - */ - u32 w32 = /* oncount */ - (((val >> 8) & 0xff) << 24) | - /* offcount */ - (((val & 0xff)) << 8); - type = BRCMS_SROM_UNUMBER; - val = w32; - } else if ((flags & SRFL_PRSIGN) - && (val & (1 << (width - 1)))) { - type = BRCMS_SROM_SNUMBER; - val |= ~0 << width; - } else - type = BRCMS_SROM_UNUMBER; - } - - entry = kzalloc(sizeof(struct brcms_srom_list_head) + - extra_space, GFP_KERNEL); - if (!entry) - return -ENOMEM; - entry->varid = id; - entry->var_type = type; - if (flags & SRFL_ETHADDR) { - snprintf(entry->buf, 18, "%pM", ea); - } else if (flags & SRFL_CCODE) { - if (val == 0) - entry->buf[0] = '\0'; - else - snprintf(entry->buf, 3, "%c%c", - (val >> 8), (val & 0xff)); - } else { - entry->uval = val; - } - - list_add(&entry->var_list, var_list); - } - - for (p = 0; p < MAX_PATH_SROM; p++) { - for (srv = perpath_pci_sromvars; - srv->varid != BRCMS_SROM_NULL; srv++) { - if ((srv->revmask & sr) == 0) - continue; - - if (srv->flags & SRFL_NOVAR) - continue; - - w = srom[pb + srv->off]; - val = (w & srv->mask) >> mask_shift(srv->mask); - width = mask_width(srv->mask); - - /* Cheating: no per-path var is more than - * 1 word */ - if ((srv->flags & SRFL_NOFFS) - && ((int)val == (1 << width) - 1)) - continue; - - entry = - kzalloc(sizeof(struct brcms_srom_list_head), - GFP_KERNEL); - if (!entry) - return -ENOMEM; - entry->varid = srv->varid+p; - entry->var_type = BRCMS_SROM_UNUMBER; - entry->uval = val; - list_add(&entry->var_list, var_list); - } - pb += psz; - } - return 0; -} - -/* - * The crc check is done on a little-endian array, we need - * to switch the bytes around before checking crc (and - * then switch it back). - */ -static int do_crc_check(u16 *buf, unsigned nwords) -{ - u8 crc; - - cpu_to_le16_buf(buf, nwords); - crc = crc8(brcms_srom_crc8_table, (void *)buf, nwords << 1, CRC8_INIT_VALUE); - le16_to_cpu_buf(buf, nwords); - - return crc == CRC8_GOOD_VALUE(brcms_srom_crc8_table); -} - -/* - * Read in and validate sprom. - * Return 0 on success, nonzero on error. - */ -static int -sprom_read_pci(struct si_pub *sih, u16 *buf, uint nwords, bool check_crc) -{ - int err = 0; - uint i; - struct bcma_device *core; - uint sprom_offset; - - /* determine core to read */ - if (ai_get_ccrev(sih) < 32) { - core = ai_findcore(sih, BCMA_CORE_80211, 0); - sprom_offset = PCI_BAR0_SPROM_OFFSET; - } else { - core = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0); - sprom_offset = CHIPCREGOFFS(sromotp); - } - - /* read the sprom */ - for (i = 0; i < nwords; i++) - buf[i] = bcma_read16(core, sprom_offset+i*2); - - if (buf[0] == 0xffff) - /* - * The hardware thinks that an srom that starts with - * 0xffff is blank, regardless of the rest of the - * content, so declare it bad. - */ - return -ENODATA; - - if (check_crc && !do_crc_check(buf, nwords)) - err = -EIO; - - return err; -} - -static int otp_read_pci(struct si_pub *sih, u16 *buf, uint nwords) -{ - u8 *otp; - uint sz = OTP_SZ_MAX / 2; /* size in words */ - int err = 0; - - otp = kzalloc(OTP_SZ_MAX, GFP_ATOMIC); - if (otp == NULL) - return -ENOMEM; - - err = otp_read_region(sih, OTP_HW_RGN, (u16 *) otp, &sz); - - sz = min_t(uint, sz, nwords); - memcpy(buf, otp, sz * 2); - - kfree(otp); - - /* Check CRC */ - if (buf[0] == 0xffff) - /* The hardware thinks that an srom that starts with 0xffff - * is blank, regardless of the rest of the content, so declare - * it bad. - */ - return -ENODATA; - - /* fixup the endianness so crc8 will pass */ - cpu_to_le16_buf(buf, sz); - if (crc8(brcms_srom_crc8_table, (u8 *) buf, sz * 2, - CRC8_INIT_VALUE) != CRC8_GOOD_VALUE(brcms_srom_crc8_table)) - err = -EIO; - else - /* now correct the endianness of the byte array */ - le16_to_cpu_buf(buf, sz); - - return err; -} - -/* - * Initialize nonvolatile variable table from sprom. - * Return 0 on success, nonzero on error. - */ -int srom_var_init(struct si_pub *sih) -{ - u16 *srom; - u8 sromrev = 0; - u32 sr; - int err = 0; - - /* - * Apply CRC over SROM content regardless SROM is present or not. - */ - srom = kmalloc(SROM_MAX, GFP_ATOMIC); - if (!srom) - return -ENOMEM; - - crc8_populate_lsb(brcms_srom_crc8_table, SROM_CRC8_POLY); - if (ai_is_sprom_available(sih)) { - err = sprom_read_pci(sih, srom, SROM4_WORDS, true); - - if (err == 0) - /* srom read and passed crc */ - /* top word of sprom contains version and crc8 */ - sromrev = srom[SROM4_CRCREV] & 0xff; - } else { - /* Use OTP if SPROM not available */ - err = otp_read_pci(sih, srom, SROM4_WORDS); - if (err == 0) - /* OTP only contain SROM rev8/rev9 for now */ - sromrev = srom[SROM4_CRCREV] & 0xff; - } - - if (!err) { - struct si_info *sii = (struct si_info *)sih; - - /* Bitmask for the sromrev */ - sr = 1 << sromrev; - - /* - * srom version check: Current valid versions: 8, 9 - */ - if ((sr & 0x300) == 0) { - err = -EINVAL; - goto errout; - } - - INIT_LIST_HEAD(&sii->var_list); - - /* parse SROM into name=value pairs. */ - err = _initvars_srom_pci(sromrev, srom, &sii->var_list); - if (err) - srom_free_vars(sih); - } - -errout: - kfree(srom); - return err; -} - -void srom_free_vars(struct si_pub *sih) -{ - struct si_info *sii; - struct brcms_srom_list_head *entry, *next; - - sii = (struct si_info *)sih; - list_for_each_entry_safe(entry, next, &sii->var_list, var_list) { - list_del(&entry->var_list); - kfree(entry); - } -} - -/* - * Search the name=value vars for a specific one and return its value. - * Returns NULL if not found. - */ -char *getvar(struct si_pub *sih, enum brcms_srom_id id) -{ - struct si_info *sii; - struct brcms_srom_list_head *entry; - - sii = (struct si_info *)sih; - - list_for_each_entry(entry, &sii->var_list, var_list) - if (entry->varid == id) - return &entry->buf[0]; - - /* nothing found */ - return NULL; -} - -/* - * Search the vars for a specific one and return its value as - * an integer. Returns 0 if not found.- - */ -int getintvar(struct si_pub *sih, enum brcms_srom_id id) -{ - struct si_info *sii; - struct brcms_srom_list_head *entry; - unsigned long res; - - sii = (struct si_info *)sih; - - list_for_each_entry(entry, &sii->var_list, var_list) - if (entry->varid == id) { - if (entry->var_type == BRCMS_SROM_SNUMBER || - entry->var_type == BRCMS_SROM_UNUMBER) - return (int)entry->sval; - else if (!kstrtoul(&entry->buf[0], 0, &res)) - return (int)res; - } - - return 0; -} diff --git a/drivers/net/wireless/brcm80211/brcmsmac/srom.h b/drivers/net/wireless/brcm80211/brcmsmac/srom.h deleted file mode 100644 index f2a58f2..0000000 --- a/drivers/net/wireless/brcm80211/brcmsmac/srom.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _BRCM_SROM_H_ -#define _BRCM_SROM_H_ - -#include "types.h" - -/* Prototypes */ -extern int srom_var_init(struct si_pub *sih); -extern void srom_free_vars(struct si_pub *sih); - -extern int srom_read(struct si_pub *sih, uint bus, void *curmap, - uint byteoff, uint nbytes, u16 *buf, bool check_crc); - -#endif /* _BRCM_SROM_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmsmac/stf.c b/drivers/net/wireless/brcm80211/brcmsmac/stf.c index d8f528e..ed1d1aa 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/stf.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/stf.c @@ -370,9 +370,11 @@ void brcms_c_stf_phy_txant_upd(struct brcms_c_info *wlc) void brcms_c_stf_phy_chain_calc(struct brcms_c_info *wlc) { + struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom; + /* get available rx/tx chains */ - wlc->stf->hw_txchain = (u8) getintvar(wlc->hw->sih, BRCMS_SROM_TXCHAIN); - wlc->stf->hw_rxchain = (u8) getintvar(wlc->hw->sih, BRCMS_SROM_RXCHAIN); + wlc->stf->hw_txchain = sprom->txchain; + wlc->stf->hw_rxchain = sprom->rxchain; /* these parameter are intended to be used for all PHY types */ if (wlc->stf->hw_txchain == 0 || wlc->stf->hw_txchain == 0xf) { |