diff options
author | Kalle Valo <kvalo@codeaurora.org> | 2015-11-17 18:57:38 (GMT) |
---|---|---|
committer | Kalle Valo <kvalo@codeaurora.org> | 2015-11-18 12:28:30 (GMT) |
commit | e705c12146aa9c69ca498d4ebb83ba7138f9b41f (patch) | |
tree | b55d4eb7a83c2ec117f460684eb71c89eee6a709 /drivers/net/wireless/iwlwifi/iwl-prph.h | |
parent | 7ac9a364c1721a863ecc6cc9aba66e10114908db (diff) | |
download | linux-e705c12146aa9c69ca498d4ebb83ba7138f9b41f.tar.xz |
iwlwifi: move under intel vendor directory
Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-prph.h')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-prph.h | 401 |
1 files changed, 0 insertions, 401 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h deleted file mode 100644 index 3ab777f..0000000 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ /dev/null @@ -1,401 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called COPYING. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - -#ifndef __iwl_prph_h__ -#define __iwl_prph_h__ - -/* - * Registers in this file are internal, not PCI bus memory mapped. - * Driver accesses these via HBUS_TARG_PRPH_* registers. - */ -#define PRPH_BASE (0x00000) -#define PRPH_END (0xFFFFF) - -/* APMG (power management) constants */ -#define APMG_BASE (PRPH_BASE + 0x3000) -#define APMG_CLK_CTRL_REG (APMG_BASE + 0x0000) -#define APMG_CLK_EN_REG (APMG_BASE + 0x0004) -#define APMG_CLK_DIS_REG (APMG_BASE + 0x0008) -#define APMG_PS_CTRL_REG (APMG_BASE + 0x000c) -#define APMG_PCIDEV_STT_REG (APMG_BASE + 0x0010) -#define APMG_RFKILL_REG (APMG_BASE + 0x0014) -#define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c) -#define APMG_RTC_INT_MSK_REG (APMG_BASE + 0x0020) -#define APMG_DIGITAL_SVR_REG (APMG_BASE + 0x0058) -#define APMG_ANALOG_SVR_REG (APMG_BASE + 0x006C) - -#define APMS_CLK_VAL_MRB_FUNC_MODE (0x00000001) -#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200) -#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800) - -#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000) -#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000) -#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000) -#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000) -#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000) -#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */ -#define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060) - -#define APMG_PCIDEV_STT_VAL_PERSIST_DIS (0x00000200) -#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) -#define APMG_PCIDEV_STT_VAL_WAKE_ME (0x00004000) - -#define APMG_RTC_INT_STT_RFKILL (0x10000000) - -/* Device system time */ -#define DEVICE_SYSTEM_TIME_REG 0xA0206C - -/* Device NMI register */ -#define DEVICE_SET_NMI_REG 0x00a01c30 -#define DEVICE_SET_NMI_VAL_HW BIT(0) -#define DEVICE_SET_NMI_VAL_DRV BIT(7) -#define DEVICE_SET_NMI_8000_REG 0x00a01c24 -#define DEVICE_SET_NMI_8000_VAL 0x1000000 - -/* Shared registers (0x0..0x3ff, via target indirect or periphery */ -#define SHR_BASE 0x00a10000 - -/* Shared GP1 register */ -#define SHR_APMG_GP1_REG 0x01dc -#define SHR_APMG_GP1_REG_PRPH (SHR_BASE + SHR_APMG_GP1_REG) -#define SHR_APMG_GP1_WF_XTAL_LP_EN 0x00000004 -#define SHR_APMG_GP1_CHICKEN_BIT_SELECT 0x80000000 - -/* Shared DL_CFG register */ -#define SHR_APMG_DL_CFG_REG 0x01c4 -#define SHR_APMG_DL_CFG_REG_PRPH (SHR_BASE + SHR_APMG_DL_CFG_REG) -#define SHR_APMG_DL_CFG_RTCS_CLK_SELECTOR_MSK 0x000000c0 -#define SHR_APMG_DL_CFG_RTCS_CLK_INTERNAL_XTAL 0x00000080 -#define SHR_APMG_DL_CFG_DL_CLOCK_POWER_UP 0x00000100 - -/* Shared APMG_XTAL_CFG register */ -#define SHR_APMG_XTAL_CFG_REG 0x1c0 -#define SHR_APMG_XTAL_CFG_XTAL_ON_REQ 0x80000000 - -/* - * Device reset for family 8000 - * write to bit 24 in order to reset the CPU -*/ -#define RELEASE_CPU_RESET (0x300C) -#define RELEASE_CPU_RESET_BIT BIT(24) - -/***************************************************************************** - * 7000/3000 series SHR DTS addresses * - *****************************************************************************/ - -#define SHR_MISC_WFM_DTS_EN (0x00a10024) -#define DTSC_CFG_MODE (0x00a10604) -#define DTSC_VREF_AVG (0x00a10648) -#define DTSC_VREF5_AVG (0x00a1064c) -#define DTSC_CFG_MODE_PERIODIC (0x2) -#define DTSC_PTAT_AVG (0x00a10650) - - -/** - * Tx Scheduler - * - * The Tx Scheduler selects the next frame to be transmitted, choosing TFDs - * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in - * host DRAM. It steers each frame's Tx command (which contains the frame - * data) into one of up to 7 prioritized Tx DMA FIFO channels within the - * device. A queue maps to only one (selectable by driver) Tx DMA channel, - * but one DMA channel may take input from several queues. - * - * Tx DMA FIFOs have dedicated purposes. - * - * For 5000 series and up, they are used differently - * (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c): - * - * 0 -- EDCA BK (background) frames, lowest priority - * 1 -- EDCA BE (best effort) frames, normal priority - * 2 -- EDCA VI (video) frames, higher priority - * 3 -- EDCA VO (voice) and management frames, highest priority - * 4 -- unused - * 5 -- unused - * 6 -- unused - * 7 -- Commands - * - * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6. - * In addition, driver can map the remaining queues to Tx DMA/FIFO - * channels 0-3 to support 11n aggregation via EDCA DMA channels. - * - * The driver sets up each queue to work in one of two modes: - * - * 1) Scheduler-Ack, in which the scheduler automatically supports a - * block-ack (BA) window of up to 64 TFDs. In this mode, each queue - * contains TFDs for a unique combination of Recipient Address (RA) - * and Traffic Identifier (TID), that is, traffic of a given - * Quality-Of-Service (QOS) priority, destined for a single station. - * - * In scheduler-ack mode, the scheduler keeps track of the Tx status of - * each frame within the BA window, including whether it's been transmitted, - * and whether it's been acknowledged by the receiving station. The device - * automatically processes block-acks received from the receiving STA, - * and reschedules un-acked frames to be retransmitted (successful - * Tx completion may end up being out-of-order). - * - * The driver must maintain the queue's Byte Count table in host DRAM - * for this mode. - * This mode does not support fragmentation. - * - * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order. - * The device may automatically retry Tx, but will retry only one frame - * at a time, until receiving ACK from receiving station, or reaching - * retry limit and giving up. - * - * The command queue (#4/#9) must use this mode! - * This mode does not require use of the Byte Count table in host DRAM. - * - * Driver controls scheduler operation via 3 means: - * 1) Scheduler registers - * 2) Shared scheduler data base in internal SRAM - * 3) Shared data in host DRAM - * - * Initialization: - * - * When loading, driver should allocate memory for: - * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs. - * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory - * (1024 bytes for each queue). - * - * After receiving "Alive" response from uCode, driver must initialize - * the scheduler (especially for queue #4/#9, the command queue, otherwise - * the driver can't issue commands!): - */ -#define SCD_MEM_LOWER_BOUND (0x0000) - -/** - * Max Tx window size is the max number of contiguous TFDs that the scheduler - * can keep track of at one time when creating block-ack chains of frames. - * Note that "64" matches the number of ack bits in a block-ack packet. - */ -#define SCD_WIN_SIZE 64 -#define SCD_FRAME_LIMIT 64 - -#define SCD_TXFIFO_POS_TID (0) -#define SCD_TXFIFO_POS_RA (4) -#define SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF) - -/* agn SCD */ -#define SCD_QUEUE_STTS_REG_POS_TXF (0) -#define SCD_QUEUE_STTS_REG_POS_ACTIVE (3) -#define SCD_QUEUE_STTS_REG_POS_WSL (4) -#define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19) -#define SCD_QUEUE_STTS_REG_MSK (0x017F0000) - -#define SCD_QUEUE_CTX_REG1_CREDIT_POS (8) -#define SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00) -#define SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS (24) -#define SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK (0xFF000000) -#define SCD_QUEUE_CTX_REG2_WIN_SIZE_POS (0) -#define SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK (0x0000007F) -#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) -#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) -#define SCD_GP_CTRL_ENABLE_31_QUEUES BIT(0) -#define SCD_GP_CTRL_AUTO_ACTIVE_MODE BIT(18) - -/* Context Data */ -#define SCD_CONTEXT_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x600) -#define SCD_CONTEXT_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x6A0) - -/* Tx status */ -#define SCD_TX_STTS_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x6A0) -#define SCD_TX_STTS_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x7E0) - -/* Translation Data */ -#define SCD_TRANS_TBL_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x7E0) -#define SCD_TRANS_TBL_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x808) - -#define SCD_CONTEXT_QUEUE_OFFSET(x)\ - (SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8)) - -#define SCD_TX_STTS_QUEUE_OFFSET(x)\ - (SCD_TX_STTS_MEM_LOWER_BOUND + ((x) * 16)) - -#define SCD_TRANS_TBL_OFFSET_QUEUE(x) \ - ((SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc) - -#define SCD_BASE (PRPH_BASE + 0xa02c00) - -#define SCD_SRAM_BASE_ADDR (SCD_BASE + 0x0) -#define SCD_DRAM_BASE_ADDR (SCD_BASE + 0x8) -#define SCD_AIT (SCD_BASE + 0x0c) -#define SCD_TXFACT (SCD_BASE + 0x10) -#define SCD_ACTIVE (SCD_BASE + 0x14) -#define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8) -#define SCD_CHAINEXT_EN (SCD_BASE + 0x244) -#define SCD_AGGR_SEL (SCD_BASE + 0x248) -#define SCD_INTERRUPT_MASK (SCD_BASE + 0x108) -#define SCD_GP_CTRL (SCD_BASE + 0x1a8) -#define SCD_EN_CTRL (SCD_BASE + 0x254) - -/*********************** END TX SCHEDULER *************************************/ - -/* tcp checksum offload */ -#define RX_EN_CSUM (0x00a00d88) - -/* Oscillator clock */ -#define OSC_CLK (0xa04068) -#define OSC_CLK_FORCE_CONTROL (0x8) - -#define FH_UCODE_LOAD_STATUS (0x1AF0) -#define CSR_UCODE_LOAD_STATUS_ADDR (0x1E70) -enum secure_load_status_reg { - LMPM_CPU_UCODE_LOADING_STARTED = 0x00000001, - LMPM_CPU_HDRS_LOADING_COMPLETED = 0x00000003, - LMPM_CPU_UCODE_LOADING_COMPLETED = 0x00000007, - LMPM_CPU_STATUS_NUM_OF_LAST_COMPLETED = 0x000000F8, - LMPM_CPU_STATUS_NUM_OF_LAST_LOADED_BLOCK = 0x0000FF00, -}; - -#define LMPM_SECURE_INSPECTOR_CODE_ADDR (0x1E38) -#define LMPM_SECURE_INSPECTOR_DATA_ADDR (0x1E3C) -#define LMPM_SECURE_UCODE_LOAD_CPU1_HDR_ADDR (0x1E78) -#define LMPM_SECURE_UCODE_LOAD_CPU2_HDR_ADDR (0x1E7C) - -#define LMPM_SECURE_INSPECTOR_CODE_MEM_SPACE (0x400000) -#define LMPM_SECURE_INSPECTOR_DATA_MEM_SPACE (0x402000) -#define LMPM_SECURE_CPU1_HDR_MEM_SPACE (0x420000) -#define LMPM_SECURE_CPU2_HDR_MEM_SPACE (0x420400) - -/* Rx FIFO */ -#define RXF_SIZE_ADDR (0xa00c88) -#define RXF_RD_D_SPACE (0xa00c40) -#define RXF_RD_WR_PTR (0xa00c50) -#define RXF_RD_RD_PTR (0xa00c54) -#define RXF_RD_FENCE_PTR (0xa00c4c) -#define RXF_SET_FENCE_MODE (0xa00c14) -#define RXF_LD_WR2FENCE (0xa00c1c) -#define RXF_FIFO_RD_FENCE_INC (0xa00c68) -#define RXF_SIZE_BYTE_CND_POS (7) -#define RXF_SIZE_BYTE_CNT_MSK (0x3ff << RXF_SIZE_BYTE_CND_POS) -#define RXF_DIFF_FROM_PREV (0x200) - -#define RXF_LD_FENCE_OFFSET_ADDR (0xa00c10) -#define RXF_FIFO_RD_FENCE_ADDR (0xa00c0c) - -/* Tx FIFO */ -#define TXF_FIFO_ITEM_CNT (0xa00438) -#define TXF_WR_PTR (0xa00414) -#define TXF_RD_PTR (0xa00410) -#define TXF_FENCE_PTR (0xa00418) -#define TXF_LOCK_FENCE (0xa00424) -#define TXF_LARC_NUM (0xa0043c) -#define TXF_READ_MODIFY_DATA (0xa00448) -#define TXF_READ_MODIFY_ADDR (0xa0044c) - -/* FW monitor */ -#define MON_BUFF_SAMPLE_CTL (0xa03c00) -#define MON_BUFF_BASE_ADDR (0xa03c3c) -#define MON_BUFF_END_ADDR (0xa03c40) -#define MON_BUFF_WRPTR (0xa03c44) -#define MON_BUFF_CYCLE_CNT (0xa03c48) - -#define MON_DMARB_RD_CTL_ADDR (0xa03c60) -#define MON_DMARB_RD_DATA_ADDR (0xa03c5c) - -#define DBGC_IN_SAMPLE (0xa03c00) - -/* enable the ID buf for read */ -#define WFPM_PS_CTL_CLR 0xA0300C -#define WFMP_MAC_ADDR_0 0xA03080 -#define WFMP_MAC_ADDR_1 0xA03084 -#define LMPM_PMG_EN 0xA01CEC -#define RADIO_REG_SYS_MANUAL_DFT_0 0xAD4078 -#define RFIC_REG_RD 0xAD0470 -#define WFPM_CTRL_REG 0xA03030 -enum { - ENABLE_WFPM = BIT(31), - WFPM_AUX_CTL_AUX_IF_MAC_OWNER_MSK = 0x80000000, -}; - -#define AUX_MISC_REG 0xA200B0 -enum { - HW_STEP_LOCATION_BITS = 24, -}; - -#define AUX_MISC_MASTER1_EN 0xA20818 -enum aux_misc_master1_en { - AUX_MISC_MASTER1_EN_SBE_MSK = 0x1, -}; - -#define AUX_MISC_MASTER1_SMPHR_STATUS 0xA20800 -#define RSA_ENABLE 0xA24B08 -#define PREG_AUX_BUS_WPROT_0 0xA04CC0 -#define SB_CPU_1_STATUS 0xA01E30 -#define SB_CPU_2_STATUS 0xA01E34 - -/* FW chicken bits */ -#define LMPM_CHICK 0xA01FF8 -enum { - LMPM_CHICK_EXTENDED_ADDR_SPACE = BIT(0), -}; - -/* FW chicken bits */ -#define LMPM_PAGE_PASS_NOTIF 0xA03824 -enum { - LMPM_PAGE_PASS_NOTIF_POS = BIT(20), -}; - -#endif /* __iwl_prph_h__ */ |