Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

1 files changed, 106 insertions, 19 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 87a230a..c829c50 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -122,6 +122,40 @@
 #define INDEX_TO_SEQ(i)	((i) & 0xff)
 #define SEQ_RX_FRAME	cpu_to_le16(0x8000)
 
+/*
+ * those functions retrieve specific information from
+ * the id field in the iwl_host_cmd struct which contains
+ * the command id, the group id and the version of the command
+ * and vice versa
+*/
+static inline u8 iwl_cmd_opcode(u32 cmdid)
+{
+	return cmdid & 0xFF;
+}
+
+static inline u8 iwl_cmd_groupid(u32 cmdid)
+{
+	return ((cmdid & 0xFF00) >> 8);
+}
+
+static inline u8 iwl_cmd_version(u32 cmdid)
+{
+	return ((cmdid & 0xFF0000) >> 16);
+}
+
+static inline u32 iwl_cmd_id(u8 opcode, u8 groupid, u8 version)
+{
+	return opcode + (groupid << 8) + (version << 16);
+}
+
+/* make u16 wide id out of u8 group and opcode */
+#define WIDE_ID(grp, opcode) ((grp << 8) | opcode)
+
+/* due to the conversion, this group is special; new groups
+ * should be defined in the appropriate fw-api header files
+ */
+#define IWL_ALWAYS_LONG_GROUP	1
+
 /**
  * struct iwl_cmd_header
  *
@@ -130,7 +164,7 @@
  */
 struct iwl_cmd_header {
 	u8 cmd;		/* Command ID:  REPLY_RXON, etc. */
-	u8 flags;	/* 0:5 reserved, 6 abort, 7 internal */
+	u8 group_id;
 	/*
 	 * The driver sets up the sequence number to values of its choosing.
 	 * uCode does not use this value, but passes it back to the driver
@@ -154,9 +188,22 @@ struct iwl_cmd_header {
 	__le16 sequence;
 } __packed;
 
-/* iwl_cmd_header flags value */
-#define IWL_CMD_FAILED_MSK 0x40
-
+/**
+ * struct iwl_cmd_header_wide
+ *
+ * This header format appears in the beginning of each command sent from the
+ * driver, and each response/notification received from uCode.
+ * this is the wide version that contains more information about the command
+ * like length, version and command type
+ */
+struct iwl_cmd_header_wide {
+	u8 cmd;
+	u8 group_id;
+	__le16 sequence;
+	__le16 length;
+	u8 reserved;
+	u8 version;
+} __packed;
 
 #define FH_RSCSR_FRAME_SIZE_MSK		0x00003FFF	/* bits 0-13 */
 #define FH_RSCSR_FRAME_INVALID		0x55550000
@@ -201,6 +248,8 @@ static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt)
  * @CMD_MAKE_TRANS_IDLE: The command response should mark the trans as idle.
  * @CMD_WAKE_UP_TRANS: The command response should wake up the trans
  *	(i.e. mark it as non-idle).
+ * @CMD_TB_BITMAP_POS: Position of the first bit for the TB bitmap. We need to
+ *	check that we leave enough room for the TBs bitmap which needs 20 bits.
  */
 enum CMD_MODE {
 	CMD_ASYNC		= BIT(0),
@@ -210,6 +259,8 @@ enum CMD_MODE {
 	CMD_SEND_IN_IDLE	= BIT(4),
 	CMD_MAKE_TRANS_IDLE	= BIT(5),
 	CMD_WAKE_UP_TRANS	= BIT(6),
+
+	CMD_TB_BITMAP_POS	= 11,
 };
 
 #define DEF_CMD_PAYLOAD_SIZE 320
@@ -222,8 +273,18 @@ enum CMD_MODE {
  * aren't fully copied and use other TFD space.
  */
 struct iwl_device_cmd {
-	struct iwl_cmd_header hdr;	/* uCode API */
-	u8 payload[DEF_CMD_PAYLOAD_SIZE];
+	union {
+		struct {
+			struct iwl_cmd_header hdr;	/* uCode API */
+			u8 payload[DEF_CMD_PAYLOAD_SIZE];
+		};
+		struct {
+			struct iwl_cmd_header_wide hdr_wide;
+			u8 payload_wide[DEF_CMD_PAYLOAD_SIZE -
+					sizeof(struct iwl_cmd_header_wide) +
+					sizeof(struct iwl_cmd_header)];
+		};
+	};
 } __packed;
 
 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
@@ -261,24 +322,22 @@ enum iwl_hcmd_dataflag {
  * @resp_pkt: response packet, if %CMD_WANT_SKB was set
  * @_rx_page_order: (internally used to free response packet)
  * @_rx_page_addr: (internally used to free response packet)
- * @handler_status: return value of the handler of the command
- *	(put in setup_rx_handlers) - valid for SYNC mode only
  * @flags: can be CMD_*
  * @len: array of the lengths of the chunks in data
  * @dataflags: IWL_HCMD_DFL_*
- * @id: id of the host command
+ * @id: command id of the host command, for wide commands encoding the
+ *	version and group as well
  */
 struct iwl_host_cmd {
 	const void *data[IWL_MAX_CMD_TBS_PER_TFD];
 	struct iwl_rx_packet *resp_pkt;
 	unsigned long _rx_page_addr;
 	u32 _rx_page_order;
-	int handler_status;
 
 	u32 flags;
+	u32 id;
 	u16 len[IWL_MAX_CMD_TBS_PER_TFD];
 	u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD];
-	u8 id;
 };
 
 static inline void iwl_free_resp(struct iwl_host_cmd *cmd)
@@ -379,6 +438,7 @@ enum iwl_trans_status {
  * @bc_table_dword: set to true if the BC table expects the byte count to be
  *	in DWORD (as opposed to bytes)
  * @scd_set_active: should the transport configure the SCD for HCMD queue
+ * @wide_cmd_header: firmware supports wide host command header
  * @command_names: array of command names, must be 256 entries
  *	(one for each command); for debugging only
  * @sdio_adma_addr: the default address to set for the ADMA in SDIO mode until
@@ -396,6 +456,7 @@ struct iwl_trans_config {
 	bool rx_buf_size_8k;
 	bool bc_table_dword;
 	bool scd_set_active;
+	bool wide_cmd_header;
 	const char *const *command_names;
 
 	u32 sdio_adma_addr;
@@ -544,10 +605,12 @@ struct iwl_trans_ops {
 			      u32 value);
 	void (*ref)(struct iwl_trans *trans);
 	void (*unref)(struct iwl_trans *trans);
-	void (*suspend)(struct iwl_trans *trans);
+	int  (*suspend)(struct iwl_trans *trans);
 	void (*resume)(struct iwl_trans *trans);
 
-	struct iwl_trans_dump_data *(*dump_data)(struct iwl_trans *trans);
+	struct iwl_trans_dump_data *(*dump_data)(struct iwl_trans *trans,
+						 struct iwl_fw_dbg_trigger_tlv
+						 *trigger);
 };
 
 /**
@@ -584,6 +647,8 @@ enum iwl_d0i3_mode {
  * @cfg - pointer to the configuration
  * @status: a bit-mask of transport status flags
  * @dev - pointer to struct device * that represents the device
+ * @max_skb_frags: maximum number of fragments an SKB can have when transmitted.
+ *	0 indicates that frag SKBs (NETIF_F_SG) aren't supported.
  * @hw_id: a u32 with the ID of the device / sub-device.
  *	Set during transport allocation.
  * @hw_id_str: a string with info about HW ID. Set during transport allocation.
@@ -603,6 +668,12 @@ enum iwl_d0i3_mode {
  * @dbg_conf_tlv: array of pointers to configuration TLVs for debug
  * @dbg_trigger_tlv: array of pointers to triggers TLVs for debug
  * @dbg_dest_reg_num: num of reg_ops in %dbg_dest_tlv
+ * @paging_req_addr: The location were the FW will upload / download the pages
+ *	from. The address is set by the opmode
+ * @paging_db: Pointer to the opmode paging data base, the pointer is set by
+ *	the opmode.
+ * @paging_download_buf: Buffer used for copying all of the pages before
+ *	downloading them to the FW. The buffer is allocated in the opmode
  */
 struct iwl_trans {
 	const struct iwl_trans_ops *ops;
@@ -612,6 +683,7 @@ struct iwl_trans {
 	unsigned long status;
 
 	struct device *dev;
+	u32 max_skb_frags;
 	u32 hw_rev;
 	u32 hw_id;
 	char hw_id_str[52];
@@ -639,6 +711,14 @@ struct iwl_trans {
 	struct iwl_fw_dbg_trigger_tlv * const *dbg_trigger_tlv;
 	u8 dbg_dest_reg_num;
 
+	/*
+	 * Paging parameters - All of the parameters should be set by the
+	 * opmode when paging is enabled
+	 */
+	u32 paging_req_addr;
+	struct iwl_fw_paging *paging_db;
+	void *paging_download_buf;
+
 	enum iwl_d0i3_mode d0i3_mode;
 
 	bool wowlan_d0i3;
@@ -730,7 +810,8 @@ static inline void iwl_trans_stop_device(struct iwl_trans *trans)
 static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test)
 {
 	might_sleep();
-	trans->ops->d3_suspend(trans, test);
+	if (trans->ops->d3_suspend)
+		trans->ops->d3_suspend(trans, test);
 }
 
 static inline int iwl_trans_d3_resume(struct iwl_trans *trans,
@@ -738,6 +819,9 @@ static inline int iwl_trans_d3_resume(struct iwl_trans *trans,
 				      bool test)
 {
 	might_sleep();
+	if (!trans->ops->d3_resume)
+		return 0;
+
 	return trans->ops->d3_resume(trans, status, test);
 }
 
@@ -753,10 +837,12 @@ static inline void iwl_trans_unref(struct iwl_trans *trans)
 		trans->ops->unref(trans);
 }
 
-static inline void iwl_trans_suspend(struct iwl_trans *trans)
+static inline int iwl_trans_suspend(struct iwl_trans *trans)
 {
-	if (trans->ops->suspend)
-		trans->ops->suspend(trans);
+	if (!trans->ops->suspend)
+		return 0;
+
+	return trans->ops->suspend(trans);
 }
 
 static inline void iwl_trans_resume(struct iwl_trans *trans)
@@ -766,11 +852,12 @@ static inline void iwl_trans_resume(struct iwl_trans *trans)
 }
 
 static inline struct iwl_trans_dump_data *
-iwl_trans_dump_data(struct iwl_trans *trans)
+iwl_trans_dump_data(struct iwl_trans *trans,
+		    struct iwl_fw_dbg_trigger_tlv *trigger)
 {
 	if (!trans->ops->dump_data)
 		return NULL;
-	return trans->ops->dump_data(trans);
+	return trans->ops->dump_data(trans, trigger);
 }
 
 static inline int iwl_trans_send_cmd(struct iwl_trans *trans,