Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

1 files changed, 183 insertions, 24 deletions

diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index a0b121f..5d05c6f 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -51,6 +51,10 @@ static unsigned long iface_work_flags;
 
 static struct semaphore add_remove_card_sem;
 
+static struct memory_type_mapping generic_mem_type_map[] = {
+	{"DUMP", NULL, 0, 0xDD},
+};
+
 static struct memory_type_mapping mem_type_mapping_tbl[] = {
 	{"ITCM", NULL, 0, 0xF0},
 	{"DTCM", NULL, 0, 0xF1},
@@ -91,6 +95,7 @@ mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
 		return -ENOMEM;
 
 	card->func = func;
+	card->device_id = id;
 
 	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
 
@@ -107,6 +112,7 @@ mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
 		card->mp_tx_agg_buf_size = data->mp_tx_agg_buf_size;
 		card->mp_rx_agg_buf_size = data->mp_rx_agg_buf_size;
 		card->can_dump_fw = data->can_dump_fw;
+		card->fw_dump_enh = data->fw_dump_enh;
 		card->can_auto_tdls = data->can_auto_tdls;
 		card->can_ext_scan = data->can_ext_scan;
 	}
@@ -287,6 +293,8 @@ static int mwifiex_sdio_suspend(struct device *dev)
 #define SDIO_DEVICE_ID_MARVELL_8887   (0x9135)
 /* Device ID for SD8801 */
 #define SDIO_DEVICE_ID_MARVELL_8801   (0x9139)
+/* Device ID for SD8997 */
+#define SDIO_DEVICE_ID_MARVELL_8997   (0x9141)
 
 
 /* WLAN IDs */
@@ -303,6 +311,8 @@ static const struct sdio_device_id mwifiex_ids[] = {
 		.driver_data = (unsigned long)&mwifiex_sdio_sd8887},
 	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8801),
 		.driver_data = (unsigned long)&mwifiex_sdio_sd8801},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8997),
+		.driver_data = (unsigned long)&mwifiex_sdio_sd8997},
 	{},
 };
 
@@ -910,6 +920,8 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
 	if (!fwbuf)
 		return -ENOMEM;
 
+	sdio_claim_host(card->func);
+
 	/* Perform firmware data transfer */
 	do {
 		/* The host polls for the DN_LD_CARD_RDY and CARD_IO_READY
@@ -1014,6 +1026,8 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
 		offset += txlen;
 	} while (true);
 
+	sdio_release_host(card->func);
+
 	mwifiex_dbg(adapter, MSG,
 		    "info: FW download over, size %d bytes\n", offset);
 
@@ -1964,8 +1978,13 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
 	adapter->dev = &func->dev;
 
 	strcpy(adapter->fw_name, card->firmware);
-	adapter->mem_type_mapping_tbl = mem_type_mapping_tbl;
-	adapter->num_mem_types = ARRAY_SIZE(mem_type_mapping_tbl);
+	if (card->fw_dump_enh) {
+		adapter->mem_type_mapping_tbl = generic_mem_type_map;
+		adapter->num_mem_types = 1;
+	} else {
+		adapter->mem_type_mapping_tbl = mem_type_mapping_tbl;
+		adapter->num_mem_types = ARRAY_SIZE(mem_type_mapping_tbl);
+	}
 
 	return 0;
 }
@@ -2107,26 +2126,46 @@ mwifiex_update_mp_end_port(struct mwifiex_adapter *adapter, u16 port)
 		    port, card->mp_data_port_mask);
 }
 
+static void mwifiex_recreate_adapter(struct sdio_mmc_card *card)
+{
+	struct sdio_func *func = card->func;
+	const struct sdio_device_id *device_id = card->device_id;
+
+	/* TODO mmc_hw_reset does not require destroying and re-probing the
+	 * whole adapter. Hence there was no need to for this rube-goldberg
+	 * design to reload the fw from an external workqueue. If we don't
+	 * destroy the adapter we could reload the fw from
+	 * mwifiex_main_work_queue directly.
+	 * The real difficulty with fw reset is to restore all the user
+	 * settings applied through ioctl. By destroying and recreating the
+	 * adapter, we take the easy way out, since we rely on user space to
+	 * restore them. We assume that user space will treat the new
+	 * incarnation of the adapter(interfaces) as if they had been just
+	 * discovered and initializes them from scratch.
+	 */
+
+	mwifiex_sdio_remove(func);
+
+	/* power cycle the adapter */
+	sdio_claim_host(func);
+	mmc_hw_reset(func->card->host);
+	sdio_release_host(func);
+
+	mwifiex_sdio_probe(func, device_id);
+}
+
 static struct mwifiex_adapter *save_adapter;
 static void mwifiex_sdio_card_reset_work(struct mwifiex_adapter *adapter)
 {
 	struct sdio_mmc_card *card = adapter->card;
-	struct mmc_host *target = card->func->card->host;
-
-	/* The actual reset operation must be run outside of driver thread.
-	 * This is because mmc_remove_host() will cause the device to be
-	 * instantly destroyed, and the driver then needs to end its thread,
-	 * leading to a deadlock.
-	 *
-	 * We run it in a totally independent workqueue.
-	 */
 
-	mwifiex_dbg(adapter, WARN, "Resetting card...\n");
-	mmc_remove_host(target);
-	/* 200ms delay is based on experiment with sdhci controller */
-	mdelay(200);
-	target->rescan_entered = 0; /* rescan non-removable cards */
-	mmc_add_host(target);
+	/* TODO card pointer is unprotected. If the adapter is removed
+	 * physically, sdio core might trigger mwifiex_sdio_remove, before this
+	 * workqueue is run, which will destroy the adapter struct. When this
+	 * workqueue eventually exceutes it will dereference an invalid adapter
+	 * pointer
+	 */
+	mwifiex_recreate_adapter(card);
 }
 
 /* This function read/write firmware */
@@ -2138,8 +2177,8 @@ rdwr_status mwifiex_sdio_rdwr_firmware(struct mwifiex_adapter *adapter,
 	int ret, tries;
 	u8 ctrl_data = 0;
 
-	sdio_writeb(card->func, FW_DUMP_HOST_READY, card->reg->fw_dump_ctrl,
-		    &ret);
+	sdio_writeb(card->func, card->reg->fw_dump_host_ready,
+		    card->reg->fw_dump_ctrl, &ret);
 	if (ret) {
 		mwifiex_dbg(adapter, ERROR, "SDIO Write ERR\n");
 		return RDWR_STATUS_FAILURE;
@@ -2155,10 +2194,10 @@ rdwr_status mwifiex_sdio_rdwr_firmware(struct mwifiex_adapter *adapter,
 			break;
 		if (doneflag && ctrl_data == doneflag)
 			return RDWR_STATUS_DONE;
-		if (ctrl_data != FW_DUMP_HOST_READY) {
+		if (ctrl_data != card->reg->fw_dump_host_ready) {
 			mwifiex_dbg(adapter, WARN,
-				    "The ctrl reg was changed, re-try again!\n");
-			sdio_writeb(card->func, FW_DUMP_HOST_READY,
+				    "The ctrl reg was changed, re-try again\n");
+			sdio_writeb(card->func, card->reg->fw_dump_host_ready,
 				    card->reg->fw_dump_ctrl, &ret);
 			if (ret) {
 				mwifiex_dbg(adapter, ERROR, "SDIO write err\n");
@@ -2167,7 +2206,7 @@ rdwr_status mwifiex_sdio_rdwr_firmware(struct mwifiex_adapter *adapter,
 		}
 		usleep_range(100, 200);
 	}
-	if (ctrl_data == FW_DUMP_HOST_READY) {
+	if (ctrl_data == card->reg->fw_dump_host_ready) {
 		mwifiex_dbg(adapter, ERROR,
 			    "Fail to pull ctrl_data\n");
 		return RDWR_STATUS_FAILURE;
@@ -2300,10 +2339,129 @@ done:
 	sdio_release_host(card->func);
 }
 
+static void mwifiex_sdio_generic_fw_dump(struct mwifiex_adapter *adapter)
+{
+	struct sdio_mmc_card *card = adapter->card;
+	struct memory_type_mapping *entry = &generic_mem_type_map[0];
+	unsigned int reg, reg_start, reg_end;
+	u8 start_flag = 0, done_flag = 0;
+	u8 *dbg_ptr, *end_ptr;
+	enum rdwr_status stat;
+	int ret = -1, tries;
+
+	if (!card->fw_dump_enh)
+		return;
+
+	if (entry->mem_ptr) {
+		vfree(entry->mem_ptr);
+		entry->mem_ptr = NULL;
+	}
+	entry->mem_size = 0;
+
+	mwifiex_pm_wakeup_card(adapter);
+	sdio_claim_host(card->func);
+
+	mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump start ==\n");
+
+	stat = mwifiex_sdio_rdwr_firmware(adapter, done_flag);
+	if (stat == RDWR_STATUS_FAILURE)
+		goto done;
+
+	reg_start = card->reg->fw_dump_start;
+	reg_end = card->reg->fw_dump_end;
+	for (reg = reg_start; reg <= reg_end; reg++) {
+		for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
+			start_flag = sdio_readb(card->func, reg, &ret);
+			if (ret) {
+				mwifiex_dbg(adapter, ERROR,
+					    "SDIO read err\n");
+				goto done;
+			}
+			if (start_flag == 0)
+				break;
+			if (tries == MAX_POLL_TRIES) {
+				mwifiex_dbg(adapter, ERROR,
+					    "FW not ready to dump\n");
+				ret = -1;
+				goto done;
+			}
+		}
+		usleep_range(100, 200);
+	}
+
+	entry->mem_ptr = vmalloc(0xf0000 + 1);
+	if (!entry->mem_ptr) {
+		ret = -1;
+		goto done;
+	}
+	dbg_ptr = entry->mem_ptr;
+	entry->mem_size = 0xf0000;
+	end_ptr = dbg_ptr + entry->mem_size;
+
+	done_flag = entry->done_flag;
+	mwifiex_dbg(adapter, DUMP,
+		    "Start %s output, please wait...\n", entry->mem_name);
+
+	while (true) {
+		stat = mwifiex_sdio_rdwr_firmware(adapter, done_flag);
+		if (stat == RDWR_STATUS_FAILURE)
+			goto done;
+		for (reg = reg_start; reg <= reg_end; reg++) {
+			*dbg_ptr = sdio_readb(card->func, reg, &ret);
+			if (ret) {
+				mwifiex_dbg(adapter, ERROR,
+					    "SDIO read err\n");
+				goto done;
+			}
+			dbg_ptr++;
+			if (dbg_ptr >= end_ptr) {
+				u8 *tmp_ptr;
+
+				tmp_ptr = vmalloc(entry->mem_size + 0x4000 + 1);
+				if (!tmp_ptr)
+					goto done;
+
+				memcpy(tmp_ptr, entry->mem_ptr,
+				       entry->mem_size);
+				vfree(entry->mem_ptr);
+				entry->mem_ptr = tmp_ptr;
+				tmp_ptr = NULL;
+				dbg_ptr = entry->mem_ptr + entry->mem_size;
+				entry->mem_size += 0x4000;
+				end_ptr = entry->mem_ptr + entry->mem_size;
+			}
+		}
+		if (stat == RDWR_STATUS_DONE) {
+			entry->mem_size = dbg_ptr - entry->mem_ptr;
+			mwifiex_dbg(adapter, DUMP, "dump %s done size=0x%x\n",
+				    entry->mem_name, entry->mem_size);
+			ret = 0;
+			break;
+		}
+	}
+	mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump end ==\n");
+
+done:
+	if (ret) {
+		mwifiex_dbg(adapter, ERROR, "firmware dump failed\n");
+		if (entry->mem_ptr) {
+			vfree(entry->mem_ptr);
+			entry->mem_ptr = NULL;
+		}
+		entry->mem_size = 0;
+	}
+	sdio_release_host(card->func);
+}
+
 static void mwifiex_sdio_device_dump_work(struct mwifiex_adapter *adapter)
 {
+	struct sdio_mmc_card *card = adapter->card;
+
 	mwifiex_drv_info_dump(adapter);
-	mwifiex_sdio_fw_dump(adapter);
+	if (card->fw_dump_enh)
+		mwifiex_sdio_generic_fw_dump(adapter);
+	else
+		mwifiex_sdio_fw_dump(adapter);
 	mwifiex_upload_device_dump(adapter);
 }
 
@@ -2510,3 +2668,4 @@ MODULE_FIRMWARE(SD8787_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8887_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(SD8997_DEFAULT_FW_NAME);