rtlwifi: Update power-save routines for 062814 driver

Realtek released a new version of the drivers on 06/28/2014. This
patch implements the new power-save code. These changes also force
corresponding changes in the drivers.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

5 files changed, 20 insertions, 21 deletions

diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/Makefile b/drivers/net/wireless/rtlwifi/rtl8188ee/Makefile
index a85419a..5b194e9 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/Makefile
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/Makefile
@@ -5,6 +5,7 @@ rtl8188ee-objs :=		\
 		led.o		\
 		phy.o		\
 		pwrseq.o	\
+		pwrseqcmd.o	\
 		rf.o		\
 		sw.o		\
 		table.o		\
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
index d840ad7..ba639bb 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
@@ -41,6 +41,7 @@
 #include "fw.h"
 #include "led.h"
 #include "hw.h"
+#include "pwrseqcmd.h"
 #include "pwrseq.h"
 
 #define LLT_CONFIG		5
@@ -809,9 +810,9 @@ static bool _rtl88ee_init_mac(struct ieee80211_hw *hw)
 
 	rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00);
 	/* HW Power on sequence */
-	if (!rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
-				      PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
-				      Rtl8188E_NIC_ENABLE_FLOW)) {
+	if (!rtl88_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
+					PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
+					RTL8188E_NIC_ENABLE_FLOW)) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 			 "init MAC Fail as rtl_hal_pwrseqcmdparsing\n");
 		return false;
@@ -1352,9 +1353,9 @@ static void _rtl88ee_poweroff_adapter(struct ieee80211_hw *hw)
 	}
 	rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG+1, 0xFF);
 
-	rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-				 PWR_INTF_PCI_MSK,
-				 Rtl8188E_NIC_LPS_ENTER_FLOW);
+	rtl88_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+				   PWR_INTF_PCI_MSK,
+				   RTL8188E_NIC_LPS_ENTER_FLOW);
 
 	rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00);
 
@@ -1368,8 +1369,8 @@ static void _rtl88ee_poweroff_adapter(struct ieee80211_hw *hw)
 	u1b_tmp = rtl_read_byte(rtlpriv, REG_32K_CTRL);
 	rtl_write_byte(rtlpriv, REG_32K_CTRL, (u1b_tmp & (~BIT(0))));
 
-	rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-				 PWR_INTF_PCI_MSK, Rtl8188E_NIC_DISABLE_FLOW);
+	rtl88_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+				   PWR_INTF_PCI_MSK, RTL8188E_NIC_DISABLE_FLOW);
 
 	u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL+1);
 	rtl_write_byte(rtlpriv, REG_RSV_CTRL+1, (u1b_tmp & (~BIT(3))));
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
index 32e135a..45c7f4a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
@@ -313,14 +313,14 @@ extern struct wlan_pwr_cfg rtl8188e_leave_lps_flow
 		RTL8188E_TRANS_END_STEPS];
 
 /* RTL8723 Power Configuration CMDs for PCIe interface */
-#define Rtl8188E_NIC_PWR_ON_FLOW	rtl8188e_power_on_flow
-#define Rtl8188E_NIC_RF_OFF_FLOW	rtl8188e_radio_off_flow
-#define Rtl8188E_NIC_DISABLE_FLOW	rtl8188e_card_disable_flow
-#define Rtl8188E_NIC_ENABLE_FLOW	rtl8188e_card_enable_flow
-#define Rtl8188E_NIC_SUSPEND_FLOW	rtl8188e_suspend_flow
-#define Rtl8188E_NIC_RESUME_FLOW	rtl8188e_resume_flow
-#define Rtl8188E_NIC_PDN_FLOW		rtl8188e_hwpdn_flow
-#define Rtl8188E_NIC_LPS_ENTER_FLOW	rtl8188e_enter_lps_flow
-#define Rtl8188E_NIC_LPS_LEAVE_FLOW	rtl8188e_leave_lps_flow
+#define RTL8188E_NIC_PWR_ON_FLOW	rtl8188e_power_on_flow
+#define RTL8188E_NIC_RF_OFF_FLOW	rtl8188e_radio_off_flow
+#define RTL8188E_NIC_DISABLE_FLOW	rtl8188e_card_disable_flow
+#define RTL8188E_NIC_ENABLE_FLOW	rtl8188e_card_enable_flow
+#define RTL8188E_NIC_SUSPEND_FLOW	rtl8188e_suspend_flow
+#define RTL8188E_NIC_RESUME_FLOW	rtl8188e_resume_flow
+#define RTL8188E_NIC_PDN_FLOW		rtl8188e_hwpdn_flow
+#define RTL8188E_NIC_LPS_ENTER_FLOW	rtl8188e_enter_lps_flow
+#define RTL8188E_NIC_LPS_LEAVE_FLOW	rtl8188e_leave_lps_flow
 
 #endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.c b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.c
index 0f93142..3a95ddb 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.c
@@ -27,6 +27,7 @@
  *
  *****************************************************************************/
 
+#include "pwrseqcmd.h"
 #include "pwrseq.h"
 
 
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.h b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.h
index d9ae280..a6cdb0d 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.h
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.h
@@ -11,10 +11,6 @@
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
  * The full GNU General Public License is included in this distribution in the
  * file called LICENSE.
  *