Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...

23 files changed, 667 insertions, 500 deletions

diff --git a/drivers/net/wireless/ti/Kconfig b/drivers/net/wireless/ti/Kconfig
index cbe1e7f..92fbd65 100644
--- a/drivers/net/wireless/ti/Kconfig
+++ b/drivers/net/wireless/ti/Kconfig
@@ -1,11 +1,15 @@
-menuconfig WL_TI
-	bool "TI Wireless LAN support"
+config WLAN_VENDOR_TI
+	bool "Texas Instrument devices"
+	default y
 	---help---
-	  This section contains support for all the wireless drivers
-	  for Texas Instruments WLAN chips, such as wl1251 and the wl12xx
-	  family.
+	  If you have a wireless card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about  cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
 
-if WL_TI
+if WLAN_VENDOR_TI
 source "drivers/net/wireless/ti/wl1251/Kconfig"
 source "drivers/net/wireless/ti/wl12xx/Kconfig"
 source "drivers/net/wireless/ti/wl18xx/Kconfig"
@@ -21,4 +25,4 @@ config WILINK_PLATFORM_DATA
 	Small platform data bit needed to pass data to the sdio modules.
 
 
-endif # WL_TI
+endif # WLAN_VENDOR_TI
diff --git a/drivers/net/wireless/ti/wl1251/Kconfig b/drivers/net/wireless/ti/wl1251/Kconfig
index 477a206..7142ccf 100644
--- a/drivers/net/wireless/ti/wl1251/Kconfig
+++ b/drivers/net/wireless/ti/wl1251/Kconfig
@@ -1,4 +1,4 @@
-menuconfig WL1251
+config WL1251
 	tristate "TI wl1251 driver support"
 	depends on MAC80211
 	select FW_LOADER
diff --git a/drivers/net/wireless/ti/wl12xx/conf.h b/drivers/net/wireless/ti/wl12xx/conf.h
index 75e2989..a606ba9 100644
--- a/drivers/net/wireless/ti/wl12xx/conf.h
+++ b/drivers/net/wireless/ti/wl12xx/conf.h
@@ -47,4 +47,237 @@ struct wl12xx_priv_conf {
 	struct conf_memory_settings mem_wl127x;
 };
 
+enum wl12xx_sg_params {
+	/*
+	* Configure the min and max time BT gains the antenna
+	* in WLAN / BT master basic rate
+	*
+	* Range: 0 - 255 (ms)
+	*/
+	WL12XX_CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
+	WL12XX_CONF_SG_ACL_BT_MASTER_MAX_BR,
+
+	/*
+	* Configure the min and max time BT gains the antenna
+	* in WLAN / BT slave basic rate
+	*
+	* Range: 0 - 255 (ms)
+	*/
+	WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_BR,
+	WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_BR,
+
+	/*
+	* Configure the min and max time BT gains the antenna
+	* in WLAN / BT master EDR
+	*
+	* Range: 0 - 255 (ms)
+	*/
+	WL12XX_CONF_SG_ACL_BT_MASTER_MIN_EDR,
+	WL12XX_CONF_SG_ACL_BT_MASTER_MAX_EDR,
+
+	/*
+	* Configure the min and max time BT gains the antenna
+	* in WLAN / BT slave EDR
+	*
+	* Range: 0 - 255 (ms)
+	*/
+	WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_EDR,
+	WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_EDR,
+
+	/*
+	* The maximum time WLAN can gain the antenna
+	* in WLAN PSM / BT master/slave BR
+	*
+	* Range: 0 - 255 (ms)
+	*/
+	WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_BR,
+	WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_BR,
+
+	/*
+	* The maximum time WLAN can gain the antenna
+	* in WLAN PSM / BT master/slave EDR
+	*
+	* Range: 0 - 255 (ms)
+	*/
+	WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_EDR,
+	WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_EDR,
+
+	/* TODO: explain these values */
+	WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
+	WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
+	WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
+	WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
+	WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
+	WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
+	WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
+	WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,
+
+	WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
+	WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
+	WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
+	WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
+	WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
+	WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,
+
+	/*
+	* Compensation percentage of probe requests when scan initiated
+	* during BT voice/ACL link.
+	*
+	* Range: 0 - 255 (%)
+	*/
+	WL12XX_CONF_SG_AUTO_SCAN_PROBE_REQ,
+
+	/*
+	* Compensation percentage of probe requests when active scan initiated
+	* during BT voice
+	*
+	* Range: 0 - 255 (%)
+	*/
+	WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
+
+	/*
+	* Compensation percentage of WLAN active scan window if initiated
+	* during BT A2DP
+	*
+	* Range: 0 - 1000 (%)
+	*/
+	WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
+
+	/*
+	* Compensation percentage of WLAN passive scan window if initiated
+	* during BT A2DP BR
+	*
+	* Range: 0 - 1000 (%)
+	*/
+	WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_BR,
+
+	/*
+	* Compensation percentage of WLAN passive scan window if initiated
+	* during BT A2DP EDR
+	*
+	* Range: 0 - 1000 (%)
+	*/
+	WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_EDR,
+
+	/*
+	* Compensation percentage of WLAN passive scan window if initiated
+	* during BT voice
+	*
+	* Range: 0 - 1000 (%)
+	*/
+	WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_HV3,
+
+	/* TODO: explain these values */
+	WL12XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
+	WL12XX_CONF_SG_BCN_HV3_COLL_THR_IN_PASSIVE_SCAN,
+	WL12XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN,
+
+	/*
+	* Defines whether the SG will force WLAN host to enter/exit PSM
+	*
+	* Range: 1 - SG can force, 0 - host handles PSM
+	*/
+	WL12XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO,
+
+	/*
+	* Defines antenna configuration (single/dual antenna)
+	*
+	* Range: 0 - single antenna, 1 - dual antenna
+	*/
+	WL12XX_CONF_SG_ANTENNA_CONFIGURATION,
+
+	/*
+	* The threshold (percent) of max consecutive beacon misses before
+	* increasing priority of beacon reception.
+	*
+	* Range: 0 - 100 (%)
+	*/
+	WL12XX_CONF_SG_BEACON_MISS_PERCENT,
+
+	/*
+	* Protection time of the DHCP procedure.
+	*
+	* Range: 0 - 100000 (ms)
+	*/
+	WL12XX_CONF_SG_DHCP_TIME,
+
+	/*
+	* RX guard time before the beginning of a new BT voice frame during
+	* which no new WLAN trigger frame is transmitted.
+	*
+	* Range: 0 - 100000 (us)
+	*/
+	WL12XX_CONF_SG_RXT,
+
+	/*
+	* TX guard time before the beginning of a new BT voice frame during
+	* which no new WLAN frame is transmitted.
+	*
+	* Range: 0 - 100000 (us)
+	*/
+	WL12XX_CONF_SG_TXT,
+
+	/*
+	* Enable adaptive RXT/TXT algorithm. If disabled, the host values
+	* will be utilized.
+	*
+	* Range: 0 - disable, 1 - enable
+	*/
+	WL12XX_CONF_SG_ADAPTIVE_RXT_TXT,
+
+	/* TODO: explain this value */
+	WL12XX_CONF_SG_GENERAL_USAGE_BIT_MAP,
+
+	/*
+	* Number of consecutive BT voice frames not interrupted by WLAN
+	*
+	* Range: 0 - 100
+	*/
+	WL12XX_CONF_SG_HV3_MAX_SERVED,
+
+	/*
+	* The used WLAN legacy service period during active BT ACL link
+	*
+	* Range: 0 - 255 (ms)
+	*/
+	WL12XX_CONF_SG_PS_POLL_TIMEOUT,
+
+	/*
+	* The used WLAN UPSD service period during active BT ACL link
+	*
+	* Range: 0 - 255 (ms)
+	*/
+	WL12XX_CONF_SG_UPSD_TIMEOUT,
+
+	WL12XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
+	WL12XX_CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
+	WL12XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME,
+
+	/* AP params */
+	WL12XX_CONF_AP_BEACON_MISS_TX,
+	WL12XX_CONF_AP_RX_WINDOW_AFTER_BEACON,
+	WL12XX_CONF_AP_BEACON_WINDOW_INTERVAL,
+	WL12XX_CONF_AP_CONNECTION_PROTECTION_TIME,
+	WL12XX_CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
+	WL12XX_CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,
+
+	/* CTS Diluting params */
+	WL12XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
+	WL12XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,
+
+	WL12XX_CONF_SG_TEMP_PARAM_1,
+	WL12XX_CONF_SG_TEMP_PARAM_2,
+	WL12XX_CONF_SG_TEMP_PARAM_3,
+	WL12XX_CONF_SG_TEMP_PARAM_4,
+	WL12XX_CONF_SG_TEMP_PARAM_5,
+	WL12XX_CONF_SG_TEMP_PARAM_6,
+	WL12XX_CONF_SG_TEMP_PARAM_7,
+	WL12XX_CONF_SG_TEMP_PARAM_8,
+	WL12XX_CONF_SG_TEMP_PARAM_9,
+	WL12XX_CONF_SG_TEMP_PARAM_10,
+
+	WL12XX_CONF_SG_PARAMS_MAX,
+	WL12XX_CONF_SG_PARAMS_ALL = 0xff
+};
+
 #endif /* __WL12XX_CONF_H__ */
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index af0fe2e..a0d6ccc 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -39,6 +39,7 @@
 #include "scan.h"
 #include "event.h"
 #include "debugfs.h"
+#include "conf.h"
 
 static char *fref_param;
 static char *tcxo_param;
@@ -46,69 +47,69 @@ static char *tcxo_param;
 static struct wlcore_conf wl12xx_conf = {
 	.sg = {
 		.params = {
-			[CONF_SG_ACL_BT_MASTER_MIN_BR] = 10,
-			[CONF_SG_ACL_BT_MASTER_MAX_BR] = 180,
-			[CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10,
-			[CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180,
-			[CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10,
-			[CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80,
-			[CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10,
-			[CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80,
-			[CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8,
-			[CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8,
-			[CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20,
-			[CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20,
-			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20,
-			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35,
-			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16,
-			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35,
-			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32,
-			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50,
-			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28,
-			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50,
-			[CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10,
-			[CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20,
-			[CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75,
-			[CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15,
-			[CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27,
-			[CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17,
+			[WL12XX_CONF_SG_ACL_BT_MASTER_MIN_BR] = 10,
+			[WL12XX_CONF_SG_ACL_BT_MASTER_MAX_BR] = 180,
+			[WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10,
+			[WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180,
+			[WL12XX_CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10,
+			[WL12XX_CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80,
+			[WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10,
+			[WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80,
+			[WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8,
+			[WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8,
+			[WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20,
+			[WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20,
+			[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20,
+			[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35,
+			[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16,
+			[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35,
+			[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32,
+			[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50,
+			[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28,
+			[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50,
+			[WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10,
+			[WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20,
+			[WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75,
+			[WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15,
+			[WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27,
+			[WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17,
 			/* active scan params */
-			[CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
-			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
-			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
+			[WL12XX_CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
+			[WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
+			[WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
 			/* passive scan params */
-			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR] = 800,
-			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR] = 200,
-			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
+			[WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_BR] = 800,
+			[WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_EDR] = 200,
+			[WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_HV3] = 200,
 			/* passive scan in dual antenna params */
-			[CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
-			[CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN] = 0,
-			[CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN] = 0,
+			[WL12XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
+			[WL12XX_CONF_SG_BCN_HV3_COLL_THR_IN_PASSIVE_SCAN] = 0,
+			[WL12XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN] = 0,
 			/* general params */
-			[CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
-			[CONF_SG_ANTENNA_CONFIGURATION] = 0,
-			[CONF_SG_BEACON_MISS_PERCENT] = 60,
-			[CONF_SG_DHCP_TIME] = 5000,
-			[CONF_SG_RXT] = 1200,
-			[CONF_SG_TXT] = 1000,
-			[CONF_SG_ADAPTIVE_RXT_TXT] = 1,
-			[CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
-			[CONF_SG_HV3_MAX_SERVED] = 6,
-			[CONF_SG_PS_POLL_TIMEOUT] = 10,
-			[CONF_SG_UPSD_TIMEOUT] = 10,
-			[CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
-			[CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5,
-			[CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30,
+			[WL12XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
+			[WL12XX_CONF_SG_ANTENNA_CONFIGURATION] = 0,
+			[WL12XX_CONF_SG_BEACON_MISS_PERCENT] = 60,
+			[WL12XX_CONF_SG_DHCP_TIME] = 5000,
+			[WL12XX_CONF_SG_RXT] = 1200,
+			[WL12XX_CONF_SG_TXT] = 1000,
+			[WL12XX_CONF_SG_ADAPTIVE_RXT_TXT] = 1,
+			[WL12XX_CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
+			[WL12XX_CONF_SG_HV3_MAX_SERVED] = 6,
+			[WL12XX_CONF_SG_PS_POLL_TIMEOUT] = 10,
+			[WL12XX_CONF_SG_UPSD_TIMEOUT] = 10,
+			[WL12XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
+			[WL12XX_CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5,
+			[WL12XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30,
 			/* AP params */
-			[CONF_AP_BEACON_MISS_TX] = 3,
-			[CONF_AP_RX_WINDOW_AFTER_BEACON] = 10,
-			[CONF_AP_BEACON_WINDOW_INTERVAL] = 2,
-			[CONF_AP_CONNECTION_PROTECTION_TIME] = 0,
-			[CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25,
-			[CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25,
+			[WL12XX_CONF_AP_BEACON_MISS_TX] = 3,
+			[WL12XX_CONF_AP_RX_WINDOW_AFTER_BEACON] = 10,
+			[WL12XX_CONF_AP_BEACON_WINDOW_INTERVAL] = 2,
+			[WL12XX_CONF_AP_CONNECTION_PROTECTION_TIME] = 0,
+			[WL12XX_CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25,
+			[WL12XX_CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25,
 			/* CTS Diluting params */
-			[CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0,
-			[CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0,
+			[WL12XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0,
+			[WL12XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0,
 		},
 		.state = CONF_SG_PROTECTIVE,
 	},
@@ -1809,6 +1810,7 @@ static int wl12xx_setup(struct wl1271 *wl)
 
 	BUILD_BUG_ON(WL12XX_MAX_LINKS > WLCORE_MAX_LINKS);
 	BUILD_BUG_ON(WL12XX_MAX_AP_STATIONS > WL12XX_MAX_LINKS);
+	BUILD_BUG_ON(WL12XX_CONF_SG_PARAMS_MAX > WLCORE_CONF_SG_PARAMS_MAX);
 
 	wl->rtable = wl12xx_rtable;
 	wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS;
diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h
index 71f1ec4..7aa880f 100644
--- a/drivers/net/wireless/ti/wl18xx/conf.h
+++ b/drivers/net/wireless/ti/wl18xx/conf.h
@@ -139,4 +139,94 @@ struct wl18xx_priv_conf {
 	struct conf_ap_sleep_settings ap_sleep;
 } __packed;
 
+enum wl18xx_sg_params {
+	WL18XX_CONF_SG_PARAM_0 = 0,
+
+	/* Configuration Parameters */
+	WL18XX_CONF_SG_ANTENNA_CONFIGURATION,
+	WL18XX_CONF_SG_ZIGBEE_COEX,
+	WL18XX_CONF_SG_TIME_SYNC,
+
+	WL18XX_CONF_SG_PARAM_4,
+	WL18XX_CONF_SG_PARAM_5,
+	WL18XX_CONF_SG_PARAM_6,
+	WL18XX_CONF_SG_PARAM_7,
+	WL18XX_CONF_SG_PARAM_8,
+	WL18XX_CONF_SG_PARAM_9,
+	WL18XX_CONF_SG_PARAM_10,
+	WL18XX_CONF_SG_PARAM_11,
+	WL18XX_CONF_SG_PARAM_12,
+	WL18XX_CONF_SG_PARAM_13,
+	WL18XX_CONF_SG_PARAM_14,
+	WL18XX_CONF_SG_PARAM_15,
+	WL18XX_CONF_SG_PARAM_16,
+	WL18XX_CONF_SG_PARAM_17,
+	WL18XX_CONF_SG_PARAM_18,
+	WL18XX_CONF_SG_PARAM_19,
+	WL18XX_CONF_SG_PARAM_20,
+	WL18XX_CONF_SG_PARAM_21,
+	WL18XX_CONF_SG_PARAM_22,
+	WL18XX_CONF_SG_PARAM_23,
+	WL18XX_CONF_SG_PARAM_24,
+	WL18XX_CONF_SG_PARAM_25,
+
+	/* Active Scan Parameters */
+	WL18XX_CONF_SG_AUTO_SCAN_PROBE_REQ,
+	WL18XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
+
+	WL18XX_CONF_SG_PARAM_28,
+
+	/* Passive Scan Parameters */
+	WL18XX_CONF_SG_PARAM_29,
+	WL18XX_CONF_SG_PARAM_30,
+	WL18XX_CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
+
+	/* Passive Scan in Dual Antenna Parameters */
+	WL18XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
+	WL18XX_CONF_SG_BEACON_HV3_COLL_TH_IN_PASSIVE_SCAN,
+	WL18XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN,
+
+	/* General Parameters */
+	WL18XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO,
+	WL18XX_CONF_SG_PARAM_36,
+	WL18XX_CONF_SG_BEACON_MISS_PERCENT,
+	WL18XX_CONF_SG_PARAM_38,
+	WL18XX_CONF_SG_RXT,
+	WL18XX_CONF_SG_UNUSED,
+	WL18XX_CONF_SG_ADAPTIVE_RXT_TXT,
+	WL18XX_CONF_SG_GENERAL_USAGE_BIT_MAP,
+	WL18XX_CONF_SG_HV3_MAX_SERVED,
+	WL18XX_CONF_SG_PARAM_44,
+	WL18XX_CONF_SG_PARAM_45,
+	WL18XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
+	WL18XX_CONF_SG_GEMINI_PARAM_47,
+	WL18XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME,
+
+	/* AP Parameters */
+	WL18XX_CONF_SG_AP_BEACON_MISS_TX,
+	WL18XX_CONF_SG_PARAM_50,
+	WL18XX_CONF_SG_AP_BEACON_WINDOW_INTERVAL,
+	WL18XX_CONF_SG_AP_CONNECTION_PROTECTION_TIME,
+	WL18XX_CONF_SG_PARAM_53,
+	WL18XX_CONF_SG_PARAM_54,
+
+	/* CTS Diluting Parameters */
+	WL18XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
+	WL18XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,
+
+	WL18XX_CONF_SG_TEMP_PARAM_1,
+	WL18XX_CONF_SG_TEMP_PARAM_2,
+	WL18XX_CONF_SG_TEMP_PARAM_3,
+	WL18XX_CONF_SG_TEMP_PARAM_4,
+	WL18XX_CONF_SG_TEMP_PARAM_5,
+	WL18XX_CONF_SG_TEMP_PARAM_6,
+	WL18XX_CONF_SG_TEMP_PARAM_7,
+	WL18XX_CONF_SG_TEMP_PARAM_8,
+	WL18XX_CONF_SG_TEMP_PARAM_9,
+	WL18XX_CONF_SG_TEMP_PARAM_10,
+
+	WL18XX_CONF_SG_PARAMS_MAX,
+	WL18XX_CONF_SG_PARAMS_ALL = 0xff
+};
+
 #endif /* __WL18XX_CONF_H__ */
diff --git a/drivers/net/wireless/ti/wl18xx/event.c b/drivers/net/wireless/ti/wl18xx/event.c
index 09c7e09..719907a 100644
--- a/drivers/net/wireless/ti/wl18xx/event.c
+++ b/drivers/net/wireless/ti/wl18xx/event.c
@@ -205,6 +205,8 @@ int wl18xx_process_mailbox_events(struct wl1271 *wl)
 						 mbox->sc_ssid,
 						 mbox->sc_pwd_len,
 						 mbox->sc_pwd);
+	if (vector & FW_LOGGER_INDICATION)
+		wlcore_event_fw_logger(wl);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/ti/wl18xx/event.h b/drivers/net/wireless/ti/wl18xx/event.h
index f3d4f13..070de12 100644
--- a/drivers/net/wireless/ti/wl18xx/event.h
+++ b/drivers/net/wireless/ti/wl18xx/event.h
@@ -41,6 +41,7 @@ enum {
 	SMART_CONFIG_SYNC_EVENT_ID               = BIT(22),
 	SMART_CONFIG_DECODE_EVENT_ID             = BIT(23),
 	TIME_SYNC_EVENT_ID                       = BIT(24),
+	FW_LOGGER_INDICATION			= BIT(25),
 };
 
 enum wl18xx_radar_types {
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 50cce42..1bf26cc 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -177,69 +177,80 @@ enum wl18xx_hw_rates {
 static struct wlcore_conf wl18xx_conf = {
 	.sg = {
 		.params = {
-			[CONF_SG_ACL_BT_MASTER_MIN_BR] = 10,
-			[CONF_SG_ACL_BT_MASTER_MAX_BR] = 180,
-			[CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10,
-			[CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180,
-			[CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10,
-			[CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80,
-			[CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10,
-			[CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80,
-			[CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8,
-			[CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8,
-			[CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20,
-			[CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20,
-			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20,
-			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35,
-			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16,
-			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35,
-			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32,
-			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50,
-			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28,
-			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50,
-			[CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10,
-			[CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20,
-			[CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75,
-			[CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15,
-			[CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27,
-			[CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17,
-			/* active scan params */
-			[CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
-			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
-			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
-			/* passive scan params */
-			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR] = 800,
-			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR] = 200,
-			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
-			/* passive scan in dual antenna params */
-			[CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
-			[CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN] = 0,
-			[CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN] = 0,
-			/* general params */
-			[CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
-			[CONF_SG_ANTENNA_CONFIGURATION] = 0,
-			[CONF_SG_BEACON_MISS_PERCENT] = 60,
-			[CONF_SG_DHCP_TIME] = 5000,
-			[CONF_SG_RXT] = 1200,
-			[CONF_SG_TXT] = 1000,
-			[CONF_SG_ADAPTIVE_RXT_TXT] = 1,
-			[CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
-			[CONF_SG_HV3_MAX_SERVED] = 6,
-			[CONF_SG_PS_POLL_TIMEOUT] = 10,
-			[CONF_SG_UPSD_TIMEOUT] = 10,
-			[CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
-			[CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5,
-			[CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30,
-			/* AP params */
-			[CONF_AP_BEACON_MISS_TX] = 3,
-			[CONF_AP_RX_WINDOW_AFTER_BEACON] = 10,
-			[CONF_AP_BEACON_WINDOW_INTERVAL] = 2,
-			[CONF_AP_CONNECTION_PROTECTION_TIME] = 0,
-			[CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25,
-			[CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25,
-			/* CTS Diluting params */
-			[CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0,
-			[CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0,
+			[WL18XX_CONF_SG_PARAM_0] = 0,
+			/* Configuartion Parameters */
+			[WL18XX_CONF_SG_ANTENNA_CONFIGURATION] = 0,
+			[WL18XX_CONF_SG_ZIGBEE_COEX] = 0,
+			[WL18XX_CONF_SG_TIME_SYNC] = 0,
+			[WL18XX_CONF_SG_PARAM_4] = 0,
+			[WL18XX_CONF_SG_PARAM_5] = 0,
+			[WL18XX_CONF_SG_PARAM_6] = 0,
+			[WL18XX_CONF_SG_PARAM_7] = 0,
+			[WL18XX_CONF_SG_PARAM_8] = 0,
+			[WL18XX_CONF_SG_PARAM_9] = 0,
+			[WL18XX_CONF_SG_PARAM_10] = 0,
+			[WL18XX_CONF_SG_PARAM_11] = 0,
+			[WL18XX_CONF_SG_PARAM_12] = 0,
+			[WL18XX_CONF_SG_PARAM_13] = 0,
+			[WL18XX_CONF_SG_PARAM_14] = 0,
+			[WL18XX_CONF_SG_PARAM_15] = 0,
+			[WL18XX_CONF_SG_PARAM_16] = 0,
+			[WL18XX_CONF_SG_PARAM_17] = 0,
+			[WL18XX_CONF_SG_PARAM_18] = 0,
+			[WL18XX_CONF_SG_PARAM_19] = 0,
+			[WL18XX_CONF_SG_PARAM_20] = 0,
+			[WL18XX_CONF_SG_PARAM_21] = 0,
+			[WL18XX_CONF_SG_PARAM_22] = 0,
+			[WL18XX_CONF_SG_PARAM_23] = 0,
+			[WL18XX_CONF_SG_PARAM_24] = 0,
+			[WL18XX_CONF_SG_PARAM_25] = 0,
+			/* Active Scan Parameters */
+			[WL18XX_CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
+			[WL18XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
+			[WL18XX_CONF_SG_PARAM_28] = 0,
+			/* Passive Scan Parameters */
+			[WL18XX_CONF_SG_PARAM_29] = 0,
+			[WL18XX_CONF_SG_PARAM_30] = 0,
+			[WL18XX_CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
+			/* Passive Scan in Dual Antenna Parameters */
+			[WL18XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
+			[WL18XX_CONF_SG_BEACON_HV3_COLL_TH_IN_PASSIVE_SCAN] = 0,
+			[WL18XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN] = 0,
+			/* General Parameters */
+			[WL18XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
+			[WL18XX_CONF_SG_PARAM_36] = 0,
+			[WL18XX_CONF_SG_BEACON_MISS_PERCENT] = 60,
+			[WL18XX_CONF_SG_PARAM_38] = 0,
+			[WL18XX_CONF_SG_RXT] = 1200,
+			[WL18XX_CONF_SG_UNUSED] = 0,
+			[WL18XX_CONF_SG_ADAPTIVE_RXT_TXT] = 1,
+			[WL18XX_CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
+			[WL18XX_CONF_SG_HV3_MAX_SERVED] = 6,
+			[WL18XX_CONF_SG_PARAM_44] = 0,
+			[WL18XX_CONF_SG_PARAM_45] = 0,
+			[WL18XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
+			[WL18XX_CONF_SG_GEMINI_PARAM_47] = 0,
+			[WL18XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 0,
+			/* AP Parameters */
+			[WL18XX_CONF_SG_AP_BEACON_MISS_TX] = 3,
+			[WL18XX_CONF_SG_PARAM_50] = 0,
+			[WL18XX_CONF_SG_AP_BEACON_WINDOW_INTERVAL] = 2,
+			[WL18XX_CONF_SG_AP_CONNECTION_PROTECTION_TIME] = 30,
+			[WL18XX_CONF_SG_PARAM_53] = 0,
+			[WL18XX_CONF_SG_PARAM_54] = 0,
+			/* CTS Diluting Parameters */
+			[WL18XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0,
+			[WL18XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0,
+			[WL18XX_CONF_SG_TEMP_PARAM_1] = 0,
+			[WL18XX_CONF_SG_TEMP_PARAM_2] = 0,
+			[WL18XX_CONF_SG_TEMP_PARAM_3] = 0,
+			[WL18XX_CONF_SG_TEMP_PARAM_4] = 0,
+			[WL18XX_CONF_SG_TEMP_PARAM_5] = 0,
+			[WL18XX_CONF_SG_TEMP_PARAM_6] = 0,
+			[WL18XX_CONF_SG_TEMP_PARAM_7] = 0,
+			[WL18XX_CONF_SG_TEMP_PARAM_8] = 0,
+			[WL18XX_CONF_SG_TEMP_PARAM_9] = 0,
+			[WL18XX_CONF_SG_TEMP_PARAM_10] = 0,
 		},
 		.state = CONF_SG_PROTECTIVE,
 	},
@@ -461,7 +472,7 @@ static struct wlcore_conf wl18xx_conf = {
 	},
 	.fwlog = {
 		.mode                         = WL12XX_FWLOG_CONTINUOUS,
-		.mem_blocks                   = 2,
+		.mem_blocks                   = 0,
 		.severity                     = 0,
 		.timestamp                    = WL12XX_FWLOG_TIMESTAMP_DISABLED,
 		.output                       = WL12XX_FWLOG_OUTPUT_DBG_PINS,
@@ -584,7 +595,7 @@ static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = {
 		.mem  = { .start = 0x00A00000, .size  = 0x00012000 },
 		.reg  = { .start = 0x00807000, .size  = 0x00005000 },
 		.mem2 = { .start = 0x00800000, .size  = 0x0000B000 },
-		.mem3 = { .start = 0x00000000, .size  = 0x00000000 },
+		.mem3 = { .start = 0x00401594, .size  = 0x00001020 },
 	},
 	[PART_DOWN] = {
 		.mem  = { .start = 0x00000000, .size  = 0x00014000 },
@@ -602,7 +613,7 @@ static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = {
 		.mem  = { .start = 0x00800000, .size  = 0x000050FC },
 		.reg  = { .start = 0x00B00404, .size  = 0x00001000 },
 		.mem2 = { .start = 0x00C00000, .size  = 0x00000400 },
-		.mem3 = { .start = 0x00000000, .size  = 0x00000000 },
+		.mem3 = { .start = 0x00401594, .size  = 0x00001020 },
 	},
 	[PART_PHY_INIT] = {
 		.mem  = { .start = WL18XX_PHY_INIT_MEM_ADDR,
@@ -1029,7 +1040,8 @@ static int wl18xx_boot(struct wl1271 *wl)
 		DFS_CHANNELS_CONFIG_COMPLETE_EVENT |
 		SMART_CONFIG_SYNC_EVENT_ID |
 		SMART_CONFIG_DECODE_EVENT_ID |
-		TIME_SYNC_EVENT_ID;
+		TIME_SYNC_EVENT_ID |
+		FW_LOGGER_INDICATION;
 
 	wl->ap_event_mask = MAX_TX_FAILURE_EVENT_ID;
 
@@ -1895,6 +1907,7 @@ static int wl18xx_setup(struct wl1271 *wl)
 
 	BUILD_BUG_ON(WL18XX_MAX_LINKS > WLCORE_MAX_LINKS);
 	BUILD_BUG_ON(WL18XX_MAX_AP_STATIONS > WL18XX_MAX_LINKS);
+	BUILD_BUG_ON(WL18XX_CONF_SG_PARAMS_MAX > WLCORE_CONF_SG_PARAMS_MAX);
 
 	wl->rtable = wl18xx_rtable;
 	wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS;
diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig
index 7c09954..969c9d7 100644
--- a/drivers/net/wireless/ti/wlcore/Kconfig
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
@@ -1,6 +1,6 @@
 config WLCORE
 	tristate "TI wlcore support"
-	depends on WL_TI && MAC80211
+	depends on MAC80211
 	select FW_LOADER
 	---help---
 	  This module contains the main code for TI WLAN chips.  It abstracts
diff --git a/drivers/net/wireless/ti/wlcore/acx.c b/drivers/net/wireless/ti/wlcore/acx.c
index f28fa3b..26cc23f 100644
--- a/drivers/net/wireless/ti/wlcore/acx.c
+++ b/drivers/net/wireless/ti/wlcore/acx.c
@@ -534,9 +534,9 @@ int wl12xx_acx_sg_cfg(struct wl1271 *wl)
 	}
 
 	/* BT-WLAN coext parameters */
-	for (i = 0; i < CONF_SG_PARAMS_MAX; i++)
+	for (i = 0; i < WLCORE_CONF_SG_PARAMS_MAX; i++)
 		param->params[i] = cpu_to_le32(c->params[i]);
-	param->param_idx = CONF_SG_PARAMS_ALL;
+	param->param_idx = WLCORE_CONF_SG_PARAMS_ALL;
 
 	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
 	if (ret < 0) {
diff --git a/drivers/net/wireless/ti/wlcore/acx.h b/drivers/net/wireless/ti/wlcore/acx.h
index 954d57e..0d61fae 100644
--- a/drivers/net/wireless/ti/wlcore/acx.h
+++ b/drivers/net/wireless/ti/wlcore/acx.h
@@ -300,7 +300,7 @@ struct acx_bt_wlan_coex {
 struct acx_bt_wlan_coex_param {
 	struct acx_header header;
 
-	__le32 params[CONF_SG_PARAMS_MAX];
+	__le32 params[WLCORE_CONF_SG_PARAMS_MAX];
 	u8 param_idx;
 	u8 padding[3];
 } __packed;
diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h
index 8dc46c0..e28e2f23 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.h
+++ b/drivers/net/wireless/ti/wlcore/cmd.h
@@ -626,7 +626,6 @@ struct wl12xx_cmd_remove_peer {
  */
 enum wl12xx_fwlogger_log_mode {
 	WL12XX_FWLOG_CONTINUOUS,
-	WL12XX_FWLOG_ON_DEMAND
 };
 
 /* Include/exclude timestamps from the log messages */
diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h
index 52a9d1b..44d898f 100644
--- a/drivers/net/wireless/ti/wlcore/conf.h
+++ b/drivers/net/wireless/ti/wlcore/conf.h
@@ -110,242 +110,11 @@ enum {
 	CONF_SG_OPPORTUNISTIC
 };
 
-enum {
-	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN / BT master basic rate
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
-	CONF_SG_ACL_BT_MASTER_MAX_BR,
-
-	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN / BT slave basic rate
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_ACL_BT_SLAVE_MIN_BR,
-	CONF_SG_ACL_BT_SLAVE_MAX_BR,
-
-	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN / BT master EDR
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_ACL_BT_MASTER_MIN_EDR,
-	CONF_SG_ACL_BT_MASTER_MAX_EDR,
-
-	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN / BT slave EDR
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_ACL_BT_SLAVE_MIN_EDR,
-	CONF_SG_ACL_BT_SLAVE_MAX_EDR,
-
-	/*
-	 * The maximum time WLAN can gain the antenna
-	 * in WLAN PSM / BT master/slave BR
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_ACL_WLAN_PS_MASTER_BR,
-	CONF_SG_ACL_WLAN_PS_SLAVE_BR,
-
-	/*
-	 * The maximum time WLAN can gain the antenna
-	 * in WLAN PSM / BT master/slave EDR
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_ACL_WLAN_PS_MASTER_EDR,
-	CONF_SG_ACL_WLAN_PS_SLAVE_EDR,
-
-	/* TODO: explain these values */
-	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
-	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
-	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
-	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
-	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
-	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
-	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
-	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,
-
-	CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
-	CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
-	CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
-	CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
-	CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
-	CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,
-
-	/*
-	 * Compensation percentage of probe requests when scan initiated
-	 * during BT voice/ACL link.
-	 *
-	 * Range: 0 - 255 (%)
-	 */
-	CONF_SG_AUTO_SCAN_PROBE_REQ,
-
-	/*
-	 * Compensation percentage of probe requests when active scan initiated
-	 * during BT voice
-	 *
-	 * Range: 0 - 255 (%)
-	 */
-	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
-
-	/*
-	 * Compensation percentage of WLAN active scan window if initiated
-	 * during BT A2DP
-	 *
-	 * Range: 0 - 1000 (%)
-	 */
-	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
-
-	/*
-	 * Compensation percentage of WLAN passive scan window if initiated
-	 * during BT A2DP BR
-	 *
-	 * Range: 0 - 1000 (%)
-	 */
-	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR,
-
-	/*
-	 * Compensation percentage of WLAN passive scan window if initiated
-	 * during BT A2DP EDR
-	 *
-	 * Range: 0 - 1000 (%)
-	 */
-	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR,
-
-	/*
-	 * Compensation percentage of WLAN passive scan window if initiated
-	 * during BT voice
-	 *
-	 * Range: 0 - 1000 (%)
-	 */
-	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
-
-	/* TODO: explain these values */
-	CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
-	CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN,
-	CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN,
-
-	/*
-	 * Defines whether the SG will force WLAN host to enter/exit PSM
-	 *
-	 * Range: 1 - SG can force, 0 - host handles PSM
-	 */
-	CONF_SG_STA_FORCE_PS_IN_BT_SCO,
-
-	/*
-	 * Defines antenna configuration (single/dual antenna)
-	 *
-	 * Range: 0 - single antenna, 1 - dual antenna
-	 */
-	CONF_SG_ANTENNA_CONFIGURATION,
-
-	/*
-	 * The threshold (percent) of max consecutive beacon misses before
-	 * increasing priority of beacon reception.
-	 *
-	 * Range: 0 - 100 (%)
-	 */
-	CONF_SG_BEACON_MISS_PERCENT,
-
-	/*
-	 * Protection time of the DHCP procedure.
-	 *
-	 * Range: 0 - 100000 (ms)
-	 */
-	CONF_SG_DHCP_TIME,
-
-	/*
-	 * RX guard time before the beginning of a new BT voice frame during
-	 * which no new WLAN trigger frame is transmitted.
-	 *
-	 * Range: 0 - 100000 (us)
-	 */
-	CONF_SG_RXT,
-
-	/*
-	 * TX guard time before the beginning of a new BT voice frame during
-	 * which no new WLAN frame is transmitted.
-	 *
-	 * Range: 0 - 100000 (us)
-	 */
-
-	CONF_SG_TXT,
-
-	/*
-	 * Enable adaptive RXT/TXT algorithm. If disabled, the host values
-	 * will be utilized.
-	 *
-	 * Range: 0 - disable, 1 - enable
-	 */
-	CONF_SG_ADAPTIVE_RXT_TXT,
-
-	/* TODO: explain this value */
-	CONF_SG_GENERAL_USAGE_BIT_MAP,
-
-	/*
-	 * Number of consecutive BT voice frames not interrupted by WLAN
-	 *
-	 * Range: 0 - 100
-	 */
-	CONF_SG_HV3_MAX_SERVED,
-
-	/*
-	 * The used WLAN legacy service period during active BT ACL link
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_PS_POLL_TIMEOUT,
-
-	/*
-	 * The used WLAN UPSD service period during active BT ACL link
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_UPSD_TIMEOUT,
-
-	CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
-	CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
-	CONF_SG_STA_CONNECTION_PROTECTION_TIME,
-
-	/* AP params */
-	CONF_AP_BEACON_MISS_TX,
-	CONF_AP_RX_WINDOW_AFTER_BEACON,
-	CONF_AP_BEACON_WINDOW_INTERVAL,
-	CONF_AP_CONNECTION_PROTECTION_TIME,
-	CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
-	CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,
-
-	/* CTS Diluting params */
-	CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
-	CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,
-
-	CONF_SG_TEMP_PARAM_1,
-	CONF_SG_TEMP_PARAM_2,
-	CONF_SG_TEMP_PARAM_3,
-	CONF_SG_TEMP_PARAM_4,
-	CONF_SG_TEMP_PARAM_5,
-	CONF_SG_TEMP_PARAM_6,
-	CONF_SG_TEMP_PARAM_7,
-	CONF_SG_TEMP_PARAM_8,
-	CONF_SG_TEMP_PARAM_9,
-	CONF_SG_TEMP_PARAM_10,
-
-	CONF_SG_PARAMS_MAX,
-	CONF_SG_PARAMS_ALL = 0xff
-};
+#define WLCORE_CONF_SG_PARAMS_MAX 67
+#define WLCORE_CONF_SG_PARAMS_ALL 0xff
 
 struct conf_sg_settings {
-	u32 params[CONF_SG_PARAMS_MAX];
+	u32 params[WLCORE_CONF_SG_PARAMS_MAX];
 	u8 state;
 } __packed;
 
diff --git a/drivers/net/wireless/ti/wlcore/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c
index be72306..7f672f6 100644
--- a/drivers/net/wireless/ti/wlcore/debugfs.c
+++ b/drivers/net/wireless/ti/wlcore/debugfs.c
@@ -1219,6 +1219,65 @@ static const struct file_operations dev_mem_ops = {
 	.llseek = dev_mem_seek,
 };
 
+static ssize_t fw_logger_read(struct file *file, char __user *user_buf,
+			      size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+
+	return wl1271_format_buffer(user_buf, count,
+					ppos, "%d\n",
+					wl->conf.fwlog.output);
+}
+
+static ssize_t fw_logger_write(struct file *file,
+			       const char __user *user_buf,
+			       size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	unsigned long value;
+	int ret;
+
+	ret = kstrtoul_from_user(user_buf, count, 0, &value);
+	if (ret < 0) {
+		wl1271_warning("illegal value in fw_logger");
+		return -EINVAL;
+	}
+
+	if ((value > 2) || (value == 0)) {
+		wl1271_warning("fw_logger value must be 1-UART 2-SDIO");
+		return -ERANGE;
+	}
+
+	if (wl->conf.fwlog.output == 0) {
+		wl1271_warning("iligal opperation - fw logger disabled by default, please change mode via wlconf");
+		return -EINVAL;
+	}
+
+	mutex_lock(&wl->mutex);
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0) {
+		count = ret;
+		goto out;
+	}
+
+	wl->conf.fwlog.output = value;
+
+	ret = wl12xx_cmd_config_fwlog(wl);
+
+	wl1271_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+	return count;
+}
+
+static const struct file_operations fw_logger_ops = {
+	.open = simple_open,
+	.read = fw_logger_read,
+	.write = fw_logger_write,
+	.llseek = default_llseek,
+};
+
 static int wl1271_debugfs_add_files(struct wl1271 *wl,
 				    struct dentry *rootdir)
 {
@@ -1245,6 +1304,7 @@ static int wl1271_debugfs_add_files(struct wl1271 *wl,
 	DEBUGFS_ADD(irq_timeout, rootdir);
 	DEBUGFS_ADD(fw_stats_raw, rootdir);
 	DEBUGFS_ADD(sleep_auth, rootdir);
+	DEBUGFS_ADD(fw_logger, rootdir);
 
 	streaming = debugfs_create_dir("rx_streaming", rootdir);
 	if (!streaming || IS_ERR(streaming))
diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c
index c42e789..c964054 100644
--- a/drivers/net/wireless/ti/wlcore/event.c
+++ b/drivers/net/wireless/ti/wlcore/event.c
@@ -28,6 +28,88 @@
 #include "ps.h"
 #include "scan.h"
 #include "wl12xx_80211.h"
+#include "hw_ops.h"
+
+#define WL18XX_LOGGER_SDIO_BUFF_MAX	(0x1020)
+#define WL18XX_DATA_RAM_BASE_ADDRESS	(0x20000000)
+#define WL18XX_LOGGER_SDIO_BUFF_ADDR	(0x40159c)
+#define WL18XX_LOGGER_BUFF_OFFSET	(sizeof(struct fw_logger_information))
+#define WL18XX_LOGGER_READ_POINT_OFFSET		(12)
+
+int wlcore_event_fw_logger(struct wl1271 *wl)
+{
+	u32 ret;
+	struct fw_logger_information fw_log;
+	u8  *buffer;
+	u32 internal_fw_addrbase = WL18XX_DATA_RAM_BASE_ADDRESS;
+	u32 addr = WL18XX_LOGGER_SDIO_BUFF_ADDR;
+	u32 end_buff_addr = WL18XX_LOGGER_SDIO_BUFF_ADDR +
+				WL18XX_LOGGER_BUFF_OFFSET;
+	u32 available_len;
+	u32 actual_len;
+	u32 clear_addr;
+	size_t len;
+	u32 start_loc;
+
+	buffer = kzalloc(WL18XX_LOGGER_SDIO_BUFF_MAX, GFP_KERNEL);
+	if (!buffer) {
+		wl1271_error("Fail to allocate fw logger memory");
+		fw_log.actual_buff_size = cpu_to_le32(0);
+		goto out;
+	}
+
+	ret = wlcore_read(wl, addr, buffer, WL18XX_LOGGER_SDIO_BUFF_MAX,
+			  false);
+	if (ret < 0) {
+		wl1271_error("Fail to read logger buffer, error_id = %d",
+			     ret);
+		fw_log.actual_buff_size = cpu_to_le32(0);
+		goto free_out;
+	}
+
+	memcpy(&fw_log, buffer, sizeof(fw_log));
+
+	if (le32_to_cpu(fw_log.actual_buff_size) == 0)
+		goto free_out;
+
+	actual_len = le32_to_cpu(fw_log.actual_buff_size);
+	start_loc = (le32_to_cpu(fw_log.buff_read_ptr) -
+			internal_fw_addrbase) - addr;
+	end_buff_addr += le32_to_cpu(fw_log.max_buff_size);
+	available_len = end_buff_addr -
+			(le32_to_cpu(fw_log.buff_read_ptr) -
+				 internal_fw_addrbase);
+	actual_len = min(actual_len, available_len);
+	len = actual_len;
+
+	wl12xx_copy_fwlog(wl, &buffer[start_loc], len);
+	clear_addr = addr + start_loc + le32_to_cpu(fw_log.actual_buff_size) +
+			internal_fw_addrbase;
+
+	len = le32_to_cpu(fw_log.actual_buff_size) - len;
+	if (len) {
+		wl12xx_copy_fwlog(wl,
+				  &buffer[WL18XX_LOGGER_BUFF_OFFSET],
+				  len);
+		clear_addr = addr + WL18XX_LOGGER_BUFF_OFFSET + len +
+				internal_fw_addrbase;
+	}
+
+	/* double check that clear address and write pointer are the same */
+	if (clear_addr != le32_to_cpu(fw_log.buff_write_ptr)) {
+		wl1271_error("Calculate of clear addr Clear = %x, write = %x",
+			     clear_addr, le32_to_cpu(fw_log.buff_write_ptr));
+	}
+
+	/* indicate FW about Clear buffer */
+	ret = wlcore_write32(wl, addr + WL18XX_LOGGER_READ_POINT_OFFSET,
+			     fw_log.buff_write_ptr);
+free_out:
+	kfree(buffer);
+out:
+	return le32_to_cpu(fw_log.actual_buff_size);
+}
+EXPORT_SYMBOL_GPL(wlcore_event_fw_logger);
 
 void wlcore_event_rssi_trigger(struct wl1271 *wl, s8 *metric_arr)
 {
diff --git a/drivers/net/wireless/ti/wlcore/event.h b/drivers/net/wireless/ti/wlcore/event.h
index acc7a59..75e8e98 100644
--- a/drivers/net/wireless/ti/wlcore/event.h
+++ b/drivers/net/wireless/ti/wlcore/event.h
@@ -64,6 +64,14 @@ enum {
 
 #define NUM_OF_RSSI_SNR_TRIGGERS 8
 
+struct fw_logger_information {
+	__le32 max_buff_size;
+	__le32 actual_buff_size;
+	__le32 num_trace_drop;
+	__le32 buff_read_ptr;
+	__le32 buff_write_ptr;
+} __packed;
+
 struct wl1271;
 
 int wl1271_event_unmask(struct wl1271 *wl);
@@ -84,4 +92,5 @@ void wlcore_event_max_tx_failure(struct wl1271 *wl, unsigned long sta_bitmap);
 void wlcore_event_inactive_sta(struct wl1271 *wl, unsigned long sta_bitmap);
 void wlcore_event_roc_complete(struct wl1271 *wl);
 void wlcore_event_rssi_trigger(struct wl1271 *wl, s8 *metric_arr);
+int  wlcore_event_fw_logger(struct wl1271 *wl);
 #endif
diff --git a/drivers/net/wireless/ti/wlcore/io.c b/drivers/net/wireless/ti/wlcore/io.c
index 68e74ee..9ac118e 100644
--- a/drivers/net/wireless/ti/wlcore/io.c
+++ b/drivers/net/wireless/ti/wlcore/io.c
@@ -175,12 +175,13 @@ int wlcore_set_partition(struct wl1271 *wl,
 	if (ret < 0)
 		goto out;
 
-	/*
-	 * We don't need the size of the last partition, as it is
-	 * automatically calculated based on the total memory size and
-	 * the sizes of the previous partitions.
-	 */
 	ret = wlcore_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
+	if (ret < 0)
+		goto out;
+
+	ret = wlcore_raw_write32(wl, HW_PART3_SIZE_ADDR, p->mem3.size);
+	if (ret < 0)
+		goto out;
 
 out:
 	return ret;
diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 0305729..6c257b5 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -36,8 +36,8 @@
 #define HW_PART1_START_ADDR             (HW_PARTITION_REGISTERS_ADDR + 12)
 #define HW_PART2_SIZE_ADDR              (HW_PARTITION_REGISTERS_ADDR + 16)
 #define HW_PART2_START_ADDR             (HW_PARTITION_REGISTERS_ADDR + 20)
-#define HW_PART3_START_ADDR             (HW_PARTITION_REGISTERS_ADDR + 24)
-
+#define HW_PART3_SIZE_ADDR              (HW_PARTITION_REGISTERS_ADDR + 24)
+#define HW_PART3_START_ADDR             (HW_PARTITION_REGISTERS_ADDR + 28)
 #define HW_ACCESS_REGISTER_SIZE         4
 
 #define HW_ACCESS_PRAM_MAX_RANGE	0x3c000
@@ -207,19 +207,23 @@ static inline int __must_check wlcore_write_reg(struct wl1271 *wl, int reg,
 
 static inline void wl1271_power_off(struct wl1271 *wl)
 {
-	int ret;
+	int ret = 0;
 
 	if (!test_bit(WL1271_FLAG_GPIO_POWER, &wl->flags))
 		return;
 
-	ret = wl->if_ops->power(wl->dev, false);
+	if (wl->if_ops->power)
+		ret = wl->if_ops->power(wl->dev, false);
 	if (!ret)
 		clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
 }
 
 static inline int wl1271_power_on(struct wl1271 *wl)
 {
-	int ret = wl->if_ops->power(wl->dev, true);
+	int ret = 0;
+
+	if (wl->if_ops->power)
+		ret = wl->if_ops->power(wl->dev, true);
 	if (ret == 0)
 		set_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
 
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index ec7f6af..d1109c4 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1,4 +1,3 @@
-
 /*
  * This file is part of wlcore
  *
@@ -303,25 +302,11 @@ out:
 
 static void wlcore_adjust_conf(struct wl1271 *wl)
 {
-	/* Adjust settings according to optional module parameters */
-
-	/* Firmware Logger params */
-	if (fwlog_mem_blocks != -1) {
-		if (fwlog_mem_blocks >= CONF_FWLOG_MIN_MEM_BLOCKS &&
-		    fwlog_mem_blocks <= CONF_FWLOG_MAX_MEM_BLOCKS) {
-			wl->conf.fwlog.mem_blocks = fwlog_mem_blocks;
-		} else {
-			wl1271_error(
-				"Illegal fwlog_mem_blocks=%d using default %d",
-				fwlog_mem_blocks, wl->conf.fwlog.mem_blocks);
-		}
-	}
 
 	if (fwlog_param) {
 		if (!strcmp(fwlog_param, "continuous")) {
 			wl->conf.fwlog.mode = WL12XX_FWLOG_CONTINUOUS;
-		} else if (!strcmp(fwlog_param, "ondemand")) {
-			wl->conf.fwlog.mode = WL12XX_FWLOG_ON_DEMAND;
+			wl->conf.fwlog.output = WL12XX_FWLOG_OUTPUT_HOST;
 		} else if (!strcmp(fwlog_param, "dbgpins")) {
 			wl->conf.fwlog.mode = WL12XX_FWLOG_CONTINUOUS;
 			wl->conf.fwlog.output = WL12XX_FWLOG_OUTPUT_DBG_PINS;
@@ -825,91 +810,32 @@ size_t wl12xx_copy_fwlog(struct wl1271 *wl, u8 *memblock, size_t maxlen)
 
 static void wl12xx_read_fwlog_panic(struct wl1271 *wl)
 {
-	struct wlcore_partition_set part, old_part;
-	u32 addr;
-	u32 offset;
-	u32 end_of_log;
-	u8 *block;
-	int ret;
+	u32 end_of_log = 0;
 
-	if ((wl->quirks & WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED) ||
-	    (wl->conf.fwlog.mem_blocks == 0))
+	if (wl->quirks & WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED)
 		return;
 
 	wl1271_info("Reading FW panic log");
 
-	block = kmalloc(wl->fw_mem_block_size, GFP_KERNEL);
-	if (!block)
-		return;
-
 	/*
 	 * Make sure the chip is awake and the logger isn't active.
 	 * Do not send a stop fwlog command if the fw is hanged or if
 	 * dbgpins are used (due to some fw bug).
 	 */
 	if (wl1271_ps_elp_wakeup(wl))
-		goto out;
+		return;
 	if (!wl->watchdog_recovery &&
 	    wl->conf.fwlog.output != WL12XX_FWLOG_OUTPUT_DBG_PINS)
 		wl12xx_cmd_stop_fwlog(wl);
 
-	/* Read the first memory block address */
-	ret = wlcore_fw_status(wl, wl->fw_status);
-	if (ret < 0)
-		goto out;
-
-	addr = wl->fw_status->log_start_addr;
-	if (!addr)
-		goto out;
-
-	if (wl->conf.fwlog.mode == WL12XX_FWLOG_CONTINUOUS) {
-		offset = sizeof(addr) + sizeof(struct wl1271_rx_descriptor);
-		end_of_log = wl->fwlog_end;
-	} else {
-		offset = sizeof(addr);
-		end_of_log = addr;
-	}
-
-	old_part = wl->curr_part;
-	memset(&part, 0, sizeof(part));
-
 	/* Traverse the memory blocks linked list */
 	do {
-		part.mem.start = wlcore_hw_convert_hwaddr(wl, addr);
-		part.mem.size  = PAGE_SIZE;
-
-		ret = wlcore_set_partition(wl, &part);
-		if (ret < 0) {
-			wl1271_error("%s: set_partition start=0x%X size=%d",
-				__func__, part.mem.start, part.mem.size);
-			goto out;
+		end_of_log = wlcore_event_fw_logger(wl);
+		if (end_of_log == 0) {
+			msleep(100);
+			end_of_log = wlcore_event_fw_logger(wl);
 		}
-
-		memset(block, 0, wl->fw_mem_block_size);
-		ret = wlcore_read_hwaddr(wl, addr, block,
-					wl->fw_mem_block_size, false);
-
-		if (ret < 0)
-			goto out;
-
-		/*
-		 * Memory blocks are linked to one another. The first 4 bytes
-		 * of each memory block hold the hardware address of the next
-		 * one. The last memory block points to the first one in
-		 * on demand mode and is equal to 0x2000000 in continuous mode.
-		 */
-		addr = le32_to_cpup((__le32 *)block);
-
-		if (!wl12xx_copy_fwlog(wl, block + offset,
-					wl->fw_mem_block_size - offset))
-			break;
-	} while (addr && (addr != end_of_log));
-
-	wake_up_interruptible(&wl->fwlog_waitq);
-
-out:
-	kfree(block);
-	wlcore_set_partition(wl, &old_part);
+	} while (end_of_log != 0);
 }
 
 static void wlcore_save_freed_pkts(struct wl1271 *wl, struct wl12xx_vif *wlvif,
@@ -6291,7 +6217,6 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size,
 	wl->active_sta_count = 0;
 	wl->active_link_count = 0;
 	wl->fwlog_size = 0;
-	init_waitqueue_head(&wl->fwlog_waitq);
 
 	/* The system link is always allocated */
 	__set_bit(WL12XX_SYSTEM_HLID, wl->links_map);
@@ -6377,7 +6302,6 @@ int wlcore_free_hw(struct wl1271 *wl)
 	/* Unblock any fwlog readers */
 	mutex_lock(&wl->mutex);
 	wl->fwlog_size = -1;
-	wake_up_interruptible_all(&wl->fwlog_waitq);
 	mutex_unlock(&wl->mutex);
 
 	wlcore_sysfs_free(wl);
@@ -6584,7 +6508,7 @@ MODULE_PARM_DESC(debug_level, "wl12xx debugging level");
 
 module_param_named(fwlog, fwlog_param, charp, 0);
 MODULE_PARM_DESC(fwlog,
-		 "FW logger options: continuous, ondemand, dbgpins or disable");
+		 "FW logger options: continuous, dbgpins or disable");
 
 module_param(fwlog_mem_blocks, int, S_IRUSR | S_IWUSR);
 MODULE_PARM_DESC(fwlog_mem_blocks, "fwlog mem_blocks");
diff --git a/drivers/net/wireless/ti/wlcore/rx.c b/drivers/net/wireless/ti/wlcore/rx.c
index 5b29273..34e7e93 100644
--- a/drivers/net/wireless/ti/wlcore/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -149,7 +149,6 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
 	if (desc->packet_class == WL12XX_RX_CLASS_LOGGER) {
 		size_t len = length - sizeof(*desc);
 		wl12xx_copy_fwlog(wl, data + sizeof(*desc), len);
-		wake_up_interruptible(&wl->fwlog_waitq);
 		return 0;
 	}
 
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index 236b410..44f059f 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -73,7 +73,10 @@
  */
 #define SPI_AGGR_BUFFER_SIZE (4 * PAGE_SIZE)
 
-#define WSPI_MAX_NUM_OF_CHUNKS (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE)
+/* Maximum number of SPI write chunks */
+#define WSPI_MAX_NUM_OF_CHUNKS \
+	((SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) + 1)
+
 
 struct wl12xx_spi_glue {
 	struct device *dev;
@@ -268,9 +271,10 @@ static int __must_check wl12xx_spi_raw_write(struct device *child, int addr,
 					     void *buf, size_t len, bool fixed)
 {
 	struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
-	struct spi_transfer t[2 * (WSPI_MAX_NUM_OF_CHUNKS + 1)];
+	/* SPI write buffers - 2 for each chunk */
+	struct spi_transfer t[2 * WSPI_MAX_NUM_OF_CHUNKS];
 	struct spi_message m;
-	u32 commands[WSPI_MAX_NUM_OF_CHUNKS];
+	u32 commands[WSPI_MAX_NUM_OF_CHUNKS]; /* 1 command per chunk */
 	u32 *cmd;
 	u32 chunk_len;
 	int i;
diff --git a/drivers/net/wireless/ti/wlcore/sysfs.c b/drivers/net/wireless/ti/wlcore/sysfs.c
index 24dd288..a9218e5 100644
--- a/drivers/net/wireless/ti/wlcore/sysfs.c
+++ b/drivers/net/wireless/ti/wlcore/sysfs.c
@@ -119,32 +119,6 @@ static ssize_t wl1271_sysfs_read_fwlog(struct file *filp, struct kobject *kobj,
 	if (ret < 0)
 		return -ERESTARTSYS;
 
-	/* Let only one thread read the log at a time, blocking others */
-	while (wl->fwlog_size == 0) {
-		DEFINE_WAIT(wait);
-
-		prepare_to_wait_exclusive(&wl->fwlog_waitq,
-					  &wait,
-					  TASK_INTERRUPTIBLE);
-
-		if (wl->fwlog_size != 0) {
-			finish_wait(&wl->fwlog_waitq, &wait);
-			break;
-		}
-
-		mutex_unlock(&wl->mutex);
-
-		schedule();
-		finish_wait(&wl->fwlog_waitq, &wait);
-
-		if (signal_pending(current))
-			return -ERESTARTSYS;
-
-		ret = mutex_lock_interruptible(&wl->mutex);
-		if (ret < 0)
-			return -ERESTARTSYS;
-	}
-
 	/* Check if the fwlog is still valid */
 	if (wl->fwlog_size < 0) {
 		mutex_unlock(&wl->mutex);
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 906be6a..dda01b1 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -310,9 +310,6 @@ struct wl1271 {
 	/* FW memory block size */
 	u32 fw_mem_block_size;
 
-	/* Sysfs FW log entry readers wait queue */
-	wait_queue_head_t fwlog_waitq;
-
 	/* Hardware recovery work */
 	struct work_struct recovery_work;
 	bool watchdog_recovery;