diff options
author | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-06-25 11:19:17 (GMT) |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-08-13 07:44:19 (GMT) |
commit | f860b0522f65d3a0f8e6a4d908933737e1a82817 (patch) | |
tree | 8002a666789db1196fd85df663d0fc4d8e852723 /drivers/net | |
parent | 531c4f896ca380812c22841e8ae396428a3327bf (diff) | |
download | linux-f860b0522f65d3a0f8e6a4d908933737e1a82817.tar.xz |
drivers/net: Kconfig and Makefile cleanup
After the move of the Ethernet drivers into drivers/net/ethernet/
there was some leftover cleanup to do in the Kconfig and Makefile.
Removed the 10/100, 1000, and 10GbE Kconfig menus.
Removed the out-dated pci-skeleton.c file which was used an
example driver. With the current networking features and
structure, the file is no longer a good example to use for
driver creation.
CC: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/Kconfig | 116 | ||||
-rw-r--r-- | drivers/net/Makefile | 4 | ||||
-rw-r--r-- | drivers/net/ethernet/Kconfig | 6 | ||||
-rw-r--r-- | drivers/net/pci-skeleton.c | 1923 |
4 files changed, 6 insertions, 2043 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 3a1fd2c..31d8792 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -192,122 +192,6 @@ source "drivers/net/phy/Kconfig" source "drivers/net/ethernet/Kconfig" -menuconfig NET_ETHERNET - bool "Ethernet (10 or 100Mbit)" - depends on !UML - ---help--- - Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common - type of Local Area Network (LAN) in universities and companies. - - Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over - coaxial cable, linking computers in a chain), 10BASE-T or twisted - pair (10 Mbps over twisted pair cable, linking computers to central - hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs), - 100BASE-TX (100 Mbps over two twisted pair cables, using hubs), - 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair - cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links) - [the 100BASE varieties are also known as Fast Ethernet], and Gigabit - Ethernet (1 Gbps over optical fiber or short copper links). - - If your Linux machine will be connected to an Ethernet and you have - an Ethernet network interface card (NIC) installed in your computer, - say Y here and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. You will then also have - to say Y to the driver for your particular NIC. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about Ethernet network cards. If unsure, say N. - -if NET_ETHERNET - -config NET_PCI - bool "EISA, VLB, PCI and on board controllers" - depends on ISA || EISA || PCI - help - This is another class of network cards which attach directly to the - bus. If you have one of those, say Y and read the Ethernet-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. - - Note that the answer to this question doesn't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about this class of network cards. If you say Y, you - will be asked for your specific card in the following questions. If - you are unsure, say Y. - -config NET_POCKET - bool "Pocket and portable adapters" - depends on PARPORT - ---help--- - Cute little network (Ethernet) devices which attach to the parallel - port ("pocket adapters"), commonly used with laptops. If you have - one of those, say Y and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - If you want to plug a network (or some other) card into the PCMCIA - (or PC-card) slot of your laptop instead (PCMCIA is the standard for - credit card size extension cards used by all modern laptops), you - need the pcmcia-cs package (location contained in the file - <file:Documentation/Changes>) and you can say N here. - - Laptop users should read the Linux Laptop home page at - <http://www.linux-on-laptops.com/> or - Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>. - - Note that the answer to this question doesn't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about this class of network devices. If you say Y, you - will be asked for your specific device in the following questions. - -endif # NET_ETHERNET - -# -# Gigabit Ethernet -# - -menuconfig NETDEV_1000 - bool "Ethernet (1000 Mbit)" - depends on !UML - default y - ---help--- - Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common - type of Local Area Network (LAN) in universities and companies. - - Say Y here to get to see options for Gigabit Ethernet drivers. - This option alone does not add any kernel code. - Note that drivers supporting both 100 and 1000 MBit may be listed - under "Ethernet (10 or 100MBit)" instead. - - If you say N, all options in this submenu will be skipped and disabled. - -if NETDEV_1000 - -endif # NETDEV_1000 - -# -# 10 Gigabit Ethernet -# - -menuconfig NETDEV_10000 - bool "Ethernet (10000 Mbit)" - depends on !UML - default y - ---help--- - Say Y here to get to see options for 10 Gigabit Ethernet drivers. - This option alone does not add any kernel code. - - If you say N, all options in this submenu will be skipped and disabled. - -if NETDEV_10000 - -config MDIO - tristate - -config SUNGEM_PHY - tristate - -endif # NETDEV_10000 - source "drivers/net/tokenring/Kconfig" source "drivers/net/wireless/Kconfig" diff --git a/drivers/net/Makefile b/drivers/net/Makefile index fcc62e6..9cb47bb 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -13,9 +13,7 @@ obj-$(CONFIG_VMXNET3) += vmxnet3/ # link order important here # obj-$(CONFIG_PLIP) += plip.o - obj-$(CONFIG_ROADRUNNER) += rrunner.o - obj-$(CONFIG_SKFP) += skfp/ obj-$(CONFIG_RIONET) += rionet.o @@ -25,7 +23,6 @@ obj-$(CONFIG_RIONET) += rionet.o obj-$(CONFIG_NET) += Space.o loopback.o obj-$(CONFIG_NET_SB1000) += sb1000.o - obj-$(CONFIG_PPP) += ppp_generic.o obj-$(CONFIG_PPP_ASYNC) += ppp_async.o obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o @@ -35,7 +32,6 @@ obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o obj-$(CONFIG_PPPOE) += pppox.o pppoe.o obj-$(CONFIG_PPPOL2TP) += pppox.o obj-$(CONFIG_PPTP) += pppox.o pptp.o - obj-$(CONFIG_SLIP) += slip.o obj-$(CONFIG_SLHC) += slhc.o diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 1f5a32d..1f64747 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -11,6 +11,12 @@ menuconfig ETHERNET if ETHERNET +config MDIO + tristate + +config SUNGEM_PHY + tristate + source "drivers/net/ethernet/3com/Kconfig" source "drivers/net/ethernet/adaptec/Kconfig" source "drivers/net/ethernet/aeroflex/Kconfig" diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c deleted file mode 100644 index c0f2337..0000000 --- a/drivers/net/pci-skeleton.c +++ /dev/null @@ -1,1923 +0,0 @@ -/* - - drivers/net/pci-skeleton.c - - Maintained by Jeff Garzik <jgarzik@pobox.com> - - Original code came from 8139too.c, which in turns was based - originally on Donald Becker's rtl8139.c driver, versions 1.11 - and older. This driver was originally based on rtl8139.c - version 1.07. Header of rtl8139.c version 1.11: - - -----<snip>----- - - Written 1997-2000 by Donald Becker. - This software may be used and distributed according to the - terms of the GNU General Public License (GPL), incorporated - herein by reference. Drivers based on or derived from this - code fall under the GPL and must retain the authorship, - copyright and license notice. This file is not a complete - program and may only be used when the entire operating - system is licensed under the GPL. - - This driver is for boards based on the RTL8129 and RTL8139 - PCI ethernet chips. - - The author may be reached as becker@scyld.com, or C/O Scyld - Computing Corporation 410 Severn Ave., Suite 210 Annapolis - MD 21403 - - Support and updates available at - http://www.scyld.com/network/rtl8139.html - - Twister-tuning table provided by Kinston - <shangh@realtek.com.tw>. - - -----<snip>----- - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - ------------------------------------------------------------------------------ - - Theory of Operation - -I. Board Compatibility - -This device driver is designed for the RealTek RTL8139 series, the RealTek -Fast Ethernet controllers for PCI and CardBus. This chip is used on many -low-end boards, sometimes with its markings changed. - - -II. Board-specific settings - -PCI bus devices are configured by the system at boot time, so no jumpers -need to be set on the board. The system BIOS will assign the -PCI INTA signal to a (preferably otherwise unused) system IRQ line. - -III. Driver operation - -IIIa. Rx Ring buffers - -The receive unit uses a single linear ring buffer rather than the more -common (and more efficient) descriptor-based architecture. Incoming frames -are sequentially stored into the Rx region, and the host copies them into -skbuffs. - -Comment: While it is theoretically possible to process many frames in place, -any delay in Rx processing would cause us to drop frames. More importantly, -the Linux protocol stack is not designed to operate in this manner. - -IIIb. Tx operation - -The RTL8139 uses a fixed set of four Tx descriptors in register space. -In a stunningly bad design choice, Tx frames must be 32 bit aligned. Linux -aligns the IP header on word boundaries, and 14 byte ethernet header means -that almost all frames will need to be copied to an alignment buffer. - -IVb. References - -http://www.realtek.com.tw/ -http://www.scyld.com/expert/NWay.html - -IVc. Errata - -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/delay.h> -#include <linux/ethtool.h> -#include <linux/mii.h> -#include <linux/crc32.h> -#include <linux/io.h> - -#define NETDRV_VERSION "1.0.1" -#define MODNAME "netdrv" -#define NETDRV_DRIVER_LOAD_MSG "MyVendor Fast Ethernet driver " NETDRV_VERSION " loaded" - -static char version[] __devinitdata = - KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n" - " Support available from http://foo.com/bar/baz.html\n"; - -/* define to 1 to enable PIO instead of MMIO */ -#undef USE_IO_OPS - -/* define to 1 to enable copious debugging info */ -#undef NETDRV_DEBUG - -/* define to 1 to disable lightweight runtime debugging checks */ -#undef NETDRV_NDEBUG - - -#ifdef NETDRV_DEBUG -/* note: prints function name for you */ -#define DPRINTK(fmt, args...) \ - printk(KERN_DEBUG "%s: " fmt, __func__ , ## args) -#else -#define DPRINTK(fmt, args...) \ -do { \ - if (0) \ - printk(KERN_DEBUG fmt, ##args); \ -} while (0) -#endif - -#ifdef NETDRV_NDEBUG -#define assert(expr) do {} while (0) -#else -#define assert(expr) \ - if (!(expr)) { \ - printk("Assertion failed! %s,%s,%s,line=%d\n", \ - #expr, __FILE__, __func__, __LINE__); \ - } -#endif - - -/* A few user-configurable values. */ -/* media options */ -static int media[] = {-1, -1, -1, -1, -1, -1, -1, -1}; - -/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ -static int max_interrupt_work = 20; - -/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). - The RTL chips use a 64 element hash table based on the Ethernet CRC. */ -static int multicast_filter_limit = 32; - -/* Size of the in-memory receive ring. */ -#define RX_BUF_LEN_IDX 2 /* 0==8K, 1==16K, 2==32K, 3==64K */ -#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX) -#define RX_BUF_PAD 16 -#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */ -#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD) - -/* Number of Tx descriptor registers. */ -#define NUM_TX_DESC 4 - -/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/ -#define MAX_ETH_FRAME_SIZE 1536 - -/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */ -#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE -#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC) - -/* PCI Tuning Parameters - Threshold is bytes transferred to chip before transmission starts. */ -#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */ - -/* The following settings are log_2(bytes)-4: - 0==16 bytes 1==32 2==64 3==128 4==256 5==512 6==1024 7==end of packet. -*/ -#define RX_FIFO_THRESH 6 /* Rx buffer level before first PCI xfer. */ -#define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ -#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ - - -/* Operational parameters that usually are not changed. */ -/* Time in jiffies before concluding the transmitter is hung. */ -#define TX_TIMEOUT (6 * HZ) - -enum { - HAS_CHIP_XCVR = 0x020000, - HAS_LNK_CHNG = 0x040000, -}; - -#define NETDRV_MIN_IO_SIZE 0x80 -#define RTL8139B_IO_SIZE 256 - -#define NETDRV_CAPS (HAS_CHIP_XCVR | HAS_LNK_CHNG) - -typedef enum { - RTL8139 = 0, - NETDRV_CB, - SMC1211TX, - /*MPX5030,*/ - DELTA8139, - ADDTRON8139, -} board_t; - - -/* indexed by board_t, above */ -static struct { - const char *name; -} board_info[] __devinitdata = { - { "RealTek RTL8139 Fast Ethernet" }, - { "RealTek RTL8139B PCI/CardBus" }, - { "SMC1211TX EZCard 10/100 (RealTek RTL8139)" }, -/* { MPX5030, "Accton MPX5030 (RealTek RTL8139)" },*/ - { "Delta Electronics 8139 10/100BaseTX" }, - { "Addtron Technology 8139 10/100BaseTX" }, -}; - - -static DEFINE_PCI_DEVICE_TABLE(netdrv_pci_tbl) = { - {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, - {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, NETDRV_CB }, - {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMC1211TX }, -/* {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MPX5030 },*/ - {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DELTA8139 }, - {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ADDTRON8139 }, - {0,} -}; -MODULE_DEVICE_TABLE(pci, netdrv_pci_tbl); - - -/* The rest of these values should never change. */ - -/* Symbolic offsets to registers. */ -enum NETDRV_registers { - MAC0 = 0, /* Ethernet hardware address. */ - MAR0 = 8, /* Multicast filter. */ - TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */ - TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */ - RxBuf = 0x30, - RxEarlyCnt = 0x34, - RxEarlyStatus = 0x36, - ChipCmd = 0x37, - RxBufPtr = 0x38, - RxBufAddr = 0x3A, - IntrMask = 0x3C, - IntrStatus = 0x3E, - TxConfig = 0x40, - ChipVersion = 0x43, - RxConfig = 0x44, - Timer = 0x48, /* A general-purpose counter. */ - RxMissed = 0x4C, /* 24 bits valid, write clears. */ - Cfg9346 = 0x50, - Config0 = 0x51, - Config1 = 0x52, - FlashReg = 0x54, - MediaStatus = 0x58, - Config3 = 0x59, - Config4 = 0x5A, /* absent on RTL-8139A */ - HltClk = 0x5B, - MultiIntr = 0x5C, - TxSummary = 0x60, - BasicModeCtrl = 0x62, - BasicModeStatus = 0x64, - NWayAdvert = 0x66, - NWayLPAR = 0x68, - NWayExpansion = 0x6A, - /* Undocumented registers, but required for proper operation. */ - FIFOTMS = 0x70, /* FIFO Control and test. */ - CSCR = 0x74, /* Chip Status and Configuration Register. */ - PARA78 = 0x78, - PARA7c = 0x7c, /* Magic transceiver parameter register. */ - Config5 = 0xD8, /* absent on RTL-8139A */ -}; - -enum ClearBitMasks { - MultiIntrClear = 0xF000, - ChipCmdClear = 0xE2, - Config1Clear = (1 << 7) | (1 << 6) | (1 << 3) | (1 << 2) | (1 << 1), -}; - -enum ChipCmdBits { - CmdReset = 0x10, - CmdRxEnb = 0x08, - CmdTxEnb = 0x04, - RxBufEmpty = 0x01, -}; - -/* Interrupt register bits, using my own meaningful names. */ -enum IntrStatusBits { - PCIErr = 0x8000, - PCSTimeout = 0x4000, - RxFIFOOver = 0x40, - RxUnderrun = 0x20, - RxOverflow = 0x10, - TxErr = 0x08, - TxOK = 0x04, - RxErr = 0x02, - RxOK = 0x01, -}; -enum TxStatusBits { - TxHostOwns = 0x2000, - TxUnderrun = 0x4000, - TxStatOK = 0x8000, - TxOutOfWindow = 0x20000000, - TxAborted = 0x40000000, - TxCarrierLost = 0x80000000, -}; -enum RxStatusBits { - RxMulticast = 0x8000, - RxPhysical = 0x4000, - RxBroadcast = 0x2000, - RxBadSymbol = 0x0020, - RxRunt = 0x0010, - RxTooLong = 0x0008, - RxCRCErr = 0x0004, - RxBadAlign = 0x0002, - RxStatusOK = 0x0001, -}; - -/* Bits in RxConfig. */ -enum rx_mode_bits { - AcceptErr = 0x20, - AcceptRunt = 0x10, - AcceptBroadcast = 0x08, - AcceptMulticast = 0x04, - AcceptMyPhys = 0x02, - AcceptAllPhys = 0x01, -}; - -/* Bits in TxConfig. */ -enum tx_config_bits { - TxIFG1 = (1 << 25), /* Interframe Gap Time */ - TxIFG0 = (1 << 24), /* Enabling these bits violates IEEE 802.3 */ - TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */ - TxCRC = (1 << 16), /* DISABLE appending CRC to end of Tx packets */ - TxClearAbt = (1 << 0), /* Clear abort (WO) */ - TxDMAShift = 8, /* DMA burst value(0-7) is shift this many bits */ - - TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */ -}; - -/* Bits in Config1 */ -enum Config1Bits { - Cfg1_PM_Enable = 0x01, - Cfg1_VPD_Enable = 0x02, - Cfg1_PIO = 0x04, - Cfg1_MMIO = 0x08, - Cfg1_LWAKE = 0x10, - Cfg1_Driver_Load = 0x20, - Cfg1_LED0 = 0x40, - Cfg1_LED1 = 0x80, -}; - -enum RxConfigBits { - /* Early Rx threshold, none or X/16 */ - RxCfgEarlyRxNone = 0, - RxCfgEarlyRxShift = 24, - - /* rx fifo threshold */ - RxCfgFIFOShift = 13, - RxCfgFIFONone = (7 << RxCfgFIFOShift), - - /* Max DMA burst */ - RxCfgDMAShift = 8, - RxCfgDMAUnlimited = (7 << RxCfgDMAShift), - - /* rx ring buffer length */ - RxCfgRcv8K = 0, - RxCfgRcv16K = (1 << 11), - RxCfgRcv32K = (1 << 12), - RxCfgRcv64K = (1 << 11) | (1 << 12), - - /* Disable packet wrap at end of Rx buffer */ - RxNoWrap = (1 << 7), -}; - - -/* Twister tuning parameters from RealTek. - Completely undocumented, but required to tune bad links. */ -enum CSCRBits { - CSCR_LinkOKBit = 0x0400, - CSCR_LinkChangeBit = 0x0800, - CSCR_LinkStatusBits = 0x0f000, - CSCR_LinkDownOffCmd = 0x003c0, - CSCR_LinkDownCmd = 0x0f3c0, -}; - - -enum Cfg9346Bits { - Cfg9346_Lock = 0x00, - Cfg9346_Unlock = 0xC0, -}; - - -#define PARA78_default 0x78fa8388 -#define PARA7c_default 0xcb38de43 /* param[0][3] */ -#define PARA7c_xxx 0xcb38de43 -static const unsigned long param[4][4] = { - {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43}, - {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83}, - {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83}, - {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83} -}; - -struct ring_info { - struct sk_buff *skb; - dma_addr_t mapping; -}; - - -typedef enum { - CH_8139 = 0, - CH_8139_K, - CH_8139A, - CH_8139B, - CH_8130, - CH_8139C, -} chip_t; - - -/* directly indexed by chip_t, above */ -static const struct { - const char *name; - u8 version; /* from RTL8139C docs */ - u32 RxConfigMask; /* should clear the bits supported by this chip */ -} rtl_chip_info[] = { - { "RTL-8139", - 0x40, - 0xf0fe0040, /* XXX copied from RTL8139A, verify */ - }, - - { "RTL-8139 rev K", - 0x60, - 0xf0fe0040, - }, - - { "RTL-8139A", - 0x70, - 0xf0fe0040, - }, - - { "RTL-8139B", - 0x78, - 0xf0fc0040 - }, - - { "RTL-8130", - 0x7C, - 0xf0fe0040, /* XXX copied from RTL8139A, verify */ - }, - - { "RTL-8139C", - 0x74, - 0xf0fc0040, /* XXX copied from RTL8139B, verify */ - }, - -}; - - -struct netdrv_private { - board_t board; - void *mmio_addr; - int drv_flags; - struct pci_dev *pci_dev; - struct timer_list timer; /* Media selection timer. */ - unsigned char *rx_ring; - unsigned int cur_rx; /* Index into the Rx buffer of next Rx pkt. */ - unsigned int tx_flag; - atomic_t cur_tx; - atomic_t dirty_tx; - /* The saved address of a sent-in-place packet/buffer, for skfree(). */ - struct ring_info tx_info[NUM_TX_DESC]; - unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */ - unsigned char *tx_bufs; /* Tx bounce buffer region. */ - dma_addr_t rx_ring_dma; - dma_addr_t tx_bufs_dma; - char phys[4]; /* MII device addresses. */ - char twistie, twist_row, twist_col; /* Twister tune state. */ - unsigned int full_duplex:1; /* Full-duplex operation requested. */ - unsigned int duplex_lock:1; - unsigned int default_port:4; /* Last dev->if_port value. */ - unsigned int media2:4; /* Secondary monitored media port. */ - unsigned int medialock:1; /* Don't sense media type. */ - unsigned int mediasense:1; /* Media sensing in progress. */ - spinlock_t lock; - chip_t chipset; -}; - -MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>"); -MODULE_DESCRIPTION("Skeleton for a PCI Fast Ethernet driver"); -MODULE_LICENSE("GPL"); -module_param(multicast_filter_limit, int, 0); -module_param(max_interrupt_work, int, 0); -module_param_array(media, int, NULL, 0); -MODULE_PARM_DESC(multicast_filter_limit, - MODNAME " maximum number of filtered multicast addresses"); -MODULE_PARM_DESC(max_interrupt_work, - MODNAME " maximum events handled per interrupt"); -MODULE_PARM_DESC(media, - MODNAME " Bits 0-3: media type, bit 17: full duplex"); - -static int read_eeprom(void *ioaddr, int location, int addr_len); -static int netdrv_open(struct net_device *dev); -static int mdio_read(struct net_device *dev, int phy_id, int location); -static void mdio_write(struct net_device *dev, int phy_id, int location, - int val); -static void netdrv_timer(unsigned long data); -static void netdrv_tx_timeout(struct net_device *dev); -static void netdrv_init_ring(struct net_device *dev); -static int netdrv_start_xmit(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t netdrv_interrupt(int irq, void *dev_instance); -static int netdrv_close(struct net_device *dev); -static int netdrv_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static void netdrv_set_rx_mode(struct net_device *dev); -static void netdrv_hw_start(struct net_device *dev); - - -#ifdef USE_IO_OPS - -#define NETDRV_R8(reg) inb(((unsigned long)ioaddr) + (reg)) -#define NETDRV_R16(reg) inw(((unsigned long)ioaddr) + (reg)) -#define NETDRV_R32(reg) ((unsigned long)inl(((unsigned long)ioaddr) + (reg))) -#define NETDRV_W8(reg, val8) outb((val8), ((unsigned long)ioaddr) + (reg)) -#define NETDRV_W16(reg, val16) outw((val16), ((unsigned long)ioaddr) + (reg)) -#define NETDRV_W32(reg, val32) outl((val32), ((unsigned long)ioaddr) + (reg)) -#define NETDRV_W8_F NETDRV_W8 -#define NETDRV_W16_F NETDRV_W16 -#define NETDRV_W32_F NETDRV_W32 -#undef readb -#undef readw -#undef readl -#undef writeb -#undef writew -#undef writel -#define readb(addr) inb((unsigned long)(addr)) -#define readw(addr) inw((unsigned long)(addr)) -#define readl(addr) inl((unsigned long)(addr)) -#define writeb(val, addr) outb((val), (unsigned long)(addr)) -#define writew(val, addr) outw((val), (unsigned long)(addr)) -#define writel(val, addr) outl((val), (unsigned long)(addr)) - -#else - -/* write MMIO register, with flush */ -/* Flush avoids rtl8139 bug w/ posted MMIO writes */ -#define NETDRV_W8_F(reg, val8) \ -do { \ - writeb((val8), ioaddr + (reg)); \ - readb(ioaddr + (reg)); \ -} while (0) -#define NETDRV_W16_F(reg, val16) \ -do { \ - writew((val16), ioaddr + (reg)); \ - readw(ioaddr + (reg)); \ -} while (0) -#define NETDRV_W32_F(reg, val32) \ -do { \ - writel((val32), ioaddr + (reg)); \ - readl(ioaddr + (reg)); \ -} while (0) - - -#ifdef MMIO_FLUSH_AUDIT_COMPLETE - -/* write MMIO register */ -#define NETDRV_W8(reg, val8) writeb((val8), ioaddr + (reg)) -#define NETDRV_W16(reg, val16) writew((val16), ioaddr + (reg)) -#define NETDRV_W32(reg, val32) writel((val32), ioaddr + (reg)) - -#else - -/* write MMIO register, then flush */ -#define NETDRV_W8 NETDRV_W8_F -#define NETDRV_W16 NETDRV_W16_F -#define NETDRV_W32 NETDRV_W32_F - -#endif /* MMIO_FLUSH_AUDIT_COMPLETE */ - -/* read MMIO register */ -#define NETDRV_R8(reg) readb(ioaddr + (reg)) -#define NETDRV_R16(reg) readw(ioaddr + (reg)) -#define NETDRV_R32(reg) ((unsigned long) readl(ioaddr + (reg))) - -#endif /* USE_IO_OPS */ - - -static const u16 netdrv_intr_mask = - PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver | - TxErr | TxOK | RxErr | RxOK; - -static const unsigned int netdrv_rx_config = - RxCfgEarlyRxNone | RxCfgRcv32K | RxNoWrap | - (RX_FIFO_THRESH << RxCfgFIFOShift) | - (RX_DMA_BURST << RxCfgDMAShift); - - -static int __devinit netdrv_init_board(struct pci_dev *pdev, - struct net_device **dev_out, - void **ioaddr_out) -{ - void *ioaddr = NULL; - struct net_device *dev; - struct netdrv_private *tp; - int rc, i; - u32 pio_start, pio_end, pio_flags, pio_len; - unsigned long mmio_start, mmio_end, mmio_flags, mmio_len; - u32 tmp; - - DPRINTK("ENTER\n"); - - assert(pdev != NULL); - assert(ioaddr_out != NULL); - - *ioaddr_out = NULL; - *dev_out = NULL; - - /* dev zeroed in alloc_etherdev */ - dev = alloc_etherdev(sizeof(*tp)); - if (dev == NULL) { - dev_err(&pdev->dev, "unable to alloc new ethernet\n"); - DPRINTK("EXIT, returning -ENOMEM\n"); - return -ENOMEM; - } - SET_NETDEV_DEV(dev, &pdev->dev); - tp = netdev_priv(dev); - - /* enable device(incl. PCI PM wakeup), and bus-mastering */ - rc = pci_enable_device(pdev); - if (rc) - goto err_out; - - pio_start = pci_resource_start(pdev, 0); - pio_end = pci_resource_end(pdev, 0); - pio_flags = pci_resource_flags(pdev, 0); - pio_len = pci_resource_len(pdev, 0); - - mmio_start = pci_resource_start(pdev, 1); - mmio_end = pci_resource_end(pdev, 1); - mmio_flags = pci_resource_flags(pdev, 1); - mmio_len = pci_resource_len(pdev, 1); - - /* set this immediately, we need to know before - * we talk to the chip directly */ - DPRINTK("PIO region size == %#02X\n", pio_len); - DPRINTK("MMIO region size == %#02lX\n", mmio_len); - - /* make sure PCI base addr 0 is PIO */ - if (!(pio_flags & IORESOURCE_IO)) { - dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n"); - rc = -ENODEV; - goto err_out; - } - - /* make sure PCI base addr 1 is MMIO */ - if (!(mmio_flags & IORESOURCE_MEM)) { - dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n"); - rc = -ENODEV; - goto err_out; - } - - /* check for weird/broken PCI region reporting */ - if ((pio_len < NETDRV_MIN_IO_SIZE) || - (mmio_len < NETDRV_MIN_IO_SIZE)) { - dev_err(&pdev->dev, "Invalid PCI region size(s), aborting\n"); - rc = -ENODEV; - goto err_out; - } - - rc = pci_request_regions(pdev, MODNAME); - if (rc) - goto err_out; - - pci_set_master(pdev); - -#ifdef USE_IO_OPS - ioaddr = (void *)pio_start; -#else - /* ioremap MMIO region */ - ioaddr = ioremap(mmio_start, mmio_len); - if (ioaddr == NULL) { - dev_err(&pdev->dev, "cannot remap MMIO, aborting\n"); - rc = -EIO; - goto err_out_free_res; - } -#endif /* USE_IO_OPS */ - - /* Soft reset the chip. */ - NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | CmdReset); - - /* Check that the chip has finished the reset. */ - for (i = 1000; i > 0; i--) - if ((NETDRV_R8(ChipCmd) & CmdReset) == 0) - break; - else - udelay(10); - - /* Bring the chip out of low-power mode. */ - /* <insert device-specific code here> */ - -#ifndef USE_IO_OPS - /* sanity checks -- ensure PIO and MMIO registers agree */ - assert(inb(pio_start+Config0) == readb(ioaddr+Config0)); - assert(inb(pio_start+Config1) == readb(ioaddr+Config1)); - assert(inb(pio_start+TxConfig) == readb(ioaddr+TxConfig)); - assert(inb(pio_start+RxConfig) == readb(ioaddr+RxConfig)); -#endif /* !USE_IO_OPS */ - - /* identify chip attached to board */ - tmp = NETDRV_R8(ChipVersion); - for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--) - if (tmp == rtl_chip_info[i].version) { - tp->chipset = i; - goto match; - } - - /* if unknown chip, assume array element #0, original RTL-8139 in this case */ - dev_printk(KERN_DEBUG, &pdev->dev, - "unknown chip version, assuming RTL-8139\n"); - dev_printk(KERN_DEBUG, &pdev->dev, "TxConfig = %#lx\n", - NETDRV_R32(TxConfig)); - tp->chipset = 0; - -match: - DPRINTK("chipset id(%d) == index %d, '%s'\n", - tmp, tp->chipset, rtl_chip_info[tp->chipset].name); - - rc = register_netdev(dev); - if (rc) - goto err_out_unmap; - - DPRINTK("EXIT, returning 0\n"); - *ioaddr_out = ioaddr; - *dev_out = dev; - return 0; - -err_out_unmap: -#ifndef USE_IO_OPS - iounmap(ioaddr); -err_out_free_res: -#endif - pci_release_regions(pdev); -err_out: - free_netdev(dev); - DPRINTK("EXIT, returning %d\n", rc); - return rc; -} - -static const struct net_device_ops netdrv_netdev_ops = { - .ndo_open = netdrv_open, - .ndo_stop = netdrv_close, - .ndo_start_xmit = netdrv_start_xmit, - .ndo_set_multicast_list = netdrv_set_rx_mode, - .ndo_do_ioctl = netdrv_ioctl, - .ndo_tx_timeout = netdrv_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, -}; - -static int __devinit netdrv_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *dev = NULL; - struct netdrv_private *tp; - int i, addr_len, option; - void *ioaddr = NULL; - static int board_idx = -1; - -/* when built into the kernel, we only print version if device is found */ -#ifndef MODULE - static int printed_version; - if (!printed_version++) - printk(version); -#endif - - DPRINTK("ENTER\n"); - - assert(pdev != NULL); - assert(ent != NULL); - - board_idx++; - - i = netdrv_init_board(pdev, &dev, &ioaddr); - if (i < 0) { - DPRINTK("EXIT, returning %d\n", i); - return i; - } - - tp = netdev_priv(dev); - - assert(ioaddr != NULL); - assert(dev != NULL); - assert(tp != NULL); - - addr_len = read_eeprom(ioaddr, 0, 8) == 0x8129 ? 8 : 6; - for (i = 0; i < 3; i++) - ((u16 *)(dev->dev_addr))[i] = - le16_to_cpu(read_eeprom(ioaddr, i + 7, addr_len)); - - dev->netdev_ops = &netdrv_netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - - dev->irq = pdev->irq; - dev->base_addr = (unsigned long) ioaddr; - - /* netdev_priv()/tp zeroed and aligned in alloc_etherdev */ - tp = netdev_priv(dev); - - /* note: tp->chipset set in netdrv_init_board */ - tp->drv_flags = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER | NETDRV_CAPS; - tp->pci_dev = pdev; - tp->board = ent->driver_data; - tp->mmio_addr = ioaddr; - spin_lock_init(&tp->lock); - - pci_set_drvdata(pdev, dev); - - tp->phys[0] = 32; - - netdev_info(dev, "%s at %#lx, %pM IRQ %d\n", - board_info[ent->driver_data].name, - dev->base_addr, dev->dev_addr, dev->irq); - - netdev_printk(KERN_DEBUG, dev, "Identified 8139 chip type '%s'\n", - rtl_chip_info[tp->chipset].name); - - /* Put the chip into low-power mode. */ - NETDRV_W8_F(Cfg9346, Cfg9346_Unlock); - - /* The lower four bits are the media type. */ - option = (board_idx > 7) ? 0 : media[board_idx]; - if (option > 0) { - tp->full_duplex = (option & 0x200) ? 1 : 0; - tp->default_port = option & 15; - if (tp->default_port) - tp->medialock = 1; - } - - if (tp->full_duplex) { - netdev_info(dev, "Media type forced to Full Duplex\n"); - mdio_write(dev, tp->phys[0], MII_ADVERTISE, ADVERTISE_FULL); - tp->duplex_lock = 1; - } - - DPRINTK("EXIT - returning 0\n"); - return 0; -} - - -static void __devexit netdrv_remove_one(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct netdrv_private *np; - - DPRINTK("ENTER\n"); - - assert(dev != NULL); - - np = netdev_priv(dev); - assert(np != NULL); - - unregister_netdev(dev); - -#ifndef USE_IO_OPS - iounmap(np->mmio_addr); -#endif /* !USE_IO_OPS */ - - pci_release_regions(pdev); - - free_netdev(dev); - - pci_set_drvdata(pdev, NULL); - - pci_disable_device(pdev); - - DPRINTK("EXIT\n"); -} - - -/* Serial EEPROM section. */ - -/* EEPROM_Ctrl bits. */ -#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */ -#define EE_CS 0x08 /* EEPROM chip select. */ -#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */ -#define EE_WRITE_0 0x00 -#define EE_WRITE_1 0x02 -#define EE_DATA_READ 0x01 /* EEPROM chip data out. */ -#define EE_ENB (0x80 | EE_CS) - -/* Delay between EEPROM clock transitions. - No extra delay is needed with 33Mhz PCI, but 66Mhz may change this. -*/ - -#define eeprom_delay() readl(ee_addr) - -/* The EEPROM commands include the alway-set leading bit. */ -#define EE_WRITE_CMD (5) -#define EE_READ_CMD (6) -#define EE_ERASE_CMD (7) - -static int __devinit read_eeprom(void *ioaddr, int location, int addr_len) -{ - int i; - unsigned retval = 0; - void *ee_addr = ioaddr + Cfg9346; - int read_cmd = location | (EE_READ_CMD << addr_len); - - DPRINTK("ENTER\n"); - - writeb(EE_ENB & ~EE_CS, ee_addr); - writeb(EE_ENB, ee_addr); - eeprom_delay(); - - /* Shift the read command bits out. */ - for (i = 4 + addr_len; i >= 0; i--) { - int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; - writeb(EE_ENB | dataval, ee_addr); - eeprom_delay(); - writeb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr); - eeprom_delay(); - } - writeb(EE_ENB, ee_addr); - eeprom_delay(); - - for (i = 16; i > 0; i--) { - writeb(EE_ENB | EE_SHIFT_CLK, ee_addr); - eeprom_delay(); - retval = - (retval << 1) | ((readb(ee_addr) & EE_DATA_READ) ? 1 : - 0); - writeb(EE_ENB, ee_addr); - eeprom_delay(); - } - - /* Terminate the EEPROM access. */ - writeb(~EE_CS, ee_addr); - eeprom_delay(); - - DPRINTK("EXIT - returning %d\n", retval); - return retval; -} - -/* MII serial management: mostly bogus for now. */ -/* Read and write the MII management registers using software-generated - serial MDIO protocol. - The maximum data clock rate is 2.5 Mhz. The minimum timing is usually - met by back-to-back PCI I/O cycles, but we insert a delay to avoid - "overclocking" issues. */ -#define MDIO_DIR 0x80 -#define MDIO_DATA_OUT 0x04 -#define MDIO_DATA_IN 0x02 -#define MDIO_CLK 0x01 -#define MDIO_WRITE0 (MDIO_DIR) -#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT) - -#define mdio_delay() readb(mdio_addr) - - -static char mii_2_8139_map[8] = { - BasicModeCtrl, - BasicModeStatus, - 0, - 0, - NWayAdvert, - NWayLPAR, - NWayExpansion, - 0 -}; - - -/* Syncronize the MII management interface by shifting 32 one bits out. */ -static void mdio_sync(void *mdio_addr) -{ - int i; - - DPRINTK("ENTER\n"); - - for (i = 32; i >= 0; i--) { - writeb(MDIO_WRITE1, mdio_addr); - mdio_delay(); - writeb(MDIO_WRITE1 | MDIO_CLK, mdio_addr); - mdio_delay(); - } - - DPRINTK("EXIT\n"); -} - - -static int mdio_read(struct net_device *dev, int phy_id, int location) -{ - struct netdrv_private *tp = netdev_priv(dev); - void *mdio_addr = tp->mmio_addr + Config4; - int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; - int retval = 0; - int i; - - DPRINTK("ENTER\n"); - - if (phy_id > 31) { /* Really a 8139. Use internal registers. */ - DPRINTK("EXIT after directly using 8139 internal regs\n"); - return location < 8 && mii_2_8139_map[location] ? - readw(tp->mmio_addr + mii_2_8139_map[location]) : 0; - } - mdio_sync(mdio_addr); - /* Shift the read command bits out. */ - for (i = 15; i >= 0; i--) { - int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0; - - writeb(MDIO_DIR | dataval, mdio_addr); - mdio_delay(); - writeb(MDIO_DIR | dataval | MDIO_CLK, mdio_addr); - mdio_delay(); - } - - /* Read the two transition, 16 data, and wire-idle bits. */ - for (i = 19; i > 0; i--) { - writeb(0, mdio_addr); - mdio_delay(); - retval = ((retval << 1) | ((readb(mdio_addr) & MDIO_DATA_IN)) - ? 1 : 0); - writeb(MDIO_CLK, mdio_addr); - mdio_delay(); - } - - DPRINTK("EXIT, returning %d\n", (retval >> 1) & 0xffff); - return (retval >> 1) & 0xffff; -} - - -static void mdio_write(struct net_device *dev, int phy_id, int location, - int value) -{ - struct netdrv_private *tp = netdev_priv(dev); - void *mdio_addr = tp->mmio_addr + Config4; - int mii_cmd = - (0x5002 << 16) | (phy_id << 23) | (location << 18) | value; - int i; - - DPRINTK("ENTER\n"); - - if (phy_id > 31) { /* Really a 8139. Use internal registers. */ - if (location < 8 && mii_2_8139_map[location]) { - writew(value, - tp->mmio_addr + mii_2_8139_map[location]); - readw(tp->mmio_addr + mii_2_8139_map[location]); - } - DPRINTK("EXIT after directly using 8139 internal regs\n"); - return; - } - mdio_sync(mdio_addr); - - /* Shift the command bits out. */ - for (i = 31; i >= 0; i--) { - int dataval = - (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; - writeb(dataval, mdio_addr); - mdio_delay(); - writeb(dataval | MDIO_CLK, mdio_addr); - mdio_delay(); - } - - /* Clear out extra bits. */ - for (i = 2; i > 0; i--) { - writeb(0, mdio_addr); - mdio_delay(); - writeb(MDIO_CLK, mdio_addr); - mdio_delay(); - } - - DPRINTK("EXIT\n"); -} - - -static int netdrv_open(struct net_device *dev) -{ - struct netdrv_private *tp = netdev_priv(dev); - int retval; - void *ioaddr = tp->mmio_addr; - - DPRINTK("ENTER\n"); - - retval = request_irq(dev->irq, netdrv_interrupt, IRQF_SHARED, dev->name, dev); - if (retval) { - DPRINTK("EXIT, returning %d\n", retval); - return retval; - } - - tp->tx_bufs = pci_alloc_consistent(tp->pci_dev, TX_BUF_TOT_LEN, - &tp->tx_bufs_dma); - tp->rx_ring = pci_alloc_consistent(tp->pci_dev, RX_BUF_TOT_LEN, - &tp->rx_ring_dma); - if (tp->tx_bufs == NULL || tp->rx_ring == NULL) { - free_irq(dev->irq, dev); - - if (tp->tx_bufs) - pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN, - tp->tx_bufs, tp->tx_bufs_dma); - if (tp->rx_ring) - pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN, - tp->rx_ring, tp->rx_ring_dma); - - DPRINTK("EXIT, returning -ENOMEM\n"); - return -ENOMEM; - - } - - tp->full_duplex = tp->duplex_lock; - tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000; - - netdrv_init_ring(dev); - netdrv_hw_start(dev); - - netdev_dbg(dev, "ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n", - (unsigned long long)pci_resource_start(tp->pci_dev, 1), - dev->irq, NETDRV_R8(MediaStatus), - tp->full_duplex ? "full" : "half"); - - /* Set the timer to switch to check for link beat and perhaps switch - to an alternate media type. */ - init_timer(&tp->timer); - tp->timer.expires = jiffies + 3 * HZ; - tp->timer.data = (unsigned long) dev; - tp->timer.function = netdrv_timer; - add_timer(&tp->timer); - - DPRINTK("EXIT, returning 0\n"); - return 0; -} - - -/* Start the hardware at open or resume. */ -static void netdrv_hw_start(struct net_device *dev) -{ - struct netdrv_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; - u32 i; - - DPRINTK("ENTER\n"); - - /* Soft reset the chip. */ - NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | CmdReset); - udelay(100); - - /* Check that the chip has finished the reset. */ - for (i = 1000; i > 0; i--) - if ((NETDRV_R8(ChipCmd) & CmdReset) == 0) - break; - - /* Restore our idea of the MAC address. */ - NETDRV_W32_F(MAC0 + 0, cpu_to_le32(*(u32 *)(dev->dev_addr + 0))); - NETDRV_W32_F(MAC0 + 4, cpu_to_le32(*(u32 *)(dev->dev_addr + 4))); - - /* Must enable Tx/Rx before setting transfer thresholds! */ - NETDRV_W8_F(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | - CmdRxEnb | CmdTxEnb); - - i = netdrv_rx_config | - (NETDRV_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask); - NETDRV_W32_F(RxConfig, i); - - /* Check this value: the documentation for IFG contradicts ifself. */ - NETDRV_W32(TxConfig, (TX_DMA_BURST << TxDMAShift)); - - /* unlock Config[01234] and BMCR register writes */ - NETDRV_W8_F(Cfg9346, Cfg9346_Unlock); - udelay(10); - - tp->cur_rx = 0; - - /* Lock Config[01234] and BMCR register writes */ - NETDRV_W8_F(Cfg9346, Cfg9346_Lock); - udelay(10); - - /* init Rx ring buffer DMA address */ - NETDRV_W32_F(RxBuf, tp->rx_ring_dma); - - /* init Tx buffer DMA addresses */ - for (i = 0; i < NUM_TX_DESC; i++) - NETDRV_W32_F(TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs)); - - NETDRV_W32_F(RxMissed, 0); - - netdrv_set_rx_mode(dev); - - /* no early-rx interrupts */ - NETDRV_W16(MultiIntr, NETDRV_R16(MultiIntr) & MultiIntrClear); - - /* make sure RxTx has started */ - NETDRV_W8_F(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | - CmdRxEnb | CmdTxEnb); - - /* Enable all known interrupts by setting the interrupt mask. */ - NETDRV_W16_F(IntrMask, netdrv_intr_mask); - - netif_start_queue(dev); - - DPRINTK("EXIT\n"); -} - - -/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ -static void netdrv_init_ring(struct net_device *dev) -{ - struct netdrv_private *tp = netdev_priv(dev); - int i; - - DPRINTK("ENTER\n"); - - tp->cur_rx = 0; - atomic_set(&tp->cur_tx, 0); - atomic_set(&tp->dirty_tx, 0); - - for (i = 0; i < NUM_TX_DESC; i++) { - tp->tx_info[i].skb = NULL; - tp->tx_info[i].mapping = 0; - tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE]; - } - - DPRINTK("EXIT\n"); -} - - -static void netdrv_timer(unsigned long data) -{ - struct net_device *dev = (struct net_device *) data; - struct netdrv_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; - int next_tick = 60 * HZ; - int mii_lpa; - - mii_lpa = mdio_read(dev, tp->phys[0], MII_LPA); - - if (!tp->duplex_lock && mii_lpa != 0xffff) { - int duplex = ((mii_lpa & LPA_100FULL) || - (mii_lpa & 0x01C0) == 0x0040); - if (tp->full_duplex != duplex) { - tp->full_duplex = duplex; - netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n", - tp->full_duplex ? "full" : "half", - tp->phys[0], mii_lpa); - NETDRV_W8(Cfg9346, Cfg9346_Unlock); - NETDRV_W8(Config1, tp->full_duplex ? 0x60 : 0x20); - NETDRV_W8(Cfg9346, Cfg9346_Lock); - } - } - - netdev_dbg(dev, "Media selection tick, Link partner %04x\n", - NETDRV_R16(NWayLPAR)); - netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x RxStatus %04lx\n", - NETDRV_R16(IntrMask), - NETDRV_R16(IntrStatus), - NETDRV_R32(RxEarlyStatus)); - netdev_dbg(dev, "Chip config %02x %02x\n", - NETDRV_R8(Config0), NETDRV_R8(Config1)); - - tp->timer.expires = jiffies + next_tick; - add_timer(&tp->timer); -} - - -static void netdrv_tx_clear(struct net_device *dev) -{ - int i; - struct netdrv_private *tp = netdev_priv(dev); - - atomic_set(&tp->cur_tx, 0); - atomic_set(&tp->dirty_tx, 0); - - /* Dump the unsent Tx packets. */ - for (i = 0; i < NUM_TX_DESC; i++) { - struct ring_info *rp = &tp->tx_info[i]; - if (rp->mapping != 0) { - pci_unmap_single(tp->pci_dev, rp->mapping, - rp->skb->len, PCI_DMA_TODEVICE); - rp->mapping = 0; - } - if (rp->skb) { - dev_kfree_skb(rp->skb); - rp->skb = NULL; - dev->stats.tx_dropped++; - } - } -} - - -static void netdrv_tx_timeout(struct net_device *dev) -{ - struct netdrv_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; - int i; - u8 tmp8; - unsigned long flags; - - netdev_dbg(dev, "Transmit timeout, status %02x %04x media %02x\n", - NETDRV_R8(ChipCmd), - NETDRV_R16(IntrStatus), - NETDRV_R8(MediaStatus)); - - /* disable Tx ASAP, if not already */ - tmp8 = NETDRV_R8(ChipCmd); - if (tmp8 & CmdTxEnb) - NETDRV_W8(ChipCmd, tmp8 & ~CmdTxEnb); - - /* Disable interrupts by clearing the interrupt mask. */ - NETDRV_W16(IntrMask, 0x0000); - - /* Emit info to figure out what went wrong. */ - netdev_dbg(dev, "Tx queue start entry %d dirty entry %d\n", - atomic_read(&tp->cur_tx), - atomic_read(&tp->dirty_tx)); - for (i = 0; i < NUM_TX_DESC; i++) - netdev_dbg(dev, "Tx descriptor %d is %08lx%s\n", - i, NETDRV_R32(TxStatus0 + (i * 4)), - i == atomic_read(&tp->dirty_tx) % NUM_TX_DESC ? - "(queue head)" : ""); - - /* Stop a shared interrupt from scavenging while we are. */ - spin_lock_irqsave(&tp->lock, flags); - - netdrv_tx_clear(dev); - - spin_unlock_irqrestore(&tp->lock, flags); - - /* ...and finally, reset everything */ - netdrv_hw_start(dev); - - netif_wake_queue(dev); -} - - - -static int netdrv_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct netdrv_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; - int entry; - - /* Calculate the next Tx descriptor entry. */ - entry = atomic_read(&tp->cur_tx) % NUM_TX_DESC; - - assert(tp->tx_info[entry].skb == NULL); - assert(tp->tx_info[entry].mapping == 0); - - tp->tx_info[entry].skb = skb; - /* tp->tx_info[entry].mapping = 0; */ - skb_copy_from_linear_data(skb, tp->tx_buf[entry], skb->len); - - /* Note: the chip doesn't have auto-pad! */ - NETDRV_W32(TxStatus0 + (entry * sizeof(u32)), - tp->tx_flag | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN)); - - atomic_inc(&tp->cur_tx); - if ((atomic_read(&tp->cur_tx) - atomic_read(&tp->dirty_tx)) >= NUM_TX_DESC) - netif_stop_queue(dev); - - netdev_dbg(dev, "Queued Tx packet at %p size %u to slot %d\n", - skb->data, skb->len, entry); - - return NETDEV_TX_OK; -} - - -static void netdrv_tx_interrupt(struct net_device *dev, - struct netdrv_private *tp, - void *ioaddr) -{ - int cur_tx, dirty_tx, tx_left; - - assert(dev != NULL); - assert(tp != NULL); - assert(ioaddr != NULL); - - dirty_tx = atomic_read(&tp->dirty_tx); - - cur_tx = atomic_read(&tp->cur_tx); - tx_left = cur_tx - dirty_tx; - while (tx_left > 0) { - int entry = dirty_tx % NUM_TX_DESC; - int txstatus; - - txstatus = NETDRV_R32(TxStatus0 + (entry * sizeof(u32))); - - if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted))) - break; /* It still hasn't been Txed */ - - /* Note: TxCarrierLost is always asserted at 100mbps. */ - if (txstatus & (TxOutOfWindow | TxAborted)) { - /* There was an major error, log it. */ - netdev_dbg(dev, "Transmit error, Tx status %#08x\n", - txstatus); - dev->stats.tx_errors++; - if (txstatus & TxAborted) { - dev->stats.tx_aborted_errors++; - NETDRV_W32(TxConfig, TxClearAbt | (TX_DMA_BURST << TxDMAShift)); - } - if (txstatus & TxCarrierLost) - dev->stats.tx_carrier_errors++; - if (txstatus & TxOutOfWindow) - dev->stats.tx_window_errors++; - } else { - if (txstatus & TxUnderrun) { - /* Add 64 to the Tx FIFO threshold. */ - if (tp->tx_flag < 0x00300000) - tp->tx_flag += 0x00020000; - dev->stats.tx_fifo_errors++; - } - dev->stats.collisions += (txstatus >> 24) & 15; - dev->stats.tx_bytes += txstatus & 0x7ff; - dev->stats.tx_packets++; - } - - /* Free the original skb. */ - if (tp->tx_info[entry].mapping != 0) { - pci_unmap_single(tp->pci_dev, - tp->tx_info[entry].mapping, - tp->tx_info[entry].skb->len, - PCI_DMA_TODEVICE); - tp->tx_info[entry].mapping = 0; - } - dev_kfree_skb_irq(tp->tx_info[entry].skb); - tp->tx_info[entry].skb = NULL; - dirty_tx++; - if (dirty_tx < 0) { /* handle signed int overflow */ - atomic_sub(cur_tx, &tp->cur_tx); /* XXX racy? */ - dirty_tx = cur_tx - tx_left + 1; - } - if (netif_queue_stopped(dev)) - netif_wake_queue(dev); - - cur_tx = atomic_read(&tp->cur_tx); - tx_left = cur_tx - dirty_tx; - - } - -#ifndef NETDRV_NDEBUG - if (atomic_read(&tp->cur_tx) - dirty_tx > NUM_TX_DESC) { - netdev_err(dev, "Out-of-sync dirty pointer, %d vs. %d\n", - dirty_tx, atomic_read(&tp->cur_tx)); - dirty_tx += NUM_TX_DESC; - } -#endif /* NETDRV_NDEBUG */ - - atomic_set(&tp->dirty_tx, dirty_tx); -} - - -/* TODO: clean this up! Rx reset need not be this intensive */ -static void netdrv_rx_err(u32 rx_status, struct net_device *dev, - struct netdrv_private *tp, void *ioaddr) -{ - u8 tmp8; - int tmp_work = 1000; - - netdev_dbg(dev, "Ethernet frame had errors, status %08x\n", rx_status); - if (rx_status & RxTooLong) - netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n", - rx_status); - /* A.C.: The chip hangs here. */ - dev->stats.rx_errors++; - if (rx_status & (RxBadSymbol | RxBadAlign)) - dev->stats.rx_frame_errors++; - if (rx_status & (RxRunt | RxTooLong)) - dev->stats.rx_length_errors++; - if (rx_status & RxCRCErr) - dev->stats.rx_crc_errors++; - /* Reset the receiver, based on RealTek recommendation.(Bug?) */ - tp->cur_rx = 0; - - /* disable receive */ - tmp8 = NETDRV_R8(ChipCmd) & ChipCmdClear; - NETDRV_W8_F(ChipCmd, tmp8 | CmdTxEnb); - - /* A.C.: Reset the multicast list. */ - netdrv_set_rx_mode(dev); - - /* XXX potentially temporary hack to - * restart hung receiver */ - while (--tmp_work > 0) { - tmp8 = NETDRV_R8(ChipCmd); - if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb)) - break; - NETDRV_W8_F(ChipCmd, - (tmp8 & ChipCmdClear) | CmdRxEnb | CmdTxEnb); - } - - /* G.S.: Re-enable receiver */ - /* XXX temporary hack to work around receiver hang */ - netdrv_set_rx_mode(dev); - - if (tmp_work <= 0) - netdev_warn(dev, "tx/rx enable wait too long\n"); -} - - -/* The data sheet doesn't describe the Rx ring at all, so I'm guessing at the - field alignments and semantics. */ -static void netdrv_rx_interrupt(struct net_device *dev, - struct netdrv_private *tp, void *ioaddr) -{ - unsigned char *rx_ring; - u16 cur_rx; - - assert(dev != NULL); - assert(tp != NULL); - assert(ioaddr != NULL); - - rx_ring = tp->rx_ring; - cur_rx = tp->cur_rx; - - netdev_dbg(dev, "In netdrv_rx(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n", - cur_rx, NETDRV_R16(RxBufAddr), - NETDRV_R16(RxBufPtr), NETDRV_R8(ChipCmd)); - - while ((NETDRV_R8(ChipCmd) & RxBufEmpty) == 0) { - int ring_offset = cur_rx % RX_BUF_LEN; - u32 rx_status; - unsigned int rx_size; - unsigned int pkt_size; - struct sk_buff *skb; - - /* read size+status of next frame from DMA ring buffer */ - rx_status = le32_to_cpu(*(u32 *)(rx_ring + ring_offset)); - rx_size = rx_status >> 16; - pkt_size = rx_size - 4; - - netdev_dbg(dev, "netdrv_rx() status %04x, size %04x, cur %04x\n", - rx_status, rx_size, cur_rx); -#if defined(NETDRV_DEBUG) && (NETDRV_DEBUG > 2) - print_hex_dump_bytes("Frame contents: ", HEX_DUMP_OFFSET, - &rx_ring[ring_offset], 70); -#endif - - /* If Rx err or invalid rx_size/rx_status received - *(which happens if we get lost in the ring), - * Rx process gets reset, so we abort any further - * Rx processing. - */ - if ((rx_size > (MAX_ETH_FRAME_SIZE+4)) || - (!(rx_status & RxStatusOK))) { - netdrv_rx_err(rx_status, dev, tp, ioaddr); - return; - } - - /* Malloc up new buffer, compatible with net-2e. */ - /* Omit the four octet CRC from the length. */ - - /* TODO: consider allocating skb's outside of - * interrupt context, both to speed interrupt processing, - * and also to reduce the chances of having to - * drop packets here under memory pressure. - */ - - skb = dev_alloc_skb(pkt_size + 2); - if (skb) { - skb_reserve(skb, 2); /* 16 byte align the IP fields. */ - - skb_copy_to_linear_data(skb, &rx_ring[ring_offset + 4], pkt_size); - skb_put(skb, pkt_size); - - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_bytes += pkt_size; - dev->stats.rx_packets++; - } else { - netdev_warn(dev, "Memory squeeze, dropping packet\n"); - dev->stats.rx_dropped++; - } - - cur_rx = (cur_rx + rx_size + 4 + 3) & ~3; - NETDRV_W16_F(RxBufPtr, cur_rx - 16); - } - - netdev_dbg(dev, "Done netdrv_rx(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n", - cur_rx, NETDRV_R16(RxBufAddr), - NETDRV_R16(RxBufPtr), NETDRV_R8(ChipCmd)); - - tp->cur_rx = cur_rx; -} - - -static void netdrv_weird_interrupt(struct net_device *dev, - struct netdrv_private *tp, - void *ioaddr, - int status, int link_changed) -{ - netdev_printk(KERN_DEBUG, dev, "Abnormal interrupt, status %08x\n", - status); - - assert(dev != NULL); - assert(tp != NULL); - assert(ioaddr != NULL); - - /* Update the error count. */ - dev->stats.rx_missed_errors += NETDRV_R32(RxMissed); - NETDRV_W32(RxMissed, 0); - - if ((status & RxUnderrun) && link_changed && - (tp->drv_flags & HAS_LNK_CHNG)) { - /* Really link-change on new chips. */ - int lpar = NETDRV_R16(NWayLPAR); - int duplex = ((lpar & 0x0100) || (lpar & 0x01C0) == 0x0040 || - tp->duplex_lock); - if (tp->full_duplex != duplex) { - tp->full_duplex = duplex; - NETDRV_W8(Cfg9346, Cfg9346_Unlock); - NETDRV_W8(Config1, tp->full_duplex ? 0x60 : 0x20); - NETDRV_W8(Cfg9346, Cfg9346_Lock); - } - status &= ~RxUnderrun; - } - - /* XXX along with netdrv_rx_err, are we double-counting errors? */ - if (status & (RxUnderrun | RxOverflow | RxErr | RxFIFOOver)) - dev->stats.rx_errors++; - - if (status & (PCSTimeout)) - dev->stats.rx_length_errors++; - if (status & (RxUnderrun | RxFIFOOver)) - dev->stats.rx_fifo_errors++; - if (status & RxOverflow) { - dev->stats.rx_over_errors++; - tp->cur_rx = NETDRV_R16(RxBufAddr) % RX_BUF_LEN; - NETDRV_W16_F(RxBufPtr, tp->cur_rx - 16); - } - if (status & PCIErr) { - u16 pci_cmd_status; - pci_read_config_word(tp->pci_dev, PCI_STATUS, &pci_cmd_status); - - netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status); - } -} - - -/* The interrupt handler does all of the Rx thread work and cleans up - after the Tx thread. */ -static irqreturn_t netdrv_interrupt(int irq, void *dev_instance) -{ - struct net_device *dev = (struct net_device *) dev_instance; - struct netdrv_private *tp = netdev_priv(dev); - int boguscnt = max_interrupt_work; - void *ioaddr = tp->mmio_addr; - int status = 0, link_changed = 0; /* avoid bogus "uninit" warning */ - int handled = 0; - - spin_lock(&tp->lock); - - do { - status = NETDRV_R16(IntrStatus); - - /* h/w no longer present(hotplug?) or major error, bail */ - if (status == 0xFFFF) - break; - - handled = 1; - /* Acknowledge all of the current interrupt sources ASAP */ - NETDRV_W16_F(IntrStatus, status); - - netdev_dbg(dev, "interrupt status=%#04x new intstat=%#04x\n", - status, NETDRV_R16(IntrStatus)); - - if ((status & - (PCIErr | PCSTimeout | RxUnderrun | RxOverflow | - RxFIFOOver | TxErr | TxOK | RxErr | RxOK)) == 0) - break; - - /* Check uncommon events with one test. */ - if (status & (PCIErr | PCSTimeout | RxUnderrun | RxOverflow | - RxFIFOOver | TxErr | RxErr)) - netdrv_weird_interrupt(dev, tp, ioaddr, - status, link_changed); - - if (status & (RxOK | RxUnderrun | RxOverflow | RxFIFOOver)) /* Rx interrupt */ - netdrv_rx_interrupt(dev, tp, ioaddr); - - if (status & (TxOK | TxErr)) - netdrv_tx_interrupt(dev, tp, ioaddr); - - boguscnt--; - } while (boguscnt > 0); - - if (boguscnt <= 0) { - netdev_warn(dev, "Too much work at interrupt, IntrStatus=%#04x\n", - status); - - /* Clear all interrupt sources. */ - NETDRV_W16(IntrStatus, 0xffff); - } - - spin_unlock(&tp->lock); - - netdev_dbg(dev, "exiting interrupt, intr_status=%#04x\n", - NETDRV_R16(IntrStatus)); - return IRQ_RETVAL(handled); -} - - -static int netdrv_close(struct net_device *dev) -{ - struct netdrv_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; - unsigned long flags; - - DPRINTK("ENTER\n"); - - netif_stop_queue(dev); - - netdev_dbg(dev, "Shutting down ethercard, status was %#04x\n", - NETDRV_R16(IntrStatus)); - - del_timer_sync(&tp->timer); - - spin_lock_irqsave(&tp->lock, flags); - - /* Stop the chip's Tx and Rx DMA processes. */ - NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear)); - - /* Disable interrupts by clearing the interrupt mask. */ - NETDRV_W16(IntrMask, 0x0000); - - /* Update the error counts. */ - dev->stats.rx_missed_errors += NETDRV_R32(RxMissed); - NETDRV_W32(RxMissed, 0); - - spin_unlock_irqrestore(&tp->lock, flags); - - free_irq(dev->irq, dev); - - netdrv_tx_clear(dev); - - pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN, - tp->rx_ring, tp->rx_ring_dma); - pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN, - tp->tx_bufs, tp->tx_bufs_dma); - tp->rx_ring = NULL; - tp->tx_bufs = NULL; - - /* Green! Put the chip in low-power mode. */ - NETDRV_W8(Cfg9346, Cfg9346_Unlock); - NETDRV_W8(Config1, 0x03); - NETDRV_W8(Cfg9346, Cfg9346_Lock); - - DPRINTK("EXIT\n"); - return 0; -} - - -static int netdrv_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct netdrv_private *tp = netdev_priv(dev); - struct mii_ioctl_data *data = if_mii(rq); - unsigned long flags; - int rc = 0; - - DPRINTK("ENTER\n"); - - switch (cmd) { - case SIOCGMIIPHY: /* Get address of MII PHY in use. */ - data->phy_id = tp->phys[0] & 0x3f; - /* Fall Through */ - - case SIOCGMIIREG: /* Read MII PHY register. */ - spin_lock_irqsave(&tp->lock, flags); - data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f); - spin_unlock_irqrestore(&tp->lock, flags); - break; - - case SIOCSMIIREG: /* Write MII PHY register. */ - spin_lock_irqsave(&tp->lock, flags); - mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); - spin_unlock_irqrestore(&tp->lock, flags); - break; - - default: - rc = -EOPNOTSUPP; - break; - } - - DPRINTK("EXIT, returning %d\n", rc); - return rc; -} - -/* Set or clear the multicast filter for this adaptor. - This routine is not state sensitive and need not be SMP locked. */ - -static void netdrv_set_rx_mode(struct net_device *dev) -{ - struct netdrv_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; - u32 mc_filter[2]; /* Multicast hash filter */ - int rx_mode; - u32 tmp; - - DPRINTK("ENTER\n"); - - netdev_dbg(dev, "%s(%04x) done -- Rx config %08lx\n", - __func__, dev->flags, NETDRV_R32(RxConfig)); - - /* Note: do not reorder, GCC is clever about common statements. */ - if (dev->flags & IFF_PROMISC) { - rx_mode = - AcceptBroadcast | AcceptMulticast | AcceptMyPhys | - AcceptAllPhys; - mc_filter[1] = mc_filter[0] = 0xffffffff; - } else if ((netdev_mc_count(dev) > multicast_filter_limit) || - (dev->flags & IFF_ALLMULTI)) { - /* Too many to filter perfectly -- accept all multicasts. */ - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; - mc_filter[1] = mc_filter[0] = 0xffffffff; - } else { - struct netdev_hw_addr *ha; - - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; - mc_filter[1] = mc_filter[0] = 0; - netdev_for_each_mc_addr(ha, dev) { - int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26; - - mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); - } - } - - /* if called from irq handler, lock already acquired */ - if (!in_irq()) - spin_lock_irq(&tp->lock); - - /* We can safely update without stopping the chip. */ - tmp = netdrv_rx_config | rx_mode | - (NETDRV_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask); - NETDRV_W32_F(RxConfig, tmp); - NETDRV_W32_F(MAR0 + 0, mc_filter[0]); - NETDRV_W32_F(MAR0 + 4, mc_filter[1]); - - if (!in_irq()) - spin_unlock_irq(&tp->lock); - - DPRINTK("EXIT\n"); -} - - -#ifdef CONFIG_PM - -static int netdrv_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct netdrv_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; - unsigned long flags; - - if (!netif_running(dev)) - return 0; - netif_device_detach(dev); - - spin_lock_irqsave(&tp->lock, flags); - - /* Disable interrupts, stop Tx and Rx. */ - NETDRV_W16(IntrMask, 0x0000); - NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear)); - - /* Update the error counts. */ - dev->stats.rx_missed_errors += NETDRV_R32(RxMissed); - NETDRV_W32(RxMissed, 0); - - spin_unlock_irqrestore(&tp->lock, flags); - - pci_save_state(pdev); - pci_set_power_state(pdev, PCI_D3hot); - - return 0; -} - - -static int netdrv_resume(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - /*struct netdrv_private *tp = netdev_priv(dev);*/ - - if (!netif_running(dev)) - return 0; - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - netif_device_attach(dev); - netdrv_hw_start(dev); - - return 0; -} - -#endif /* CONFIG_PM */ - - -static struct pci_driver netdrv_pci_driver = { - .name = MODNAME, - .id_table = netdrv_pci_tbl, - .probe = netdrv_init_one, - .remove = __devexit_p(netdrv_remove_one), -#ifdef CONFIG_PM - .suspend = netdrv_suspend, - .resume = netdrv_resume, -#endif /* CONFIG_PM */ -}; - - -static int __init netdrv_init_module(void) -{ -/* when a module, this is printed whether or not devices are found in probe */ -#ifdef MODULE - printk(version); -#endif - return pci_register_driver(&netdrv_pci_driver); -} - - -static void __exit netdrv_cleanup_module(void) -{ - pci_unregister_driver(&netdrv_pci_driver); -} - - -module_init(netdrv_init_module); -module_exit(netdrv_cleanup_module); |