diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/parport/parport_pc.c | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/parport/parport_pc.c')
-rw-r--r-- | drivers/parport/parport_pc.c | 3415 |
1 files changed, 3415 insertions, 0 deletions
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c new file mode 100644 index 0000000..c5774e7 --- /dev/null +++ b/drivers/parport/parport_pc.c @@ -0,0 +1,3415 @@ +/* Low-level parallel-port routines for 8255-based PC-style hardware. + * + * Authors: Phil Blundell <philb@gnu.org> + * Tim Waugh <tim@cyberelk.demon.co.uk> + * Jose Renau <renau@acm.org> + * David Campbell <campbell@torque.net> + * Andrea Arcangeli + * + * based on work by Grant Guenther <grant@torque.net> and Phil Blundell. + * + * Cleaned up include files - Russell King <linux@arm.uk.linux.org> + * DMA support - Bert De Jonghe <bert@sophis.be> + * Many ECP bugs fixed. Fred Barnes & Jamie Lokier, 1999 + * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G. + * Various hacks, Fred Barnes, 04/2001 + * Updated probing logic - Adam Belay <ambx1@neo.rr.com> + */ + +/* This driver should work with any hardware that is broadly compatible + * with that in the IBM PC. This applies to the majority of integrated + * I/O chipsets that are commonly available. The expected register + * layout is: + * + * base+0 data + * base+1 status + * base+2 control + * + * In addition, there are some optional registers: + * + * base+3 EPP address + * base+4 EPP data + * base+0x400 ECP config A + * base+0x401 ECP config B + * base+0x402 ECP control + * + * All registers are 8 bits wide and read/write. If your hardware differs + * only in register addresses (eg because your registers are on 32-bit + * word boundaries) then you can alter the constants in parport_pc.h to + * accommodate this. + * + * Note that the ECP registers may not start at offset 0x400 for PCI cards, + * but rather will start at port->base_hi. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/pnp.h> +#include <linux/sysctl.h> + +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/uaccess.h> + +#include <linux/parport.h> +#include <linux/parport_pc.h> +#include <linux/via.h> +#include <asm/parport.h> + +#define PARPORT_PC_MAX_PORTS PARPORT_MAX + +/* ECR modes */ +#define ECR_SPP 00 +#define ECR_PS2 01 +#define ECR_PPF 02 +#define ECR_ECP 03 +#define ECR_EPP 04 +#define ECR_VND 05 +#define ECR_TST 06 +#define ECR_CNF 07 +#define ECR_MODE_MASK 0xe0 +#define ECR_WRITE(p,v) frob_econtrol((p),0xff,(v)) + +#undef DEBUG + +#ifdef DEBUG +#define DPRINTK printk +#else +#define DPRINTK(stuff...) +#endif + + +#define NR_SUPERIOS 3 +static struct superio_struct { /* For Super-IO chips autodetection */ + int io; + int irq; + int dma; +} superios[NR_SUPERIOS] __devinitdata = { {0,},}; + +static int user_specified; +#if defined(CONFIG_PARPORT_PC_SUPERIO) || \ + (defined(CONFIG_PARPORT_1284) && defined(CONFIG_PARPORT_PC_FIFO)) +static int verbose_probing; +#endif +static int pci_registered_parport; +static int pnp_registered_parport; + +/* frob_control, but for ECR */ +static void frob_econtrol (struct parport *pb, unsigned char m, + unsigned char v) +{ + unsigned char ectr = 0; + + if (m != 0xff) + ectr = inb (ECONTROL (pb)); + + DPRINTK (KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n", + m, v, ectr, (ectr & ~m) ^ v); + + outb ((ectr & ~m) ^ v, ECONTROL (pb)); +} + +static __inline__ void frob_set_mode (struct parport *p, int mode) +{ + frob_econtrol (p, ECR_MODE_MASK, mode << 5); +} + +#ifdef CONFIG_PARPORT_PC_FIFO +/* Safely change the mode bits in the ECR + Returns: + 0 : Success + -EBUSY: Could not drain FIFO in some finite amount of time, + mode not changed! + */ +static int change_mode(struct parport *p, int m) +{ + const struct parport_pc_private *priv = p->physport->private_data; + unsigned char oecr; + int mode; + + DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n",m); + + if (!priv->ecr) { + printk (KERN_DEBUG "change_mode: but there's no ECR!\n"); + return 0; + } + + /* Bits <7:5> contain the mode. */ + oecr = inb (ECONTROL (p)); + mode = (oecr >> 5) & 0x7; + if (mode == m) return 0; + + if (mode >= 2 && !(priv->ctr & 0x20)) { + /* This mode resets the FIFO, so we may + * have to wait for it to drain first. */ + unsigned long expire = jiffies + p->physport->cad->timeout; + int counter; + switch (mode) { + case ECR_PPF: /* Parallel Port FIFO mode */ + case ECR_ECP: /* ECP Parallel Port mode */ + /* Busy wait for 200us */ + for (counter = 0; counter < 40; counter++) { + if (inb (ECONTROL (p)) & 0x01) + break; + if (signal_pending (current)) break; + udelay (5); + } + + /* Poll slowly. */ + while (!(inb (ECONTROL (p)) & 0x01)) { + if (time_after_eq (jiffies, expire)) + /* The FIFO is stuck. */ + return -EBUSY; + __set_current_state (TASK_INTERRUPTIBLE); + schedule_timeout ((HZ + 99) / 100); + if (signal_pending (current)) + break; + } + } + } + + if (mode >= 2 && m >= 2) { + /* We have to go through mode 001 */ + oecr &= ~(7 << 5); + oecr |= ECR_PS2 << 5; + ECR_WRITE (p, oecr); + } + + /* Set the mode. */ + oecr &= ~(7 << 5); + oecr |= m << 5; + ECR_WRITE (p, oecr); + return 0; +} + +#ifdef CONFIG_PARPORT_1284 +/* Find FIFO lossage; FIFO is reset */ +#if 0 +static int get_fifo_residue (struct parport *p) +{ + int residue; + int cnfga; + const struct parport_pc_private *priv = p->physport->private_data; + + /* Adjust for the contents of the FIFO. */ + for (residue = priv->fifo_depth; ; residue--) { + if (inb (ECONTROL (p)) & 0x2) + /* Full up. */ + break; + + outb (0, FIFO (p)); + } + + printk (KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name, + residue); + + /* Reset the FIFO. */ + frob_set_mode (p, ECR_PS2); + + /* Now change to config mode and clean up. FIXME */ + frob_set_mode (p, ECR_CNF); + cnfga = inb (CONFIGA (p)); + printk (KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga); + + if (!(cnfga & (1<<2))) { + printk (KERN_DEBUG "%s: Accounting for extra byte\n", p->name); + residue++; + } + + /* Don't care about partial PWords until support is added for + * PWord != 1 byte. */ + + /* Back to PS2 mode. */ + frob_set_mode (p, ECR_PS2); + + DPRINTK (KERN_DEBUG "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n", inb (ECONTROL (p))); + return residue; +} +#endif /* 0 */ +#endif /* IEEE 1284 support */ +#endif /* FIFO support */ + +/* + * Clear TIMEOUT BIT in EPP MODE + * + * This is also used in SPP detection. + */ +static int clear_epp_timeout(struct parport *pb) +{ + unsigned char r; + + if (!(parport_pc_read_status(pb) & 0x01)) + return 1; + + /* To clear timeout some chips require double read */ + parport_pc_read_status(pb); + r = parport_pc_read_status(pb); + outb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */ + outb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */ + r = parport_pc_read_status(pb); + + return !(r & 0x01); +} + +/* + * Access functions. + * + * Most of these aren't static because they may be used by the + * parport_xxx_yyy macros. extern __inline__ versions of several + * of these are in parport_pc.h. + */ + +static irqreturn_t parport_pc_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + parport_generic_irq(irq, (struct parport *) dev_id, regs); + /* FIXME! Was it really ours? */ + return IRQ_HANDLED; +} + +static void parport_pc_init_state(struct pardevice *dev, struct parport_state *s) +{ + s->u.pc.ctr = 0xc; + if (dev->irq_func && + dev->port->irq != PARPORT_IRQ_NONE) + /* Set ackIntEn */ + s->u.pc.ctr |= 0x10; + + s->u.pc.ecr = 0x34; /* NetMos chip can cause problems 0x24; + * D.Gruszka VScom */ +} + +static void parport_pc_save_state(struct parport *p, struct parport_state *s) +{ + const struct parport_pc_private *priv = p->physport->private_data; + s->u.pc.ctr = priv->ctr; + if (priv->ecr) + s->u.pc.ecr = inb (ECONTROL (p)); +} + +static void parport_pc_restore_state(struct parport *p, struct parport_state *s) +{ + struct parport_pc_private *priv = p->physport->private_data; + register unsigned char c = s->u.pc.ctr & priv->ctr_writable; + outb (c, CONTROL (p)); + priv->ctr = c; + if (priv->ecr) + ECR_WRITE (p, s->u.pc.ecr); +} + +#ifdef CONFIG_PARPORT_1284 +static size_t parport_pc_epp_read_data (struct parport *port, void *buf, + size_t length, int flags) +{ + size_t got = 0; + + if (flags & PARPORT_W91284PIC) { + unsigned char status; + size_t left = length; + + /* use knowledge about data lines..: + * nFault is 0 if there is at least 1 byte in the Warp's FIFO + * pError is 1 if there are 16 bytes in the Warp's FIFO + */ + status = inb (STATUS (port)); + + while (!(status & 0x08) && (got < length)) { + if ((left >= 16) && (status & 0x20) && !(status & 0x08)) { + /* can grab 16 bytes from warp fifo */ + if (!((long)buf & 0x03)) { + insl (EPPDATA (port), buf, 4); + } else { + insb (EPPDATA (port), buf, 16); + } + buf += 16; + got += 16; + left -= 16; + } else { + /* grab single byte from the warp fifo */ + *((char *)buf) = inb (EPPDATA (port)); + buf++; + got++; + left--; + } + status = inb (STATUS (port)); + if (status & 0x01) { + /* EPP timeout should never occur... */ + printk (KERN_DEBUG "%s: EPP timeout occurred while talking to " + "w91284pic (should not have done)\n", port->name); + clear_epp_timeout (port); + } + } + return got; + } + if ((flags & PARPORT_EPP_FAST) && (length > 1)) { + if (!(((long)buf | length) & 0x03)) { + insl (EPPDATA (port), buf, (length >> 2)); + } else { + insb (EPPDATA (port), buf, length); + } + if (inb (STATUS (port)) & 0x01) { + clear_epp_timeout (port); + return -EIO; + } + return length; + } + for (; got < length; got++) { + *((char*)buf) = inb (EPPDATA(port)); + buf++; + if (inb (STATUS (port)) & 0x01) { + /* EPP timeout */ + clear_epp_timeout (port); + break; + } + } + + return got; +} + +static size_t parport_pc_epp_write_data (struct parport *port, const void *buf, + size_t length, int flags) +{ + size_t written = 0; + + if ((flags & PARPORT_EPP_FAST) && (length > 1)) { + if (!(((long)buf | length) & 0x03)) { + outsl (EPPDATA (port), buf, (length >> 2)); + } else { + outsb (EPPDATA (port), buf, length); + } + if (inb (STATUS (port)) & 0x01) { + clear_epp_timeout (port); + return -EIO; + } + return length; + } + for (; written < length; written++) { + outb (*((char*)buf), EPPDATA(port)); + buf++; + if (inb (STATUS(port)) & 0x01) { + clear_epp_timeout (port); + break; + } + } + + return written; +} + +static size_t parport_pc_epp_read_addr (struct parport *port, void *buf, + size_t length, int flags) +{ + size_t got = 0; + + if ((flags & PARPORT_EPP_FAST) && (length > 1)) { + insb (EPPADDR (port), buf, length); + if (inb (STATUS (port)) & 0x01) { + clear_epp_timeout (port); + return -EIO; + } + return length; + } + for (; got < length; got++) { + *((char*)buf) = inb (EPPADDR (port)); + buf++; + if (inb (STATUS (port)) & 0x01) { + clear_epp_timeout (port); + break; + } + } + + return got; +} + +static size_t parport_pc_epp_write_addr (struct parport *port, + const void *buf, size_t length, + int flags) +{ + size_t written = 0; + + if ((flags & PARPORT_EPP_FAST) && (length > 1)) { + outsb (EPPADDR (port), buf, length); + if (inb (STATUS (port)) & 0x01) { + clear_epp_timeout (port); + return -EIO; + } + return length; + } + for (; written < length; written++) { + outb (*((char*)buf), EPPADDR (port)); + buf++; + if (inb (STATUS (port)) & 0x01) { + clear_epp_timeout (port); + break; + } + } + + return written; +} + +static size_t parport_pc_ecpepp_read_data (struct parport *port, void *buf, + size_t length, int flags) +{ + size_t got; + + frob_set_mode (port, ECR_EPP); + parport_pc_data_reverse (port); + parport_pc_write_control (port, 0x4); + got = parport_pc_epp_read_data (port, buf, length, flags); + frob_set_mode (port, ECR_PS2); + + return got; +} + +static size_t parport_pc_ecpepp_write_data (struct parport *port, + const void *buf, size_t length, + int flags) +{ + size_t written; + + frob_set_mode (port, ECR_EPP); + parport_pc_write_control (port, 0x4); + parport_pc_data_forward (port); + written = parport_pc_epp_write_data (port, buf, length, flags); + frob_set_mode (port, ECR_PS2); + + return written; +} + +static size_t parport_pc_ecpepp_read_addr (struct parport *port, void *buf, + size_t length, int flags) +{ + size_t got; + + frob_set_mode (port, ECR_EPP); + parport_pc_data_reverse (port); + parport_pc_write_control (port, 0x4); + got = parport_pc_epp_read_addr (port, buf, length, flags); + frob_set_mode (port, ECR_PS2); + + return got; +} + +static size_t parport_pc_ecpepp_write_addr (struct parport *port, + const void *buf, size_t length, + int flags) +{ + size_t written; + + frob_set_mode (port, ECR_EPP); + parport_pc_write_control (port, 0x4); + parport_pc_data_forward (port); + written = parport_pc_epp_write_addr (port, buf, length, flags); + frob_set_mode (port, ECR_PS2); + + return written; +} +#endif /* IEEE 1284 support */ + +#ifdef CONFIG_PARPORT_PC_FIFO +static size_t parport_pc_fifo_write_block_pio (struct parport *port, + const void *buf, size_t length) +{ + int ret = 0; + const unsigned char *bufp = buf; + size_t left = length; + unsigned long expire = jiffies + port->physport->cad->timeout; + const int fifo = FIFO (port); + int poll_for = 8; /* 80 usecs */ + const struct parport_pc_private *priv = port->physport->private_data; + const int fifo_depth = priv->fifo_depth; + + port = port->physport; + + /* We don't want to be interrupted every character. */ + parport_pc_disable_irq (port); + /* set nErrIntrEn and serviceIntr */ + frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2)); + + /* Forward mode. */ + parport_pc_data_forward (port); /* Must be in PS2 mode */ + + while (left) { + unsigned char byte; + unsigned char ecrval = inb (ECONTROL (port)); + int i = 0; + + if (need_resched() && time_before (jiffies, expire)) + /* Can't yield the port. */ + schedule (); + + /* Anyone else waiting for the port? */ + if (port->waithead) { + printk (KERN_DEBUG "Somebody wants the port\n"); + break; + } + + if (ecrval & 0x02) { + /* FIFO is full. Wait for interrupt. */ + + /* Clear serviceIntr */ + ECR_WRITE (port, ecrval & ~(1<<2)); + false_alarm: + ret = parport_wait_event (port, HZ); + if (ret < 0) break; + ret = 0; + if (!time_before (jiffies, expire)) { + /* Timed out. */ + printk (KERN_DEBUG "FIFO write timed out\n"); + break; + } + ecrval = inb (ECONTROL (port)); + if (!(ecrval & (1<<2))) { + if (need_resched() && + time_before (jiffies, expire)) + schedule (); + + goto false_alarm; + } + + continue; + } + + /* Can't fail now. */ + expire = jiffies + port->cad->timeout; + + poll: + if (signal_pending (current)) + break; + + if (ecrval & 0x01) { + /* FIFO is empty. Blast it full. */ + const int n = left < fifo_depth ? left : fifo_depth; + outsb (fifo, bufp, n); + bufp += n; + left -= n; + + /* Adjust the poll time. */ + if (i < (poll_for - 2)) poll_for--; + continue; + } else if (i++ < poll_for) { + udelay (10); + ecrval = inb (ECONTROL (port)); + goto poll; + } + + /* Half-full (call me an optimist) */ + byte = *bufp++; + outb (byte, fifo); + left--; + } + +dump_parport_state ("leave fifo_write_block_pio", port); + return length - left; +} + +static size_t parport_pc_fifo_write_block_dma (struct parport *port, + const void *buf, size_t length) +{ + int ret = 0; + unsigned long dmaflag; + size_t left = length; + const struct parport_pc_private *priv = port->physport->private_data; + dma_addr_t dma_addr, dma_handle; + size_t maxlen = 0x10000; /* max 64k per DMA transfer */ + unsigned long start = (unsigned long) buf; + unsigned long end = (unsigned long) buf + length - 1; + +dump_parport_state ("enter fifo_write_block_dma", port); + if (end < MAX_DMA_ADDRESS) { + /* If it would cross a 64k boundary, cap it at the end. */ + if ((start ^ end) & ~0xffffUL) + maxlen = 0x10000 - (start & 0xffff); + + dma_addr = dma_handle = pci_map_single(priv->dev, (void *)buf, length, + PCI_DMA_TODEVICE); + } else { + /* above 16 MB we use a bounce buffer as ISA-DMA is not possible */ + maxlen = PAGE_SIZE; /* sizeof(priv->dma_buf) */ + dma_addr = priv->dma_handle; + dma_handle = 0; + } + + port = port->physport; + + /* We don't want to be interrupted every character. */ + parport_pc_disable_irq (port); + /* set nErrIntrEn and serviceIntr */ + frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2)); + + /* Forward mode. */ + parport_pc_data_forward (port); /* Must be in PS2 mode */ + + while (left) { + unsigned long expire = jiffies + port->physport->cad->timeout; + + size_t count = left; + + if (count > maxlen) + count = maxlen; + + if (!dma_handle) /* bounce buffer ! */ + memcpy(priv->dma_buf, buf, count); + + dmaflag = claim_dma_lock(); + disable_dma(port->dma); + clear_dma_ff(port->dma); + set_dma_mode(port->dma, DMA_MODE_WRITE); + set_dma_addr(port->dma, dma_addr); + set_dma_count(port->dma, count); + + /* Set DMA mode */ + frob_econtrol (port, 1<<3, 1<<3); + + /* Clear serviceIntr */ + frob_econtrol (port, 1<<2, 0); + + enable_dma(port->dma); + release_dma_lock(dmaflag); + + /* assume DMA will be successful */ + left -= count; + buf += count; + if (dma_handle) dma_addr += count; + + /* Wait for interrupt. */ + false_alarm: + ret = parport_wait_event (port, HZ); + if (ret < 0) break; + ret = 0; + if (!time_before (jiffies, expire)) { + /* Timed out. */ + printk (KERN_DEBUG "DMA write timed out\n"); + break; + } + /* Is serviceIntr set? */ + if (!(inb (ECONTROL (port)) & (1<<2))) { + cond_resched(); + + goto false_alarm; + } + + dmaflag = claim_dma_lock(); + disable_dma(port->dma); + clear_dma_ff(port->dma); + count = get_dma_residue(port->dma); + release_dma_lock(dmaflag); + + cond_resched(); /* Can't yield the port. */ + + /* Anyone else waiting for the port? */ + if (port->waithead) { + printk (KERN_DEBUG "Somebody wants the port\n"); + break; + } + + /* update for possible DMA residue ! */ + buf -= count; + left += count; + if (dma_handle) dma_addr -= count; + } + + /* Maybe got here through break, so adjust for DMA residue! */ + dmaflag = claim_dma_lock(); + disable_dma(port->dma); + clear_dma_ff(port->dma); + left += get_dma_residue(port->dma); + release_dma_lock(dmaflag); + + /* Turn off DMA mode */ + frob_econtrol (port, 1<<3, 0); + + if (dma_handle) + pci_unmap_single(priv->dev, dma_handle, length, PCI_DMA_TODEVICE); + +dump_parport_state ("leave fifo_write_block_dma", port); + return length - left; +} + +/* Parallel Port FIFO mode (ECP chipsets) */ +static size_t parport_pc_compat_write_block_pio (struct parport *port, + const void *buf, size_t length, + int flags) +{ + size_t written; + int r; + unsigned long expire; + const struct parport_pc_private *priv = port->physport->private_data; + + /* Special case: a timeout of zero means we cannot call schedule(). + * Also if O_NONBLOCK is set then use the default implementation. */ + if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK) + return parport_ieee1284_write_compat (port, buf, + length, flags); + + /* Set up parallel port FIFO mode.*/ + parport_pc_data_forward (port); /* Must be in PS2 mode */ + parport_pc_frob_control (port, PARPORT_CONTROL_STROBE, 0); + r = change_mode (port, ECR_PPF); /* Parallel port FIFO */ + if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", port->name); + + port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA; + + /* Write the data to the FIFO. */ + if (port->dma != PARPORT_DMA_NONE) + written = parport_pc_fifo_write_block_dma (port, buf, length); + else + written = parport_pc_fifo_write_block_pio (port, buf, length); + + /* Finish up. */ + /* For some hardware we don't want to touch the mode until + * the FIFO is empty, so allow 4 seconds for each position + * in the fifo. + */ + expire = jiffies + (priv->fifo_depth * HZ * 4); + do { + /* Wait for the FIFO to empty */ + r = change_mode (port, ECR_PS2); + if (r != -EBUSY) { + break; + } + } while (time_before (jiffies, expire)); + if (r == -EBUSY) { + + printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name); + + /* Prevent further data transfer. */ + frob_set_mode (port, ECR_TST); + + /* Adjust for the contents of the FIFO. */ + for (written -= priv->fifo_depth; ; written++) { + if (inb (ECONTROL (port)) & 0x2) { + /* Full up. */ + break; + } + outb (0, FIFO (port)); + } + + /* Reset the FIFO and return to PS2 mode. */ + frob_set_mode (port, ECR_PS2); + } + + r = parport_wait_peripheral (port, + PARPORT_STATUS_BUSY, + PARPORT_STATUS_BUSY); + if (r) + printk (KERN_DEBUG + "%s: BUSY timeout (%d) in compat_write_block_pio\n", + port->name, r); + + port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE; + + return written; +} + +/* ECP */ +#ifdef CONFIG_PARPORT_1284 +static size_t parport_pc_ecp_write_block_pio (struct parport *port, + const void *buf, size_t length, + int flags) +{ + size_t written; + int r; + unsigned long expire; + const struct parport_pc_private *priv = port->physport->private_data; + + /* Special case: a timeout of zero means we cannot call schedule(). + * Also if O_NONBLOCK is set then use the default implementation. */ + if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK) + return parport_ieee1284_ecp_write_data (port, buf, + length, flags); + + /* Switch to forward mode if necessary. */ + if (port->physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) { + /* Event 47: Set nInit high. */ + parport_frob_control (port, + PARPORT_CONTROL_INIT + | PARPORT_CONTROL_AUTOFD, + PARPORT_CONTROL_INIT + | PARPORT_CONTROL_AUTOFD); + + /* Event 49: PError goes high. */ + r = parport_wait_peripheral (port, + PARPORT_STATUS_PAPEROUT, + PARPORT_STATUS_PAPEROUT); + if (r) { + printk (KERN_DEBUG "%s: PError timeout (%d) " + "in ecp_write_block_pio\n", port->name, r); + } + } + + /* Set up ECP parallel port mode.*/ + parport_pc_data_forward (port); /* Must be in PS2 mode */ + parport_pc_frob_control (port, + PARPORT_CONTROL_STROBE | + PARPORT_CONTROL_AUTOFD, + 0); + r = change_mode (port, ECR_ECP); /* ECP FIFO */ + if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name); + port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA; + + /* Write the data to the FIFO. */ + if (port->dma != PARPORT_DMA_NONE) + written = parport_pc_fifo_write_block_dma (port, buf, length); + else + written = parport_pc_fifo_write_block_pio (port, buf, length); + + /* Finish up. */ + /* For some hardware we don't want to touch the mode until + * the FIFO is empty, so allow 4 seconds for each position + * in the fifo. + */ + expire = jiffies + (priv->fifo_depth * (HZ * 4)); + do { + /* Wait for the FIFO to empty */ + r = change_mode (port, ECR_PS2); + if (r != -EBUSY) { + break; + } + } while (time_before (jiffies, expire)); + if (r == -EBUSY) { + + printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name); + + /* Prevent further data transfer. */ + frob_set_mode (port, ECR_TST); + + /* Adjust for the contents of the FIFO. */ + for (written -= priv->fifo_depth; ; written++) { + if (inb (ECONTROL (port)) & 0x2) { + /* Full up. */ + break; + } + outb (0, FIFO (port)); + } + + /* Reset the FIFO and return to PS2 mode. */ + frob_set_mode (port, ECR_PS2); + + /* Host transfer recovery. */ + parport_pc_data_reverse (port); /* Must be in PS2 mode */ + udelay (5); + parport_frob_control (port, PARPORT_CONTROL_INIT, 0); + r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0); + if (r) + printk (KERN_DEBUG "%s: PE,1 timeout (%d) " + "in ecp_write_block_pio\n", port->name, r); + + parport_frob_control (port, + PARPORT_CONTROL_INIT, + PARPORT_CONTROL_INIT); + r = parport_wait_peripheral (port, + PARPORT_STATUS_PAPEROUT, + PARPORT_STATUS_PAPEROUT); + if (r) + printk (KERN_DEBUG "%s: PE,2 timeout (%d) " + "in ecp_write_block_pio\n", port->name, r); + } + + r = parport_wait_peripheral (port, + PARPORT_STATUS_BUSY, + PARPORT_STATUS_BUSY); + if(r) + printk (KERN_DEBUG + "%s: BUSY timeout (%d) in ecp_write_block_pio\n", + port->name, r); + + port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE; + + return written; +} + +#if 0 +static size_t parport_pc_ecp_read_block_pio (struct parport *port, + void *buf, size_t length, + int flags) +{ + size_t left = length; + size_t fifofull; + int r; + const int fifo = FIFO(port); + const struct parport_pc_private *priv = port->physport->private_data; + const int fifo_depth = priv->fifo_depth; + char *bufp = buf; + + port = port->physport; +DPRINTK (KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n"); +dump_parport_state ("enter fcn", port); + + /* Special case: a timeout of zero means we cannot call schedule(). + * Also if O_NONBLOCK is set then use the default implementation. */ + if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK) + return parport_ieee1284_ecp_read_data (port, buf, + length, flags); + + if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) { + /* If the peripheral is allowed to send RLE compressed + * data, it is possible for a byte to expand to 128 + * bytes in the FIFO. */ + fifofull = 128; + } else { + fifofull = fifo_depth; + } + + /* If the caller wants less than a full FIFO's worth of data, + * go through software emulation. Otherwise we may have to throw + * away data. */ + if (length < fifofull) + return parport_ieee1284_ecp_read_data (port, buf, + length, flags); + + if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) { + /* change to reverse-idle phase (must be in forward-idle) */ + + /* Event 38: Set nAutoFd low (also make sure nStrobe is high) */ + parport_frob_control (port, + PARPORT_CONTROL_AUTOFD + | PARPORT_CONTROL_STROBE, + PARPORT_CONTROL_AUTOFD); + parport_pc_data_reverse (port); /* Must be in PS2 mode */ + udelay (5); + /* Event 39: Set nInit low to initiate bus reversal */ + parport_frob_control (port, + PARPORT_CONTROL_INIT, + 0); + /* Event 40: Wait for nAckReverse (PError) to go low */ + r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0); + if (r) { + printk (KERN_DEBUG "%s: PE timeout Event 40 (%d) " + "in ecp_read_block_pio\n", port->name, r); + return 0; + } + } + + /* Set up ECP FIFO mode.*/ +/* parport_pc_frob_control (port, + PARPORT_CONTROL_STROBE | + PARPORT_CONTROL_AUTOFD, + PARPORT_CONTROL_AUTOFD); */ + r = change_mode (port, ECR_ECP); /* ECP FIFO */ + if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name); + + port->ieee1284.phase = IEEE1284_PH_REV_DATA; + + /* the first byte must be collected manually */ +dump_parport_state ("pre 43", port); + /* Event 43: Wait for nAck to go low */ + r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0); + if (r) { + /* timed out while reading -- no data */ + printk (KERN_DEBUG "PIO read timed out (initial byte)\n"); + goto out_no_data; + } + /* read byte */ + *bufp++ = inb (DATA (port)); + left--; +dump_parport_state ("43-44", port); + /* Event 44: nAutoFd (HostAck) goes high to acknowledge */ + parport_pc_frob_control (port, + PARPORT_CONTROL_AUTOFD, + 0); +dump_parport_state ("pre 45", port); + /* Event 45: Wait for nAck to go high */ +/* r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK); */ +dump_parport_state ("post 45", port); +r = 0; + if (r) { + /* timed out while waiting for peripheral to respond to ack */ + printk (KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n"); + + /* keep hold of the byte we've got already */ + goto out_no_data; + } + /* Event 46: nAutoFd (HostAck) goes low to accept more data */ + parport_pc_frob_control (port, + PARPORT_CONTROL_AUTOFD, + PARPORT_CONTROL_AUTOFD); + + +dump_parport_state ("rev idle", port); + /* Do the transfer. */ + while (left > fifofull) { + int ret; + unsigned long expire = jiffies + port->cad->timeout; + unsigned char ecrval = inb (ECONTROL (port)); + + if (need_resched() && time_before (jiffies, expire)) + /* Can't yield the port. */ + schedule (); + + /* At this point, the FIFO may already be full. In + * that case ECP is already holding back the + * peripheral (assuming proper design) with a delayed + * handshake. Work fast to avoid a peripheral + * timeout. */ + + if (ecrval & 0x01) { + /* FIFO is empty. Wait for interrupt. */ +dump_parport_state ("FIFO empty", port); + + /* Anyone else waiting for the port? */ + if (port->waithead) { + printk (KERN_DEBUG "Somebody wants the port\n"); + break; + } + + /* Clear serviceIntr */ + ECR_WRITE (port, ecrval & ~(1<<2)); + false_alarm: +dump_parport_state ("waiting", port); + ret = parport_wait_event (port, HZ); +DPRINTK (KERN_DEBUG "parport_wait_event returned %d\n", ret); + if (ret < 0) + break; + ret = 0; + if (!time_before (jiffies, expire)) { + /* Timed out. */ +dump_parport_state ("timeout", port); + printk (KERN_DEBUG "PIO read timed out\n"); + break; + } + ecrval = inb (ECONTROL (port)); + if (!(ecrval & (1<<2))) { + if (need_resched() && + time_before (jiffies, expire)) { + schedule (); + } + goto false_alarm; + } + + /* Depending on how the FIFO threshold was + * set, how long interrupt service took, and + * how fast the peripheral is, we might be + * lucky and have a just filled FIFO. */ + continue; + } + + if (ecrval & 0x02) { + /* FIFO is full. */ +dump_parport_state ("FIFO full", port); + insb (fifo, bufp, fifo_depth); + bufp += fifo_depth; + left -= fifo_depth; + continue; + } + +DPRINTK (KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n"); + + /* FIFO not filled. We will cycle this loop for a while + * and either the peripheral will fill it faster, + * tripping a fast empty with insb, or we empty it. */ + *bufp++ = inb (fifo); + left--; + } + + /* scoop up anything left in the FIFO */ + while (left && !(inb (ECONTROL (port) & 0x01))) { + *bufp++ = inb (fifo); + left--; + } + + port->ieee1284.phase = IEEE1284_PH_REV_IDLE; +dump_parport_state ("rev idle2", port); + +out_no_data: + + /* Go to forward idle mode to shut the peripheral up (event 47). */ + parport_frob_control (port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT); + + /* event 49: PError goes high */ + r = parport_wait_peripheral (port, + PARPORT_STATUS_PAPEROUT, + PARPORT_STATUS_PAPEROUT); + if (r) { + printk (KERN_DEBUG + "%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n", + port->name, r); + } + + port->ieee1284.phase = IEEE1284_PH_FWD_IDLE; + + /* Finish up. */ + { + int lost = get_fifo_residue (port); + if (lost) + /* Shouldn't happen with compliant peripherals. */ + printk (KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n", + port->name, lost); + } + +dump_parport_state ("fwd idle", port); + return length - left; +} +#endif /* 0 */ +#endif /* IEEE 1284 support */ +#endif /* Allowed to use FIFO/DMA */ + + +/* + * ****************************************** + * INITIALISATION AND MODULE STUFF BELOW HERE + * ****************************************** + */ + +/* GCC is not inlining extern inline function later overwriten to non-inline, + so we use outlined_ variants here. */ +static struct parport_operations parport_pc_ops = +{ + .write_data = parport_pc_write_data, + .read_data = parport_pc_read_data, + + .write_control = parport_pc_write_control, + .read_control = parport_pc_read_control, + .frob_control = parport_pc_frob_control, + + .read_status = parport_pc_read_status, + + .enable_irq = parport_pc_enable_irq, + .disable_irq = parport_pc_disable_irq, + + .data_forward = parport_pc_data_forward, + .data_reverse = parport_pc_data_reverse, + + .init_state = parport_pc_init_state, + .save_state = parport_pc_save_state, + .restore_state = parport_pc_restore_state, + + .epp_write_data = parport_ieee1284_epp_write_data, + .epp_read_data = parport_ieee1284_epp_read_data, + .epp_write_addr = parport_ieee1284_epp_write_addr, + .epp_read_addr = parport_ieee1284_epp_read_addr, + + .ecp_write_data = parport_ieee1284_ecp_write_data, + .ecp_read_data = parport_ieee1284_ecp_read_data, + .ecp_write_addr = parport_ieee1284_ecp_write_addr, + + .compat_write_data = parport_ieee1284_write_compat, + .nibble_read_data = parport_ieee1284_read_nibble, + .byte_read_data = parport_ieee1284_read_byte, + + .owner = THIS_MODULE, +}; + +#ifdef CONFIG_PARPORT_PC_SUPERIO +/* Super-IO chipset detection, Winbond, SMSC */ +static void __devinit show_parconfig_smsc37c669(int io, int key) +{ + int cr1,cr4,cra,cr23,cr26,cr27,i=0; + static const char *modes[]={ "SPP and Bidirectional (PS/2)", + "EPP and SPP", + "ECP", + "ECP and EPP" }; + + outb(key,io); + outb(key,io); + outb(1,io); + cr1=inb(io+1); + outb(4,io); + cr4=inb(io+1); + outb(0x0a,io); + cra=inb(io+1); + outb(0x23,io); + cr23=inb(io+1); + outb(0x26,io); + cr26=inb(io+1); + outb(0x27,io); + cr27=inb(io+1); + outb(0xaa,io); + + if (verbose_probing) { + printk (KERN_INFO "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, " + "A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n", + cr1,cr4,cra,cr23,cr26,cr27); + + /* The documentation calls DMA and IRQ-Lines by letters, so + the board maker can/will wire them + appropriately/randomly... G=reserved H=IDE-irq, */ + printk (KERN_INFO "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, " + "fifo threshold=%d\n", cr23*4, + (cr27 &0x0f) ? 'A'-1+(cr27 &0x0f): '-', + (cr26 &0x0f) ? 'A'-1+(cr26 &0x0f): '-', cra & 0x0f); + printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n", + (cr23*4 >=0x100) ?"yes":"no", (cr1 & 4) ? "yes" : "no"); + printk(KERN_INFO "SMSC LPT Config: Port mode=%s, EPP version =%s\n", + (cr1 & 0x08 ) ? "Standard mode only (SPP)" : modes[cr4 & 0x03], + (cr4 & 0x40) ? "1.7" : "1.9"); + } + + /* Heuristics ! BIOS setup for this mainboard device limits + the choices to standard settings, i.e. io-address and IRQ + are related, however DMA can be 1 or 3, assume DMA_A=DMA1, + DMA_C=DMA3 (this is true e.g. for TYAN 1564D Tomcat IV) */ + if(cr23*4 >=0x100) { /* if active */ + while((superios[i].io!= 0) && (i<NR_SUPERIOS)) + i++; + if(i==NR_SUPERIOS) + printk(KERN_INFO "Super-IO: too many chips!\n"); + else { + int d; + switch (cr23*4) { + case 0x3bc: + superios[i].io = 0x3bc; + superios[i].irq = 7; + break; + case 0x378: + superios[i].io = 0x378; + superios[i].irq = 7; + break; + case 0x278: + superios[i].io = 0x278; + superios[i].irq = 5; + } + d=(cr26 &0x0f); + if((d==1) || (d==3)) + superios[i].dma= d; + else + superios[i].dma= PARPORT_DMA_NONE; + } + } +} + + +static void __devinit show_parconfig_winbond(int io, int key) +{ + int cr30,cr60,cr61,cr70,cr74,crf0,i=0; + static const char *modes[] = { + "Standard (SPP) and Bidirectional(PS/2)", /* 0 */ + "EPP-1.9 and SPP", + "ECP", + "ECP and EPP-1.9", + "Standard (SPP)", + "EPP-1.7 and SPP", /* 5 */ + "undefined!", + "ECP and EPP-1.7" }; + static char *irqtypes[] = { "pulsed low, high-Z", "follows nACK" }; + + /* The registers are called compatible-PnP because the + register layout is modelled after ISA-PnP, the access + method is just another ... */ + outb(key,io); + outb(key,io); + outb(0x07,io); /* Register 7: Select Logical Device */ + outb(0x01,io+1); /* LD1 is Parallel Port */ + outb(0x30,io); + cr30=inb(io+1); + outb(0x60,io); + cr60=inb(io+1); + outb(0x61,io); + cr61=inb(io+1); + outb(0x70,io); + cr70=inb(io+1); + outb(0x74,io); + cr74=inb(io+1); + outb(0xf0,io); + crf0=inb(io+1); + outb(0xaa,io); + + if (verbose_probing) { + printk(KERN_INFO "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x " + "70=%02x 74=%02x, f0=%02x\n", cr30,cr60,cr61,cr70,cr74,crf0); + printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ", + (cr30 & 0x01) ? "yes":"no", cr60,cr61,cr70&0x0f ); + if ((cr74 & 0x07) > 3) + printk("dma=none\n"); + else + printk("dma=%d\n",cr74 & 0x07); + printk(KERN_INFO "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n", + irqtypes[crf0>>7], (crf0>>3)&0x0f); + printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", modes[crf0 & 0x07]); + } + + if(cr30 & 0x01) { /* the settings can be interrogated later ... */ + while((superios[i].io!= 0) && (i<NR_SUPERIOS)) + i++; + if(i==NR_SUPERIOS) + printk(KERN_INFO "Super-IO: too many chips!\n"); + else { + superios[i].io = (cr60<<8)|cr61; + superios[i].irq = cr70&0x0f; + superios[i].dma = (((cr74 & 0x07) > 3) ? + PARPORT_DMA_NONE : (cr74 & 0x07)); + } + } +} + +static void __devinit decode_winbond(int efer, int key, int devid, int devrev, int oldid) +{ + const char *type = "unknown"; + int id,progif=2; + + if (devid == devrev) + /* simple heuristics, we happened to read some + non-winbond register */ + return; + + id=(devid<<8) | devrev; + + /* Values are from public data sheets pdf files, I can just + confirm 83977TF is correct :-) */ + if (id == 0x9771) type="83977F/AF"; + else if (id == 0x9773) type="83977TF / SMSC 97w33x/97w34x"; + else if (id == 0x9774) type="83977ATF"; + else if ((id & ~0x0f) == 0x5270) type="83977CTF / SMSC 97w36x"; + else if ((id & ~0x0f) == 0x52f0) type="83977EF / SMSC 97w35x"; + else if ((id & ~0x0f) == 0x5210) type="83627"; + else if ((id & ~0x0f) == 0x6010) type="83697HF"; + else if ((oldid &0x0f ) == 0x0a) { type="83877F"; progif=1;} + else if ((oldid &0x0f ) == 0x0b) { type="83877AF"; progif=1;} + else if ((oldid &0x0f ) == 0x0c) { type="83877TF"; progif=1;} + else if ((oldid &0x0f ) == 0x0d) { type="83877ATF"; progif=1;} + else progif=0; + + if (verbose_probing) + printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x " + "devid=%02x devrev=%02x oldid=%02x type=%s\n", + efer, key, devid, devrev, oldid, type); + + if (progif == 2) + show_parconfig_winbond(efer,key); +} + +static void __devinit decode_smsc(int efer, int key, int devid, int devrev) +{ + const char *type = "unknown"; + void (*func)(int io, int key); + int id; + + if (devid == devrev) + /* simple heuristics, we happened to read some + non-smsc register */ + return; + + func=NULL; + id=(devid<<8) | devrev; + + if (id==0x0302) {type="37c669"; func=show_parconfig_smsc37c669;} + else if (id==0x6582) type="37c665IR"; + else if (devid==0x65) type="37c665GT"; + else if (devid==0x66) type="37c666GT"; + + if (verbose_probing) + printk(KERN_INFO "SMSC chip at EFER=0x%x " + "key=0x%02x devid=%02x devrev=%02x type=%s\n", + efer, key, devid, devrev, type); + + if (func) + func(efer,key); +} + + +static void __devinit winbond_check(int io, int key) +{ + int devid,devrev,oldid,x_devid,x_devrev,x_oldid; + + if (!request_region(io, 3, __FUNCTION__)) + return; + + /* First probe without key */ + outb(0x20,io); + x_devid=inb(io+1); + outb(0x21,io); + x_devrev=inb(io+1); + outb(0x09,io); + x_oldid=inb(io+1); + + outb(key,io); + outb(key,io); /* Write Magic Sequence to EFER, extended + funtion enable register */ + outb(0x20,io); /* Write EFIR, extended function index register */ + devid=inb(io+1); /* Read EFDR, extended function data register */ + outb(0x21,io); + devrev=inb(io+1); + outb(0x09,io); + oldid=inb(io+1); + outb(0xaa,io); /* Magic Seal */ + + if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid)) + goto out; /* protection against false positives */ + + decode_winbond(io,key,devid,devrev,oldid); +out: + release_region(io, 3); +} + +static void __devinit winbond_check2(int io,int key) +{ + int devid,devrev,oldid,x_devid,x_devrev,x_oldid; + + if (!request_region(io, 3, __FUNCTION__)) + return; + + /* First probe without the key */ + outb(0x20,io+2); + x_devid=inb(io+2); + outb(0x21,io+1); + x_devrev=inb(io+2); + outb(0x09,io+1); + x_oldid=inb(io+2); + + outb(key,io); /* Write Magic Byte to EFER, extended + funtion enable register */ + outb(0x20,io+2); /* Write EFIR, extended function index register */ + devid=inb(io+2); /* Read EFDR, extended function data register */ + outb(0x21,io+1); + devrev=inb(io+2); + outb(0x09,io+1); + oldid=inb(io+2); + outb(0xaa,io); /* Magic Seal */ + + if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid)) + goto out; /* protection against false positives */ + + decode_winbond(io,key,devid,devrev,oldid); +out: + release_region(io, 3); +} + +static void __devinit smsc_check(int io, int key) +{ + int id,rev,oldid,oldrev,x_id,x_rev,x_oldid,x_oldrev; + + if (!request_region(io, 3, __FUNCTION__)) + return; + + /* First probe without the key */ + outb(0x0d,io); + x_oldid=inb(io+1); + outb(0x0e,io); + x_oldrev=inb(io+1); + outb(0x20,io); + x_id=inb(io+1); + outb(0x21,io); + x_rev=inb(io+1); + + outb(key,io); + outb(key,io); /* Write Magic Sequence to EFER, extended + funtion enable register */ + outb(0x0d,io); /* Write EFIR, extended function index register */ + oldid=inb(io+1); /* Read EFDR, extended function data register */ + outb(0x0e,io); + oldrev=inb(io+1); + outb(0x20,io); + id=inb(io+1); + outb(0x21,io); + rev=inb(io+1); + outb(0xaa,io); /* Magic Seal */ + + if ((x_id == id) && (x_oldrev == oldrev) && + (x_oldid == oldid) && (x_rev == rev)) + goto out; /* protection against false positives */ + + decode_smsc(io,key,oldid,oldrev); +out: + release_region(io, 3); +} + + +static void __devinit detect_and_report_winbond (void) +{ + if (verbose_probing) + printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n"); + winbond_check(0x3f0,0x87); + winbond_check(0x370,0x87); + winbond_check(0x2e ,0x87); + winbond_check(0x4e ,0x87); + winbond_check(0x3f0,0x86); + winbond_check2(0x250,0x88); + winbond_check2(0x250,0x89); +} + +static void __devinit detect_and_report_smsc (void) +{ + if (verbose_probing) + printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n"); + smsc_check(0x3f0,0x55); + smsc_check(0x370,0x55); + smsc_check(0x3f0,0x44); + smsc_check(0x370,0x44); +} +#endif /* CONFIG_PARPORT_PC_SUPERIO */ + +static int __devinit get_superio_dma (struct parport *p) +{ + int i=0; + while( (superios[i].io != p->base) && (i<NR_SUPERIOS)) + i++; + if (i!=NR_SUPERIOS) + return superios[i].dma; + return PARPORT_DMA_NONE; +} + +static int __devinit get_superio_irq (struct parport *p) +{ + int i=0; + while( (superios[i].io != p->base) && (i<NR_SUPERIOS)) + i++; + if (i!=NR_SUPERIOS) + return superios[i].irq; + return PARPORT_IRQ_NONE; +} + + +/* --- Mode detection ------------------------------------- */ + +/* + * Checks for port existence, all ports support SPP MODE + * Returns: + * 0 : No parallel port at this address + * PARPORT_MODE_PCSPP : SPP port detected + * (if the user specified an ioport himself, + * this shall always be the case!) + * + */ +static int __devinit parport_SPP_supported(struct parport *pb) +{ + unsigned char r, w; + + /* + * first clear an eventually pending EPP timeout + * I (sailer@ife.ee.ethz.ch) have an SMSC chipset + * that does not even respond to SPP cycles if an EPP + * timeout is pending + */ + clear_epp_timeout(pb); + + /* Do a simple read-write test to make sure the port exists. */ + w = 0xc; + outb (w, CONTROL (pb)); + + /* Is there a control register that we can read from? Some + * ports don't allow reads, so read_control just returns a + * software copy. Some ports _do_ allow reads, so bypass the + * software copy here. In addition, some bits aren't + * writable. */ + r = inb (CONTROL (pb)); + if ((r & 0xf) == w) { + w = 0xe; + outb (w, CONTROL (pb)); + r = inb (CONTROL (pb)); + outb (0xc, CONTROL (pb)); + if ((r & 0xf) == w) + return PARPORT_MODE_PCSPP; + } + + if (user_specified) + /* That didn't work, but the user thinks there's a + * port here. */ + printk (KERN_INFO "parport 0x%lx (WARNING): CTR: " + "wrote 0x%02x, read 0x%02x\n", pb->base, w, r); + + /* Try the data register. The data lines aren't tri-stated at + * this stage, so we expect back what we wrote. */ + w = 0xaa; + parport_pc_write_data (pb, w); + r = parport_pc_read_data (pb); + if (r == w) { + w = 0x55; + parport_pc_write_data (pb, w); + r = parport_pc_read_data (pb); + if (r == w) + return PARPORT_MODE_PCSPP; + } + + if (user_specified) { + /* Didn't work, but the user is convinced this is the + * place. */ + printk (KERN_INFO "parport 0x%lx (WARNING): DATA: " + "wrote 0x%02x, read 0x%02x\n", pb->base, w, r); + printk (KERN_INFO "parport 0x%lx: You gave this address, " + "but there is probably no parallel port there!\n", + pb->base); + } + + /* It's possible that we can't read the control register or + * the data register. In that case just believe the user. */ + if (user_specified) + return PARPORT_MODE_PCSPP; + + return 0; +} + +/* Check for ECR + * + * Old style XT ports alias io ports every 0x400, hence accessing ECR + * on these cards actually accesses the CTR. + * + * Modern cards don't do this but reading from ECR will return 0xff + * regardless of what is written here if the card does NOT support + * ECP. + * + * We first check to see if ECR is the same as CTR. If not, the low + * two bits of ECR aren't writable, so we check by writing ECR and + * reading it back to see if it's what we expect. + */ +static int __devinit parport_ECR_present(struct parport *pb) +{ + struct parport_pc_private *priv = pb->private_data; + unsigned char r = 0xc; + + outb (r, CONTROL (pb)); + if ((inb (ECONTROL (pb)) & 0x3) == (r & 0x3)) { + outb (r ^ 0x2, CONTROL (pb)); /* Toggle bit 1 */ + + r = inb (CONTROL (pb)); + if ((inb (ECONTROL (pb)) & 0x2) == (r & 0x2)) + goto no_reg; /* Sure that no ECR register exists */ + } + + if ((inb (ECONTROL (pb)) & 0x3 ) != 0x1) + goto no_reg; + + ECR_WRITE (pb, 0x34); + if (inb (ECONTROL (pb)) != 0x35) + goto no_reg; + + priv->ecr = 1; + outb (0xc, CONTROL (pb)); + + /* Go to mode 000 */ + frob_set_mode (pb, ECR_SPP); + + return 1; + + no_reg: + outb (0xc, CONTROL (pb)); + return 0; +} + +#ifdef CONFIG_PARPORT_1284 +/* Detect PS/2 support. + * + * Bit 5 (0x20) sets the PS/2 data direction; setting this high + * allows us to read data from the data lines. In theory we would get back + * 0xff but any peripheral attached to the port may drag some or all of the + * lines down to zero. So if we get back anything that isn't the contents + * of the data register we deem PS/2 support to be present. + * + * Some SPP ports have "half PS/2" ability - you can't turn off the line + * drivers, but an external peripheral with sufficiently beefy drivers of + * its own can overpower them and assert its own levels onto the bus, from + * where they can then be read back as normal. Ports with this property + * and the right type of device attached are likely to fail the SPP test, + * (as they will appear to have stuck bits) and so the fact that they might + * be misdetected here is rather academic. + */ + +static int __devinit parport_PS2_supported(struct parport *pb) +{ + int ok = 0; + + clear_epp_timeout(pb); + + /* try to tri-state the buffer */ + parport_pc_data_reverse (pb); + + parport_pc_write_data(pb, 0x55); + if (parport_pc_read_data(pb) != 0x55) ok++; + + parport_pc_write_data(pb, 0xaa); + if (parport_pc_read_data(pb) != 0xaa) ok++; + + /* cancel input mode */ + parport_pc_data_forward (pb); + + if (ok) { + pb->modes |= PARPORT_MODE_TRISTATE; + } else { + struct parport_pc_private *priv = pb->private_data; + priv->ctr_writable &= ~0x20; + } + + return ok; +} + +#ifdef CONFIG_PARPORT_PC_FIFO +static int __devinit parport_ECP_supported(struct parport *pb) +{ + int i; + int config, configb; + int pword; + struct parport_pc_private *priv = pb->private_data; + /* Translate ECP intrLine to ISA irq value */ + static const int intrline[]= { 0, 7, 9, 10, 11, 14, 15, 5 }; + + /* If there is no ECR, we have no hope of supporting ECP. */ + if (!priv->ecr) + return 0; + + /* Find out FIFO depth */ + ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */ + ECR_WRITE (pb, ECR_TST << 5); /* TEST FIFO */ + for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02); i++) + outb (0xaa, FIFO (pb)); + + /* + * Using LGS chipset it uses ECR register, but + * it doesn't support ECP or FIFO MODE + */ + if (i == 1024) { + ECR_WRITE (pb, ECR_SPP << 5); + return 0; + } + + priv->fifo_depth = i; + if (verbose_probing) + printk (KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i); + + /* Find out writeIntrThreshold */ + frob_econtrol (pb, 1<<2, 1<<2); + frob_econtrol (pb, 1<<2, 0); + for (i = 1; i <= priv->fifo_depth; i++) { + inb (FIFO (pb)); + udelay (50); + if (inb (ECONTROL (pb)) & (1<<2)) + break; + } + + if (i <= priv->fifo_depth) { + if (verbose_probing) + printk (KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n", + pb->base, i); + } else + /* Number of bytes we know we can write if we get an + interrupt. */ + i = 0; + + priv->writeIntrThreshold = i; + + /* Find out readIntrThreshold */ + frob_set_mode (pb, ECR_PS2); /* Reset FIFO and enable PS2 */ + parport_pc_data_reverse (pb); /* Must be in PS2 mode */ + frob_set_mode (pb, ECR_TST); /* Test FIFO */ + frob_econtrol (pb, 1<<2, 1<<2); + frob_econtrol (pb, 1<<2, 0); + for (i = 1; i <= priv->fifo_depth; i++) { + outb (0xaa, FIFO (pb)); + if (inb (ECONTROL (pb)) & (1<<2)) + break; + } + + if (i <= priv->fifo_depth) { + if (verbose_probing) + printk (KERN_INFO "0x%lx: readIntrThreshold is %d\n", + pb->base, i); + } else + /* Number of bytes we can read if we get an interrupt. */ + i = 0; + + priv->readIntrThreshold = i; + + ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */ + ECR_WRITE (pb, 0xf4); /* Configuration mode */ + config = inb (CONFIGA (pb)); + pword = (config >> 4) & 0x7; + switch (pword) { + case 0: + pword = 2; + printk (KERN_WARNING "0x%lx: Unsupported pword size!\n", + pb->base); + break; + case 2: + pword = 4; + printk (KERN_WARNING "0x%lx: Unsupported pword size!\n", + pb->base); + break; + default: + printk (KERN_WARNING "0x%lx: Unknown implementation ID\n", + pb->base); + /* Assume 1 */ + case 1: + pword = 1; + } + priv->pword = pword; + + if (verbose_probing) { + printk (KERN_DEBUG "0x%lx: PWord is %d bits\n", pb->base, 8 * pword); + + printk (KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base, + config & 0x80 ? "Level" : "Pulses"); + + configb = inb (CONFIGB (pb)); + printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n", + pb->base, config, configb); + printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base); + if ((configb >>3) & 0x07) + printk("%d",intrline[(configb >>3) & 0x07]); + else + printk("<none or set by other means>"); + printk (" dma="); + if( (configb & 0x03 ) == 0x00) + printk("<none or set by other means>\n"); + else + printk("%d\n",configb & 0x07); + } + + /* Go back to mode 000 */ + frob_set_mode (pb, ECR_SPP); + + return 1; +} +#endif + +static int __devinit parport_ECPPS2_supported(struct parport *pb) +{ + const struct parport_pc_private *priv = pb->private_data; + int result; + unsigned char oecr; + + if (!priv->ecr) + return 0; + + oecr = inb (ECONTROL (pb)); + ECR_WRITE (pb, ECR_PS2 << 5); + result = parport_PS2_supported(pb); + ECR_WRITE (pb, oecr); + return result; +} + +/* EPP mode detection */ + +static int __devinit parport_EPP_supported(struct parport *pb) +{ + const struct parport_pc_private *priv = pb->private_data; + + /* + * Theory: + * Bit 0 of STR is the EPP timeout bit, this bit is 0 + * when EPP is possible and is set high when an EPP timeout + * occurs (EPP uses the HALT line to stop the CPU while it does + * the byte transfer, an EPP timeout occurs if the attached + * device fails to respond after 10 micro seconds). + * + * This bit is cleared by either reading it (National Semi) + * or writing a 1 to the bit (SMC, UMC, WinBond), others ??? + * This bit is always high in non EPP modes. + */ + + /* If EPP timeout bit clear then EPP available */ + if (!clear_epp_timeout(pb)) { + return 0; /* No way to clear timeout */ + } + + /* Check for Intel bug. */ + if (priv->ecr) { + unsigned char i; + for (i = 0x00; i < 0x80; i += 0x20) { + ECR_WRITE (pb, i); + if (clear_epp_timeout (pb)) { + /* Phony EPP in ECP. */ + return 0; + } + } + } + + pb->modes |= PARPORT_MODE_EPP; + + /* Set up access functions to use EPP hardware. */ + pb->ops->epp_read_data = parport_pc_epp_read_data; + pb->ops->epp_write_data = parport_pc_epp_write_data; + pb->ops->epp_read_addr = parport_pc_epp_read_addr; + pb->ops->epp_write_addr = parport_pc_epp_write_addr; + + return 1; +} + +static int __devinit parport_ECPEPP_supported(struct parport *pb) +{ + struct parport_pc_private *priv = pb->private_data; + int result; + unsigned char oecr; + + if (!priv->ecr) { + return 0; + } + + oecr = inb (ECONTROL (pb)); + /* Search for SMC style EPP+ECP mode */ + ECR_WRITE (pb, 0x80); + outb (0x04, CONTROL (pb)); + result = parport_EPP_supported(pb); + + ECR_WRITE (pb, oecr); + + if (result) { + /* Set up access functions to use ECP+EPP hardware. */ + pb->ops->epp_read_data = parport_pc_ecpepp_read_data; + pb->ops->epp_write_data = parport_pc_ecpepp_write_data; + pb->ops->epp_read_addr = parport_pc_ecpepp_read_addr; + pb->ops->epp_write_addr = parport_pc_ecpepp_write_addr; + } + + return result; +} + +#else /* No IEEE 1284 support */ + +/* Don't bother probing for modes we know we won't use. */ +static int __devinit parport_PS2_supported(struct parport *pb) { return 0; } +#ifdef CONFIG_PARPORT_PC_FIFO +static int __devinit parport_ECP_supported(struct parport *pb) { return 0; } +#endif +static int __devinit parport_EPP_supported(struct parport *pb) { return 0; } +static int __devinit parport_ECPEPP_supported(struct parport *pb){return 0;} +static int __devinit parport_ECPPS2_supported(struct parport *pb){return 0;} + +#endif /* No IEEE 1284 support */ + +/* --- IRQ detection -------------------------------------- */ + +/* Only if supports ECP mode */ +static int __devinit programmable_irq_support(struct parport *pb) +{ + int irq, intrLine; + unsigned char oecr = inb (ECONTROL (pb)); + static const int lookup[8] = { + PARPORT_IRQ_NONE, 7, 9, 10, 11, 14, 15, 5 + }; + + ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */ + + intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07; + irq = lookup[intrLine]; + + ECR_WRITE (pb, oecr); + return irq; +} + +static int __devinit irq_probe_ECP(struct parport *pb) +{ + int i; + unsigned long irqs; + + irqs = probe_irq_on(); + + ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */ + ECR_WRITE (pb, (ECR_TST << 5) | 0x04); + ECR_WRITE (pb, ECR_TST << 5); + + /* If Full FIFO sure that writeIntrThreshold is generated */ + for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02) ; i++) + outb (0xaa, FIFO (pb)); + + pb->irq = probe_irq_off(irqs); + ECR_WRITE (pb, ECR_SPP << 5); + + if (pb->irq <= 0) + pb->irq = PARPORT_IRQ_NONE; + + return pb->irq; +} + +/* + * This detection seems that only works in National Semiconductors + * This doesn't work in SMC, LGS, and Winbond + */ +static int __devinit irq_probe_EPP(struct parport *pb) +{ +#ifndef ADVANCED_DETECT + return PARPORT_IRQ_NONE; +#else + int irqs; + unsigned char oecr; + + if (pb->modes & PARPORT_MODE_PCECR) + oecr = inb (ECONTROL (pb)); + + irqs = probe_irq_on(); + + if (pb->modes & PARPORT_MODE_PCECR) + frob_econtrol (pb, 0x10, 0x10); + + clear_epp_timeout(pb); + parport_pc_frob_control (pb, 0x20, 0x20); + parport_pc_frob_control (pb, 0x10, 0x10); + clear_epp_timeout(pb); + + /* Device isn't expecting an EPP read + * and generates an IRQ. + */ + parport_pc_read_epp(pb); + udelay(20); + + pb->irq = probe_irq_off (irqs); + if (pb->modes & PARPORT_MODE_PCECR) + ECR_WRITE (pb, oecr); + parport_pc_write_control(pb, 0xc); + + if (pb->irq <= 0) + pb->irq = PARPORT_IRQ_NONE; + + return pb->irq; +#endif /* Advanced detection */ +} + +static int __devinit irq_probe_SPP(struct parport *pb) +{ + /* Don't even try to do this. */ + return PARPORT_IRQ_NONE; +} + +/* We will attempt to share interrupt requests since other devices + * such as sound cards and network cards seem to like using the + * printer IRQs. + * + * When ECP is available we can autoprobe for IRQs. + * NOTE: If we can autoprobe it, we can register the IRQ. + */ +static int __devinit parport_irq_probe(struct parport *pb) +{ + struct parport_pc_private *priv = pb->private_data; + + if (priv->ecr) { + pb->irq = programmable_irq_support(pb); + + if (pb->irq == PARPORT_IRQ_NONE) + pb->irq = irq_probe_ECP(pb); + } + + if ((pb->irq == PARPORT_IRQ_NONE) && priv->ecr && + (pb->modes & PARPORT_MODE_EPP)) + pb->irq = irq_probe_EPP(pb); + + clear_epp_timeout(pb); + + if (pb->irq == PARPORT_IRQ_NONE && (pb->modes & PARPORT_MODE_EPP)) + pb->irq = irq_probe_EPP(pb); + + clear_epp_timeout(pb); + + if (pb->irq == PARPORT_IRQ_NONE) + pb->irq = irq_probe_SPP(pb); + + if (pb->irq == PARPORT_IRQ_NONE) + pb->irq = get_superio_irq(pb); + + return pb->irq; +} + +/* --- DMA detection -------------------------------------- */ + +/* Only if chipset conforms to ECP ISA Interface Standard */ +static int __devinit programmable_dma_support (struct parport *p) +{ + unsigned char oecr = inb (ECONTROL (p)); + int dma; + + frob_set_mode (p, ECR_CNF); + + dma = inb (CONFIGB(p)) & 0x07; + /* 000: Indicates jumpered 8-bit DMA if read-only. + 100: Indicates jumpered 16-bit DMA if read-only. */ + if ((dma & 0x03) == 0) + dma = PARPORT_DMA_NONE; + + ECR_WRITE (p, oecr); + return dma; +} + +static int __devinit parport_dma_probe (struct parport *p) +{ + const struct parport_pc_private *priv = p->private_data; + if (priv->ecr) + p->dma = programmable_dma_support(p); /* ask ECP chipset first */ + if (p->dma == PARPORT_DMA_NONE) { + /* ask known Super-IO chips proper, although these + claim ECP compatible, some don't report their DMA + conforming to ECP standards */ + p->dma = get_superio_dma(p); + } + + return p->dma; +} + +/* --- Initialisation code -------------------------------- */ + +static LIST_HEAD(ports_list); +static DEFINE_SPINLOCK(ports_lock); + +struct parport *parport_pc_probe_port (unsigned long int base, + unsigned long int base_hi, + int irq, int dma, + struct pci_dev *dev) +{ + struct parport_pc_private *priv; + struct parport_operations *ops; + struct parport *p; + int probedirq = PARPORT_IRQ_NONE; + struct resource *base_res; + struct resource *ECR_res = NULL; + struct resource *EPP_res = NULL; + + ops = kmalloc(sizeof (struct parport_operations), GFP_KERNEL); + if (!ops) + goto out1; + + priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL); + if (!priv) + goto out2; + + /* a misnomer, actually - it's allocate and reserve parport number */ + p = parport_register_port(base, irq, dma, ops); + if (!p) + goto out3; + + base_res = request_region(base, 3, p->name); + if (!base_res) + goto out4; + + memcpy(ops, &parport_pc_ops, sizeof (struct parport_operations)); + priv->ctr = 0xc; + priv->ctr_writable = ~0x10; + priv->ecr = 0; + priv->fifo_depth = 0; + priv->dma_buf = NULL; + priv->dma_handle = 0; + priv->dev = dev; + INIT_LIST_HEAD(&priv->list); + priv->port = p; + p->base_hi = base_hi; + p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT; + p->private_data = priv; + + if (base_hi) { + ECR_res = request_region(base_hi, 3, p->name); + if (ECR_res) + parport_ECR_present(p); + } + + if (base != 0x3bc) { + EPP_res = request_region(base+0x3, 5, p->name); + if (EPP_res) + if (!parport_EPP_supported(p)) + parport_ECPEPP_supported(p); + } + if (!parport_SPP_supported (p)) + /* No port. */ + goto out5; + if (priv->ecr) + parport_ECPPS2_supported(p); + else + parport_PS2_supported(p); + + p->size = (p->modes & PARPORT_MODE_EPP)?8:3; + + printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base); + if (p->base_hi && priv->ecr) + printk(" (0x%lx)", p->base_hi); + if (p->irq == PARPORT_IRQ_AUTO) { + p->irq = PARPORT_IRQ_NONE; + parport_irq_probe(p); + } else if (p->irq == PARPORT_IRQ_PROBEONLY) { + p->irq = PARPORT_IRQ_NONE; + parport_irq_probe(p); + probedirq = p->irq; + p->irq = PARPORT_IRQ_NONE; + } + if (p->irq != PARPORT_IRQ_NONE) { + printk(", irq %d", p->irq); + priv->ctr_writable |= 0x10; + + if (p->dma == PARPORT_DMA_AUTO) { + p->dma = PARPORT_DMA_NONE; + parport_dma_probe(p); + } + } + if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq + is mandatory (see above) */ + p->dma = PARPORT_DMA_NONE; + +#ifdef CONFIG_PARPORT_PC_FIFO + if (parport_ECP_supported(p) && + p->dma != PARPORT_DMA_NOFIFO && + priv->fifo_depth > 0 && p->irq != PARPORT_IRQ_NONE) { + p->modes |= PARPORT_MODE_ECP | PARPORT_MODE_COMPAT; + p->ops->compat_write_data = parport_pc_compat_write_block_pio; +#ifdef CONFIG_PARPORT_1284 + p->ops->ecp_write_data = parport_pc_ecp_write_block_pio; + /* currently broken, but working on it.. (FB) */ + /* p->ops->ecp_read_data = parport_pc_ecp_read_block_pio; */ +#endif /* IEEE 1284 support */ + if (p->dma != PARPORT_DMA_NONE) { + printk(", dma %d", p->dma); + p->modes |= PARPORT_MODE_DMA; + } + else printk(", using FIFO"); + } + else + /* We can't use the DMA channel after all. */ + p->dma = PARPORT_DMA_NONE; +#endif /* Allowed to use FIFO/DMA */ + + printk(" ["); +#define printmode(x) {if(p->modes&PARPORT_MODE_##x){printk("%s%s",f?",":"",#x);f++;}} + { + int f = 0; + printmode(PCSPP); + printmode(TRISTATE); + printmode(COMPAT) + printmode(EPP); + printmode(ECP); + printmode(DMA); + } +#undef printmode +#ifndef CONFIG_PARPORT_1284 + printk ("(,...)"); +#endif /* CONFIG_PARPORT_1284 */ + printk("]\n"); + if (probedirq != PARPORT_IRQ_NONE) + printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq); + + /* If No ECP release the ports grabbed above. */ + if (ECR_res && (p->modes & PARPORT_MODE_ECP) == 0) { + release_region(base_hi, 3); + ECR_res = NULL; + } + /* Likewise for EEP ports */ + if (EPP_res && (p->modes & PARPORT_MODE_EPP) == 0) { + release_region(base+3, 5); + EPP_res = NULL; + } + if (p->irq != PARPORT_IRQ_NONE) { + if (request_irq (p->irq, parport_pc_interrupt, + 0, p->name, p)) { + printk (KERN_WARNING "%s: irq %d in use, " + "resorting to polled operation\n", + p->name, p->irq); + p->irq = PARPORT_IRQ_NONE; + p->dma = PARPORT_DMA_NONE; + } + +#ifdef CONFIG_PARPORT_PC_FIFO + if (p->dma != PARPORT_DMA_NONE) { + if (request_dma (p->dma, p->name)) { + printk (KERN_WARNING "%s: dma %d in use, " + "resorting to PIO operation\n", + p->name, p->dma); + p->dma = PARPORT_DMA_NONE; + } else { + priv->dma_buf = + pci_alloc_consistent(priv->dev, + PAGE_SIZE, + &priv->dma_handle); + if (! priv->dma_buf) { + printk (KERN_WARNING "%s: " + "cannot get buffer for DMA, " + "resorting to PIO operation\n", + p->name); + free_dma(p->dma); + p->dma = PARPORT_DMA_NONE; + } + } + } +#endif /* CONFIG_PARPORT_PC_FIFO */ + } + + /* Done probing. Now put the port into a sensible start-up state. */ + if (priv->ecr) + /* + * Put the ECP detected port in PS2 mode. + * Do this also for ports that have ECR but don't do ECP. + */ + ECR_WRITE (p, 0x34); + + parport_pc_write_data(p, 0); + parport_pc_data_forward (p); + + /* Now that we've told the sharing engine about the port, and + found out its characteristics, let the high-level drivers + know about it. */ + spin_lock(&ports_lock); + list_add(&priv->list, &ports_list); + spin_unlock(&ports_lock); + parport_announce_port (p); + + return p; + +out5: + if (ECR_res) + release_region(base_hi, 3); + if (EPP_res) + release_region(base+0x3, 5); + release_region(base, 3); +out4: + parport_put_port(p); +out3: + kfree (priv); +out2: + kfree (ops); +out1: + return NULL; +} + +EXPORT_SYMBOL (parport_pc_probe_port); + +void parport_pc_unregister_port (struct parport *p) +{ + struct parport_pc_private *priv = p->private_data; + struct parport_operations *ops = p->ops; + + parport_remove_port(p); + spin_lock(&ports_lock); + list_del_init(&priv->list); + spin_unlock(&ports_lock); + if (p->dma != PARPORT_DMA_NONE) + free_dma(p->dma); + if (p->irq != PARPORT_IRQ_NONE) + free_irq(p->irq, p); + release_region(p->base, 3); + if (p->size > 3) + release_region(p->base + 3, p->size - 3); + if (p->modes & PARPORT_MODE_ECP) + release_region(p->base_hi, 3); +#ifdef CONFIG_PARPORT_PC_FIFO + if (priv->dma_buf) + pci_free_consistent(priv->dev, PAGE_SIZE, + priv->dma_buf, + priv->dma_handle); +#endif /* CONFIG_PARPORT_PC_FIFO */ + kfree (p->private_data); + parport_put_port(p); + kfree (ops); /* hope no-one cached it */ +} + +EXPORT_SYMBOL (parport_pc_unregister_port); + +#ifdef CONFIG_PCI + +/* ITE support maintained by Rich Liu <richliu@poorman.org> */ +static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq, + int autodma, struct parport_pc_via_data *via) +{ + short inta_addr[6] = { 0x2A0, 0x2C0, 0x220, 0x240, 0x1E0 }; + struct resource *base_res; + u32 ite8872set; + u32 ite8872_lpt, ite8872_lpthi; + u8 ite8872_irq, type; + char *fake_name = "parport probe"; + int irq; + int i; + + DPRINTK (KERN_DEBUG "sio_ite_8872_probe()\n"); + + // make sure which one chip + for(i = 0; i < 5; i++) { + base_res = request_region(inta_addr[i], 0x8, fake_name); + if (base_res) { + int test; + pci_write_config_dword (pdev, 0x60, + 0xe7000000 | inta_addr[i]); + pci_write_config_dword (pdev, 0x78, + 0x00000000 | inta_addr[i]); + test = inb (inta_addr[i]); + if (test != 0xff) break; + release_region(inta_addr[i], 0x8); + } + } + if(i >= 5) { + printk (KERN_INFO "parport_pc: cannot find ITE8872 INTA\n"); + return 0; + } + + type = inb (inta_addr[i] + 0x18); + type &= 0x0f; + + switch (type) { + case 0x2: + printk (KERN_INFO "parport_pc: ITE8871 found (1P)\n"); + ite8872set = 0x64200000; + break; + case 0xa: + printk (KERN_INFO "parport_pc: ITE8875 found (1P)\n"); + ite8872set = 0x64200000; + break; + case 0xe: + printk (KERN_INFO "parport_pc: ITE8872 found (2S1P)\n"); + ite8872set = 0x64e00000; + break; + case 0x6: + printk (KERN_INFO "parport_pc: ITE8873 found (1S)\n"); + return 0; + case 0x8: + DPRINTK (KERN_DEBUG "parport_pc: ITE8874 found (2S)\n"); + return 0; + default: + printk (KERN_INFO "parport_pc: unknown ITE887x\n"); + printk (KERN_INFO "parport_pc: please mail 'lspci -nvv' " + "output to Rich.Liu@ite.com.tw\n"); + return 0; + } + + pci_read_config_byte (pdev, 0x3c, &ite8872_irq); + pci_read_config_dword (pdev, 0x1c, &ite8872_lpt); + ite8872_lpt &= 0x0000ff00; + pci_read_config_dword (pdev, 0x20, &ite8872_lpthi); + ite8872_lpthi &= 0x0000ff00; + pci_write_config_dword (pdev, 0x6c, 0xe3000000 | ite8872_lpt); + pci_write_config_dword (pdev, 0x70, 0xe3000000 | ite8872_lpthi); + pci_write_config_dword (pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt); + // SET SPP&EPP , Parallel Port NO DMA , Enable All Function + // SET Parallel IRQ + pci_write_config_dword (pdev, 0x9c, + ite8872set | (ite8872_irq * 0x11111)); + + DPRINTK (KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq); + DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n", + ite8872_lpt); + DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n", + ite8872_lpthi); + + /* Let the user (or defaults) steer us away from interrupts */ + irq = ite8872_irq; + if (autoirq != PARPORT_IRQ_AUTO) + irq = PARPORT_IRQ_NONE; + + /* + * Release the resource so that parport_pc_probe_port can get it. + */ + release_resource(base_res); + if (parport_pc_probe_port (ite8872_lpt, ite8872_lpthi, + irq, PARPORT_DMA_NONE, NULL)) { + printk (KERN_INFO + "parport_pc: ITE 8872 parallel port: io=0x%X", + ite8872_lpt); + if (irq != PARPORT_IRQ_NONE) + printk (", irq=%d", irq); + printk ("\n"); + return 1; + } + + return 0; +} + +/* VIA 8231 support by Pavel Fedin <sonic_amiga@rambler.ru> + based on VIA 686a support code by Jeff Garzik <jgarzik@pobox.com> */ +static int __devinitdata parport_init_mode = 0; + +/* Data for two known VIA chips */ +static struct parport_pc_via_data via_686a_data __devinitdata = { + 0x51, + 0x50, + 0x85, + 0x02, + 0xE2, + 0xF0, + 0xE6 +}; +static struct parport_pc_via_data via_8231_data __devinitdata = { + 0x45, + 0x44, + 0x50, + 0x04, + 0xF2, + 0xFA, + 0xF6 +}; + +static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq, + int autodma, struct parport_pc_via_data *via) +{ + u8 tmp, tmp2, siofunc; + u8 ppcontrol = 0; + int dma, irq; + unsigned port1, port2; + unsigned have_epp = 0; + + printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n"); + + switch(parport_init_mode) + { + case 1: + printk(KERN_DEBUG "parport_pc: setting SPP mode\n"); + siofunc = VIA_FUNCTION_PARPORT_SPP; + break; + case 2: + printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n"); + siofunc = VIA_FUNCTION_PARPORT_SPP; + ppcontrol = VIA_PARPORT_BIDIR; + break; + case 3: + printk(KERN_DEBUG "parport_pc: setting EPP mode\n"); + siofunc = VIA_FUNCTION_PARPORT_EPP; + ppcontrol = VIA_PARPORT_BIDIR; + have_epp = 1; + break; + case 4: + printk(KERN_DEBUG "parport_pc: setting ECP mode\n"); + siofunc = VIA_FUNCTION_PARPORT_ECP; + ppcontrol = VIA_PARPORT_BIDIR; + break; + case 5: + printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n"); + siofunc = VIA_FUNCTION_PARPORT_ECP; + ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP; + have_epp = 1; + break; + default: + printk(KERN_DEBUG "parport_pc: probing current configuration\n"); + siofunc = VIA_FUNCTION_PROBE; + break; + } + /* + * unlock super i/o configuration + */ + pci_read_config_byte(pdev, via->via_pci_superio_config_reg, &tmp); + tmp |= via->via_pci_superio_config_data; + pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp); + + /* Bits 1-0: Parallel Port Mode / Enable */ + outb(via->viacfg_function, VIA_CONFIG_INDEX); + tmp = inb (VIA_CONFIG_DATA); + /* Bit 5: EPP+ECP enable; bit 7: PS/2 bidirectional port enable */ + outb(via->viacfg_parport_control, VIA_CONFIG_INDEX); + tmp2 = inb (VIA_CONFIG_DATA); + if (siofunc == VIA_FUNCTION_PROBE) + { + siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE; + ppcontrol = tmp2; + } + else + { + tmp &= ~VIA_FUNCTION_PARPORT_DISABLE; + tmp |= siofunc; + outb(via->viacfg_function, VIA_CONFIG_INDEX); + outb(tmp, VIA_CONFIG_DATA); + tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP); + tmp2 |= ppcontrol; + outb(via->viacfg_parport_control, VIA_CONFIG_INDEX); + outb(tmp2, VIA_CONFIG_DATA); + } + + /* Parallel Port I/O Base Address, bits 9-2 */ + outb(via->viacfg_parport_base, VIA_CONFIG_INDEX); + port1 = inb(VIA_CONFIG_DATA) << 2; + + printk (KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",port1); + if ((port1 == 0x3BC) && have_epp) + { + outb(via->viacfg_parport_base, VIA_CONFIG_INDEX); + outb((0x378 >> 2), VIA_CONFIG_DATA); + printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n"); + port1 = 0x378; + } + + /* + * lock super i/o configuration + */ + pci_read_config_byte(pdev, via->via_pci_superio_config_reg, &tmp); + tmp &= ~via->via_pci_superio_config_data; + pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp); + + if (siofunc == VIA_FUNCTION_PARPORT_DISABLE) { + printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n"); + return 0; + } + + /* Bits 7-4: PnP Routing for Parallel Port IRQ */ + pci_read_config_byte(pdev, via->via_pci_parport_irq_reg, &tmp); + irq = ((tmp & VIA_IRQCONTROL_PARALLEL) >> 4); + + if (siofunc == VIA_FUNCTION_PARPORT_ECP) + { + /* Bits 3-2: PnP Routing for Parallel Port DMA */ + pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp); + dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2); + } + else + /* if ECP not enabled, DMA is not enabled, assumed bogus 'dma' value */ + dma = PARPORT_DMA_NONE; + + /* Let the user (or defaults) steer us away from interrupts and DMA */ + if (autoirq == PARPORT_IRQ_NONE) { + irq = PARPORT_IRQ_NONE; + dma = PARPORT_DMA_NONE; + } + if (autodma == PARPORT_DMA_NONE) + dma = PARPORT_DMA_NONE; + + switch (port1) { + case 0x3bc: port2 = 0x7bc; break; + case 0x378: port2 = 0x778; break; + case 0x278: port2 = 0x678; break; + default: + printk(KERN_INFO "parport_pc: Weird VIA parport base 0x%X, ignoring\n", + port1); + return 0; + } + + /* filter bogus IRQs */ + switch (irq) { + case 0: + case 2: + case 8: + case 13: + irq = PARPORT_IRQ_NONE; + break; + + default: /* do nothing */ + break; + } + + /* finally, do the probe with values obtained */ + if (parport_pc_probe_port (port1, port2, irq, dma, NULL)) { + printk (KERN_INFO + "parport_pc: VIA parallel port: io=0x%X", port1); + if (irq != PARPORT_IRQ_NONE) + printk (", irq=%d", irq); + if (dma != PARPORT_DMA_NONE) + printk (", dma=%d", dma); + printk ("\n"); + return 1; + } + + printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n", + port1, irq, dma); + return 0; +} + + +enum parport_pc_sio_types { + sio_via_686a = 0, /* Via VT82C686A motherboard Super I/O */ + sio_via_8231, /* Via VT8231 south bridge integrated Super IO */ + sio_ite_8872, + last_sio +}; + +/* each element directly indexed from enum list, above */ +static struct parport_pc_superio { + int (*probe) (struct pci_dev *pdev, int autoirq, int autodma, struct parport_pc_via_data *via); + struct parport_pc_via_data *via; +} parport_pc_superio_info[] __devinitdata = { + { sio_via_probe, &via_686a_data, }, + { sio_via_probe, &via_8231_data, }, + { sio_ite_8872_probe, NULL, }, +}; + +enum parport_pc_pci_cards { + siig_1p_10x = last_sio, + siig_2p_10x, + siig_1p_20x, + siig_2p_20x, + lava_parallel, + lava_parallel_dual_a, + lava_parallel_dual_b, + boca_ioppar, + plx_9050, + timedia_4078a, + timedia_4079h, + timedia_4085h, + timedia_4088a, + timedia_4089a, + timedia_4095a, + timedia_4096a, + timedia_4078u, + timedia_4079a, + timedia_4085u, + timedia_4079r, + timedia_4079s, + timedia_4079d, + timedia_4079e, + timedia_4079f, + timedia_9079a, + timedia_9079b, + timedia_9079c, + timedia_4006a, + timedia_4014, + timedia_4008a, + timedia_4018, + timedia_9018a, + syba_2p_epp, + syba_1p_ecp, + titan_010l, + titan_1284p2, + avlab_1p, + avlab_2p, + oxsemi_954, + oxsemi_840, + aks_0100, + mobility_pp, + netmos_9705, + netmos_9715, + netmos_9755, + netmos_9805, + netmos_9815, + netmos_9855, +}; + + +/* each element directly indexed from enum list, above + * (but offset by last_sio) */ +static struct parport_pc_pci { + int numports; + struct { /* BAR (base address registers) numbers in the config + space header */ + int lo; + int hi; /* -1 if not there, >6 for offset-method (max + BAR is 6) */ + } addr[4]; + + /* If set, this is called immediately after pci_enable_device. + * If it returns non-zero, no probing will take place and the + * ports will not be used. */ + int (*preinit_hook) (struct pci_dev *pdev, int autoirq, int autodma); + + /* If set, this is called after probing for ports. If 'failed' + * is non-zero we couldn't use any of the ports. */ + void (*postinit_hook) (struct pci_dev *pdev, int failed); +} cards[] __devinitdata = { + /* siig_1p_10x */ { 1, { { 2, 3 }, } }, + /* siig_2p_10x */ { 2, { { 2, 3 }, { 4, 5 }, } }, + /* siig_1p_20x */ { 1, { { 0, 1 }, } }, + /* siig_2p_20x */ { 2, { { 0, 1 }, { 2, 3 }, } }, + /* lava_parallel */ { 1, { { 0, -1 }, } }, + /* lava_parallel_dual_a */ { 1, { { 0, -1 }, } }, + /* lava_parallel_dual_b */ { 1, { { 0, -1 }, } }, + /* boca_ioppar */ { 1, { { 0, -1 }, } }, + /* plx_9050 */ { 2, { { 4, -1 }, { 5, -1 }, } }, + /* timedia_4078a */ { 1, { { 2, -1 }, } }, + /* timedia_4079h */ { 1, { { 2, 3 }, } }, + /* timedia_4085h */ { 2, { { 2, -1 }, { 4, -1 }, } }, + /* timedia_4088a */ { 2, { { 2, 3 }, { 4, 5 }, } }, + /* timedia_4089a */ { 2, { { 2, 3 }, { 4, 5 }, } }, + /* timedia_4095a */ { 2, { { 2, 3 }, { 4, 5 }, } }, + /* timedia_4096a */ { 2, { { 2, 3 }, { 4, 5 }, } }, + /* timedia_4078u */ { 1, { { 2, -1 }, } }, + /* timedia_4079a */ { 1, { { 2, 3 }, } }, + /* timedia_4085u */ { 2, { { 2, -1 }, { 4, -1 }, } }, + /* timedia_4079r */ { 1, { { 2, 3 }, } }, + /* timedia_4079s */ { 1, { { 2, 3 }, } }, + /* timedia_4079d */ { 1, { { 2, 3 }, } }, + /* timedia_4079e */ { 1, { { 2, 3 }, } }, + /* timedia_4079f */ { 1, { { 2, 3 }, } }, + /* timedia_9079a */ { 1, { { 2, 3 }, } }, + /* timedia_9079b */ { 1, { { 2, 3 }, } }, + /* timedia_9079c */ { 1, { { 2, 3 }, } }, + /* timedia_4006a */ { 1, { { 0, -1 }, } }, + /* timedia_4014 */ { 2, { { 0, -1 }, { 2, -1 }, } }, + /* timedia_4008a */ { 1, { { 0, 1 }, } }, + /* timedia_4018 */ { 2, { { 0, 1 }, { 2, 3 }, } }, + /* timedia_9018a */ { 2, { { 0, 1 }, { 2, 3 }, } }, + /* SYBA uses fixed offsets in + a 1K io window */ + /* syba_2p_epp AP138B */ { 2, { { 0, 0x078 }, { 0, 0x178 }, } }, + /* syba_1p_ecp W83787 */ { 1, { { 0, 0x078 }, } }, + /* titan_010l */ { 1, { { 3, -1 }, } }, + /* titan_1284p2 */ { 2, { { 0, 1 }, { 2, 3 }, } }, + /* avlab_1p */ { 1, { { 0, 1}, } }, + /* avlab_2p */ { 2, { { 0, 1}, { 2, 3 },} }, + /* The Oxford Semi cards are unusual: 954 doesn't support ECP, + * and 840 locks up if you write 1 to bit 2! */ + /* oxsemi_954 */ { 1, { { 0, -1 }, } }, + /* oxsemi_840 */ { 1, { { 0, -1 }, } }, + /* aks_0100 */ { 1, { { 0, -1 }, } }, + /* mobility_pp */ { 1, { { 0, 1 }, } }, + /* netmos_9705 */ { 1, { { 0, -1 }, } }, /* untested */ + /* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */ + /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */ + /* netmos_9805 */ { 1, { { 0, -1 }, } }, /* untested */ + /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */ + /* netmos_9855 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */ +}; + +static struct pci_device_id parport_pc_pci_tbl[] = { + /* Super-IO onboard chips */ + { 0x1106, 0x0686, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_via_686a }, + { 0x1106, 0x8231, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_via_8231 }, + { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_ite_8872 }, + + /* PCI cards */ + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1P_10x, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1p_10x }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P_10x, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p_10x }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1P_20x, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1p_20x }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P_20x, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p_20x }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PARALLEL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DUAL_PAR_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel_dual_a }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DUAL_PAR_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel_dual_b }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_BOCA_IOPPAR, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, boca_ioppar }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0,0, plx_9050 }, + /* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/ + { 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a }, + { 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h }, + { 0x1409, 0x7168, 0x1409, 0x4085, 0, 0, timedia_4085h }, + { 0x1409, 0x7168, 0x1409, 0x4088, 0, 0, timedia_4088a }, + { 0x1409, 0x7168, 0x1409, 0x4089, 0, 0, timedia_4089a }, + { 0x1409, 0x7168, 0x1409, 0x4095, 0, 0, timedia_4095a }, + { 0x1409, 0x7168, 0x1409, 0x4096, 0, 0, timedia_4096a }, + { 0x1409, 0x7168, 0x1409, 0x5078, 0, 0, timedia_4078u }, + { 0x1409, 0x7168, 0x1409, 0x5079, 0, 0, timedia_4079a }, + { 0x1409, 0x7168, 0x1409, 0x5085, 0, 0, timedia_4085u }, + { 0x1409, 0x7168, 0x1409, 0x6079, 0, 0, timedia_4079r }, + { 0x1409, 0x7168, 0x1409, 0x7079, 0, 0, timedia_4079s }, + { 0x1409, 0x7168, 0x1409, 0x8079, 0, 0, timedia_4079d }, + { 0x1409, 0x7168, 0x1409, 0x9079, 0, 0, timedia_4079e }, + { 0x1409, 0x7168, 0x1409, 0xa079, 0, 0, timedia_4079f }, + { 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a }, + { 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b }, + { 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c }, + { 0x1409, 0x7268, 0x1409, 0x0101, 0, 0, timedia_4006a }, + { 0x1409, 0x7268, 0x1409, 0x0102, 0, 0, timedia_4014 }, + { 0x1409, 0x7268, 0x1409, 0x0103, 0, 0, timedia_4008a }, + { 0x1409, 0x7268, 0x1409, 0x0104, 0, 0, timedia_4018 }, + { 0x1409, 0x7268, 0x1409, 0x9018, 0, 0, timedia_9018a }, + { 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp }, + { PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_2P_EPP, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_2p_epp }, + { PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_1P_ECP, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_1p_ecp }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_010L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_010l }, + { 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 }, + /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/ + { 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p}, /* AFAVLAB_TK9902 */ + { 0x14db, 0x2121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2p}, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954PP, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_954 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_12PCI840, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_840 }, + { PCI_VENDOR_ID_AKS, PCI_DEVICE_ID_AKS_ALADDINCARD, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 }, + /* NetMos communication controllers */ + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9715, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9715 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9755, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9755 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9805, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9805 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9815, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 }, + { 0, } /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci,parport_pc_pci_tbl); + +struct pci_parport_data { + int num; + struct parport *ports[2]; +}; + +static int parport_pc_pci_probe (struct pci_dev *dev, + const struct pci_device_id *id) +{ + int err, count, n, i = id->driver_data; + struct pci_parport_data *data; + + if (i < last_sio) + /* This is an onboard Super-IO and has already been probed */ + return 0; + + /* This is a PCI card */ + i -= last_sio; + count = 0; + if ((err = pci_enable_device (dev)) != 0) + return err; + + data = kmalloc(sizeof(struct pci_parport_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + if (cards[i].preinit_hook && + cards[i].preinit_hook (dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) { + kfree(data); + return -ENODEV; + } + + for (n = 0; n < cards[i].numports; n++) { + int lo = cards[i].addr[n].lo; + int hi = cards[i].addr[n].hi; + unsigned long io_lo, io_hi; + io_lo = pci_resource_start (dev, lo); + io_hi = 0; + if ((hi >= 0) && (hi <= 6)) + io_hi = pci_resource_start (dev, hi); + else if (hi > 6) + io_lo += hi; /* Reinterpret the meaning of + "hi" as an offset (see SYBA + def.) */ + /* TODO: test if sharing interrupts works */ + printk (KERN_DEBUG "PCI parallel port detected: %04x:%04x, " + "I/O at %#lx(%#lx)\n", + parport_pc_pci_tbl[i + last_sio].vendor, + parport_pc_pci_tbl[i + last_sio].device, io_lo, io_hi); + data->ports[count] = + parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE, + PARPORT_DMA_NONE, dev); + if (data->ports[count]) + count++; + } + + data->num = count; + + if (cards[i].postinit_hook) + cards[i].postinit_hook (dev, count == 0); + + if (count) { + pci_set_drvdata(dev, data); + return 0; + } + + kfree(data); + + return -ENODEV; +} + +static void __devexit parport_pc_pci_remove(struct pci_dev *dev) +{ + struct pci_parport_data *data = pci_get_drvdata(dev); + int i; + + pci_set_drvdata(dev, NULL); + + if (data) { + for (i = data->num - 1; i >= 0; i--) + parport_pc_unregister_port(data->ports[i]); + + kfree(data); + } +} + +static struct pci_driver parport_pc_pci_driver = { + .name = "parport_pc", + .id_table = parport_pc_pci_tbl, + .probe = parport_pc_pci_probe, + .remove = __devexit_p(parport_pc_pci_remove), +}; + +static int __init parport_pc_init_superio (int autoirq, int autodma) +{ + const struct pci_device_id *id; + struct pci_dev *pdev = NULL; + int ret = 0; + + while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) { + id = pci_match_device (parport_pc_pci_tbl, pdev); + if (id == NULL || id->driver_data >= last_sio) + continue; + + if (parport_pc_superio_info[id->driver_data].probe + (pdev, autoirq, autodma,parport_pc_superio_info[id->driver_data].via)) { + ret++; + } + } + + return ret; /* number of devices found */ +} +#else +static struct pci_driver parport_pc_pci_driver; +static int __init parport_pc_init_superio(int autoirq, int autodma) {return 0;} +#endif /* CONFIG_PCI */ + + +static const struct pnp_device_id parport_pc_pnp_tbl[] = { + /* Standard LPT Printer Port */ + {.id = "PNP0400", .driver_data = 0}, + /* ECP Printer Port */ + {.id = "PNP0401", .driver_data = 0}, + { } +}; + +MODULE_DEVICE_TABLE(pnp,parport_pc_pnp_tbl); + +static int parport_pc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id) +{ + struct parport *pdata; + unsigned long io_lo, io_hi; + int dma, irq; + + if (pnp_port_valid(dev,0) && + !(pnp_port_flags(dev,0) & IORESOURCE_DISABLED)) { + io_lo = pnp_port_start(dev,0); + } else + return -EINVAL; + + if (pnp_port_valid(dev,1) && + !(pnp_port_flags(dev,1) & IORESOURCE_DISABLED)) { + io_hi = pnp_port_start(dev,1); + } else + io_hi = 0; + + if (pnp_irq_valid(dev,0) && + !(pnp_irq_flags(dev,0) & IORESOURCE_DISABLED)) { + irq = pnp_irq(dev,0); + } else + irq = PARPORT_IRQ_NONE; + + if (pnp_dma_valid(dev,0) && + !(pnp_dma_flags(dev,0) & IORESOURCE_DISABLED)) { + dma = pnp_dma(dev,0); + } else + dma = PARPORT_DMA_NONE; + + printk(KERN_INFO "parport: PnPBIOS parport detected.\n"); + if (!(pdata = parport_pc_probe_port (io_lo, io_hi, irq, dma, NULL))) + return -ENODEV; + + pnp_set_drvdata(dev,pdata); + return 0; +} + +static void parport_pc_pnp_remove(struct pnp_dev *dev) +{ + struct parport *pdata = (struct parport *)pnp_get_drvdata(dev); + if (!pdata) + return; + + parport_pc_unregister_port(pdata); +} + +/* we only need the pnp layer to activate the device, at least for now */ +static struct pnp_driver parport_pc_pnp_driver = { + .name = "parport_pc", + .id_table = parport_pc_pnp_tbl, + .probe = parport_pc_pnp_probe, + .remove = parport_pc_pnp_remove, +}; + + +/* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */ +static int __devinit __attribute__((unused)) +parport_pc_find_isa_ports (int autoirq, int autodma) +{ + int count = 0; + + if (parport_pc_probe_port(0x3bc, 0x7bc, autoirq, autodma, NULL)) + count++; + if (parport_pc_probe_port(0x378, 0x778, autoirq, autodma, NULL)) + count++; + if (parport_pc_probe_port(0x278, 0x678, autoirq, autodma, NULL)) + count++; + + return count; +} + +/* This function is called by parport_pc_init if the user didn't + * specify any ports to probe. Its job is to find some ports. Order + * is important here -- we want ISA ports to be registered first, + * followed by PCI cards (for least surprise), but before that we want + * to do chipset-specific tests for some onboard ports that we know + * about. + * + * autoirq is PARPORT_IRQ_NONE, PARPORT_IRQ_AUTO, or PARPORT_IRQ_PROBEONLY + * autodma is PARPORT_DMA_NONE or PARPORT_DMA_AUTO + */ +static int __init parport_pc_find_ports (int autoirq, int autodma) +{ + int count = 0, r; + +#ifdef CONFIG_PARPORT_PC_SUPERIO + detect_and_report_winbond (); + detect_and_report_smsc (); +#endif + + /* Onboard SuperIO chipsets that show themselves on the PCI bus. */ + count += parport_pc_init_superio (autoirq, autodma); + + /* PnP ports, skip detection if SuperIO already found them */ + if (!count) { + r = pnp_register_driver (&parport_pc_pnp_driver); + if (r >= 0) { + pnp_registered_parport = 1; + count += r; + } + } + + /* ISA ports and whatever (see asm/parport.h). */ + count += parport_pc_find_nonpci_ports (autoirq, autodma); + + r = pci_register_driver (&parport_pc_pci_driver); + if (r) + return r; + pci_registered_parport = 1; + count += 1; + + return count; +} + +/* + * Piles of crap below pretend to be a parser for module and kernel + * parameters. Say "thank you" to whoever had come up with that + * syntax and keep in mind that code below is a cleaned up version. + */ + +static int __initdata io[PARPORT_PC_MAX_PORTS+1] = { [0 ... PARPORT_PC_MAX_PORTS] = 0 }; +static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] = + { [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO }; +static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE }; +static int __initdata irqval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY }; + +static int __init parport_parse_param(const char *s, int *val, + int automatic, int none, int nofifo) +{ + if (!s) + return 0; + if (!strncmp(s, "auto", 4)) + *val = automatic; + else if (!strncmp(s, "none", 4)) + *val = none; + else if (nofifo && !strncmp(s, "nofifo", 4)) + *val = nofifo; + else { + char *ep; + unsigned long r = simple_strtoul(s, &ep, 0); + if (ep != s) + *val = r; + else { + printk(KERN_ERR "parport: bad specifier `%s'\n", s); + return -1; + } + } + return 0; +} + +static int __init parport_parse_irq(const char *irqstr, int *val) +{ + return parport_parse_param(irqstr, val, PARPORT_IRQ_AUTO, + PARPORT_IRQ_NONE, 0); +} + +static int __init parport_parse_dma(const char *dmastr, int *val) +{ + return parport_parse_param(dmastr, val, PARPORT_DMA_AUTO, + PARPORT_DMA_NONE, PARPORT_DMA_NOFIFO); +} + +#ifdef CONFIG_PCI +static int __init parport_init_mode_setup(char *str) +{ + printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n", str); + + if (!strcmp (str, "spp")) + parport_init_mode=1; + if (!strcmp (str, "ps2")) + parport_init_mode=2; + if (!strcmp (str, "epp")) + parport_init_mode=3; + if (!strcmp (str, "ecp")) + parport_init_mode=4; + if (!strcmp (str, "ecpepp")) + parport_init_mode=5; + return 1; +} +#endif + +#ifdef MODULE +static const char *irq[PARPORT_PC_MAX_PORTS]; +static const char *dma[PARPORT_PC_MAX_PORTS]; + +MODULE_PARM_DESC(io, "Base I/O address (SPP regs)"); +module_param_array(io, int, NULL, 0); +MODULE_PARM_DESC(io_hi, "Base I/O address (ECR)"); +module_param_array(io_hi, int, NULL, 0); +MODULE_PARM_DESC(irq, "IRQ line"); +module_param_array(irq, charp, NULL, 0); +MODULE_PARM_DESC(dma, "DMA channel"); +module_param_array(dma, charp, NULL, 0); +#if defined(CONFIG_PARPORT_PC_SUPERIO) || \ + (defined(CONFIG_PARPORT_1284) && defined(CONFIG_PARPORT_PC_FIFO)) +MODULE_PARM_DESC(verbose_probing, "Log chit-chat during initialisation"); +module_param(verbose_probing, int, 0644); +#endif +#ifdef CONFIG_PCI +static char *init_mode; +MODULE_PARM_DESC(init_mode, "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)"); +module_param(init_mode, charp, 0); +#endif + +static int __init parse_parport_params(void) +{ + unsigned int i; + int val; + +#ifdef CONFIG_PCI + if (init_mode) + parport_init_mode_setup(init_mode); +#endif + + for (i = 0; i < PARPORT_PC_MAX_PORTS && io[i]; i++) { + if (parport_parse_irq(irq[i], &val)) + return 1; + irqval[i] = val; + if (parport_parse_dma(dma[i], &val)) + return 1; + dmaval[i] = val; + } + if (!io[0]) { + /* The user can make us use any IRQs or DMAs we find. */ + if (irq[0] && !parport_parse_irq(irq[0], &val)) + switch (val) { + case PARPORT_IRQ_NONE: + case PARPORT_IRQ_AUTO: + irqval[0] = val; + break; + default: + printk (KERN_WARNING + "parport_pc: irq specified " + "without base address. Use 'io=' " + "to specify one\n"); + } + + if (dma[0] && !parport_parse_dma(dma[0], &val)) + switch (val) { + case PARPORT_DMA_NONE: + case PARPORT_DMA_AUTO: + dmaval[0] = val; + break; + default: + printk (KERN_WARNING + "parport_pc: dma specified " + "without base address. Use 'io=' " + "to specify one\n"); + } + } + return 0; +} + +#else + +static int parport_setup_ptr __initdata = 0; + +/* + * Acceptable parameters: + * + * parport=0 + * parport=auto + * parport=0xBASE[,IRQ[,DMA]] + * + * IRQ/DMA may be numeric or 'auto' or 'none' + */ +static int __init parport_setup (char *str) +{ + char *endptr; + char *sep; + int val; + + if (!str || !*str || (*str == '0' && !*(str+1))) { + /* Disable parport if "parport=0" in cmdline */ + io[0] = PARPORT_DISABLE; + return 1; + } + + if (!strncmp (str, "auto", 4)) { + irqval[0] = PARPORT_IRQ_AUTO; + dmaval[0] = PARPORT_DMA_AUTO; + return 1; + } + + val = simple_strtoul (str, &endptr, 0); + if (endptr == str) { + printk (KERN_WARNING "parport=%s not understood\n", str); + return 1; + } + + if (parport_setup_ptr == PARPORT_PC_MAX_PORTS) { + printk(KERN_ERR "parport=%s ignored, too many ports\n", str); + return 1; + } + + io[parport_setup_ptr] = val; + irqval[parport_setup_ptr] = PARPORT_IRQ_NONE; + dmaval[parport_setup_ptr] = PARPORT_DMA_NONE; + + sep = strchr(str, ','); + if (sep++) { + if (parport_parse_irq(sep, &val)) + return 1; + irqval[parport_setup_ptr] = val; + sep = strchr(sep, ','); + if (sep++) { + if (parport_parse_dma(sep, &val)) + return 1; + dmaval[parport_setup_ptr] = val; + } + } + parport_setup_ptr++; + return 1; +} + +static int __init parse_parport_params(void) +{ + return io[0] == PARPORT_DISABLE; +} + +__setup ("parport=", parport_setup); + +/* + * Acceptable parameters: + * + * parport_init_mode=[spp|ps2|epp|ecp|ecpepp] + */ +#ifdef CONFIG_PCI +__setup("parport_init_mode=",parport_init_mode_setup); +#endif +#endif + +/* "Parser" ends here */ + +static int __init parport_pc_init(void) +{ + int count = 0; + + if (parse_parport_params()) + return -EINVAL; + + if (io[0]) { + int i; + /* Only probe the ports we were given. */ + user_specified = 1; + for (i = 0; i < PARPORT_PC_MAX_PORTS; i++) { + if (!io[i]) + break; + if ((io_hi[i]) == PARPORT_IOHI_AUTO) + io_hi[i] = 0x400 + io[i]; + if (parport_pc_probe_port(io[i], io_hi[i], + irqval[i], dmaval[i], NULL)) + count++; + } + } else + count += parport_pc_find_ports (irqval[0], dmaval[0]); + + return 0; +} + +static void __exit parport_pc_exit(void) +{ + if (pci_registered_parport) + pci_unregister_driver (&parport_pc_pci_driver); + if (pnp_registered_parport) + pnp_unregister_driver (&parport_pc_pnp_driver); + + spin_lock(&ports_lock); + while (!list_empty(&ports_list)) { + struct parport_pc_private *priv; + struct parport *port; + priv = list_entry(ports_list.next, + struct parport_pc_private, list); + port = priv->port; + spin_unlock(&ports_lock); + parport_pc_unregister_port(port); + spin_lock(&ports_lock); + } + spin_unlock(&ports_lock); +} + +MODULE_AUTHOR("Phil Blundell, Tim Waugh, others"); +MODULE_DESCRIPTION("PC-style parallel port driver"); +MODULE_LICENSE("GPL"); +module_init(parport_pc_init) +module_exit(parport_pc_exit) |