Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits)
  PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write
  PCI: Fix the NIU MSI-X problem in a better way
  PCI ASPM: remove get_root_port_link
  PCI ASPM: cleanup pcie_aspm_sanity_check
  PCI ASPM: remove has_switch field
  PCI ASPM: cleanup calc_Lx_latency
  PCI ASPM: cleanup pcie_aspm_get_cap_device
  PCI ASPM: cleanup clkpm checks
  PCI ASPM: cleanup __pcie_aspm_check_state_one
  PCI ASPM: cleanup initialization
  PCI ASPM: cleanup change input argument of aspm functions
  PCI ASPM: cleanup misc in struct pcie_link_state
  PCI ASPM: cleanup clkpm state in struct pcie_link_state
  PCI ASPM: cleanup latency field in struct pcie_link_state
  PCI ASPM: cleanup aspm state field in struct pcie_link_state
  PCI ASPM: fix typo in struct pcie_link_state
  PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS
  PCI: remove redundant __msi_set_enable()
  PCI PM: consistently use type bool for wake enable variable
  x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded
  ...

17 files changed, 1248 insertions, 1399 deletions

diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 9aa4fe1..66f29bc 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -4,7 +4,7 @@
 
 menuconfig HOTPLUG_PCI
 	tristate "Support for PCI Hotplug"
-	depends on PCI && HOTPLUG
+	depends on PCI && HOTPLUG && SYSFS
 	---help---
 	  Say Y here if you have a motherboard with a PCI Hotplug controller.
 	  This allows you to add and remove PCI cards while the machine is
@@ -41,7 +41,7 @@ config HOTPLUG_PCI_FAKE
 
 config HOTPLUG_PCI_COMPAQ
 	tristate "Compaq PCI Hotplug driver"
-	depends on X86 && PCI_BIOS && PCI_LEGACY
+	depends on X86 && PCI_BIOS
 	help
 	  Say Y here if you have a motherboard with a Compaq PCI Hotplug
 	  controller.
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 43c10bd..4dd7114 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -77,7 +77,6 @@ static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
 
 static struct hotplug_slot_ops acpi_hotplug_slot_ops = {
-	.owner			= THIS_MODULE,
 	.enable_slot		= enable_slot,
 	.disable_slot		= disable_slot,
 	.set_attention_status	= set_attention_status,
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index de94f4f..a5b9f6a 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -72,7 +72,6 @@ static int get_adapter_status(struct hotplug_slot *slot, u8 * value);
 static int get_latch_status(struct hotplug_slot *slot, u8 * value);
 
 static struct hotplug_slot_ops cpci_hotplug_slot_ops = {
-	.owner = THIS_MODULE,
 	.enable_slot = enable_slot,
 	.disable_slot = disable_slot,
 	.set_attention_status = set_attention_status,
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index afaf8f6..5383600 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -150,25 +150,25 @@ struct ctrl_reg {			/* offset */
 
 /* offsets to the controller registers based on the above structure layout */
 enum ctrl_offsets {
-	SLOT_RST = 		offsetof(struct ctrl_reg, slot_RST),
+	SLOT_RST =		offsetof(struct ctrl_reg, slot_RST),
 	SLOT_ENABLE =		offsetof(struct ctrl_reg, slot_enable),
 	MISC =			offsetof(struct ctrl_reg, misc),
 	LED_CONTROL =		offsetof(struct ctrl_reg, led_control),
 	INT_INPUT_CLEAR =	offsetof(struct ctrl_reg, int_input_clear),
-	INT_MASK = 		offsetof(struct ctrl_reg, int_mask),
-	CTRL_RESERVED0 = 	offsetof(struct ctrl_reg, reserved0),
+	INT_MASK =		offsetof(struct ctrl_reg, int_mask),
+	CTRL_RESERVED0 =	offsetof(struct ctrl_reg, reserved0),
 	CTRL_RESERVED1 =	offsetof(struct ctrl_reg, reserved1),
 	CTRL_RESERVED2 =	offsetof(struct ctrl_reg, reserved1),
-	GEN_OUTPUT_AB = 	offsetof(struct ctrl_reg, gen_output_AB),
-	NON_INT_INPUT = 	offsetof(struct ctrl_reg, non_int_input),
+	GEN_OUTPUT_AB =		offsetof(struct ctrl_reg, gen_output_AB),
+	NON_INT_INPUT =		offsetof(struct ctrl_reg, non_int_input),
 	CTRL_RESERVED3 =	offsetof(struct ctrl_reg, reserved3),
 	CTRL_RESERVED4 =	offsetof(struct ctrl_reg, reserved4),
 	CTRL_RESERVED5 =	offsetof(struct ctrl_reg, reserved5),
 	CTRL_RESERVED6 =	offsetof(struct ctrl_reg, reserved6),
 	CTRL_RESERVED7 =	offsetof(struct ctrl_reg, reserved7),
 	CTRL_RESERVED8 =	offsetof(struct ctrl_reg, reserved8),
-	SLOT_MASK = 		offsetof(struct ctrl_reg, slot_mask),
-	CTRL_RESERVED9 = 	offsetof(struct ctrl_reg, reserved9),
+	SLOT_MASK =		offsetof(struct ctrl_reg, slot_mask),
+	CTRL_RESERVED9 =	offsetof(struct ctrl_reg, reserved9),
 	CTRL_RESERVED10 =	offsetof(struct ctrl_reg, reserved10),
 	CTRL_RESERVED11 =	offsetof(struct ctrl_reg, reserved11),
 	SLOT_SERR =		offsetof(struct ctrl_reg, slot_SERR),
@@ -190,7 +190,9 @@ struct hrt {
 	u32 reserved2;
 } __attribute__ ((packed));
 
-/* offsets to the hotplug resource table registers based on the above structure layout */
+/* offsets to the hotplug resource table registers based on the above
+ * structure layout
+ */
 enum hrt_offsets {
 	SIG0 =			offsetof(struct hrt, sig0),
 	SIG1 =			offsetof(struct hrt, sig1),
@@ -217,18 +219,20 @@ struct slot_rt {
 	u16 pre_mem_length;
 } __attribute__ ((packed));
 
-/* offsets to the hotplug slot resource table registers based on the above structure layout */
+/* offsets to the hotplug slot resource table registers based on the above
+ * structure layout
+ */
 enum slot_rt_offsets {
 	DEV_FUNC =		offsetof(struct slot_rt, dev_func),
-	PRIMARY_BUS = 		offsetof(struct slot_rt, primary_bus),
-	SECONDARY_BUS = 	offsetof(struct slot_rt, secondary_bus),
-	MAX_BUS = 		offsetof(struct slot_rt, max_bus),
-	IO_BASE = 		offsetof(struct slot_rt, io_base),
-	IO_LENGTH = 		offsetof(struct slot_rt, io_length),
-	MEM_BASE = 		offsetof(struct slot_rt, mem_base),
-	MEM_LENGTH = 		offsetof(struct slot_rt, mem_length),
-	PRE_MEM_BASE = 		offsetof(struct slot_rt, pre_mem_base),
-	PRE_MEM_LENGTH = 	offsetof(struct slot_rt, pre_mem_length),
+	PRIMARY_BUS =		offsetof(struct slot_rt, primary_bus),
+	SECONDARY_BUS =		offsetof(struct slot_rt, secondary_bus),
+	MAX_BUS =		offsetof(struct slot_rt, max_bus),
+	IO_BASE =		offsetof(struct slot_rt, io_base),
+	IO_LENGTH =		offsetof(struct slot_rt, io_length),
+	MEM_BASE =		offsetof(struct slot_rt, mem_base),
+	MEM_LENGTH =		offsetof(struct slot_rt, mem_length),
+	PRE_MEM_BASE =		offsetof(struct slot_rt, pre_mem_base),
+	PRE_MEM_LENGTH =	offsetof(struct slot_rt, pre_mem_length),
 };
 
 struct pci_func {
@@ -286,8 +290,8 @@ struct event_info {
 struct controller {
 	struct controller *next;
 	u32 ctrl_int_comp;
-	struct mutex crit_sect;		/* critical section mutex */
-	void __iomem *hpc_reg;		/* cookie for our pci controller location */
+	struct mutex crit_sect;	/* critical section mutex */
+	void __iomem *hpc_reg;	/* cookie for our pci controller location */
 	struct pci_resource *mem_head;
 	struct pci_resource *p_mem_head;
 	struct pci_resource *io_head;
@@ -299,7 +303,7 @@ struct controller {
 	u8 next_event;
 	u8 interrupt;
 	u8 cfgspc_irq;
-	u8 bus;				/* bus number for the pci hotplug controller */
+	u8 bus;			/* bus number for the pci hotplug controller */
 	u8 rev;
 	u8 slot_device_offset;
 	u8 first_slot;
@@ -401,46 +405,57 @@ struct resource_lists {
 
 
 /* debugfs functions for the hotplug controller info */
-extern void cpqhp_initialize_debugfs		(void);
-extern void cpqhp_shutdown_debugfs		(void);
-extern void cpqhp_create_debugfs_files		(struct controller *ctrl);
-extern void cpqhp_remove_debugfs_files		(struct controller *ctrl);
+extern void cpqhp_initialize_debugfs(void);
+extern void cpqhp_shutdown_debugfs(void);
+extern void cpqhp_create_debugfs_files(struct controller *ctrl);
+extern void cpqhp_remove_debugfs_files(struct controller *ctrl);
 
 /* controller functions */
-extern void	cpqhp_pushbutton_thread		(unsigned long event_pointer);
-extern irqreturn_t cpqhp_ctrl_intr		(int IRQ, void *data);
-extern int	cpqhp_find_available_resources	(struct controller *ctrl, void __iomem *rom_start);
-extern int	cpqhp_event_start_thread	(void);
-extern void	cpqhp_event_stop_thread		(void);
-extern struct pci_func *cpqhp_slot_create	(unsigned char busnumber);
-extern struct pci_func *cpqhp_slot_find		(unsigned char bus, unsigned char device, unsigned char index);
-extern int	cpqhp_process_SI		(struct controller *ctrl, struct pci_func *func);
-extern int	cpqhp_process_SS		(struct controller *ctrl, struct pci_func *func);
-extern int	cpqhp_hardware_test		(struct controller *ctrl, int test_num);
+extern void cpqhp_pushbutton_thread(unsigned long event_pointer);
+extern irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data);
+extern int cpqhp_find_available_resources(struct controller *ctrl,
+					  void __iomem *rom_start);
+extern int cpqhp_event_start_thread(void);
+extern void cpqhp_event_stop_thread(void);
+extern struct pci_func *cpqhp_slot_create(unsigned char busnumber);
+extern struct pci_func *cpqhp_slot_find(unsigned char bus, unsigned char device,
+					unsigned char index);
+extern int cpqhp_process_SI(struct controller *ctrl, struct pci_func *func);
+extern int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func);
+extern int cpqhp_hardware_test(struct controller *ctrl, int test_num);
 
 /* resource functions */
 extern int	cpqhp_resource_sort_and_combine	(struct pci_resource **head);
 
 /* pci functions */
-extern int	cpqhp_set_irq			(u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num);
-extern int	cpqhp_get_bus_dev		(struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot);
-extern int	cpqhp_save_config		(struct controller *ctrl, int busnumber, int is_hot_plug);
-extern int	cpqhp_save_base_addr_length	(struct controller *ctrl, struct pci_func * func);
-extern int	cpqhp_save_used_resources	(struct controller *ctrl, struct pci_func * func);
-extern int	cpqhp_configure_board		(struct controller *ctrl, struct pci_func * func);
-extern int	cpqhp_save_slot_config		(struct controller *ctrl, struct pci_func * new_slot);
-extern int	cpqhp_valid_replace		(struct controller *ctrl, struct pci_func * func);
-extern void	cpqhp_destroy_board_resources	(struct pci_func * func);
-extern int	cpqhp_return_board_resources	(struct pci_func * func, struct resource_lists * resources);
-extern void	cpqhp_destroy_resource_list	(struct resource_lists * resources);
-extern int	cpqhp_configure_device		(struct controller* ctrl, struct pci_func* func);
-extern int	cpqhp_unconfigure_device	(struct pci_func* func);
+extern int cpqhp_set_irq(u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num);
+extern int cpqhp_get_bus_dev(struct controller *ctrl, u8 *bus_num, u8 *dev_num,
+			     u8 slot);
+extern int cpqhp_save_config(struct controller *ctrl, int busnumber,
+			     int is_hot_plug);
+extern int cpqhp_save_base_addr_length(struct controller *ctrl,
+				       struct pci_func *func);
+extern int cpqhp_save_used_resources(struct controller *ctrl,
+				     struct pci_func *func);
+extern int cpqhp_configure_board(struct controller *ctrl,
+				 struct pci_func *func);
+extern int cpqhp_save_slot_config(struct controller *ctrl,
+				  struct pci_func *new_slot);
+extern int cpqhp_valid_replace(struct controller *ctrl, struct pci_func *func);
+extern void cpqhp_destroy_board_resources(struct pci_func *func);
+extern int cpqhp_return_board_resources	(struct pci_func *func,
+					 struct resource_lists *resources);
+extern void cpqhp_destroy_resource_list(struct resource_lists *resources);
+extern int cpqhp_configure_device(struct controller *ctrl,
+				  struct pci_func *func);
+extern int cpqhp_unconfigure_device(struct pci_func *func);
 
 /* Global variables */
 extern int cpqhp_debug;
 extern int cpqhp_legacy_mode;
 extern struct controller *cpqhp_ctrl_list;
 extern struct pci_func *cpqhp_slot_list[256];
+extern struct irq_routing_table *cpqhp_routing_table;
 
 /* these can be gotten rid of, but for debugging they are purty */
 extern u8 cpqhp_nic_irq;
@@ -449,7 +464,7 @@ extern u8 cpqhp_disk_irq;
 
 /* inline functions */
 
-static inline char *slot_name(struct slot *slot)
+static inline const char *slot_name(struct slot *slot)
 {
 	return hotplug_slot_name(slot->hotplug_slot);
 }
@@ -458,9 +473,9 @@ static inline char *slot_name(struct slot *slot)
  * return_resource
  *
  * Puts node back in the resource list pointed to by head
- *
  */
-static inline void return_resource(struct pci_resource **head, struct pci_resource *node)
+static inline void return_resource(struct pci_resource **head,
+				   struct pci_resource *node)
 {
 	if (!node || !head)
 		return;
@@ -471,7 +486,7 @@ static inline void return_resource(struct pci_resource **head, struct pci_resour
 static inline void set_SOGO(struct controller *ctrl)
 {
 	u16 misc;
-	
+
 	misc = readw(ctrl->hpc_reg + MISC);
 	misc = (misc | 0x0001) & 0xFFFB;
 	writew(misc, ctrl->hpc_reg + MISC);
@@ -481,7 +496,7 @@ static inline void set_SOGO(struct controller *ctrl)
 static inline void amber_LED_on(struct controller *ctrl, u8 slot)
 {
 	u32 led_control;
-	
+
 	led_control = readl(ctrl->hpc_reg + LED_CONTROL);
 	led_control |= (0x01010000L << slot);
 	writel(led_control, ctrl->hpc_reg + LED_CONTROL);
@@ -491,7 +506,7 @@ static inline void amber_LED_on(struct controller *ctrl, u8 slot)
 static inline void amber_LED_off(struct controller *ctrl, u8 slot)
 {
 	u32 led_control;
-	
+
 	led_control = readl(ctrl->hpc_reg + LED_CONTROL);
 	led_control &= ~(0x01010000L << slot);
 	writel(led_control, ctrl->hpc_reg + LED_CONTROL);
@@ -504,7 +519,7 @@ static inline int read_amber_LED(struct controller *ctrl, u8 slot)
 
 	led_control = readl(ctrl->hpc_reg + LED_CONTROL);
 	led_control &= (0x01010000L << slot);
-	
+
 	return led_control ? 1 : 0;
 }
 
@@ -512,7 +527,7 @@ static inline int read_amber_LED(struct controller *ctrl, u8 slot)
 static inline void green_LED_on(struct controller *ctrl, u8 slot)
 {
 	u32 led_control;
-	
+
 	led_control = readl(ctrl->hpc_reg + LED_CONTROL);
 	led_control |= 0x0101L << slot;
 	writel(led_control, ctrl->hpc_reg + LED_CONTROL);
@@ -521,7 +536,7 @@ static inline void green_LED_on(struct controller *ctrl, u8 slot)
 static inline void green_LED_off(struct controller *ctrl, u8 slot)
 {
 	u32 led_control;
-	
+
 	led_control = readl(ctrl->hpc_reg + LED_CONTROL);
 	led_control &= ~(0x0101L << slot);
 	writel(led_control, ctrl->hpc_reg + LED_CONTROL);
@@ -531,7 +546,7 @@ static inline void green_LED_off(struct controller *ctrl, u8 slot)
 static inline void green_LED_blink(struct controller *ctrl, u8 slot)
 {
 	u32 led_control;
-	
+
 	led_control = readl(ctrl->hpc_reg + LED_CONTROL);
 	led_control &= ~(0x0101L << slot);
 	led_control |= (0x0001L << slot);
@@ -575,22 +590,21 @@ static inline u8 read_slot_enable(struct controller *ctrl)
 }
 
 
-/*
+/**
  * get_controller_speed - find the current frequency/mode of controller.
  *
  * @ctrl: controller to get frequency/mode for.
  *
  * Returns controller speed.
- *
  */
 static inline u8 get_controller_speed(struct controller *ctrl)
 {
 	u8 curr_freq;
- 	u16 misc;
- 	
+	u16 misc;
+
 	if (ctrl->pcix_support) {
 		curr_freq = readb(ctrl->hpc_reg + NEXT_CURR_FREQ);
-		if ((curr_freq & 0xB0) == 0xB0) 
+		if ((curr_freq & 0xB0) == 0xB0)
 			return PCI_SPEED_133MHz_PCIX;
 		if ((curr_freq & 0xA0) == 0xA0)
 			return PCI_SPEED_100MHz_PCIX;
@@ -602,19 +616,18 @@ static inline u8 get_controller_speed(struct controller *ctrl)
 		return PCI_SPEED_33MHz;
 	}
 
- 	misc = readw(ctrl->hpc_reg + MISC);
- 	return (misc & 0x0800) ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
+	misc = readw(ctrl->hpc_reg + MISC);
+	return (misc & 0x0800) ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
 }
- 
 
-/*
+
+/**
  * get_adapter_speed - find the max supported frequency/mode of adapter.
  *
  * @ctrl: hotplug controller.
  * @hp_slot: hotplug slot where adapter is installed.
  *
  * Returns adapter speed.
- *
  */
 static inline u8 get_adapter_speed(struct controller *ctrl, u8 hp_slot)
 {
@@ -672,7 +685,8 @@ static inline int get_slot_enabled(struct controller *ctrl, struct slot *slot)
 }
 
 
-static inline int cpq_get_latch_status(struct controller *ctrl, struct slot *slot)
+static inline int cpq_get_latch_status(struct controller *ctrl,
+				       struct slot *slot)
 {
 	u32 status;
 	u8 hp_slot;
@@ -687,7 +701,8 @@ static inline int cpq_get_latch_status(struct controller *ctrl, struct slot *slo
 }
 
 
-static inline int get_presence_status(struct controller *ctrl, struct slot *slot)
+static inline int get_presence_status(struct controller *ctrl,
+				      struct slot *slot)
 {
 	int presence_save = 0;
 	u8 hp_slot;
@@ -696,7 +711,8 @@ static inline int get_presence_status(struct controller *ctrl, struct slot *slot
 	hp_slot = slot->device - ctrl->slot_device_offset;
 
 	tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
-	presence_save = (int) ((((~tempdword) >> 23) | ((~tempdword) >> 15)) >> hp_slot) & 0x02;
+	presence_save = (int) ((((~tempdword) >> 23) | ((~tempdword) >> 15))
+				>> hp_slot) & 0x02;
 
 	return presence_save;
 }
@@ -718,5 +734,12 @@ static inline int wait_for_ctrl_irq(struct controller *ctrl)
 	return retval;
 }
 
-#endif
+#include <asm/pci_x86.h>
+static inline int cpqhp_routing_table_length(void)
+{
+	BUG_ON(cpqhp_routing_table == NULL);
+	return ((cpqhp_routing_table->size - sizeof(struct irq_routing_table)) /
+		sizeof(struct irq_info));
+}
 
+#endif
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index c2e1bcb..075b4f4 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -25,8 +25,7 @@
  * Send feedback to <greg@kroah.com>
  *
  * Jan 12, 2003 -	Added 66/100/133MHz PCI-X support,
- * 			Torben Mathiasen <torben.mathiasen@hp.com>
- *
+ *			Torben Mathiasen <torben.mathiasen@hp.com>
  */
 
 #include <linux/module.h>
@@ -45,7 +44,6 @@
 
 #include "cpqphp.h"
 #include "cpqphp_nvram.h"
-#include <asm/pci_x86.h>
 
 
 /* Global variables */
@@ -53,6 +51,7 @@ int cpqhp_debug;
 int cpqhp_legacy_mode;
 struct controller *cpqhp_ctrl_list;	/* = NULL */
 struct pci_func *cpqhp_slot_list[256];
+struct irq_routing_table *cpqhp_routing_table;
 
 /* local variables */
 static void __iomem *smbios_table;
@@ -78,33 +77,6 @@ MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
 
 #define CPQHPC_MODULE_MINOR 208
 
-static int one_time_init	(void);
-static int set_attention_status	(struct hotplug_slot *slot, u8 value);
-static int process_SI		(struct hotplug_slot *slot);
-static int process_SS		(struct hotplug_slot *slot);
-static int hardware_test	(struct hotplug_slot *slot, u32 value);
-static int get_power_status	(struct hotplug_slot *slot, u8 *value);
-static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
-static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
-static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
-
-static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
-	.owner =		THIS_MODULE,
-	.set_attention_status =	set_attention_status,
-	.enable_slot =		process_SI,
-	.disable_slot =		process_SS,
-	.hardware_test =	hardware_test,
-	.get_power_status =	get_power_status,
-	.get_attention_status =	get_attention_status,
-	.get_latch_status =	get_latch_status,
-	.get_adapter_status =	get_adapter_status,
-  	.get_max_bus_speed =	get_max_bus_speed,
-  	.get_cur_bus_speed =	get_cur_bus_speed,
-};
-
-
 static inline int is_slot64bit(struct slot *slot)
 {
 	return (readb(slot->p_sm_slot + SMBIOS_SLOT_WIDTH) == 0x06) ? 1 : 0;
@@ -144,7 +116,7 @@ static void __iomem * detect_SMBIOS_pointer(void __iomem *begin, void __iomem *e
 			break;
 		}
 	}
-	
+
 	if (!status)
 		fp = NULL;
 
@@ -171,7 +143,7 @@ static int init_SERR(struct controller * ctrl)
 	tempdword = ctrl->first_slot;
 
 	number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
-	// Loop through slots
+	/* Loop through slots */
 	while (number_of_slots) {
 		physical_slot = tempdword;
 		writeb(0, ctrl->hpc_reg + SLOT_SERR);
@@ -182,41 +154,42 @@ static int init_SERR(struct controller * ctrl)
 	return 0;
 }
 
-
-/* nice debugging output */
-static int pci_print_IRQ_route (void)
+static int init_cpqhp_routing_table(void)
 {
-	struct irq_routing_table *routing_table;
 	int len;
-	int loop;
-
-	u8 tbus, tdevice, tslot;
 
-	routing_table = pcibios_get_irq_routing_table();
-	if (routing_table == NULL) {
-		err("No BIOS Routing Table??? Not good\n");
+	cpqhp_routing_table = pcibios_get_irq_routing_table();
+	if (cpqhp_routing_table == NULL)
 		return -ENOMEM;
-	}
 
-	len = (routing_table->size - sizeof(struct irq_routing_table)) /
-			sizeof(struct irq_info);
-	// Make sure I got at least one entry
+	len = cpqhp_routing_table_length();
 	if (len == 0) {
-		kfree(routing_table);
+		kfree(cpqhp_routing_table);
+		cpqhp_routing_table = NULL;
 		return -1;
 	}
 
-	dbg("bus dev func slot\n");
+	return 0;
+}
+
+/* nice debugging output */
+static void pci_print_IRQ_route(void)
+{
+	int len;
+	int loop;
+	u8 tbus, tdevice, tslot;
+
+	len = cpqhp_routing_table_length();
 
+	dbg("bus dev func slot\n");
 	for (loop = 0; loop < len; ++loop) {
-		tbus = routing_table->slots[loop].bus;
-		tdevice = routing_table->slots[loop].devfn;
-		tslot = routing_table->slots[loop].slot;
+		tbus = cpqhp_routing_table->slots[loop].bus;
+		tdevice = cpqhp_routing_table->slots[loop].devfn;
+		tslot = cpqhp_routing_table->slots[loop].slot;
 		dbg("%d %d %d %d\n", tbus, tdevice >> 3, tdevice & 0x7, tslot);
 
 	}
-	kfree(routing_table);
-	return 0;
+	return;
 }
 
 
@@ -242,9 +215,9 @@ static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start,
 	void __iomem *p_max;
 
 	if (!smbios_table || !curr)
-		return(NULL);
+		return NULL;
 
-	// set p_max to the end of the table
+	/* set p_max to the end of the table */
 	p_max = smbios_start + readw(smbios_table + ST_LENGTH);
 
 	p_temp = curr;
@@ -253,20 +226,19 @@ static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start,
 	while ((p_temp < p_max) && !bail) {
 		/* Look for the double NULL terminator
 		 * The first condition is the previous byte
-		 * and the second is the curr */
-		if (!previous_byte && !(readb(p_temp))) {
+		 * and the second is the curr
+		 */
+		if (!previous_byte && !(readb(p_temp)))
 			bail = 1;
-		}
 
 		previous_byte = readb(p_temp);
 		p_temp++;
 	}
 
-	if (p_temp < p_max) {
+	if (p_temp < p_max)
 		return p_temp;
-	} else {
+	else
 		return NULL;
-	}
 }
 
 
@@ -292,21 +264,18 @@ static void __iomem *get_SMBIOS_entry(void __iomem *smbios_start,
 	if (!smbios_table)
 		return NULL;
 
-	if (!previous) {		  
+	if (!previous)
 		previous = smbios_start;
-	} else {
+	else
 		previous = get_subsequent_smbios_entry(smbios_start,
 					smbios_table, previous);
-	}
 
-	while (previous) {
-	       	if (readb(previous + SMBIOS_GENERIC_TYPE) != type) {
+	while (previous)
+		if (readb(previous + SMBIOS_GENERIC_TYPE) != type)
 			previous = get_subsequent_smbios_entry(smbios_start,
 						smbios_table, previous);
-		} else {
+		else
 			break;
-		}
-	}
 
 	return previous;
 }
@@ -322,144 +291,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
 	kfree(slot);
 }
 
-#define SLOT_NAME_SIZE 10
-
-static int ctrl_slot_setup(struct controller *ctrl,
-			void __iomem *smbios_start,
-			void __iomem *smbios_table)
-{
-	struct slot *slot;
-	struct hotplug_slot *hotplug_slot;
-	struct hotplug_slot_info *hotplug_slot_info;
-	u8 number_of_slots;
-	u8 slot_device;
-	u8 slot_number;
-	u8 ctrl_slot;
-	u32 tempdword;
-	char name[SLOT_NAME_SIZE];
-	void __iomem *slot_entry= NULL;
-	int result = -ENOMEM;
-
-	dbg("%s\n", __func__);
-
-	tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
-
-	number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
-	slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
-	slot_number = ctrl->first_slot;
-
-	while (number_of_slots) {
-		slot = kzalloc(sizeof(*slot), GFP_KERNEL);
-		if (!slot)
-			goto error;
-
-		slot->hotplug_slot = kzalloc(sizeof(*(slot->hotplug_slot)),
-						GFP_KERNEL);
-		if (!slot->hotplug_slot)
-			goto error_slot;
-		hotplug_slot = slot->hotplug_slot;
-
-		hotplug_slot->info =
-				kzalloc(sizeof(*(hotplug_slot->info)),
-							GFP_KERNEL);
-		if (!hotplug_slot->info)
-			goto error_hpslot;
-		hotplug_slot_info = hotplug_slot->info;
-
-		slot->ctrl = ctrl;
-		slot->bus = ctrl->bus;
-		slot->device = slot_device;
-		slot->number = slot_number;
-		dbg("slot->number = %u\n", slot->number);
-
-		slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9,
-					slot_entry);
-
-		while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) !=
-				slot->number)) {
-			slot_entry = get_SMBIOS_entry(smbios_start,
-						smbios_table, 9, slot_entry);
-		}
-
-		slot->p_sm_slot = slot_entry;
-
-		init_timer(&slot->task_event);
-		slot->task_event.expires = jiffies + 5 * HZ;
-		slot->task_event.function = cpqhp_pushbutton_thread;
-
-		//FIXME: these capabilities aren't used but if they are
-		//       they need to be correctly implemented
-		slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
-		slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
-
-		if (is_slot64bit(slot))
-			slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
-		if (is_slot66mhz(slot))
-			slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
-		if (ctrl->speed == PCI_SPEED_66MHz)
-			slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
-
-		ctrl_slot =
-			slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
-
-		// Check presence
-		slot->capabilities |=
-			((((~tempdword) >> 23) |
-			 ((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
-		// Check the switch state
-		slot->capabilities |=
-			((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
-		// Check the slot enable
-		slot->capabilities |=
-			((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
-
-		/* register this slot with the hotplug pci core */
-		hotplug_slot->release = &release_slot;
-		hotplug_slot->private = slot;
-		snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
-		hotplug_slot->ops = &cpqphp_hotplug_slot_ops;
-
-		hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot);
-		hotplug_slot_info->attention_status =
-			cpq_get_attention_status(ctrl, slot);
-		hotplug_slot_info->latch_status =
-			cpq_get_latch_status(ctrl, slot);
-		hotplug_slot_info->adapter_status =
-			get_presence_status(ctrl, slot);
-		
-		dbg("registering bus %d, dev %d, number %d, "
-				"ctrl->slot_device_offset %d, slot %d\n",
-				slot->bus, slot->device,
-				slot->number, ctrl->slot_device_offset,
-				slot_number);
-		result = pci_hp_register(hotplug_slot,
-					 ctrl->pci_dev->bus,
-					 slot->device,
-					 name);
-		if (result) {
-			err("pci_hp_register failed with error %d\n", result);
-			goto error_info;
-		}
-		
-		slot->next = ctrl->slot;
-		ctrl->slot = slot;
-
-		number_of_slots--;
-		slot_device++;
-		slot_number++;
-	}
-
-	return 0;
-error_info:
-	kfree(hotplug_slot_info);
-error_hpslot:
-	kfree(hotplug_slot);
-error_slot:
-	kfree(slot);
-error:
-	return result;
-}
-
 static int ctrl_slot_cleanup (struct controller * ctrl)
 {
 	struct slot *old_slot, *next_slot;
@@ -476,36 +307,32 @@ static int ctrl_slot_cleanup (struct controller * ctrl)
 
 	cpqhp_remove_debugfs_files(ctrl);
 
-	//Free IRQ associated with hot plug device
+	/* Free IRQ associated with hot plug device */
 	free_irq(ctrl->interrupt, ctrl);
-	//Unmap the memory
+	/* Unmap the memory */
 	iounmap(ctrl->hpc_reg);
-	//Finally reclaim PCI mem
+	/* Finally reclaim PCI mem */
 	release_mem_region(pci_resource_start(ctrl->pci_dev, 0),
 			   pci_resource_len(ctrl->pci_dev, 0));
 
-	return(0);
+	return 0;
 }
 
 
-//============================================================================
-// function:	get_slot_mapping
-//
-// Description: Attempts to determine a logical slot mapping for a PCI
-//		device.  Won't work for more than one PCI-PCI bridge
-//		in a slot.
-//
-// Input:	u8 bus_num - bus number of PCI device
-//		u8 dev_num - device number of PCI device
-//		u8 *slot - Pointer to u8 where slot number will
-//			be returned
-//
-// Output:	SUCCESS or FAILURE
-//=============================================================================
+/**
+ * get_slot_mapping - determine logical slot mapping for PCI device
+ *
+ * Won't work for more than one PCI-PCI bridge in a slot.
+ *
+ * @bus_num - bus number of PCI device
+ * @dev_num - device number of PCI device
+ * @slot - Pointer to u8 where slot number will	be returned
+ *
+ * Output:	SUCCESS or FAILURE
+ */
 static int
 get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
 {
-	struct irq_routing_table *PCIIRQRoutingInfoLength;
 	u32 work;
 	long len;
 	long loop;
@@ -516,36 +343,25 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
 
 	bridgeSlot = 0xFF;
 
-	PCIIRQRoutingInfoLength = pcibios_get_irq_routing_table();
-	if (!PCIIRQRoutingInfoLength)
-		return -1;
-
-	len = (PCIIRQRoutingInfoLength->size -
-	       sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
-	// Make sure I got at least one entry
-	if (len == 0) {
-		kfree(PCIIRQRoutingInfoLength);
-		return -1;
-	}
-
+	len = cpqhp_routing_table_length();
 	for (loop = 0; loop < len; ++loop) {
-		tbus = PCIIRQRoutingInfoLength->slots[loop].bus;
-		tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn >> 3;
-		tslot = PCIIRQRoutingInfoLength->slots[loop].slot;
+		tbus = cpqhp_routing_table->slots[loop].bus;
+		tdevice = cpqhp_routing_table->slots[loop].devfn >> 3;
+		tslot = cpqhp_routing_table->slots[loop].slot;
 
 		if ((tbus == bus_num) && (tdevice == dev_num)) {
 			*slot = tslot;
-			kfree(PCIIRQRoutingInfoLength);
 			return 0;
 		} else {
 			/* Did not get a match on the target PCI device. Check
-			 * if the current IRQ table entry is a PCI-to-PCI bridge
-			 * device.  If so, and it's secondary bus matches the
-			 * bus number for the target device, I need to save the
-			 * bridge's slot number.  If I can not find an entry for
-			 * the target device, I will have to assume it's on the
-			 * other side of the bridge, and assign it the bridge's
-			 * slot. */
+			 * if the current IRQ table entry is a PCI-to-PCI
+			 * bridge device.  If so, and it's secondary bus
+			 * matches the bus number for the target device, I need
+			 * to save the bridge's slot number.  If I can not find
+			 * an entry for the target device, I will have to
+			 * assume it's on the other side of the bridge, and
+			 * assign it the bridge's slot.
+			 */
 			bus->number = tbus;
 			pci_bus_read_config_dword(bus, PCI_DEVFN(tdevice, 0),
 						PCI_CLASS_REVISION, &work);
@@ -555,25 +371,23 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
 							PCI_DEVFN(tdevice, 0),
 							PCI_PRIMARY_BUS, &work);
 				// See if bridge's secondary bus matches target bus.
-				if (((work >> 8) & 0x000000FF) == (long) bus_num) {
+				if (((work >> 8) & 0x000000FF) == (long) bus_num)
 					bridgeSlot = tslot;
-				}
 			}
 		}
 
 	}
 
-	// If we got here, we didn't find an entry in the IRQ mapping table 
-	// for the target PCI device.  If we did determine that the target 
-	// device is on the other side of a PCI-to-PCI bridge, return the 
-	// slot number for the bridge.
+	/* If we got here, we didn't find an entry in the IRQ mapping table for
+	 * the target PCI device.  If we did determine that the target device
+	 * is on the other side of a PCI-to-PCI bridge, return the slot number
+	 * for the bridge.
+	 */
 	if (bridgeSlot != 0xFF) {
 		*slot = bridgeSlot;
-		kfree(PCIIRQRoutingInfoLength);
 		return 0;
 	}
-	kfree(PCIIRQRoutingInfoLength);
-	// Couldn't find an entry in the routing table for this PCI device
+	/* Couldn't find an entry in the routing table for this PCI device */
 	return -1;
 }
 
@@ -591,32 +405,32 @@ cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func,
 	u8 hp_slot;
 
 	if (func == NULL)
-		return(1);
+		return 1;
 
 	hp_slot = func->device - ctrl->slot_device_offset;
 
-	// Wait for exclusive access to hardware
+	/* Wait for exclusive access to hardware */
 	mutex_lock(&ctrl->crit_sect);
 
-	if (status == 1) {
+	if (status == 1)
 		amber_LED_on (ctrl, hp_slot);
-	} else if (status == 0) {
+	else if (status == 0)
 		amber_LED_off (ctrl, hp_slot);
-	} else {
-		// Done with exclusive hardware access
+	else {
+		/* Done with exclusive hardware access */
 		mutex_unlock(&ctrl->crit_sect);
-		return(1);
+		return 1;
 	}
 
 	set_SOGO(ctrl);
 
-	// Wait for SOBS to be unset
+	/* Wait for SOBS to be unset */
 	wait_for_ctrl_irq (ctrl);
 
-	// Done with exclusive hardware access
+	/* Done with exclusive hardware access */
 	mutex_unlock(&ctrl->crit_sect);
 
-	return(0);
+	return 0;
 }
 
 
@@ -719,7 +533,7 @@ static int hardware_test(struct hotplug_slot *hotplug_slot, u32 value)
 
 	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
-	return cpqhp_hardware_test(ctrl, value);	
+	return cpqhp_hardware_test(ctrl, value);
 }
 
 
@@ -738,7 +552,7 @@ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
 {
 	struct slot *slot = hotplug_slot->private;
 	struct controller *ctrl = slot->ctrl;
-	
+
 	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	*value = cpq_get_attention_status(ctrl, slot);
@@ -793,6 +607,230 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp
 	return 0;
 }
 
+static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
+	.set_attention_status =	set_attention_status,
+	.enable_slot =		process_SI,
+	.disable_slot =		process_SS,
+	.hardware_test =	hardware_test,
+	.get_power_status =	get_power_status,
+	.get_attention_status =	get_attention_status,
+	.get_latch_status =	get_latch_status,
+	.get_adapter_status =	get_adapter_status,
+	.get_max_bus_speed =	get_max_bus_speed,
+	.get_cur_bus_speed =	get_cur_bus_speed,
+};
+
+#define SLOT_NAME_SIZE 10
+
+static int ctrl_slot_setup(struct controller *ctrl,
+			void __iomem *smbios_start,
+			void __iomem *smbios_table)
+{
+	struct slot *slot;
+	struct hotplug_slot *hotplug_slot;
+	struct hotplug_slot_info *hotplug_slot_info;
+	u8 number_of_slots;
+	u8 slot_device;
+	u8 slot_number;
+	u8 ctrl_slot;
+	u32 tempdword;
+	char name[SLOT_NAME_SIZE];
+	void __iomem *slot_entry= NULL;
+	int result = -ENOMEM;
+
+	dbg("%s\n", __func__);
+
+	tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
+
+	number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
+	slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
+	slot_number = ctrl->first_slot;
+
+	while (number_of_slots) {
+		slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+		if (!slot)
+			goto error;
+
+		slot->hotplug_slot = kzalloc(sizeof(*(slot->hotplug_slot)),
+						GFP_KERNEL);
+		if (!slot->hotplug_slot)
+			goto error_slot;
+		hotplug_slot = slot->hotplug_slot;
+
+		hotplug_slot->info = kzalloc(sizeof(*(hotplug_slot->info)),
+							GFP_KERNEL);
+		if (!hotplug_slot->info)
+			goto error_hpslot;
+		hotplug_slot_info = hotplug_slot->info;
+
+		slot->ctrl = ctrl;
+		slot->bus = ctrl->bus;
+		slot->device = slot_device;
+		slot->number = slot_number;
+		dbg("slot->number = %u\n", slot->number);
+
+		slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9,
+					slot_entry);
+
+		while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) !=
+				slot->number)) {
+			slot_entry = get_SMBIOS_entry(smbios_start,
+						smbios_table, 9, slot_entry);
+		}
+
+		slot->p_sm_slot = slot_entry;
+
+		init_timer(&slot->task_event);
+		slot->task_event.expires = jiffies + 5 * HZ;
+		slot->task_event.function = cpqhp_pushbutton_thread;
+
+		/*FIXME: these capabilities aren't used but if they are
+		 *	 they need to be correctly implemented
+		 */
+		slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
+		slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
+
+		if (is_slot64bit(slot))
+			slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
+		if (is_slot66mhz(slot))
+			slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
+		if (ctrl->speed == PCI_SPEED_66MHz)
+			slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
+
+		ctrl_slot =
+			slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
+
+		/* Check presence */
+		slot->capabilities |=
+			((((~tempdword) >> 23) |
+			 ((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
+		/* Check the switch state */
+		slot->capabilities |=
+			((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
+		/* Check the slot enable */
+		slot->capabilities |=
+			((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
+
+		/* register this slot with the hotplug pci core */
+		hotplug_slot->release = &release_slot;
+		hotplug_slot->private = slot;
+		snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
+		hotplug_slot->ops = &cpqphp_hotplug_slot_ops;
+
+		hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot);
+		hotplug_slot_info->attention_status =
+			cpq_get_attention_status(ctrl, slot);
+		hotplug_slot_info->latch_status =
+			cpq_get_latch_status(ctrl, slot);
+		hotplug_slot_info->adapter_status =
+			get_presence_status(ctrl, slot);
+
+		dbg("registering bus %d, dev %d, number %d, "
+				"ctrl->slot_device_offset %d, slot %d\n",
+				slot->bus, slot->device,
+				slot->number, ctrl->slot_device_offset,
+				slot_number);
+		result = pci_hp_register(hotplug_slot,
+					 ctrl->pci_dev->bus,
+					 slot->device,
+					 name);
+		if (result) {
+			err("pci_hp_register failed with error %d\n", result);
+			goto error_info;
+		}
+
+		slot->next = ctrl->slot;
+		ctrl->slot = slot;
+
+		number_of_slots--;
+		slot_device++;
+		slot_number++;
+	}
+
+	return 0;
+error_info:
+	kfree(hotplug_slot_info);
+error_hpslot:
+	kfree(hotplug_slot);
+error_slot:
+	kfree(slot);
+error:
+	return result;
+}
+
+static int one_time_init(void)
+{
+	int loop;
+	int retval = 0;
+
+	if (initialized)
+		return 0;
+
+	power_mode = 0;
+
+	retval = init_cpqhp_routing_table();
+	if (retval)
+		goto error;
+
+	if (cpqhp_debug)
+		pci_print_IRQ_route();
+
+	dbg("Initialize + Start the notification mechanism \n");
+
+	retval = cpqhp_event_start_thread();
+	if (retval)
+		goto error;
+
+	dbg("Initialize slot lists\n");
+	for (loop = 0; loop < 256; loop++)
+		cpqhp_slot_list[loop] = NULL;
+
+	/* FIXME: We also need to hook the NMI handler eventually.
+	 * this also needs to be worked with Christoph
+	 * register_NMI_handler();
+	 */
+	/* Map rom address */
+	cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN);
+	if (!cpqhp_rom_start) {
+		err ("Could not ioremap memory region for ROM\n");
+		retval = -EIO;
+		goto error;
+	}
+
+	/* Now, map the int15 entry point if we are on compaq specific
+	 * hardware
+	 */
+	compaq_nvram_init(cpqhp_rom_start);
+
+	/* Map smbios table entry point structure */
+	smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start,
+					cpqhp_rom_start + ROM_PHY_LEN);
+	if (!smbios_table) {
+		err ("Could not find the SMBIOS pointer in memory\n");
+		retval = -EIO;
+		goto error_rom_start;
+	}
+
+	smbios_start = ioremap(readl(smbios_table + ST_ADDRESS),
+					readw(smbios_table + ST_LENGTH));
+	if (!smbios_start) {
+		err ("Could not ioremap memory region taken from SMBIOS values\n");
+		retval = -EIO;
+		goto error_smbios_start;
+	}
+
+	initialized = 1;
+
+	return retval;
+
+error_smbios_start:
+	iounmap(smbios_start);
+error_rom_start:
+	iounmap(cpqhp_rom_start);
+error:
+	return retval;
+}
+
 static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	u8 num_of_slots = 0;
@@ -815,7 +853,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return err;
 	}
 
-	// Need to read VID early b/c it's used to differentiate CPQ and INTC discovery
+	/* Need to read VID early b/c it's used to differentiate CPQ and INTC
+	 * discovery
+	 */
 	rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id);
 	if (rc || ((vendor_id != PCI_VENDOR_ID_COMPAQ) && (vendor_id != PCI_VENDOR_ID_INTEL))) {
 		err(msg_HPC_non_compaq_or_intel);
@@ -832,217 +872,209 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	/* Check for the proper subsytem ID's
-	 * Intel uses a different SSID programming model than Compaq.  
+	 * Intel uses a different SSID programming model than Compaq.
 	 * For Intel, each SSID bit identifies a PHP capability.
 	 * Also Intel HPC's may have RID=0.
 	 */
-	if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) {
-		// TODO: This code can be made to support non-Compaq or Intel subsystem IDs
-		rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
-		if (rc) {
-			err("%s : pci_read_config_word failed\n", __func__);
-			goto err_disable_device;
-		}
-		dbg("Subsystem Vendor ID: %x\n", subsystem_vid);
-		if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) {
-			err(msg_HPC_non_compaq_or_intel);
-			rc = -ENODEV;
-			goto err_disable_device;
-		}
+	if ((pdev->revision <= 2) && (vendor_id != PCI_VENDOR_ID_INTEL)) {
+		err(msg_HPC_not_supported);
+		return -ENODEV;
+	}
 
-		ctrl = kzalloc(sizeof(struct controller), GFP_KERNEL);
-		if (!ctrl) {
-			err("%s : out of memory\n", __func__);
-			rc = -ENOMEM;
-			goto err_disable_device;
-		}
+	/* TODO: This code can be made to support non-Compaq or Intel
+	 * subsystem IDs
+	 */
+	rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
+	if (rc) {
+		err("%s : pci_read_config_word failed\n", __func__);
+		goto err_disable_device;
+	}
+	dbg("Subsystem Vendor ID: %x\n", subsystem_vid);
+	if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) {
+		err(msg_HPC_non_compaq_or_intel);
+		rc = -ENODEV;
+		goto err_disable_device;
+	}
 
-		rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsystem_deviceid);
-		if (rc) {
-			err("%s : pci_read_config_word failed\n", __func__);
-			goto err_free_ctrl;
-		}
+	ctrl = kzalloc(sizeof(struct controller), GFP_KERNEL);
+	if (!ctrl) {
+		err("%s : out of memory\n", __func__);
+		rc = -ENOMEM;
+		goto err_disable_device;
+	}
 
-		info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid);
-
-		/* Set Vendor ID, so it can be accessed later from other functions */
-		ctrl->vendor_id = vendor_id;
-
-		switch (subsystem_vid) {
-			case PCI_VENDOR_ID_COMPAQ:
-				if (pdev->revision >= 0x13) { /* CIOBX */
-					ctrl->push_flag = 1;
-					ctrl->slot_switch_type = 1;
-					ctrl->push_button = 1;
-					ctrl->pci_config_space = 1;
-					ctrl->defeature_PHP = 1;
-					ctrl->pcix_support = 1;
-					ctrl->pcix_speed_capability = 1;
-					pci_read_config_byte(pdev, 0x41, &bus_cap);
-					if (bus_cap & 0x80) {
-						dbg("bus max supports 133MHz PCI-X\n");
-						ctrl->speed_capability = PCI_SPEED_133MHz_PCIX;
-						break;
-					}
-					if (bus_cap & 0x40) {
-						dbg("bus max supports 100MHz PCI-X\n");
-						ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
-						break;
-					}
-					if (bus_cap & 20) {
-						dbg("bus max supports 66MHz PCI-X\n");
-						ctrl->speed_capability = PCI_SPEED_66MHz_PCIX;
-						break;
-					}
-					if (bus_cap & 10) {
-						dbg("bus max supports 66MHz PCI\n");
-						ctrl->speed_capability = PCI_SPEED_66MHz;
-						break;
-					}
-
-					break;
-				}
-
-				switch (subsystem_deviceid) {
-					case PCI_SUB_HPC_ID:
-						/* Original 6500/7000 implementation */
-						ctrl->slot_switch_type = 1;
-						ctrl->speed_capability = PCI_SPEED_33MHz;
-						ctrl->push_button = 0;
-						ctrl->pci_config_space = 1;
-						ctrl->defeature_PHP = 1;
-						ctrl->pcix_support = 0;
-						ctrl->pcix_speed_capability = 0;
-						break;
-					case PCI_SUB_HPC_ID2:
-						/* First Pushbutton implementation */
-						ctrl->push_flag = 1;
-						ctrl->slot_switch_type = 1;
-						ctrl->speed_capability = PCI_SPEED_33MHz;
-						ctrl->push_button = 1;
-						ctrl->pci_config_space = 1;
-						ctrl->defeature_PHP = 1;
-						ctrl->pcix_support = 0;
-						ctrl->pcix_speed_capability = 0;
-						break;
-					case PCI_SUB_HPC_ID_INTC:
-						/* Third party (6500/7000) */
-						ctrl->slot_switch_type = 1;
-						ctrl->speed_capability = PCI_SPEED_33MHz;
-						ctrl->push_button = 0;
-						ctrl->pci_config_space = 1;
-						ctrl->defeature_PHP = 1;
-						ctrl->pcix_support = 0;
-						ctrl->pcix_speed_capability = 0;
-						break;
-					case PCI_SUB_HPC_ID3:
-						/* First 66 Mhz implementation */
-						ctrl->push_flag = 1;
-						ctrl->slot_switch_type = 1;
-						ctrl->speed_capability = PCI_SPEED_66MHz;
-						ctrl->push_button = 1;
-						ctrl->pci_config_space = 1;
-						ctrl->defeature_PHP = 1;
-						ctrl->pcix_support = 0;
-						ctrl->pcix_speed_capability = 0;
-						break;
-					case PCI_SUB_HPC_ID4:
-						/* First PCI-X implementation, 100MHz */
-						ctrl->push_flag = 1;
-						ctrl->slot_switch_type = 1;
-						ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
-						ctrl->push_button = 1;
-						ctrl->pci_config_space = 1;
-						ctrl->defeature_PHP = 1;
-						ctrl->pcix_support = 1;
-						ctrl->pcix_speed_capability = 0;	
-						break;
-					default:
-						err(msg_HPC_not_supported);
-						rc = -ENODEV;
-						goto err_free_ctrl;
-				}
-				break;
+	rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsystem_deviceid);
+	if (rc) {
+		err("%s : pci_read_config_word failed\n", __func__);
+		goto err_free_ctrl;
+	}
 
-			case PCI_VENDOR_ID_INTEL:
-				/* Check for speed capability (0=33, 1=66) */
-				if (subsystem_deviceid & 0x0001) {
-					ctrl->speed_capability = PCI_SPEED_66MHz;
-				} else {
-					ctrl->speed_capability = PCI_SPEED_33MHz;
-				}
-
-				/* Check for push button */
-				if (subsystem_deviceid & 0x0002) {
-					/* no push button */
-					ctrl->push_button = 0;
-				} else {
-					/* push button supported */
-					ctrl->push_button = 1;
-				}
-
-				/* Check for slot switch type (0=mechanical, 1=not mechanical) */
-				if (subsystem_deviceid & 0x0004) {
-					/* no switch */
-					ctrl->slot_switch_type = 0;
-				} else {
-					/* switch */
-					ctrl->slot_switch_type = 1;
-				}
-
-				/* PHP Status (0=De-feature PHP, 1=Normal operation) */
-				if (subsystem_deviceid & 0x0008) {
-					ctrl->defeature_PHP = 1;	// PHP supported
-				} else {
-					ctrl->defeature_PHP = 0;	// PHP not supported
-				}
-
-				/* Alternate Base Address Register Interface (0=not supported, 1=supported) */
-				if (subsystem_deviceid & 0x0010) {
-					ctrl->alternate_base_address = 1;	// supported
-				} else {
-					ctrl->alternate_base_address = 0;	// not supported
-				}
-
-				/* PCI Config Space Index (0=not supported, 1=supported) */
-				if (subsystem_deviceid & 0x0020) {
-					ctrl->pci_config_space = 1;		// supported
-				} else {
-					ctrl->pci_config_space = 0;		// not supported
-				}
-
-				/* PCI-X support */
-				if (subsystem_deviceid & 0x0080) {
-					/* PCI-X capable */
-					ctrl->pcix_support = 1;
-					/* Frequency of operation in PCI-X mode */
-					if (subsystem_deviceid & 0x0040) {
-						/* 133MHz PCI-X if bit 7 is 1 */
-						ctrl->pcix_speed_capability = 1;
-					} else {
-						/* 100MHz PCI-X if bit 7 is 1 and bit 0 is 0, */
-						/* 66MHz PCI-X if bit 7 is 1 and bit 0 is 1 */
-						ctrl->pcix_speed_capability = 0;
-					}
-				} else {
-					/* Conventional PCI */
-					ctrl->pcix_support = 0;
-					ctrl->pcix_speed_capability = 0;
-				}
+	info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid);
+
+	/* Set Vendor ID, so it can be accessed later from other
+	 * functions
+	 */
+	ctrl->vendor_id = vendor_id;
+
+	switch (subsystem_vid) {
+	case PCI_VENDOR_ID_COMPAQ:
+		if (pdev->revision >= 0x13) { /* CIOBX */
+			ctrl->push_flag = 1;
+			ctrl->slot_switch_type = 1;
+			ctrl->push_button = 1;
+			ctrl->pci_config_space = 1;
+			ctrl->defeature_PHP = 1;
+			ctrl->pcix_support = 1;
+			ctrl->pcix_speed_capability = 1;
+			pci_read_config_byte(pdev, 0x41, &bus_cap);
+			if (bus_cap & 0x80) {
+				dbg("bus max supports 133MHz PCI-X\n");
+				ctrl->speed_capability = PCI_SPEED_133MHz_PCIX;
 				break;
+			}
+			if (bus_cap & 0x40) {
+				dbg("bus max supports 100MHz PCI-X\n");
+				ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+				break;
+			}
+			if (bus_cap & 20) {
+				dbg("bus max supports 66MHz PCI-X\n");
+				ctrl->speed_capability = PCI_SPEED_66MHz_PCIX;
+				break;
+			}
+			if (bus_cap & 10) {
+				dbg("bus max supports 66MHz PCI\n");
+				ctrl->speed_capability = PCI_SPEED_66MHz;
+				break;
+			}
+
+			break;
+		}
 
-			default:
-				err(msg_HPC_not_supported);
-				rc = -ENODEV;
-				goto err_free_ctrl;
+		switch (subsystem_deviceid) {
+		case PCI_SUB_HPC_ID:
+			/* Original 6500/7000 implementation */
+			ctrl->slot_switch_type = 1;
+			ctrl->speed_capability = PCI_SPEED_33MHz;
+			ctrl->push_button = 0;
+			ctrl->pci_config_space = 1;
+			ctrl->defeature_PHP = 1;
+			ctrl->pcix_support = 0;
+			ctrl->pcix_speed_capability = 0;
+			break;
+		case PCI_SUB_HPC_ID2:
+			/* First Pushbutton implementation */
+			ctrl->push_flag = 1;
+			ctrl->slot_switch_type = 1;
+			ctrl->speed_capability = PCI_SPEED_33MHz;
+			ctrl->push_button = 1;
+			ctrl->pci_config_space = 1;
+			ctrl->defeature_PHP = 1;
+			ctrl->pcix_support = 0;
+			ctrl->pcix_speed_capability = 0;
+			break;
+		case PCI_SUB_HPC_ID_INTC:
+			/* Third party (6500/7000) */
+			ctrl->slot_switch_type = 1;
+			ctrl->speed_capability = PCI_SPEED_33MHz;
+			ctrl->push_button = 0;
+			ctrl->pci_config_space = 1;
+			ctrl->defeature_PHP = 1;
+			ctrl->pcix_support = 0;
+			ctrl->pcix_speed_capability = 0;
+			break;
+		case PCI_SUB_HPC_ID3:
+			/* First 66 Mhz implementation */
+			ctrl->push_flag = 1;
+			ctrl->slot_switch_type = 1;
+			ctrl->speed_capability = PCI_SPEED_66MHz;
+			ctrl->push_button = 1;
+			ctrl->pci_config_space = 1;
+			ctrl->defeature_PHP = 1;
+			ctrl->pcix_support = 0;
+			ctrl->pcix_speed_capability = 0;
+			break;
+		case PCI_SUB_HPC_ID4:
+			/* First PCI-X implementation, 100MHz */
+			ctrl->push_flag = 1;
+			ctrl->slot_switch_type = 1;
+			ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+			ctrl->push_button = 1;
+			ctrl->pci_config_space = 1;
+			ctrl->defeature_PHP = 1;
+			ctrl->pcix_support = 1;
+			ctrl->pcix_speed_capability = 0;
+			break;
+		default:
+			err(msg_HPC_not_supported);
+			rc = -ENODEV;
+			goto err_free_ctrl;
 		}
+		break;
+
+	case PCI_VENDOR_ID_INTEL:
+		/* Check for speed capability (0=33, 1=66) */
+		if (subsystem_deviceid & 0x0001)
+			ctrl->speed_capability = PCI_SPEED_66MHz;
+		else
+			ctrl->speed_capability = PCI_SPEED_33MHz;
+
+		/* Check for push button */
+		if (subsystem_deviceid & 0x0002)
+			ctrl->push_button = 0;
+		else
+			ctrl->push_button = 1;
+
+		/* Check for slot switch type (0=mechanical, 1=not mechanical) */
+		if (subsystem_deviceid & 0x0004)
+			ctrl->slot_switch_type = 0;
+		else
+			ctrl->slot_switch_type = 1;
+
+		/* PHP Status (0=De-feature PHP, 1=Normal operation) */
+		if (subsystem_deviceid & 0x0008)
+			ctrl->defeature_PHP = 1;	/* PHP supported */
+		else
+			ctrl->defeature_PHP = 0;	/* PHP not supported */
+
+		/* Alternate Base Address Register Interface
+		 * (0=not supported, 1=supported)
+		 */
+		if (subsystem_deviceid & 0x0010)
+			ctrl->alternate_base_address = 1;
+		else
+			ctrl->alternate_base_address = 0;
+
+		/* PCI Config Space Index (0=not supported, 1=supported) */
+		if (subsystem_deviceid & 0x0020)
+			ctrl->pci_config_space = 1;
+		else
+			ctrl->pci_config_space = 0;
+
+		/* PCI-X support */
+		if (subsystem_deviceid & 0x0080) {
+			ctrl->pcix_support = 1;
+			if (subsystem_deviceid & 0x0040)
+				/* 133MHz PCI-X if bit 7 is 1 */
+				ctrl->pcix_speed_capability = 1;
+			else
+				/* 100MHz PCI-X if bit 7 is 1 and bit 0 is 0, */
+				/* 66MHz PCI-X if bit 7 is 1 and bit 0 is 1 */
+				ctrl->pcix_speed_capability = 0;
+		} else {
+			/* Conventional PCI */
+			ctrl->pcix_support = 0;
+			ctrl->pcix_speed_capability = 0;
+		}
+		break;
 
-	} else {
+	default:
 		err(msg_HPC_not_supported);
-		return -ENODEV;
+		rc = -ENODEV;
+		goto err_free_ctrl;
 	}
 
-	// Tell the user that we found one.
+	/* Tell the user that we found one. */
 	info("Initializing the PCI hot plug controller residing on PCI bus %d\n",
 					pdev->bus->number);
 
@@ -1087,7 +1119,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc) {
 		goto err_free_bus;
 	}
-	
+
 	dbg("pdev = %p\n", pdev);
 	dbg("pci resource start %llx\n", (unsigned long long)pci_resource_start(pdev, 0));
 	dbg("pci resource len %llx\n", (unsigned long long)pci_resource_len(pdev, 0));
@@ -1109,7 +1141,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_free_mem_region;
 	}
 
-	// Check for 66Mhz operation
+	/* Check for 66Mhz operation */
 	ctrl->speed = get_controller_speed(ctrl);
 
 
@@ -1120,7 +1152,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 *
 	 ********************************************************/
 
-	// find the physical slot number of the first hot plug slot
+	/* find the physical slot number of the first hot plug slot */
 
 	/* Get slot won't work for devices behind bridges, but
 	 * in this case it will always be called for the "base"
@@ -1137,7 +1169,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_iounmap;
 	}
 
-	// Store PCI Config Space for all devices on this bus
+	/* Store PCI Config Space for all devices on this bus */
 	rc = cpqhp_save_config(ctrl, ctrl->bus, readb(ctrl->hpc_reg + SLOT_MASK));
 	if (rc) {
 		err("%s: unable to save PCI configuration data, error %d\n",
@@ -1148,7 +1180,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/*
 	 * Get IO, memory, and IRQ resources for new devices
 	 */
-	// The next line is required for cpqhp_find_available_resources
+	/* The next line is required for cpqhp_find_available_resources */
 	ctrl->interrupt = pdev->irq;
 	if (ctrl->interrupt < 0x10) {
 		cpqhp_legacy_mode = 1;
@@ -1182,7 +1214,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			__func__, rc);
 		goto err_iounmap;
 	}
-	
+
 	/* Mask all general input interrupts */
 	writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_MASK);
 
@@ -1196,12 +1228,14 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_iounmap;
 	}
 
-	/* Enable Shift Out interrupt and clear it, also enable SERR on power fault */
+	/* Enable Shift Out interrupt and clear it, also enable SERR on power
+	 * fault
+	 */
 	temp_word = readw(ctrl->hpc_reg + MISC);
 	temp_word |= 0x4006;
 	writew(temp_word, ctrl->hpc_reg + MISC);
 
-	// Changed 05/05/97 to clear all interrupts at start
+	/* Changed 05/05/97 to clear all interrupts at start */
 	writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_INPUT_CLEAR);
 
 	ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
@@ -1216,13 +1250,14 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		cpqhp_ctrl_list = ctrl;
 	}
 
-	// turn off empty slots here unless command line option "ON" set
-	// Wait for exclusive access to hardware
+	/* turn off empty slots here unless command line option "ON" set
+	 * Wait for exclusive access to hardware
+	 */
 	mutex_lock(&ctrl->crit_sect);
 
 	num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
 
-	// find first device number for the ctrl
+	/* find first device number for the ctrl */
 	device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
 
 	while (num_of_slots) {
@@ -1234,23 +1269,21 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		hp_slot = func->device - ctrl->slot_device_offset;
 		dbg("hp_slot: %d\n", hp_slot);
 
-		// We have to save the presence info for these slots
+		/* We have to save the presence info for these slots */
 		temp_word = ctrl->ctrl_int_comp >> 16;
 		func->presence_save = (temp_word >> hp_slot) & 0x01;
 		func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
 
-		if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
+		if (ctrl->ctrl_int_comp & (0x1L << hp_slot))
 			func->switch_save = 0;
-		} else {
+		else
 			func->switch_save = 0x10;
-		}
 
-		if (!power_mode) {
+		if (!power_mode)
 			if (!func->is_a_board) {
 				green_LED_off(ctrl, hp_slot);
 				slot_disable(ctrl, hp_slot);
 			}
-		}
 
 		device++;
 		num_of_slots--;
@@ -1258,7 +1291,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	if (!power_mode) {
 		set_SOGO(ctrl);
-		// Wait for SOBS to be unset
+		/* Wait for SOBS to be unset */
 		wait_for_ctrl_irq(ctrl);
 	}
 
@@ -1269,7 +1302,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_free_irq;
 	}
 
-	// Done with exclusive hardware access
+	/* Done with exclusive hardware access */
 	mutex_unlock(&ctrl->crit_sect);
 
 	cpqhp_create_debugfs_files(ctrl);
@@ -1291,77 +1324,6 @@ err_disable_device:
 	return rc;
 }
 
-
-static int one_time_init(void)
-{
-	int loop;
-	int retval = 0;
-
-	if (initialized)
-		return 0;
-
-	power_mode = 0;
-
-	retval = pci_print_IRQ_route();
-	if (retval)
-		goto error;
-
-	dbg("Initialize + Start the notification mechanism \n");
-
-	retval = cpqhp_event_start_thread();
-	if (retval)
-		goto error;
-
-	dbg("Initialize slot lists\n");
-	for (loop = 0; loop < 256; loop++) {
-		cpqhp_slot_list[loop] = NULL;
-	}
-
-	// FIXME: We also need to hook the NMI handler eventually.
-	// this also needs to be worked with Christoph
-	// register_NMI_handler();
-
-	// Map rom address
-	cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN);
-	if (!cpqhp_rom_start) {
-		err ("Could not ioremap memory region for ROM\n");
-		retval = -EIO;
-		goto error;
-	}
-	
-	/* Now, map the int15 entry point if we are on compaq specific hardware */
-	compaq_nvram_init(cpqhp_rom_start);
-	
-	/* Map smbios table entry point structure */
-	smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start,
-					cpqhp_rom_start + ROM_PHY_LEN);
-	if (!smbios_table) {
-		err ("Could not find the SMBIOS pointer in memory\n");
-		retval = -EIO;
-		goto error_rom_start;
-	}
-
-	smbios_start = ioremap(readl(smbios_table + ST_ADDRESS),
-					readw(smbios_table + ST_LENGTH));
-	if (!smbios_start) {
-		err ("Could not ioremap memory region taken from SMBIOS values\n");
-		retval = -EIO;
-		goto error_smbios_start;
-	}
-
-	initialized = 1;
-
-	return retval;
-
-error_smbios_start:
-	iounmap(smbios_start);
-error_rom_start:
-	iounmap(cpqhp_rom_start);
-error:
-	return retval;
-}
-
-
 static void __exit unload_cpqphpd(void)
 {
 	struct pci_func *next;
@@ -1381,10 +1343,10 @@ static void __exit unload_cpqphpd(void)
 		if (ctrl->hpc_reg) {
 			u16 misc;
 			rc = read_slot_enable (ctrl);
-			
+
 			writeb(0, ctrl->hpc_reg + SLOT_SERR);
 			writel(0xFFFFFFC0L | ~rc, ctrl->hpc_reg + INT_MASK);
-			
+
 			misc = readw(ctrl->hpc_reg + MISC);
 			misc &= 0xFFFD;
 			writew(misc, ctrl->hpc_reg + MISC);
@@ -1464,38 +1426,34 @@ static void __exit unload_cpqphpd(void)
 		}
 	}
 
-	// Stop the notification mechanism
+	/* Stop the notification mechanism */
 	if (initialized)
 		cpqhp_event_stop_thread();
 
-	//unmap the rom address
+	/* unmap the rom address */
 	if (cpqhp_rom_start)
 		iounmap(cpqhp_rom_start);
 	if (smbios_start)
 		iounmap(smbios_start);
 }
 
-
-
 static struct pci_device_id hpcd_pci_tbl[] = {
 	{
 	/* handle any PCI Hotplug controller */
 	.class =        ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00),
 	.class_mask =   ~0,
-	
+
 	/* no matter who makes it */
 	.vendor =       PCI_ANY_ID,
 	.device =       PCI_ANY_ID,
 	.subvendor =    PCI_ANY_ID,
 	.subdevice =    PCI_ANY_ID,
-	
+
 	}, { /* end: all zeroes */ }
 };
 
 MODULE_DEVICE_TABLE(pci, hpcd_pci_tbl);
 
-
-
 static struct pci_driver cpqhpc_driver = {
 	.name =		"compaq_pci_hotplug",
 	.id_table =	hpcd_pci_tbl,
@@ -1503,8 +1461,6 @@ static struct pci_driver cpqhpc_driver = {
 	/* remove:	cpqhpc_remove_one, */
 };
 
-
-
 static int __init cpqhpc_init(void)
 {
 	int result;
@@ -1518,7 +1474,6 @@ static int __init cpqhpc_init(void)
 	return result;
 }
 
-
 static void __exit cpqhpc_cleanup(void)
 {
 	dbg("unload_cpqphpd()\n");
@@ -1529,8 +1484,5 @@ static void __exit cpqhpc_cleanup(void)
 	cpqhp_shutdown_debugfs();
 }
 
-
 module_init(cpqhpc_init);
 module_exit(cpqhpc_cleanup);
-
-
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index cc227a8..2fa47af 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -81,14 +81,15 @@ static u8 handle_switch_change(u8 change, struct controller * ctrl)
 
 	for (hp_slot = 0; hp_slot < 6; hp_slot++) {
 		if (change & (0x1L << hp_slot)) {
-			/**********************************
+			/*
 			 * this one changed.
-			 **********************************/
+			 */
 			func = cpqhp_slot_find(ctrl->bus,
 				(hp_slot + ctrl->slot_device_offset), 0);
 
 			/* this is the structure that tells the worker thread
-			 *what to do */
+			 * what to do
+			 */
 			taskInfo = &(ctrl->event_queue[ctrl->next_event]);
 			ctrl->next_event = (ctrl->next_event + 1) % 10;
 			taskInfo->hp_slot = hp_slot;
@@ -100,17 +101,17 @@ static u8 handle_switch_change(u8 change, struct controller * ctrl)
 			func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
 
 			if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
-				/**********************************
+				/*
 				 * Switch opened
-				 **********************************/
+				 */
 
 				func->switch_save = 0;
 
 				taskInfo->event_type = INT_SWITCH_OPEN;
 			} else {
-				/**********************************
+				/*
 				 * Switch closed
-				 **********************************/
+				 */
 
 				func->switch_save = 0x10;
 
@@ -131,9 +132,8 @@ static struct slot *cpqhp_find_slot(struct controller *ctrl, u8 device)
 {
 	struct slot *slot = ctrl->slot;
 
-	while (slot && (slot->device != device)) {
+	while (slot && (slot->device != device))
 		slot = slot->next;
-	}
 
 	return slot;
 }
@@ -152,17 +152,17 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl)
 	if (!change)
 		return 0;
 
-	/**********************************
+	/*
 	 * Presence Change
-	 **********************************/
+	 */
 	dbg("cpqsbd:  Presence/Notify input change.\n");
 	dbg("         Changed bits are 0x%4.4x\n", change );
 
 	for (hp_slot = 0; hp_slot < 6; hp_slot++) {
 		if (change & (0x0101 << hp_slot)) {
-			/**********************************
+			/*
 			 * this one changed.
-			 **********************************/
+			 */
 			func = cpqhp_slot_find(ctrl->bus,
 				(hp_slot + ctrl->slot_device_offset), 0);
 
@@ -177,22 +177,23 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl)
 				return 0;
 
 			/* If the switch closed, must be a button
-			 * If not in button mode, nevermind */
+			 * If not in button mode, nevermind
+			 */
 			if (func->switch_save && (ctrl->push_button == 1)) {
 				temp_word = ctrl->ctrl_int_comp >> 16;
 				temp_byte = (temp_word >> hp_slot) & 0x01;
 				temp_byte |= (temp_word >> (hp_slot + 7)) & 0x02;
 
 				if (temp_byte != func->presence_save) {
-					/**************************************
+					/*
 					 * button Pressed (doesn't do anything)
-					 **************************************/
+					 */
 					dbg("hp_slot %d button pressed\n", hp_slot);
 					taskInfo->event_type = INT_BUTTON_PRESS;
 				} else {
-					/**********************************
+					/*
 					 * button Released - TAKE ACTION!!!!
-					 **********************************/
+					 */
 					dbg("hp_slot %d button released\n", hp_slot);
 					taskInfo->event_type = INT_BUTTON_RELEASE;
 
@@ -210,7 +211,8 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl)
 				}
 			} else {
 				/* Switch is open, assume a presence change
-				 * Save the presence state */
+				 * Save the presence state
+				 */
 				temp_word = ctrl->ctrl_int_comp >> 16;
 				func->presence_save = (temp_word >> hp_slot) & 0x01;
 				func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
@@ -241,17 +243,17 @@ static u8 handle_power_fault(u8 change, struct controller * ctrl)
 	if (!change)
 		return 0;
 
-	/**********************************
+	/*
 	 * power fault
-	 **********************************/
+	 */
 
 	info("power fault interrupt\n");
 
 	for (hp_slot = 0; hp_slot < 6; hp_slot++) {
 		if (change & (0x01 << hp_slot)) {
-			/**********************************
+			/*
 			 * this one changed.
-			 **********************************/
+			 */
 			func = cpqhp_slot_find(ctrl->bus,
 				(hp_slot + ctrl->slot_device_offset), 0);
 
@@ -262,16 +264,16 @@ static u8 handle_power_fault(u8 change, struct controller * ctrl)
 			rc++;
 
 			if (ctrl->ctrl_int_comp & (0x00000100 << hp_slot)) {
-				/**********************************
+				/*
 				 * power fault Cleared
-				 **********************************/
+				 */
 				func->status = 0x00;
 
 				taskInfo->event_type = INT_POWER_FAULT_CLEAR;
 			} else {
-				/**********************************
+				/*
 				 * power fault
-				 **********************************/
+				 */
 				taskInfo->event_type = INT_POWER_FAULT;
 
 				if (ctrl->rev < 4) {
@@ -432,13 +434,15 @@ static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **h
 
 
 	/* If we got here, there the bridge requires some of the resource, but
-	 * we may be able to split some off of the front */
+	 * we may be able to split some off of the front
+	 */
 
 	node = *head;
 
 	if (node->length & (alignment -1)) {
 		/* this one isn't an aligned length, so we'll make a new entry
-		 * and split it up. */
+		 * and split it up.
+		 */
 		split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 
 		if (!split_node)
@@ -544,10 +548,10 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
 	if (!(*head))
 		return NULL;
 
-	if ( cpqhp_resource_sort_and_combine(head) )
+	if (cpqhp_resource_sort_and_combine(head))
 		return NULL;
 
-	if ( sort_by_size(head) )
+	if (sort_by_size(head))
 		return NULL;
 
 	for (node = *head; node; node = node->next) {
@@ -556,7 +560,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
 
 		if (node->base & (size - 1)) {
 			/* this one isn't base aligned properly
-			 * so we'll make a new entry and split it up */
+			 * so we'll make a new entry and split it up
+			 */
 			temp_dword = (node->base | (size-1)) + 1;
 
 			/* Short circuit if adjusted size is too small */
@@ -581,7 +586,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
 		/* Don't need to check if too small since we already did */
 		if (node->length > size) {
 			/* this one is longer than we need
-			 * so we'll make a new entry and split it up */
+			 * so we'll make a new entry and split it up
+			 */
 			split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 
 			if (!split_node)
@@ -601,7 +607,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size
 			continue;
 
 		/* If we got here, then it is the right size
-		 * Now take it out of the list and break */
+		 * Now take it out of the list and break
+		 */
 		if (*head == node) {
 			*head = node->next;
 		} else {
@@ -642,14 +649,16 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz
 		return NULL;
 
 	for (max = *head; max; max = max->next) {
-		/* If not big enough we could probably just bail, 
-		 * instead we'll continue to the next. */
+		/* If not big enough we could probably just bail,
+		 * instead we'll continue to the next.
+		 */
 		if (max->length < size)
 			continue;
 
 		if (max->base & (size - 1)) {
 			/* this one isn't base aligned properly
-			 * so we'll make a new entry and split it up */
+			 * so we'll make a new entry and split it up
+			 */
 			temp_dword = (max->base | (size-1)) + 1;
 
 			/* Short circuit if adjusted size is too small */
@@ -672,7 +681,8 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz
 
 		if ((max->base + max->length) & (size - 1)) {
 			/* this one isn't end aligned properly at the top
-			 * so we'll make a new entry and split it up */
+			 * so we'll make a new entry and split it up
+			 */
 			split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 
 			if (!split_node)
@@ -744,7 +754,8 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
 		if (node->base & (size - 1)) {
 			dbg("%s: not aligned\n", __func__);
 			/* this one isn't base aligned properly
-			 * so we'll make a new entry and split it up */
+			 * so we'll make a new entry and split it up
+			 */
 			temp_dword = (node->base | (size-1)) + 1;
 
 			/* Short circuit if adjusted size is too small */
@@ -769,7 +780,8 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
 		if (node->length > size) {
 			dbg("%s: too big\n", __func__);
 			/* this one is longer than we need
-			 * so we'll make a new entry and split it up */
+			 * so we'll make a new entry and split it up
+			 */
 			split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
 
 			if (!split_node)
@@ -886,19 +898,19 @@ irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data)
 	u32 Diff;
 	u32 temp_dword;
 
-	
+
 	misc = readw(ctrl->hpc_reg + MISC);
-	/***************************************
+	/*
 	 * Check to see if it was our interrupt
-	 ***************************************/
+	 */
 	if (!(misc & 0x000C)) {
 		return IRQ_NONE;
 	}
 
 	if (misc & 0x0004) {
-		/**********************************
+		/*
 		 * Serial Output interrupt Pending
-		 **********************************/
+		 */
 
 		/* Clear the interrupt */
 		misc |= 0x0004;
@@ -961,11 +973,8 @@ struct pci_func *cpqhp_slot_create(u8 busnumber)
 	struct pci_func *next;
 
 	new_slot = kzalloc(sizeof(*new_slot), GFP_KERNEL);
-	if (new_slot == NULL) {
-		/* I'm not dead yet!
-		 * You will be. */
+	if (new_slot == NULL)
 		return new_slot;
-	}
 
 	new_slot->next = NULL;
 	new_slot->configured = 1;
@@ -996,10 +1005,8 @@ static int slot_remove(struct pci_func * old_slot)
 		return 1;
 
 	next = cpqhp_slot_list[old_slot->bus];
-
-	if (next == NULL) {
+	if (next == NULL)
 		return 1;
-	}
 
 	if (next == old_slot) {
 		cpqhp_slot_list[old_slot->bus] = old_slot->next;
@@ -1008,9 +1015,8 @@ static int slot_remove(struct pci_func * old_slot)
 		return 0;
 	}
 
-	while ((next->next != old_slot) && (next->next != NULL)) {
+	while ((next->next != old_slot) && (next->next != NULL))
 		next = next->next;
-	}
 
 	if (next->next == old_slot) {
 		next->next = old_slot->next;
@@ -1040,9 +1046,8 @@ static int bridge_slot_remove(struct pci_func *bridge)
 	for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) {
 		next = cpqhp_slot_list[tempBus];
 
-		while (!slot_remove(next)) {
+		while (!slot_remove(next))
 			next = cpqhp_slot_list[tempBus];
-		}
 	}
 
 	next = cpqhp_slot_list[bridge->bus];
@@ -1130,39 +1135,43 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 	u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER);
 	u16 reg16;
 	u32 leds = readl(ctrl->hpc_reg + LED_CONTROL);
-	
+
 	if (ctrl->speed == adapter_speed)
 		return 0;
-	
+
 	/* We don't allow freq/mode changes if we find another adapter running
-	 * in another slot on this controller */
+	 * in another slot on this controller
+	 */
 	for(slot = ctrl->slot; slot; slot = slot->next) {
-		if (slot->device == (hp_slot + ctrl->slot_device_offset)) 
+		if (slot->device == (hp_slot + ctrl->slot_device_offset))
 			continue;
 		if (!slot->hotplug_slot || !slot->hotplug_slot->info)
 			continue;
-		if (slot->hotplug_slot->info->adapter_status == 0) 
+		if (slot->hotplug_slot->info->adapter_status == 0)
 			continue;
 		/* If another adapter is running on the same segment but at a
 		 * lower speed/mode, we allow the new adapter to function at
-		 * this rate if supported */
-		if (ctrl->speed < adapter_speed) 
+		 * this rate if supported
+		 */
+		if (ctrl->speed < adapter_speed)
 			return 0;
 
 		return 1;
 	}
-	
+
 	/* If the controller doesn't support freq/mode changes and the
-	 * controller is running at a higher mode, we bail */
+	 * controller is running at a higher mode, we bail
+	 */
 	if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability))
 		return 1;
-	
+
 	/* But we allow the adapter to run at a lower rate if possible */
 	if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability))
 		return 0;
 
 	/* We try to set the max speed supported by both the adapter and
-	 * controller */
+	 * controller
+	 */
 	if (ctrl->speed_capability < adapter_speed) {
 		if (ctrl->speed == ctrl->speed_capability)
 			return 0;
@@ -1171,22 +1180,22 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 
 	writel(0x0L, ctrl->hpc_reg + LED_CONTROL);
 	writeb(0x00, ctrl->hpc_reg + SLOT_ENABLE);
-	
-	set_SOGO(ctrl); 
+
+	set_SOGO(ctrl);
 	wait_for_ctrl_irq(ctrl);
-	
+
 	if (adapter_speed != PCI_SPEED_133MHz_PCIX)
 		reg = 0xF5;
 	else
-		reg = 0xF4;	
+		reg = 0xF4;
 	pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
-	
+
 	reg16 = readw(ctrl->hpc_reg + NEXT_CURR_FREQ);
 	reg16 &= ~0x000F;
 	switch(adapter_speed) {
-		case(PCI_SPEED_133MHz_PCIX): 
+		case(PCI_SPEED_133MHz_PCIX):
 			reg = 0x75;
-			reg16 |= 0xB; 
+			reg16 |= 0xB;
 			break;
 		case(PCI_SPEED_100MHz_PCIX):
 			reg = 0x74;
@@ -1203,48 +1212,48 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 		default: /* 33MHz PCI 2.2 */
 			reg = 0x71;
 			break;
-			
+
 	}
 	reg16 |= 0xB << 12;
 	writew(reg16, ctrl->hpc_reg + NEXT_CURR_FREQ);
-	
-	mdelay(5); 
-	
+
+	mdelay(5);
+
 	/* Reenable interrupts */
 	writel(0, ctrl->hpc_reg + INT_MASK);
 
-	pci_write_config_byte(ctrl->pci_dev, 0x41, reg); 
-	
+	pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
+
 	/* Restart state machine */
 	reg = ~0xF;
 	pci_read_config_byte(ctrl->pci_dev, 0x43, &reg);
 	pci_write_config_byte(ctrl->pci_dev, 0x43, reg);
-	
+
 	/* Only if mode change...*/
 	if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
 		((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) 
 			set_SOGO(ctrl);
-	
+
 	wait_for_ctrl_irq(ctrl);
 	mdelay(1100);
-	
+
 	/* Restore LED/Slot state */
 	writel(leds, ctrl->hpc_reg + LED_CONTROL);
 	writeb(slot_power, ctrl->hpc_reg + SLOT_ENABLE);
-	
+
 	set_SOGO(ctrl);
 	wait_for_ctrl_irq(ctrl);
 
 	ctrl->speed = adapter_speed;
 	slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
-	info("Successfully changed frequency/mode for adapter in slot %d\n", 
+	info("Successfully changed frequency/mode for adapter in slot %d\n",
 			slot->number);
 	return 0;
 }
 
-/* the following routines constitute the bulk of the 
-   hotplug controller logic
+/* the following routines constitute the bulk of the
+ * hotplug controller logic
  */
 
 
@@ -1268,17 +1277,17 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
 
 	hp_slot = func->device - ctrl->slot_device_offset;
 
-	if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot)) {
-		/**********************************
-		 * The switch is open.
-		 **********************************/
+	/*
+	 * The switch is open.
+	 */
+	if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot))
 		rc = INTERLOCK_OPEN;
-	} else if (is_slot_enabled (ctrl, hp_slot)) {
-		/**********************************
-		 * The board is already on
-		 **********************************/
+	/*
+	 * The board is already on
+	 */
+	else if (is_slot_enabled (ctrl, hp_slot))
 		rc = CARD_FUNCTIONING;
-	} else {
+	else {
 		mutex_lock(&ctrl->crit_sect);
 
 		/* turn on board without attaching to the bus */
@@ -1299,7 +1308,7 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
 
 		/* Wait for SOBS to be unset */
 		wait_for_ctrl_irq (ctrl);
-		
+
 		adapter_speed = get_adapter_speed(ctrl, hp_slot);
 		if (ctrl->speed != adapter_speed)
 			if (set_controller_speed(ctrl, adapter_speed, hp_slot))
@@ -1352,7 +1361,8 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
 			 * Get slot won't work for devices behind
 			 * bridges, but in this case it will always be
 			 * called for the "base" bus/dev/func of an
-			 * adapter. */
+			 * adapter.
+			 */
 
 			mutex_lock(&ctrl->crit_sect);
 
@@ -1377,7 +1387,8 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
 
 			 * Get slot won't work for devices behind bridges, but
 			 * in this case it will always be called for the "base"
-			 * bus/dev/func of an adapter. */
+			 * bus/dev/func of an adapter.
+			 */
 
 			mutex_lock(&ctrl->crit_sect);
 
@@ -1434,7 +1445,8 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
 	wait_for_ctrl_irq (ctrl);
 
 	/* Change bits in slot power register to force another shift out
-	 * NOTE: this is to work around the timer bug */
+	 * NOTE: this is to work around the timer bug
+	 */
 	temp_byte = readb(ctrl->hpc_reg + SLOT_POWER);
 	writeb(0x00, ctrl->hpc_reg + SLOT_POWER);
 	writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER);
@@ -1443,12 +1455,12 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
 
 	/* Wait for SOBS to be unset */
 	wait_for_ctrl_irq (ctrl);
-	
+
 	adapter_speed = get_adapter_speed(ctrl, hp_slot);
 	if (ctrl->speed != adapter_speed)
 		if (set_controller_speed(ctrl, adapter_speed, hp_slot))
 			rc = WRONG_BUS_FREQUENCY;
-	
+
 	/* turn off board without attaching to the bus */
 	disable_slot_power (ctrl, hp_slot);
 
@@ -1461,7 +1473,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
 
 	if (rc)
 		return rc;
-	
+
 	p_slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
 	/* turn on board and blink green LED */
@@ -1521,7 +1533,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
 	}
 
 	/* All F's is an empty slot or an invalid board */
-	if (temp_register != 0xFFFFFFFF) {	  /* Check for a board in the slot */
+	if (temp_register != 0xFFFFFFFF) {
 		res_lists.io_head = ctrl->io_head;
 		res_lists.mem_head = ctrl->mem_head;
 		res_lists.p_mem_head = ctrl->p_mem_head;
@@ -1570,9 +1582,8 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl)
 		index = 0;
 		do {
 			new_slot = cpqhp_slot_find(ctrl->bus, func->device, index++);
-			if (new_slot && !new_slot->pci_dev) {
+			if (new_slot && !new_slot->pci_dev)
 				cpqhp_configure_device(ctrl, new_slot);
-			}
 		} while (new_slot);
 
 		mutex_lock(&ctrl->crit_sect);
@@ -1859,12 +1870,12 @@ static void interrupt_event_handler(struct controller *ctrl)
 						info(msg_button_on, p_slot->number);
 					}
 					mutex_lock(&ctrl->crit_sect);
-					
+
 					dbg("blink green LED and turn off amber\n");
-					
+
 					amber_LED_off (ctrl, hp_slot);
 					green_LED_blink (ctrl, hp_slot);
-					
+
 					set_SOGO(ctrl);
 
 					/* Wait for SOBS to be unset */
@@ -1958,7 +1969,7 @@ void cpqhp_pushbutton_thread(unsigned long slot)
 			if (cpqhp_process_SI(ctrl, func) != 0) {
 				amber_LED_on(ctrl, hp_slot);
 				green_LED_off(ctrl, hp_slot);
-				
+
 				set_SOGO(ctrl);
 
 				/* Wait for SOBS to be unset */
@@ -2079,7 +2090,7 @@ int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func)
 	struct pci_bus *pci_bus = ctrl->pci_bus;
 	int physical_slot=0;
 
-	device = func->device; 
+	device = func->device;
 	func = cpqhp_slot_find(ctrl->bus, device, index++);
 	p_slot = cpqhp_find_slot(ctrl, device);
 	if (p_slot) {
@@ -2113,9 +2124,8 @@ int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func)
 
 				/* If the VGA Enable bit is set, remove isn't
 				 * supported */
-				if (BCR & PCI_BRIDGE_CTL_VGA) {
+				if (BCR & PCI_BRIDGE_CTL_VGA)
 					rc = REMOVE_NOT_SUPPORTED;
-				}
 			}
 		}
 
@@ -2183,67 +2193,67 @@ int cpqhp_hardware_test(struct controller *ctrl, int test_num)
 	num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0f;
 
 	switch (test_num) {
-		case 1:
-			/* Do stuff here! */
-
-			/* Do that funky LED thing */
-			/* so we can restore them later */
-			save_LED = readl(ctrl->hpc_reg + LED_CONTROL);
-			work_LED = 0x01010101;
-			switch_leds(ctrl, num_of_slots, &work_LED, 0);
-			switch_leds(ctrl, num_of_slots, &work_LED, 1);
-			switch_leds(ctrl, num_of_slots, &work_LED, 0);
-			switch_leds(ctrl, num_of_slots, &work_LED, 1);
-
-			work_LED = 0x01010000;
-			writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
-			switch_leds(ctrl, num_of_slots, &work_LED, 0);
-			switch_leds(ctrl, num_of_slots, &work_LED, 1);
-			work_LED = 0x00000101;
-			writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
-			switch_leds(ctrl, num_of_slots, &work_LED, 0);
-			switch_leds(ctrl, num_of_slots, &work_LED, 1);
+	case 1:
+		/* Do stuff here! */
+
+		/* Do that funky LED thing */
+		/* so we can restore them later */
+		save_LED = readl(ctrl->hpc_reg + LED_CONTROL);
+		work_LED = 0x01010101;
+		switch_leds(ctrl, num_of_slots, &work_LED, 0);
+		switch_leds(ctrl, num_of_slots, &work_LED, 1);
+		switch_leds(ctrl, num_of_slots, &work_LED, 0);
+		switch_leds(ctrl, num_of_slots, &work_LED, 1);
+
+		work_LED = 0x01010000;
+		writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+		switch_leds(ctrl, num_of_slots, &work_LED, 0);
+		switch_leds(ctrl, num_of_slots, &work_LED, 1);
+		work_LED = 0x00000101;
+		writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+		switch_leds(ctrl, num_of_slots, &work_LED, 0);
+		switch_leds(ctrl, num_of_slots, &work_LED, 1);
+
+		work_LED = 0x01010000;
+		writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+		for (loop = 0; loop < num_of_slots; loop++) {
+			set_SOGO(ctrl);
 
-			work_LED = 0x01010000;
-			writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
-			for (loop = 0; loop < num_of_slots; loop++) {
-				set_SOGO(ctrl);
+			/* Wait for SOGO interrupt */
+			wait_for_ctrl_irq (ctrl);
 
-				/* Wait for SOGO interrupt */
-				wait_for_ctrl_irq (ctrl);
+			/* Get ready for next iteration */
+			long_delay((3*HZ)/10);
+			work_LED = work_LED >> 16;
+			writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
 
-				/* Get ready for next iteration */
-				long_delay((3*HZ)/10);
-				work_LED = work_LED >> 16;
-				writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
-				
-				set_SOGO(ctrl);
+			set_SOGO(ctrl);
 
-				/* Wait for SOGO interrupt */
-				wait_for_ctrl_irq (ctrl);
+			/* Wait for SOGO interrupt */
+			wait_for_ctrl_irq (ctrl);
 
-				/* Get ready for next iteration */
-				long_delay((3*HZ)/10);
-				work_LED = work_LED << 16;
-				writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
-				work_LED = work_LED << 1;
-				writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
-			}
+			/* Get ready for next iteration */
+			long_delay((3*HZ)/10);
+			work_LED = work_LED << 16;
+			writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+			work_LED = work_LED << 1;
+			writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+		}
 
-			/* put it back the way it was */
-			writel(save_LED, ctrl->hpc_reg + LED_CONTROL);
+		/* put it back the way it was */
+		writel(save_LED, ctrl->hpc_reg + LED_CONTROL);
 
-			set_SOGO(ctrl);
+		set_SOGO(ctrl);
 
-			/* Wait for SOBS to be unset */
-			wait_for_ctrl_irq (ctrl);
-			break;
-		case 2:
-			/* Do other stuff here! */
-			break;
-		case 3:
-			/* and more... */
-			break;
+		/* Wait for SOBS to be unset */
+		wait_for_ctrl_irq (ctrl);
+		break;
+	case 2:
+		/* Do other stuff here! */
+		break;
+	case 3:
+		/* and more... */
+		break;
 	}
 	return 0;
 }
@@ -2312,9 +2322,9 @@ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func
 		while ((function < max_functions) && (!stop_it)) {
 			pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID);
 
-			if (ID == 0xFFFFFFFF) {	  /* There's nothing there. */
+			if (ID == 0xFFFFFFFF) {
 				function++;
-			} else {  /* There's something there */
+			} else {
 				/* Setup slot structure. */
 				new_slot = cpqhp_slot_create(func->bus);
 
@@ -2339,8 +2349,8 @@ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func
 
 
 /*
-  Configuration logic that involves the hotplug data structures and 
-  their bookkeeping
+ * Configuration logic that involves the hotplug data structures and
+ * their bookkeeping
  */
 
 
@@ -2393,7 +2403,7 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
 	if (rc)
 		return rc;
 
-	if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
+	if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
 		/* set Primary bus */
 		dbg("set Primary bus = %d\n", func->bus);
 		rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus);
@@ -2484,7 +2494,8 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
 		temp_resources.irqs = &irqs;
 
 		/* Make copies of the nodes we are going to pass down so that
-		 * if there is a problem,we can just use these to free resources */
+		 * if there is a problem,we can just use these to free resources
+		 */
 		hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL);
 		hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL);
 		hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL);
@@ -2556,7 +2567,8 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
 		temp_word = (p_mem_node->base + p_mem_node->length - 1) >> 16;
 		rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
 
-		/* Adjust this to compensate for extra adjustment in first loop */
+		/* Adjust this to compensate for extra adjustment in first loop
+		 */
 		irqs.barber_pole--;
 
 		rc = 0;
@@ -2917,27 +2929,26 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
 		}		/* End of base register loop */
 		if (cpqhp_legacy_mode) {
 			/* Figure out which interrupt pin this function uses */
-			rc = pci_bus_read_config_byte (pci_bus, devfn, 
+			rc = pci_bus_read_config_byte (pci_bus, devfn,
 				PCI_INTERRUPT_PIN, &temp_byte);
 
 			/* If this function needs an interrupt and we are behind
 			 * a bridge and the pin is tied to something that's
 			 * alread mapped, set this one the same */
-			if (temp_byte && resources->irqs && 
-			    (resources->irqs->valid_INT & 
+			if (temp_byte && resources->irqs &&
+			    (resources->irqs->valid_INT &
 			     (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) {
 				/* We have to share with something already set up */
-				IRQ = resources->irqs->interrupt[(temp_byte + 
+				IRQ = resources->irqs->interrupt[(temp_byte +
 					resources->irqs->barber_pole - 1) & 0x03];
 			} else {
 				/* Program IRQ based on card type */
 				rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
 
-				if (class_code == PCI_BASE_CLASS_STORAGE) {
+				if (class_code == PCI_BASE_CLASS_STORAGE)
 					IRQ = cpqhp_disk_irq;
-				} else {
+				else
 					IRQ = cpqhp_nic_irq;
-				}
 			}
 
 			/* IRQ Line */
diff --git a/drivers/pci/hotplug/cpqphp_nvram.c b/drivers/pci/hotplug/cpqphp_nvram.c
index cb17488..76ba8a1 100644
--- a/drivers/pci/hotplug/cpqphp_nvram.c
+++ b/drivers/pci/hotplug/cpqphp_nvram.c
@@ -94,12 +94,13 @@ static u8 evbuffer[1024];
 
 static void __iomem *compaq_int15_entry_point;
 
-static spinlock_t int15_lock;		/* lock for ordering int15_bios_call() */
+/* lock for ordering int15_bios_call() */
+static spinlock_t int15_lock;
 
 
 /* This is a series of function that deals with
-   setting & getting the hotplug resource table in some environment variable.
-*/
+ * setting & getting the hotplug resource table in some environment variable.
+ */
 
 /*
  * We really shouldn't be doing this unless there is a _very_ good reason to!!!
@@ -113,7 +114,7 @@ static u32 add_byte( u32 **p_buffer, u8 value, u32 *used, u32 *avail)
 
 	if ((*used + 1) > *avail)
 		return(1);
-	
+
 	*((u8*)*p_buffer) = value;
 	tByte = (u8**)p_buffer;
 	(*tByte)++;
@@ -170,10 +171,10 @@ static u32 access_EV (u16 operation, u8 *ev_name, u8 *buffer, u32 *buf_size)
 	unsigned long flags;
 	int op = operation;
 	int ret_val;
-	
+
 	if (!compaq_int15_entry_point)
 		return -ENODEV;
-	
+
 	spin_lock_irqsave(&int15_lock, flags);
 	__asm__ (
 		"xorl   %%ebx,%%ebx\n" \
@@ -187,7 +188,7 @@ static u32 access_EV (u16 operation, u8 *ev_name, u8 *buffer, u32 *buf_size)
 		"D" (buffer), "m" (compaq_int15_entry_point)
 		: "%ebx", "%edx");
 	spin_unlock_irqrestore(&int15_lock, flags);
-	
+
 	return((ret_val & 0xFF00) >> 8);
 }
 
@@ -210,14 +211,16 @@ static int load_HRT (void __iomem *rom_start)
 
 	available = 1024;
 
-	// Now load the EV
+	/* Now load the EV */
 	temp_dword = available;
 
 	rc = access_EV(READ_EV, "CQTHPS", evbuffer, &temp_dword);
 
 	evbuffer_length = temp_dword;
 
-	// We're maintaining the resource lists so write FF to invalidate old info
+	/* We're maintaining the resource lists so write FF to invalidate old
+	 * info
+	 */
 	temp_dword = 1;
 
 	rc = access_EV(WRITE_EV, "CQTHPS", &temp_byte, &temp_dword);
@@ -263,13 +266,13 @@ static u32 store_HRT (void __iomem *rom_start)
 	p_EV_header = (struct ev_hrt_header *) pFill;
 
 	ctrl = cpqhp_ctrl_list;
-	
-	// The revision of this structure
+
+	/* The revision of this structure */
 	rc = add_byte( &pFill, 1 + ctrl->push_flag, &usedbytes, &available);
 	if (rc)
 		return(rc);
 
-	// The number of controllers
+	/* The number of controllers */
 	rc = add_byte( &pFill, 1, &usedbytes, &available);
 	if (rc)
 		return(rc);
@@ -279,27 +282,27 @@ static u32 store_HRT (void __iomem *rom_start)
 
 		numCtrl++;
 
-		// The bus number
+		/* The bus number */
 		rc = add_byte( &pFill, ctrl->bus, &usedbytes, &available);
 		if (rc)
 			return(rc);
 
-		// The device Number
+		/* The device Number */
 		rc = add_byte( &pFill, PCI_SLOT(ctrl->pci_dev->devfn), &usedbytes, &available);
 		if (rc)
 			return(rc);
 
-		// The function Number
+		/* The function Number */
 		rc = add_byte( &pFill, PCI_FUNC(ctrl->pci_dev->devfn), &usedbytes, &available);
 		if (rc)
 			return(rc);
 
-		// Skip the number of available entries
+		/* Skip the number of available entries */
 		rc = add_dword( &pFill, 0, &usedbytes, &available);
 		if (rc)
 			return(rc);
 
-		// Figure out memory Available
+		/* Figure out memory Available */
 
 		resNode = ctrl->mem_head;
 
@@ -308,12 +311,12 @@ static u32 store_HRT (void __iomem *rom_start)
 		while (resNode) {
 			loop ++;
 
-			// base
+			/* base */
 			rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
 			if (rc)
 				return(rc);
 
-			// length
+			/* length */
 			rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
 			if (rc)
 				return(rc);
@@ -321,10 +324,10 @@ static u32 store_HRT (void __iomem *rom_start)
 			resNode = resNode->next;
 		}
 
-		// Fill in the number of entries
+		/* Fill in the number of entries */
 		p_ev_ctrl->mem_avail = loop;
 
-		// Figure out prefetchable memory Available
+		/* Figure out prefetchable memory Available */
 
 		resNode = ctrl->p_mem_head;
 
@@ -333,12 +336,12 @@ static u32 store_HRT (void __iomem *rom_start)
 		while (resNode) {
 			loop ++;
 
-			// base
+			/* base */
 			rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
 			if (rc)
 				return(rc);
 
-			// length
+			/* length */
 			rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
 			if (rc)
 				return(rc);
@@ -346,10 +349,10 @@ static u32 store_HRT (void __iomem *rom_start)
 			resNode = resNode->next;
 		}
 
-		// Fill in the number of entries
+		/* Fill in the number of entries */
 		p_ev_ctrl->p_mem_avail = loop;
 
-		// Figure out IO Available
+		/* Figure out IO Available */
 
 		resNode = ctrl->io_head;
 
@@ -358,12 +361,12 @@ static u32 store_HRT (void __iomem *rom_start)
 		while (resNode) {
 			loop ++;
 
-			// base
+			/* base */
 			rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
 			if (rc)
 				return(rc);
 
-			// length
+			/* length */
 			rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
 			if (rc)
 				return(rc);
@@ -371,10 +374,10 @@ static u32 store_HRT (void __iomem *rom_start)
 			resNode = resNode->next;
 		}
 
-		// Fill in the number of entries
+		/* Fill in the number of entries */
 		p_ev_ctrl->io_avail = loop;
 
-		// Figure out bus Available
+		/* Figure out bus Available */
 
 		resNode = ctrl->bus_head;
 
@@ -383,12 +386,12 @@ static u32 store_HRT (void __iomem *rom_start)
 		while (resNode) {
 			loop ++;
 
-			// base
+			/* base */
 			rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
 			if (rc)
 				return(rc);
 
-			// length
+			/* length */
 			rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
 			if (rc)
 				return(rc);
@@ -396,15 +399,15 @@ static u32 store_HRT (void __iomem *rom_start)
 			resNode = resNode->next;
 		}
 
-		// Fill in the number of entries
+		/* Fill in the number of entries */
 		p_ev_ctrl->bus_avail = loop;
 
 		ctrl = ctrl->next;
 	}
-	
+
 	p_EV_header->num_of_ctrl = numCtrl;
 
-	// Now store the EV
+	/* Now store the EV */
 
 	temp_dword = usedbytes;
 
@@ -449,20 +452,21 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl)
 	struct ev_hrt_header *p_EV_header;
 
 	if (!evbuffer_init) {
-		// Read the resource list information in from NVRAM
+		/* Read the resource list information in from NVRAM */
 		if (load_HRT(rom_start))
 			memset (evbuffer, 0, 1024);
 
 		evbuffer_init = 1;
 	}
 
-	// If we saved information in NVRAM, use it now
+	/* If we saved information in NVRAM, use it now */
 	p_EV_header = (struct ev_hrt_header *) evbuffer;
 
-	// The following code is for systems where version 1.0 of this
-	// driver has been loaded, but doesn't support the hardware.
-	// In that case, the driver would incorrectly store something
-	// in NVRAM.
+	/* The following code is for systems where version 1.0 of this
+	 * driver has been loaded, but doesn't support the hardware.
+	 * In that case, the driver would incorrectly store something
+	 * in NVRAM.
+	 */
 	if ((p_EV_header->Version == 2) ||
 	    ((p_EV_header->Version == 1) && !ctrl->push_flag)) {
 		p_byte = &(p_EV_header->next);
@@ -479,7 +483,7 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl)
 		function = p_ev_ctrl->function;
 
 		while ((bus != ctrl->bus) ||
-		       (device != PCI_SLOT(ctrl->pci_dev->devfn)) || 
+		       (device != PCI_SLOT(ctrl->pci_dev->devfn)) ||
 		       (function != PCI_FUNC(ctrl->pci_dev->devfn))) {
 			nummem = p_ev_ctrl->mem_avail;
 			numpmem = p_ev_ctrl->p_mem_avail;
@@ -491,7 +495,7 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl)
 			if (p_byte > ((u8*)p_EV_header + evbuffer_length))
 				return 2;
 
-			// Skip forward to the next entry
+			/* Skip forward to the next entry */
 			p_byte += (nummem + numpmem + numio + numbus) * 8;
 
 			if (p_byte > ((u8*)p_EV_header + evbuffer_length))
@@ -629,8 +633,9 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl)
 			ctrl->bus_head = bus_node;
 		}
 
-		// If all of the following fail, we don't have any resources for
-		// hot plug add
+		/* If all of the following fail, we don't have any resources for
+		 * hot plug add
+		 */
 		rc = 1;
 		rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
 		rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
@@ -640,14 +645,14 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl)
 		if (rc)
 			return(rc);
 	} else {
-		if ((evbuffer[0] != 0) && (!ctrl->push_flag)) 
+		if ((evbuffer[0] != 0) && (!ctrl->push_flag))
 			return 1;
 	}
 
 	return 0;
 }
 
-	
+
 int compaq_nvram_store (void __iomem *rom_start)
 {
 	int rc = 1;
diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
index 6c0ed0f..6173b9a 100644
--- a/drivers/pci/hotplug/cpqphp_pci.c
+++ b/drivers/pci/hotplug/cpqphp_pci.c
@@ -37,7 +37,6 @@
 #include "../pci.h"
 #include "cpqphp.h"
 #include "cpqphp_nvram.h"
-#include <asm/pci_x86.h>
 
 
 u8 cpqhp_nic_irq;
@@ -82,14 +81,14 @@ static void __iomem *detect_HRT_floating_pointer(void __iomem *begin, void __iom
 }
 
 
-int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func)  
+int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func)
 {
 	unsigned char bus;
 	struct pci_bus *child;
 	int num;
 
 	if (func->pci_dev == NULL)
-		func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function));
+		func->pci_dev = pci_get_bus_and_slot(func->bus,PCI_DEVFN(func->device, func->function));
 
 	/* No pci device, we need to create it then */
 	if (func->pci_dev == NULL) {
@@ -99,7 +98,7 @@ int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func)
 		if (num)
 			pci_bus_add_devices(ctrl->pci_dev->bus);
 
-		func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function));
+		func->pci_dev = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, func->function));
 		if (func->pci_dev == NULL) {
 			dbg("ERROR: pci_dev still null\n");
 			return 0;
@@ -112,20 +111,24 @@ int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func)
 		pci_do_scan_bus(child);
 	}
 
+	pci_dev_put(func->pci_dev);
+
 	return 0;
 }
 
 
-int cpqhp_unconfigure_device(struct pci_func* func) 
+int cpqhp_unconfigure_device(struct pci_func* func)
 {
 	int j;
-	
+
 	dbg("%s: bus/dev/func = %x/%x/%x\n", __func__, func->bus, func->device, func->function);
 
 	for (j=0; j<8 ; j++) {
-		struct pci_dev* temp = pci_find_slot(func->bus, PCI_DEVFN(func->device, j));
-		if (temp)
+		struct pci_dev* temp = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, j));
+		if (temp) {
+			pci_dev_put(temp);
 			pci_remove_bus_device(temp);
+		}
 	}
 	return 0;
 }
@@ -178,32 +181,22 @@ int cpqhp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num)
 		if (!rc)
 			return !rc;
 
-		// set the Edge Level Control Register (ELCR)
+		/* set the Edge Level Control Register (ELCR) */
 		temp_word = inb(0x4d0);
 		temp_word |= inb(0x4d1) << 8;
 
 		temp_word |= 0x01 << irq_num;
 
-		// This should only be for x86 as it sets the Edge Level Control Register
-		outb((u8) (temp_word & 0xFF), 0x4d0);
-		outb((u8) ((temp_word & 0xFF00) >> 8), 0x4d1);
-		rc = 0;
-	}
+		/* This should only be for x86 as it sets the Edge Level
+		 * Control Register
+		 */
+		outb((u8) (temp_word & 0xFF), 0x4d0); outb((u8) ((temp_word &
+		0xFF00) >> 8), 0x4d1); rc = 0; }
 
 	return rc;
 }
 
 
-/*
- * WTF??? This function isn't in the code, yet a function calls it, but the 
- * compiler optimizes it away?  strange.  Here as a placeholder to keep the 
- * compiler happy.
- */
-static int PCI_ScanBusNonBridge (u8 bus, u8 device)
-{
-	return 0;
-}
-
 static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev_num)
 {
 	u16 tdevice;
@@ -213,11 +206,11 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev
 	ctrl->pci_bus->number = bus_num;
 
 	for (tdevice = 0; tdevice < 0xFF; tdevice++) {
-		//Scan for access first
+		/* Scan for access first */
 		if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
 			continue;
 		dbg("Looking for nonbridge bus_num %d dev_num %d\n", bus_num, tdevice);
-		//Yep we got one. Not a bridge ?
+		/* Yep we got one. Not a bridge ? */
 		if ((work >> 8) != PCI_TO_PCI_BRIDGE_CLASS) {
 			*dev_num = tdevice;
 			dbg("found it !\n");
@@ -225,16 +218,16 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev
 		}
 	}
 	for (tdevice = 0; tdevice < 0xFF; tdevice++) {
-		//Scan for access first
+		/* Scan for access first */
 		if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
 			continue;
 		dbg("Looking for bridge bus_num %d dev_num %d\n", bus_num, tdevice);
-		//Yep we got one. bridge ?
+		/* Yep we got one. bridge ? */
 		if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
 			pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(tdevice, 0), PCI_SECONDARY_BUS, &tbus);
+			/* XXX: no recursion, wtf? */
 			dbg("Recurse on bus_num %d tdevice %d\n", tbus, tdevice);
-			if (PCI_ScanBusNonBridge(tbus, tdevice) == 0)
-				return 0;
+			return 0;
 		}
 	}
 
@@ -244,39 +237,23 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev
 
 static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot, u8 nobridge)
 {
-	struct irq_routing_table *PCIIRQRoutingInfoLength;
-	long len;
-	long loop;
+	int loop, len;
 	u32 work;
-
 	u8 tbus, tdevice, tslot;
 
-	PCIIRQRoutingInfoLength = pcibios_get_irq_routing_table();
-	if (!PCIIRQRoutingInfoLength)
-		return -1;
-
-	len = (PCIIRQRoutingInfoLength->size -
-	       sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
-	// Make sure I got at least one entry
-	if (len == 0) {
-		kfree(PCIIRQRoutingInfoLength );
-		return -1;
-	}
-
+	len = cpqhp_routing_table_length();
 	for (loop = 0; loop < len; ++loop) {
-		tbus = PCIIRQRoutingInfoLength->slots[loop].bus;
-		tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn;
-		tslot = PCIIRQRoutingInfoLength->slots[loop].slot;
+		tbus = cpqhp_routing_table->slots[loop].bus;
+		tdevice = cpqhp_routing_table->slots[loop].devfn;
+		tslot = cpqhp_routing_table->slots[loop].slot;
 
 		if (tslot == slot) {
 			*bus_num = tbus;
 			*dev_num = tdevice;
 			ctrl->pci_bus->number = tbus;
 			pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_VENDOR_ID, &work);
-			if (!nobridge || (work == 0xffffffff)) {
-				kfree(PCIIRQRoutingInfoLength );
+			if (!nobridge || (work == 0xffffffff))
 				return 0;
-			}
 
 			dbg("bus_num %d devfn %d\n", *bus_num, *dev_num);
 			pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_CLASS_REVISION, &work);
@@ -287,28 +264,26 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num
 				dbg("Scan bus for Non Bridge: bus %d\n", tbus);
 				if (PCI_ScanBusForNonBridge(ctrl, tbus, dev_num) == 0) {
 					*bus_num = tbus;
-					kfree(PCIIRQRoutingInfoLength );
 					return 0;
 				}
-			} else {
-				kfree(PCIIRQRoutingInfoLength );
+			} else
 				return 0;
-			}
-
 		}
 	}
-	kfree(PCIIRQRoutingInfoLength );
 	return -1;
 }
 
 
 int cpqhp_get_bus_dev (struct controller *ctrl, u8 * bus_num, u8 * dev_num, u8 slot)
 {
-	return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0);	//plain (bridges allowed)
+	/* plain (bridges allowed) */
+	return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0);
 }
 
 
-/* More PCI configuration routines; this time centered around hotplug controller */
+/* More PCI configuration routines; this time centered around hotplug
+ * controller
+ */
 
 
 /*
@@ -339,12 +314,12 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 	int stop_it;
 	int index;
 
-	//              Decide which slots are supported
+	/* Decide which slots are supported */
 
 	if (is_hot_plug) {
-		//*********************************
-		// is_hot_plug is the slot mask
-		//*********************************
+		/*
+		 * is_hot_plug is the slot mask
+		 */
 		FirstSupported = is_hot_plug >> 4;
 		LastSupported = FirstSupported + (is_hot_plug & 0x0F) - 1;
 	} else {
@@ -352,123 +327,127 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 		LastSupported = 0x1F;
 	}
 
-	//     Save PCI configuration space for all devices in supported slots
+	/* Save PCI configuration space for all devices in supported slots */
 	ctrl->pci_bus->number = busnumber;
 	for (device = FirstSupported; device <= LastSupported; device++) {
 		ID = 0xFFFFFFFF;
-		rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID);
+		rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID);
+
+		if (ID == 0xFFFFFFFF) {
+			if (is_hot_plug) {
+				/* Setup slot structure with entry for empty
+				 * slot
+				 */
+				new_slot = cpqhp_slot_create(busnumber);
+				if (new_slot == NULL)
+					return 1;
 
-		if (ID != 0xFFFFFFFF) {	  //  device in slot
-			rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code);
-			if (rc)
-				return rc;
+				new_slot->bus = (u8) busnumber;
+				new_slot->device = (u8) device;
+				new_slot->function = 0;
+				new_slot->is_a_board = 0;
+				new_slot->presence_save = 0;
+				new_slot->switch_save = 0;
+			}
+			continue;
+		}
 
-			rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type);
-			if (rc)
-				return rc;
+		rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code);
+		if (rc)
+			return rc;
 
-			// If multi-function device, set max_functions to 8
-			if (header_type & 0x80)
-				max_functions = 8;
-			else
-				max_functions = 1;
+		rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type);
+		if (rc)
+			return rc;
 
-			function = 0;
+		/* If multi-function device, set max_functions to 8 */
+		if (header_type & 0x80)
+			max_functions = 8;
+		else
+			max_functions = 1;
 
-			do {
-				DevError = 0;
+		function = 0;
 
-				if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {   // P-P Bridge
-					//  Recurse the subordinate bus
-					//  get the subordinate bus number
-					rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus);
-					if (rc) {
+		do {
+			DevError = 0;
+			if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+				/* Recurse the subordinate bus
+				 * get the subordinate bus number
+				 */
+				rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus);
+				if (rc) {
+					return rc;
+				} else {
+					sub_bus = (int) secondary_bus;
+
+					/* Save secondary bus cfg spc
+					 * with this recursive call.
+					 */
+					rc = cpqhp_save_config(ctrl, sub_bus, 0);
+					if (rc)
 						return rc;
-					} else {
-						sub_bus = (int) secondary_bus;
-
-						// Save secondary bus cfg spc
-						// with this recursive call.
-						rc = cpqhp_save_config(ctrl, sub_bus, 0);
-						if (rc)
-							return rc;
-						ctrl->pci_bus->number = busnumber;
-					}
+					ctrl->pci_bus->number = busnumber;
 				}
+			}
 
-				index = 0;
+			index = 0;
+			new_slot = cpqhp_slot_find(busnumber, device, index++);
+			while (new_slot &&
+			       (new_slot->function != (u8) function))
 				new_slot = cpqhp_slot_find(busnumber, device, index++);
-				while (new_slot && 
-				       (new_slot->function != (u8) function))
-					new_slot = cpqhp_slot_find(busnumber, device, index++);
 
-				if (!new_slot) {
-					// Setup slot structure.
-					new_slot = cpqhp_slot_create(busnumber);
-
-					if (new_slot == NULL)
-						return(1);
-				}
-
-				new_slot->bus = (u8) busnumber;
-				new_slot->device = (u8) device;
-				new_slot->function = (u8) function;
-				new_slot->is_a_board = 1;
-				new_slot->switch_save = 0x10;
-				// In case of unsupported board
-				new_slot->status = DevError;
-				new_slot->pci_dev = pci_find_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function);
-
-				for (cloop = 0; cloop < 0x20; cloop++) {
-					rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
-					if (rc)
-						return rc;
-				}
+			if (!new_slot) {
+				/* Setup slot structure. */
+				new_slot = cpqhp_slot_create(busnumber);
+				if (new_slot == NULL)
+					return 1;
+			}
 
-				function++;
+			new_slot->bus = (u8) busnumber;
+			new_slot->device = (u8) device;
+			new_slot->function = (u8) function;
+			new_slot->is_a_board = 1;
+			new_slot->switch_save = 0x10;
+			/* In case of unsupported board */
+			new_slot->status = DevError;
+			new_slot->pci_dev = pci_get_bus_and_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function);
 
-				stop_it = 0;
+			for (cloop = 0; cloop < 0x20; cloop++) {
+				rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
+				if (rc)
+					return rc;
+			}
 
-				//  this loop skips to the next present function
-				//  reading in Class Code and Header type.
+			pci_dev_put(new_slot->pci_dev);
 
-				while ((function < max_functions)&&(!stop_it)) {
-					rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID);
-					if (ID == 0xFFFFFFFF) {	 // nothing there.
-						function++;
-					} else {  // Something there
-						rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code);
-						if (rc)
-							return rc;
+			function++;
 
-						rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type);
-						if (rc)
-							return rc;
+			stop_it = 0;
 
-						stop_it++;
-					}
+			/* this loop skips to the next present function
+			 * reading in Class Code and Header type.
+			 */
+			while ((function < max_functions) && (!stop_it)) {
+				rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID);
+				if (ID == 0xFFFFFFFF) {
+					function++;
+					continue;
 				}
+				rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code);
+				if (rc)
+					return rc;
 
-			} while (function < max_functions);
-		}		// End of IF (device in slot?)
-		else if (is_hot_plug) {
-			// Setup slot structure with entry for empty slot
-			new_slot = cpqhp_slot_create(busnumber);
+				rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type);
+				if (rc)
+					return rc;
 
-			if (new_slot == NULL) {
-				return(1);
+				stop_it++;
 			}
 
-			new_slot->bus = (u8) busnumber;
-			new_slot->device = (u8) device;
-			new_slot->function = 0;
-			new_slot->is_a_board = 0;
-			new_slot->presence_save = 0;
-			new_slot->switch_save = 0;
-		}
-	}			// End of FOR loop
+		} while (function < max_functions);
+	}			/* End of FOR loop */
 
-	return(0);
+	return 0;
 }
 
 
@@ -489,7 +468,7 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot)
 	u8 secondary_bus;
 	int sub_bus;
 	int max_functions;
-	int function;
+	int function = 0;
 	int cloop = 0;
 	int stop_it;
 
@@ -498,63 +477,58 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot)
 	ctrl->pci_bus->number = new_slot->bus;
 	pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_VENDOR_ID, &ID);
 
-	if (ID != 0xFFFFFFFF) {	  //  device in slot
-		pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code);
-		pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type);
-
-		if (header_type & 0x80)	// Multi-function device
-			max_functions = 8;
-		else
-			max_functions = 1;
-
-		function = 0;
-
-		do {
-			if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {	  // PCI-PCI Bridge
-				//  Recurse the subordinate bus
-				pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus);
+	if (ID == 0xFFFFFFFF)
+		return 2;
 
-				sub_bus = (int) secondary_bus;
+	pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code);
+	pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type);
 
-				// Save the config headers for the secondary bus.
-				rc = cpqhp_save_config(ctrl, sub_bus, 0);
-				if (rc)
-					return(rc);
-				ctrl->pci_bus->number = new_slot->bus;
+	if (header_type & 0x80)	/* Multi-function device */
+		max_functions = 8;
+	else
+		max_functions = 1;
 
-			}	// End of IF
+	while (function < max_functions) {
+		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+			/*  Recurse the subordinate bus */
+			pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus);
 
-			new_slot->status = 0;
+			sub_bus = (int) secondary_bus;
 
-			for (cloop = 0; cloop < 0x20; cloop++) {
-				pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
-			}
+			/* Save the config headers for the secondary
+			 * bus.
+			 */
+			rc = cpqhp_save_config(ctrl, sub_bus, 0);
+			if (rc)
+				return(rc);
+			ctrl->pci_bus->number = new_slot->bus;
 
-			function++;
+		}
 
-			stop_it = 0;
+		new_slot->status = 0;
 
-			//  this loop skips to the next present function
-			//  reading in the Class Code and the Header type.
+		for (cloop = 0; cloop < 0x20; cloop++)
+			pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
 
-			while ((function < max_functions) && (!stop_it)) {
-				pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID);
+		function++;
 
-				if (ID == 0xFFFFFFFF) {	 // nothing there.
-					function++;
-				} else {  // Something there
-					pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code);
+		stop_it = 0;
 
-					pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type);
+		/* this loop skips to the next present function
+		 * reading in the Class Code and the Header type.
+		 */
+		while ((function < max_functions) && (!stop_it)) {
+			pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID);
 
-					stop_it++;
-				}
+			if (ID == 0xFFFFFFFF)
+				function++;
+			else {
+				pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code);
+				pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type);
+				stop_it++;
 			}
+		}
 
-		} while (function < max_functions);
-	}			// End of IF (device in slot?)
-	else {
-		return 2;
 	}
 
 	return 0;
@@ -590,11 +564,10 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
 		pci_bus->number = func->bus;
 		devfn = PCI_DEVFN(func->device, func->function);
 
-		// Check for Bridge
+		/* Check for Bridge */
 		pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 
 		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
-			// PCI-PCI Bridge
 			pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
 
 			sub_bus = (int) secondary_bus;
@@ -610,23 +583,27 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
 			}
 			pci_bus->number = func->bus;
 
-			//FIXME: this loop is duplicated in the non-bridge case.  The two could be rolled together
-			// Figure out IO and memory base lengths
+			/* FIXME: this loop is duplicated in the non-bridge
+			 * case.  The two could be rolled together Figure out
+			 * IO and memory base lengths
+			 */
 			for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
 				temp_register = 0xFFFFFFFF;
 				pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
-
-				if (base) {  // If this register is implemented
+				/* If this register is implemented */
+				if (base) {
 					if (base & 0x01L) {
-						// IO base
-						// set base = amount of IO space requested
+						/* IO base
+						 * set base = amount of IO space
+						 * requested
+						 */
 						base = base & 0xFFFFFFFE;
 						base = (~base) + 1;
 
 						type = 1;
 					} else {
-						// memory base
+						/* memory base */
 						base = base & 0xFFFFFFF0;
 						base = (~base) + 1;
 
@@ -637,32 +614,36 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
 					type = 0;
 				}
 
-				// Save information in slot structure
+				/* Save information in slot structure */
 				func->base_length[(cloop - 0x10) >> 2] =
 				base;
 				func->base_type[(cloop - 0x10) >> 2] = type;
 
-			}	// End of base register loop
+			}	/* End of base register loop */
 
-
-		} else if ((header_type & 0x7F) == 0x00) {	  // PCI-PCI Bridge
-			// Figure out IO and memory base lengths
+		} else if ((header_type & 0x7F) == 0x00) {
+			/* Figure out IO and memory base lengths */
 			for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
 				temp_register = 0xFFFFFFFF;
 				pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
 
-				if (base) {  // If this register is implemented
+				/* If this register is implemented */
+				if (base) {
 					if (base & 0x01L) {
-						// IO base
-						// base = amount of IO space requested
+						/* IO base
+						 * base = amount of IO space
+						 * requested
+						 */
 						base = base & 0xFFFFFFFE;
 						base = (~base) + 1;
 
 						type = 1;
 					} else {
-						// memory base
-						// base = amount of memory space requested
+						/* memory base
+						 * base = amount of memory
+						 * space requested
+						 */
 						base = base & 0xFFFFFFF0;
 						base = (~base) + 1;
 
@@ -673,16 +654,16 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func)
 					type = 0;
 				}
 
-				// Save information in slot structure
+				/* Save information in slot structure */
 				func->base_length[(cloop - 0x10) >> 2] = base;
 				func->base_type[(cloop - 0x10) >> 2] = type;
 
-			}	// End of base register loop
+			}	/* End of base register loop */
 
-		} else {	  // Some other unknown header type
+		} else {	  /* Some other unknown header type */
 		}
 
-		// find the next device in this slot
+		/* find the next device in this slot */
 		func = cpqhp_slot_find(func->bus, func->device, index++);
 	}
 
@@ -728,18 +709,18 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 		pci_bus->number = func->bus;
 		devfn = PCI_DEVFN(func->device, func->function);
 
-		// Save the command register
+		/* Save the command register */
 		pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command);
 
-		// disable card
+		/* disable card */
 		command = 0x00;
 		pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command);
 
-		// Check for Bridge
+		/* Check for Bridge */
 		pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 
-		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {	  // PCI-PCI Bridge
-			// Clear Bridge Control Register
+		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+			/* Clear Bridge Control Register */
 			command = 0x00;
 			pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command);
 			pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
@@ -755,7 +736,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 			bus_node->next = func->bus_head;
 			func->bus_head = bus_node;
 
-			// Save IO base and Limit registers
+			/* Save IO base and Limit registers */
 			pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &b_base);
 			pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &b_length);
 
@@ -771,7 +752,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 				func->io_head = io_node;
 			}
 
-			// Save memory base and Limit registers
+			/* Save memory base and Limit registers */
 			pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base);
 			pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length);
 
@@ -787,7 +768,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 				func->mem_head = mem_node;
 			}
 
-			// Save prefetchable memory base and Limit registers
+			/* Save prefetchable memory base and Limit registers */
 			pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base);
 			pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length);
 
@@ -802,7 +783,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 				p_mem_node->next = func->p_mem_head;
 				func->p_mem_head = p_mem_node;
 			}
-			// Figure out IO and memory base lengths
+			/* Figure out IO and memory base lengths */
 			for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &save_base);
 
@@ -812,11 +793,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 
 				temp_register = base;
 
-				if (base) {  // If this register is implemented
+				/* If this register is implemented */
+				if (base) {
 					if (((base & 0x03L) == 0x01)
 					    && (save_command & 0x01)) {
-						// IO base
-						// set temp_register = amount of IO space requested
+						/* IO base
+						 * set temp_register = amount
+						 * of IO space requested
+						 */
 						temp_register = base & 0xFFFFFFFE;
 						temp_register = (~temp_register) + 1;
 
@@ -834,7 +818,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						if (((base & 0x0BL) == 0x08)
 						    && (save_command & 0x02)) {
-						// prefetchable memory base
+						/* prefetchable memory base */
 						temp_register = base & 0xFFFFFFF0;
 						temp_register = (~temp_register) + 1;
 
@@ -851,7 +835,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						if (((base & 0x0BL) == 0x00)
 						    && (save_command & 0x02)) {
-						// prefetchable memory base
+						/* prefetchable memory base */
 						temp_register = base & 0xFFFFFFF0;
 						temp_register = (~temp_register) + 1;
 
@@ -868,9 +852,10 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						return(1);
 				}
-			}	// End of base register loop
-		} else if ((header_type & 0x7F) == 0x00) {	  // Standard header
-			// Figure out IO and memory base lengths
+			}	/* End of base register loop */
+		/* Standard header */
+		} else if ((header_type & 0x7F) == 0x00) {
+			/* Figure out IO and memory base lengths */
 			for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
 				pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base);
 
@@ -880,11 +865,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 
 				temp_register = base;
 
-				if (base) {	  // If this register is implemented
+				/* If this register is implemented */
+				if (base) {
 					if (((base & 0x03L) == 0x01)
 					    && (save_command & 0x01)) {
-						// IO base
-						// set temp_register = amount of IO space requested
+						/* IO base
+						 * set temp_register = amount
+						 * of IO space requested
+						 */
 						temp_register = base & 0xFFFFFFFE;
 						temp_register = (~temp_register) + 1;
 
@@ -901,7 +889,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						if (((base & 0x0BL) == 0x08)
 						    && (save_command & 0x02)) {
-						// prefetchable memory base
+						/* prefetchable memory base */
 						temp_register = base & 0xFFFFFFF0;
 						temp_register = (~temp_register) + 1;
 
@@ -918,7 +906,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						if (((base & 0x0BL) == 0x00)
 						    && (save_command & 0x02)) {
-						// prefetchable memory base
+						/* prefetchable memory base */
 						temp_register = base & 0xFFFFFFF0;
 						temp_register = (~temp_register) + 1;
 
@@ -935,15 +923,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func)
 					} else
 						return(1);
 				}
-			}	// End of base register loop
-		} else {	  // Some other unknown header type
+			}	/* End of base register loop */
 		}
 
-		// find the next device in this slot
+		/* find the next device in this slot */
 		func = cpqhp_slot_find(func->bus, func->device, index++);
 	}
 
-	return(0);
+	return 0;
 }
 
 
@@ -975,16 +962,16 @@ int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func)
 		pci_bus->number = func->bus;
 		devfn = PCI_DEVFN(func->device, func->function);
 
-		// Start at the top of config space so that the control
-		// registers are programmed last
-		for (cloop = 0x3C; cloop > 0; cloop -= 4) {
+		/* Start at the top of config space so that the control
+		 * registers are programmed last
+		 */
+		for (cloop = 0x3C; cloop > 0; cloop -= 4)
 			pci_bus_write_config_dword (pci_bus, devfn, cloop, func->config_space[cloop >> 2]);
-		}
 
 		pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 
-		// If this is a bridge device, restore subordinate devices
-		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {	  // PCI-PCI Bridge
+		/* If this is a bridge device, restore subordinate devices */
+		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
 			pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
 
 			sub_bus = (int) secondary_bus;
@@ -1000,8 +987,9 @@ int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func)
 			}
 		} else {
 
-			// Check all the base Address Registers to make sure
-			// they are the same.  If not, the board is different.
+			/* Check all the base Address Registers to make sure
+			 * they are the same.  If not, the board is different.
+			 */
 
 			for (cloop = 16; cloop < 40; cloop += 4) {
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &temp);
@@ -1058,27 +1046,28 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
 
 		pci_bus_read_config_dword (pci_bus, devfn, PCI_VENDOR_ID, &temp_register);
 
-		// No adapter present
+		/* No adapter present */
 		if (temp_register == 0xFFFFFFFF)
 			return(NO_ADAPTER_PRESENT);
 
 		if (temp_register != func->config_space[0])
 			return(ADAPTER_NOT_SAME);
 
-		// Check for same revision number and class code
+		/* Check for same revision number and class code */
 		pci_bus_read_config_dword (pci_bus, devfn, PCI_CLASS_REVISION, &temp_register);
 
-		// Adapter not the same
+		/* Adapter not the same */
 		if (temp_register != func->config_space[0x08 >> 2])
 			return(ADAPTER_NOT_SAME);
 
-		// Check for Bridge
+		/* Check for Bridge */
 		pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 
-		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {	  // PCI-PCI Bridge
-			// In order to continue checking, we must program the
-			// bus registers in the bridge to respond to accesses
-			// for it's subordinate bus(es)
+		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+			/* In order to continue checking, we must program the
+			 * bus registers in the bridge to respond to accesses
+			 * for its subordinate bus(es)
+			 */
 
 			temp_register = func->config_space[0x18 >> 2];
 			pci_bus_write_config_dword (pci_bus, devfn, PCI_PRIMARY_BUS, temp_register);
@@ -1096,35 +1085,39 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
 			}
 
 		}
-		// Check to see if it is a standard config header
+		/* Check to see if it is a standard config header */
 		else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
-			// Check subsystem vendor and ID
+			/* Check subsystem vendor and ID */
 			pci_bus_read_config_dword (pci_bus, devfn, PCI_SUBSYSTEM_VENDOR_ID, &temp_register);
 
 			if (temp_register != func->config_space[0x2C >> 2]) {
-				// If it's a SMART-2 and the register isn't filled
-				// in, ignore the difference because
-				// they just have an old rev of the firmware
-
+				/* If it's a SMART-2 and the register isn't
+				 * filled in, ignore the difference because
+				 * they just have an old rev of the firmware
+				 */
 				if (!((func->config_space[0] == 0xAE100E11)
 				      && (temp_register == 0x00L)))
 					return(ADAPTER_NOT_SAME);
 			}
-			// Figure out IO and memory base lengths
+			/* Figure out IO and memory base lengths */
 			for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
 				temp_register = 0xFFFFFFFF;
 				pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
 				pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
-				if (base) {	  // If this register is implemented
+
+				/* If this register is implemented */
+				if (base) {
 					if (base & 0x01L) {
-						// IO base
-						// set base = amount of IO space requested
+						/* IO base
+						 * set base = amount of IO
+						 * space requested
+						 */
 						base = base & 0xFFFFFFFE;
 						base = (~base) + 1;
 
 						type = 1;
 					} else {
-						// memory base
+						/* memory base */
 						base = base & 0xFFFFFFF0;
 						base = (~base) + 1;
 
@@ -1135,23 +1128,24 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
 					type = 0;
 				}
 
-				// Check information in slot structure
+				/* Check information in slot structure */
 				if (func->base_length[(cloop - 0x10) >> 2] != base)
 					return(ADAPTER_NOT_SAME);
 
 				if (func->base_type[(cloop - 0x10) >> 2] != type)
 					return(ADAPTER_NOT_SAME);
 
-			}	// End of base register loop
+			}	/* End of base register loop */
 
-		}		// End of (type 0 config space) else
+		}		/* End of (type 0 config space) else */
 		else {
-			// this is not a type 0 or 1 config space header so
-			// we don't know how to do it
+			/* this is not a type 0 or 1 config space header so
+			 * we don't know how to do it
+			 */
 			return(DEVICE_TYPE_NOT_SUPPORTED);
 		}
 
-		// Get the next function
+		/* Get the next function */
 		func = cpqhp_slot_find(func->bus, func->device, index++);
 	}
 
@@ -1168,7 +1162,7 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func)
  * this function is for hot plug ADD!
  *
  * returns 0 if success
- */  
+ */
 int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_start)
 {
 	u8 temp;
@@ -1187,10 +1181,10 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 	rom_resource_table = detect_HRT_floating_pointer(rom_start, rom_start+0xffff);
 	dbg("rom_resource_table = %p\n", rom_resource_table);
 
-	if (rom_resource_table == NULL) {
+	if (rom_resource_table == NULL)
 		return -ENODEV;
-	}
-	// Sum all resources and setup resource maps
+
+	/* Sum all resources and setup resource maps */
 	unused_IRQ = readl(rom_resource_table + UNUSED_IRQ);
 	dbg("unused_IRQ = %x\n", unused_IRQ);
 
@@ -1222,13 +1216,11 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 
 	temp = 0;
 
-	if (!cpqhp_nic_irq) {
+	if (!cpqhp_nic_irq)
 		cpqhp_nic_irq = ctrl->cfgspc_irq;
-	}
 
-	if (!cpqhp_disk_irq) {
+	if (!cpqhp_disk_irq)
 		cpqhp_disk_irq = ctrl->cfgspc_irq;
-	}
 
 	dbg("cpqhp_disk_irq, cpqhp_nic_irq= %d, %d\n", cpqhp_disk_irq, cpqhp_nic_irq);
 
@@ -1262,13 +1254,13 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 		    dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length,
 		    primary_bus, secondary_bus, max_bus);
 
-		// If this entry isn't for our controller's bus, ignore it
+		/* If this entry isn't for our controller's bus, ignore it */
 		if (primary_bus != ctrl->bus) {
 			i--;
 			one_slot += sizeof (struct slot_rt);
 			continue;
 		}
-		// find out if this entry is for an occupied slot
+		/* find out if this entry is for an occupied slot */
 		ctrl->pci_bus->number = primary_bus;
 		pci_bus_read_config_dword (ctrl->pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword);
 		dbg("temp_D_word = %x\n", temp_dword);
@@ -1282,13 +1274,13 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 				func = cpqhp_slot_find(primary_bus, dev_func >> 3, index++);
 			}
 
-			// If we can't find a match, skip this table entry
+			/* If we can't find a match, skip this table entry */
 			if (!func) {
 				i--;
 				one_slot += sizeof (struct slot_rt);
 				continue;
 			}
-			// this may not work and shouldn't be used
+			/* this may not work and shouldn't be used */
 			if (secondary_bus != primary_bus)
 				bridged_slot = 1;
 			else
@@ -1301,7 +1293,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 		}
 
 
-		// If we've got a valid IO base, use it
+		/* If we've got a valid IO base, use it */
 
 		temp_dword = io_base + io_length;
 
@@ -1325,7 +1317,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 			}
 		}
 
-		// If we've got a valid memory base, use it
+		/* If we've got a valid memory base, use it */
 		temp_dword = mem_base + mem_length;
 		if ((mem_base) && (temp_dword < 0x10000)) {
 			mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL);
@@ -1348,8 +1340,9 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 			}
 		}
 
-		// If we've got a valid prefetchable memory base, and
-		// the base + length isn't greater than 0xFFFF
+		/* If we've got a valid prefetchable memory base, and
+		 * the base + length isn't greater than 0xFFFF
+		 */
 		temp_dword = pre_mem_base + pre_mem_length;
 		if ((pre_mem_base) && (temp_dword < 0x10000)) {
 			p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL);
@@ -1372,9 +1365,10 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 			}
 		}
 
-		// If we've got a valid bus number, use it
-		// The second condition is to ignore bus numbers on
-		// populated slots that don't have PCI-PCI bridges
+		/* If we've got a valid bus number, use it
+		 * The second condition is to ignore bus numbers on
+		 * populated slots that don't have PCI-PCI bridges
+		 */
 		if (secondary_bus && (secondary_bus != primary_bus)) {
 			bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL);
 			if (!bus_node)
@@ -1398,8 +1392,9 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st
 		one_slot += sizeof (struct slot_rt);
 	}
 
-	// If all of the following fail, we don't have any resources for
-	// hot plug add
+	/* If all of the following fail, we don't have any resources for
+	 * hot plug add
+	 */
 	rc = 1;
 	rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
 	rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index 42e4260..7485ffd 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -1318,7 +1318,6 @@ error:
 }
 
 struct hotplug_slot_ops ibmphp_hotplug_slot_ops = {
-	.owner =			THIS_MODULE,
 	.set_attention_status =		set_attention_status,
 	.enable_slot =			enable_slot,
 	.disable_slot =			ibmphp_disable_slot,
@@ -1421,3 +1420,4 @@ static void __exit ibmphp_exit(void)
 }
 
 module_init(ibmphp_init);
+module_exit(ibmphp_exit);
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 535fce0f..8445804 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -347,125 +347,129 @@ static struct pci_slot_attribute hotplug_slot_attr_test = {
 	.store = test_write_file
 };
 
-static int has_power_file(struct pci_slot *pci_slot)
+static bool has_power_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
-		return -ENODEV;
+		return false;
 	if ((slot->ops->enable_slot) ||
 	    (slot->ops->disable_slot) ||
 	    (slot->ops->get_power_status))
-		return 0;
-	return -ENOENT;
+		return true;
+	return false;
 }
 
-static int has_attention_file(struct pci_slot *pci_slot)
+static bool has_attention_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
-		return -ENODEV;
+		return false;
 	if ((slot->ops->set_attention_status) ||
 	    (slot->ops->get_attention_status))
-		return 0;
-	return -ENOENT;
+		return true;
+	return false;
 }
 
-static int has_latch_file(struct pci_slot *pci_slot)
+static bool has_latch_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
-		return -ENODEV;
+		return false;
 	if (slot->ops->get_latch_status)
-		return 0;
-	return -ENOENT;
+		return true;
+	return false;
 }
 
-static int has_adapter_file(struct pci_slot *pci_slot)
+static bool has_adapter_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
-		return -ENODEV;
+		return false;
 	if (slot->ops->get_adapter_status)
-		return 0;
-	return -ENOENT;
+		return true;
+	return false;
 }
 
-static int has_max_bus_speed_file(struct pci_slot *pci_slot)
+static bool has_max_bus_speed_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
-		return -ENODEV;
+		return false;
 	if (slot->ops->get_max_bus_speed)
-		return 0;
-	return -ENOENT;
+		return true;
+	return false;
 }
 
-static int has_cur_bus_speed_file(struct pci_slot *pci_slot)
+static bool has_cur_bus_speed_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
-		return -ENODEV;
+		return false;
 	if (slot->ops->get_cur_bus_speed)
-		return 0;
-	return -ENOENT;
+		return true;
+	return false;
 }
 
-static int has_test_file(struct pci_slot *pci_slot)
+static bool has_test_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
-		return -ENODEV;
+		return false;
 	if (slot->ops->hardware_test)
-		return 0;
-	return -ENOENT;
+		return true;
+	return false;
 }
 
 static int fs_add_slot(struct pci_slot *slot)
 {
 	int retval = 0;
 
-	if (has_power_file(slot) == 0) {
-		retval = sysfs_create_file(&slot->kobj, &hotplug_slot_attr_power.attr);
+	/* Create symbolic link to the hotplug driver module */
+	pci_hp_create_module_link(slot);
+
+	if (has_power_file(slot)) {
+		retval = sysfs_create_file(&slot->kobj,
+					   &hotplug_slot_attr_power.attr);
 		if (retval)
 			goto exit_power;
 	}
 
-	if (has_attention_file(slot) == 0) {
+	if (has_attention_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
 					   &hotplug_slot_attr_attention.attr);
 		if (retval)
 			goto exit_attention;
 	}
 
-	if (has_latch_file(slot) == 0) {
+	if (has_latch_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
 					   &hotplug_slot_attr_latch.attr);
 		if (retval)
 			goto exit_latch;
 	}
 
-	if (has_adapter_file(slot) == 0) {
+	if (has_adapter_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
 					   &hotplug_slot_attr_presence.attr);
 		if (retval)
 			goto exit_adapter;
 	}
 
-	if (has_max_bus_speed_file(slot) == 0) {
+	if (has_max_bus_speed_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
-					   &hotplug_slot_attr_max_bus_speed.attr);
+					&hotplug_slot_attr_max_bus_speed.attr);
 		if (retval)
 			goto exit_max_speed;
 	}
 
-	if (has_cur_bus_speed_file(slot) == 0) {
+	if (has_cur_bus_speed_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
-					   &hotplug_slot_attr_cur_bus_speed.attr);
+					&hotplug_slot_attr_cur_bus_speed.attr);
 		if (retval)
 			goto exit_cur_speed;
 	}
 
-	if (has_test_file(slot) == 0) {
+	if (has_test_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
 					   &hotplug_slot_attr_test.attr);
 		if (retval)
@@ -475,55 +479,61 @@ static int fs_add_slot(struct pci_slot *slot)
 	goto exit;
 
 exit_test:
-	if (has_cur_bus_speed_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_cur_bus_speed.attr);
-
+	if (has_cur_bus_speed_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_cur_bus_speed.attr);
 exit_cur_speed:
-	if (has_max_bus_speed_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr);
-
+	if (has_max_bus_speed_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_max_bus_speed.attr);
 exit_max_speed:
-	if (has_adapter_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr);
-
+	if (has_adapter_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_presence.attr);
 exit_adapter:
-	if (has_latch_file(slot) == 0)
+	if (has_latch_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_latch.attr);
-
 exit_latch:
-	if (has_attention_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_attention.attr);
-
+	if (has_attention_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_attention.attr);
 exit_attention:
-	if (has_power_file(slot) == 0)
+	if (has_power_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_power.attr);
 exit_power:
+	pci_hp_remove_module_link(slot);
 exit:
 	return retval;
 }
 
 static void fs_remove_slot(struct pci_slot *slot)
 {
-	if (has_power_file(slot) == 0)
+	if (has_power_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_power.attr);
 
-	if (has_attention_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_attention.attr);
+	if (has_attention_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_attention.attr);
 
-	if (has_latch_file(slot) == 0)
+	if (has_latch_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_latch.attr);
 
-	if (has_adapter_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr);
+	if (has_adapter_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_presence.attr);
 
-	if (has_max_bus_speed_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr);
+	if (has_max_bus_speed_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_max_bus_speed.attr);
 
-	if (has_cur_bus_speed_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_cur_bus_speed.attr);
+	if (has_cur_bus_speed_file(slot))
+		sysfs_remove_file(&slot->kobj,
+				  &hotplug_slot_attr_cur_bus_speed.attr);
 
-	if (has_test_file(slot) == 0)
+	if (has_test_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_test.attr);
+
+	pci_hp_remove_module_link(slot);
 }
 
 static struct hotplug_slot *get_slot_from_name (const char *name)
@@ -540,10 +550,10 @@ static struct hotplug_slot *get_slot_from_name (const char *name)
 }
 
 /**
- * pci_hp_register - register a hotplug_slot with the PCI hotplug subsystem
+ * __pci_hp_register - register a hotplug_slot with the PCI hotplug subsystem
  * @bus: bus this slot is on
  * @slot: pointer to the &struct hotplug_slot to register
- * @slot_nr: slot number
+ * @devnr: device number
  * @name: name registered with kobject core
  *
  * Registers a hotplug slot with the pci hotplug subsystem, which will allow
@@ -551,8 +561,9 @@ static struct hotplug_slot *get_slot_from_name (const char *name)
  *
  * Returns 0 if successful, anything else for an error.
  */
-int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr,
-			const char *name)
+int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus,
+		      int devnr, const char *name,
+		      struct module *owner, const char *mod_name)
 {
 	int result;
 	struct pci_slot *pci_slot;
@@ -567,14 +578,16 @@ int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr,
 		return -EINVAL;
 	}
 
-	mutex_lock(&pci_hp_mutex);
+	slot->ops->owner = owner;
+	slot->ops->mod_name = mod_name;
 
+	mutex_lock(&pci_hp_mutex);
 	/*
 	 * No problems if we call this interface from both ACPI_PCI_SLOT
 	 * driver and call it here again. If we've already created the
 	 * pci_slot, the interface will simply bump the refcount.
 	 */
-	pci_slot = pci_create_slot(bus, slot_nr, name, slot);
+	pci_slot = pci_create_slot(bus, devnr, name, slot);
 	if (IS_ERR(pci_slot)) {
 		result = PTR_ERR(pci_slot);
 		goto out;
@@ -684,6 +697,6 @@ MODULE_LICENSE("GPL");
 module_param(debug, bool, 0644);
 MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
 
-EXPORT_SYMBOL_GPL(pci_hp_register);
+EXPORT_SYMBOL_GPL(__pci_hp_register);
 EXPORT_SYMBOL_GPL(pci_hp_deregister);
 EXPORT_SYMBOL_GPL(pci_hp_change_slot_info);
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 0a36854..e6cf096 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -81,7 +81,6 @@ struct slot {
 	struct hpc_ops *hpc_ops;
 	struct hotplug_slot *hotplug_slot;
 	struct list_head	slot_list;
-	unsigned long last_emi_toggle;
 	struct delayed_work work;	/* work for button event */
 	struct mutex lock;
 };
@@ -203,8 +202,6 @@ struct hpc_ops {
 	int (*set_attention_status)(struct slot *slot, u8 status);
 	int (*get_latch_status)(struct slot *slot, u8 *status);
 	int (*get_adapter_status)(struct slot *slot, u8 *status);
-	int (*get_emi_status)(struct slot *slot, u8 *status);
-	int (*toggle_emi)(struct slot *slot);
 	int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
 	int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
 	int (*get_max_lnk_width)(struct slot *slot, enum pcie_link_width *val);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index fb254b2..2317557 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -73,7 +73,6 @@ static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *val
 static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 
 static struct hotplug_slot_ops pciehp_hotplug_slot_ops = {
-	.owner =		THIS_MODULE,
 	.set_attention_status =	set_attention_status,
 	.enable_slot =		enable_slot,
 	.disable_slot =		disable_slot,
@@ -85,99 +84,6 @@ static struct hotplug_slot_ops pciehp_hotplug_slot_ops = {
   	.get_cur_bus_speed =	get_cur_bus_speed,
 };
 
-/*
- * Check the status of the Electro Mechanical Interlock (EMI)
- */
-static int get_lock_status(struct hotplug_slot *hotplug_slot, u8 *value)
-{
-	struct slot *slot = hotplug_slot->private;
-	return (slot->hpc_ops->get_emi_status(slot, value));
-}
-
-/*
- * sysfs interface for the Electro Mechanical Interlock (EMI)
- * 1 == locked, 0 == unlocked
- */
-static ssize_t lock_read_file(struct hotplug_slot *slot, char *buf)
-{
-	int retval;
-	u8 value;
-
-	retval = get_lock_status(slot, &value);
-	if (retval)
-		goto lock_read_exit;
-	retval = sprintf (buf, "%d\n", value);
-
-lock_read_exit:
-	return retval;
-}
-
-/*
- * Change the status of the Electro Mechanical Interlock (EMI)
- * This is a toggle - in addition there must be at least 1 second
- * in between toggles.
- */
-static int set_lock_status(struct hotplug_slot *hotplug_slot, u8 status)
-{
-	struct slot *slot = hotplug_slot->private;
-	int retval;
-	u8 value;
-
-	mutex_lock(&slot->ctrl->crit_sect);
-
-	/* has it been >1 sec since our last toggle? */
-	if ((get_seconds() - slot->last_emi_toggle) < 1) {
-		mutex_unlock(&slot->ctrl->crit_sect);
-		return -EINVAL;
-	}
-
-	/* see what our current state is */
-	retval = get_lock_status(hotplug_slot, &value);
-	if (retval || (value == status))
-		goto set_lock_exit;
-
-	slot->hpc_ops->toggle_emi(slot);
-set_lock_exit:
-	mutex_unlock(&slot->ctrl->crit_sect);
-	return 0;
-}
-
-/*
- * sysfs interface which allows the user to toggle the Electro Mechanical
- * Interlock.  Valid values are either 0 or 1.  0 == unlock, 1 == lock
- */
-static ssize_t lock_write_file(struct hotplug_slot *hotplug_slot,
-		const char *buf, size_t count)
-{
-	struct slot *slot = hotplug_slot->private;
-	unsigned long llock;
-	u8 lock;
-	int retval = 0;
-
-	llock = simple_strtoul(buf, NULL, 10);
-	lock = (u8)(llock & 0xff);
-
-	switch (lock) {
-		case 0:
-		case 1:
-			retval = set_lock_status(hotplug_slot, lock);
-			break;
-		default:
-			ctrl_err(slot->ctrl, "%d is an invalid lock value\n",
-				 lock);
-			retval = -EINVAL;
-	}
-	if (retval)
-		return retval;
-	return count;
-}
-
-static struct hotplug_slot_attribute hotplug_slot_attr_lock = {
-	.attr = {.name = "lock", .mode = S_IFREG | S_IRUGO | S_IWUSR},
-	.show = lock_read_file,
-	.store = lock_write_file
-};
-
 /**
  * release_slot - free up the memory used by a slot
  * @hotplug_slot: slot to free
@@ -236,17 +142,6 @@ static int init_slots(struct controller *ctrl)
 		get_attention_status(hotplug_slot, &info->attention_status);
 		get_latch_status(hotplug_slot, &info->latch_status);
 		get_adapter_status(hotplug_slot, &info->adapter_status);
-		/* create additional sysfs entries */
-		if (EMI(ctrl)) {
-			retval = sysfs_create_file(&hotplug_slot->pci_slot->kobj,
-				&hotplug_slot_attr_lock.attr);
-			if (retval) {
-				pci_hp_deregister(hotplug_slot);
-				ctrl_err(ctrl, "Cannot create additional sysfs "
-					 "entries\n");
-				goto error_info;
-			}
-		}
 	}
 
 	return 0;
@@ -261,13 +156,8 @@ error:
 static void cleanup_slots(struct controller *ctrl)
 {
 	struct slot *slot;
-
-	list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
-		if (EMI(ctrl))
-			sysfs_remove_file(&slot->hotplug_slot->pci_slot->kobj,
-				&hotplug_slot_attr_lock.attr);
+	list_for_each_entry(slot, &ctrl->slot_list, slot_list)
 		pci_hp_deregister(slot->hotplug_slot);
-	}
 }
 
 /*
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 07bd321..5281325 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -422,35 +422,6 @@ static int hpc_query_power_fault(struct slot *slot)
 	return !!(slot_status & PCI_EXP_SLTSTA_PFD);
 }
 
-static int hpc_get_emi_status(struct slot *slot, u8 *status)
-{
-	struct controller *ctrl = slot->ctrl;
-	u16 slot_status;
-	int retval;
-
-	retval = pciehp_readw(ctrl, PCI_EXP_SLTSTA, &slot_status);
-	if (retval) {
-		ctrl_err(ctrl, "Cannot check EMI status\n");
-		return retval;
-	}
-	*status = !!(slot_status & PCI_EXP_SLTSTA_EIS);
-	return retval;
-}
-
-static int hpc_toggle_emi(struct slot *slot)
-{
-	u16 slot_cmd;
-	u16 cmd_mask;
-	int rc;
-
-	slot_cmd = PCI_EXP_SLTCTL_EIC;
-	cmd_mask = PCI_EXP_SLTCTL_EIC;
-	rc = pcie_write_cmd(slot->ctrl, slot_cmd, cmd_mask);
-	slot->last_emi_toggle = get_seconds();
-
-	return rc;
-}
-
 static int hpc_set_attention_status(struct slot *slot, u8 value)
 {
 	struct controller *ctrl = slot->ctrl;
@@ -874,8 +845,6 @@ static struct hpc_ops pciehp_hpc_ops = {
 	.get_attention_status		= hpc_get_attention_status,
 	.get_latch_status		= hpc_get_latch_status,
 	.get_adapter_status		= hpc_get_adapter_status,
-	.get_emi_status			= hpc_get_emi_status,
-	.toggle_emi			= hpc_toggle_emi,
 
 	.get_max_bus_speed		= hpc_get_max_lnk_speed,
 	.get_cur_bus_speed		= hpc_get_cur_lnk_speed,
diff --git a/drivers/pci/hotplug/pcihp_skeleton.c b/drivers/pci/hotplug/pcihp_skeleton.c
index e3dd6cf..5175d9b 100644
--- a/drivers/pci/hotplug/pcihp_skeleton.c
+++ b/drivers/pci/hotplug/pcihp_skeleton.c
@@ -82,7 +82,6 @@ static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
 
 static struct hotplug_slot_ops skel_hotplug_slot_ops = {
-	.owner =		THIS_MODULE,
 	.enable_slot =		enable_slot,
 	.disable_slot =		disable_slot,
 	.set_attention_status =	set_attention_status,
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index 95d02a0..c159223 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -423,7 +423,6 @@ static int disable_slot(struct hotplug_slot *hotplug_slot)
 }
 
 struct hotplug_slot_ops rpaphp_hotplug_slot_ops = {
-	.owner = THIS_MODULE,
 	.enable_slot = enable_slot,
 	.disable_slot = disable_slot,
 	.set_attention_status = set_attention_status,
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index 2d6da78..a4494d7 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -83,7 +83,6 @@ static int disable_slot(struct hotplug_slot *slot);
 static inline int get_power_status(struct hotplug_slot *slot, u8 *value);
 
 static struct hotplug_slot_ops sn_hotplug_slot_ops = {
-	.owner                  = THIS_MODULE,
 	.enable_slot            = enable_slot,
 	.disable_slot           = disable_slot,
 	.get_power_status       = get_power_status,
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index fe8d149..8a520a3 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -69,7 +69,6 @@ static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *val
 static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 
 static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
-	.owner =		THIS_MODULE,
 	.set_attention_status =	set_attention_status,
 	.enable_slot =		enable_slot,
 	.disable_slot =		disable_slot,