Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM platform updates from Russell King:
 "This covers platform stuff for platforms I have a direct interest in
  (iow, I have the hardware).  Essentially:
   - as we no longer support any other Acorn platforms other than RiscPC
     anymore, we can collect all that code into mach-rpc.
   - convert Acorn expansion card stuff to use IRQ allocation functions,
     and get rid of NO_IRQ from there.
   - cleanups to the ebsa110 platform to move some private stuff out of
     its header files.
   - large amount of SA11x0 updates:
   - conversion of private DMA implementation to DMA engine support
     (this actually gives us greater flexibility in drivers over the old
     API.)
   - re-worked ucb1x00 updates - convert to genirq, remove sa11x0
     dependencies, fix various minor issues
   - move platform specific sa11x0 framebuffer data into platform files
     in arch/arm instead of keeping this in the driver itself
   - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
     for SIR transmissions as well as FIR
   - rework sa1111 support for genirq, and irq allocation
   - fix sa1111 IRQ support so it works again
   - use sparse IRQ support

  After this, I have one more pull request remaining from my current
  set, which I think is going to be the most problematical as it
  generates 8 conflicts."

Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.

* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
  ARM: 7343/1: sa11x0: convert to sparse IRQ
  ARM: 7342/2: sa1100: prepare for sparse irq conversion
  ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
  ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
  ARM: sa11x0: remove unused DMA controller definitions
  ARM: sa11x0: remove old SoC private DMA driver
  USB: sa1111: add hcd .reset method
  USB: sa1111: add OHCI shutdown methods
  USB: sa1111: reorganize ohci-sa1111.c
  USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
  USB: sa1111: sparse and checkpatch cleanups
  ARM: sa11x0: don't static map sa1111
  ARM: sa1111: use dev_err() rather than printk()
  ARM: sa1111: cleanup sub-device registration and unregistration
  ARM: sa1111: only setup DMA for DMA capable devices
  ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
  ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
  ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
  ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
  ARM: sa1111: delete unused physical GPIO register definitions
  ...

2 files changed, 49 insertions, 13 deletions

diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index ef5848f..70f728c 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -22,6 +22,40 @@
 
 #include "sa1111_generic.h"
 
+/*
+ * These are offsets from the above base.
+ */
+#define PCCR	0x0000
+#define PCSSR	0x0004
+#define PCSR	0x0008
+
+#define PCSR_S0_READY	(1<<0)
+#define PCSR_S1_READY	(1<<1)
+#define PCSR_S0_DETECT	(1<<2)
+#define PCSR_S1_DETECT	(1<<3)
+#define PCSR_S0_VS1	(1<<4)
+#define PCSR_S0_VS2	(1<<5)
+#define PCSR_S1_VS1	(1<<6)
+#define PCSR_S1_VS2	(1<<7)
+#define PCSR_S0_WP	(1<<8)
+#define PCSR_S1_WP	(1<<9)
+#define PCSR_S0_BVD1	(1<<10)
+#define PCSR_S0_BVD2	(1<<11)
+#define PCSR_S1_BVD1	(1<<12)
+#define PCSR_S1_BVD2	(1<<13)
+
+#define PCCR_S0_RST	(1<<0)
+#define PCCR_S1_RST	(1<<1)
+#define PCCR_S0_FLT	(1<<2)
+#define PCCR_S1_FLT	(1<<3)
+#define PCCR_S0_PWAITEN	(1<<4)
+#define PCCR_S1_PWAITEN	(1<<5)
+#define PCCR_S0_PSE	(1<<6)
+#define PCCR_S1_PSE	(1<<7)
+
+#define PCSSR_S0_SLEEP	(1<<0)
+#define PCSSR_S1_SLEEP	(1<<1)
+
 #define IDX_IRQ_S0_READY_NINT	(0)
 #define IDX_IRQ_S0_CD_VALID	(1)
 #define IDX_IRQ_S0_BVD1_STSCHG	(2)
@@ -32,7 +66,7 @@
 void sa1111_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
 {
 	struct sa1111_pcmcia_socket *s = to_skt(skt);
-	unsigned long status = sa1111_readl(s->dev->mapbase + SA1111_PCSR);
+	unsigned long status = sa1111_readl(s->dev->mapbase + PCSR);
 
 	switch (skt->nr) {
 	case 0:
@@ -88,10 +122,10 @@ int sa1111_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s
 		pccr_set_mask |= PCCR_S0_FLT|PCCR_S1_FLT;
 
 	local_irq_save(flags);
-	val = sa1111_readl(s->dev->mapbase + SA1111_PCCR);
+	val = sa1111_readl(s->dev->mapbase + PCCR);
 	val &= ~pccr_skt_mask;
 	val |= pccr_set_mask & pccr_skt_mask;
-	sa1111_writel(val, s->dev->mapbase + SA1111_PCCR);
+	sa1111_writel(val, s->dev->mapbase + PCCR);
 	local_irq_restore(flags);
 
 	return 0;
@@ -141,20 +175,26 @@ int sa1111_pcmcia_add(struct sa1111_dev *dev, struct pcmcia_low_level *ops,
 static int pcmcia_probe(struct sa1111_dev *dev)
 {
 	void __iomem *base;
+	int ret;
+
+	ret = sa1111_enable_device(dev);
+	if (ret)
+		return ret;
 
 	dev_set_drvdata(&dev->dev, NULL);
 
-	if (!request_mem_region(dev->res.start, 512,
-				SA1111_DRIVER_NAME(dev)))
+	if (!request_mem_region(dev->res.start, 512, SA1111_DRIVER_NAME(dev))) {
+		sa1111_disable_device(dev);
 		return -EBUSY;
+	}
 
 	base = dev->mapbase;
 
 	/*
 	 * Initialise the suspend state.
 	 */
-	sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + SA1111_PCSSR);
-	sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + SA1111_PCCR);
+	sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + PCSSR);
+	sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + PCCR);
 
 #ifdef CONFIG_SA1100_BADGE4
 	pcmcia_badge4_init(&dev->dev);
@@ -184,6 +224,7 @@ static int __devexit pcmcia_remove(struct sa1111_dev *dev)
 	}
 
 	release_mem_region(dev->res.start, 512);
+	sa1111_disable_device(dev);
 	return 0;
 }
 
diff --git a/drivers/pcmcia/sa1111_neponset.c b/drivers/pcmcia/sa1111_neponset.c
index 50f297d..1d78739 100644
--- a/drivers/pcmcia/sa1111_neponset.c
+++ b/drivers/pcmcia/sa1111_neponset.c
@@ -94,12 +94,7 @@ neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_sta
 
 	ret = sa1111_pcmcia_configure_socket(skt, state);
 	if (ret == 0) {
-		unsigned long flags;
-
-		local_irq_save(flags);
-		NCR_0 = (NCR_0 & ~ncr_mask) | ncr_set;
-
-		local_irq_restore(flags);
+		neponset_ncr_frob(ncr_mask, ncr_set);
 		sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
 	}