Merge tag 'pinctrl-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control patches for the v4.5 series.

  Notably I have a patch to driver core from Stephen Boyd in the pull
  request, this has been ACKed by Greg so it should be OK.  The internal
  API needed some tweaking to allow modular Qualcomm pin controllers.

  There is a bit of development history in here but it should all add up
  nicely and has boiled in linux-next.  For example I merged in v4.4-rc5
  to get rid of some nasty merge conflicts.

  Summary:

   - New drivers:
      - PXA2xx pin controller support
      - Broadcom NSP pin controller support

   - New subdrivers:
      - Samsung EXYNOS5410 support
      - Qualcomm MSM8996 support
      - Qualcomm PM8994 support
      - Qualcomm PM8994 MPP support
      - Allwinner sunxi H3 support
      - Allwinner sunxi A80 support
      - Rockchip RK3228 support

   - Rename the Cygnus pinctrl driver to "iproc" as it is more generic
     than was originally thought.

   - A bunch of Lantiq/Xway updates especially from the OpenWRT people.

   - Several refactorings for the Super-H SH PFC pin controllers.
     Adding SCIF_CLK support.

   - Several fixes to the Atlas 7 driver.

   - Various fixes all over the place"

* tag 'pinctrl-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits)
  pinctrl: mediatek: Modify pinctrl bindings for mt2701
  Revert "pinctrl: qcom: make PMIC drivers bool"
  pinctrl: qcom: Use platform_irq_count() instead of of_irq_count()
  driver-core: platform: Add platform_irq_count()
  pinctrl: lantiq: 2 pins have the wrong mux list
  pinctrl: qcom: make PMIC drivers bool
  pinctrl: nsp-gpio: forever loop in nsp_gpio_get_strength()
  pinctrl: mediatek: convert to arch_initcall
  pinctrl: bcm2835: Fix memory leak in error path
  pinctrl: mediatek: add missing of_node_put
  pinctrl: rockchip: add missing of_node_put
  pinctrl: sh-pfc: add missing of_node_put
  pinctrl: sirf: add missing of_node_put
  pinctrl-tegra: add missing of_node_put
  pinctrl: sunxi: Add A80 special pin controller
  pinctrl: bcm/cygnys/iproc: fixup rebase issue
  pinctrl: fixup problematic flag
  MAINTAINERS: Add co-maintainer for Renesas Pin Controllers
  pinctrl: sh-pfc: r8a7791: add EtherAVB pin groups
  pinctrl: sh-pfc: r8a7795: Add SATA support
  ...

5 files changed, 958 insertions, 202 deletions

diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index cd11d4d..2cc7438 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -9,6 +9,7 @@ config PINCTRL_BCM281XX
 	select PINCONF
 	select GENERIC_PINCONF
 	select REGMAP_MMIO
+	default ARCH_BCM_MOBILE
 	help
 	  Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
 	  for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
@@ -20,27 +21,41 @@ config PINCTRL_BCM2835
 	select PINMUX
 	select PINCONF
 
-config PINCTRL_CYGNUS_GPIO
-	bool "Broadcom Cygnus GPIO (with PINCONF) driver"
-	depends on OF_GPIO && ARCH_BCM_CYGNUS
+config PINCTRL_IPROC_GPIO
+	bool "Broadcom iProc GPIO (with PINCONF) driver"
+	depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
 	select GPIOLIB_IRQCHIP
 	select PINCONF
 	select GENERIC_PINCONF
-	default ARCH_BCM_CYGNUS
+	default ARCH_BCM_IPROC
 	help
-	  Say yes here to enable the Broadcom Cygnus GPIO driver.
+	  Say yes here to enable the Broadcom iProc GPIO driver.
+
+	  The Broadcom iProc based SoCs- Cygnus, NS2, NSP and Stingray, use
+	  same GPIO Controller IP hence this driver could be used for all.
 
 	  The Broadcom Cygnus SoC has 3 GPIO controllers including the ASIU
 	  GPIO controller (ASIU), the chipCommonG GPIO controller (CCM), and
 	  the always-ON GPIO controller (CRMU/AON). All 3 GPIO controllers are
 	  supported by this driver.
 
-	  All 3 Cygnus GPIO controllers support basic PINCONF functions such
+	  The Broadcom NSP has two GPIO controllers including the ChipcommonA
+	  GPIO, the ChipcommonB GPIO. Later controller is supported by this
+	  driver.
+
+	  The Broadcom NS2 has two GPIO controller including the CRMU GPIO,
+	  the ChipcommonG GPIO. Both controllers are supported by this driver.
+
+	  The Broadcom Stingray GPIO controllers are supported by this driver.
+
+	  All above SoCs GPIO controllers support basic PINCONF functions such
 	  as bias pull up, pull down, and drive strength configurations, when
 	  these pins are muxed to GPIO.
 
-	  Pins from the ASIU GPIO can be individually muxed to GPIO function,
-	  through interaction with the Cygnus IOMUX controller.
+	  It provides the framework where pins from the individual GPIO can be
+	  individually muxed to GPIO function, through interaction with the
+	  SoCs IOMUX controller. This features could be used only on SoCs which
+	  support individual pin muxing.
 
 config PINCTRL_CYGNUS_MUX
 	bool "Broadcom Cygnus IOMUX driver"
@@ -54,3 +69,20 @@ config PINCTRL_CYGNUS_MUX
 	  The Broadcom Cygnus IOMUX driver supports group based IOMUX
 	  configuration, with the exception that certain individual pins
 	  can be overrided to GPIO function
+
+config PINCTRL_NSP_GPIO
+	bool "Broadcom NSP GPIO (with PINCONF) driver"
+	depends on OF_GPIO && (ARCH_BCM_NSP || COMPILE_TEST)
+	select GPIOLIB_IRQCHIP
+	select PINCONF
+	select GENERIC_PINCONF
+	default ARCH_BCM_NSP
+	help
+	  Say yes here to enable the Broadcom NSP GPIO driver.
+
+	  The Broadcom Northstar Plus SoC ChipcommonA GPIO controller is
+	  supported by this driver.
+
+	  The ChipcommonA GPIO controller support basic PINCONF functions such
+	  as bias pull up, pull down, and drive strength configurations, when
+	  these pins are muxed to GPIO.
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 2b2f70e..6148367d 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -2,5 +2,6 @@
 
 obj-$(CONFIG_PINCTRL_BCM281XX)		+= pinctrl-bcm281xx.o
 obj-$(CONFIG_PINCTRL_BCM2835)		+= pinctrl-bcm2835.o
-obj-$(CONFIG_PINCTRL_CYGNUS_GPIO)	+= pinctrl-cygnus-gpio.o
+obj-$(CONFIG_PINCTRL_IPROC_GPIO)	+= pinctrl-iproc-gpio.o
 obj-$(CONFIG_PINCTRL_CYGNUS_MUX)	+= pinctrl-cygnus-mux.o
+obj-$(CONFIG_PINCTRL_NSP_GPIO)		+= pinctrl-nsp-gpio.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 2e6ca69..75b0d8c 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -795,7 +795,7 @@ static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
 	return 0;
 
 out:
-	kfree(maps);
+	bcm2835_pctl_dt_free_map(pctldev, maps, num_pins * maps_per_pin);
 	return err;
 }
 
diff --git a/drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
index 12a48f4..314591a 100644
--- a/drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c
+++ b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
@@ -10,14 +10,16 @@
  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * This file contains the Broadcom Cygnus GPIO driver that supports 3
- * GPIO controllers on Cygnus including the ASIU GPIO controller, the
+ * This file contains the Broadcom Iproc GPIO driver that supports 3
+ * GPIO controllers on Iproc including the ASIU GPIO controller, the
  * chipCommonG GPIO controller, and the always-on GPIO controller. Basic
  * PINCONF such as bias pull up/down, and drive strength are also supported
  * in this driver.
  *
- * Pins from the ASIU GPIO can be individually muxed to GPIO function,
- * through the interaction with the Cygnus IOMUX controller
+ * It provides the functionality where pins from the GPIO can be
+ * individually muxed to GPIO function, if individual pad
+ * configuration is supported, through the interaction with respective
+ * SoCs IOMUX controller.
  */
 
 #include <linux/kernel.h>
@@ -34,42 +36,42 @@
 
 #include "../pinctrl-utils.h"
 
-#define CYGNUS_GPIO_DATA_IN_OFFSET   0x00
-#define CYGNUS_GPIO_DATA_OUT_OFFSET  0x04
-#define CYGNUS_GPIO_OUT_EN_OFFSET    0x08
-#define CYGNUS_GPIO_INT_TYPE_OFFSET  0x0c
-#define CYGNUS_GPIO_INT_DE_OFFSET    0x10
-#define CYGNUS_GPIO_INT_EDGE_OFFSET  0x14
-#define CYGNUS_GPIO_INT_MSK_OFFSET   0x18
-#define CYGNUS_GPIO_INT_STAT_OFFSET  0x1c
-#define CYGNUS_GPIO_INT_MSTAT_OFFSET 0x20
-#define CYGNUS_GPIO_INT_CLR_OFFSET   0x24
-#define CYGNUS_GPIO_PAD_RES_OFFSET   0x34
-#define CYGNUS_GPIO_RES_EN_OFFSET    0x38
+#define IPROC_GPIO_DATA_IN_OFFSET   0x00
+#define IPROC_GPIO_DATA_OUT_OFFSET  0x04
+#define IPROC_GPIO_OUT_EN_OFFSET    0x08
+#define IPROC_GPIO_INT_TYPE_OFFSET  0x0c
+#define IPROC_GPIO_INT_DE_OFFSET    0x10
+#define IPROC_GPIO_INT_EDGE_OFFSET  0x14
+#define IPROC_GPIO_INT_MSK_OFFSET   0x18
+#define IPROC_GPIO_INT_STAT_OFFSET  0x1c
+#define IPROC_GPIO_INT_MSTAT_OFFSET 0x20
+#define IPROC_GPIO_INT_CLR_OFFSET   0x24
+#define IPROC_GPIO_PAD_RES_OFFSET   0x34
+#define IPROC_GPIO_RES_EN_OFFSET    0x38
 
 /* drive strength control for ASIU GPIO */
-#define CYGNUS_GPIO_ASIU_DRV0_CTRL_OFFSET 0x58
+#define IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET 0x58
 
 /* drive strength control for CCM/CRMU (AON) GPIO */
-#define CYGNUS_GPIO_DRV0_CTRL_OFFSET  0x00
+#define IPROC_GPIO_DRV0_CTRL_OFFSET  0x00
 
 #define GPIO_BANK_SIZE 0x200
 #define NGPIOS_PER_BANK 32
 #define GPIO_BANK(pin) ((pin) / NGPIOS_PER_BANK)
 
-#define CYGNUS_GPIO_REG(pin, reg) (GPIO_BANK(pin) * GPIO_BANK_SIZE + (reg))
-#define CYGNUS_GPIO_SHIFT(pin) ((pin) % NGPIOS_PER_BANK)
+#define IPROC_GPIO_REG(pin, reg) (GPIO_BANK(pin) * GPIO_BANK_SIZE + (reg))
+#define IPROC_GPIO_SHIFT(pin) ((pin) % NGPIOS_PER_BANK)
 
 #define GPIO_DRV_STRENGTH_BIT_SHIFT  20
 #define GPIO_DRV_STRENGTH_BITS       3
 #define GPIO_DRV_STRENGTH_BIT_MASK   ((1 << GPIO_DRV_STRENGTH_BITS) - 1)
 
 /*
- * Cygnus GPIO core
+ * Iproc GPIO core
  *
  * @dev: pointer to device
- * @base: I/O register base for Cygnus GPIO controller
- * @io_ctrl: I/O register base for certain type of Cygnus GPIO controller that
+ * @base: I/O register base for Iproc GPIO controller
+ * @io_ctrl: I/O register base for certain type of Iproc GPIO controller that
  * has the PINCONF support implemented outside of the GPIO block
  * @lock: lock to protect access to I/O registers
  * @gc: GPIO chip
@@ -79,7 +81,7 @@
  * @pctl: pointer to pinctrl_dev
  * @pctldesc: pinctrl descriptor
  */
-struct cygnus_gpio {
+struct iproc_gpio {
 	struct device *dev;
 
 	void __iomem *base;
@@ -96,33 +98,33 @@ struct cygnus_gpio {
 	struct pinctrl_desc pctldesc;
 };
 
-static inline struct cygnus_gpio *to_cygnus_gpio(struct gpio_chip *gc)
+static inline struct iproc_gpio *to_iproc_gpio(struct gpio_chip *gc)
 {
-	return container_of(gc, struct cygnus_gpio, gc);
+	return container_of(gc, struct iproc_gpio, gc);
 }
 
 /*
  * Mapping from PINCONF pins to GPIO pins is 1-to-1
  */
-static inline unsigned cygnus_pin_to_gpio(unsigned pin)
+static inline unsigned iproc_pin_to_gpio(unsigned pin)
 {
 	return pin;
 }
 
 /**
- *  cygnus_set_bit - set or clear one bit (corresponding to the GPIO pin) in a
- *  Cygnus GPIO register
+ *  iproc_set_bit - set or clear one bit (corresponding to the GPIO pin) in a
+ *  Iproc GPIO register
  *
- *  @cygnus_gpio: Cygnus GPIO device
+ *  @iproc_gpio: Iproc GPIO device
  *  @reg: register offset
  *  @gpio: GPIO pin
  *  @set: set or clear
  */
-static inline void cygnus_set_bit(struct cygnus_gpio *chip, unsigned int reg,
+static inline void iproc_set_bit(struct iproc_gpio *chip, unsigned int reg,
 				  unsigned gpio, bool set)
 {
-	unsigned int offset = CYGNUS_GPIO_REG(gpio, reg);
-	unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
+	unsigned int offset = IPROC_GPIO_REG(gpio, reg);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
 	u32 val;
 
 	val = readl(chip->base + offset);
@@ -133,19 +135,19 @@ static inline void cygnus_set_bit(struct cygnus_gpio *chip, unsigned int reg,
 	writel(val, chip->base + offset);
 }
 
-static inline bool cygnus_get_bit(struct cygnus_gpio *chip, unsigned int reg,
+static inline bool iproc_get_bit(struct iproc_gpio *chip, unsigned int reg,
 				  unsigned gpio)
 {
-	unsigned int offset = CYGNUS_GPIO_REG(gpio, reg);
-	unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
+	unsigned int offset = IPROC_GPIO_REG(gpio, reg);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
 
 	return !!(readl(chip->base + offset) & BIT(shift));
 }
 
-static void cygnus_gpio_irq_handler(struct irq_desc *desc)
+static void iproc_gpio_irq_handler(struct irq_desc *desc)
 {
 	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
 	int i, bit;
 
@@ -154,7 +156,7 @@ static void cygnus_gpio_irq_handler(struct irq_desc *desc)
 	/* go through the entire GPIO banks and handle all interrupts */
 	for (i = 0; i < chip->num_banks; i++) {
 		unsigned long val = readl(chip->base + (i * GPIO_BANK_SIZE) +
-					  CYGNUS_GPIO_INT_MSTAT_OFFSET);
+					  IPROC_GPIO_INT_MSTAT_OFFSET);
 
 		for_each_set_bit(bit, &val, NGPIOS_PER_BANK) {
 			unsigned pin = NGPIOS_PER_BANK * i + bit;
@@ -165,7 +167,7 @@ static void cygnus_gpio_irq_handler(struct irq_desc *desc)
 			 * handler, so we do not leave any window
 			 */
 			writel(BIT(bit), chip->base + (i * GPIO_BANK_SIZE) +
-			       CYGNUS_GPIO_INT_CLR_OFFSET);
+			       IPROC_GPIO_INT_CLR_OFFSET);
 
 			generic_handle_irq(child_irq);
 		}
@@ -175,60 +177,60 @@ static void cygnus_gpio_irq_handler(struct irq_desc *desc)
 }
 
 
-static void cygnus_gpio_irq_ack(struct irq_data *d)
+static void iproc_gpio_irq_ack(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned gpio = d->hwirq;
-	unsigned int offset = CYGNUS_GPIO_REG(gpio,
-			CYGNUS_GPIO_INT_CLR_OFFSET);
-	unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
+	unsigned int offset = IPROC_GPIO_REG(gpio,
+			IPROC_GPIO_INT_CLR_OFFSET);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
 	u32 val = BIT(shift);
 
 	writel(val, chip->base + offset);
 }
 
 /**
- *  cygnus_gpio_irq_set_mask - mask/unmask a GPIO interrupt
+ *  iproc_gpio_irq_set_mask - mask/unmask a GPIO interrupt
  *
  *  @d: IRQ chip data
  *  @unmask: mask/unmask GPIO interrupt
  */
-static void cygnus_gpio_irq_set_mask(struct irq_data *d, bool unmask)
+static void iproc_gpio_irq_set_mask(struct irq_data *d, bool unmask)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned gpio = d->hwirq;
 
-	cygnus_set_bit(chip, CYGNUS_GPIO_INT_MSK_OFFSET, gpio, unmask);
+	iproc_set_bit(chip, IPROC_GPIO_INT_MSK_OFFSET, gpio, unmask);
 }
 
-static void cygnus_gpio_irq_mask(struct irq_data *d)
+static void iproc_gpio_irq_mask(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->lock, flags);
-	cygnus_gpio_irq_set_mask(d, false);
+	iproc_gpio_irq_set_mask(d, false);
 	spin_unlock_irqrestore(&chip->lock, flags);
 }
 
-static void cygnus_gpio_irq_unmask(struct irq_data *d)
+static void iproc_gpio_irq_unmask(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->lock, flags);
-	cygnus_gpio_irq_set_mask(d, true);
+	iproc_gpio_irq_set_mask(d, true);
 	spin_unlock_irqrestore(&chip->lock, flags);
 }
 
-static int cygnus_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+static int iproc_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned gpio = d->hwirq;
 	bool level_triggered = false;
 	bool dual_edge = false;
@@ -263,10 +265,10 @@ static int cygnus_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	}
 
 	spin_lock_irqsave(&chip->lock, flags);
-	cygnus_set_bit(chip, CYGNUS_GPIO_INT_TYPE_OFFSET, gpio,
+	iproc_set_bit(chip, IPROC_GPIO_INT_TYPE_OFFSET, gpio,
 		       level_triggered);
-	cygnus_set_bit(chip, CYGNUS_GPIO_INT_DE_OFFSET, gpio, dual_edge);
-	cygnus_set_bit(chip, CYGNUS_GPIO_INT_EDGE_OFFSET, gpio,
+	iproc_set_bit(chip, IPROC_GPIO_INT_DE_OFFSET, gpio, dual_edge);
+	iproc_set_bit(chip, IPROC_GPIO_INT_EDGE_OFFSET, gpio,
 		       rising_or_high);
 	spin_unlock_irqrestore(&chip->lock, flags);
 
@@ -277,32 +279,32 @@ static int cygnus_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	return 0;
 }
 
-static struct irq_chip cygnus_gpio_irq_chip = {
-	.name = "bcm-cygnus-gpio",
-	.irq_ack = cygnus_gpio_irq_ack,
-	.irq_mask = cygnus_gpio_irq_mask,
-	.irq_unmask = cygnus_gpio_irq_unmask,
-	.irq_set_type = cygnus_gpio_irq_set_type,
+static struct irq_chip iproc_gpio_irq_chip = {
+	.name = "bcm-iproc-gpio",
+	.irq_ack = iproc_gpio_irq_ack,
+	.irq_mask = iproc_gpio_irq_mask,
+	.irq_unmask = iproc_gpio_irq_unmask,
+	.irq_set_type = iproc_gpio_irq_set_type,
 };
 
 /*
- * Request the Cygnus IOMUX pinmux controller to mux individual pins to GPIO
+ * Request the Iproc IOMUX pinmux controller to mux individual pins to GPIO
  */
-static int cygnus_gpio_request(struct gpio_chip *gc, unsigned offset)
+static int iproc_gpio_request(struct gpio_chip *gc, unsigned offset)
 {
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned gpio = gc->base + offset;
 
-	/* not all Cygnus GPIO pins can be muxed individually */
+	/* not all Iproc GPIO pins can be muxed individually */
 	if (!chip->pinmux_is_supported)
 		return 0;
 
 	return pinctrl_request_gpio(gpio);
 }
 
-static void cygnus_gpio_free(struct gpio_chip *gc, unsigned offset)
+static void iproc_gpio_free(struct gpio_chip *gc, unsigned offset)
 {
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned gpio = gc->base + offset;
 
 	if (!chip->pinmux_is_supported)
@@ -311,13 +313,13 @@ static void cygnus_gpio_free(struct gpio_chip *gc, unsigned offset)
 	pinctrl_free_gpio(gpio);
 }
 
-static int cygnus_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
+static int iproc_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
 {
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->lock, flags);
-	cygnus_set_bit(chip, CYGNUS_GPIO_OUT_EN_OFFSET, gpio, false);
+	iproc_set_bit(chip, IPROC_GPIO_OUT_EN_OFFSET, gpio, false);
 	spin_unlock_irqrestore(&chip->lock, flags);
 
 	dev_dbg(chip->dev, "gpio:%u set input\n", gpio);
@@ -325,15 +327,15 @@ static int cygnus_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
 	return 0;
 }
 
-static int cygnus_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
+static int iproc_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
 					int val)
 {
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->lock, flags);
-	cygnus_set_bit(chip, CYGNUS_GPIO_OUT_EN_OFFSET, gpio, true);
-	cygnus_set_bit(chip, CYGNUS_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
+	iproc_set_bit(chip, IPROC_GPIO_OUT_EN_OFFSET, gpio, true);
+	iproc_set_bit(chip, IPROC_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
 	spin_unlock_irqrestore(&chip->lock, flags);
 
 	dev_dbg(chip->dev, "gpio:%u set output, value:%d\n", gpio, val);
@@ -341,29 +343,29 @@ static int cygnus_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
 	return 0;
 }
 
-static void cygnus_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
+static void iproc_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
 {
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->lock, flags);
-	cygnus_set_bit(chip, CYGNUS_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
+	iproc_set_bit(chip, IPROC_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
 	spin_unlock_irqrestore(&chip->lock, flags);
 
 	dev_dbg(chip->dev, "gpio:%u set, value:%d\n", gpio, val);
 }
 
-static int cygnus_gpio_get(struct gpio_chip *gc, unsigned gpio)
+static int iproc_gpio_get(struct gpio_chip *gc, unsigned gpio)
 {
-	struct cygnus_gpio *chip = to_cygnus_gpio(gc);
-	unsigned int offset = CYGNUS_GPIO_REG(gpio,
-					      CYGNUS_GPIO_DATA_IN_OFFSET);
-	unsigned int shift = CYGNUS_GPIO_SHIFT(gpio);
+	struct iproc_gpio *chip = to_iproc_gpio(gc);
+	unsigned int offset = IPROC_GPIO_REG(gpio,
+					      IPROC_GPIO_DATA_IN_OFFSET);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
 
 	return !!(readl(chip->base + offset) & BIT(shift));
 }
 
-static int cygnus_get_groups_count(struct pinctrl_dev *pctldev)
+static int iproc_get_groups_count(struct pinctrl_dev *pctldev)
 {
 	return 1;
 }
@@ -372,20 +374,20 @@ static int cygnus_get_groups_count(struct pinctrl_dev *pctldev)
  * Only one group: "gpio_grp", since this local pinctrl device only performs
  * GPIO specific PINCONF configurations
  */
-static const char *cygnus_get_group_name(struct pinctrl_dev *pctldev,
+static const char *iproc_get_group_name(struct pinctrl_dev *pctldev,
 					 unsigned selector)
 {
 	return "gpio_grp";
 }
 
-static const struct pinctrl_ops cygnus_pctrl_ops = {
-	.get_groups_count = cygnus_get_groups_count,
-	.get_group_name = cygnus_get_group_name,
+static const struct pinctrl_ops iproc_pctrl_ops = {
+	.get_groups_count = iproc_get_groups_count,
+	.get_group_name = iproc_get_group_name,
 	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
 	.dt_free_map = pinctrl_utils_dt_free_map,
 };
 
-static int cygnus_gpio_set_pull(struct cygnus_gpio *chip, unsigned gpio,
+static int iproc_gpio_set_pull(struct iproc_gpio *chip, unsigned gpio,
 				bool disable, bool pull_up)
 {
 	unsigned long flags;
@@ -393,11 +395,11 @@ static int cygnus_gpio_set_pull(struct cygnus_gpio *chip, unsigned gpio,
 	spin_lock_irqsave(&chip->lock, flags);
 
 	if (disable) {
-		cygnus_set_bit(chip, CYGNUS_GPIO_RES_EN_OFFSET, gpio, false);
+		iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio, false);
 	} else {
-		cygnus_set_bit(chip, CYGNUS_GPIO_PAD_RES_OFFSET, gpio,
+		iproc_set_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio,
 			       pull_up);
-		cygnus_set_bit(chip, CYGNUS_GPIO_RES_EN_OFFSET, gpio, true);
+		iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio, true);
 	}
 
 	spin_unlock_irqrestore(&chip->lock, flags);
@@ -407,18 +409,18 @@ static int cygnus_gpio_set_pull(struct cygnus_gpio *chip, unsigned gpio,
 	return 0;
 }
 
-static void cygnus_gpio_get_pull(struct cygnus_gpio *chip, unsigned gpio,
+static void iproc_gpio_get_pull(struct iproc_gpio *chip, unsigned gpio,
 				 bool *disable, bool *pull_up)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->lock, flags);
-	*disable = !cygnus_get_bit(chip, CYGNUS_GPIO_RES_EN_OFFSET, gpio);
-	*pull_up = cygnus_get_bit(chip, CYGNUS_GPIO_PAD_RES_OFFSET, gpio);
+	*disable = !iproc_get_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio);
+	*pull_up = iproc_get_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio);
 	spin_unlock_irqrestore(&chip->lock, flags);
 }
 
-static int cygnus_gpio_set_strength(struct cygnus_gpio *chip, unsigned gpio,
+static int iproc_gpio_set_strength(struct iproc_gpio *chip, unsigned gpio,
 				    unsigned strength)
 {
 	void __iomem *base;
@@ -432,14 +434,14 @@ static int cygnus_gpio_set_strength(struct cygnus_gpio *chip, unsigned gpio,
 
 	if (chip->io_ctrl) {
 		base = chip->io_ctrl;
-		offset = CYGNUS_GPIO_DRV0_CTRL_OFFSET;
+		offset = IPROC_GPIO_DRV0_CTRL_OFFSET;
 	} else {
 		base = chip->base;
-		offset = CYGNUS_GPIO_REG(gpio,
-					 CYGNUS_GPIO_ASIU_DRV0_CTRL_OFFSET);
+		offset = IPROC_GPIO_REG(gpio,
+					 IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET);
 	}
 
-	shift = CYGNUS_GPIO_SHIFT(gpio);
+	shift = IPROC_GPIO_SHIFT(gpio);
 
 	dev_dbg(chip->dev, "gpio:%u set drive strength:%d mA\n", gpio,
 		strength);
@@ -458,7 +460,7 @@ static int cygnus_gpio_set_strength(struct cygnus_gpio *chip, unsigned gpio,
 	return 0;
 }
 
-static int cygnus_gpio_get_strength(struct cygnus_gpio *chip, unsigned gpio,
+static int iproc_gpio_get_strength(struct iproc_gpio *chip, unsigned gpio,
 				    u16 *strength)
 {
 	void __iomem *base;
@@ -468,14 +470,14 @@ static int cygnus_gpio_get_strength(struct cygnus_gpio *chip, unsigned gpio,
 
 	if (chip->io_ctrl) {
 		base = chip->io_ctrl;
-		offset = CYGNUS_GPIO_DRV0_CTRL_OFFSET;
+		offset = IPROC_GPIO_DRV0_CTRL_OFFSET;
 	} else {
 		base = chip->base;
-		offset = CYGNUS_GPIO_REG(gpio,
-					 CYGNUS_GPIO_ASIU_DRV0_CTRL_OFFSET);
+		offset = IPROC_GPIO_REG(gpio,
+					 IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET);
 	}
 
-	shift = CYGNUS_GPIO_SHIFT(gpio);
+	shift = IPROC_GPIO_SHIFT(gpio);
 
 	spin_lock_irqsave(&chip->lock, flags);
 	*strength = 0;
@@ -493,44 +495,43 @@ static int cygnus_gpio_get_strength(struct cygnus_gpio *chip, unsigned gpio,
 	return 0;
 }
 
-static int cygnus_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
+static int iproc_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
 				 unsigned long *config)
 {
-	struct cygnus_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
+	struct iproc_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
 	enum pin_config_param param = pinconf_to_config_param(*config);
-	unsigned gpio = cygnus_pin_to_gpio(pin);
+	unsigned gpio = iproc_pin_to_gpio(pin);
 	u16 arg;
 	bool disable, pull_up;
 	int ret;
 
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:
-		cygnus_gpio_get_pull(chip, gpio, &disable, &pull_up);
+		iproc_gpio_get_pull(chip, gpio, &disable, &pull_up);
 		if (disable)
 			return 0;
 		else
 			return -EINVAL;
 
 	case PIN_CONFIG_BIAS_PULL_UP:
-		cygnus_gpio_get_pull(chip, gpio, &disable, &pull_up);
+		iproc_gpio_get_pull(chip, gpio, &disable, &pull_up);
 		if (!disable && pull_up)
 			return 0;
 		else
 			return -EINVAL;
 
 	case PIN_CONFIG_BIAS_PULL_DOWN:
-		cygnus_gpio_get_pull(chip, gpio, &disable, &pull_up);
+		iproc_gpio_get_pull(chip, gpio, &disable, &pull_up);
 		if (!disable && !pull_up)
 			return 0;
 		else
 			return -EINVAL;
 
 	case PIN_CONFIG_DRIVE_STRENGTH:
-		ret = cygnus_gpio_get_strength(chip, gpio, &arg);
+		ret = iproc_gpio_get_strength(chip, gpio, &arg);
 		if (ret)
 			return ret;
-		else
-			*config = pinconf_to_config_packed(param, arg);
+		*config = pinconf_to_config_packed(param, arg);
 
 		return 0;
 
@@ -541,13 +542,13 @@ static int cygnus_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
 	return -ENOTSUPP;
 }
 
-static int cygnus_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
+static int iproc_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
 				 unsigned long *configs, unsigned num_configs)
 {
-	struct cygnus_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
+	struct iproc_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
 	enum pin_config_param param;
 	u16 arg;
-	unsigned i, gpio = cygnus_pin_to_gpio(pin);
+	unsigned i, gpio = iproc_pin_to_gpio(pin);
 	int ret = -ENOTSUPP;
 
 	for (i = 0; i < num_configs; i++) {
@@ -556,25 +557,25 @@ static int cygnus_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
 
 		switch (param) {
 		case PIN_CONFIG_BIAS_DISABLE:
-			ret = cygnus_gpio_set_pull(chip, gpio, true, false);
+			ret = iproc_gpio_set_pull(chip, gpio, true, false);
 			if (ret < 0)
 				goto out;
 			break;
 
 		case PIN_CONFIG_BIAS_PULL_UP:
-			ret = cygnus_gpio_set_pull(chip, gpio, false, true);
+			ret = iproc_gpio_set_pull(chip, gpio, false, true);
 			if (ret < 0)
 				goto out;
 			break;
 
 		case PIN_CONFIG_BIAS_PULL_DOWN:
-			ret = cygnus_gpio_set_pull(chip, gpio, false, false);
+			ret = iproc_gpio_set_pull(chip, gpio, false, false);
 			if (ret < 0)
 				goto out;
 			break;
 
 		case PIN_CONFIG_DRIVE_STRENGTH:
-			ret = cygnus_gpio_set_strength(chip, gpio, arg);
+			ret = iproc_gpio_set_strength(chip, gpio, arg);
 			if (ret < 0)
 				goto out;
 			break;
@@ -589,20 +590,20 @@ out:
 	return ret;
 }
 
-static const struct pinconf_ops cygnus_pconf_ops = {
+static const struct pinconf_ops iproc_pconf_ops = {
 	.is_generic = true,
-	.pin_config_get = cygnus_pin_config_get,
-	.pin_config_set = cygnus_pin_config_set,
+	.pin_config_get = iproc_pin_config_get,
+	.pin_config_set = iproc_pin_config_set,
 };
 
 /*
- * Cygnus GPIO controller supports some PINCONF related configurations such as
+ * Iproc GPIO controller supports some PINCONF related configurations such as
  * pull up, pull down, and drive strength, when the pin is configured to GPIO
  *
  * Here a local pinctrl device is created with simple 1-to-1 pin mapping to the
  * local GPIO pins
  */
-static int cygnus_gpio_register_pinconf(struct cygnus_gpio *chip)
+static int iproc_gpio_register_pinconf(struct iproc_gpio *chip)
 {
 	struct pinctrl_desc *pctldesc = &chip->pctldesc;
 	struct pinctrl_pin_desc *pins;
@@ -622,10 +623,10 @@ static int cygnus_gpio_register_pinconf(struct cygnus_gpio *chip)
 	}
 
 	pctldesc->name = dev_name(chip->dev);
-	pctldesc->pctlops = &cygnus_pctrl_ops;
+	pctldesc->pctlops = &iproc_pctrl_ops;
 	pctldesc->pins = pins;
 	pctldesc->npins = gc->ngpio;
-	pctldesc->confops = &cygnus_pconf_ops;
+	pctldesc->confops = &iproc_pconf_ops;
 
 	chip->pctl = pinctrl_register(pctldesc, chip->dev, chip);
 	if (IS_ERR(chip->pctl)) {
@@ -636,59 +637,27 @@ static int cygnus_gpio_register_pinconf(struct cygnus_gpio *chip)
 	return 0;
 }
 
-static void cygnus_gpio_unregister_pinconf(struct cygnus_gpio *chip)
+static void iproc_gpio_unregister_pinconf(struct iproc_gpio *chip)
 {
-	if (chip->pctl)
-		pinctrl_unregister(chip->pctl);
+	pinctrl_unregister(chip->pctl);
 }
 
-struct cygnus_gpio_data {
-	unsigned num_gpios;
-};
-
-static const struct cygnus_gpio_data cygnus_cmm_gpio_data = {
-	.num_gpios = 24,
-};
-
-static const struct cygnus_gpio_data cygnus_asiu_gpio_data = {
-	.num_gpios = 146,
+static const struct of_device_id iproc_gpio_of_match[] = {
+	{ .compatible = "brcm,cygnus-ccm-gpio" },
+	{ .compatible = "brcm,cygnus-asiu-gpio" },
+	{ .compatible = "brcm,cygnus-crmu-gpio" },
+	{ .compatible = "brcm,iproc-gpio" },
+	{ }
 };
 
-static const struct cygnus_gpio_data cygnus_crmu_gpio_data = {
-	.num_gpios = 6,
-};
-
-static const struct of_device_id cygnus_gpio_of_match[] = {
-	{
-		.compatible = "brcm,cygnus-ccm-gpio",
-		.data = &cygnus_cmm_gpio_data,
-	},
-	{
-		.compatible = "brcm,cygnus-asiu-gpio",
-		.data = &cygnus_asiu_gpio_data,
-	},
-	{
-		.compatible = "brcm,cygnus-crmu-gpio",
-		.data = &cygnus_crmu_gpio_data,
-	}
-};
-
-static int cygnus_gpio_probe(struct platform_device *pdev)
+static int iproc_gpio_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct resource *res;
-	struct cygnus_gpio *chip;
+	struct iproc_gpio *chip;
 	struct gpio_chip *gc;
 	u32 ngpios;
 	int irq, ret;
-	const struct of_device_id *match;
-	const struct cygnus_gpio_data *gpio_data;
-
-	match = of_match_device(cygnus_gpio_of_match, dev);
-	if (!match)
-		return -ENODEV;
-	gpio_data = match->data;
-	ngpios = gpio_data->num_gpios;
 
 	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
 	if (!chip)
@@ -713,6 +682,11 @@ static int cygnus_gpio_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (of_property_read_u32(dev->of_node, "ngpios", &ngpios)) {
+		dev_err(&pdev->dev, "missing ngpios DT property\n");
+		return -ENODEV;
+	}
+
 	spin_lock_init(&chip->lock);
 
 	gc = &chip->gc;
@@ -722,12 +696,12 @@ static int cygnus_gpio_probe(struct platform_device *pdev)
 	gc->label = dev_name(dev);
 	gc->dev = dev;
 	gc->of_node = dev->of_node;
-	gc->request = cygnus_gpio_request;
-	gc->free = cygnus_gpio_free;
-	gc->direction_input = cygnus_gpio_direction_input;
-	gc->direction_output = cygnus_gpio_direction_output;
-	gc->set = cygnus_gpio_set;
-	gc->get = cygnus_gpio_get;
+	gc->request = iproc_gpio_request;
+	gc->free = iproc_gpio_free;
+	gc->direction_input = iproc_gpio_direction_input;
+	gc->direction_output = iproc_gpio_direction_output;
+	gc->set = iproc_gpio_set;
+	gc->get = iproc_gpio_get;
 
 	chip->pinmux_is_supported = of_property_read_bool(dev->of_node,
 							"gpio-ranges");
@@ -738,7 +712,7 @@ static int cygnus_gpio_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = cygnus_gpio_register_pinconf(chip);
+	ret = iproc_gpio_register_pinconf(chip);
 	if (ret) {
 		dev_err(dev, "unable to register pinconf\n");
 		goto err_rm_gpiochip;
@@ -747,21 +721,21 @@ static int cygnus_gpio_probe(struct platform_device *pdev)
 	/* optional GPIO interrupt support */
 	irq = platform_get_irq(pdev, 0);
 	if (irq) {
-		ret = gpiochip_irqchip_add(gc, &cygnus_gpio_irq_chip, 0,
+		ret = gpiochip_irqchip_add(gc, &iproc_gpio_irq_chip, 0,
 					   handle_simple_irq, IRQ_TYPE_NONE);
 		if (ret) {
 			dev_err(dev, "no GPIO irqchip\n");
 			goto err_unregister_pinconf;
 		}
 
-		gpiochip_set_chained_irqchip(gc, &cygnus_gpio_irq_chip, irq,
-					     cygnus_gpio_irq_handler);
+		gpiochip_set_chained_irqchip(gc, &iproc_gpio_irq_chip, irq,
+					     iproc_gpio_irq_handler);
 	}
 
 	return 0;
 
 err_unregister_pinconf:
-	cygnus_gpio_unregister_pinconf(chip);
+	iproc_gpio_unregister_pinconf(chip);
 
 err_rm_gpiochip:
 	gpiochip_remove(gc);
@@ -769,16 +743,16 @@ err_rm_gpiochip:
 	return ret;
 }
 
-static struct platform_driver cygnus_gpio_driver = {
+static struct platform_driver iproc_gpio_driver = {
 	.driver = {
-		.name = "cygnus-gpio",
-		.of_match_table = cygnus_gpio_of_match,
+		.name = "iproc-gpio",
+		.of_match_table = iproc_gpio_of_match,
 	},
-	.probe = cygnus_gpio_probe,
+	.probe = iproc_gpio_probe,
 };
 
-static int __init cygnus_gpio_init(void)
+static int __init iproc_gpio_init(void)
 {
-	return platform_driver_probe(&cygnus_gpio_driver, cygnus_gpio_probe);
+	return platform_driver_probe(&iproc_gpio_driver, iproc_gpio_probe);
 }
-arch_initcall_sync(cygnus_gpio_init);
+arch_initcall_sync(iproc_gpio_init);
diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
new file mode 100644
index 0000000..725c36f
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
@@ -0,0 +1,749 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file contains the Broadcom Northstar Plus (NSP) GPIO driver that
+ * supports the chipCommonA GPIO controller. Basic PINCONF such as bias,
+ * pull up/down, slew and drive strength are also supported in this driver.
+ *
+ * Pins from the chipCommonA  GPIO can be individually muxed to GPIO function,
+ * through the interaction with the NSP IOMUX controller.
+ */
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/slab.h>
+
+#include "../pinctrl-utils.h"
+
+#define NSP_CHIP_A_INT_STATUS		0x00
+#define NSP_CHIP_A_INT_MASK		0x04
+#define NSP_GPIO_DATA_IN		0x40
+#define NSP_GPIO_DATA_OUT		0x44
+#define NSP_GPIO_OUT_EN			0x48
+#define NSP_GPIO_INT_POLARITY		0x50
+#define NSP_GPIO_INT_MASK		0x54
+#define NSP_GPIO_EVENT			0x58
+#define NSP_GPIO_EVENT_INT_MASK		0x5c
+#define NSP_GPIO_EVENT_INT_POLARITY	0x64
+#define NSP_CHIP_A_GPIO_INT_BIT		0x01
+
+/* I/O parameters offset for chipcommon A GPIO */
+#define NSP_GPIO_DRV_CTRL		0x00
+#define NSP_GPIO_HYSTERESIS_EN		0x10
+#define NSP_GPIO_SLEW_RATE_EN		0x14
+#define NSP_PULL_UP_EN			0x18
+#define NSP_PULL_DOWN_EN		0x1c
+#define GPIO_DRV_STRENGTH_BITS		0x03
+
+/*
+ * nsp GPIO core
+ *
+ * @dev: pointer to device
+ * @base: I/O register base for nsp GPIO controller
+ * @io_ctrl: I/O register base for PINCONF support outside the GPIO block
+ * @gc: GPIO chip
+ * @pctl: pointer to pinctrl_dev
+ * @pctldesc: pinctrl descriptor
+ * @irq_domain: pointer to irq domain
+ * @lock: lock to protect access to I/O registers
+ */
+struct nsp_gpio {
+	struct device *dev;
+	void __iomem *base;
+	void __iomem *io_ctrl;
+	struct gpio_chip gc;
+	struct pinctrl_dev *pctl;
+	struct pinctrl_desc pctldesc;
+	struct irq_domain *irq_domain;
+	spinlock_t lock;
+};
+
+enum base_type {
+	REG,
+	IO_CTRL
+};
+
+static inline struct nsp_gpio *to_nsp_gpio(struct gpio_chip *gc)
+{
+	return container_of(gc, struct nsp_gpio, gc);
+}
+
+/*
+ * Mapping from PINCONF pins to GPIO pins is 1-to-1
+ */
+static inline unsigned nsp_pin_to_gpio(unsigned pin)
+{
+	return pin;
+}
+
+/*
+ *  nsp_set_bit - set or clear one bit (corresponding to the GPIO pin) in a
+ *  nsp GPIO register
+ *
+ *  @nsp_gpio: nsp GPIO device
+ *  @base_type: reg base to modify
+ *  @reg: register offset
+ *  @gpio: GPIO pin
+ *  @set: set or clear
+ */
+static inline void nsp_set_bit(struct nsp_gpio *chip, enum base_type address,
+			       unsigned int reg, unsigned gpio, bool set)
+{
+	u32 val;
+	void __iomem *base_address;
+
+	if (address == IO_CTRL)
+		base_address = chip->io_ctrl;
+	else
+		base_address = chip->base;
+
+	val = readl(base_address + reg);
+	if (set)
+		val |= BIT(gpio);
+	else
+		val &= ~BIT(gpio);
+
+	writel(val, base_address + reg);
+}
+
+/*
+ *  nsp_get_bit - get one bit (corresponding to the GPIO pin) in a
+ *  nsp GPIO register
+ */
+static inline bool nsp_get_bit(struct nsp_gpio *chip, enum base_type address,
+			       unsigned int reg, unsigned gpio)
+{
+	if (address == IO_CTRL)
+		return !!(readl(chip->io_ctrl + reg) & BIT(gpio));
+	else
+		return !!(readl(chip->base + reg) & BIT(gpio));
+}
+
+static irqreturn_t nsp_gpio_irq_handler(int irq, void *data)
+{
+	struct nsp_gpio *chip = (struct nsp_gpio *)data;
+	struct gpio_chip gc = chip->gc;
+	int bit;
+	unsigned long int_bits = 0;
+	u32 int_status;
+
+	/* go through the entire GPIOs and handle all interrupts */
+	int_status = readl(chip->base + NSP_CHIP_A_INT_STATUS);
+	if (int_status & NSP_CHIP_A_GPIO_INT_BIT) {
+		unsigned int event, level;
+
+		/* Get level and edge interrupts */
+		event = readl(chip->base + NSP_GPIO_EVENT_INT_MASK) &
+			      readl(chip->base + NSP_GPIO_EVENT);
+		level = readl(chip->base + NSP_GPIO_DATA_IN) ^
+			      readl(chip->base + NSP_GPIO_INT_POLARITY);
+		level &= readl(chip->base + NSP_GPIO_INT_MASK);
+		int_bits = level | event;
+
+		for_each_set_bit(bit, &int_bits, gc.ngpio) {
+			/*
+			 * Clear the interrupt before invoking the
+			 * handler, so we do not leave any window
+			 */
+			writel(BIT(bit), chip->base + NSP_GPIO_EVENT);
+			generic_handle_irq(
+				irq_linear_revmap(chip->irq_domain, bit));
+		}
+	}
+
+	return  int_bits ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void nsp_gpio_irq_ack(struct irq_data *d)
+{
+	struct nsp_gpio *chip = irq_data_get_irq_chip_data(d);
+	unsigned gpio = d->hwirq;
+	u32 val = BIT(gpio);
+	u32 trigger_type;
+
+	trigger_type = irq_get_trigger_type(d->irq);
+	if (trigger_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		nsp_set_bit(chip, REG, NSP_GPIO_EVENT, gpio, val);
+}
+
+/*
+ *  nsp_gpio_irq_set_mask - mask/unmask a GPIO interrupt
+ *
+ *  @d: IRQ chip data
+ *  @unmask: mask/unmask GPIO interrupt
+ */
+static void nsp_gpio_irq_set_mask(struct irq_data *d, bool unmask)
+{
+	struct nsp_gpio *chip = irq_data_get_irq_chip_data(d);
+	unsigned gpio = d->hwirq;
+	u32 trigger_type;
+
+	trigger_type = irq_get_trigger_type(d->irq);
+	if (trigger_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		nsp_set_bit(chip, REG, NSP_GPIO_EVENT_INT_MASK, gpio, unmask);
+	else
+		nsp_set_bit(chip, REG, NSP_GPIO_INT_MASK, gpio, unmask);
+}
+
+static void nsp_gpio_irq_mask(struct irq_data *d)
+{
+	struct nsp_gpio *chip = irq_data_get_irq_chip_data(d);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	nsp_gpio_irq_set_mask(d, false);
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static void nsp_gpio_irq_unmask(struct irq_data *d)
+{
+	struct nsp_gpio *chip = irq_data_get_irq_chip_data(d);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	nsp_gpio_irq_set_mask(d, true);
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int nsp_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct nsp_gpio *chip = irq_data_get_irq_chip_data(d);
+	unsigned gpio = d->hwirq;
+	bool level_low;
+	bool falling;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	falling = nsp_get_bit(chip, REG, NSP_GPIO_EVENT_INT_POLARITY, gpio);
+	level_low = nsp_get_bit(chip, REG, NSP_GPIO_INT_POLARITY, gpio);
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+		falling = false;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		falling = true;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		level_low = false;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		level_low = true;
+		break;
+
+	default:
+		dev_err(chip->dev, "invalid GPIO IRQ type 0x%x\n",
+			type);
+		spin_unlock_irqrestore(&chip->lock, flags);
+		return -EINVAL;
+	}
+
+	nsp_set_bit(chip, REG, NSP_GPIO_EVENT_INT_POLARITY, gpio, falling);
+	nsp_set_bit(chip, REG, NSP_GPIO_INT_POLARITY, gpio, level_low);
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u level_low:%s falling:%s\n", gpio,
+		level_low ? "true" : "false", falling ? "true" : "false");
+	return 0;
+}
+
+static struct irq_chip nsp_gpio_irq_chip = {
+	.name = "gpio-a",
+	.irq_enable = nsp_gpio_irq_unmask,
+	.irq_disable = nsp_gpio_irq_mask,
+	.irq_ack = nsp_gpio_irq_ack,
+	.irq_mask = nsp_gpio_irq_mask,
+	.irq_unmask = nsp_gpio_irq_unmask,
+	.irq_set_type = nsp_gpio_irq_set_type,
+};
+
+/*
+ * Request the nsp IOMUX pinmux controller to mux individual pins to GPIO
+ */
+static int nsp_gpio_request(struct gpio_chip *gc, unsigned offset)
+{
+	unsigned gpio = gc->base + offset;
+
+	return pinctrl_request_gpio(gpio);
+}
+
+static void nsp_gpio_free(struct gpio_chip *gc, unsigned offset)
+{
+	unsigned gpio = gc->base + offset;
+
+	pinctrl_free_gpio(gpio);
+}
+
+static int nsp_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
+{
+	struct nsp_gpio *chip = to_nsp_gpio(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	nsp_set_bit(chip, REG, NSP_GPIO_OUT_EN, gpio, false);
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set input\n", gpio);
+	return 0;
+}
+
+static int nsp_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
+				     int val)
+{
+	struct nsp_gpio *chip = to_nsp_gpio(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	nsp_set_bit(chip, REG, NSP_GPIO_OUT_EN, gpio, true);
+	nsp_set_bit(chip, REG, NSP_GPIO_DATA_OUT, gpio, !!(val));
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set output, value:%d\n", gpio, val);
+	return 0;
+}
+
+static void nsp_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
+{
+	struct nsp_gpio *chip = to_nsp_gpio(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	nsp_set_bit(chip, REG, NSP_GPIO_DATA_OUT, gpio, !!(val));
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set, value:%d\n", gpio, val);
+}
+
+static int nsp_gpio_get(struct gpio_chip *gc, unsigned gpio)
+{
+	struct nsp_gpio *chip = to_nsp_gpio(gc);
+
+	return !!(readl(chip->base + NSP_GPIO_DATA_IN) & BIT(gpio));
+}
+
+static int nsp_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct nsp_gpio *chip = to_nsp_gpio(gc);
+
+	return irq_linear_revmap(chip->irq_domain, offset);
+}
+
+static int nsp_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return 1;
+}
+
+/*
+ * Only one group: "gpio_grp", since this local pinctrl device only performs
+ * GPIO specific PINCONF configurations
+ */
+static const char *nsp_get_group_name(struct pinctrl_dev *pctldev,
+				      unsigned selector)
+{
+	return "gpio_grp";
+}
+
+static const struct pinctrl_ops nsp_pctrl_ops = {
+	.get_groups_count = nsp_get_groups_count,
+	.get_group_name = nsp_get_group_name,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+static int nsp_gpio_set_slew(struct nsp_gpio *chip, unsigned gpio, u16 slew)
+{
+	if (slew)
+		nsp_set_bit(chip, IO_CTRL, NSP_GPIO_SLEW_RATE_EN, gpio, true);
+	else
+		nsp_set_bit(chip, IO_CTRL, NSP_GPIO_SLEW_RATE_EN, gpio, false);
+
+	return 0;
+}
+
+static int nsp_gpio_set_pull(struct nsp_gpio *chip, unsigned gpio,
+			     bool pull_up, bool pull_down)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	nsp_set_bit(chip, IO_CTRL, NSP_PULL_DOWN_EN, gpio, pull_down);
+	nsp_set_bit(chip, IO_CTRL, NSP_PULL_UP_EN, gpio, pull_up);
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set pullup:%d pulldown: %d\n",
+		gpio, pull_up, pull_down);
+	return 0;
+}
+
+static void nsp_gpio_get_pull(struct nsp_gpio *chip, unsigned gpio,
+			      bool *pull_up, bool *pull_down)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	*pull_up = nsp_get_bit(chip, IO_CTRL, NSP_PULL_UP_EN, gpio);
+	*pull_down = nsp_get_bit(chip, IO_CTRL, NSP_PULL_DOWN_EN, gpio);
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int nsp_gpio_set_strength(struct nsp_gpio *chip, unsigned gpio,
+				 u16 strength)
+{
+	u32 offset, shift, i;
+	u32 val;
+	unsigned long flags;
+
+	/* make sure drive strength is supported */
+	if (strength < 2 || strength > 16 || (strength % 2))
+		return -ENOTSUPP;
+
+	shift = gpio;
+	offset = NSP_GPIO_DRV_CTRL;
+	dev_dbg(chip->dev, "gpio:%u set drive strength:%d mA\n", gpio,
+		strength);
+	spin_lock_irqsave(&chip->lock, flags);
+	strength = (strength / 2) - 1;
+	for (i = GPIO_DRV_STRENGTH_BITS; i > 0; i--) {
+		val = readl(chip->io_ctrl + offset);
+		val &= ~BIT(shift);
+		val |= ((strength >> (i-1)) & 0x1) << shift;
+		writel(val, chip->io_ctrl + offset);
+		offset += 4;
+	}
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int nsp_gpio_get_strength(struct nsp_gpio *chip, unsigned gpio,
+				 u16 *strength)
+{
+	unsigned int offset, shift;
+	u32 val;
+	unsigned long flags;
+	int i;
+
+	offset = NSP_GPIO_DRV_CTRL;
+	shift = gpio;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	*strength = 0;
+	for (i = (GPIO_DRV_STRENGTH_BITS - 1); i >= 0; i--) {
+		val = readl(chip->io_ctrl + offset) & BIT(shift);
+		val >>= shift;
+		*strength += (val << i);
+		offset += 4;
+	}
+
+	/* convert to mA */
+	*strength = (*strength + 1) * 2;
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+int nsp_pin_config_group_get(struct pinctrl_dev *pctldev, unsigned selector,
+			     unsigned long *config)
+{
+	return 0;
+}
+
+int nsp_pin_config_group_set(struct pinctrl_dev *pctldev, unsigned selector,
+			     unsigned long *configs, unsigned num_configs)
+{
+	return 0;
+}
+
+static int nsp_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
+			      unsigned long *config)
+{
+	struct nsp_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	unsigned int gpio;
+	u16 arg = 0;
+	bool pull_up, pull_down;
+	int ret;
+
+	gpio = nsp_pin_to_gpio(pin);
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down);
+		if ((pull_up == false) && (pull_down == false))
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_BIAS_PULL_UP:
+		nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down);
+		if (pull_up)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down);
+		if (pull_down)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		ret = nsp_gpio_get_strength(chip, gpio, &arg);
+		if (ret)
+			return ret;
+		*config = pinconf_to_config_packed(param, arg);
+		return 0;
+
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int nsp_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
+			      unsigned long *configs, unsigned num_configs)
+{
+	struct nsp_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param;
+	u16 arg;
+	unsigned int i, gpio;
+	int ret = -ENOTSUPP;
+
+	gpio = nsp_pin_to_gpio(pin);
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_DISABLE:
+			ret = nsp_gpio_set_pull(chip, gpio, false, false);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_UP:
+			ret = nsp_gpio_set_pull(chip, gpio, true, false);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			ret = nsp_gpio_set_pull(chip, gpio, false, true);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			ret = nsp_gpio_set_strength(chip, gpio, arg);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_SLEW_RATE:
+			ret = nsp_gpio_set_slew(chip, gpio, arg);
+			if (ret < 0)
+				goto out;
+			break;
+
+		default:
+			dev_err(chip->dev, "invalid configuration\n");
+			return -ENOTSUPP;
+		}
+	}
+
+out:
+	return ret;
+}
+
+static const struct pinconf_ops nsp_pconf_ops = {
+	.is_generic = true,
+	.pin_config_get = nsp_pin_config_get,
+	.pin_config_set = nsp_pin_config_set,
+	.pin_config_group_get = nsp_pin_config_group_get,
+	.pin_config_group_set = nsp_pin_config_group_set,
+};
+
+/*
+ * NSP GPIO controller supports some PINCONF related configurations such as
+ * pull up, pull down, slew and drive strength, when the pin is configured
+ * to GPIO.
+ *
+ * Here a local pinctrl device is created with simple 1-to-1 pin mapping to the
+ * local GPIO pins
+ */
+static int nsp_gpio_register_pinconf(struct nsp_gpio *chip)
+{
+	struct pinctrl_desc *pctldesc = &chip->pctldesc;
+	struct pinctrl_pin_desc *pins;
+	struct gpio_chip *gc = &chip->gc;
+	int i;
+
+	pins = devm_kcalloc(chip->dev, gc->ngpio, sizeof(*pins), GFP_KERNEL);
+	if (!pins)
+		return -ENOMEM;
+	for (i = 0; i < gc->ngpio; i++) {
+		pins[i].number = i;
+		pins[i].name = devm_kasprintf(chip->dev, GFP_KERNEL,
+					      "gpio-%d", i);
+		if (!pins[i].name)
+			return -ENOMEM;
+	}
+	pctldesc->name = dev_name(chip->dev);
+	pctldesc->pctlops = &nsp_pctrl_ops;
+	pctldesc->pins = pins;
+	pctldesc->npins = gc->ngpio;
+	pctldesc->confops = &nsp_pconf_ops;
+
+	chip->pctl = pinctrl_register(pctldesc, chip->dev, chip);
+	if (IS_ERR(chip->pctl)) {
+		dev_err(chip->dev, "unable to register pinctrl device\n");
+		return PTR_ERR(chip->pctl);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id nsp_gpio_of_match[] = {
+	{.compatible = "brcm,nsp-gpio-a",},
+	{}
+};
+
+static int nsp_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nsp_gpio *chip;
+	struct gpio_chip *gc;
+	u32 val, count;
+	int irq, ret;
+
+	if (of_property_read_u32(pdev->dev.of_node, "ngpios", &val)) {
+		dev_err(&pdev->dev, "Missing ngpios OF property\n");
+		return -ENODEV;
+	}
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = dev;
+	platform_set_drvdata(pdev, chip);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	chip->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(chip->base)) {
+		dev_err(dev, "unable to map I/O memory\n");
+		return PTR_ERR(chip->base);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	chip->io_ctrl = devm_ioremap_resource(dev, res);
+	if (IS_ERR(chip->io_ctrl)) {
+		dev_err(dev, "unable to map I/O memory\n");
+		return PTR_ERR(chip->io_ctrl);
+	}
+
+	spin_lock_init(&chip->lock);
+	gc = &chip->gc;
+	gc->base = -1;
+	gc->can_sleep = false;
+	gc->ngpio = val;
+	gc->label = dev_name(dev);
+	gc->dev = dev;
+	gc->of_node = dev->of_node;
+	gc->request = nsp_gpio_request;
+	gc->free = nsp_gpio_free;
+	gc->direction_input = nsp_gpio_direction_input;
+	gc->direction_output = nsp_gpio_direction_output;
+	gc->set = nsp_gpio_set;
+	gc->get = nsp_gpio_get;
+	gc->to_irq = nsp_gpio_to_irq;
+
+	/* optional GPIO interrupt support */
+	irq = platform_get_irq(pdev, 0);
+	if (irq > 0) {
+		/* Create irq domain so that each pin can be assigned an IRQ.*/
+		chip->irq_domain = irq_domain_add_linear(gc->of_node, gc->ngpio,
+							 &irq_domain_simple_ops,
+							 chip);
+		if (!chip->irq_domain) {
+			dev_err(&pdev->dev, "Couldn't allocate IRQ domain\n");
+			return -ENXIO;
+		}
+
+		/* Map each gpio to an IRQ and set the handler for gpiolib. */
+		for (count = 0; count < gc->ngpio; count++) {
+			int irq = irq_create_mapping(chip->irq_domain, count);
+
+			irq_set_chip_and_handler(irq, &nsp_gpio_irq_chip,
+						 handle_simple_irq);
+			irq_set_chip_data(irq, chip);
+		}
+
+		/* Install ISR for this GPIO controller. */
+		ret = devm_request_irq(&pdev->dev, irq, nsp_gpio_irq_handler,
+				       IRQF_SHARED, "gpio-a", chip);
+		if (ret) {
+			dev_err(&pdev->dev, "Unable to request IRQ%d: %d\n",
+				irq, ret);
+			goto err_rm_gpiochip;
+		}
+
+		val = readl(chip->base + NSP_CHIP_A_INT_MASK);
+		val = val | NSP_CHIP_A_GPIO_INT_BIT;
+		writel(val, (chip->base + NSP_CHIP_A_INT_MASK));
+	}
+
+	ret = gpiochip_add(gc);
+	if (ret < 0) {
+		dev_err(dev, "unable to add GPIO chip\n");
+		return ret;
+	}
+
+	ret = nsp_gpio_register_pinconf(chip);
+	if (ret) {
+		dev_err(dev, "unable to register pinconf\n");
+		goto err_rm_gpiochip;
+	}
+
+	return 0;
+
+err_rm_gpiochip:
+	gpiochip_remove(gc);
+
+	return ret;
+}
+
+static struct platform_driver nsp_gpio_driver = {
+	.driver = {
+		.name = "nsp-gpio-a",
+		.of_match_table = nsp_gpio_of_match,
+	},
+	.probe = nsp_gpio_probe,
+};
+
+static int __init nsp_gpio_init(void)
+{
+	return platform_driver_probe(&nsp_gpio_driver, nsp_gpio_probe);
+}
+arch_initcall_sync(nsp_gpio_init);