pinctrl: Pass all configs to driver on pin_config_set()

When setting pin configuration in the pinctrl framework, pin_config_set() or
pin_config_group_set() is called in a loop to set one configuration at a time
for the specified pin or group.

This patch 1) removes the loop and 2) changes the API to pass the whole pin
config array to the driver.  It is now up to the driver to loop through the
configs.  This allows the driver to potentially combine configs and reduce the
number of writes to pin config registers.

All c files changed have been build-tested to verify the change compiles and
that the corresponding .o is successfully generated.

Signed-off-by: Sherman Yin <syin@broadcom.com>
Reviewed-by: Christian Daudt <csd@broadcom.com>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 38 insertions, 31 deletions

diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c
index be7e900..a2e93a2 100644
--- a/drivers/pinctrl/pinctrl-tegra.c
+++ b/drivers/pinctrl/pinctrl-tegra.c
@@ -436,7 +436,8 @@ static int tegra_pinconf_get(struct pinctrl_dev *pctldev,
 }
 
 static int tegra_pinconf_set(struct pinctrl_dev *pctldev,
-			     unsigned pin, unsigned long config)
+			     unsigned pin, unsigned long *configs,
+			     unsigned num_configs)
 {
 	dev_err(pctldev->dev, "pin_config_set op not supported\n");
 	return -ENOTSUPP;
@@ -471,51 +472,57 @@ static int tegra_pinconf_group_get(struct pinctrl_dev *pctldev,
 }
 
 static int tegra_pinconf_group_set(struct pinctrl_dev *pctldev,
-				   unsigned group, unsigned long config)
+				   unsigned group, unsigned long *configs,
+				   unsigned num_configs)
 {
 	struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
-	enum tegra_pinconf_param param = TEGRA_PINCONF_UNPACK_PARAM(config);
-	u16 arg = TEGRA_PINCONF_UNPACK_ARG(config);
+	enum tegra_pinconf_param param;
+	u16 arg;
 	const struct tegra_pingroup *g;
-	int ret;
+	int ret, i;
 	s8 bank, bit, width;
 	s16 reg;
 	u32 val, mask;
 
 	g = &pmx->soc->groups[group];
 
-	ret = tegra_pinconf_reg(pmx, g, param, true, &bank, &reg, &bit,
-				&width);
-	if (ret < 0)
-		return ret;
+	for (i = 0; i < num_configs; i++) {
+		param = TEGRA_PINCONF_UNPACK_PARAM(configs[i]);
+		arg = TEGRA_PINCONF_UNPACK_ARG(configs[i]);
 
-	val = pmx_readl(pmx, bank, reg);
+		ret = tegra_pinconf_reg(pmx, g, param, true, &bank, &reg, &bit,
+					&width);
+		if (ret < 0)
+			return ret;
 
-	/* LOCK can't be cleared */
-	if (param == TEGRA_PINCONF_PARAM_LOCK) {
-		if ((val & BIT(bit)) && !arg) {
-			dev_err(pctldev->dev, "LOCK bit cannot be cleared\n");
-			return -EINVAL;
+		val = pmx_readl(pmx, bank, reg);
+
+		/* LOCK can't be cleared */
+		if (param == TEGRA_PINCONF_PARAM_LOCK) {
+			if ((val & BIT(bit)) && !arg) {
+				dev_err(pctldev->dev, "LOCK bit cannot be cleared\n");
+				return -EINVAL;
+			}
 		}
-	}
 
-	/* Special-case Boolean values; allow any non-zero as true */
-	if (width == 1)
-		arg = !!arg;
+		/* Special-case Boolean values; allow any non-zero as true */
+		if (width == 1)
+			arg = !!arg;
 
-	/* Range-check user-supplied value */
-	mask = (1 << width) - 1;
-	if (arg & ~mask) {
-		dev_err(pctldev->dev,
-			"config %lx: %x too big for %d bit register\n",
-			config, arg, width);
-		return -EINVAL;
-	}
+		/* Range-check user-supplied value */
+		mask = (1 << width) - 1;
+		if (arg & ~mask) {
+			dev_err(pctldev->dev,
+				"config %lx: %x too big for %d bit register\n",
+				configs[i], arg, width);
+			return -EINVAL;
+		}
 
-	/* Update register */
-	val &= ~(mask << bit);
-	val |= arg << bit;
-	pmx_writel(pmx, val, bank, reg);
+		/* Update register */
+		val &= ~(mask << bit);
+		val |= arg << bit;
+		pmx_writel(pmx, val, bank, reg);
+	} /* for each config */
 
 	return 0;
 }