power_supply: Enable battery-charger for 88pm860x

There are charger and battery measurement feature for 88pm860x PMIC.

For charger, it can support pre-charge with small current when battery is
nearly exausted and then changed into fast-charge with CC&CV mode.

For battery monitor, it can support battery measurement such as
vbat,vsys,vchg and ibat etc,it can aslo accumulating the Coulomb value
charged or discharged from battery based on Conlomb Counter, we use it
to estimate battery capacity.

Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>

1 files changed, 1041 insertions, 0 deletions

diff --git a/drivers/power/88pm860x_battery.c b/drivers/power/88pm860x_battery.c
new file mode 100644
index 0000000..5e905f3
--- /dev/null
+++ b/drivers/power/88pm860x_battery.c
@@ -0,0 +1,1041 @@
+/*
+ * Battery driver for Marvell 88PM860x PMIC
+ *
+ * Copyright (c) 2012 Marvell International Ltd.
+ * Author:	Jett Zhou <jtzhou@marvell.com>
+ *		Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/88pm860x.h>
+#include <linux/delay.h>
+
+/* bit definitions of Status Query Interface 2 */
+#define STATUS2_CHG			(1 << 2)
+#define STATUS2_BAT			(1 << 3)
+#define STATUS2_VBUS			(1 << 4)
+
+/* bit definitions of Measurement Enable 1 Register */
+#define MEAS1_TINT			(1 << 3)
+#define MEAS1_GP1			(1 << 5)
+
+/* bit definitions of Measurement Enable 3 Register */
+#define MEAS3_IBAT			(1 << 0)
+#define MEAS3_BAT_DET			(1 << 1)
+#define MEAS3_CC			(1 << 2)
+
+/* bit definitions of Measurement Off Time Register */
+#define MEAS_OFF_SLEEP_EN		(1 << 1)
+
+/* bit definitions of GPADC Bias Current 2 Register */
+#define GPBIAS2_GPADC1_SET		(2 << 4)
+/* GPADC1 Bias Current value in uA unit */
+#define GPBIAS2_GPADC1_UA		((GPBIAS2_GPADC1_SET >> 4) * 5 + 1)
+
+/* bit definitions of GPADC Misc 1 Register */
+#define GPMISC1_GPADC_EN		(1 << 0)
+
+/* bit definitions of Charger Control 6 Register */
+#define CC6_BAT_DET_GPADC1		1
+
+/* bit definitions of Coulomb Counter Reading Register */
+#define CCNT_AVG_SEL			(4 << 3)
+
+/* bit definitions of RTC miscellaneous Register1 */
+#define RTC_SOC_5LSB		(0x1F << 3)
+
+/* bit definitions of RTC Register1 */
+#define RTC_SOC_3MSB		(0x7)
+
+/* bit definitions of Power up Log register */
+#define BAT_WU_LOG			(1<<6)
+
+/* coulomb counter index */
+#define CCNT_POS1			0
+#define CCNT_POS2			1
+#define CCNT_NEG1			2
+#define CCNT_NEG2			3
+#define CCNT_SPOS			4
+#define CCNT_SNEG			5
+
+/* OCV -- Open Circuit Voltage */
+#define OCV_MODE_ACTIVE			0
+#define OCV_MODE_SLEEP			1
+
+/* Vbat range of CC for measuring Rbat */
+#define LOW_BAT_THRESHOLD		3600
+#define VBATT_RESISTOR_MIN		3800
+#define VBATT_RESISTOR_MAX		4100
+
+/* TBAT for batt, TINT for chip itself */
+#define PM860X_TEMP_TINT		(0)
+#define PM860X_TEMP_TBAT		(1)
+
+/*
+ * Battery temperature based on NTC resistor, defined
+ * corresponding resistor value  -- Ohm / C degeree.
+ */
+#define TBAT_NEG_25D		127773	/* -25 */
+#define TBAT_NEG_10D		54564	/* -10 */
+#define TBAT_0D			32330	/* 0 */
+#define TBAT_10D		19785	/* 10 */
+#define TBAT_20D		12468	/* 20 */
+#define TBAT_30D		8072	/* 30 */
+#define TBAT_40D		5356	/* 40 */
+
+struct pm860x_battery_info {
+	struct pm860x_chip *chip;
+	struct i2c_client *i2c;
+	struct device *dev;
+
+	struct power_supply battery;
+	struct mutex lock;
+	int status;
+	int irq_cc;
+	int irq_batt;
+	int max_capacity;
+	int resistor;		/* Battery Internal Resistor */
+	int last_capacity;
+	int start_soc;
+	unsigned present:1;
+	unsigned temp_type:1;	/* TINT or TBAT */
+};
+
+struct ccnt {
+	unsigned long long int pos;
+	unsigned long long int neg;
+	unsigned int spos;
+	unsigned int sneg;
+
+	int total_chg;		/* mAh(3.6C) */
+	int total_dischg;	/* mAh(3.6C) */
+};
+
+/*
+ * State of Charge.
+ * The first number is mAh(=3.6C), and the second number is percent point.
+ */
+int array_soc[][2] = {
+	{4170, 100}, {4154, 99}, {4136, 98}, {4122, 97}, {4107, 96},
+	{4102, 95}, {4088, 94}, {4081, 93}, {4070, 92}, {4060, 91},
+	{4053, 90}, {4044, 89}, {4035, 88}, {4028, 87}, {4019, 86},
+	{4013, 85}, {4006, 84}, {3995, 83}, {3987, 82}, {3982, 81},
+	{3976, 80}, {3968, 79}, {3962, 78}, {3954, 77}, {3946, 76},
+	{3941, 75}, {3934, 74}, {3929, 73}, {3922, 72}, {3916, 71},
+	{3910, 70}, {3904, 69}, {3898, 68}, {3892, 67}, {3887, 66},
+	{3880, 65}, {3874, 64}, {3868, 63}, {3862, 62}, {3854, 61},
+	{3849, 60}, {3843, 59}, {3840, 58}, {3833, 57}, {3829, 56},
+	{3824, 55}, {3818, 54}, {3815, 53}, {3810, 52}, {3808, 51},
+	{3804, 50}, {3801, 49}, {3798, 48}, {3796, 47}, {3792, 46},
+	{3789, 45}, {3785, 44}, {3784, 43}, {3782, 42}, {3780, 41},
+	{3777, 40}, {3776, 39}, {3774, 38}, {3772, 37}, {3771, 36},
+	{3769, 35}, {3768, 34}, {3764, 33}, {3763, 32}, {3760, 31},
+	{3760, 30}, {3754, 29}, {3750, 28}, {3749, 27}, {3744, 26},
+	{3740, 25}, {3734, 24}, {3732, 23}, {3728, 22}, {3726, 21},
+	{3720, 20}, {3716, 19}, {3709, 18}, {3703, 17}, {3698, 16},
+	{3692, 15}, {3683, 14}, {3675, 13}, {3670, 12}, {3665, 11},
+	{3661, 10}, {3649, 9}, {3637, 8}, {3622, 7}, {3609, 6},
+	{3580, 5}, {3558, 4}, {3540, 3}, {3510, 2}, {3429, 1},
+};
+
+static struct ccnt ccnt_data;
+
+/*
+ * register 1 bit[7:0] -- bit[11:4] of measured value of voltage
+ * register 0 bit[3:0] -- bit[3:0] of measured value of voltage
+ */
+static int measure_12bit_voltage(struct pm860x_battery_info *info,
+				 int offset, int *data)
+{
+	unsigned char buf[2];
+	int ret;
+
+	ret = pm860x_bulk_read(info->i2c, offset, 2, buf);
+	if (ret < 0)
+		return ret;
+
+	*data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f);
+	/* V_MEAS(mV) = data * 1.8 * 1000 / (2^12) */
+	*data = ((*data & 0xfff) * 9 * 25) >> 9;
+	return 0;
+}
+
+static int measure_vbatt(struct pm860x_battery_info *info, int state,
+			 int *data)
+{
+	unsigned char buf[5];
+	int ret;
+
+	switch (state) {
+	case OCV_MODE_ACTIVE:
+		ret = measure_12bit_voltage(info, PM8607_VBAT_MEAS1, data);
+		if (ret)
+			return ret;
+		/* V_BATT_MEAS(mV) = value * 3 * 1.8 * 1000 / (2^12) */
+		*data *= 3;
+		break;
+	case OCV_MODE_SLEEP:
+		/*
+		 * voltage value of VBATT in sleep mode is saved in different
+		 * registers.
+		 * bit[11:10] -- bit[7:6] of LDO9(0x18)
+		 * bit[9:8] -- bit[7:6] of LDO8(0x17)
+		 * bit[7:6] -- bit[7:6] of LDO7(0x16)
+		 * bit[5:4] -- bit[7:6] of LDO6(0x15)
+		 * bit[3:0] -- bit[7:4] of LDO5(0x14)
+		 */
+		ret = pm860x_bulk_read(info->i2c, PM8607_LDO5, 5, buf);
+		if (ret < 0)
+			return ret;
+		ret = ((buf[4] >> 6) << 10) | ((buf[3] >> 6) << 8)
+		    | ((buf[2] >> 6) << 6) | ((buf[1] >> 6) << 4)
+		    | (buf[0] >> 4);
+		/* V_BATT_MEAS(mV) = data * 3 * 1.8 * 1000 / (2^12) */
+		*data = ((*data & 0xff) * 27 * 25) >> 9;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * Return value is signed data.
+ * Negative value means discharging, and positive value means charging.
+ */
+static int measure_current(struct pm860x_battery_info *info, int *data)
+{
+	unsigned char buf[2];
+	short s;
+	int ret;
+
+	ret = pm860x_bulk_read(info->i2c, PM8607_IBAT_MEAS1, 2, buf);
+	if (ret < 0)
+		return ret;
+
+	s = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff);
+	/* current(mA) = value * 0.125 */
+	*data = s >> 3;
+	return 0;
+}
+
+static int set_charger_current(struct pm860x_battery_info *info, int data,
+			       int *old)
+{
+	int ret;
+
+	if (data < 50 || data > 1600 || !old)
+		return -EINVAL;
+
+	data = ((data - 50) / 50) & 0x1f;
+	*old = pm860x_reg_read(info->i2c, PM8607_CHG_CTRL2);
+	*old = (*old & 0x1f) * 50 + 50;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f, data);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int read_ccnt(struct pm860x_battery_info *info, int offset,
+		     int *ccnt)
+{
+	unsigned char buf[2];
+	int ret;
+
+	ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7, offset & 7);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_bulk_read(info->i2c, PM8607_CCNT_MEAS1, 2, buf);
+	if (ret < 0)
+		goto out;
+	*ccnt = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff);
+	return 0;
+out:
+	return ret;
+}
+
+static int calc_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt)
+{
+	unsigned int sum;
+	int ret;
+	int data;
+
+	ret = read_ccnt(info, CCNT_POS1, &data);
+	if (ret)
+		goto out;
+	sum = data & 0xffff;
+	ret = read_ccnt(info, CCNT_POS2, &data);
+	if (ret)
+		goto out;
+	sum |= (data & 0xffff) << 16;
+	ccnt->pos += sum;
+
+	ret = read_ccnt(info, CCNT_NEG1, &data);
+	if (ret)
+		goto out;
+	sum = data & 0xffff;
+	ret = read_ccnt(info, CCNT_NEG2, &data);
+	if (ret)
+		goto out;
+	sum |= (data & 0xffff) << 16;
+	sum = ~sum + 1;		/* since it's negative */
+	ccnt->neg += sum;
+
+	ret = read_ccnt(info, CCNT_SPOS, &data);
+	if (ret)
+		goto out;
+	ccnt->spos += data;
+	ret = read_ccnt(info, CCNT_SNEG, &data);
+	if (ret)
+		goto out;
+
+	/*
+	 * charge(mAh)  = count * 1.6984 * 1e(-8)
+	 *              = count * 16984 * 1.024 * 1.024 * 1.024 / (2 ^ 40)
+	 *              = count * 18236 / (2 ^ 40)
+	 */
+	ccnt->total_chg = (int) ((ccnt->pos * 18236) >> 40);
+	ccnt->total_dischg = (int) ((ccnt->neg * 18236) >> 40);
+	return 0;
+out:
+	return ret;
+}
+
+static int clear_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt)
+{
+	int data;
+
+	memset(ccnt, 0, sizeof(*ccnt));
+	/* read to clear ccnt */
+	read_ccnt(info, CCNT_POS1, &data);
+	read_ccnt(info, CCNT_POS2, &data);
+	read_ccnt(info, CCNT_NEG1, &data);
+	read_ccnt(info, CCNT_NEG2, &data);
+	read_ccnt(info, CCNT_SPOS, &data);
+	read_ccnt(info, CCNT_SNEG, &data);
+	return 0;
+}
+
+/* Calculate Open Circuit Voltage */
+static int calc_ocv(struct pm860x_battery_info *info, int *ocv)
+{
+	int ret;
+	int i;
+	int data;
+	int vbatt_avg;
+	int vbatt_sum;
+	int ibatt_avg;
+	int ibatt_sum;
+
+	if (!ocv)
+		return -EINVAL;
+
+	for (i = 0, ibatt_sum = 0, vbatt_sum = 0; i < 10; i++) {
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			goto out;
+		vbatt_sum += data;
+		ret = measure_current(info, &data);
+		if (ret)
+			goto out;
+		ibatt_sum += data;
+	}
+	vbatt_avg = vbatt_sum / 10;
+	ibatt_avg = ibatt_sum / 10;
+
+	mutex_lock(&info->lock);
+	if (info->present)
+		*ocv = vbatt_avg - ibatt_avg * info->resistor / 1000;
+	else
+		*ocv = vbatt_avg;
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "VBAT average:%d, OCV:%d\n", vbatt_avg, *ocv);
+	return 0;
+out:
+	return ret;
+}
+
+/* Calculate State of Charge (percent points) */
+static int calc_soc(struct pm860x_battery_info *info, int state, int *soc)
+{
+	int i;
+	int ocv;
+	int count;
+	int ret = -EINVAL;
+
+	if (!soc)
+		return -EINVAL;
+
+	switch (state) {
+	case OCV_MODE_ACTIVE:
+		ret = calc_ocv(info, &ocv);
+		break;
+	case OCV_MODE_SLEEP:
+		ret = measure_vbatt(info, OCV_MODE_SLEEP, &ocv);
+		break;
+	}
+	if (ret)
+		return ret;
+
+	count = ARRAY_SIZE(array_soc);
+	if (ocv < array_soc[count - 1][0]) {
+		*soc = 0;
+		return 0;
+	}
+
+	for (i = 0; i < count; i++) {
+		if (ocv >= array_soc[i][0]) {
+			*soc = array_soc[i][1];
+			break;
+		}
+	}
+	return 0;
+}
+
+static irqreturn_t pm860x_coulomb_handler(int irq, void *data)
+{
+	struct pm860x_battery_info *info = data;
+
+	calc_ccnt(info, &ccnt_data);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_batt_handler(int irq, void *data)
+{
+	struct pm860x_battery_info *info = data;
+	int ret;
+
+	mutex_lock(&info->lock);
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret & STATUS2_BAT) {
+		info->present = 1;
+		info->temp_type = PM860X_TEMP_TBAT;
+	} else {
+		info->present = 0;
+		info->temp_type = PM860X_TEMP_TINT;
+	}
+	mutex_unlock(&info->lock);
+	/* clear ccnt since battery is attached or dettached */
+	clear_ccnt(info, &ccnt_data);
+	return IRQ_HANDLED;
+}
+
+static void pm860x_init_battery(struct pm860x_battery_info *info)
+{
+	unsigned char buf[2];
+	int ret;
+	int data;
+	int bat_remove;
+	int soc;
+
+	/* measure enable on GPADC1 */
+	data = MEAS1_GP1;
+	if (info->temp_type == PM860X_TEMP_TINT)
+		data |= MEAS1_TINT;
+	ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN1, data, data);
+	if (ret)
+		goto out;
+
+	/* measure enable on IBAT, BAT_DET, CC. IBAT is depend on CC. */
+	data = MEAS3_IBAT | MEAS3_BAT_DET | MEAS3_CC;
+	ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN3, data, data);
+	if (ret)
+		goto out;
+
+	/* measure disable CC in sleep time  */
+	ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME1, 0x82);
+	if (ret)
+		goto out;
+	ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME2, 0x6c);
+	if (ret)
+		goto out;
+
+	/* enable GPADC */
+	ret = pm860x_set_bits(info->i2c, PM8607_GPADC_MISC1,
+			    GPMISC1_GPADC_EN, GPMISC1_GPADC_EN);
+	if (ret < 0)
+		goto out;
+
+	/* detect battery via GPADC1 */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6,
+			    CC6_BAT_DET_GPADC1, CC6_BAT_DET_GPADC1);
+	if (ret < 0)
+		goto out;
+
+	ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7 << 3,
+			      CCNT_AVG_SEL);
+	if (ret < 0)
+		goto out;
+
+	/* set GPADC1 bias */
+	ret = pm860x_set_bits(info->i2c, PM8607_GP_BIAS2, 0xF << 4,
+			      GPBIAS2_GPADC1_SET);
+	if (ret < 0)
+		goto out;
+
+	/* check whether battery present) */
+	mutex_lock(&info->lock);
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret < 0) {
+		mutex_unlock(&info->lock);
+		goto out;
+	}
+	if (ret & STATUS2_BAT) {
+		info->present = 1;
+		info->temp_type = PM860X_TEMP_TBAT;
+	} else {
+		info->present = 0;
+		info->temp_type = PM860X_TEMP_TINT;
+	}
+	mutex_unlock(&info->lock);
+
+	calc_soc(info, OCV_MODE_ACTIVE, &soc);
+
+	data = pm860x_reg_read(info->i2c, PM8607_POWER_UP_LOG);
+	bat_remove = data & BAT_WU_LOG;
+
+	dev_dbg(info->dev, "battery wake up? %s\n",
+		bat_remove != 0 ? "yes" : "no");
+
+	/* restore SOC from RTC domain register */
+	if (bat_remove == 0) {
+		buf[0] = pm860x_reg_read(info->i2c, PM8607_RTC_MISC2);
+		buf[1] = pm860x_reg_read(info->i2c, PM8607_RTC1);
+		data = ((buf[1] & 0x3) << 5) | ((buf[0] >> 3) & 0x1F);
+		if (data > soc + 15)
+			info->start_soc = soc;
+		else if (data < soc - 15)
+			info->start_soc = soc;
+		else
+			info->start_soc = data;
+		dev_dbg(info->dev, "soc_rtc %d, soc_ocv :%d\n", data, soc);
+	} else {
+		pm860x_set_bits(info->i2c, PM8607_POWER_UP_LOG,
+				BAT_WU_LOG, BAT_WU_LOG);
+		info->start_soc = soc;
+	}
+	info->last_capacity = info->start_soc;
+	dev_dbg(info->dev, "init soc : %d\n", info->last_capacity);
+out:
+	return;
+}
+
+static void set_temp_threshold(struct pm860x_battery_info *info,
+			       int min, int max)
+{
+	int data;
+
+	/* (tmp << 8) / 1800 */
+	if (min <= 0)
+		data = 0;
+	else
+		data = (min << 8) / 1800;
+	pm860x_reg_write(info->i2c, PM8607_GPADC1_HIGHTH, data);
+	dev_dbg(info->dev, "TEMP_HIGHTH : min: %d, 0x%x\n", min, data);
+
+	if (max <= 0)
+		data = 0xff;
+	else
+		data = (max << 8) / 1800;
+	pm860x_reg_write(info->i2c, PM8607_GPADC1_LOWTH, data);
+	dev_dbg(info->dev, "TEMP_LOWTH:max : %d, 0x%x\n", max, data);
+}
+
+static int measure_temp(struct pm860x_battery_info *info, int *data)
+{
+	int ret;
+	int temp;
+	int min;
+	int max;
+
+	if (info->temp_type == PM860X_TEMP_TINT) {
+		ret = measure_12bit_voltage(info, PM8607_TINT_MEAS1, data);
+		if (ret)
+			return ret;
+		*data = (*data - 884) * 1000 / 3611;
+	} else {
+		ret = measure_12bit_voltage(info, PM8607_GPADC1_MEAS1, data);
+		if (ret)
+			return ret;
+		/* meausered Vtbat(mV) / Ibias_current(11uA)*/
+		*data = (*data * 1000) / GPBIAS2_GPADC1_UA;
+
+		if (*data > TBAT_NEG_25D) {
+			temp = -30;	/* over cold , suppose -30 roughly */
+			max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, 0, max);
+		} else if (*data > TBAT_NEG_10D) {
+			temp = -15;	/* -15 degree, code */
+			max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, 0, max);
+		} else if (*data > TBAT_0D) {
+			temp = -5;	/* -5 degree */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else if (*data > TBAT_10D) {
+			temp = 5;	/* in range of (0, 10) */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else if (*data > TBAT_20D) {
+			temp = 15;	/* in range of (10, 20) */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else if (*data > TBAT_30D) {
+			temp = 25;	/* in range of (20, 30) */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else if (*data > TBAT_40D) {
+			temp = 35;	/* in range of (30, 40) */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else {
+			min = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, 0);
+			temp = 45;	/* over heat ,suppose 45 roughly */
+		}
+
+		dev_dbg(info->dev, "temp_C:%d C,temp_mv:%d mv\n", temp, *data);
+		*data = temp;
+	}
+	return 0;
+}
+
+static int calc_resistor(struct pm860x_battery_info *info)
+{
+	int vbatt_sum1;
+	int vbatt_sum2;
+	int chg_current;
+	int ibatt_sum1;
+	int ibatt_sum2;
+	int data;
+	int ret;
+	int i;
+
+	ret = measure_current(info, &data);
+	/* make sure that charging is launched by data > 0 */
+	if (ret || data < 0)
+		goto out;
+
+	ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+	if (ret)
+		goto out;
+	/* calculate resistor only in CC charge mode */
+	if (data < VBATT_RESISTOR_MIN || data > VBATT_RESISTOR_MAX)
+		goto out;
+
+	/* current is saved */
+	if (set_charger_current(info, 500, &chg_current))
+		goto out;
+
+	/*
+	 * set charge current as 500mA, wait about 500ms till charging
+	 * process is launched and stable with the newer charging current.
+	 */
+	msleep(500);
+
+	for (i = 0, vbatt_sum1 = 0, ibatt_sum1 = 0; i < 10; i++) {
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			goto out_meas;
+		vbatt_sum1 += data;
+		ret = measure_current(info, &data);
+		if (ret)
+			goto out_meas;
+
+		if (data < 0)
+			ibatt_sum1 = ibatt_sum1 - data;	/* discharging */
+		else
+			ibatt_sum1 = ibatt_sum1 + data;	/* charging */
+	}
+
+	if (set_charger_current(info, 100, &ret))
+		goto out_meas;
+	/*
+	 * set charge current as 100mA, wait about 500ms till charging
+	 * process is launched and stable with the newer charging current.
+	 */
+	msleep(500);
+
+	for (i = 0, vbatt_sum2 = 0, ibatt_sum2 = 0; i < 10; i++) {
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			goto out_meas;
+		vbatt_sum2 += data;
+		ret = measure_current(info, &data);
+		if (ret)
+			goto out_meas;
+
+		if (data < 0)
+			ibatt_sum2 = ibatt_sum2 - data;	/* discharging */
+		else
+			ibatt_sum2 = ibatt_sum2 + data;	/* charging */
+	}
+
+	/* restore current setting */
+	if (set_charger_current(info, chg_current, &ret))
+		goto out_meas;
+
+	if ((vbatt_sum1 > vbatt_sum2) && (ibatt_sum1 > ibatt_sum2) &&
+			(ibatt_sum2 > 0)) {
+		/* calculate resistor in discharging case */
+		data = 1000 * (vbatt_sum1 - vbatt_sum2)
+		    / (ibatt_sum1 - ibatt_sum2);
+		if ((data - info->resistor > 0) &&
+				(data - info->resistor < info->resistor))
+			info->resistor = data;
+		if ((info->resistor - data > 0) &&
+				(info->resistor - data < data))
+			info->resistor = data;
+	}
+	return 0;
+
+out_meas:
+	set_charger_current(info, chg_current, &ret);
+out:
+	return -EINVAL;
+}
+
+static int calc_capacity(struct pm860x_battery_info *info, int *cap)
+{
+	int ret;
+	int data;
+	int ibat;
+	int cap_ocv = 0;
+	int cap_cc = 0;
+
+	ret = calc_ccnt(info, &ccnt_data);
+	if (ret)
+		goto out;
+soc:
+	data = info->max_capacity * info->start_soc / 100;
+	if (ccnt_data.total_dischg - ccnt_data.total_chg <= data) {
+		cap_cc =
+		    data + ccnt_data.total_chg - ccnt_data.total_dischg;
+	} else {
+		clear_ccnt(info, &ccnt_data);
+		calc_soc(info, OCV_MODE_ACTIVE, &info->start_soc);
+		dev_dbg(info->dev, "restart soc = %d !\n",
+			info->start_soc);
+		goto soc;
+	}
+
+	cap_cc = cap_cc * 100 / info->max_capacity;
+	if (cap_cc < 0)
+		cap_cc = 0;
+	else if (cap_cc > 100)
+		cap_cc = 100;
+
+	dev_dbg(info->dev, "%s, last cap : %d", __func__,
+		info->last_capacity);
+
+	ret = measure_current(info, &ibat);
+	if (ret)
+		goto out;
+	/* Calculate the capacity when discharging(ibat < 0) */
+	if (ibat < 0) {
+		ret = calc_soc(info, OCV_MODE_ACTIVE, &cap_ocv);
+		if (ret)
+			cap_ocv = info->last_capacity;
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			goto out;
+		if (data <= LOW_BAT_THRESHOLD) {
+			/* choose the lower capacity value to report
+			 * between vbat and CC when vbat < 3.6v;
+			 * than 3.6v;
+			 */
+			*cap = min(cap_ocv, cap_cc);
+		} else {
+			/* when detect vbat > 3.6v, but cap_cc < 15,and
+			 * cap_ocv is 10% larger than cap_cc, we can think
+			 * CC have some accumulation error, switch to OCV
+			 * to estimate capacity;
+			 * */
+			if (cap_cc < 15 && cap_ocv - cap_cc > 10)
+				*cap = cap_ocv;
+			else
+				*cap = cap_cc;
+		}
+		/* when discharging, make sure current capacity
+		 * is lower than last*/
+		if (*cap > info->last_capacity)
+			*cap = info->last_capacity;
+	} else {
+		*cap = cap_cc;
+	}
+	info->last_capacity = *cap;
+
+	dev_dbg(info->dev, "%s, cap_ocv:%d cap_cc:%d, cap:%d\n",
+		(ibat < 0) ? "discharging" : "charging",
+		 cap_ocv, cap_cc, *cap);
+	/*
+	 * store the current capacity to RTC domain register,
+	 * after next power up , it will be restored.
+	 */
+	pm860x_set_bits(info->i2c, PM8607_RTC_MISC2, RTC_SOC_5LSB,
+			(*cap & 0x1F) << 3);
+	pm860x_set_bits(info->i2c, PM8607_RTC1, RTC_SOC_3MSB,
+			((*cap >> 5) & 0x3));
+	return 0;
+out:
+	return ret;
+}
+
+static void pm860x_external_power_changed(struct power_supply *psy)
+{
+	struct pm860x_battery_info *info;
+
+	info = container_of(psy, struct pm860x_battery_info, battery);
+	calc_resistor(info);
+}
+
+static int pm860x_batt_get_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct pm860x_battery_info *info = dev_get_drvdata(psy->dev->parent);
+	int data;
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = info->present;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = calc_capacity(info, &data);
+		if (ret)
+			return ret;
+		if (data < 0)
+			data = 0;
+		else if (data > 100)
+			data = 100;
+		/* return 100 if battery is not attached */
+		if (!info->present)
+			data = 100;
+		val->intval = data;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		/* return real vbatt Voltage */
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			return ret;
+		val->intval = data * 1000;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		/* return Open Circuit Voltage (not measured voltage) */
+		ret = calc_ocv(info, &data);
+		if (ret)
+			return ret;
+		val->intval = data * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = measure_current(info, &data);
+		if (ret)
+			return ret;
+		val->intval = data;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		if (info->present) {
+			ret = measure_temp(info, &data);
+			if (ret)
+				return ret;
+			data *= 10;
+		} else {
+			/* Fake Temp 25C Without Battery */
+			data = 250;
+		}
+		val->intval = data;
+		break;
+	default:
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int pm860x_batt_set_prop(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       const union power_supply_propval *val)
+{
+	struct pm860x_battery_info *info = dev_get_drvdata(psy->dev->parent);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		clear_ccnt(info, &ccnt_data);
+		info->start_soc = 100;
+		dev_dbg(info->dev, "chg done, update soc = %d\n",
+			info->start_soc);
+		break;
+	default:
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+
+static enum power_supply_property pm860x_batt_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static __devinit int pm860x_battery_probe(struct platform_device *pdev)
+{
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct pm860x_battery_info *info;
+	struct pm860x_power_pdata *pdata;
+	int ret;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->irq_cc = platform_get_irq(pdev, 0);
+	if (info->irq_cc <= 0) {
+		dev_err(&pdev->dev, "No IRQ resource!\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	info->irq_batt = platform_get_irq(pdev, 1);
+	if (info->irq_batt <= 0) {
+		dev_err(&pdev->dev, "No IRQ resource!\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	info->chip = chip;
+	info->i2c =
+	    (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
+	info->dev = &pdev->dev;
+	info->status = POWER_SUPPLY_STATUS_UNKNOWN;
+	pdata = pdev->dev.platform_data;
+
+	mutex_init(&info->lock);
+	platform_set_drvdata(pdev, info);
+
+	pm860x_init_battery(info);
+
+	info->battery.name = "battery-monitor";
+	info->battery.type = POWER_SUPPLY_TYPE_BATTERY;
+	info->battery.properties = pm860x_batt_props;
+	info->battery.num_properties = ARRAY_SIZE(pm860x_batt_props);
+	info->battery.get_property = pm860x_batt_get_prop;
+	info->battery.set_property = pm860x_batt_set_prop;
+	info->battery.external_power_changed = pm860x_external_power_changed;
+
+	if (pdata && pdata->max_capacity)
+		info->max_capacity = pdata->max_capacity;
+	else
+		info->max_capacity = 1500;	/* set default capacity */
+	if (pdata && pdata->resistor)
+		info->resistor = pdata->resistor;
+	else
+		info->resistor = 300;	/* set default internal resistor */
+
+	ret = power_supply_register(&pdev->dev, &info->battery);
+	if (ret)
+		goto out;
+	info->battery.dev->parent = &pdev->dev;
+
+	ret = request_threaded_irq(info->irq_cc, NULL,
+				pm860x_coulomb_handler, IRQF_ONESHOT,
+				"coulomb", info);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+			info->irq_cc, ret);
+		goto out_reg;
+	}
+
+	ret = request_threaded_irq(info->irq_batt, NULL, pm860x_batt_handler,
+				IRQF_ONESHOT, "battery", info);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+			info->irq_batt, ret);
+		goto out_coulomb;
+	}
+
+
+	return 0;
+
+out_coulomb:
+	free_irq(info->irq_cc, info);
+out_reg:
+	power_supply_unregister(&info->battery);
+out:
+	kfree(info);
+	return ret;
+}
+
+static int __devexit pm860x_battery_remove(struct platform_device *pdev)
+{
+	struct pm860x_battery_info *info = platform_get_drvdata(pdev);
+
+	power_supply_unregister(&info->battery);
+	free_irq(info->irq_batt, info);
+	free_irq(info->irq_cc, info);
+	kfree(info);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pm860x_battery_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag |= 1 << PM8607_IRQ_CC;
+	return 0;
+}
+
+static int pm860x_battery_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag &= ~(1 << PM8607_IRQ_CC);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm860x_battery_pm_ops,
+			pm860x_battery_suspend, pm860x_battery_resume);
+
+static struct platform_driver pm860x_battery_driver = {
+	.driver = {
+		   .name = "88pm860x-battery",
+		   .owner = THIS_MODULE,
+		   .pm = &pm860x_battery_pm_ops,
+	},
+	.probe = pm860x_battery_probe,
+	.remove = __devexit_p(pm860x_battery_remove),
+};
+module_platform_driver(pm860x_battery_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM860x Battery driver");
+MODULE_LICENSE("GPL");