power: move power supply drivers to power/supply

This moves all power supply drivers from drivers/power/
to drivers/power/supply/. The intention is a cleaner
source tree, since drivers/power/ also contains frameworks
unrelated to power supply, like adaptive voltage scaling.

Signed-off-by: Sebastian Reichel <sre@kernel.org>

1 files changed, 0 insertions, 475 deletions

diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
deleted file mode 100644
index a1b7e05..0000000
--- a/drivers/power/ds2782_battery.c
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC
- *
- * Copyright (C) 2009 Bluewater Systems Ltd
- *
- * Author: Ryan Mallon
- *
- * DS2786 added by Yulia Vilensky <vilensky@compulab.co.il>
- *
- * UEvent sending added by Evgeny Romanov <romanov@neurosoft.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/swab.h>
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <linux/idr.h>
-#include <linux/power_supply.h>
-#include <linux/slab.h>
-#include <linux/ds2782_battery.h>
-
-#define DS2782_REG_RARC		0x06	/* Remaining active relative capacity */
-
-#define DS278x_REG_VOLT_MSB	0x0c
-#define DS278x_REG_TEMP_MSB	0x0a
-#define DS278x_REG_CURRENT_MSB	0x0e
-
-/* EEPROM Block */
-#define DS2782_REG_RSNSP	0x69	/* Sense resistor value */
-
-/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
-#define DS2782_CURRENT_UNITS	1563
-
-#define DS2786_REG_RARC		0x02	/* Remaining active relative capacity */
-
-#define DS2786_CURRENT_UNITS	25
-
-#define DS278x_DELAY		1000
-
-struct ds278x_info;
-
-struct ds278x_battery_ops {
-	int (*get_battery_current)(struct ds278x_info *info, int *current_uA);
-	int (*get_battery_voltage)(struct ds278x_info *info, int *voltage_uV);
-	int (*get_battery_capacity)(struct ds278x_info *info, int *capacity);
-};
-
-#define to_ds278x_info(x) power_supply_get_drvdata(x)
-
-struct ds278x_info {
-	struct i2c_client	*client;
-	struct power_supply	*battery;
-	struct power_supply_desc	battery_desc;
-	const struct ds278x_battery_ops *ops;
-	struct delayed_work	bat_work;
-	int			id;
-	int                     rsns;
-	int			capacity;
-	int			status;		/* State Of Charge */
-};
-
-static DEFINE_IDR(battery_id);
-static DEFINE_MUTEX(battery_lock);
-
-static inline int ds278x_read_reg(struct ds278x_info *info, int reg, u8 *val)
-{
-	int ret;
-
-	ret = i2c_smbus_read_byte_data(info->client, reg);
-	if (ret < 0) {
-		dev_err(&info->client->dev, "register read failed\n");
-		return ret;
-	}
-
-	*val = ret;
-	return 0;
-}
-
-static inline int ds278x_read_reg16(struct ds278x_info *info, int reg_msb,
-				    s16 *val)
-{
-	int ret;
-
-	ret = i2c_smbus_read_word_data(info->client, reg_msb);
-	if (ret < 0) {
-		dev_err(&info->client->dev, "register read failed\n");
-		return ret;
-	}
-
-	*val = swab16(ret);
-	return 0;
-}
-
-static int ds278x_get_temp(struct ds278x_info *info, int *temp)
-{
-	s16 raw;
-	int err;
-
-	/*
-	 * Temperature is measured in units of 0.125 degrees celcius, the
-	 * power_supply class measures temperature in tenths of degrees
-	 * celsius. The temperature value is stored as a 10 bit number, plus
-	 * sign in the upper bits of a 16 bit register.
-	 */
-	err = ds278x_read_reg16(info, DS278x_REG_TEMP_MSB, &raw);
-	if (err)
-		return err;
-	*temp = ((raw / 32) * 125) / 100;
-	return 0;
-}
-
-static int ds2782_get_current(struct ds278x_info *info, int *current_uA)
-{
-	int sense_res;
-	int err;
-	u8 sense_res_raw;
-	s16 raw;
-
-	/*
-	 * The units of measurement for current are dependent on the value of
-	 * the sense resistor.
-	 */
-	err = ds278x_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
-	if (err)
-		return err;
-	if (sense_res_raw == 0) {
-		dev_err(&info->client->dev, "sense resistor value is 0\n");
-		return -ENXIO;
-	}
-	sense_res = 1000 / sense_res_raw;
-
-	dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
-		sense_res);
-	err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw);
-	if (err)
-		return err;
-	*current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
-	return 0;
-}
-
-static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uV)
-{
-	s16 raw;
-	int err;
-
-	/*
-	 * Voltage is measured in units of 4.88mV. The voltage is stored as
-	 * a 10-bit number plus sign, in the upper bits of a 16-bit register
-	 */
-	err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
-	if (err)
-		return err;
-	*voltage_uV = (raw / 32) * 4800;
-	return 0;
-}
-
-static int ds2782_get_capacity(struct ds278x_info *info, int *capacity)
-{
-	int err;
-	u8 raw;
-
-	err = ds278x_read_reg(info, DS2782_REG_RARC, &raw);
-	if (err)
-		return err;
-	*capacity = raw;
-	return 0;
-}
-
-static int ds2786_get_current(struct ds278x_info *info, int *current_uA)
-{
-	int err;
-	s16 raw;
-
-	err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw);
-	if (err)
-		return err;
-	*current_uA = (raw / 16) * (DS2786_CURRENT_UNITS / info->rsns);
-	return 0;
-}
-
-static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uV)
-{
-	s16 raw;
-	int err;
-
-	/*
-	 * Voltage is measured in units of 1.22mV. The voltage is stored as
-	 * a 12-bit number plus sign, in the upper bits of a 16-bit register
-	 */
-	err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
-	if (err)
-		return err;
-	*voltage_uV = (raw / 8) * 1220;
-	return 0;
-}
-
-static int ds2786_get_capacity(struct ds278x_info *info, int *capacity)
-{
-	int err;
-	u8 raw;
-
-	err = ds278x_read_reg(info, DS2786_REG_RARC, &raw);
-	if (err)
-		return err;
-	/* Relative capacity is displayed with resolution 0.5 % */
-	*capacity = raw/2 ;
-	return 0;
-}
-
-static int ds278x_get_status(struct ds278x_info *info, int *status)
-{
-	int err;
-	int current_uA;
-	int capacity;
-
-	err = info->ops->get_battery_current(info, &current_uA);
-	if (err)
-		return err;
-
-	err = info->ops->get_battery_capacity(info, &capacity);
-	if (err)
-		return err;
-
-	info->capacity = capacity;
-
-	if (capacity == 100)
-		*status = POWER_SUPPLY_STATUS_FULL;
-	else if (current_uA == 0)
-		*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
-	else if (current_uA < 0)
-		*status = POWER_SUPPLY_STATUS_DISCHARGING;
-	else
-		*status = POWER_SUPPLY_STATUS_CHARGING;
-
-	return 0;
-}
-
-static int ds278x_battery_get_property(struct power_supply *psy,
-				       enum power_supply_property prop,
-				       union power_supply_propval *val)
-{
-	struct ds278x_info *info = to_ds278x_info(psy);
-	int ret;
-
-	switch (prop) {
-	case POWER_SUPPLY_PROP_STATUS:
-		ret = ds278x_get_status(info, &val->intval);
-		break;
-
-	case POWER_SUPPLY_PROP_CAPACITY:
-		ret = info->ops->get_battery_capacity(info, &val->intval);
-		break;
-
-	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-		ret = info->ops->get_battery_voltage(info, &val->intval);
-		break;
-
-	case POWER_SUPPLY_PROP_CURRENT_NOW:
-		ret = info->ops->get_battery_current(info, &val->intval);
-		break;
-
-	case POWER_SUPPLY_PROP_TEMP:
-		ret = ds278x_get_temp(info, &val->intval);
-		break;
-
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-static void ds278x_bat_update(struct ds278x_info *info)
-{
-	int old_status = info->status;
-	int old_capacity = info->capacity;
-
-	ds278x_get_status(info, &info->status);
-
-	if ((old_status != info->status) || (old_capacity != info->capacity))
-		power_supply_changed(info->battery);
-}
-
-static void ds278x_bat_work(struct work_struct *work)
-{
-	struct ds278x_info *info;
-
-	info = container_of(work, struct ds278x_info, bat_work.work);
-	ds278x_bat_update(info);
-
-	schedule_delayed_work(&info->bat_work, DS278x_DELAY);
-}
-
-static enum power_supply_property ds278x_battery_props[] = {
-	POWER_SUPPLY_PROP_STATUS,
-	POWER_SUPPLY_PROP_CAPACITY,
-	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-	POWER_SUPPLY_PROP_CURRENT_NOW,
-	POWER_SUPPLY_PROP_TEMP,
-};
-
-static void ds278x_power_supply_init(struct power_supply_desc *battery)
-{
-	battery->type			= POWER_SUPPLY_TYPE_BATTERY;
-	battery->properties		= ds278x_battery_props;
-	battery->num_properties		= ARRAY_SIZE(ds278x_battery_props);
-	battery->get_property		= ds278x_battery_get_property;
-	battery->external_power_changed	= NULL;
-}
-
-static int ds278x_battery_remove(struct i2c_client *client)
-{
-	struct ds278x_info *info = i2c_get_clientdata(client);
-
-	power_supply_unregister(info->battery);
-	kfree(info->battery_desc.name);
-
-	mutex_lock(&battery_lock);
-	idr_remove(&battery_id, info->id);
-	mutex_unlock(&battery_lock);
-
-	cancel_delayed_work(&info->bat_work);
-
-	kfree(info);
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-
-static int ds278x_suspend(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct ds278x_info *info = i2c_get_clientdata(client);
-
-	cancel_delayed_work(&info->bat_work);
-	return 0;
-}
-
-static int ds278x_resume(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct ds278x_info *info = i2c_get_clientdata(client);
-
-	schedule_delayed_work(&info->bat_work, DS278x_DELAY);
-	return 0;
-}
-#endif /* CONFIG_PM_SLEEP */
-
-static SIMPLE_DEV_PM_OPS(ds278x_battery_pm_ops, ds278x_suspend, ds278x_resume);
-
-enum ds278x_num_id {
-	DS2782 = 0,
-	DS2786,
-};
-
-static const struct ds278x_battery_ops ds278x_ops[] = {
-	[DS2782] = {
-		.get_battery_current  = ds2782_get_current,
-		.get_battery_voltage  = ds2782_get_voltage,
-		.get_battery_capacity = ds2782_get_capacity,
-	},
-	[DS2786] = {
-		.get_battery_current  = ds2786_get_current,
-		.get_battery_voltage  = ds2786_get_voltage,
-		.get_battery_capacity = ds2786_get_capacity,
-	}
-};
-
-static int ds278x_battery_probe(struct i2c_client *client,
-				const struct i2c_device_id *id)
-{
-	struct ds278x_platform_data *pdata = client->dev.platform_data;
-	struct power_supply_config psy_cfg = {};
-	struct ds278x_info *info;
-	int ret;
-	int num;
-
-	/*
-	 * ds2786 should have the sense resistor value set
-	 * in the platform data
-	 */
-	if (id->driver_data == DS2786 && !pdata) {
-		dev_err(&client->dev, "missing platform data for ds2786\n");
-		return -EINVAL;
-	}
-
-	/* Get an ID for this battery */
-	mutex_lock(&battery_lock);
-	ret = idr_alloc(&battery_id, client, 0, 0, GFP_KERNEL);
-	mutex_unlock(&battery_lock);
-	if (ret < 0)
-		goto fail_id;
-	num = ret;
-
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
-	if (!info) {
-		ret = -ENOMEM;
-		goto fail_info;
-	}
-
-	info->battery_desc.name = kasprintf(GFP_KERNEL, "%s-%d",
-					    client->name, num);
-	if (!info->battery_desc.name) {
-		ret = -ENOMEM;
-		goto fail_name;
-	}
-
-	if (id->driver_data == DS2786)
-		info->rsns = pdata->rsns;
-
-	i2c_set_clientdata(client, info);
-	info->client = client;
-	info->id = num;
-	info->ops  = &ds278x_ops[id->driver_data];
-	ds278x_power_supply_init(&info->battery_desc);
-	psy_cfg.drv_data = info;
-
-	info->capacity = 100;
-	info->status = POWER_SUPPLY_STATUS_FULL;
-
-	INIT_DELAYED_WORK(&info->bat_work, ds278x_bat_work);
-
-	info->battery = power_supply_register(&client->dev,
-					      &info->battery_desc, &psy_cfg);
-	if (IS_ERR(info->battery)) {
-		dev_err(&client->dev, "failed to register battery\n");
-		ret = PTR_ERR(info->battery);
-		goto fail_register;
-	} else {
-		schedule_delayed_work(&info->bat_work, DS278x_DELAY);
-	}
-
-	return 0;
-
-fail_register:
-	kfree(info->battery_desc.name);
-fail_name:
-	kfree(info);
-fail_info:
-	mutex_lock(&battery_lock);
-	idr_remove(&battery_id, num);
-	mutex_unlock(&battery_lock);
-fail_id:
-	return ret;
-}
-
-static const struct i2c_device_id ds278x_id[] = {
-	{"ds2782", DS2782},
-	{"ds2786", DS2786},
-	{},
-};
-MODULE_DEVICE_TABLE(i2c, ds278x_id);
-
-static struct i2c_driver ds278x_battery_driver = {
-	.driver 	= {
-		.name	= "ds2782-battery",
-		.pm	= &ds278x_battery_pm_ops,
-	},
-	.probe		= ds278x_battery_probe,
-	.remove		= ds278x_battery_remove,
-	.id_table	= ds278x_id,
-};
-module_i2c_driver(ds278x_battery_driver);
-
-MODULE_AUTHOR("Ryan Mallon");
-MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");
-MODULE_LICENSE("GPL");