diff options
| author | Andrew Lunn <andrew.lunn@ruag.com> | 2012-12-28 12:25:09 (GMT) |
|---|---|---|
| committer | Anton Vorontsov <anton@enomsg.org> | 2013-01-06 22:00:23 (GMT) |
| commit | e8fc721a9ab8dd6723063a92f5c5fdb5eaffbd6e (patch) | |
| tree | b00f842e79fdd1730e87395a7f1d1983d7cd0fd3 /drivers/power/reset/Kconfig | |
| parent | 22f1229fe9a6790695f72b1cdba56fcaee867d75 (diff) | |
| download | linux-e8fc721a9ab8dd6723063a92f5c5fdb5eaffbd6e.tar.xz | |
power/reset: Add a new driver to turn QNAP board power off
The QNAP NAS boxes have a microcontroller attached to the SoCs second
serial port. By sending it a simple command, it will turn the power for
the board off. This driver registers a function for pm_power_off to send
such a command.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Diffstat (limited to 'drivers/power/reset/Kconfig')
| -rw-r--r-- | drivers/power/reset/Kconfig | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 6461b48..6453aac 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -13,3 +13,12 @@ config POWER_RESET_GPIO This driver supports turning off your board via a GPIO line. If your board needs a GPIO high/low to power down, say Y and create a binding in your devicetree. + +config POWER_RESET_QNAP + bool "QNAP power-off driver" + depends on OF_GPIO && POWER_RESET && PLAT_ORION + help + This driver supports turning off QNAP NAS devices by sending + commands to the microcontroller which controls the main power. + + Say Y if you have a QNAP NAS. |