diff options
author | Tuomas Tynkkynen <ttynkkynen@nvidia.com> | 2014-07-21 15:38:48 (GMT) |
---|---|---|
committer | Mark Brown <broonie@linaro.org> | 2014-07-25 17:43:48 (GMT) |
commit | 04eca28cde52cdf9eb91e127cc358ad79a8ec53b (patch) | |
tree | cb4507f5e7f2430325312c86332fbe3ce887879b /drivers/regulator | |
parent | 7171511eaec5bf23fb06078f59784a3a0626b38f (diff) | |
download | linux-04eca28cde52cdf9eb91e127cc358ad79a8ec53b.tar.xz |
regulator: Add helpers for low-level register access
Add helper functions that allow regulator consumers to obtain low-level
details about the regulator hardware, like the voltage selector register
address and such. These details can be useful when configuring hardware
or firmware that want to do low-level access to regulators, with no
involvement from the kernel.
The use-case for Tegra is a voltage-controlled oscillator clocksource
which has control logic to change the supply voltage via I2C to achieve
a desired output clock rate.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/core.c | 71 |
1 files changed, 71 insertions, 0 deletions
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 4c1f999..486b590 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2222,6 +2222,77 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector) EXPORT_SYMBOL_GPL(regulator_list_voltage); /** + * regulator_get_regmap - get the regulator's register map + * @regulator: regulator source + * + * Returns the register map for the given regulator, or an ERR_PTR value + * if the regulator doesn't use regmap. + */ +struct regmap *regulator_get_regmap(struct regulator *regulator) +{ + struct regmap *map = regulator->rdev->regmap; + + return map ? map : ERR_PTR(-EOPNOTSUPP); +} + +/** + * regulator_get_hardware_vsel_register - get the HW voltage selector register + * @regulator: regulator source + * @vsel_reg: voltage selector register, output parameter + * @vsel_mask: mask for voltage selector bitfield, output parameter + * + * Returns the hardware register offset and bitmask used for setting the + * regulator voltage. This might be useful when configuring voltage-scaling + * hardware or firmware that can make I2C requests behind the kernel's back, + * for example. + * + * On success, the output parameters @vsel_reg and @vsel_mask are filled in + * and 0 is returned, otherwise a negative errno is returned. + */ +int regulator_get_hardware_vsel_register(struct regulator *regulator, + unsigned *vsel_reg, + unsigned *vsel_mask) +{ + struct regulator_dev *rdev = regulator->rdev; + struct regulator_ops *ops = rdev->desc->ops; + + if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap) + return -EOPNOTSUPP; + + *vsel_reg = rdev->desc->vsel_reg; + *vsel_mask = rdev->desc->vsel_mask; + + return 0; +} +EXPORT_SYMBOL_GPL(regulator_get_hardware_vsel_register); + +/** + * regulator_list_hardware_vsel - get the HW-specific register value for a selector + * @regulator: regulator source + * @selector: identify voltage to list + * + * Converts the selector to a hardware-specific voltage selector that can be + * directly written to the regulator registers. The address of the voltage + * register can be determined by calling @regulator_get_hardware_vsel_register. + * + * On error a negative errno is returned. + */ +int regulator_list_hardware_vsel(struct regulator *regulator, + unsigned selector) +{ + struct regulator_dev *rdev = regulator->rdev; + struct regulator_ops *ops = rdev->desc->ops; + + if (selector >= rdev->desc->n_voltages) + return -EINVAL; + if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap) + return -EOPNOTSUPP; + + return selector; +} +EXPORT_SYMBOL_GPL(regulator_list_hardware_vsel); + +/** * regulator_get_linear_step - return the voltage step size between VSEL values * @regulator: regulator source * |