Merge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "RTC for 4.8

  Cleanups:
   - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup
     rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
   - move mn10300 to rtc-cmos

  Subsystem:
   - fix wakealarms after hibernate
   - multiples fixes for rctest
   - simplify implementations of .read_alarm

  New drivers:
   - Maxim MAX6916

  Drivers:
   - ds1307: fix weekday
   - m41t80: add wakeup support
   - pcf85063: add support for PCF85063A variant
   - rv8803: extend i2c fix and other fixes
   - s35390a: fix alarm reading, this fixes instant reboot after
     shutdown for QNAP TS-41x
   - s3c: clock fixes"

* tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits)
  rtc: rv8803: Clear V1F when setting the time
  rtc: rv8803: Stop the clock while setting the time
  rtc: rv8803: Always apply the I²C workaround
  rtc: rv8803: Fix read day of week
  rtc: rv8803: Remove the check for valid time
  rtc: rv8803: Kconfig: Indicate rx8900 support
  rtc: asm9260: remove .owner field for driver
  rtc: at91sam9: Fix missing spin_lock_init()
  rtc: m41t80: add suspend handlers for alarm IRQ
  rtc: m41t80: make it a real error message
  rtc: pcf85063: Add support for the PCF85063A device
  rtc: pcf85063: fix year range
  rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy
  rtc: explicitly set tm_sec = 0 for drivers with minute accurancy
  rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
  rtc: s3c: Remove unnecessary call to disable already disabled clock
  rtc: abx80x: use devm_add_action_or_reset()
  rtc: m41t80: use devm_add_action_or_reset()
  rtc: fix a typo and reduce three empty lines to one
  rtc: s35390a: improve two comments in .set_alarm
  ...

1 files changed, 1 insertions, 41 deletions

diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index a45845a..17b6235 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -481,7 +481,6 @@ static int sh_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 	tm->tm_mon	= sh_rtc_read_alarm_value(rtc, RMONAR);
 	if (tm->tm_mon > 0)
 		tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
-	tm->tm_year     = 0xffff;
 
 	wkalrm->enabled = (readb(rtc->regbase + RCR1) & RCR1_AIE) ? 1 : 0;
 
@@ -500,52 +499,13 @@ static inline void sh_rtc_write_alarm_value(struct sh_rtc *rtc,
 		writeb(bin2bcd(value) | AR_ENB,  rtc->regbase + reg_off);
 }
 
-static int sh_rtc_check_alarm(struct rtc_time *tm)
-{
-	/*
-	 * The original rtc says anything > 0xc0 is "don't care" or "match
-	 * all" - most users use 0xff but rtc-dev uses -1 for the same thing.
-	 * The original rtc doesn't support years - some things use -1 and
-	 * some 0xffff. We use -1 to make out tests easier.
-	 */
-	if (tm->tm_year == 0xffff)
-		tm->tm_year = -1;
-	if (tm->tm_mon >= 0xff)
-		tm->tm_mon = -1;
-	if (tm->tm_mday >= 0xff)
-		tm->tm_mday = -1;
-	if (tm->tm_wday >= 0xff)
-		tm->tm_wday = -1;
-	if (tm->tm_hour >= 0xff)
-		tm->tm_hour = -1;
-	if (tm->tm_min >= 0xff)
-		tm->tm_min = -1;
-	if (tm->tm_sec >= 0xff)
-		tm->tm_sec = -1;
-
-	if (tm->tm_year > 9999 ||
-		tm->tm_mon >= 12 ||
-		tm->tm_mday == 0 || tm->tm_mday >= 32 ||
-		tm->tm_wday >= 7 ||
-		tm->tm_hour >= 24 ||
-		tm->tm_min >= 60 ||
-		tm->tm_sec >= 60)
-		return -EINVAL;
-
-	return 0;
-}
-
 static int sh_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct sh_rtc *rtc = platform_get_drvdata(pdev);
 	unsigned int rcr1;
 	struct rtc_time *tm = &wkalrm->time;
-	int mon, err;
-
-	err = sh_rtc_check_alarm(tm);
-	if (unlikely(err < 0))
-		return err;
+	int mon;
 
 	spin_lock_irq(&rtc->lock);