diff options
author | Kevin Hilman <khilman@deeprootsystems.com> | 2010-05-19 18:37:20 (GMT) |
---|---|---|
committer | Kevin Hilman <khilman@deeprootsystems.com> | 2010-05-19 18:37:20 (GMT) |
commit | 5e682ef825302f2378726e44257291eaeadbfd50 (patch) | |
tree | c4b55e4d8705dd8dc7f374dfab46a0deb2edb7c7 /drivers/rtc | |
parent | 7735227e76e1660e448ec66c30e7bfd06f7cd9b7 (diff) | |
download | linux-5e682ef825302f2378726e44257291eaeadbfd50.tar.xz |
Revert "rtc: omap: let device wakeup capability be configured from chip init logic"
This reverts commit 9c0a342c45b2d98209ac473ea7a429ddd5c1b473 because
it was included without proper signoffs from RTC maintainers.
Diffstat (limited to 'drivers/rtc')
-rw-r--r-- | drivers/rtc/rtc-omap.c | 12 |
1 files changed, 5 insertions, 7 deletions
diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 73377b0..64d9727 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -34,8 +34,7 @@ * Board-specific wiring options include using split power mode with * RTC_OFF_NOFF used as the reset signal (so the RTC won't be reset), * and wiring RTC_WAKE_INT (so the RTC alarm can wake the system from - * low power modes) for OMAP1 boards (OMAP-L138 has this built into - * the SoC). See the BOARD-SPECIFIC CUSTOMIZATION comment. + * low power modes). See the BOARD-SPECIFIC CUSTOMIZATION comment. */ #define OMAP_RTC_BASE 0xfffb4800 @@ -402,17 +401,16 @@ static int __init omap_rtc_probe(struct platform_device *pdev) /* BOARD-SPECIFIC CUSTOMIZATION CAN GO HERE: * - * - Device wake-up capability setting should come through chip - * init logic. OMAP1 boards should initialize the "wakeup capable" - * flag in the platform device if the board is wired right for - * being woken up by RTC alarm. For OMAP-L138, this capability - * is built into the SoC by the "Deep Sleep" capability. + * - Boards wired so that RTC_WAKE_INT does something, and muxed + * right (W13_1610_RTC_WAKE_INT is the default after chip reset), + * should initialize the device wakeup flag appropriately. * * - Boards wired so RTC_ON_nOFF is used as the reset signal, * rather than nPWRON_RESET, should forcibly enable split * power mode. (Some chip errata report that RTC_CTRL_SPLIT * is write-only, and always reads as zero...) */ + device_init_wakeup(&pdev->dev, 0); if (new_ctrl & (u8) OMAP_RTC_CTRL_SPLIT) pr_info("%s: split power mode\n", pdev->name); |