diff options
author | Andrew Vasquez <andrew.vasquez@qlogic.com> | 2005-07-06 17:30:26 (GMT) |
---|---|---|
committer | James Bottomley <jejb@mulgrave.(none)> | 2005-07-14 14:54:46 (GMT) |
commit | 3d71644cf952fd1157a13173237258422ba3c569 (patch) | |
tree | 1bae220781b973a9dca754a08aa7630e05ffc50e /drivers/scsi/qla2xxx/qla_def.h | |
parent | ac96202ba096f8fc1ccaf45a2f159a52639ece29 (diff) | |
download | linux-3d71644cf952fd1157a13173237258422ba3c569.tar.xz |
[SCSI] qla2xxx: Add ISP24xx definitions.
Add ISP24xx definitions.
Add requisite structure definitions and #define's for ISP24xx
support. Also drop volatile modifiers from device_reg_* register
layouts as the members are never really accessed, only their
offsets within the layout are used during reads and writes.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_def.h')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_def.h | 278 |
1 files changed, 181 insertions, 97 deletions
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 13901c2..03074e5 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -75,9 +75,28 @@ #define IS_QLA6322(ha) 0 #endif +#if defined(CONFIG_SCSI_QLA24XX) || defined(CONFIG_SCSI_QLA24XX_MODULE) +#define IS_QLA2422(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422) +#define IS_QLA2432(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432) +#else +#define IS_QLA2422(ha) 0 +#define IS_QLA2432(ha) 0 +#endif + +#if defined(CONFIG_SCSI_QLA25XX) || defined(CONFIG_SCSI_QLA25XX_MODULE) +#define IS_QLA2512(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2512) +#define IS_QLA2522(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2522) +#else +#define IS_QLA2512(ha) 0 +#define IS_QLA2522(ha) 0 +#endif + #define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \ IS_QLA6312(ha) || IS_QLA6322(ha)) +#define IS_QLA24XX(ha) (IS_QLA2422(ha) || IS_QLA2432(ha)) +#define IS_QLA25XX(ha) (IS_QLA2512(ha) || IS_QLA2522(ha)) + /* * Only non-ISP2[12]00 have extended addressing support in the firmware. */ @@ -191,10 +210,18 @@ #define MANAGEMENT_SERVER 0xfe #define BROADCAST 0xff -#define RESERVED_LOOP_ID(x) ((x > LAST_LOCAL_LOOP_ID && \ - x < SNS_FIRST_LOOP_ID) || \ - x == MANAGEMENT_SERVER || \ - x == BROADCAST) +/* + * There is no correspondence between an N-PORT id and an AL_PA. Therefore the + * valid range of an N-PORT id is 0 through 0x7ef. + */ +#define NPH_LAST_HANDLE 0x7ef +#define NPH_SNS 0x7fc /* FFFFFC */ +#define NPH_FABRIC_CONTROLLER 0x7fd /* FFFFFD */ +#define NPH_F_PORT 0x7fe /* FFFFFE */ +#define NPH_IP_BROADCAST 0x7ff /* FFFFFF */ + +#define MAX_CMDSZ 16 /* SCSI maximum CDB size. */ +#include "qla_fw.h" /* * Timeout timer counts in seconds @@ -211,6 +238,7 @@ #define REQUEST_ENTRY_CNT_2100 128 /* Number of request entries. */ #define REQUEST_ENTRY_CNT_2200 2048 /* Number of request entries. */ #define REQUEST_ENTRY_CNT_2XXX_EXT_MEM 4096 /* Number of request entries. */ +#define REQUEST_ENTRY_CNT_24XX 4096 /* Number of request entries. */ #define RESPONSE_ENTRY_CNT_2100 64 /* Number of response entries.*/ #define RESPONSE_ENTRY_CNT_2300 512 /* Number of response entries.*/ @@ -279,24 +307,24 @@ typedef struct srb { /* * ISP I/O Register Set structure definitions. */ -typedef volatile struct { - volatile uint16_t flash_address; /* Flash BIOS address */ - volatile uint16_t flash_data; /* Flash BIOS data */ +struct device_reg_2xxx { + uint16_t flash_address; /* Flash BIOS address */ + uint16_t flash_data; /* Flash BIOS data */ uint16_t unused_1[1]; /* Gap */ - volatile uint16_t ctrl_status; /* Control/Status */ + uint16_t ctrl_status; /* Control/Status */ #define CSR_FLASH_64K_BANK BIT_3 /* Flash upper 64K bank select */ #define CSR_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable */ #define CSR_ISP_SOFT_RESET BIT_0 /* ISP soft reset */ - volatile uint16_t ictrl; /* Interrupt control */ + uint16_t ictrl; /* Interrupt control */ #define ICR_EN_INT BIT_15 /* ISP enable interrupts. */ #define ICR_EN_RISC BIT_3 /* ISP enable RISC interrupts. */ - volatile uint16_t istatus; /* Interrupt status */ + uint16_t istatus; /* Interrupt status */ #define ISR_RISC_INT BIT_3 /* RISC interrupt */ - volatile uint16_t semaphore; /* Semaphore */ - volatile uint16_t nvram; /* NVRAM register. */ + uint16_t semaphore; /* Semaphore */ + uint16_t nvram; /* NVRAM register. */ #define NVR_DESELECT 0 #define NVR_BUSY BIT_15 #define NVR_WRT_ENABLE BIT_14 /* Write enable */ @@ -308,78 +336,78 @@ typedef volatile struct { union { struct { - volatile uint16_t mailbox0; - volatile uint16_t mailbox1; - volatile uint16_t mailbox2; - volatile uint16_t mailbox3; - volatile uint16_t mailbox4; - volatile uint16_t mailbox5; - volatile uint16_t mailbox6; - volatile uint16_t mailbox7; - uint16_t unused_2[59]; /* Gap */ + uint16_t mailbox0; + uint16_t mailbox1; + uint16_t mailbox2; + uint16_t mailbox3; + uint16_t mailbox4; + uint16_t mailbox5; + uint16_t mailbox6; + uint16_t mailbox7; + uint16_t unused_2[59]; /* Gap */ } __attribute__((packed)) isp2100; struct { - /* Request Queue */ - volatile uint16_t req_q_in; /* In-Pointer */ - volatile uint16_t req_q_out; /* Out-Pointer */ - /* Response Queue */ - volatile uint16_t rsp_q_in; /* In-Pointer */ - volatile uint16_t rsp_q_out; /* Out-Pointer */ + /* Request Queue */ + uint16_t req_q_in; /* In-Pointer */ + uint16_t req_q_out; /* Out-Pointer */ + /* Response Queue */ + uint16_t rsp_q_in; /* In-Pointer */ + uint16_t rsp_q_out; /* Out-Pointer */ /* RISC to Host Status */ - volatile uint32_t host_status; + uint32_t host_status; #define HSR_RISC_INT BIT_15 /* RISC interrupt */ #define HSR_RISC_PAUSED BIT_8 /* RISC Paused */ /* Host to Host Semaphore */ - volatile uint16_t host_semaphore; - uint16_t unused_3[17]; /* Gap */ - volatile uint16_t mailbox0; - volatile uint16_t mailbox1; - volatile uint16_t mailbox2; - volatile uint16_t mailbox3; - volatile uint16_t mailbox4; - volatile uint16_t mailbox5; - volatile uint16_t mailbox6; - volatile uint16_t mailbox7; - volatile uint16_t mailbox8; - volatile uint16_t mailbox9; - volatile uint16_t mailbox10; - volatile uint16_t mailbox11; - volatile uint16_t mailbox12; - volatile uint16_t mailbox13; - volatile uint16_t mailbox14; - volatile uint16_t mailbox15; - volatile uint16_t mailbox16; - volatile uint16_t mailbox17; - volatile uint16_t mailbox18; - volatile uint16_t mailbox19; - volatile uint16_t mailbox20; - volatile uint16_t mailbox21; - volatile uint16_t mailbox22; - volatile uint16_t mailbox23; - volatile uint16_t mailbox24; - volatile uint16_t mailbox25; - volatile uint16_t mailbox26; - volatile uint16_t mailbox27; - volatile uint16_t mailbox28; - volatile uint16_t mailbox29; - volatile uint16_t mailbox30; - volatile uint16_t mailbox31; - volatile uint16_t fb_cmd; - uint16_t unused_4[10]; /* Gap */ + uint16_t host_semaphore; + uint16_t unused_3[17]; /* Gap */ + uint16_t mailbox0; + uint16_t mailbox1; + uint16_t mailbox2; + uint16_t mailbox3; + uint16_t mailbox4; + uint16_t mailbox5; + uint16_t mailbox6; + uint16_t mailbox7; + uint16_t mailbox8; + uint16_t mailbox9; + uint16_t mailbox10; + uint16_t mailbox11; + uint16_t mailbox12; + uint16_t mailbox13; + uint16_t mailbox14; + uint16_t mailbox15; + uint16_t mailbox16; + uint16_t mailbox17; + uint16_t mailbox18; + uint16_t mailbox19; + uint16_t mailbox20; + uint16_t mailbox21; + uint16_t mailbox22; + uint16_t mailbox23; + uint16_t mailbox24; + uint16_t mailbox25; + uint16_t mailbox26; + uint16_t mailbox27; + uint16_t mailbox28; + uint16_t mailbox29; + uint16_t mailbox30; + uint16_t mailbox31; + uint16_t fb_cmd; + uint16_t unused_4[10]; /* Gap */ } __attribute__((packed)) isp2300; } u; - volatile uint16_t fpm_diag_config; + uint16_t fpm_diag_config; uint16_t unused_5[0x6]; /* Gap */ - volatile uint16_t pcr; /* Processor Control Register. */ + uint16_t pcr; /* Processor Control Register. */ uint16_t unused_6[0x5]; /* Gap */ - volatile uint16_t mctr; /* Memory Configuration and Timing. */ + uint16_t mctr; /* Memory Configuration and Timing. */ uint16_t unused_7[0x3]; /* Gap */ - volatile uint16_t fb_cmd_2100; /* Unused on 23XX */ + uint16_t fb_cmd_2100; /* Unused on 23XX */ uint16_t unused_8[0x3]; /* Gap */ - volatile uint16_t hccr; /* Host command & control register. */ + uint16_t hccr; /* Host command & control register. */ #define HCCR_HOST_INT BIT_7 /* Host interrupt bit */ #define HCCR_RISC_PAUSE BIT_5 /* Pause mode bit */ /* HCCR commands */ @@ -393,8 +421,8 @@ typedef volatile struct { #define HCCR_ENABLE_PARITY 0xA000 /* Enable PARITY interrupt */ uint16_t unused_9[5]; /* Gap */ - volatile uint16_t gpiod; /* GPIO Data register. */ - volatile uint16_t gpioe; /* GPIO Enable register. */ + uint16_t gpiod; /* GPIO Data register. */ + uint16_t gpioe; /* GPIO Enable register. */ #define GPIO_LED_MASK 0x00C0 #define GPIO_LED_GREEN_OFF_AMBER_OFF 0x0000 #define GPIO_LED_GREEN_ON_AMBER_OFF 0x0040 @@ -403,25 +431,32 @@ typedef volatile struct { union { struct { - uint16_t unused_10[8]; /* Gap */ - volatile uint16_t mailbox8; - volatile uint16_t mailbox9; - volatile uint16_t mailbox10; - volatile uint16_t mailbox11; - volatile uint16_t mailbox12; - volatile uint16_t mailbox13; - volatile uint16_t mailbox14; - volatile uint16_t mailbox15; - volatile uint16_t mailbox16; - volatile uint16_t mailbox17; - volatile uint16_t mailbox18; - volatile uint16_t mailbox19; - volatile uint16_t mailbox20; - volatile uint16_t mailbox21; - volatile uint16_t mailbox22; - volatile uint16_t mailbox23; /* Also probe reg. */ + uint16_t unused_10[8]; /* Gap */ + uint16_t mailbox8; + uint16_t mailbox9; + uint16_t mailbox10; + uint16_t mailbox11; + uint16_t mailbox12; + uint16_t mailbox13; + uint16_t mailbox14; + uint16_t mailbox15; + uint16_t mailbox16; + uint16_t mailbox17; + uint16_t mailbox18; + uint16_t mailbox19; + uint16_t mailbox20; + uint16_t mailbox21; + uint16_t mailbox22; + uint16_t mailbox23; /* Also probe reg. */ } __attribute__((packed)) isp2200; } u_end; +}; + +typedef struct { + union { + struct device_reg_2xxx isp; + struct device_reg_24xx isp24; + }; } device_reg_t; #define ISP_REQ_Q_IN(ha, reg) \ @@ -504,6 +539,8 @@ typedef struct { #define MBS_LOOP_ID_USED 0x4008 #define MBS_ALL_IDS_IN_USE 0x4009 #define MBS_NOT_LOGGED_IN 0x400A +#define MBS_LINK_DOWN_ERROR 0x400B +#define MBS_DIAG_ECHO_TEST_ERROR 0x400C /* * ISP mailbox asynchronous event status codes @@ -555,7 +592,7 @@ typedef struct { #define FO1_CTIO_RETRY BIT_3 #define FO1_DISABLE_LIP_F7_SW BIT_4 #define FO1_DISABLE_100MS_LOS_WAIT BIT_5 -#define FO1_DISABLE_GPIO6_7 BIT_6 +#define FO1_DISABLE_GPIO6_7 BIT_6 /* LED bits */ #define FO1_AE_ON_LOOP_INIT_ERR BIT_7 #define FO1_SET_EMPHASIS_SWING BIT_8 #define FO1_AE_AUTO_BYPASS BIT_9 @@ -570,6 +607,15 @@ typedef struct { #define FO3_ENABLE_EMERG_IOCB BIT_0 #define FO3_AE_RND_ERROR BIT_1 +/* 24XX additional firmware options */ +#define ADD_FO_COUNT 3 +#define ADD_FO1_DISABLE_GPIO_LED_CTRL BIT_6 /* LED bits */ +#define ADD_FO1_ENABLE_PUREX_IOCB BIT_10 + +#define ADD_FO2_ENABLE_SEL_CLS2 BIT_5 + +#define ADD_FO3_NO_ABT_ON_LINK_DOWN BIT_14 + /* * ISP mailbox commands */ @@ -638,6 +684,22 @@ typedef struct { #define MBC_SEND_LFA_COMMAND 0x7D /* Send Loop Fabric Address */ #define MBC_LUN_RESET 0x7E /* Send LUN reset */ +/* + * ISP24xx mailbox commands + */ +#define MBC_SERDES_PARAMS 0x10 /* Serdes Tx Parameters. */ +#define MBC_GET_IOCB_STATUS 0x12 /* Get IOCB status command. */ +#define MBC_GET_TIMEOUT_PARAMS 0x22 /* Get FW timeouts. */ +#define MBC_GEN_SYSTEM_ERROR 0x2a /* Generate System Error. */ +#define MBC_SET_TIMEOUT_PARAMS 0x32 /* Set FW timeouts. */ +#define MBC_MID_INITIALIZE_FIRMWARE 0x48 /* MID Initialize firmware. */ +#define MBC_MID_GET_VP_DATABASE 0x49 /* MID Get VP Database. */ +#define MBC_MID_GET_VP_ENTRY 0x4a /* MID Get VP Entry. */ +#define MBC_HOST_MEMORY_COPY 0x53 /* Host Memory Copy. */ +#define MBC_SEND_RNFT_ELS 0x5e /* Send RNFT ELS request */ +#define MBC_GET_LINK_PRIV_STATS 0x6d /* Get link & private data. */ +#define MBC_SET_VENDOR_ID 0x76 /* Set Vendor ID. */ + /* Firmware return data sizes */ #define FCAL_MAP_SIZE 128 @@ -867,6 +929,9 @@ typedef struct { /* * Get Link Status mailbox command return buffer. */ +#define GLSO_SEND_RPS BIT_0 +#define GLSO_USE_DID BIT_3 + typedef struct { uint32_t link_fail_cnt; uint32_t loss_sync_cnt; @@ -1161,7 +1226,6 @@ do { \ * ISP queue - command entry structure definition. */ #define COMMAND_TYPE 0x11 /* Command entry */ -#define MAX_CMDSZ 16 /* SCSI maximum CDB size. */ typedef struct { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ @@ -1284,11 +1348,16 @@ typedef struct { /* * Status entry entry status */ +#define RF_RQ_DMA_ERROR BIT_6 /* Request Queue DMA error. */ #define RF_INV_E_ORDER BIT_5 /* Invalid entry order. */ #define RF_INV_E_COUNT BIT_4 /* Invalid entry count. */ #define RF_INV_E_PARAM BIT_3 /* Invalid entry parameter. */ #define RF_INV_E_TYPE BIT_2 /* Invalid entry type. */ #define RF_BUSY BIT_1 /* Busy */ +#define RF_MASK (RF_RQ_DMA_ERROR | RF_INV_E_ORDER | RF_INV_E_COUNT | \ + RF_INV_E_PARAM | RF_INV_E_TYPE | RF_BUSY) +#define RF_MASK_24XX (RF_INV_E_ORDER | RF_INV_E_COUNT | RF_INV_E_PARAM | \ + RF_INV_E_TYPE) /* * Status entry SCSI status bit definitions. @@ -1503,9 +1572,6 @@ typedef struct { port_id_t d_id; uint8_t node_name[WWN_SIZE]; uint8_t port_name[WWN_SIZE]; - uint32_t type; -#define SW_TYPE_IP BIT_1 -#define SW_TYPE_SCSI BIT_0 } sw_info_t; /* @@ -1520,6 +1586,8 @@ typedef struct { union { cmd_a64_entry_t cmd; sts_entry_t rsp; + struct cmd_type_7 cmd24; + struct sts_entry_24xx rsp24; } p; uint8_t inq[INQ_DATA_SIZE]; } inq_cmd_rsp_t; @@ -1555,10 +1623,13 @@ typedef struct { union { cmd_a64_entry_t cmd; sts_entry_t rsp; + struct cmd_type_7 cmd24; + struct sts_entry_24xx rsp24; } p; rpt_lun_lst_t list; } rpt_lun_cmd_rsp_t; + /* * Fibre channel port type. */ @@ -1646,6 +1717,7 @@ typedef struct fc_port { #define FCF_FAILOVER_DISABLE BIT_22 #define FCF_DSXXX_DEVICE BIT_23 #define FCF_AA_EVA_DEVICE BIT_24 +#define FCF_AA_MSA_DEVICE BIT_25 /* No loop ID flag. */ #define FC_NO_LOOP_ID 0x1000 @@ -1917,6 +1989,7 @@ struct qla_board_info { char isp_name[8]; struct qla_fw_info *fw_info; + char *fw_fname;; }; /* Return data from MBC_GET_ID_LIST call. */ @@ -1926,6 +1999,7 @@ struct gid_list_info { uint8_t domain; uint8_t loop_id_2100; /* ISP2100/ISP2200 -- 4 bytes. */ uint16_t loop_id; /* ISP23XX -- 6 bytes. */ + uint16_t reserved_1; /* ISP24XX -- 8 bytes. */ }; #define GID_LIST_SIZE (sizeof(struct gid_list_info) * MAX_FIBRE_DEVICES) @@ -2000,6 +2074,8 @@ typedef struct scsi_qla_host { uint32_t enable_lip_full_login :1; uint32_t enable_target_reset :1; uint32_t enable_led_scheme :1; + uint32_t msi_enabled :1; + uint32_t msix_enabled :1; } flags; atomic_t loop_state; @@ -2036,6 +2112,7 @@ typedef struct scsi_qla_host { #define IODESC_PROCESS_NEEDED 22 /* IO descriptor processing needed */ #define IOCTL_ERROR_RECOVERY 23 #define LOOP_RESET_NEEDED 24 +#define BEACON_BLINK_NEEDED 25 uint32_t device_flags; #define DFLG_LOCAL_DEVICES BIT_0 @@ -2119,6 +2196,7 @@ typedef struct scsi_qla_host { uint8_t serial2; /* NVRAM configuration data */ + uint16_t nvram_size; uint16_t nvram_base; uint16_t loop_reset_delay; @@ -2179,7 +2257,8 @@ typedef struct scsi_qla_host { struct dma_pool *s_dma_pool; dma_addr_t init_cb_dma; - init_cb_t *init_cb; + init_cb_t *init_cb; + int init_cb_size; dma_addr_t iodesc_pd_dma; port_database_t *iodesc_pd; @@ -2220,6 +2299,7 @@ typedef struct scsi_qla_host { uint16_t fw_options[16]; /* slots: 1,2,3,10,11 */ uint8_t fw_seriallink_options[4]; + uint16_t fw_seriallink_options24[4]; /* Firmware dump information. */ void *fw_dump; @@ -2228,8 +2308,12 @@ typedef struct scsi_qla_host { char *fw_dump_buffer; int fw_dump_buffer_len; + int fw_dumped; + void *fw_dump24; + int fw_dump24_len; + uint8_t host_str[16]; - uint16_t pci_attr; + uint32_t pci_attr; uint16_t product_id[4]; @@ -2237,8 +2321,8 @@ typedef struct scsi_qla_host { #define BINZERO "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" char *model_desc; - uint8_t node_name[WWN_SIZE]; - uint8_t nvram_version; + uint8_t *node_name; + uint8_t *port_name; uint32_t isp_abort_cnt; /* Needed for BEACON */ |