diff options
author | Andrew Vasquez <andrew.vasquez@qlogic.com> | 2005-07-06 17:32:07 (GMT) |
---|---|---|
committer | James Bottomley <jejb@mulgrave.(none)> | 2005-07-14 15:03:15 (GMT) |
commit | fa2a1ce53d4b869b74da9a770770c79f9af64914 (patch) | |
tree | da350e79117d3177f51c2788c51aeba425afd4ca /drivers/scsi/qla2xxx/qla_def.h | |
parent | ba5140b48e35aa4e4b57eb6db5cface63d7bd712 (diff) | |
download | linux-fa2a1ce53d4b869b74da9a770770c79f9af64914.tar.xz |
[SCSI] qla2xxx: Code scrubbing.
Code scrubbing.
- Remove trailing whitespace from driver files.
- Remove unused #defines and inlines.
- Standardize on C comments (// -> /* */)
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_def.h')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_def.h | 42 |
1 files changed, 21 insertions, 21 deletions
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 7c16180..bd87d5f 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -116,7 +116,7 @@ #include "qla_settings.h" -/* +/* * Data bit definitions */ #define BIT_0 0x1 @@ -194,8 +194,8 @@ #define MAX_TARGETS MAX_FIBRE_DEVICES #define MIN_LUNS 8 #define MAX_LUNS MAX_FIBRE_LUNS -#define MAX_CMDS_PER_LUN 255 - +#define MAX_CMDS_PER_LUN 255 + /* * Fibre Channel device definitions. */ @@ -243,7 +243,7 @@ #define RESPONSE_ENTRY_CNT_2300 512 /* Number of response entries.*/ /* - * SCSI Request Block + * SCSI Request Block */ typedef struct srb { struct list_head list; @@ -254,7 +254,7 @@ typedef struct srb { struct scsi_cmnd *cmd; /* Linux SCSI command pkt */ struct timer_list timer; /* Command timer */ - atomic_t ref_count; /* Reference count for this structure */ + atomic_t ref_count; /* Reference count for this structure */ uint16_t flags; /* Request state */ @@ -312,7 +312,7 @@ struct device_reg_2xxx { uint16_t flash_data; /* Flash BIOS data */ uint16_t unused_1[1]; /* Gap */ uint16_t ctrl_status; /* Control/Status */ -#define CSR_FLASH_64K_BANK BIT_3 /* Flash upper 64K bank select */ +#define CSR_FLASH_64K_BANK BIT_3 /* Flash upper 64K bank select */ #define CSR_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable */ #define CSR_ISP_SOFT_RESET BIT_0 /* ISP soft reset */ @@ -355,12 +355,12 @@ struct device_reg_2xxx { uint16_t rsp_q_out; /* Out-Pointer */ /* RISC to Host Status */ - uint32_t host_status; + uint32_t host_status; #define HSR_RISC_INT BIT_15 /* RISC interrupt */ #define HSR_RISC_PAUSED BIT_8 /* RISC Paused */ /* Host to Host Semaphore */ - uint16_t host_semaphore; + uint16_t host_semaphore; uint16_t unused_3[17]; /* Gap */ uint16_t mailbox0; uint16_t mailbox1; @@ -1057,7 +1057,7 @@ typedef struct { * LSB BIT 5 = Rx Sensitivity 1G bit 1 * LSB BIT 6 = Rx Sensitivity 1G bit 2 * LSB BIT 7 = Rx Sensitivity 1G bit 3 - * + * * MSB BIT 0 = Tx Sensitivity 2G bit 0 * MSB BIT 1 = Tx Sensitivity 2G bit 1 * MSB BIT 2 = Tx Sensitivity 2G bit 2 @@ -1075,7 +1075,7 @@ typedef struct { * LSB BIT 5 = Output Swing 2G bit 0 * LSB BIT 6 = Output Swing 2G bit 1 * LSB BIT 7 = Output Swing 2G bit 2 - * + * * MSB BIT 0 = Output Emphasis 2G bit 0 * MSB BIT 1 = Output Emphasis 2G bit 1 * MSB BIT 2 = Output Enable @@ -1997,7 +1997,7 @@ struct qla_board_info { struct gid_list_info { uint8_t al_pa; uint8_t area; - uint8_t domain; + uint8_t domain; uint8_t loop_id_2100; /* ISP2100/ISP2200 -- 4 bytes. */ uint16_t loop_id; /* ISP23XX -- 6 bytes. */ uint16_t reserved_1; /* ISP24XX -- 8 bytes. */ @@ -2111,7 +2111,7 @@ typedef struct scsi_qla_host { #define ISP_ABORT_RETRY 20 /* ISP aborted. */ #define FCPORT_RESCAN_NEEDED 21 /* IO descriptor processing needed */ #define IODESC_PROCESS_NEEDED 22 /* IO descriptor processing needed */ -#define IOCTL_ERROR_RECOVERY 23 +#define IOCTL_ERROR_RECOVERY 23 #define LOOP_RESET_NEEDED 24 #define BEACON_BLINK_NEEDED 25 @@ -2126,7 +2126,7 @@ typedef struct scsi_qla_host { #define SRB_MIN_REQ 128 mempool_t *srb_mempool; - /* This spinlock is used to protect "io transactions", you must + /* This spinlock is used to protect "io transactions", you must * aquire it before doing any IO to the card, eg with RD_REG*() and * WRT_REG*() for the duration of your entire commandtransaction. * @@ -2153,12 +2153,12 @@ typedef struct scsi_qla_host { response_t *response_ring_ptr; /* Current address. */ uint16_t rsp_ring_index; /* Current index. */ uint16_t response_q_length; - + struct isp_operations isp_ops; /* Outstandings ISP commands. */ srb_t *outstanding_cmds[MAX_OUTSTANDING_COMMANDS]; - uint32_t current_outstanding_cmd; + uint32_t current_outstanding_cmd; srb_t *status_srb; /* Status continuation entry. */ uint16_t revision; @@ -2187,7 +2187,7 @@ typedef struct scsi_qla_host { #define LOOP_P2P 2 #define P2P_LOOP 3 - uint8_t marker_needed; + uint8_t marker_needed; uint8_t interrupts_on; @@ -2208,7 +2208,7 @@ typedef struct scsi_qla_host { uint8_t mbx_count; uint16_t last_loop_id; - uint32_t login_retry_count; + uint32_t login_retry_count; /* Fibre Channel Device List. */ struct list_head fcports; @@ -2253,7 +2253,7 @@ typedef struct scsi_qla_host { dma_addr_t rlc_rsp_dma; rpt_lun_cmd_rsp_t *rlc_rsp; - /* Small DMA pool allocations -- maximum 256 bytes in length. */ + /* Small DMA pool allocations -- maximum 256 bytes in length. */ #define DMA_POOL_SIZE 256 struct dma_pool *s_dma_pool; @@ -2281,10 +2281,10 @@ typedef struct scsi_qla_host { uint32_t mbx_flags; #define MBX_IN_PROGRESS BIT_0 #define MBX_BUSY BIT_1 /* Got the Access */ -#define MBX_SLEEPING_ON_SEM BIT_2 +#define MBX_SLEEPING_ON_SEM BIT_2 #define MBX_POLLING_FOR_COMP BIT_3 #define MBX_COMPLETED BIT_4 -#define MBX_TIMEDOUT BIT_5 +#define MBX_TIMEDOUT BIT_5 #define MBX_ACCESS_TIMEDOUT BIT_6 mbx_cmd_t mc; @@ -2345,7 +2345,7 @@ typedef struct scsi_qla_host { test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \ test_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags)) || \ atomic_read(&ha->loop_state) == LOOP_DOWN) - + #define LOOP_RDY(ha) (!LOOP_NOT_READY(ha)) #define TGT_Q(ha, t) (ha->otgt[t]) |