diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/sata_sil.c | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/scsi/sata_sil.c')
-rw-r--r-- | drivers/scsi/sata_sil.c | 494 |
1 files changed, 494 insertions, 0 deletions
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c new file mode 100644 index 0000000..f0489dc --- /dev/null +++ b/drivers/scsi/sata_sil.c @@ -0,0 +1,494 @@ +/* + * sata_sil.c - Silicon Image SATA + * + * Maintained by: Jeff Garzik <jgarzik@pobox.com> + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003 Red Hat, Inc. + * Copyright 2003 Benjamin Herrenschmidt + * + * The contents of this file are subject to the Open + * Software License version 1.1 that can be found at + * http://www.opensource.org/licenses/osl-1.1.txt and is included herein + * by reference. + * + * Alternatively, the contents of this file may be used under the terms + * of the GNU General Public License version 2 (the "GPL") as distributed + * in the kernel source COPYING file, in which case the provisions of + * the GPL are applicable instead of the above. If you wish to allow + * the use of your version of this file only under the terms of the + * GPL and not to allow others to use your version of this file under + * the OSL, indicate your decision by deleting the provisions above and + * replace them with the notice and other provisions required by the GPL. + * If you do not delete the provisions above, a recipient may use your + * version of this file under either the OSL or the GPL. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include "scsi.h" +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "sata_sil" +#define DRV_VERSION "0.9" + +enum { + sil_3112 = 0, + sil_3114 = 1, + + SIL_FIFO_R0 = 0x40, + SIL_FIFO_W0 = 0x41, + SIL_FIFO_R1 = 0x44, + SIL_FIFO_W1 = 0x45, + SIL_FIFO_R2 = 0x240, + SIL_FIFO_W2 = 0x241, + SIL_FIFO_R3 = 0x244, + SIL_FIFO_W3 = 0x245, + + SIL_SYSCFG = 0x48, + SIL_MASK_IDE0_INT = (1 << 22), + SIL_MASK_IDE1_INT = (1 << 23), + SIL_MASK_IDE2_INT = (1 << 24), + SIL_MASK_IDE3_INT = (1 << 25), + SIL_MASK_2PORT = SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT, + SIL_MASK_4PORT = SIL_MASK_2PORT | + SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, + + SIL_IDE2_BMDMA = 0x200, + + SIL_INTR_STEERING = (1 << 1), + SIL_QUIRK_MOD15WRITE = (1 << 0), + SIL_QUIRK_UDMA5MAX = (1 << 1), +}; + +static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static void sil_dev_config(struct ata_port *ap, struct ata_device *dev); +static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); +static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); +static void sil_post_set_mode (struct ata_port *ap); + +static struct pci_device_id sil_pci_tbl[] = { + { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, + { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { } /* terminate list */ +}; + + +/* TODO firmware versions should be added - eric */ +static const struct sil_drivelist { + const char * product; + unsigned int quirk; +} sil_blacklist [] = { + { "ST320012AS", SIL_QUIRK_MOD15WRITE }, + { "ST330013AS", SIL_QUIRK_MOD15WRITE }, + { "ST340017AS", SIL_QUIRK_MOD15WRITE }, + { "ST360015AS", SIL_QUIRK_MOD15WRITE }, + { "ST380013AS", SIL_QUIRK_MOD15WRITE }, + { "ST380023AS", SIL_QUIRK_MOD15WRITE }, + { "ST3120023AS", SIL_QUIRK_MOD15WRITE }, + { "ST3160023AS", SIL_QUIRK_MOD15WRITE }, + { "ST3120026AS", SIL_QUIRK_MOD15WRITE }, + { "ST3200822AS", SIL_QUIRK_MOD15WRITE }, + { "ST340014ASL", SIL_QUIRK_MOD15WRITE }, + { "ST360014ASL", SIL_QUIRK_MOD15WRITE }, + { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, + { "ST3120022ASL", SIL_QUIRK_MOD15WRITE }, + { "ST3160021ASL", SIL_QUIRK_MOD15WRITE }, + { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX }, + { } +}; + +static struct pci_driver sil_pci_driver = { + .name = DRV_NAME, + .id_table = sil_pci_tbl, + .probe = sil_init_one, + .remove = ata_pci_remove_one, +}; + +static Scsi_Host_Template sil_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .eh_strategy_handler = ata_scsi_error, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, + .ordered_flush = 1, +}; + +static struct ata_port_operations sil_ops = { + .port_disable = ata_port_disable, + .dev_config = sil_dev_config, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .phy_reset = sata_phy_reset, + .post_set_mode = sil_post_set_mode, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = sil_scr_read, + .scr_write = sil_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, +}; + +static struct ata_port_info sil_port_info[] = { + /* sil_3112 */ + { + .sht = &sil_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SRST | ATA_FLAG_MMIO, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil_ops, + }, /* sil_3114 */ + { + .sht = &sil_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SRST | ATA_FLAG_MMIO, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil_ops, + }, +}; + +/* per-port register offsets */ +/* TODO: we can probably calculate rather than use a table */ +static const struct { + unsigned long tf; /* ATA taskfile register block */ + unsigned long ctl; /* ATA control/altstatus register block */ + unsigned long bmdma; /* DMA register block */ + unsigned long scr; /* SATA control register block */ + unsigned long sien; /* SATA Interrupt Enable register */ + unsigned long xfer_mode;/* data transfer mode register */ +} sil_port[] = { + /* port 0 ... */ + { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4 }, + { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4 }, + { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4 }, + { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4 }, + /* ... port 3 */ +}; + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) +{ + u8 cache_line = 0; + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line); + return cache_line; +} + +static void sil_post_set_mode (struct ata_port *ap) +{ + struct ata_host_set *host_set = ap->host_set; + struct ata_device *dev; + void *addr = host_set->mmio_base + sil_port[ap->port_no].xfer_mode; + u32 tmp, dev_mode[2]; + unsigned int i; + + for (i = 0; i < 2; i++) { + dev = &ap->device[i]; + if (!ata_dev_present(dev)) + dev_mode[i] = 0; /* PIO0/1/2 */ + else if (dev->flags & ATA_DFLAG_PIO) + dev_mode[i] = 1; /* PIO3/4 */ + else + dev_mode[i] = 3; /* UDMA */ + /* value 2 indicates MDMA */ + } + + tmp = readl(addr); + tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0)); + tmp |= dev_mode[0]; + tmp |= (dev_mode[1] << 4); + writel(tmp, addr); + readl(addr); /* flush */ +} + +static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_reg) +{ + unsigned long offset = ap->ioaddr.scr_addr; + + switch (sc_reg) { + case SCR_STATUS: + return offset + 4; + case SCR_ERROR: + return offset + 8; + case SCR_CONTROL: + return offset; + default: + /* do nothing */ + break; + } + + return 0; +} + +static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) +{ + void *mmio = (void *) sil_scr_addr(ap, sc_reg); + if (mmio) + return readl(mmio); + return 0xffffffffU; +} + +static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) +{ + void *mmio = (void *) sil_scr_addr(ap, sc_reg); + if (mmio) + writel(val, mmio); +} + +/** + * sil_dev_config - Apply device/host-specific errata fixups + * @ap: Port containing device to be examined + * @dev: Device to be examined + * + * After the IDENTIFY [PACKET] DEVICE step is complete, and a + * device is known to be present, this function is called. + * We apply two errata fixups which are specific to Silicon Image, + * a Seagate and a Maxtor fixup. + * + * For certain Seagate devices, we must limit the maximum sectors + * to under 8K. + * + * For certain Maxtor devices, we must not program the drive + * beyond udma5. + * + * Both fixups are unfairly pessimistic. As soon as I get more + * information on these errata, I will create a more exhaustive + * list, and apply the fixups to only the specific + * devices/hosts/firmwares that need it. + * + * 20040111 - Seagate drives affected by the Mod15Write bug are blacklisted + * The Maxtor quirk is in the blacklist, but I'm keeping the original + * pessimistic fix for the following reasons... + * - There seems to be less info on it, only one device gleaned off the + * Windows driver, maybe only one is affected. More info would be greatly + * appreciated. + * - But then again UDMA5 is hardly anything to complain about + */ +static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) +{ + unsigned int n, quirks = 0; + unsigned char model_num[40]; + const char *s; + unsigned int len; + + ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS, + sizeof(model_num)); + s = &model_num[0]; + len = strnlen(s, sizeof(model_num)); + + /* ATAPI specifies that empty space is blank-filled; remove blanks */ + while ((len > 0) && (s[len - 1] == ' ')) + len--; + + for (n = 0; sil_blacklist[n].product; n++) + if (!memcmp(sil_blacklist[n].product, s, + strlen(sil_blacklist[n].product))) { + quirks = sil_blacklist[n].quirk; + break; + } + + /* limit requests to 15 sectors */ + if (quirks & SIL_QUIRK_MOD15WRITE) { + printk(KERN_INFO "ata%u(%u): applying Seagate errata fix\n", + ap->id, dev->devno); + ap->host->max_sectors = 15; + ap->host->hostt->max_sectors = 15; + dev->flags |= ATA_DFLAG_LOCK_SECTORS; + return; + } + + /* limit to udma5 */ + if (quirks & SIL_QUIRK_UDMA5MAX) { + printk(KERN_INFO "ata%u(%u): applying Maxtor errata fix %s\n", + ap->id, dev->devno, s); + ap->udma_mask &= ATA_UDMA5; + return; + } +} + +static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + unsigned long base; + void *mmio_base; + int rc; + unsigned int i; + int pci_dev_busy = 0; + u32 tmp, irq_mask; + u8 cls; + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + /* + * If this driver happens to only be useful on Apple's K2, then + * we should check that here as it has a normal Serverworks ID + */ + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + memset(probe_ent, 0, sizeof(*probe_ent)); + INIT_LIST_HEAD(&probe_ent->node); + probe_ent->dev = pci_dev_to_dev(pdev); + probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops; + probe_ent->sht = sil_port_info[ent->driver_data].sht; + probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2; + probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask; + probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask; + probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask; + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags; + + mmio_base = ioremap(pci_resource_start(pdev, 5), + pci_resource_len(pdev, 5)); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_free_ent; + } + + probe_ent->mmio_base = mmio_base; + + base = (unsigned long) mmio_base; + + for (i = 0; i < probe_ent->n_ports; i++) { + probe_ent->port[i].cmd_addr = base + sil_port[i].tf; + probe_ent->port[i].altstatus_addr = + probe_ent->port[i].ctl_addr = base + sil_port[i].ctl; + probe_ent->port[i].bmdma_addr = base + sil_port[i].bmdma; + probe_ent->port[i].scr_addr = base + sil_port[i].scr; + ata_std_ports(&probe_ent->port[i]); + } + + /* Initialize FIFO PCI bus arbitration */ + cls = sil_get_device_cache_line(pdev); + if (cls) { + cls >>= 3; + cls++; /* cls = (line_size/8)+1 */ + writeb(cls, mmio_base + SIL_FIFO_R0); + writeb(cls, mmio_base + SIL_FIFO_W0); + writeb(cls, mmio_base + SIL_FIFO_R1); + writeb(cls, mmio_base + SIL_FIFO_W2); + } else + printk(KERN_WARNING DRV_NAME "(%s): cache line size not set. Driver may not function\n", + pci_name(pdev)); + + if (ent->driver_data == sil_3114) { + irq_mask = SIL_MASK_4PORT; + + /* flip the magic "make 4 ports work" bit */ + tmp = readl(mmio_base + SIL_IDE2_BMDMA); + if ((tmp & SIL_INTR_STEERING) == 0) + writel(tmp | SIL_INTR_STEERING, + mmio_base + SIL_IDE2_BMDMA); + + } else { + irq_mask = SIL_MASK_2PORT; + } + + /* make sure IDE0/1/2/3 interrupts are not masked */ + tmp = readl(mmio_base + SIL_SYSCFG); + if (tmp & irq_mask) { + tmp &= ~irq_mask; + writel(tmp, mmio_base + SIL_SYSCFG); + readl(mmio_base + SIL_SYSCFG); /* flush */ + } + + /* mask all SATA phy-related interrupts */ + /* TODO: unmask bit 6 (SError N bit) for hotplug */ + for (i = 0; i < probe_ent->n_ports; i++) + writel(0, mmio_base + sil_port[i].sien); + + pci_set_master(pdev); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_free_ent: + kfree(probe_ent); +err_out_regions: + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; +} + +static int __init sil_init(void) +{ + return pci_module_init(&sil_pci_driver); +} + +static void __exit sil_exit(void) +{ + pci_unregister_driver(&sil_pci_driver); +} + + +module_init(sil_init); +module_exit(sil_exit); |