diff options
author | Hannes Reinecke <hare@suse.de> | 2006-01-24 09:44:38 (GMT) |
---|---|---|
committer | James Bottomley <jejb@mulgrave.(none)> | 2006-01-31 20:39:48 (GMT) |
commit | 3fb086126462c2de06dddaec58981d8827be100d (patch) | |
tree | eaa3e79ef84f8a68246e0ba68a1d048b03e9acd4 /drivers/scsi | |
parent | 53467e636b7beb350c307cc88323aae4676577f2 (diff) | |
download | linux-3fb086126462c2de06dddaec58981d8827be100d.tar.xz |
[SCSI] aic79xx: SLOWCRC fix
This patch introduces the SLOWCRC handling for certain buggy chipsets.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi')
-rw-r--r-- | drivers/scsi/aic7xxx/aic79xx.h | 3 | ||||
-rw-r--r-- | drivers/scsi/aic7xxx/aic79xx_core.c | 21 | ||||
-rw-r--r-- | drivers/scsi/aic7xxx/aic79xx_osm.c | 17 | ||||
-rw-r--r-- | drivers/scsi/aic7xxx/aic79xx_pci.c | 11 |
4 files changed, 49 insertions, 3 deletions
diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h index 2cfdbef..1d11f7e 100644 --- a/drivers/scsi/aic7xxx/aic79xx.h +++ b/drivers/scsi/aic7xxx/aic79xx.h @@ -37,7 +37,7 @@ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * - * $Id: //depot/aic7xxx/aic7xxx/aic79xx.h#108 $ + * $Id: //depot/aic7xxx/aic7xxx/aic79xx.h#109 $ * * $FreeBSD$ */ @@ -222,6 +222,7 @@ typedef enum { typedef enum { AHD_FENONE = 0x00000, AHD_WIDE = 0x00001,/* Wide Channel */ + AHD_AIC79XXB_SLOWCRC = 0x00002,/* SLOWCRC bit should be set */ AHD_MULTI_FUNC = 0x00100,/* Multi-Function/Channel Device */ AHD_TARGETMODE = 0x01000,/* Has tested target mode support */ AHD_MULTIROLE = 0x02000,/* Space for two roles at a time */ diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index dfd4cc9..6114b3e 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -3332,6 +3332,15 @@ ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, con_opts |= WIDEXFER; /* + * Slow down our CRC interval to be + * compatible with packetized U320 devices + * that can't handle a CRC at full speed + */ + if (ahd->features & AHD_AIC79XXB_SLOWCRC) { + con_opts |= ENSLOWCRC; + } + + /* * During packetized transfers, the target will * give us the oportunity to send command packets * without us asserting attention. @@ -6740,6 +6749,18 @@ ahd_chip_init(struct ahd_softc *ahd) ahd_loadseq(ahd); ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); + + if (ahd->features & AHD_AIC79XXB_SLOWCRC) { + u_int negodat3 = ahd_inb(ahd, NEGCONOPTS); + + negodat3 |= ENSLOWCRC; + ahd_outb(ahd, NEGCONOPTS, negodat3); + negodat3 = ahd_inb(ahd, NEGCONOPTS); + if (!(negodat3 & ENSLOWCRC)) + printf("aic79xx: failed to set the SLOWCRC bit\n"); + else + printf("aic79xx: SLOWCRC bit set\n"); + } } /* diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 2567e29..815c063 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -314,6 +314,21 @@ static uint32_t aic79xx_seltime; */ uint32_t aic79xx_periodic_otag; +/* Some storage boxes are using an LSI chip which has a bug making it + * impossible to use aic79xx Rev B chip in 320 speeds. The following + * storage boxes have been reported to be buggy: + * EonStor 3U 16-Bay: U16U-G3A3 + * EonStor 2U 12-Bay: U12U-G3A3 + * SentinelRAID: 2500F R5 / R6 + * SentinelRAID: 2500F R1 + * SentinelRAID: 2500F/1500F + * SentinelRAID: 150F + * + * To get around this LSI bug, you can set your board to 160 mode + * or you can enable the SLOWCRC bit. + */ +uint32_t aic79xx_slowcrc; + /* * Module information and settable options. */ @@ -343,6 +358,7 @@ MODULE_PARM_DESC(aic79xx, " amplitude:<int> Set the signal amplitude (0-7).\n" " seltime:<int> Selection Timeout:\n" " (0/256ms,1/128ms,2/64ms,3/32ms)\n" +" slowcrc Turn on the SLOWCRC bit (Rev B only)\n" "\n" " Sample /etc/modprobe.conf line:\n" " Enable verbose logging\n" @@ -1003,6 +1019,7 @@ aic79xx_setup(char *s) { "slewrate", NULL }, { "precomp", NULL }, { "amplitude", NULL }, + { "slowcrc", &aic79xx_slowcrc }, }; end = strchr(s, '\0'); diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c index 196a634..757242e 100644 --- a/drivers/scsi/aic7xxx/aic79xx_pci.c +++ b/drivers/scsi/aic7xxx/aic79xx_pci.c @@ -38,7 +38,7 @@ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * - * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#89 $ + * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#92 $ */ #ifdef __linux__ @@ -950,12 +950,19 @@ ahd_aic790X_setup(struct ahd_softc *ahd) if ((ahd->flags & AHD_HP_BOARD) == 0) AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVA); } else { + /* This is revision B and newer. */ + extern uint32_t aic79xx_slowcrc; u_int devconfig1; ahd->features |= AHD_RTI|AHD_NEW_IOCELL_OPTS - | AHD_NEW_DFCNTRL_OPTS|AHD_FAST_CDB_DELIVERY; + | AHD_NEW_DFCNTRL_OPTS|AHD_FAST_CDB_DELIVERY + | AHD_BUSFREEREV_BUG; ahd->bugs |= AHD_LQOOVERRUN_BUG|AHD_EARLY_REQ_BUG; + /* If the user requested the the SLOWCRC bit to be set. */ + if (aic79xx_slowcrc) + ahd->features |= AHD_AIC79XXB_SLOWCRC; + /* * Some issues have been resolved in the 7901B. */ |